|
- Reason Code
- Description
- 0001
- DEVINFO: Unable to complete request with the return area provided.
Return code: 4.
- 0002
- DEVINFO: Some of the returned entries have nonzero response codes.
Return code: 8.
- 0003
- DEVINFO: Caller provided a bad parameter in the parameter list.
Return code: 12.
- 0004
- DEVINFO: Internal error was encountered. Return code: 16.
- 0005
- Unexpected return code (DGTCDSAP) or (DGTCVAAP) came from routines
called by the data set or volume application component.
- 0006
- Errors occurred during previous processing. Check the previous
log entries for detailed error information.
- 0007
- List source is invalid. It should be either VTOC or CATALOG.
- 0008
- TRKCALC macro failed. Return code: 4.
- 0009
- Automatic data area is in use. An ISMF common service routine
was entered and the frozen storage for its automatic data area was
already in use.
- 0010
- Selection criteria is invalid and will produce an empty list.
- 0011
- Filter criteria is invalid and will produce an empty list.
- 0012
- Prolog failure: Storage for the invoking module's automatic data
area was not obtained.
- 0013
- Epilog failure: Invoking module's automatic data area could not
be freed.
- 0014
- Panel number is invalid. A valid panel number is 1, 2, or 3.
- 0015
- Invalid command is not detected by the command check routine.
- 0016
- Convert Utility: Target data length must be 4 bytes or less when
converting a character string to its fixed binary representation.
- 0017
- Convert Utility: Invalid character was found in the data to be
converted. Data conversion could not take place. In some cases, imbedded
blanks are invalid.
- 0018
- Desired DAB was not found in the DAB list.
- 0019
- Data to be converted contained all blanks and could not be converted.
- 0020
- TBADD: Severe table error. Return code: 20.
- 0021
- TBADD: Table is not open. Return code: 12.
- 0022
- TBADD: Numeric convert error. Return code: 16.
- 0023
- TBCREATE: Severe table error. Return code: 20.
- 0024
- TBCREATE: Table is in use and ENQ failed. Return code: 12.
- 0025
- TBCREATE: Table already exists. REPLACE was not specified. Return
code: 8.
- 0026
- TBDELETE: Severe table error. Return code: 20.
- 0027
- TBDELETE: Table is not open. Return code: 12.
- 0028
- TBDELETE: CRP was at top (0) and remains at top. Return code:
8.
- 0029
- TBEND: Severe table error. Return code: 20.
- 0030
- TBEND: Table is not open. Return code: 12.
- 0031
- TBGET: Severe table error. Return code: 20.
- 0032
- TBGET: Table is not open. Return code: 12.
- 0033
- TBGET: Variable value was truncated, or insufficient space was
provided to return all extension variable names. Return code:16.
- 0034
- TBGET: CRP was at top (0) and remains at top. Return code: 8.
- 0035
- Convert utility: Source data length must be 2 bytes when converting
data set organization from the DSCB format to the list format.
- 0036
- TBSCAN: Severe table error. Return code: 20.
- 0037
- TBSCAN: Table is not open. Return code: 12.
- 0038
- TBSCAN: Row does not exist. No match was found and CRP is set
to top (0). Return code: 8.
- 0039
- TBSCAN: Variable value was truncated, or insufficient space was
provided to return all extension variable names. Return code: 16.
- 0040
- Convert utility: Target length must be at least 3 bytes to hold
the converted DSORG value.
- 0041
- Convert utility: Source data length must be 1 byte when converting
allocation unit from the DSCB format to the ISMF list format.
- 0042
- Convert utility: Target data length must be at least 3 bytes to
hold the converted allocation unit.
- 0043
- Convert utility: Allocation unit could not be determined from
the input.
- 0044
- Convert utility: Source data length for converting record format
is invalid. It must be 1 byte.
- 0045
- Convert utility: Target data length must be at least 5 bytes to
hold the converted record format.
- 0046
- Convert utility: Record format could not be determined from the
input.
- 0047
- Convert utility: Source data length must be 1 byte when converting
the allocation unit from the catalog format to the ISMF list format.
- 0048
- Convert utility: Source data length must be at least 3 bytes to
convert the allocation unit into the corresponding bit mapping.
- 0049
- Convert utility: Target data length must be at least 1 byte to
convert the allocation unit into the corresponding bit mapping.
- 0050
- Convert utility: Source data length must be 4 bytes when converting
device type from the UCB to the ISMF list format.
- 0051
- RETRY routine is in control.
- 0052
- No storage was allocated. Return code: 4.
- 0053
- Real storage is not available to back request. Return code: 8.
- 0054
- Unexpected error occurred while processing ESTAE. Return code:
16.
- 0055
- ESTAE macro was unable to obtain storage for an SCB. Return code:
20.
- 0056
- Level of DFDSS was not returned by DGTFMDO3.
- 0057
- Level of DFHSM was not returned by DGTFMDO4.
- 0058
- Not all storage is freed. Return code: 4.
- 0059
- Delete request was not issued. Return code: 4.
- 0060
- Level of DFDSS could not be determined by the DFDSS ADRMCLVL macro. X'04' was
passed back in the high order byte in register 1 by the ADRMCLVL macro,
indicating that it was unable to determine the current level of DFDSS.
- 0061
- LOAD macro failed. Control was given to the error routine specified
in the LOAD macro invocation. Return code: 4.
- 0062
- ISPF select failed. Specified panel could not be found. Return
code: 12.
- 0063
- Unable to build the error table (ERTB).
- 0064
- No exits exist for this TCB. Return code: 12.
- 0065
- ISPF SETMSG failed. Panel message not found or syntax is invalid.
Return code: 12.
- 0066
- ISPF SETMSG service failed. Severe error occurred in processing
ISPF SETMSG service. Return code: 20.
- 0067
- ISPF log failed. Log message invalid or not found. Return code:
12.
- 0068
- ISPF log failed. Severe error in ISPF log service. Return code:
20.
- 0069
- Unable to build the inter-module trace table (IMTT).
- 0070
- Unable to build the load list block (LLBL).
- 0071
- Unable to build the storage control table (SCT).
- 0072
- Unable to build the service routine vector table (SRVT).
- 0073
- Unable to build the trace point trace table (TPTT).
- 0074
- ISPF select failed. Truncation error in storing the ZCMD or ZSEL
variable. Return code: 16.
- 0075
- ISPF select failed. Severe error. Return code: 20.
- 0076
- Invalid return code received from ISPF select.
- 0077
- Invalid logging type was passed to the ISMF log utility.
- 0078
- Convert utility: Target data length must be at least 7 bytes when
converting the device type from the UCB into the ISMF list format.
- 0079
- Convert utility: Device type could not be determined from the
data.
- 0080
- Convert utility: Source data length must be 7 bytes when converting
the device type from the ISMF list form to the UCB form.
- 0081
- Convert utility: Target data length must be 4 bytes when converting
the device type from the ISMF list form to the UCB form.
- 0082
- Convert utility: Source data length must be 1 byte when converting
the DSCB change indicator bit into an EBCDIC character string .
- 0083
- Convert utility: Target data length must be at least 3 bytes when
converting the DSCB change indicator bit into an EBCDIC character
string.
- 0084
- Convert utility: Source data length for converting the option
code field of a DSCB (DS1OPTCD) into a character string must be 1
byte.
- 0085
- Convert utility: Target data length for converting the option
code field of a DSCB (DS1OPTCD) into a character string must be at
least 1 byte.
- 0086
- Convert utility: Source data length must be 4 bytes when converting
a fullword fixed binary number representing bytes into the corresponding
kilobyte representation.
- 0087
- Convert utility: Source data length must be 3 bytes when converting
a fixed binary date into its character string representation.
- 0088
- Convert utility: Target data length must be at least 8 bytes to
hold a converted date in its character string format, 'YY/MM/DD'.
- 0089
- Convert utility: Specified source index is invalid.
- 0090
- Convert utility: Specified target index is invalid.
- 0091
- Convert utility: Invalid year was found when performing a date
conversion.
- 0092
- Convert utility: Invalid month was found when performing a date
conversion.
- 0093
- Convert utility: Invalid day was found when performing a date
conversion.
- 0094
- Convert utility: Source data length must be 8 bytes when converting
a date in the character string format, 'YY/MM/DD', into a fixed packed
decimal format, 'YYDDDS', where S is the sign digit.
- 0095
- Convert utility: Target data length must be 3 bytes when converting
a date in the character string format, 'YY/MM/DD', into a fixed packed
decimal format, 'YYDDDS', where S is the sign digit.
- 0096
- Convert utility: Source data length can be a maximum of 8 bytes
when converting a character string to its fixed binary representation.
- 0097
- Convert utility: Source data length must be 3 bytes when converting
a date in packed decimal format to its character string representation
of 'YY/MM/DD'.
- 0098
- Link SVC failed.
- 0099
- Convert utility: Undetermined data set organization.
- 0100
- Convert utility: Unable to load the conversion translate table
(CTTB).
- 0101
- Invalid scroll amount, the valid format is: P (page); H (half);
D (data); M (maximum); C (cursor); NNNN (a number from 1 to 9999).
