|
Follow these steps to bring up the Mountable Optical Volume Selection
Entry panel.
- Select option 2, VOLUME, from the ISMF Primary Option menu. ISMF
displays the Volume List Selection menu.
_______________________________________________________
- Select option 2, MOUNTABLE OPTICAL, to generate a list of mountable
optical volumes. ISMF displays the Mountable Optical Volume Selection
Entry panel, shown in Figure 1.
_______________________________________________________
Figure 1. Mountable Optical Volume Selection Entry Panel Panel Utilities Help
------------------------------------------------------------------------------
MOUNTABLE OPTICAL VOLUME SELECTION ENTRY PANEL
Command ===>
Select Source to Generate Volume List . . 2 (1 - Saved list, 2 - New list)
1 Generate from a Saved List
List Name . .
2 Generate a New List from Criteria Below
Volume Serial Number . . . * (fully or partially specified)
Library Name . . . . . . . * (fully or partially specified)
Storage Group Name . . . . * (fully or partially specified)
Optical Media Type . . . . ALL (See help for valid value)
Enter "/" to select option _ Respecify View Criteria
_ Respecify Sort Criteria
Use ENTER to Perform Selection;
Use HELP Command for Help; Use END Command to Exit.
This section describes only the fields used to generate a new list
(option 2).
- GENERATE A NEW LIST FROM CRITERIA BELOW
- Complete the following fields if you selected option 2 (default)
for SELECT SOURCE TO GENERATE VOLUME LIST:
- VOLUME SERIAL NUMBER
- Enter a full or partial serial number of the volume or volumes
to include in the list. The default value is an asterisk.
To include
a single volume, enter a fully qualified volume serial number of 1
to 6 characters:
VOLUME SERIAL NUMBER ===> SYS001
For
a partially qualified volume serial number, use asterisks as global
volume serial number characters or percent signs as place holders.
For example, to include a range of volumes, enter a partially qualified
volume serial number by using one or two asterisks as global volume
serial number characters:
VOLUME SERIAL NUMBER ===> SYS*
Two
asterisks are the maximum number of volume serial number characters
allowed.
Use a single asterisk to specify all volumes that fit
your other selection criteria:
VOLUME SERIAL NUMBER ===> *
This
field is primed with the last value used. The default is *
- LIBRARY NAME
- Enter the 1 to 8 character name of an optical library, or a
partially qualified name. This field is primed with the last value
used. The default value is an asterisk.
- STORAGE GROUP NAME
- Enter the 1 to 8 character name of an SMS Object or Object Backup
storage group, in the same way as you would for a volume serial number.
This field is primed with the last value used. The default value is
an asterisk.
- OPTICAL MEDIA TYPE
- Enter the 3 to 8 character name of the optical media type on
which the volume resides. ALL is the default value. This
field is primed with the last value used. Use the following values
for optical media types:
- 3995WORM
- 3995 single-, double-, quad-, and 8x-density,
WORM, optical disk volumes
- 3995REWR
- 3995 single-, double-, quad-, and 8x-density,
rewritable, optical disk volumes
- 3995-1
- 3995 single-density, WORM and rewritable, optical disk volumes
- 3995-1WO
- 3995 single-density, WORM, optical disk volumes
- 3995-1RW
- 3995 single-density, rewritable, optical disk volumes
- 3995-2
- 3995 double-density, WORM and rewritable, optical disk volumes
- 3995-2WO
- 3995 double-density, WORM, optical disk volumes
- 3995-2RW
- 3995 double-density, rewritable, optical disk volumes
- 3995-4
- All 3995 quad-density, rewritable or WORM, optical disk volumes
- 3995-4RW
- All 3995 quad-density, rewritable, optical disk volumes
- 3995-4WO
- All 3995 quad-density, WORM, optical disk volumes
- 3995-8
- All 8x-density, rewritable or WORM,
optical disk volumes
- 3995-8RW
- All 3995 8x-density, rewritable, optical
disk volumes
- 3995-8WO
- All 8x-density, WORM, optical disk volumes
- ALL
- Select all available optical media types.
|