Messages and codes These topics contain information about the messages and codes that Tools Customizer and Accelerator Loader issue. Tools Customizer messagesUse the information in these messages to help you diagnose and solve Tools Customizer problems.Accelerator Loader messagesLook up Accelerator Loader messages to obtain information about them, including message explanations and suggested responses.HLO002EInsufficient region size. Available region size of at least 30000 is required.HLO003ENot enough memory. Close other applications and try again or contact your system administrator to increase the region size.HLO004EInsufficient region size. Available region size of at least 50000 is required for Accelerator Loader server administration.HLO010ENo objects match the filter.HLO011IOperation completed successfully. HLO101EISPF error: <error_message>.HLO102EAn invalid command was entered in the command or option line.HLO103E Enter a valid line command as listed at the top of the panel.HLO104EAn invalid option was entered. Enter a valid option.HLO105EAn invalid value was entered.HLO106IMove is pending. HLO107EElement was not found.HLO108INo element was selected from the list.HLO120EFile was not opened. <error_message_text>.HLO121EFile <file_name> is not a valid KSDS file.HLO122EI/O operation cannot be performed on closed file (<file_name>). HLO123EInput operation cannot be performed on file (<file_name>) because the file was opened in read only mode. HLO124ERecord to be added to file <file_name> already exists. HLO125ECannot add record to file. <error_message_text>. HLO126ERecord for update in file <file_name> does not exist. HLO127ECannot update record in file. <error_message_text>. HLO128ERecord for replace in file <file_name> does not exist. HLO129ECannot replace record in file. <error_message_text>. HLO130ERecord for delete from file <file_name> does not exist. HLO131ECannot delete record from file. <error_message_text>. HLO132ECannot locate record in file. <error_message_text>. HLO133ECannot read record from file. <error_message_text>. HLO200E<message_text>.HLO201EAccelerator Loader repository does not exist. HLO202EAccelerator Loader control file does not exist. HLO203EDb2® version <version> is not supported by this version of the product.HLO204EData changes cannot be saved because the profile was opened in View mode or Share option prevents saving.HLO206EAccess method for specified data set is not supported.HLO207INo Db2® subsystem was defined in the Db2® control file.HLO208EAn error occurred while saving JCL file: <file_name>. Error codes: <error_codes>.HLO209E Profile repository error: <error_text>. HLO210E <profile creator> element value is too long: element_value. It cannot exceed 8 characters.HLO211E<profile ssid> element must be set in the SYSIN DD. HLO212E<profile name> element must be set in the SYSIN DD. HLO213E<profile creator> element must be set in the SYSIN DD. HLO214E The output data set for Accelerator Loader load JCL generation must be a partitioned data set (PDS). The specified data set <data_set_name> does not exist and the member is empty in profile <profile_name>. HLO215E The output data set for Accelerator Loader profile_type load generation must be a partitioned data set (PDS). The specified data set data_set_name is not a PDS. HLO216E<table name> subelement must be set in the <table> element in the SYSIN DD. HLO217E <table creator> subelement must be set in the <table> element in the SYSIN DD. HLO218E Output data set data_set_name does not exist. An error occurred while the product was attempting to allocate the data set. HLO219WAn error occurred while the product was setting ISPF statistics for member member_name of data set data_set_name. HLO220I JCL file file_name for profile_name, profile_type, and ssid was successfully generated to data_set_name data set. HLO221E The value that was specified for the <number of jobs> element is too small. Cannot create jobs job_names for specified tables table_names. HLO222E The value that was specified for <number of jobs> element is too large: specified_value. Valid values are 1 - 17576. HLO223E Unknown subelement element_name found in the <table> element for profile type profile_type. HLO224E Unknown element element_name found for profile profile_type. HLO225E Unknown profile type found: <profile_type>. Valid values are: DUAL, CONSISTENT, ACCELERATOR ONLY, IMAGE COPY.HLO226ENo tables are defined for profile profile_name. HLO227EThe <profile type> element was not found.HLO228EThe profile version <version_number> is not supported by this version of the product.HLO229EThe profile was created by an earlier version of the product. Use the ISPF interface to convert the profile to the latest version.HLO240E The <template_name> template name must be defined for table <table_name>. HLO241E The <data_set_name> template data set must be defined for table <table_name>. HLO242E The <template_name> template disposition must be defined for table <table_creator.table_name>.HLO243EThe SYSREC data set must be defined for table <table_name>.HLO244E The accelerator name must be defined for profile <profile_name>. HLO249ESYSIN parsing error - invalid escape sequence: <escape_sequence>. HLO250E SYSIN parsing error - unexpected close tag symbol. HLO251E SYSIN parsing error - value for tag is incorrectly placed. HLO252E SYSIN parsing error - unexpected end of SYSIN. HLO253E<PARTITION> element must have a numeric value or numeric range with symbols '-,:'. The specified value is partition_value. HLO254ISYSREC data set supplied by profile profile_creator.profile_name for table table_creator.table_name. To override this value, use element <SYSREC-DSN>.HLO255ISYSREC template DSN supplied by profile profile_creator.profile_name for table table_creator.table_name. To override this value, use element <SYSREC-TEMPLATE-DSN>.HLO256ISYSREC template name supplied by profile profile_creator.profile_name for table table_creator.table_name. To override this value, use element <SYSREC-TEMPLATE-NAME>.HLO257IColumn info data set supplied by profile <creator>.