- 0102
- Command not found in the application command table.
- 0103
- One or more commands not found in the application command table.
- 0104
- Command processor parameter list pointer=0.
- 0105
- Application command table pointer=0.
- 0106
- Command table anchor block pointer=0.
- 0107
- Array name pointer=0.
- 0108
- Format name pointer=0.
- 0109
- Command line pointer=0.
- 0110
- Unexpected error occurred in external routine.
- 0111
- Command line length=0.
- 0112
- Command length is invalid.
- 0113
- Command specified is in disable status in the application command
table.
- 0114
- Panel type is invalid. Function only supports a list panel.
- 0115
- Command/line operator control blocks chain is not 0 before storage
is freed.
- 0116
- Application ID is invalid.
- 0117
- No application table is being loaded.
- 0118
- When the hide pending mode is on, no list command is allowed.
- 0119
- Termination type is invalid.
- 0120
- Command table initialization failed.
- 0121
- Command table entry count=0.
- 0122
- Error occurred while command processor was trying to process the
error routine.
- 0123
- CTABCLCB is not equal to CPPLCLCB.
- 0124
- Nonzero return code came from ISPF control service.
- 0125
- Reserved for command processor.
- 0126
- Invalid storage size passed to the get-memory routine.
- 0127
- Invalid storage ID passed to the get-memory routine.
- 0128
- Unexpected column name found in DAB. DABs may be out of order.
- 0129
- Invalid cursor control block chained from the command processor
parameter list (CPPL).
- 0130
- Invoker's APID does not match current CTABAPID.
- 0131
- Invoker's APID was not found in the CTAB chain.
- 0132
- Two CTABs have duplicate APIDs that match the invoker's APID.
- 0133
- Nonzero return code was passed back from the invoked CLIST.
- 0134
- Specified CLIST name was too long. CLIST name must be 1 to 8 characters
long (optionally preceded by '%').
- 0135
- ISPF/PDF edit failed. Specified member was not found. Return code:
14.
- 0136
- ISPF/PDF edit failed. Data was zero length (empty sequential data
set or zero length member of a partitioned data set). Return code:
12.
- 0137
- Nonzero return code was passed back from the specified CLIST.
- 0138
- Invalid system completion code was passed in the retry work area.
- 0139
- Incorrect number of parameters was specified.
- 0140
- Member name specified is too long.
- 0141
- TBSAVE: Table is not open. Return code: 12.
- 0142
- TBSAVE: Table output library is not open. Return code: 16.
- 0143
- TBSAVE: Severe error. Return code: 20.
- 0144
- TBSAVE: Unexpected return code.
- 0188
- Convert utility: The target data length must be at least 10 bytes
to hold a converted date in its character string format YYYY/MM/DD.
- 0189
- Convert utility: An invalid century and year in the format YYYY
was found when performing a date conversion.
- 0190
- Convert utility: An invalid century was found when performing
a date conversion.
- 0191
- Convert utility: An invalid century was found when performing
a date conversion.
- 0197
- Convert utility: The source data length must be 4 bytes when converting
a date in packed decimal format to its character string representation
of YYYY/MM/DD.
- 0200
- Line operator anchor block pointer=0.
- 0201
- List command and line operator conflict.
- 0202
- Line operator was not found in the application line operator table.
- 0203
- Entry in the line operator field is greater than 10 characters.
- 0204
- Record format is not F or FB.
- 0205
- Program failed because of a failure in the invoked external routine.
Refer to the failed external routine problem determination area.
- 0206
- Application line operator table pointer=0.
- 0207
- Line operator processor work area pointer=0.
- 0208
- Invalid return code from ISPF/PDF browse service.
- 0209
- Duplicate table entry found while loading the table entries. Only
one of the duplicates is loaded.
- 0210
- Line operator initialization failed.
- 0211
- Line operator processor failed due to multiple errors.
- 0212
- Operator line length is invalid.
- 0213
- Line operator field length=0.
- 0214
- DGTFLPP3 rewrite the saved ERTB entry so that the error message
can be displayed on screen.
- 0215
- TOTLINES field is zero.
- 0216
- Line operator does not have 'H' in column one but is asking DGTFLPP2
to check whether it is a hide line operator.
- 0217
- LPP2ALL and LPP2HI flags are off. No checking or verification
is done by this program.
- 0218
- Return code from DGTEFOFI is zero, but no value returned to entry
number filed. Invalid combination of return code and value returned.
- 0219
- Caller's ID is invalid. Valid IDs are 'CT', 'LP'.
- 0220
- Invalid value in LOOPCNT.
- 0224
- CSRFLAG value is not 1 and not -1. It is an invalid and unexpected
value.
- 0225
- Invalid return code came from ISPF/PDF edit.
- 0226
- ISPF control service failed.
- 0227
- Invalid value specified.
- 0230
- No invocation is set for the hide line operator. LPPLHIDE is off.
- 0231
- Hide amount is not numeric.
- 0232
- LAI address (LPPLLAIA) is 0.
- 0233
- Line operator does not have 'H' at column one and is not a hide
line operator.
- 0234
- No entry in the list area image to be processed. LPPLLAIT is less
than 1.
- 0235
- Hide range exceeds allowable maximum of 99999.
- 0236
- LPPLENT is less than 1.
- 0237
- Hide amount overlaps another pending line operator.
- 0238
- HIDEAMT=0.
- 0239
- HIDEAMT is not in the allowable range, 1 to 99999.
- 0240
- LPPLENT is greater than LPPLLAIT.
- 0241
- CSRFLAG is off when there is entry in the list area image.
- 0242
- LPPLROWA=0.
- 0243
- LPCBENO=0.
- 0244
- Entry number in LPAB (LPCBENO) is greater than the size of the
LAI.
- 0245
- LPCB address is 0.
- 0246
- Invalid value returned from format service. Valid values are 'Y'
or 'N'. NAE of the format service can be found in the ISPF log.
- 0250
- Invalid FIND parameter: ISMF user did not enter a column tag.
- 0251
- Invalid command parameter: Only one parameter is accepted for
this command.
- 0254
- Invalid cursor position: Cursor is placed between the data columns
in the list area. This is invalid for scrolling with the cursor position.
- 0255
- Value of the scroll variable is invalid.
- 0256
- Area name from LPCB is invalid.
- 0301
- Format service anchor block (FSAB) does not exist. Pointer to
FSAB in the global data repository block (GDRB) is 0.
- 0302
- Format anchor block (FAB) was not found. No match of format name
and array name exists in a FAB.
- 0303
- Control block structure with the same format and array name already
exists.
- 0304
- Variables of list area (VLA) are invalid. VLA may be incomplete.
- 0305
- Input parameter number of entries (ENTNUM) is invalid. Value is
greater than the total number of entries in the LAI or is a negative
number.
- 0306
- Input parameter multiline (MULLINE) is invalid. Value of MULLINE
is 2, but this is a single line entry.
- 0307
- Input parameter number of entries in the input array (INPENT)
is invalid. Number of entries specified in INPENT is not equal to
the number of entries actually in the LAI.
- 0308
- Data column descriptor (DCD) for corresponding data attribute
block (DAB) does not exist.
- 0309
- Input parameter area is invalid. Area name is not one of the following:
input, object, data, or command.
- 0310
- Input parameter offset is invalid. Offset is out of range.
- 0311
- Data attribute block pointer (DABLPTR) does not point to a valid
DABL.
- 0312
- FDBLEFT or FDBRITE in the format data block (FDB) is invalid.
Value is less than 0 or greater than the number of displayable data
columns.
- 0314
- Data column is too wide to be put in the data area.
- 0315
- Invalid input parameter ADDRFABOR DCDNO in module DGTFFOX1.
- 0316
- ISPF/PDF browse failed. Zero length data (empty sequential data
set or 0 length member of a partitioned data set). Return code: 12.
- 0317
- ISPF/PDF browse failed. Specified member not found. Return code:
14.
- 0318
- Input parameter column name list (COLLIST) is invalid. At least
one of the column names in the COLLIST was not found.
- 0319
- Column tag specified by the user is invalid.
- 0320
- Column tag specified is not displayed.
- 0321
- Entry identified by the ROWID is not displayed.
- 0322
- ISPF/PDF browse failed. No members were in library when the member
list was requested. Return code: 16.
- 0323
- Cursor is not placed in a field of the LIST panel.
- 0324
- Cursor is placed in one of the fields: fixed area (entry statement,
data column statement) or warning.
- 0325
- Cursor is placed in a gap between 2 data columns.
- 0326
- Cursor is placed in a field of the LIST panel, but it is not one
of the following: command line, entry statement, data column statement,
warning, column headings, tags, or LAI.
- 0327
- ISPF/PDF browse failed. Severe error, unable to continue. Return
code: 20.
- 0328
- ISPF/PDF edit failed. No members were in the library when member
list was requested. Return code: 16.
- 0329
- Value of FDBVSIZE (the vertical size of the list area of the current
display with factor of split screen considered) in module DGTFFOF1
is invalid.
- 0330
- Value in the extension variable from the variables of list area
(VLA) is invalid.
