This topic lists, for each DFSMSrmm WTOR message, information that
you should consider when deciding what changes (if any) you want to
implement in your AUTOR
xx member:
- Message number and text
- Severity (None, Low, Medium, High) indicates the level
of impairment to the operation of DFSMSrmm and its ability to manage
tape processing if the operator does not respond to the WTOR or gives
an inappropriate response (for example CANCEL, IGNORE).
- Tape Processing stopped? shows whether tape use is prevented
while this WTOR is outstanding.
- Parallel mode shows the delay in seconds
(s) or minutes (m) and the provided reply for this WTOR when PARMLIB(AUTORRP)
is in effect
- Production mode shows the delay in seconds
(s) or minutes (m) and the provided reply for this WTOR when PARMLIB(AUTORRM)
is in effect
- Additional comments about each message.
For more information about the messages in this topic, refer
to
z/OS MVS System Messages, Vol 5 (EDG-GFS) and to the DFSMSrmm operator procedures topic in
z/OS DFSMSrmm Managing and Using Removable Media.
- EDG0103D DFSMSrmm SUBSYSTEM INTERFACE IS INACTIVE - ENTER "IGNORE",
"CANCEL" OR "RETRY"
-
- Severity
- None
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: RETRY
- Production mode
- Delay: 1m Reply: RETRY
This message is normal for starting RMM after IPL
if you have not included INITRTN(EDGSSSI) in the IEFSSNxx parmlib
entry for the rmm subsystem
- EDG0107A ENTER SUFFIX OF INITIALIZATION MEMBER OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: P0
- Production mode
- Delay: 1m Reply: 00
If INITRTN(EDGSSSI) was specified in IEFSSNxx or
you already successfully started DFRMM since IPL you cannot use tape
until DFRMM starts successfully
- EDG0110D ENTER TODAY'S DATE WITH FORMAT date_string OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- N/A
- Production mode
- N/A
There is no pre-selected response for WTOR EDG0110D
because we recommend you do not use system automation to reply. You
should use other facilities, such as the DFSMSrmm OPTION IPLDATE(NO),
to ensure the correct systems date.
- EDG0115D THE DFSMSrmm SUBSYSTEM IS NOT RUNNING UNDER A JOB ENTRY
SYSTEM - SOME DFSMSrmm FUNCTIONS ARE NOT AVAILABLE. REPLY "IGNORE"
OR "CANCEL"
-
- Severity
- Medium
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: IGNORE
- Production mode
- Delay: 1m Reply: CANCEL
Next time ensure DFRMM is started under JES in
order to get full functional capability. REPLY "IGNORE" if you do
not need the JES facilities.
- EDG0117D DFSMSrmm DYNAMIC INSTALLATION EXITS INITIALIZATION FAILED
- REPLY "IGNORE", "CANCEL" OR "RETRY"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: IGNORE
- Production mode
- Delay: 1m Reply: CANCEL
In production environment do not run rmm if any
of the required installation exits cannot be initialized correctly
- EDG0123D function FOUND TO BE ACTIVE ON SYSTEM system_name - REPLY "Y" TO RESET STATUS OR "N"
-
- Severity
- Medium
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: N
- Production mode
- Delay: 5m Reply: N
Determine if RMM housekeeping is running on the
system specified in the message. If so, reply "N". If RMM housekeeping
failed on the system specified in the message, or the system has been
reset then reply "Y"
- EDG0127D RECOVERY OF CONTROL DATA SET ON date AT time POSSIBLY INCOMPLETE - REPLY "CONTINUE"
OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: CONTINUE
- Production mode
- Delay: 5m Reply: CANCEL
CDS recovery was incomplete. Run EDGUTIL VERIFY
to clean up or repeat the recovery process.
- EDG0215D ERRORS DETECTED IN INITIALIZATION PARAMETERS - ENTER
"Y" TO CONTINUE OR "N" TO CANCEL
-
- Severity
- Medium
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: Y
- Production mode
- Delay: 2m Reply: N
Reply "Y" in parallel, Reply "N" in production.
Correct parmlib members for next start up.
- EDG0228D REUSEBIN(STARTMOVE) REQUIRES EXTENDED BIN ENABLED - USING
(CONFIRMMOVE) - REPLY .CONTINUE. OR .CANCEL.