<name> for table <table_creator>.<table_name>. To override this value, use element <FIELDSPEC-DSN>.HLO258EProfile <creator>.<name> created by <user-id> has NO ACCESS share option and cannot be built by <user-id>.HLO260EDb2® table <table_creator.table_name> was not found in catalog.HLO261EDb2® object <object_creator.object_name> of type <object_type> is not supported.HLO262EDb2® object <object_creator.object_name> of type <object_type> has more than one base table.HLO263EDb2® object <object_creator.object_name> of type <object_type> has base table not of type T.HLO300EDb2® subsystem ID is required. Enter a valid Db2® SSID.HLO301EDb2® subsystem ID is invalid. Enter a valid Db2® SSID.HLO302EDb2® subsystem ID already exists. Enter another Db2® SSID to create.HLO303EDb2® subsystem profile has empty required fields. Select option 1 to enter Accelerator Loader parameters.HLO304EMember with specified name was not found.HLO305ESubsystem with specified SSID is not defined in the control file.HLO306EConnection program load modules DSNALI, DSNHLI2, DSNWLI2, DSNTIAR, DSNHDECP were not found in specified load libraries for Db2® subsystem.HLO307IDb2® subsystem <ssid> was successfully selected.HLO308EDb2® subsystem ID is required. Enter a valid Db2® SSID.HLO309EDb2® subsystem ID is invalid. Enter a valid Db2® SSID.HLO310ESpace units field is invalid. Specify BLKS, TRKS, CYLS, KB, MB, or BYTES.HLO311EPrimary quantity field is invalid. Specify a numeric value. HLO312ESecondary quantity field is invalid. Specify a numeric value.HLO313EBlock size field is invalid. Specify a numeric value. HLO314ESpecified device type could not be found in MVS™.HLO330EFile tailoring OPEN failed: file tailoring already in progress condition. HLO331EFile tailoring OPEN failed: the output file is already in use condition -- ENQ failed. HLO332EFile tailoring OPEN returned the skeleton file or output file not allocated condition. HLO333EFile tailoring OPEN returned a severe error condition.HLO334EFile tailoring OPEN returned an unknown code -- severe error. HLO335EFile tailoring CLOSE returned a file not open condition -- severe error. HLO336EFile tailoring CLOSE returned an output file in use condition.HLO337EFile tailoring CLOSE returned a skeleton file or output file not allocated condition.HLO338E File tailoring CLOSE returned a severe error. HLO339EFile tailoring CLOSE returned an unknown code -- severe error.HLO340EFile tailoring CLOSE failed: an output member exists in the output library and NOREPL was specified. HLO341EFile tailoring INCLUDE returned a skeleton does not exist condition. HLO342EFile tailoring INCLUDE returned a skeleton in use -- ENQ failed condition.HLO343EFile tailoring INCLUDE returned a data truncation, skeleton library, or output file not allocated condition.HLO344EFile tailoring INCLUDE returned a severe error condition.HLO345EFile tailoring INCLUDE returned an unknown condition -- severe error. HLO346EAn error was encountered while allocating the ISPFILE DD - Process did not complete. HLO347EAllocation Error - An error was encountered while reading the ISPFILE DD. Process did not complete. HLO440EDevice type for work files could not be found in MVS™. Enter a valid device type for work files.HLO441E Device type for work files is required. Enter an existing MVS™ device type. HLO442E Data set type for work files is invalid. Valid data set types are BASIC and LARGE.HLO443EData set type for work files is required. Valid data set types are BASIC and LARGE.HLO444ETrack or cylinders for work files is invalid. Valid values are TRK for tracks and CYL for cylinders.HLO445ETrack or cylinders for work files is required. Valid values are TRK for tracks and CYL for cylinders.HLO446EPrimary quantity for work files is invalid. Enter a value of 1 - 16777215. HLO447EPrimary quantity for work files is required. Enter a value of 1 - 16777215. HLO448ESecondary quantity for work files is invalid. Enter a value of 1 - 16777215.HLO449ESecondary quantity for work files is required. Enter a value of 1 - 16777215. HLO450EMaximum volumes for work files is invalid. Enter a value of 1 - 255.HLO451EMaximum volumes for work files is invalid required. Enter a value of 1 - 255.HLO452EDevice type for SYSPRINT could not be found in MVS™. Enter another device type.HLO453EDevice type for SYSPRINT is required. Enter an existing MVS™ device type.HLO454EData set type for SYSPRINT is invalid. Valid data set types are BASIC and LARGE. HLO455EData set type for SYSPRINT is required. Valid data set types are BASIC and LARGE.HLO456ETrack or cylinders for SYSPRINT is invalid. Valid values are TRK for tracks and CYL for cylinders.HLO457ETrack or cylinders for SYSPRINT is required. Valid values are TRK for tracks and CYL for cylinders. HLO458EPrimary quantity for SYSPRINT is invalid. Enter a value of 1 - 16777215.HLO459EPrimary quantity for SYSPRINT is required. Enter a value of 1 - 16777215. HLO460ESecondary quantity for SYSPRINT is invalid. Enter a value of 1 - 16777215. HLO461ESecondary quantity for SYSPRINT is required. Enter a value of 1 - 16777215.HLO462EMaximum volumes for SYSPRINT is invalid. Enter a value of 1 - 255.HLO463EMaximum volumes for SYSPRINT is required. Enter a value of 1 - 255.HLO464ENumber of DDs is invalid. Enter a value of 1 - 99 for disk or 3 - 99 for tape device.HLO465ENumber of DDs is required. Enter a value of 1 - 99 for disk or 3 - 99 for tape device. HLO466EPrimary space in sort work parameters is invalid. Enter a value of 1 - 99999.HLO467EPrimary space in sort work parameters is required. Enter a value of 1 - 99999.HLO468ESecondary space in sort work parameters is invalid. Enter a value of 1 - 99999.HLO469ESecondary space in sort work parameters is required. Enter a value of 1 - 99999. HLO470ESort work unit device type is not recognized by OS/390® as a valid device type.HLO471ESort work unit device is required. Enter the unit device (SYSDA, DISK, etc.) that you want Accelerator Loader to generate when generating sort work file DDs.HLO472EUtility REGION size is invalid. Enter the REGION size in megabytes that you want Accelerator Loader to