- 0331
- Value of MAXL (length of variables NAME1 and NAME2) in module
DGTFFOA2 is invalid.
- 0332
- Incorrect number in the entry statement of the fixed area.
- 0333
- TAGLEN value in module column DGTFFOI1 is invalid.
- 0334
- No left parenthesis in the tag text.
- 0335
- Length of the output variable is not equal to the length of the
data to be retrieved.
- 0336
- Value of COLSIZE in module DGTFFOY1 is invalid.
- 0337
- Length of the static load module text is invalid.
- 0338
- Input parameter area option (AREAOP) is invalid.
- 0339
- One of the control block lengths in the static load module is
incorrect.
- 0340
- Invalid return code.
- 0341
- Input parameter ADDRFAB is invalid.
- 0342
- Input parameter CRPLAI or CRPVAL is invalid.
- 0343
- FSAB exists without any FAB. Format services were not cleaned
up.
- 0344
- Character scroll amount in DGTFFOM1 is invalid. Amount is neither
PAGE nor MAX.
- 0345
- ISPF/PDF edit failed. Severe error, unable to continue. Return
code: 20.
- 0346
- CLIST line operator canceled by user with END command.
- 0347
- Object name (second column of list) is blank.
- 0348
- DELETE failed because the list was generated from VTOC.
- 0349
- Invalid column heading length. The column heading length obtained
from the message library is less than that stored in the static text,
or greater than the length of the data area in the list panel.
- 0350
- DFHSM line operator failed.
- 0351
- DFQFMACC failed to read MCVT, SVC error.
- 0352
- DFQFMACC failed to read MCVT, MWE error.
- 0353
- DFQFMACC failed to read BCDS (B Record), SVC error.
- 0354
- DFQFMACC failed to read BCDS (B Record), MWE error.
- 0355
- DFQFMACC failed to read BCDS (C Record), SVC error.
- 0356
- DFQFMACC failed to read BCDS (C Record), MWE error.
- 0357
- DFQFMACC failed to read MCDS, SVC error.
- 0358
- DFQFMACC failed to read MCDS, MWE error.
- 0359
- DFSMShsm command
entry/confirmation panel canceled.
- 0360
- Unsupported DFSMShsm level.
- 0361
- DFSMShsm not
installed.
- 0362
- DFSMShsm not
active.
- 0363
- The user is not a storage administrator.
- 0366
- TSO DELETE: Minor error encountered. Return code: 4.
- 0367
- TSO DELETE: Function completed, but specific details were bypassed.
Return code: 8.
- 0368
- TSO DELETE: Entire function could not be performed. Return code:
12.
- 0369
- TSO DELETE: Severe error. Return code: 16.
- 0370
- TSO DELETE: Severe error. Return code: 20.
- 0373
- Data set name is unreadable '?????????'. Unable to alter data
set.
- 0374
- ALTER line-op failed: severe error in DGTFAL04, or in DGTQAL01.
Unable to alter data set.
- 0375
- ALTER line-op failed: severe error in DGTFAL05. Unable to alter
data set.
- 0400
- Sort parameter is invalid.
- 0401
- Filter syntax is invalid. Only one set of filter criteria may
be specified.
- 0402
- Application filter-initialization module failed. Application did
not initialize appropriate filter control blocks.
- 0403
- FILTER command was canceled by the user with the END command.
No filtering took place.
- 0404
- No changes were detected in the filter criteria. List is already
filtered according to the specified filter criteria. No new filter
took place.
- 0405
- Filter flags not properly initialized. One of the following flags
must be on: ADDFLAG, DELFLAG, or MODFLAG.
- 0406
- Invalid filter type specified by the user, detected by the filter
module.
- 0407
- Invalid relational operator specified by the user and not detected
by the filter panel definition. EQ or NE should have been specified.
- 0408
- Invalid relational operator specified by the user. Valid relational
operators are: EQ, NE, GT, GE, LT, and LE.
- 0409
- Column tag must be enclosed in parentheses.
- 0410
- Panel name from the ERTB is invalid.
- 0411
- Column name specified in the DAB is not recognized.
- 0412
- Invalid relational operator. Only valid relational operators for
the specified column are EQ and NE.
- 0413
- Invalid relational operator. Only valid relational operator for
the specified column is EQ.
- 0420
- Invalid input parameter tags for module DGTFSO04.
- 0421
- Filter value is longer than the allowed maximum length.
- 0450
- Error occurred during DEVINFO invocation. Return code from DEVINFO
indicates that an error was encountered. Detailed information has
been placed in the problem determination area of the ISMF log.
- 0451
- Respective field's displacement is zero in the return area header
of DEVINFO.
- 0452
- Source for the generated list is invalid. Source of a generated
list should either be VTOC or CATALOG.
- 0453
- Invalid connector was entered by the user, but was not detected
by the panel check routine.
- 0454
- Invalid operator was entered by the user, but was not detected
by the panel check routine.
- 0455
- Screen logical number obtained from the profile pool is either
invalid (<0) or not in the defined range (1 to 8).
- 0456
- Requested column cannot be found in the data set application static
module.
- 0457
- Invalid scroll amount was entered by the user.
- 0470
- Conflict between CPPLPMAD and DGTEWORD. CPPLPMAD indicates that
there is a parameter, but the length of the parameter returned by
DGTEWORD is not greater than zero.
- 0471
- Invalid pointer (GDRBIACB) to the first ISMF application control
block (IACB).
- 0472
- An error exists in the chaining of IACBs.
- 0473
- A conflict exists in the IACB pointers.
- 0474
- The pointer (GDRBIACB) to the first IACB is 0.
- 0501
- TBVCLEAR: Severe table error. Return code: 20.
- 0502
- TBVCLEAR: Table not open. Return code: 12.
- 0504
- TBSARG: Severe table error. Return code: 20.
- 0505
- TBSARG: Table not open. Return code: 12.
- 0506
- TBSARG: All column variables are null, and the namelist parameter
was not specified. No argument established. Return code: 8.
- 0507
- TBSKIP: Severe table error. Return code: 20.
- 0508
- TBSARG: Table not open. Return code: 12.
- 0509
- TBSKIP: Variable value has been truncated, or insufficient space
was provided to return all extension variable names. Return code:
16.
- 0510
- TBSKIP:Current row pointer would have gone beyond the number of
rows in the table (this includes a table empty condition). ISPF current
row pointer is set to 0 (top). Return code: 8.
- 0512
- TBBOTTOM: Variable value has been truncated, or insufficient space
was provided to return all extension variable names. Return code:
16.
- 0513
- TBBOTTOM: Severe table error. Return code: 20.
- 0514
- TBBOTTOM: Table not open. Return code: 12.
- 0515
- TBBOTTOM: Table is empty, CRP set to top (0). Return code: 8.
- 0516
- TBBOTTOM: CRP set to top (0). Return code: 8.
- 0517
- TBTOP: Severe table error. Return code: 20.
- 0518
- TBTOP: Table not open. Return code: 12.
- 0519
- TBSORT: Severe table error. Return code: 20.
- 0520
- TBSORT: Table not open. Return code: 12.
- 0521
- TBSORT: Numeric convert error. Return code: 16.
- 0522
- TBPUT: Severe table error. Return code: 20.
- 0523
- TBPUT: Table not open. Return code: 12.
- 0524
- TBPUT: CRP was at top and remains at top. Return code: 8.
- 0525
- TBPUT: Numeric conversion error. Return code: 16.
- 0526
- Improper DAB variable type. It must be C, H, or B.
- 0527
- Call to DELETE was unsuccessful.
- 0528
- Array does not exist.
- 0529
- Invalid sort order: It must be A or D.
- 0530
- SELBFLG1 is not specified or is incorrectly specified. One bit
must be on.
- 0531
- Caller's DAB does not match with any VDEFINE DABs.
- 0532
- Scan for the nth row was unsuccessful. The last row found is returned.
- 0533
- Improper search direction. Direction default is to next.
- 0534
- DABL contains no DABs. Array cannot be created.
- 0535
- Get storage for ARVT/RWCB control block failed.
- 0536
- SRVTARB1 or SRVTARN1 (or both) in SRVT control block are not initialized.
- 0537
- Extension DAB name is not returned in the extension variable list
by ISPF.
- 0538
- DABCLEN is invalid.
- 0539
- Array already exists.
- 0540
- Invalid DAB justification flag.
- 0541
- Condition value for an extension DAB is invalid.
- 0542
- Return code is invalid.
- 0581
- Convert utility: Address of the control data attribute block is
0.
- 0582
- Data set name verification: invalid character. Valid characters
are: A-Z, 0-9, '#', '$', '@', '.', ')', '(', '*'. In addition, the
first character within a set of parentheses may be '+', '-', 0, alphabetic,
or national (@, $, #).
- 0583
- Data set name verification: Incomplete data set name specification.
Data set name must not end with a '.'.
- 0584
- Data set name verification: Data set name is quoted. Data set
name must not be quoted in this situation.
- 0586
- Data set name verification: Invalid member name. Member name must
start with a national (@, $, #) or alphabetic character; subsequent
characters may also be numeric. Member name must not exceed 8 characters
in length.