-
- Severity
- Medium
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: Y
- Production mode
- Delay: 2m Reply: CANCEL
Reply CONTINUE in parallel and CANCEL in production
- EDG0358D SERVER server_name COMMUNICATION ERROR
- REPLY "CANCEL", OR "RETRY"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 10m Reply: CANCEL
- Production mode
- Delay: 10m Reply: CANCEL
This WTOR will be handled automatically by DFSMSrmm
with automated retry. IF TCP/IP is not working reply CANCEL
- EDG0361D SERVER STARTUP ERROR - REPLY "RETRY" OR "IGNORE"
-
- Severity
- Medium
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 10m Reply: IGNORE
- Production mode
- Delay: 10m Reply: RETRY
This WTOR will be handled automatically by DFSMSrmm
with automated retry. IF TCP/IP is not working reply IGNORE
- EDG1107D REQUESTS WAIT TO BE PROCESSED - REPLY "STOP", "QUIESCE",
"RESTART", OR "M=xx"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: STOP
- Production mode
- Delay: 2m Reply: RESTART
You stopped DFRMM while QUIESCED. Reply STOP in
parallel and RESTART or M=xx in production
- EDG1200D I/O ERROR ON CONTROL DATA SET WHEN PROCESSING MESSAGE msg_number, REPLY EITHER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 30s Reply: CANCEL
- Production mode
- Delay: 30s Reply: CANCEL
Low on scratch processing is not needed in parallel,
and in production cannot wait during a WTO
- EDG1203D INVENTORY MANAGEMENT PREVENTED PROCESSING OF MESSAGE msg_number, REPLY EITHER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 30s Reply: CANCEL
- Production mode
- Delay: 30s Reply: CANCEL
Low on scratch processing is not needed in parallel,
and in production cannot wait during a WTO
- EDG2103D PERMANENT JOURNAL ERROR - REPLY "R" TO RETRY, "I" TO
IGNORE, "D" TO DISABLE OR "L" TO LOCK
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 30s Reply: D
- Production mode
- Delay: 30s Reply: L
In parallel - Reply "D" (disable) the journal.
In production we cannot allow any tape usage without the journal,
so reply L (lock). Notify the system programmer to run EDGHSKP BACKUP
to re-enable the journal.
- EDG2106D JOURNAL AND CONTROL DATASET DO NOT MATCH - REPLY "C"
TO CANCEL, "D" TO DISABLE OR "L" TO LOCK
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 30s Reply: D
- Production mode
- Delay: 30s Reply: L
Reply LOCK and notify the system programmer to
run EDGHSKP BACKUP to re-enable the journal.
- EDG3213D ANOTHER GETVOLUME CURRENTLY IN PROGRESS - ENTER "RETRY",
"CANCEL", OR "IGNORE"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 30s Reply: RETRY
- Production mode
- Delay: 30s Reply: RETRY
Reply "RETRY" until GETVOLUME satisfied.
- EDG4000D JOURNAL FILE IS LOCKED DURING action FOR volser BY jobname, stepname, ddname; ENTER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 30s Reply: CANCEL
- Production mode
- Delay: 2m Reply: RETRY
Reply "RETRY" so production tape process is good
and run EDGHSKP BACKUP to re-enable the journal ASAP
- EDG4008A SECURE security_number VOLUME volser IN USE BY jobname, stepname, ddname REPLY WHEN READY
-
- Severity
- Medium
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: U
- Production mode
- N/A
Reply to allow rmm processing to continue and review
your SECCLS definitions. In production this WTOR is not automated.
You should follow your local procedures.
- EDG4010D BACKUP IN PROGRESS DURING action FOR volser BY jobname, stepname, ddname; ENTER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
Reply "RETRY" so production tape process is good.
Switch to using a non-intrusive backup technology with EDGHSKP BACKUP(DSS)
- EDG4012D DFSMSrmm INACTIVE FOR action volser BY jobname, procname, stepname, ddname; ENTER "RETRY",
"CANCEL" OR "CONTINUE"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: CONTINUE
- Production mode
- Delay: 1m Reply: RETRY
You should start DFRMM and the system automatically
continues processing, or Reply "RETRY" so production tape processing
is good.
- EDG6605D JOURNAL FILE IS LOCKED DURING DFSMSrmm SUBSYSTEM PROCESSING
- ENTER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 10m Reply: RETRY
Reply "RETRY" so production tape process is good
and run EDGHSKP BACKUP to re-enable the journal ASAP
- EDG6607D INVENTORY MANAGEMENT FUNCTIONS ARE ACTIVE - ENTER "RETRY"
OR "CANCEL"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 10m Reply: RETRY
Reply "RETRY" so production tape process is good.
- EDG6609D FAILURE DURING DFSMSrmm SUBSYSTEM PROCESSING - ENTER
"RETRY" OR "CANCEL"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 10m Reply: RETRY
Reply "RETRY" so production tape process is good.