use when generating utility JCL. Enter a value of 0 - 2047.HLO473EUtility REGION size is required. Enter the REGION size in megabytes that you want Accelerator Loader to generate when generating utility JCL. Enter a value of 0 - 2047.HLO474EWhen a tape device is used, data set type, tracks/cylinders, and primary/secondary space cannot be specified. HLO475EAccelerator Loader Plan is required. Enter a value.HLO476EAccelerator Loader Plan is invalid. Enter a valid value. HLO477EDb2® ZPARMs member is required. Enter a value.HLO478EDb2® ZPARMs member is invalid. Enter a valid value.HLO479EBootstrap 01 data set could not be found in the MVS™ catalog.HLO480EDb2® Bootstrap DSN 01 is a required field. Enter the full DSN of the bootstrap data set.HLO481E Bootstrap 02 data set could not be found in the MVS™ catalog.HLO483EDb2® Loadlib1 data set could not be found in the MVS™ catalog. HLO484EDb2® Loadlib1 is a required field. Enter the DSN of the Db2® load library concatenation used during batch job processing.HLO485EDb2® Loadlib2 data set could not be found in the MVS™ catalog.HLO486EDb2® Loadlib3 data set could not be found in the MVS™ catalog.HLO487EDb2 Loadlib4 data set could not be found in the MVS catalog.HLO488EDb2® Loadlib5 data set could not be found in the MVS™ catalog. HLO489ESpecified data set for generated JCL could not be found in the MVS™ catalog.HLO490EData set name for the generated JCL is required. Enter a valid data set name.HLO491EMember name for generated JCL is invalid. HLO492EMember name for generated JCL is required.HLO494ENumber of buffers value must be 1 - 99. HLO495EChannel programs value must be numeric.HLO497EAn error occurred while checking <data_set_name> bootstrap data set: <message_text>. HLO500ESubstring specification is invalid. Follow qualifier (start, length) notation with 1-based start and length.HLO501ESubstring start position exceeds the qualifier length.HLO502ESubstring end position exceeds qualifier length. HLO503EUnknown qualifier that starts with & was specified.HLO505EFirst character of every node must be alphabetic or national.HLO506EAll characters in DSN must be alphanumeric or national. HLO507EConsecutive periods are not allowed in data set names. HLO508EData set names cannot be terminated by a period.HLO509EData set name node must be less than 8 characters. HLO510EData set name cannot exceed 44 characters.HLO511EGDG specification is invalid.HLO512EGDG specification must be the last qualifier. HLO513ESpecified qualifier is valid only for TEMPLATE specification.HLO514EInvalid DISCARDDN name.HLO520ETemplate name is required. HLO521EMember name is required for a partitioned data set. HLO522EData set name is required. HLO523ESORTNUM is valid only when SORTDEVT is specified. HLO524EPrimary and secondary space are valid only when Space unit is specified.HLO525EFlashCopy® DSN template and template name are required.HLO526ETemplate DSN is required.HLO527EAccelerator name is required. HLO528ITable has no referentially dependent tables HLO532EMember name is allowed only for partitioned data sets.HLO533ELoad time is CURRENT, but an end point was specified. Change load time to SPECIFIED or delete the end point.HLO534ELoad time is SPECIFIED. RBA end point or timestamp end point are required.HLO535ERBA end point and timestamp end point cannot be specified at the same time.HLO536EBoth primary and secondary space must be specified at the same time.HLO537EAll objects must be partitions of only one table.HLO538WSome partitions of this table are already selected. HLO539WAll partitions of this table are already selected. HLO540EQuiesce end point is valid only for load time = QUIESCE.HLO541EOnly quiesce end point is valid for load time = QUIESCE.HLO542EResume and Replace are mutually exclusive options.HLO548EInvalid timestamp. Use YYYY-MM-DD-hh.mm.ss.nnnnnn format.HLO549EInvalid time zone. Valid values are LOCAL and GMT.HLO550Efield_value value is invalid. Valid values are YES and NO.HLO551EInvalid qualifier code. Enter a numeric value of 1 - 27.HLO552ESpecified qualifier code requires a free form literal.HLO553EInvalid accelerator name is specified.HLO554EFlashCopy® = YES is valid only for load time = CURRENT.HLO558ESubstring starting position must be 1 - 8.HLO559ESubstring length must be 1 - 8.HLO560ESum of starting position and length cannot exceed 9.HLO561EInvalid load time value. Valid values are CURRENT, SPECIFIED, and QUIESCE. HLO562ERBA or LRSN end point contains invalid hexadecimal character. Valid characters are 0 - 9 and A - F.HLO563ETimestamp end point has invalid year value. Valid values are 0000 through 9999.HLO564ETimestamp end point has invalid month value. Valid values are 1 through 12.HLO565ETimestamp end point has invalid day value. Valid values are 1 through last day of specified month.HLO566ETimestamp end point has invalid hour value. Valid values are 0 through 23.HLO567ETimestamp end point has invalid minutes value. Valid values are 0 through 59.HLO568ETimestamp end point has invalid seconds value. Valid values are 0 through 59.HLO569ETimestamp end point has invalid microseconds value. Valid values are 000000 through 999999.HLO570ESYSCOPY scan operating mode is invalid. Valid values are LOCAL, RECOVER, ZPARM, and USER.HLO571ESYSCOPY selection preference is invalid. Valid value must consist of tokens LP, LB, RP, RB, and FC in any order.HLO572ELog reader copy preference value is invalid. Valid value must consist of tokens R1, R2, A1, and A2 in any order.HLO573ENumber of PARALLEL log reads must be 0 - 16.HLO574EInvalid secondary space. Valid values are 1 through 1677215 or blank.HLO575EEnter a profile creator.HLO576EEnter a valid data set name.HLO577EEnter a valid member name.HLO578EEnter a valid profile name. HLO579EInvalid share option. Valid options are UPDATE, VIEW ONLY, and NO ACCESS.HLO580EInvalid value. Valid values are / or empty.HLO581EInvalid DISCARDS value. Valid values are 0 through 2147483647. HLO582EInvalid LOG value. Valid values are YES, NO, and NOCOPYPEND.HLO583EInvalid NUMRECS value. Valid values are 1 through 1099511627776 and blank.HLO584EInvalid