- 0587
- Data set name verification: Invalid member name. Member name must
not exceed 8 characters in length.
- 0588
- Data set name verification: Invalid data set name. Member of a
PDS must not be specified.
- 0589
- Data set name verification: Invalid generation data set specification.
GDG must be in the form (0), (+n), or (-n), where n is between 1 and
255.
- 0590
- Data set name verification: Invalid data set name. Fully specified
data set names are not allowed.
- 0591
- Data set name verification: Data set name is too long. Maximum
length, including '.', is 35 characters for a GDG data set name, and
44 characters for a fully specified data set name.
- 0592
- Data set name verification: Invalid data set name. GDG specification
is not allowed.
- 0593
- Data set name verification: Invalid partial specification. More
than 2 '*' in a single qualifier are not allowed.
- 0594
- Data set name verification: Invalid data set name. Partial specification
is not allowed.
- 0595
- Volser verification: Partial specification is not allowed. Partial
specification was not requested, but an '*' was found in the input
volume serial number.
- 0596
- Volser verification: Full specification is not allowed. Input
volser was fully specified, but full specification was not requested.
- 0597
- Log Utility: Request was made to log abend information, but the
pointer to the retry work area (RWA) is not valid.
- 0598
- Data set name verification: Qualifier was found that was longer
than the allowable maximum of 8 characters.
- 0599
- Data set name verification: Invalid qualifier specification. First
character of a qualifier must be alphabetic or national (#, @, $).
- 0600
- MVS load SVC was unsuccessful. Requested module could not be loaded.
- 0601
- No matching SCT entry was found.
- 0602
- Unable to build storage control (SCT) entry.
- 0603
- Reserved for CSR, DGTCGMO1. Return code: 8.
- 0604
- Unable to build load list block (LLBL) entry.
- 0605
- No matching LLBL entry found.
- 0606
- Load common service routine failed while trying to link to another
module with the ISMF link macro.
- 0607
- Tried to decrement when use count=0.
- 0608
- Convert utility: Truncated data. Target area specified was not
large enough to contain the converted data. Data was truncated.
- 0610
- Convert utility: Length of the source data must be from 1 to 4
bytes when converting fixed binary numbers.
- 0611
- Convert utility: Invalid source data length. Length of the data
to be converted must be greater than 0.
- 0612
- Convert utility: Target data length is invalid. Length of the
target data must be greater than 0.
- 0613
- Convert utility: Source data address=0. Address of the data to
be converted is 0.
- 0614
- Convert utility: Target address=0. Address specified for the target
address is 0.
- 0615
- Data set name (DSN) verification failed.
- 0616
- Starting address is larger than ending address. Input parameters
supplied to the word-parsing routine (DGTEWORD) are invalid.
- 0617
- Log: Message not found. Return code: 12.
- 0618
- Log: Severe error. Return code: 20.
- 0619
- Log: Invalid return code.
- 0620
- Request was made to log status information, but no additional
message IDs were specified. At least one message ID must be specified.
- 0621
- Convert utility: Invalid conversion code.
- 0622
- Convert utility: Invalid justification code.
- 0623
- Data set name verification: Unbalanced quotes were found in the
input data set name. Data set name may contain no quotes or two quotes
(one at each end of the data set name).
- 0624
- Invalid return code from ISPF VDELETE.
- 0625
- Invalid return code from ISPF VPUT.
- 0626
- Invalid return code from ISPF VGET.
- 0627
- Invalid return code from ISPF VDEFINE.
- 0628
- Invalid return code from ISPF SETMSG.
- 0629
- Invalid return code from ISPF GETMSG.
- 0630
- Invalid return code from ISPF DISPLAY.
- 0631
- ISPF DISPLAY: Terminated by END or RETURN. User requested termination
by using END or RETURN command. Return code: 8.
- 0632
- ISPF DISPLAY: Specified panel, message, or cursor field was not
found. Return code: 12.
- 0633
- ISPF DISPLAY: Truncation or translation error in storing defined
variables. Return code: 16.
- 0634
- ISPF DISPLAY: Severe error. Return code: 20.
- 0635
- ISPF GETMSG: Specified message was not found. Return code: 12.
- 0636
- ISPF GETMSG: Severe error. Return code: 20.
- 0637
- ISPF SETMSG: Specified message was not found. Return code: 12.
- 0638
- ISPF SETMSG: Severe error. Return code: 20.
- 0639
- ISPF VDEFINE: Variable was not found. Return code: 8.
- 0640
- ISPF VDEFINE: Data truncation occurred. Return code: 16.
- 0641
- ISPF VDEFINE: Severe error. Return code: 20.
- 0642
- ISPF VGET: Variable was not found. Return code: 8.
- 0643
- ISPF VGET: Truncation or translation error occurred during data
movement. Return code: 16.
- 0644
- ISPF VGET: Severe error. Return code: 20.
- 0645
- ISPF VPUT: Variable was not found. Return code: 8.
- 0646
- ISPF VPUT: Truncation occurred while copying variables to the
application profile pool. Return code: 16.
- 0647
- ISPF VPUT: Severe error. Return code: 20.
- 0648
- ISPF VDELETE: At least one variable was not found. Return code:
8.
- 0649
- ISPF VDELETE: Severe error. Return code: 20.
- 0650
- ISPF TBDELETE: For nonkeyed tables, the table was empty. ISPF
current row pointer remains at the top. For keyed tables, the row
specified by the key variables does not exist. ISPF current row pointer
is set to top. Return code: 8.
- 0651
- ISPF TBDELETE: Table is not open.
- 0652
- ISPF TBDELETE: Severe error.
- 0653
- ISPF TBDELETE: Return code is invalid.
- 0654
- ISPF TBEND: Table is not open.
- 0655
- ISPF TBEND: Severe error.
- 0656
- ISPF TBEND: Return code is invalid.
- 0657
- ISPF TBTOP: Table is not open.
- 0658
- ISPF TBTOP: Severe error.
- 0659
- ISPF TBTOP: Return code is invalid.
- 0660
- ISPF TBVCLEAR: Table is not open.
- 0661
- ISPF TBVCLEAR: Severe error.
- 0662
- ISPF TBVCLEAR: Return code is invalid.
- 0663
- ISPF TBADD: Row with the same key already exists. ISPF current
row pointer is set to the top (0). Return code: 8.
- 0664
- ISPF TBADD: Table is not open.
- 0665
- ISPF TBADD: Numeric convert error.
- 0666
- ISPF TBADD: Severe error.
- 0667
- ISPF TBADD: Return code is invalid.
- 0668
- ISPF TBPUT: For nonkeyed tables, the ISPF current-row pointer
was at the top and remains at the top. For keyed tables, the key does
not match that of the current row. ISPF current row pointer is set
to the top. Return code: 8.
- 0669
- ISPF TBPUT: Table is not open.
- 0670
- ISPF TBPUT: Numeric convert error.
- 0671
- ISPF TBPUT: Severe error.
- 0672
- ISPF TBPUT: Return code is invalid.
- 0673
- ISPF TBGET: For nonkeyed tables, the ISPF current-row pointer
was at the top and remains at the top. For keyed tables, the row specified
by the value in the key variables does not exist. The ISPF current
row pointer is set to the top.
- 0674
- ISPF TBGET: Table is not open.
- 0675
- ISPF TBGET: Insufficient space to return all extension variable
names.
- 0676
- ISPF TBGET: Severe error.
- 0677
- ISPF TBGET: Return code is invalid.
- 0678
- ISPF TBCREATE: Table already exists.
- 0679
- ISPF TBCREATE: Table in use, ENQ failed.
- 0680
- ISPF VCOPY: Variable not found. Return code: 8.
- 0681
- ISPF TBCREATE: Severe error.
- 0682
- ISPF TBCREATE: Return codes are invalid.
- 0683
- ISPF TBSORT: Table is not open.
- 0684
- ISPF TBSORT: Numeric convert error.
- 0685
- ISPF TBSORT: Severe error.
- 0686
- ISPF TBSORT: Return code is invalid.
- 0687
- ISPF TBBOTTOM: Table is empty.
- 0688
- ISPF TBBOTTOM: Table is not open.
- 0689
- ISPF TBBOTTOM: Insufficient space provided to return all extension
variables.
- 0690
- ISPF TBBOTTOM: Severe error.
- 0691
- ISPF TBBOTTOM: Return code is invalid.
- 0692
- ISPF TBSARG: All column variables are null, and the name-list
parameter was not specified.
- 0693
- ISPF TBSARG: Table is not open.
- 0694
- ISPF TBSARG: Severe error.
- 0695
- ISPF TBSARG: Return code is invalid.
- 0696
- ISPF TBSKIP: CRP would have gone beyond the number of rows in
the table.
- 0697
- ISPF TBSKIP: Table is not open.
- 0698
- ISPF TBSKIP: Insufficient space was provided to return all extension
variables.
- 0699
- ISPF TBSKIP: Severe error.
- 0700
- ISPF TBSKIP: Return code is invalid.
- 0701
- ISPF TBSCAN: Row does not exist. No match was found.
- 0702
- ISPF TBSCAN: Table is not open.
- 0703
- ISPF TBSCAN: Insufficient space was provided to return all extension
variables.
