BPXH messages

BPXH002E
There are inconsistent sysplex parameters. In BPXPRMxx, SYSPLEX(NO) is being used, but the originator specified SYSPLEX for the parameter of check USS_FILESYS_CONFIG in HZSPRMxx.
BPXH003I
z/OS UNIX System Services was initialized using OMVS=(suffix), where each 2-character item is a BPXPRMxx suffix.
BPXH004I
No file systems are mounted; check_name could not be run.
BPXH005I
The automove configuration verification was not performed because the parameter specified NOPLEX for the parameter of check check_name in HZSPRMxx.
BPXH007E
File system file system is designated as AUTOMOVE, but the parent file system is not.
BPXH009I
No errors were detected in the file system configuration.
BPXH010E
check_name is not applicable because z/OS UNIX System Services is not available.
BPXH011E
There are inconsistent sysplex parameters. In BPXPRMxx, SYSPLEX(YES) is being used, but the parameter specified NOPLEX for the parameter of check check_name in HZSPRMxx. IBM SUGGESTION: NOPLEX reflects a single system image without file system sharing. The HZSPRMxx parameter for this check should be consistent with the BPXPRMxx SYSPLEX parameter.
BPXH012E
File system file system is designated as AUTOMOVE, but the parent file system has an automove configuration error.
BPXH013E
Service service failed with return code return_code and reason code reason_code while performing check check_name.
BPXH014E
The version file system file system is mounted read-write, but it should be mounted read-only.
BPXH015E
File system file system is designated as automove_setting, but it should be designated as AUTOMOVE.
BPXH016E
The sysplex root file system is mounted read-only and should be mounted read-write.
BPXH017E
System-specific file system file system is mounted read-only and should be mounted read-write.
BPXH018E
The system-specific file systemfile system should be designated as UNMOUNT.
BPXH020E
check_name received an unknown function code of function code from IBM Health Checker for z/OS.
BPXH021E
check_name received an unknown entry code of entry code from IBM Health Checker for z/OS.
BPXH023E
A call to the STORAGE OBTAIN service failed with return code rc.
BPXH024E
The user ID associated with hzsproc is not authorized to file system file system. This report is incomplete.
BPXH025E
File system file system does not support multilevel security. Unpredictable results will occur.
BPXH026I
The system-specific file system file system path path should be designated as UNMOUNT.
BPXH028E
The user ID associated with hzsproc is not defined to RACF.
BPXH029I
In BPXPRMxx, SYSPLEX(NO) is being used. check_name is cannot run in the current environment.
BPXH030E
Automount delay error detected for configuration confignameof automount managed directory directory
BPXH031I
No errors were found in the automount delay configurations.
BPXH032E
MAXFILEPROC value is too low.
BPXH033E
MAXSOCKETS value for AF_INET is too low.
BPXH034I
The value of value found for MAXFILEPROC meets the minimum parameter suggestion of check value.
BPXH035I
The value of value found for MAXSOCKETS (AF_INET) meets the minimum parameter suggestion of check value.
BPXH036I
The automount physical file system is not started.
BPXH037I
The AF_INET physical file system is not started.
BPXH038I
The Automount shell command has not been started.
BPXH039I
No differences were found between the system settings and the settings in the BPXPRMxx parmlib members.
BPXH040E
One or more differences were found between the system settings and the settings in the current BPXPRMxx parmlib members.
BPXH041I
The following differences were found between the system settings and the BPXPRMxx parmlib members: text
BPXH042I
Option BPXPRMxx Value System Value-----------------------------------------------------------
BPXH043I
option parmlibval sysval
BPXH044I
Physical File Systems not in parmlib-----------------------------------------------------------
BPXH045I
PfsName
BPXH046E
Syntax error(s) were found in the parmlib members.
BPXH047I
OptName-----------------------------------------------------------BPXPRMxx Value:parmvalSystem Value:sysval
BPXH048I
PriorityGoal-----------------------------------------------------------
BPXH049I
PGoal PGoal PGoal PGoal PGoal
BPXH050I
None
BPXH051I
ValType Value:
BPXH052I
PriorityPG-----------------------------------------------------------
BPXH053I
PG PG PG PG PG
BPXH054I
Changed File Systems-----------------------------------------------------------
BPXH055I
File System: filesys
BPXH056I
Path: mount point Automove: automove Access: access
BPXH057I
This file system is currently not mounted.
BPXH059I
The following file systems are not active: ----------------------------------------------------------- File System: filesystem Parmlib Member: parmlib Path: mountpoint Return Code: retcode Reason Code: rsncodeFile System: filesystem Parmlib Member: parmlib Path: mountpoint Return Code: retcode Reason Code: rsncode
BPXH061E
One or more file systems specified in the BPXPRMxx parmlib members are not mounted.
BPXH062I
All file systems specified by ROOT and MOUNT statements in the BPXPRMxx parmlib members used to configure z/OS UNIX System Services are mounted.
BPXH063I
The following file systems are available through a remote owner system: ----------------------------------------------------------- File System: filesystem Mount Mode: mountmode PFS Type: PFStypeFile System: filesystem Mount Mode: mountmode PFS Type: PFStype
BPXH065E
One or more file systems that should be locally mounted are available through a remote system.