SORTNUM value. Valid values are 2 through 255 and blank.HLO585EInvalid SORTDEVT value. Valid values are disk or tape devices and blank. HLO586EInvalid disposition. See documentation for valid syntax.HLO587EInvalid unit type. Unit type must be a valid DASD type.HLO588EInvalid space unit. Valid values are CYL, TRK, MB, and blank.HLO589EInvalid primary space. Valid values are 1 through 1677215 and blank.HLO590EInvalid PCTPRIME. Valid values are 0 through 100 and blank.HLO591EInvalid MAXPRIME. Valid values are 0 through 99999999 and blank.HLO592EInvalid NBRSECOND. Valid values are 1 through 10 and blank.HLO593EInvalid profile type. Valid profile types are CONSISTENT and DUAL.HLO594EInvalid profile type. Enter one of the listed values (ALL,1-7).HLO595EInvalid templateName template DD name. HLO596EInvalid quiesce end point. Valid values are 1 through 999.HLO597EInvalid template name. HLO598EInvalid substring qualifier code. Valid values are 1 through 25.HLO599WIncomplete profile was saved successfully.HLO600IEdited profile was saved successfully. HLO601ICreated profile was saved successfully.HLO602IRenamed profile was saved successfully. HLO603ECannot load profile description from repository.HLO604EIncomplete profile. Edit profile to specify required options.HLO605EProfile is inaccessible for specified action.HLO606EProfile with the same creator, name, and type already exists.HLO607ECannot open table column info data set.HLO608ECannot open data set for JCL generation.HLO609ECannot create data set for JCL generation.HLO610IJob was built successfully. HLO611EAccelerators are not associated with this Db2® subsystem.HLO612IProfile was deleted successfully. HLO613EThis table is not supported.HLO614WProfile without tables was saved successfully. HLO615ENo tables were specified in the profile. HLO616EInvalid utility ID. Valid values are blank and strings of letters, numerals, and symbols (@, $, #, !, ¬). HLO617EInvalid parallel task value. Valid values are blank or 1 - 20.HLO618EInvalid <template_name> DSN template. A valid template must contain the &&PART or &&PA variable.HLO619EInput DSN template and template name are required for parallel load.HLO620ENumber of PARALLEL log apply must be 1 - 10. HLO621EInvalid value. Enter a number from 1 to 7.HLO623IThe profile has been converted to the current product version.HLO624EInvalid value. Enter a valid value (No, Add, or Refresh).HLO625EData server ID is required. Enter a valid data server ID.HLO626EData server ID is invalid. Enter a valid data server ID.HLO627EInvalid value. Adding table to accelerator with refresh is denied when RESUME is enabled.HLO628EInvalid Encoding value. Enter a valid value: UNICODE or EBCDIC.HLO629EEncoding value does not match encoding scheme of selected table. HLO630EColumn info DSN value must be empty when Format is set to Internal value.HLO631ETarget tables must be specified for each table being loaded if Target SSID differs from current SSID.HLO632ETarget tables must be the same for all partitions or different for each partition.HLO633EToo many accelerators selected. Maximum number of accelerators allowed: <max_accelerators>.HLO634EInvalid table lockmode value. Valid values are NONE, TABLE, TABLESET, PARTITIONS, ROW.HLO635EInvalid load tasks value. Valid values are blank or number between 1 and 30.HLO636EMultiple accelerators for AOT table <creator>.<name> are not supported.HLO637EInvalid selection. Specify either exactly one group name or a list of accelerator names.HLO638EDisposition is required. Enter a valid data set disposition. HLO639EInvalid disposition. See the documentation for valid syntax. HLO640ESpace units field is invalid. Specify TRK or CYL.HLO641EExpiration date is invalid. Specify a valid value.HLO642ERetention period date is invalid. Specify a numeric value.HLO643EData set type is invalid. Specify EXTREQ, EXTPREF, LARGE, BASIC, or blank. HLO644EAt least one of local site primary, local site backup, recovery site primary, or recovery site backup copy data sets must be specified. HLO645EA backup copy for either site may only be created when a primary copy is also being created for that site. Specify a valid primary copy data set value.HLO646EThe retention period and expiration date fields cannot be entered at the same time.HLO647EThe member name Db2 ZPARMs member does not exist.HLO648ELoad entry name entry point from DD name DD has failed. RC = code, reason = code.HLO649EThe data set name copy data set specified for creator.name Db2 table does not exist.HLO650EA full copy does not exist for the specified point in time for creator.name table and site type site type.HLO651EA usable full copy does not exist for creator.name table and site type site type.HLO652EThe most recent full copy for the specified Point in time for creator.name table is not usable.HLO653EA backup copy data set is not specified for creator.name recovery table with Point in time value set to SELECTED.HLO654EPoint in time is TIMESTAMP. The Timestamp end point value is required.HLO655EInvalid Point in time value. Valid values are CURRENT, TIMESTAMP, and SELECTED.HLO656EPoint in time is not TIMESTAMP, but a Timestamp end point was specified. Change Point in time to TIMESTAMP or delete the Timestamp end point value.HLO657ENo usable backup copy data sets found for creator.name recovery table.HLO658EThe data set name backup copy data set for creator.name table does not exist on MVS.HLO659EInvalid Check data operating mode value. Valid values are No, Write, or Operation.HLO660EInvalid input file format value. Valid values are Internal, Delimited, and blank.HLO661I Input file format options are available for Delimited Format value only. HLO662EInvalid delimiter character. The delimiter character can be specified as either a character or hexadecimal constant. HLO663EThe same character cannot be specified for more than one type of delimiter. HLO664EAccelerator defined in group does not exist. HLO665EAccelerator <accelerator_name> with NOT FOUND status cannot be selected for load.HLO666EMore then one accelerator with same name <accelerator_name> is