- 0704
- ISPF TBSCAN: Severe error.
- 0705
- ISPF TBSCAN: Return code is invalid.
- 0706
- TBADD: GETMAIN error. Return code: 20.
- 0707
- Caller is not authorized to invoke this module.
- 0708
- ISPF VCOPY: Truncation occurred. Return code: 16.
- 0709
- ISPF VCOPY: Severe error. Return code: 20.
- 0710
- FTCLOSE: Output file already exists. Return code: 4.
- 0711
- FTCLOSE: File is not open. Return code: 8.
- 0712
- FTCLOSE: Output file is in use. Return code: 12.
- 0713
- FTCLOSE: Output file is not allocated. Return code: 16.
- 0714
- FTCLOSE: Severe error. Return code: 20.
- 0715
- FTCLOSE: Return code from ISPF is invalid.
- 0716
- FTINCL: Skeleton does not exist. Return code: 8.
- 0717
- FTINCL: Skeleton or table in use. Return code: 12.
- 0718
- FTINCL data truncation occurred, or skeleton library or output
file esd not allocated. Return code: 16.
- 0719
- FTINCL: Severe error. Return code: 20.
- 0720
- FTINCL: Return code from ISPF is invalid.
- 0721
- FTOPEN: File tailoring already in progress. Return code: 8.
- 0722
- FTOPEN: Output file in use. Return code: 12.
- 0723
- FTOPEN: Skeleton library or output file was not allocated. Return
code: 16.
- 0724
- FTOPEN: Severe error. Return code: 20.
- 0725
- Return code from ISPF is invalid.
- 0726
- TBQUERY: Table is not open. Return code: 12.
- 0727
- TBQUERY: Insufficient space provided. Return code: 16.
- 0728
- TBQUERY: Severe error. Return code: 20.
- 0729
- TBQUERY: Unexpected return code.
- 0730
- ISPF VCOPY: Invalid return code.
- 0731
- PDF LMINIT: DATA-ID not created. The error condition is described
in the ISPF system dialog variables. Return code: 8.
- 0732
- PDF LMMLIST: Empty member list. Return code: 4.
- 0733
- PDF LMMLIST: LIST OPTION - End of member list. Return code: 8.
PDF LMMLIST: FREE OPTION - Member list does not exist.
- 0734
- PDF LMMLIST: No data set associated with the given DATA-ID. That
is, LMINIT has not been completed. Return code: 10.
- 0735
- PDF LMMLIST: One of the following: The data set is not open or
is not partitioned. The parameter value is invalid. Return code: 12.
- 0736
- PDF LMMLIST: Truncation or translation error in accessing dialog
variables. Return code: 16.
- 0737
- PDF LMMLIST: Severe error, unable to continue. Return code: 20.
- 0738
- PDF LMMLIST: Invalid return code.
- 0739
- Table service failed, list may be incomplete.
- 0740
- Index is not within bounds of the array.
- 0741
- TBSTATS: Variable value has been truncated.
- 0742
- TBSTATS: Severe error.
- 0743
- TBSTATS: Invalid return code.
- 0806
- Load module was not found.
- 1000
- Invalid (unexpected) return code was received from the called
function. This could be due to a logic error in the called function
or a mismatch between calling and called function. For example, the
called function might have added a new return code of which the caller
is not aware.
- 1001
- CDTXSTAT field of CDTX contains an unrecognizable value.
- 1002
- Visual ID of the control block is invalid. This could be caused
by an invalid address in the pointer to the control block or by incorrect
initialization of the visual ID of the control block.
- 1003
- Function requested by the caller is invalid.
- 1004
- Value of the DACDTOT field of DACD does not correspond to the
total number of DSN DABs.
- 1005
- While preparing to update the filter status field (DABFS), the
DSN DAB was not found.
- 1006
- DYNALLOC Error.
- 1007
- RDJFCB Error.
- 1008
- Open Error.
- 1009
- Duplicate column name in DAB.
- 1010
- Column name in DAB is invalid.
- 1011
- DACL is invalid.
- 1012
- Duplicate DACL.
- 1013
- Column name in DACL is invalid.
- 1014
- More than one DSN was specified for generic DSN.
- 1015
- Percent of ALLOC not used cannot be calculated because either
the allocated space or the allocation used is invalid.
- 1016
- GFL error: Nonzero return code.
- 1017
- GFL error: Catalog name entry.
- 1018
- GFL error: Data set name entry.
- 1019
- GFL error: The length was invalid.
- 1020
- Status of the data set name (FCLDSNST) returned by CVAFFILT in
FCL is invalid.
- 1021
- TRKCALC error.
- 1022
- DASDCALC error.
- 1023
- DEVINFO error.
- 1024
- CVAFFILT error.
- 1025
- DFSMShsm is
not installed or is inactive.
- 1026
- Volume serial number verification: An invalid character was found.
- 1027
- Volume serial number verification: Too many asterisks were found.
Only one asterisk may be specified in a partial specification.
- 1028
- Invalid operator was found in DACL during selection criteria processing.
- 1029
- Invalid logical connector was found in DACL during selection criteria
processing.
- 1030
- GFL error: No data is returned.
- 1031
- Nonzero return code from catalog management.
- 1032
- Unable to acquire needed data.
- 1033
- Needed data from SWAREQ not acquired.
- 1034
- Percentage of user data reduction cannot be calculated.
- 1047
- Error acquiring data needed to invoke DASDCALC.
- 1048
- Error acquiring keyrange qualifier.
- 1049
- Error acquiring volume flag.
- 1050
- Data set is not partitioned.
- 1051
- Data set does not have SAM/PAM DSORG.
- 1052
- Locate failed. See feedback for catalog reason code.
- 1053
- Unable to locate cluster name for VSAM component.
- 1054
- Data set name is GDG base name.
- 1055
- Data set name is VSAM data or index component name.
- 1056
- Data set's allocated used space is 0.
- 1057
- Data set is migrated.
- 1058
- Submit failed.
- 1059
- RESTORE LIST command invalidly entered on a selection panel.
- 1060
- RESTORE command parameter is neither list nor data set.
- 1061
- More than one RESTORE command parameter entered.
- 1062
- Output data set for background job is neither physical sequential
nor a member of a PDS.
- 1063
- Select failed. See feedback field for select return code.
- 1064
- Return code from DYNALLOC is 0, but the SVC99 information reason
code is not 0. See feedback for SVC99 request type, error reason code,
and information reason code.
- 1065
- Return code from DYNALLOC is 4. See feedback for SVC99 request
type, error reason code, and information reason code.
- 1066
- Return code from DYNALLOC is 8. See feedback for SVC99 request
type, error reason code, and information reason code.
- 1067
- Return code from DYNALLOC is 12. See feedback for SVC99 request
type, error reason code, and information reason code.
- 1069
- VSAM component name found in catalog.
- 1070
- System residence volume serial number (ETSYSRES) in environment
table is blank.
- 1071
- Return code from DEVINFO is 0 or 8. UCBTYP is not DASD.
- 1072
- Data set is a user catalog.
- 1073
- Unexpected allocation request type received during background
job submission. See feedback for unexpected allocation request type.
- 1074
- Invalid parameter entered on the command line.
- 1075
- Volser verification: is blank.
- 1076
- Volser verification: is a single asterisk.
- 1077
- No column name match found in static column load module. See feedback
for column name requested and static column load module name.
- 1078
- No column name match was found in the DAB chain.
- 1079
- Unexpected panel number was encountered. See feedback field for
unexpected panel number.
- 1080
- Unexpected panel variable name was encountered. See feedback field
for unexpected panel name.
- 1081
- Unexpected catalog entry type was received back from call to DGTEARFN.
- 1082
- Unexpected column name was encountered during verification of
data sets in the list. See feedback for unexpected column name.
- 1083
- Unexpected request type was received during array processing.
See feedback for the unexpected request type.
- 1084
- No data set names found in the array.
- 1085
- Unexpected file tailoring service was requested during background
job submission. See feedback for the unexpected tailoring service
name.
- 1086
- Unexpected request type was received during filter data set allocation
processing. See feedback for the unexpected request type.
- 1087
- Open error: See feedback for indication of whether data set was
input or output, return code from open, and data set name.
- 1088
- Duplicate data set name found in data set list.
- 1089
- Unexpected DCB address was found during background job submission.
See feedback for current DCB address and all 3 valid DCB addresses.
- 1090
- More than 255 input volume serial numbers.
- 1091
- Data set name is VSAM cluster name.
- 1092
- Unexpected option flag received during the process of validating
the data set name. See feedback field for the unexpected option field.
- 1093
- Unexpected GETMAIN request flag received. See feedback for the
unexpected request flag value.
- 1094
- Unexpected job disposition type received during background job
submission. See feedback for the unexpected job disposition type.
- 1095
- Close error: See feedback for indication of whether data set was
input or output, return code from close, and data set name.
- 1096
- Invalid request flag found during BUILD/DELETE of data set name
lists. See feedback for flag byte.
- 1097
- Volser is null or in error.
- 1098
- Output data set for a background job is not a PDS. (See feedback
for hexadecimal DSORG value and data set name.)