- EDG6626A SPECIFY VOLUME "INIT" OR "ERASE" COMMAND OR "END"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 10m Reply: END
- Production mode
- Delay: 10m Reply: END
Reply "END" if no reply from anyone after a few
minutes.
- EDG6627A M drive_number V(volser) R(rack_number) TO BE action vol1_volser, label_type
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 10m Reply: S
- Production mode
- Delay: 10m Reply: S
Reply "S" if volume not mounted after a few minutes.
- EDG6628A drive_number, REPLY WITH RACK NUMBER
OR VOLUME SERIAL NUMBER FOR NL VOLUME
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- N/A
- Production mode
- N/A
There is no pre-selected response for WTOR EDG6628A.
There is no impact to tape processing, and the operator must verify
the mounted tape in order to reply.
- EDG6629D DFSMSrmm SUBSYSTEM NOT ACTIVE - ENTER "RETRY" OR "CANCEL"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: CANCEL
EDGINERS is not needed if RMM is not active.
- EDG6663D drive_number, REPLY "R" TO RETRY OR
"F" TO FAIL THE REQUEST, OR "A" TO ACCEPT THE MOUNTED VOLUME
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 10m Reply: F
- Production mode
- Delay: 10m Reply: F
Fail the EDGINERS request if operator does not
handle.
- EDG6671D drive_number, ERROR PROCESSING VOLUME volser, REP "S" TO SKIP, "F" TO FAIL OR "R" TO RETRY
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- No
- Parallel mode
- Delay: 10m Reply: F
- Production mode
- Delay: 10m Reply: F
Fail the EDGINERS request if operator does not
handle.
- EDG8008D DFSMSrmm I/O ERROR DURING task function REQUEST FOR volser - ENTER
"RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGTVEXT - DFRMM is probably QUIESCEd. Automation
should start DFRMM again, meanwhile we RETRY
- EDG8010D BACKUP IN PROGRESS DURING task function REQUEST FOR volser - ENTER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGTVEXT - Reply RETRY so production tape is good.
Ensure EDGHSKP uses BACKUP(DSS) with concurrent copy.
- EDG8011D DFSMSrmm SUBSYSTEM IS NOT ACTIVE DURING task function REQUEST FOR volser - ENTER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGTVEXT - Reply RETRY so production tape is good
- ensure DFRMM is always active
- EDG8013D DFSMSrmm JOURNAL FILE IS LOCKED DURING task function REQUEST FOR volser - ENTER "RETRY" OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGTVEXT - Reply RETRY so production tape is good.
Run EDGHSKP BACKUP(DSS) to empty and enable the journal.
- EDG8102D DFSMSrmm SUBSYSTEM NOT ACTIVE DURING function PROCESSING FOR volser - ENTER "RETRY", "IGNORE",
OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: IGNORE
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY so production tape is good.
This occurs when SMS tape is in use and volume not in library.
- EDG8108D DFSMSrmm I/O ERROR DURING function PROCESSING FOR VOLUME volser - ENTER "RETRY"
OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY so production tape is good.
- EDG8110D BACKUP IN PROGRESS DURING function PROCESSING FOR VOLUME volser - ENTER "RETRY"
OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY so production tape is good
and ensure EDGHSKP uses BACKUP(DSS) with concurrent copy.
- EDG8113D DFSMSrmm JOURNAL FILE IS LOCKED DURING function PROCESSING FOR VOLUME volser - ENTER "RETRY"
OR "CANCEL"
-
- Severity
- High
- Tape Processing Stopped?
- Yes
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY so production tape is good.
Run EDGHSKP BACKUP(DSS) to empty and enable the journal.
- EDG8121D ENTERvolume req_volser INTO LIBRARY lib_name AND REPLY "RETRY", OTHERWISE
REPLY "CANCEL" OR "CONTINUE"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CONTINUE
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY and let operator enter the
tape.
- EDG8122D ENTER volume req_volser INTO LIBRARY lib_name AND REPLY "RETRY", OTHERWISE
REPLY "CANCEL"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY and let operator enter the
tape.
- EDG8123D LOGICAL VOLUME req_volser EXPORTED
IN STACKED VOLUME stack_volser LOCATION loc_name SHELF shelf_number HOME LOCATION
home - IMPORT VOLUME TO LIBRARY lib_name AND REPLY
"RETRY", OTHERWISE REPLY "CANCEL"
-
- Severity
- Low
- Tape Processing Stopped?
- No
- Included in AUTOR00 ?
- Yes
- Parallel mode
- Delay: 1m Reply: CANCEL
- Production mode
- Delay: 1m Reply: RETRY
EDGLCSUX - Reply RETRY and let operator enter the
tape.