selected. HLO700EAn error occurred while opening the Db2® load libraries: RC = return_code.HLO701EAn error occurred while attaching the Db2® attachment facility subtask: RC = return_code.HLO702EThe task is not running APF-authorized.HLO703SThe Db2® attachment facility subtask ended unexpectedly: RC = return_code.HLO704EThe specified user ID and password are invalid.HLO705EThe specified password for user ID has expired.HLO706EAccess for the specified user ID userID has been revoked.HLO707EAn error occurred while performing authentication: SAF RC = return_code, RC = return_code, RSN = return_code.HLO708EAn invalid dynamic allocation parameter was specified: code = code.HLO709EA dynamic allocation error occurred: info code = infoCode, error code = errorCode.HLO710EDynamic allocation query error occurred: info code = infoCode, error code = errorCode.HLO711EDynamic free error occurred: info code = infoCode, error code = errorCode.HLO712EDynamic concatenation error occurred: info code = infoCode, error code = errorCode.HLO713ESQL error occurred: SQL code = sqlCode, SQL state = sqlState.HLO714ESQL error text (SQL code: code. Program: program name. Statement: line number. Type: type). HLO715SDb2® attachment facility error occurred: function = functionCode, RC = return_code, reason = reasonCode.HLO716EInput Db2® command is too long. HLO717EError occurred while making an IFI call.HLO722EAn error occurred while writing converted record (profile id=<id>, type=<type>, number=<number>.HLO723IProfile <profile creator>.<profile name> for <ssid> was converted successfully.HLO724WProfile <profile creator>.<profile name> for <ssid> was partially converted.HLO725EAn error occurred while writing converted profile <profile creator>.<profile name> for <ssid>. HLO726ITotal read profile count: <number_of_profiles>.HLO727ITotal converted profiles count: <number_of_profiles>.HLO728ITotal converted profiles count: <number_of_profiles>.HLO810EInvalid CNUM parameter. Valid parameters are ON, OFF, or blank. HLO811EInvalid COLS parameter. Valid parameters are ON, OFF, or blank. HLO812IThe FIND command requires a match string HLO813EThe RFIND key can only be used after a FIND character string is entered. HLO814EAn unknown column column was specified.HLO815ESORT is not supported for the specified column. HLO816EMax Sort Columns exceeded. Sorting first 9 columns. HLO817EInvalid column selection. Set cursor to valid column. HLO818EInvalid command parameters. HLO819EInvalid location for the moved column. The source column cannot be moved to the new position. HLO820ENot enough space for scrolling unfixed columns. HLO821EOperation not valid for specified column. HLO822EFixed columns cannot be hidden. HLO823EInvalid value entered for column size: non-numeric data. HLO824EInvalid value entered for column size: out of range. HLO825ESIZE is not supported for the specified column. HLO870ETBCREATE failed. RC= return_code.HLO871ETBOPEN failed. RC= return_code.HLO872ETBCLOSE failed. RC=return_code.HLO873ETBDELETE failed. RC=return_code.HLO874ETBMOD failed. RC= return_code.HLO875ETBGET failed. RC= return_code.HLO876EView table is in use. HLO877E View library not allocated. HLO878E TBTOP failed. RC=return_code.HLO879E TBSKIP failed. RC= return_code.HLO880EHALOAD Monitor Sleep (HALOAD_MONITOR_SLEEP) value is invalid.HLO881EHALOAD Monitor Timeout (HALOAD_MONITOR_TIMEOUT) value is invalid.HLO940EInvalid selection character. Valid values are "F" and "U".HLO941EColumn move failed: invalid location. HLO942EInvalid column size. Column size must be numeric. HLO943EInvalid column size. The specified value is out of range. HLO944ETotal fixed column sizes cannot exceed screen size. HLO945EConfiguration request failed: at least one unfixed column would not be displayed HLO946EConfiguration request failed: the unfixed area would be too small to display this column. HLO947EConfiguration request failed: not all columns can be displayed. HLO948EInvalid FIXed selections. Operation would not leave enough space for this column. HLO949EDuplicate Cmd values entered. HLO950EInvalid sort number. Enter a valid numeric digit. HLO951EDuplicate sort sequence number. HLO952ESort sequence skips a number. HLO953EInvalid Dir entered. Direction must be A (ascending) or D (descending). HLO954EDir not valid without Ord. HLO955EFixed columns cannot exceed screen size. HLO956EInvalid entry. Cmd values must be numeric. HLO957EInvalid entry for permanent column. HLO958EInvalid entry for fixed column. HLO959EInvalid entry for unfixed column. HLO960EInvalid Column Function value. Valid values: 1, 2, 3, and 4. HLO961EInvalid Permanent View value. Valid values: Y, N. HLO962EInvalid Reset View value. Valid values are Y, N. HLO963EInvalid Stop Sorting value. Valid values: Y, N. HLO964EInvalid data set name. HLO965EInvalid member name. HLO966EUnable to allocate the report file. HLO967EUnable to open the report file. HLO968EInvalid selection character. Valid values: "H" and "U".HLO970ETBCREATE failed. RC = return_code.HLO971ETBOPEN failed. RC = return_code.HLO972ETBCLOSE failed. RC = return_code.HLO973ETBDELETE failed. R C= return_code.HLO974ETBMOD failed. RC = return_code.HLO975ETBGET failed. RC = return_code.HLO976EView table is in use.HLO977EView library not allocated. HLO980IDiscovery process completed successfully.HLO981EControl file <control_file_name> not found.HLO982EConfiguration <configuration_ID> was not found in the control file.HLO983EPrevious installation library <installation library_name> not found.HLO984EOptions module <options_module> was not found. Enter a valid previous installation location and options module name.HLO1000ACould not obtain SSID from input parameters.HLO1001ACould not open the SYSOUT DD.HLO1002AInvalid SYSOUT DD LRECL.HLO1003EThe param_name keyword has already been coded for this space group.HLO1004EThe param_name keyword group has already been coded for this space group.HLO1005EThe param_name keyword has already been coded for this run.HLO1006EThe param_name keyword has already been coded for this group.HLO1007EThe param_name keyword coded multiple times for the