BPXH066I
All file systems that can be locally mounted in the shared file system configuration are accessed locally.
BPXH067I
No HFS file systems are mounted.
BPXH068E
One or more HFS file systems mounted.
BPXH069I
The following HFS file systems were found: filesystemfilesystemfilesystem
BPXH070I
filesystem
BPXH071E
The z/OS UNIX System Services kernel usage of autodata cellpool cells has exceeded the check threshold of stacksthresholdpct%. Currently stacksused of the maximum stacksmax (stacksusedpct%) cells are in use.
BPXH072E
The z/OS UNIX System Services kernel usage of monitored below the bar private storage has exceeded the check threshold of thresholdpvtstgpct%. Currently allocpvtstg of maxpvtstg bytes (allocpvtstgpct%) of monitored private storage has been allocated.
BPXH073I
The check threshold of z/OS UNIX System Services kernel usage of autodata cellpool cells is defined as stackthresholdpct%. Currently stacksused of the maximum stacksmax cells (stacksusedpct%) are in use.
BPXH074I
The check threshold of z/OS UNIX System Services kernel usage of monitored below the bar private storage is defined as thresholdpvtstgpct%. Currently allocpvtstg of maxpvtstg bytes (allocpvtstgpct%) of monitored private storage has been allocated.
BPXH075I
KERNELSTACKS(ABOVE) was specified in the BPXPRMxx parmlib members during IPL. USS_KERNEL_STACKS_THRESHOLD is not valid in the current environment.
BPXH076I
KERNELSTACKS(BELOW) was specified in the BPXPRMxx parmlib members during IPL. USS_KERNEL_RESOURCES_THRESHOLD is not valid in the current environment.
BPXH077E
A z/OS UNIX System Services resource has reached its defined threshold.
BPXH078I
The following resources are being monitored:−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−resource usage/total (pct%) resource usage/total (pct%)
BPXH080E
A problem was found with the SUPERUSER value of userID.
BPXH081I
The following problem was found with the SUPERUSER parmlib statement:reason
BPXH086I
No problems were found with userID userid.
BPXH087I
The inetd daemon is not active.
BPXH088I
No unsecure services were found in the inetd daemon configuration.
BPXH089E
Unsecure services were found in the inetd daemon configuration.
BPXH090I
The following configured inetd daemon services are unsecure: ––––––––––-–––––--------------------------------------------------------------- service_name service_name service_name service_name
BPXH095I
Alternate root not found.
BPXH096I
Alternate root out of sync with the current root.
BPXH097I
Path path is not a directory.
BPXH098I
Mount point mountpoint has permissions permissions when expecting expected.
BPXH099I
mountpoint is not a mount point.
BPXH100I
mountpoint should be mounted read-only.
BPXH101I
type is mounted on mountpoint when a expected was expected.
BPXH102I
The path path could not be resolved.
BPXH103I
The following description were found within directory that are not within the recommended configuration of z/OS UNIX System Services.–––––––––-–––––––––––––––––––––––––––––––––––––––––––––––––––––----nodenodenode
BPXH104I
node
BPXH105I
No configuration problems found within z/OS UNIX System Services.
BPXH106E
z/OS UNIX System Services configuration under error.
BPXH901I
Volume ROOT_FS_VOLUME on which your root file system (ROOT_FS_DSN) is stored has ROOT_FS_VOLSIZE cylinders of unused space. The percentage of free space on this volume is ROOT_FS_VOLSIZE_PERCENT. This unused space is expected to be acceptable for migration.
BPXH902E
The volume on which your root file system is stored has ROOT_FS_VOLSIZE cylinders of unused space at a percentage of ROOT_FS_VOLSIZE_PERCENT free space. This unused space is not expected to be acceptable for migration.
BPXH903I
The version root file system data set is SMS-managed. This migration check is not applicable.
BPXH904E
The parameter MIN_CYLINDERS was not a valid parameter. Make sure the MIN_CYLINDERS parameter is a number between 500-1 000 000.
BPXH905E
CHECK(IBMSS_ZOSMIGREC_ROOT_FS_SIZE) encountered an internal problem with a volume.
BPXH906E
Check error. CHECK(IBMSS_ZOSMIGREC_ROOT_FS_SIZE) encountered an internal problem with the file system name.
BPXH907I
DEBUG_MESSAGE
BPXH910I
The directory DIR_VERIFIED is not customized.
BPXH911I
The ENTRY_TYPE DIR_VERIFIED has a symbolic link to TARGET_LINK.
BPXH912I
The directory DIR_VERIFIED has additional files, directories, or symbolic links found as follows:
BPXH914R
EXTRA_FILE
BPXH913I
All directories verified were found to be acceptable for the new symbolic links added in z/OS V1R13. A migration action is not required.
BPXH915E
One or more of the directories verified were found to contain post-install customization that is expected to be affected by the new symbolic links added in z/OS V1R13, or there were problems accessing the directory. A migration action is required.
BPXH916I
The user does not have appropriate authority to DIR_VERIFIED.
BPXH920I
The ENTRY_TYPE DIR_VERIFIED is customized to the /var directory.