- 1099
- BLDL failed.
- 1101
- Invalid RESTORE parameter was entered on the data set selection
panel.
- 1102
- Invalid job submitted message from CLIST DGTQSU01 submit processing.
- 1103
- Device type is null or in error.
- 1104
- ISPF TBOPEN: Table does not exist.
- 1105
- ISPF TBOPEN: Enqueue failed, table in use.
- 1106
- ISPF TBOPEN: Table input library not allocated.
- 1107
- ISPF TBOPEN: Severe error.
- 1108
- ISPF TBOPEN: Invalid return code.
- 1109
- ISPF TBCLOSE: Table is not open. Return code: 12.
- 1110
- ISPF TBCLOSE: Table output library is not open. Return code: 16.
- 1111
- ISPF TBCLOSE: Severe error. Return code: 20.
- 1112
- ISPF TBCLOSE: Unexpected return code.
- 1113
- Last use mode is undefined for hide.
- 1114
- Unable to build DEVT table.
- 1115
- Nonzero return code from DGTCDT01.
- 1200
- Error acquiring volser.
- 1201
- Error acquiring use attribute.
- 1202
- Error acquiring device number.
- 1203
- Error acquiring device type.
- 1204
- Error acquiring cylinders per volume.
- 1205
- Error acquiring free extents.
- 1206
- Error acquiring free cylinders.
- 1207
- Error acquiring additional free tracks.
- 1208
- Error acquiring cylinders in largest free extent.
- 1209
- Error acquiring additional tracks in largest free extent.
- 1210
- Error acquiring format-0 DSCB count.
- 1211
- Volume capacity cannot be calculated because needed data was not
acquired.
- 1212
- Free space cannot be calculated because needed data was not acquired.
- 1213
- Percent free space cannot be calculated because needed data was
not acquired.
- 1214
- Percent free space cannot be calculated because needed data has
invalid value.
- 1215
- Allocated space cannot be calculated because needed data was not
acquired.
- 1216
- Largest extent cannot be calculated because needed data was not
acquired.
- 1217
- Cannot determine if DASD is shared because needed data was not
acquired.
- 1218
- LSPACE error.
- 1219
- LSPACE cannot be invoked because UCB address was not acquired.
- 1220
- Error acquiring tracks per cylinder.
- 1221
- VTOC size cannot be acquired because needed data cannot be acquired.
- 1222
- Not authorized to access locked catalog.
- 1223
- Catalog temporarily unavailable.
- 1224
- Unauthorized locked catalog was encountered during a search of
catalogs for data sets that meet the partially specified data set
name.
- 1225
- Catalog temporarily unavailable while searching catalogs for data
sets that meet the partially specified data set name.
- 1226
- Specified catalog does not exist.
- 1230
- Invalid criteria name specified in IACL. See feedback for invalid
name.
- 1231
- Device type verification: Invalid character found.
- 1232
- Device type verification: Device type is blank.
- 1233
- Device type verification: More than one asterisk was specified
in a partial specification.
- 1234
- Device type verification: Partial specification was not requested,
but an asterisk was found in the input device name.
- 1235
- Device type verification: Full specification was not requested,
but no asterisk was specified.
- 1236
- Device type verification: Device type is a single asterisk.
- 1237
- Device type verification: Device type is not a supported generic
name.
- 1238
- TBMOD: Keys did not match, new row added to table. Return code:
12.
- 1239
- TBMOD: Table is not open. Return code: 12.
- 1240
- TBMOD: Numeric conversion error. Return code: 12.
- 1241
- TBMOD: Severe error. Return code: 12.
- 1242
- TBMOD: Invalid return code. Return code: 12.
- 1243
- TBERASE: Table does not exist in the output library. Return code:
12.
- 1244
- TBERASE: Table in use, ENQ failed. Return code: 12.
- 1245
- TBERASE: Output library not allocated. Return code: 12.
- 1246
- TBERASE: Severe error. Return code: 12.
- 1247
- TBERASE: Invalid return code. Return code: 12.
- 1248
- VIEW: View failed. Return code: 12.
- 1250
- Save command error: Invalid list name. List name cannot begin
with 'ISR', 'ISP', or 'DGT' and it cannot be quoted.
- 1252
- ALTER error: Data set ALTER against a non-SMS-managed data set
is not allowed.
- 1253
- Data set is a VSAM alternate index.
- 1254
- ALTER error: Nonzero return code from SVC 26 ALTER. See feedback
for return code and reason code.
- 1255
- Data set has unexpected type of catalog entry.
- 1256
- SUBMIT error: Invalid job submitted message from CLIST DGTQSF01.
- 1257
- Caller requested an invalid execute statement panel.
- 1258
- Storage group name longer than the 8-byte maximum.
- 1259
- Error in CSI GETLIST.
- 1260
- Error in AOMSERV.
- 1261
- DEVINFO resume is not allowed.
- 1262
- Invalid input parameters.
- 1263
- SCRATCH error: No volumes containing any part of the data set
were mounted. The data set may be a VIO data set that was not allocated
during SCRATCH. Return code: 4.
- 1264
- SCRATCH error: Unusual condition was encountered on one or more
volumes. Return code: 8.
- 1265
- SCRATCH error: Invalid volume list. Return code: 12.
- 1268
- OBTAIN error: For return code 04, volume was not mounted; for
return code 08, DSCB was not found; for return code 12, I/O error;
for return code 16, invalid pointer.
- 1269
- Variable data set record format was specified; must be fixed format.
- 1270
- Repeat line operator used without previous line operator.
- 1271
- Error occurred during processing of user line operator or command.
- 1272
- VREPLACE: Truncation occurred during data movement.
- 1273
- VREPLACE: Severe error.
- 1274
- VREPLACE: Invalid return code.
- 1275
- Error occurred during creation of user command anchor block.
- 1276
- Invalid application ID for this service.
- 1277
- User command failed.
- 1278
- Failure occurred during processing of a list.
- 1279
- Error occurred during initialization of user command.
- 1280
- Invalid return code for user command initialization.
- 1281
- User command control variable could not be retrieved from shared
variable pool.
- 1282
- Error occurred in DSERVXIT.
- 1283
- Invalid area specified. Valid values are ALL, DATA, or BOTH.
- 1284
- Invalid value was specified for FROM. Valid values are LAI or
SLAI.
- 1285
- Format name in data set anchor block is invalid.
- 1286
- DSERVXIT cannot be invoked because UCB address was not acquired.
- 1287
- Could not position CRP to top of array.
- 1288
- AOMSERV returned nonzero return/reason code.
- 1289
- Invalid subroutine call to DGTFCBSB.
- 1290
- Could not position to top of array.
- 1291
- Error during LASB initialization.
- 1292
- PDF LMINIT: Invalid parameter value. Return code: 12.
- 1293
- PDF LMINIT: Truncation or translation error in accessing dialog
variables. Return code: 16.
- 1294
- PDF LMINIT: Severe error. Return code: 20.
- 1295
- PDF LMINIT: Invalid return code.
- 1296
- PDF LMOPEN: Data set could not be opened. Return code: 8.
- 1297
- PDF LMOPEN: No data set associated with the given data ID. Return
code: 10.
- 1298
- PDF LMOPEN: Invalid parameter value; data set is already open;
cannot open concatenated data sets for output; cannot open a data
set allocated SHR for output; cannot open a data set allocated MOD
for input. Return code: 12.
- 1299
- PDF LMOPEN: Truncation or translation error in accessing dialog
variables. Return code: 16.
- 1300
- PDF LMOPEN: Severe error. Unable to continue. Return code: 20.
- 1301
- PDF LMOPEN: Invalid return code.
- 1302
- PDF LMCLOSE: Data set is not open. Return code: 8.
- 1303
- PDF LMCLOSE: No ISPF library or data set is associated with the
given data ID. Return code: 10.
- 1304
- PDF LMCLOSE: Severe error. Unable to continue. Return code: 20.
- 1305
- PDF LMCLOSE: Invalid return code.
- 1306
- PDF LMFREE: Free data set failed. Return code: 8.
- 1307
- PDF LMFREE: No data set is associated with the given data ID.
Return code: 10.
- 1308
- PDF LMFREE: Severe error. Unable to continue. Return code: 20.
- 1309
- PDF LMFREE: Invalid return code.
- 1310
- PDF LMGET: No ISPF library or data set is associated with the
given data ID. Return code: 10.
- 1311
- PDF LMGET: Data set is not open or is not open for input; LMMFIND
not done for a partitioned data set; invalid parameter value. Return
code: 12.
- 1312
- PDF LMGET: Truncation or translation error in accessing dialog
variables. Return code: 16.
- 1313
- PDF LMGET: Severe error. Return code: 20.
- 1314
- PDF LMGET: Invalid return code.
- 1315
- Cannot process command against empty list.
- 1316
- Convert utility: Invalid packed decimal field found while doing
a date conversion.
- 1317
- Largest extent in the track-managed space cannot be calculated
because some needed data was not acquired.
- 1318
- Error acquiring cylinders in the largest free extent in the track-managed
space.
- 1319
- Error acquiring additional tracks in the largest free extent in
the track-managed space.