same object.HLO1008EThe param_name keyword has already been coded.HLO1009EThe param_name keyword group has already been coded.HLO1010EThe following space is not set to LOG for a required log range.HLO1011EThe following space's input image copy was migrated and could not be recalled.HLO1012ENo valid full image copy in the SYSCOPY history was found for space(s): spacesHLO1013EA table update ICTYPE was found in SYSCOPY that did not log for space(s): spacesHLO1014IDatabase: database Space: space Partition: partitionHLO1015ECould not determine disk/tape status of unit name unit_name (from control file). HLO1016EThe device type of the unit name from the control file could not be determined.HLO1017EThe REPORT utility returned an unrecoverable error.HLO1021EThe TO_QUIESCE control card was specified, but no quiesce point(s) was found.HLO1022EThe stop point precedes the start point for space: database_name.space_name part: partition Start point X'startpoint' End point X'endpoint' Start timestamp: start_timestamp End timestamp: end_timestamp.HLO1023IThe version of Db2 [subsystem|group attach] [ssid|member_name] is ver.HLO1024EThe keyword value cannot be 0.HLO1025IControl card stream process complete. Selected space count =space count.HLO1026EThe following space was converted to PBR RPN after image copy was taken.HLO1027ILOADER will read DSN: data_set_name for [table space| index space] space name PART part LRSN/RBA=X'lrsn/rba' ICTYPE='ictype’ STYPE='stype' SHRLEVEL='shrlevel’ ICBACKUP='icbackup’.HLO1028IThe image copy is of all parts.HLO1029IThe image copy contains one partition (partition_number).HLO1030EA concurrent image copy was found in the SYSCOPY history. It cannot be used.HLO1031IOnly partition partition within the image copy will be updated with log data and written to an individual partition image copy.HLO1032IAll partitions will be updated with log data.HLO1033EThe specified dataset name does not exist.HLO1034ILOADER will process the log only for [table space | index space] space_name PART part LRSN/RBA=X'lrsn/rba ICTYPE=’ictype’ STYPE='stype' SHRLEVEL='shrlevel’ ICBACKUP='icbackup’.HLO1035EAn image copy was found, but its RBA precedes the logging start point.HLO1036ILOADER processing ends.HLO1037IProceeding anyways due to inclusion of the CONTINUE_ON_ERROR control card.HLO1038EAn incremental image copy was marked as cataloged in SYSCOPY, but was not found in the MVS catalog.HLO1039EAt least two end points within a single GROUP() are not the same.HLO1040E[task_number] The SPACE(...) set involved that the error was detected in was #'number'HLO1041WAn error occurred during processing, but was overriden. Check all messages.HLO1042WAll objects are marked to skip. Log reading and further processing skipped.HLO1043WAt least two end points within a single GROUP() are not the same.HLO1044Werror_messageHLO1045EAn error occurred while attempting to load the Db2® call attach service.HLO1046IThe space processing database_name.space_name partition: partition set TO_CURRENTHLO1047EThe keyword_1 value was already specified before keyword_2 in a control group.HLO1048EThe HLO runtime environment is not consistent. Installation error.HLO1049I"database_name.space_name" Part #nnnnn Consistent RBA/LRSN = X'rba/lrsn'HLO1050EThe keyword keyword was specified without value.HLO1051EThe keyword keyword value is either empty or too long.HLO1052EThe [table|index] [CREATOR|NAME|INDEX] keyword was specified without value.HLO1053EThe target table space cannot be configured for multiple tables.HLO1054WSpace order collision detected.HLO1055IRound-robin distribution used on #space_count space into #group_count group.HLO1056ISequential distribution used on #space_count space into #group_count group.HLO1057EAdd tables macro internal error.HLO1058EAdd or Remove+Add tables function could not connect to Db2.HLO1059WWarnings generated by the ADD_TABLES stored procedure: warningsHLO1060EAdd or Remove+Add tables stored procedure error.HLO1061EUnknown Add or Remove+Add tables stored procedure return code.HLO1062Eerror_textHLO1063EError call sysproc.accel_set_tables_acceleration table owner.name severity severity, reason reason.HLO1064IError text: textHLO1065IError description: textHLO1066IError action: textHLO1067EError; could not parse XML output. XML output follows.HLO1068EError call sysproc.accel_get_tables_details table owner.name severity severity, reason reason.HLO1069EInvalid syntax after [IDAA_LOAD_IC|IDAA_CONSISTENT_LOAD|SPACE|GROUP] control card. Expected ''(''.HLO1070IThere is no table for which to enable acceleration.HLO1071IAcceleration enabled for table owner.table.HLO1072EThe start RBA or LRSN value has an invalid length.HLO1073I[ACCEL_ON_SUCCESS_ENABLE|ACCEL_ADD_TABLES|ACCEL_REMOVE_AND_ADD_TABLES] function is ignored on AOT runs.HLO1074IFallback occurred for DSN: data_set_name table space: database_name.space_name PART: partition LRSN/RBA=X'lrsn/rba' .HLO1075EThe specified IC was taken before object was converted to use RPN space database_name.space_name. HLO1076WThe SPACE(...) set involved that the warning was detected in was #number.HLO1077IThe member member_name of the data sharing group will not be processed because it has no SYSLGRNX data.HLO1078WFetching SYSIBM.SYSLGRNX data by SQL produced an error. The skipping of the quiesced members of the data sharing group will not be performed.HLO1079E[task_number] The Call Attach Facility returned an error. Message text follows:HLO1080EThe parameter_name parameter value is invalid.HLO1081EThe [table|index] [CREATOR|NAME] parameter value is invalid.HLO1082EInvalid keyword_name syntax. HLO1083EThe keyword_name value has mismatched apostrophes. HLO1084EInvalid syntax after the keyword_name control card. Must be keyword_name (...).HLO1085EThe keyword_name parameter was specified, but one of the subparms was out of range.HLO1086ESyntax error around keyword_name value. Form is valid_form.HLO1087EThe keyword_name value contains an invalid hexadecimal value.HLO1088EThe first control card was not a request for LOADER.HLO1089EOne of the following end points must be specified: