The following command syntax displays OAM drive detail status:
>>-+-DISPLAY-+-------------------------------------------------->
'-D-------'
>--SMS,-+-DRIVE-+-(-+-drvname-+-)-,DETAIL-+----------------+---><
'-DRI---' +-libname-+ '-,L=-+-a------+-'
'-ALL-----' +-name---+
'-name-a-'
- DRIVE(drvname | libname | ALL)
- Displays the details of the current status for optical drives.
If a drive name is specified, one data line describes the specified
optical drive. If a library name is specified, a data line describes
each optical drive associated with the library specified. If ALL is
specified, all the optical drives in the SMS configuration are displayed.
To specify a drive named ALL, surround it with parentheses, for example,
DISPLAY SMS,DRIVE((ALL)).
- DETAIL
- Displays detail status for optical drives.
- L={a | name | name-a}
- Specifies the location where the results of the inquiry are
to be displayed, where name is the console name, and a is
the display area on the console screen.
To display detail status for an individual drive, enter the following
command:
DISPLAY SMS,DRIVE(drvname),DETAIL
This
results in F OAM,D,DRIVE,drivename command being issued.
The following information is displayed:
CBR1120I OAM drive status:
DRIVE DEVICE TY LIBRARY ON OP AV WP DEV SC DRV MOUNT PEND
NAME TYPE NAME NUM SI NUM VOLUME VOLUME
drvname devtype a libname b c d e ffff g hhh mntvol pndvol
--------------------------------------------------------------
XCF MEMBER NAME: membername
-------------------------------------------------------------
The fields displayed in each data line are as follows:
- drvname
- Name of the optical drive
- devtype
- Device type of the optical drive:
- 3995-111
- 3995 rewritable optical disk drive
- 3995-112
- 3995 write-once optical disk drive
- 3995-113
- 3995 multifunction optical disk drive
- 3995-131
- 3995 rewritable optical disk drive
- 3995-132
- 3995 write-once optical disk drive
- 3995-133
- 3995 multifunction optical disk drive
- 3995-SW3
- 3995 multifunction optical disk drive
- 3995-SW4
- 3995 multifunction optical disk drive
- a
- Optical drive type:
- L
- Library
- S
- Operator-accessible (stand-alone)
- libname
- Name of the library to which the optical drive is attached.
For an operator-accessible optical drive, this field displays the
name of the pseudo optical library that this drive is associated within
its SCDS definition, or one of the following defaults:
- PCTWORM (for 3995-132 write-once drives)
- PCTREUSE (for 3995-131 rewritable drives )
- P3995133 (for 3995-133 multifunction drives)
- P3995SW3 (for 3995-SW3 drives)
- P3995SW4 (for 3995-SW4 drives)
- b
- Optical drive online status:
- Y
- Online
- N
- Offline
- P
- Pending offline
- c
- Optical drive operational status:
- Y
- Operational
- N
- Not operational
- d
- Optical drive availability status:
- Y
- Available. The optical drive is online, operational, not pending
offline, and not busy.
- N
- Not available.
- e
- Write Protection status:
- Y
- Write protection is on. Writing to this drive is not allowed.
- N
- Write protection is off. Writing to this drive is allowed.
The
write protection status reflects the switch setting as of the last
volume mount, vary online, or drive error processing.
- ffff
- z/OS device number of the CTC that is used to communicate
with the optical drive.
- g
- SCSI bus address of the optical drive on the SCSI interface.
Not used for 3995 and will be blank.
- hhh
- Drive number of the optical disk drive.
- mntvol
- Volume serial number of the volume that is mounted on the optical
drive. If there is no mounted volume, this field is blank.
- pndvol
- Volume serial number of the volume for which a mount is pending
on the optical drive. If there is no pending mount, this field is
blank. This field is blank when used for library-resident 3995 optical
drives.
- membername
- The XCF member name associated with the instance of OAM where
this drive is online. If the drive is not online to any OAM system
in the OAMplex, this field contains blanks. If this OAM system is
not part of the OAMplex, this field contains N/A.
The following is a sample of DISPLAY SMS,DRIVE(LID1),DETAIL:
CBR1120I OAM drive status:
DRIVE DEVICE TY LIBRARY ON OP AV WP DEV SC DRV MOUNT PEND
NAME TYPE NAME NUM SI NUM VOLUME VOLUME
L1D1 3995-133 L LIB1 Y Y N N 0922 1 OP001
----------------------------------------------------
XCF MEMBER NAME: OAMXCFMEMBER1
----------------------------------------------------
To display detail status for drives associated with a specific
optical library, enter the following command:
DISPLAY SMS,DRIVE(libname),DETAIL
This results in F OAM,D,DRIVE,libname
command being issued.
The following is a sample of DISPLAY SMS,DRIVE(LIB1),DETAIL:
CBR1120I OAM drive status:
DRIVE DEVICE TY LIBRARY ON OP AV WP DEV SC DRV MOUNT PEND
NAME TYPE NAME NUM SI NUM VOLUME VOLUME
L1D1 3995-133 L LIB1 Y Y N N 0922 1 OP001
L1D2 3995-133 L LIB1 Y Y N N 0923 2 OP002
L1D3 3995-133 L LIB1 Y Y Y N 0924 3 OP003
L1D4 3995-133 L LIB1 Y Y Y N 0925 4 OP004
To display detail status for all the optical disk drives active
in the SMS configuration, enter the following command:
DISPLAY SMS,DRIVE(ALL),DETAIL
This results
in F OAM,D,DRIVE command being issued.
The following is a sample of DISPLAY SMS,DRIVE(ALL),DETAIL:
CBR1120I OAM drive status:
DRIVE DEVICE TY LIBRARY ON OP AV WP DEV SC DRV MOUNT PEND
NAME TYPE NAME NUM SI VOLUME VOLUME
L1D1 3995-133 L LIB1 N N N N 0992 1
L1D2 3995-133 L LIB1 Y Y N N 0993 2 OP002
L1D3 3995-133 L LIB1 Y Y Y N 0994 3 OP003
L1D4 3995-133 L LIB1 Y Y Y N 0995 4 OP004
L1D5 3995-133 S PSEUDO1 N N N N 0996 5
L2AD1 3995-SW3 L LIB2 Y Y Y N 19F6 1 OP012
L2AD2 3995-SW3 L LIB2 N Y N N 19F7 2
L2AD3 3995-SW3 L LIB2 N Y N N 19F8 3
L2AD4 3995-SW3 L LIB2 N Y N N 19F9 4
L2AD5 3995-SW3 L LIB2 N Y N N 19FA 5
L2AD6 3995-SW3 L LIB2 N Y N N 19FB 6
L3D1 3995-SW3 S P3995SW3 N Y N N 19F2 1
L3D1 3995-113 L LIB2 N Y N N 092A 1 OP006
L3D2 3995-113 L LIB2 N Y N N 092B 2 OP007
L3D3 3995-113 L LIB2 Y Y Y N 092C 3 OP008
L3D4 3995-113 L LIB2 Y Y Y N 092D 4 OP009