- 1320
- Error acquiring free cylinders in the track-managed space.
- 1321
- Error acquiring additional free tracks in the track-managed space.
- 1322
- Allocated space in the track-managed space cannot be calculated
because some needed data was not acquired.
- 1323
- Free space in the track-managed space cannot be calculated because
some needed data was not acquired.
- 1324
- Volume capacity in the track-managed space cannot be calculated
because some needed data was not acquired.
- 1325
- VTOCLIST line operator not allowed for migrated data set (DS in
the MIGRAT VOLSER).
- 1326
- SMS GETMAIN failed.
- 1327
- Storage group volumes copy - duplicate volume.
- 1328
- VTOCLIST line operator is not allowed for the data set.
- 3000
- ESTAE macro invocation failed with return code 4.
- 3001
- ESTAE macro invocation failed with return code 8.
- 3002
- ESTAE macro invocation failed with return code 12.
- 3003
- ESTAE macro invocation failed with return code 16.
- 3004
- ESTAE macro invocation failed with return code 20.
- 3005
- ESTAE macro invocation failed with return code 24.
- 3006
- ESTAE macro invocation failed with an unknown return code.
- 3007
- ISPLINK (CONTROL) service failed with return code 20.
- 3008
- An ABEND occurred. The retry routine completed.
- 3009
- ISPLINK (DISPLAY) provided return code 0; return code 8 was expected.
- 3010
- ISPLINK (DISPLAY) provided return code 12; return code 8 was expected.
- 3011
- ISPLINK (DISPLAY) provided return code 16; return code 8 was expected.
- 3012
- ISPLINK (DISPLAY) provided return code 20; return code 8 was expected.
- 3013
- The current panel was not found in the panel array.
- 3014
- The current panel matches the last panel in the panel array.
- 3015
- The current panel matches the first panel in the panel array.
- 3016
- One or more areas of ISMF storage was not freed.
- 3017
- FREEMAIN provided return code 04; not all virtual storage freed.
- 3018
- FREEMAIN provided return code 08; part of area being fixed is
still free.
- 3019
- FREEMAIN provided return code 12; page table is paged out.
- 3020
- Unknown return code from DGTCFM01.
- 3021
- Storage was freed successfully by DGTCFM01.
- 3022
- Unknown return code from FREEMAIN.
- 3023
- DGTCLGCS failed with return code 12.
- 3024
- DGTCLGCS failed with an unexpected return code.
- 3025
- One or more calls to ISPLINK (VDEFINE) failed.
- 3026
- One or more calls to ISPLINK (VDELETE) failed.
- 3027
- Unexpected return code from the volume verification routine.
- 3028
- Invalid data set name.
- 3032
- Termination did not complete.
- 3033
- Initialization failed.
- 3034
- Unexpected return code—logged by caller.
- 3035
- ESTAE was not successful, but processing continued.
- 3036
- VDEFINE failed.
- 3037
- Insufficient storage.
- 3038
- Load command processor modules failed.
- 3039
- Prolog failure in DGTFCTIN.
- 3040
- ISMF command table processor initialization failed.
- 3041
- VPUT failed.
- 3042
- VDELETE failed.
- 3043
- Prolog failure in DGTFCTTE.
- 3044
- Unable to release command processor control blocks.
- 3045
- ESTAE termination abended.
- 3049
- Application selection failed.
- 3051
- Prolog failure in DGTFCTSE.
- 3052
- Load ISMF command table failed.
- 3055
- DEFINE failed.
- 3056
- ALTER failed.
- 3057
- Invalid option was not detected by DGTFSASV.
- 3061
- PREPARE ALTER failed.
- 3062
- DISPLAY ALTER failed.
- 3063
- PREPARE DEFINE failed.
- 3064
- DISPLAY DEFINE failed.
- 3068
- VGET failed.
- 3070
- Prolog failure in DGTFCTCK.
- 3071
- Unable to process command.
- 3072
- Invalid command was not detected by DGTFCTCK.
- 3073
- Prolog failure in DGTFCTPR.
- 3074
- Command processor, DGTFCTPR, failed.
- 3075
- SCDS saved.
- 3076
- Control service failed with a nonzero return code.
- 3077
- No members in library; return code 16 from PDF EDIT.
- 3078
- Severe error from PDF EDIT; return code 20 from PDF EDIT.
- 3079
- Invalid return code from PDF EDIT.
- 3080
- Empty sequential data set or zero length member of a PDS; return
code 12 from PDF BROWSE.
- 3081
- Specified member not found; return code 14 from PDF BROWSE.
- 3082
- No members in library; return code 16 from PDF BROWSE.
- 3083
- Severe error encountered; return code 20 from PDF BROWSE.
- 3084
- Invalid return code from PDF BROWSE.
- 3085
- Nonzero return code from ISPF control function.
- 3086
- OPEN provided return code 4.
- 3087
- OPEN provided return code 8.
- 3088
- OPEN provided return code 12.
- 3089
- OPEN provided an unknown return code.
- 3090
- CLOSE provided return code 4.
- 3091
- CLOSE provided return code 8.
- 3092
- CLOSE provided return code 12.
- 3093
- CLOSE provided an unknown return code.
- 3094
- Member name specified, but no data set name specified.
- 3095
- Allocation unit specified, but no primary or secondary amount
specified.
- 3096
- Primary space specified, but no allocation unit specified.
- 3097
- Secondary space specified, but no allocation unit specified.
- 3098
- Invalid value for DSORG.
- 3099
- LRECL greater than 32760.
- 3100
- Invalid value for RECFM.
- 3101
- BLKSIZE greater than 32760.
- 3102
- SVC99—unavailable resource.
- 3103
- SVC99—data set not found.
- 3104
- SVC99—environmental error.
- 3105
- SVC99—system error.
- 3106
- SVC99—unknown error.
- 3107
- Invalid value for initial disposition.
- 3108
- Invalid value for exit disposition.
- 3109
- Both DDNAME and DSNAME specified.
- 3110
- DGTCLD01 provided return code 12.
- 3111
- DGTCLD01 provided an unknown return code.
- 3112
- DGTCGM01 provided return code 12.
- 3113
- DGTCGM01 provided an unknown return code.
- 3114
- DGTCDT01 provided return code 12.
- 3115
- DGTCDT01 provided an unknown return code.
- 3116
- Module could not be loaded successfully.
- 3117
- Error—SMS configuration services.
- 3118
- CDS put base failed.
- 3119
- CDS unaccess failed.
- 3120
- Specified SCDS does not contain a system name. Optical libraries
require at least 1 system name in the SCDS.
- 3126
- Specified SCDS does not contain a system name. Object and object
backup storage group require at least 1 system name.
- 3127
- Invalid option not detected by DGTFFLSV.
- 3130
- Edit failed.
- 3131
- Translate failed.
- 3135
- ISPLINK (DISPLAY) provided an unknown return code; return code
8 was expected.
- 3136
- ISPLINK (CONTROL) failed with an unknown return code.
- 3138
- Translator prepare input failed.
- 3140
- Translator failed.
- 3142
- Prolog failure in DGTCIOAL.
- 3143
- Unable to allocate.
- 3146
- Prolog failure in DGTECFPT.
- 3148
- Browse failed.
- 3149
- Browse termination failed.
- 3154
- Count parameter out of range.
- 3172
- SMS construct saved.
- 3173
- Put element failed.
- 3174
- SVC99 error.
- 3175
- DGTCFM01 provided return code 12.
- 3183
- Invalid option was not detected by panel verification.
- 3184
- Volume was defined to another storage group.
- 3189
- Invalid type was not detected by panel verification.
- 3218
- Unable to convert to displayable form.
- 3219
- Unable to convert to internal form.
- 3220
- Display SG volume selection panel failed.
- 3221
- SG volume selection dialog failed.
- 3222
- CDS 8-Name mode conflicts with system 32-Name mode.
- 3229
- Prepare DGTDCSG5 failed.
- 3230
- Display DGTDCSG5 failed.
- 3231
- Prepare DGTDCSG4 failed.
- 3232
- Display DGTDCSG4 failed.
- 3233
- SMS has identified an error condition.
- 3234
- Data set was not found.
- 3235
- Caller is not authorized to access the data set.
- 3236
- READ access was requested, and data set is empty.
- 3237
- Element was not found.
- 3238
- No matching elements were found.
- 3239
- ACS routine was not translated because of user errors; listing
contains error messages.
- 3240
- The CDS failed SMS full validation.
- 3241
- CDS 32-Name mode conflicts with system 8-Name mode.
- 3242
- Volume serial number delete failed.
- 3243
- Add volume serial number failed.
- 3244
- No DDNAME specified in the free data set control block (FRCB).
- 3245
- Invalid units of allocation.
- 3246
- Function name was not found in function table.
- 3247
- Specified panel could not be found; return code 12 from ISREDIT.
- 3248
- Truncation error while storing ZCMD or ZSEL; ISREDIT—return code
16.
- 3249
- Severe error from ISREDIT—return code 20.
- 3250
- Unexpected error return code from ISREDIT.
- 3251
- Unexpected return code from DGTFIOS1.