TO_CURRENT, TO_QUIESCE, END_RBA, END_LRSN, TO_IC, or TOLOGPOINT.HLO1090EOnly 1 end point (END_RBA, END_LRSN, TO_CURRENT, TO_QUIESCE, TO_TIMESTAMP, TO_TIMESTAMP_LOCAL, TO_IC, TOLOGPOINT) can be specified.HLO1092EA token value was found that was either not part of the LOADER set or was misplaced in the LOADER control cards. The value of the invalid token is: keywordHLO1093EA table/index space name pair or index name pair is incomplete.HLO1094EThe space database_name.space_name was not found in the Db2 catalog. Space# number.HLO1095EA partition was specified for database_name.space_name but the space is non-partitioned.HLO1096EA partition was specified for database_name.space_name but the partition is not defined.HLO1097EIn a data sharing environment, specifying RBA values is not allowed.HLO1098EIn a non-data sharing environment, specifying LRSN values is not allowed.HLO1099EThe command set must end with a close parenthesis '')''.HLO1100E[task_number] Dynamic allocation return code = return_code.HLO1104Etask_number The most recent full image copy could not be allocated.HLO1105Etask_number The work file for sorting the full image copy file could not be allocated.HLO1106Etask_number Error TCBTOKEN could not get token.HLO1107Etask_number The most recent full image copy could not be opened.HLO1108Etask_number Error IARV64 GETSTOR could not obtain storage.HLO1109Itask_number Image copy name= image_copy_name LRSN/RBA=X'lrsn/rba'.HLO1110Etask_number An invalid return code was detected from the SORT program.HLO1111Itask_number The full image copy data_set_name could not be deallocated. HLO1112Itask_number The sort of the REORG inline full image copy file was successful.HLO1113Itask_number The sort of the re-keyed REORG inline full image copy file was successful.HLO1114Itask_number The sort of the LOAD inline full image copy file was successful.HLO1115Itask_number The sort of the re-keyed LOAD inline full image copy file was successful.HLO1116Etask_number The catalog check on the most recent image copy failed.HLO1117Etask_number Error processing was aborted by repeated error.HLO1118Etask_number Unexpected EOF was detected while reading full IC page.HLO1119Etask_number Error closing full IC.HLO1120Etask_number An invalid return code from a sequential VSAM read was detected.HLO1121Itask_number Db2 Sort block mode used.HLO1122Itask_number The sort of the COMPRESSED full image copy file was successful.HLO1123Itask_number The sort of the re-keyed COMPRESSED full image copy file was successful.HLO1124Etask_number Error IARV64 DETACH could not release storage.HLO1125Etask_number Unrecoverable I/O error on image copy. Process aborted.HLO1126Itask_number The $ORTPARM override DD is present in the job step JCL.HLO1127Itask_number The $ORTPARM DD could not be loaded. Using system defaults.HLO1128Itask_number The [$ORTPARM | $DB2PRM$] DD could not be allocated. Using system defaults.HLO1129Itask_number The $DB2PRM$ override DD is present in the job step JCL.HLO1130Itask_number The $DB2PRM$ DD could not be loaded. Using system defaults.HLO1131Itask_number member_name Log range LRSN X'lrsn' to X'lrsn' is being processed. (begin_time) (end_time).HLO1132Itask_number subsystem_name Log range RBA X'rba' to X'rba' is being processed.HLO1133Etask_number The output full image copy [LP|LB|RP|RB] could not be opened. DDNAME=ddname.HLO1134EThe command set has extra parameters after the close parenthesis.HLO1135EThe SYSINHLO DD card could not be found in the JCL.HLO1136EThe SYSINHLO DD card could not be opened for input.HLO1137EThe SYSINHLO DD input stream is empty.HLO1138EThe parsing process gave an invalid return code.HLO1139EThe functional limit of Db2® Analytics Accelerator Loader is 20000 Space control card groups.HLO1140EThe following object is specified at least 2 times in the control cards:HLO1141EDuplicate objects found in control card stream: database_name.space_name PART part SPACE NUMB space_number.HLO1142Etask_number Dynalloc function error DSN data_set_name rc= return_code, reason= reason_code.HLO1143Etask_number Error processing IDCAMS output. Output follows: HLO1144Etask_number The number of pages in the incr. image copy is inconsistent with the page size.HLO1145Etask_number An unexpected EOF was encountered on the sorted log records file.HLO1146Etask_number The selected full IC has a DBID/PSID mismatch to the Db2 catalog.HLO1147Itask_number Number of pages read from the full image copy file(s)=num.HLO1148Itask_number Number of pages read from the incremental image copy file(s)=num.HLO1149Itask_number Number of records read from the log apply file=num.HLO1151Itask_number Number of pages written to the table/index space file(s)=num.HLO1155IControl card stream processed by LOADER follows...HLO1156ILOADER processing messages follow...HLO1158EThe GROUP(...) set involved that the error was detected in was #number.HLO1159ILOADER version APAR_release_number assembly_date assembly_time.HLO1163Etask_number A CELL64 free request failed.HLO1167EOperations on the Db2 directory are not allowed.HLO1168EOperations on the Db2 Catalog table space DSNDB06.SYSCOPY are not allowed.HLO1169ESpace can be designated as DATA_BASE SPACE_NAME pair, or CREATOR INDEX pair.HLO1171Etask_number The [LP|LB|RP|RB] image copy spanned tape could not be freed for a device switch.HLO1172Etask_number The initial [LP|LB|RP|RB] image copy could not be allocated onto the tape device.HLO1174Etask_number The [LP|LB|RP|RB] image copy could not be allocated to the DASD device.HLO1175Etask_number The spanned [LP|LB|RP|RB] image copy on tape could not be opened.HLO1176EThe object creator.name was not found in the Db2 catalog. Space #number.HLO1177EThe value was not properly enclosed with apostrophes.HLO1178EThe index does not currently have COPY=YES activated in Db2.HLO1179IThe index creator.name was mapped to indexspace database_name.space_name Space# number.HLO1180EThe LOCAL_SITE and RECOVERY_SITE control cards cannot be specified together.HLO1182EData set data_set in Db2 loadlib concatenation was not found in the MVS catalog.HLO1189EFailed to expand alias alias in Db2 