- 3252
- Release command processor modules failed.
- 3253
- DGTFIOF2 detected a nonzero return code.
- 3254
- Prolog failure.
- 3255
- No IACB to release.
- 3256
- Nonzero return code from DGTCLD01.
- 3257
- SMS indicated that a resource is not available.
- 3258
- DGTEGMEM provided a nonzero return code.
- 3259
- Error—ACS translator.
- 3260
- Error—ACS executor.
- 3261
- The data set was previously updated.
- 3262
- DGTEFMEM provided a nonzero return code.
- 3263
- DGTELDMD (LOAD) error.
- 3264
- DGTEDTMD (DELETE) error.
- 3265
- Element already exists.
- 3266
- DGTEFMEM error and DGTEDTMD error.
- 3267
- Invalid value of APPFMODE from the ISMF profile variable table
variables (DGTMPVTV).
- 3268
- CDS is not formatted.
- 3269
- Invalid access mode parameter for CSI.
- 3270
- Invalid function code parameter for CSI.
- 3271
- A CDS is accessed with the access token.
- 3272
- No CDS is accessed with the access token.
- 3273
- ABEND logging failed with an unexpected return code.
- 3274
- The data set is not an SCDS.
- 3275
- Invalid element type.
- 3276
- Blank SMS construct name.
- 3277
- Retrieve information from VLA failed.
- 3278
- The data set is not a CDS.
- 3279
- Cannot delete the CDS base.
- 3280
- List services is unable to find a match on the DAB column name.
- 3281
- List services is unable to add a row of data to the array.
- 3282
- List services is unable to release the ISMF reserved storage.
- 3283
- Array services modules could not be loaded.
- 3284
- Format services modules could not be loaded.
- 3285
- Duplicate APID found.
- 3286
- DGTEGMEM (GET STORAGE) error.
- 3287
- DGTEFMEM (FREE STORAGE) error.
- 3288
- Initialize format services failed.
- 3289
- Move display window failed.
- 3290
- Initialize line operator executor failed.
- 3291
- Unable to release line operator executor control block.
- 3292
- Creation of the list area image (LAI) failed.
- 3293
- A status check of the array failed.
- 3294
- A sort of the array failed.
- 3295
- Obtaining of the cursor position failed.
- 3296
- Positioning of the cursor failed.
- 3297
- Updating of the fixed area failed.
- 3298
- Highlighting of the error entry failed.
- 3299
- Display of a panel failed.
- 3300
- Unable to process input.
- 3301
- Line operator and list command conflict.
- 3302
- DGTCCFAC (CSI ACCESS CDS) provided return code 12.
- 3303
- DGTCCFGT (CSI GET ELEMENT) provided return code 12.
- 3304
- Terminating error from DGTFDA00 (data acquisition).
- 3305
- Invalid SG type detected by convert.
- 3306
- No matching elements found.
- 3307
- Names too long—elements deleted.
- 3308
- Common filter service error.
- 3309
- List tailoring, DGTFCFLI, failed.
- 3310
- Validation indicated errors.
- 3311
- Not authorized to activate.
- 3312
- SSI did not schedule an activation.
- 3313
- Data set is in use.
- 3314
- Validation failed.
- 3315
- List services anchor block does not exist.
- 3316
- SMS is not operational.
- 3317
- Screen logical number is not within the bounds of the array.
- 3318
- SMS is not active; there is no active configuration.
- 3319
- Translation of column tags into column names failed.
- 3320
- Maximum number of valid commands allowed on panel (20) exceeded.
- 3321
- Invalid value was encountered during conversion of data from displayable
format to internal format.
- 3322
- Either GDRBLSAB or GDRBLSVT is invalid, or both are invalid.
- 3323
- Nonzero return code from security program.
- 3324
- Unable to branch to security bridge program.
- 3325
- Unknown return DSORG from SVC99.
- 3326
- OPEN of test library failed.
- 3327
- CLOSE of test library failed.
- 3328
- READ of test library failed.
- 3329
- Unrecognizable string in test library member.
- 3330
- Data set is not a partitioned data set—listing writer.
- 3331
- No member was specified for a partitioned data set—listing writer.
- 3332
- OPEN failed—listing writer.
- 3333
- BLDL failed—listing writer.
- 3334
- OBTAIN failed—listing writer.
- 3335
- RDJFCB failed—listing writer.
- 3336
- Type of data set is invalid—listing writer.
- 3337
- SYNAD error on GET—listing writer.
- 3338
- SYNAD error on PUT—listing writer.
- 3339
- Invalid function specified—listing writer.
- 3440
- OAM error—return code and reason code from OAM will be placed
in feedback area.
- 3341
- Invalid DCB pointer—listing writer.
- 3342
- Invalid pointer to data—listing writer.
- 3343
- Invalid title specified—listing writer.
- 3344
- Load of DGTFIORT failed—listing writer.
- 3345
- Invalid DD specified—listing writer.
- 3346
- Duplicate system name.
- 3347
- System name list is full.
- 3348
- System name was not found.
- 3349
- CSI termination failed.
- 3350
- Write of test library failed.
- 3351
- ACS routine type is unknown.
- 3352
- Invalid function specified—listing writer.
- 3353
- SYNAD detected an I/O error—listing writer.
- 3354
- LRECL for listing data set is invalid.
- 3355
- Invalid use of member name with a sequential data set.
- 3356
- No member specified for a partitioned data set.
- 3357
- Nonexistent member specified for a partitioned data set.
- 3358
- FIND macro failed; see feedback area for reason code from FIND
macro.
- 3359
- VIO storage group types are not volume associated.
- 3360
- Listing writer failed.
- 3361
- Cannot change active configuration.
- 3362
- Caller is not authorized to invoke this function.
- 3363
- LISTSYS valid only on pool storage group type and active CDS.
- 3364
- ACS test library cannot have an LRECL of less than 60.
- 3365
- Not authorized to open the listing data set for output.
- 3366
- Unable to process the line operator.
- 3367
- The data set record organization is not a linear data set.
- 3368
- Out of space for the data set.
- 3369
- Invalid subroutine call to DGTFLCSB/DGTFRCSB/DGTFLMSB.
- 3370
- Invalid storage group type.
- 3371
- Element is not connected to current system.
- 3372
- SCDS access is outstanding.
- 3373
- SCDS access is not outstanding.
- 3374
- CAF error.
- 3375
- SQL error.
- 3376
- DB2® row was not found.
- 3377
- DB2 row already exists.
- 3378
- DB2 setup error.
- 3379
- System index value is missing.
- 3380
- Attempt to save before system status defined.
- 3381
- OAM is active.
- 3382
- CTC/port combination already exists.
- 3383
- CTC/SCSI combination already exists.
- 3384
- OAM optical configuration database initialization failed.
- 3385
- OAM optical configuration database volume table setup failed.
- 3386
- OAM optical configuration database volume row retrieval failed.
- 3387
- OAM optical configuration database volume table termination failed.
- 3388
- OAM optical configuration database termination failed.
- 3389
- No matching volume table rows were found.
- 3390
- OAM data acquisition invalid function.
- 3391
- No storage available for volume table data.
- 3392
- Invalid volume type.
- 3393
- OSMC is not active.
- 3394
- CBRHLOPP call error.
- 3395
- Invalid volume location.
- 3396
- OAM is not active.
- 3397
- OAM eject error.
- 3398
- 256 drives already defined.
- 3399
- A pseudo library already exists.
- 3400
- Duplicate drive number.
- 3401
- VOLLIST parameter error.
- 3402
- Volume serial number is not found.
- 3403
- Volume is shelf resident.
- 3404
- Unexpected reason code from OAM.
- 3405
- OAM tape configuration database initialization failed.
- 3406
- OAM tape configuration database volume retrieval setup failed.
- 3407
- OAM tape configuration database volume row retrieval failed.
- 3408
- OAM tape configuration database volume retrieval termination failed.
- 3409
- OAM tape configuration database termination failed.
- 3410
- No matching tape volume records found.
- 3411
- ATL data acquisition invalid function.
- 3412
- No storage available for tape volume record data.
- 3413
- Invalid EJECT parameter.
- 3414
- Caller is not authorized to access the catalog that contains the
TCDB.
- 3415
- Catalog access error.
- 3416
- Catalog entry was not found.
- 3417
- Catalog entry already exists.
- 3418
- Catalog setup error.
- 3419
- OAM1 subsystem was not started.
- 3420
- AUDIT error.
- 3421
- DEFRAG error.
- 3422
- Catastrophic error propagated to end of volume list.
- 3423
- Unexpected return code/reason code from DGTFDAGE.
- 3424
- List control blocks might have been damaged - exit to POM.
- 3425
- Not enough output array entries for DGTSCFST.
- 3426
- OAM function CBRSCMDA returned an invalid drive address.
- 3427
- Not authorized to write to the data set. Volume is READ only.
- 3428
- Uplevel CDS conversion aborted.
- 3429
- Storage group wasn't found in the "To" SCDS.
- 6000
- Unsupported DFSMS/dfp version number was found.
- 6001
- Unable to locate associations or volume serial numbers for VSAM
cluster.
|