loadlib concatenation.HLO1190E[task_number] While trying to read zparm_name information, the program finished with code hexadecimal_return_code.HLO1196EThe TOLOGPOINT value was already specified before END_LRSN in a control group.HLO1198EThe grouping end point conflicts/duplicates a SPACE() level end point.HLO1200EThe subsystem LOADER was started with could not be found in JES2.HLO1201EThe subsystem LOADER was started with is not active in JES2.HLO1202EThere are no active Db2 members on this machine for this data sharing group.HLO1203IDb2 subsystem subsystem is not defined to z/OS®. Using group attach name instead.HLO1204IDb2 subsystem subsystem is not active on z/OS®. Using group attach name instead.HLO1205IThe startup parameter used in JCL is the group attach name.HLO1206IThe following subsystems are part of the data sharing group:HLO1207ISubsystem: Member ID: Defined to z/OS®: Active:HLO1208Isubsystem member_id system statusHLO1209ALOADER is not in an APF authorized concatenation, but is required to be.HLO1210ALOADER needs to run from a //STEPLIB concatenation.HLO1211AThe following data set in the //STEPLIB concatenation is not APF authorized: data_set.HLO1212AAn internal error occurred attempting to ascertain APF authorization status.HLO1213Etask_number The space database_name.space_name resulted in the error condition.HLO1219Etask_number No references to subsystem subsystem could not be found in the JES SSCT.HLO1220Etask_number The sorted log file could not be allocated.HLO1221Etask_number The sorted log file could not be opened.HLO1224Itask_number Object: DB: database_name TS/IS: space_name Part: partition.HLO1226Itask_number The sort of the applicable log records was successful.HLO1227Etask_number The SORT program does not support the use of tape devices for sort work data sets.HLO1228Etask_number The allocate cellpool request for IDAA buffers failed.HLO1229Etask_number An invalid return code was detected from the SORT program.HLO1230Etask_number Invalid image copy DSN: image_copy_dsn.HLO1255EThe space database_name.space_name PART partition has an unknown space status.HLO1256EThe stop status check for space database_name.space_name PART partition timed out.HLO1257EFetching SYSIBM.SYSLGRNX data produced an error.HLO1258EREPORT utility text follows: text.HLO1259ISkipping SYSIBM.SYSLGRNX processing.HLO1260EFetching SYSIBM.SYSLGRNX data by SQL produced an error.HLO1261EControl file values could not be read. Check for a user indicator mismatch. #nnnHLO1262WFetching SYSIBM.SYSLGRNX data by SQL produced a warning. GET DIAGNOSTIC output follows: ALL STATEMENT: statement ALL CONDITION: condition.HLO1263IFetching SYSIBM.SYSLGRNX data by SQL from LRSN/RBA X'lrsn/rba' to LRSN/RBA X'lrsn/rba'.HLO1264INo SYSLGRNX data present for the objects.HLO1265WTrying to use REPORT utility.HLO1266EThe Db2 subsystem ID was not found in the control file.HLO1267EThe Db2 subsystem member member was not found in the control file.HLO1268ELOCAL_SITE, RECOVERY_SITE, and IMAGE_COPY_PREFERENCE are mutually exclusive.HLO1270EFive or more errors have been detected in the control cards.HLO1272EInvalid TO_QUIESCE(#nnn) control card syntax.HLO1275EUse of the USE_ABOVE_THE_BAR keyword requires z/OS V1.5 or above.HLO1277WThe REPAIR_RECOVER_PENDING keyword is ignored when only writing to copies.HLO1278WDb2 Sort was called for but was not found in z/OS.HLO1280WIf manual group configurations are used, parallel log apply value is ignored.HLO1281Etask_number A required incremental image copy could not be allocated.HLO1282Etask_number A required incremental image copy could not be opened.HLO1283Etask_number An internal error occurred during input incremental tape stacking processing.HLO1284Itask_number LOADER will process the following incremental image copy file(s):HLO1285Itask_number For table space: database_name.space_name PART part.HLO1286Etask_number A log record read service program could not be started.HLO1287Etask_number The writer service returned an error, RC=X'return_code'.HLO1288Etask_number The reader service returned an error, RC=X'return_code'.HLO1289IThe log apply process will begin at RBA=X'rba' [and timestamp timestamp].HLO1290IThe log apply process will begin at LRSN: X'lrsn' (timestamp).HLO1291EThe Db2 command processor responded with a nonzero return code. RC = X'return_code' RS='reason_code'.HLO1294IThe log reader process will launch a total of nnn tasks.HLO1295IThe log reader will launch a total of 1 task per member.HLO1296IThe log reader process will start with PARALLEL tasks = nnn.HLO1297Itask_number The log reader task #task_number finished.HLO1298Etask_number The log reader task init failed. RC=X'return_code'.HLO1299ICheckpoint was created for db2_subsystem_name.HLO1300IThe ENQs for the spaces were successful.HLO1301EThe ENQ for database database_name.space_name PART part was not successful.HLO1309EOBIDXLAT input override parameters found without output parameters.HLO1311EThe keyword was not found in the MVS catalog.HLO1319WIncremental method SORT is obsolete. MERGE mode used instead.HLO1320EAt least one SPACE() control card set is required.HLO1321EOne of TO_CURRENT, TO_QUIESCE, END_RBA, END_LRSN, or TOLOGPOINT must be specified.HLO1326EError token: token has an empty value. Space# numberHLO1327EError token: token appears more than once. Space# number.HLO1328EError token: token has an invalid value: value. Space# number.HLO1329EError token: token1 is unexpected with token: token2. Space# number.HLO1330EError token: token1 using require token: token2.HLO1331EThe FCCOPYDDN keyword can be used with NEW_COPY.HLO1332IIssuing HRECALL for the image copy data set data_set_name.HLO1357EA log apply task could not be started.HLO1358ELog apply task returned an error, RC=X'return_code'.HLO1360EThe initialization phase of Db2 Sort failed.HLO1361EThe resource optimization phase [1|2] of Db2 Sort failed. RC='return_code'.HLO1362EThe terminate phase of Db2 Sort failed.HLO1363EThere is not enough storage to perform the desired number of parallel sorts.HLO1364EInsufficient total storage to perform the desired number of parallel sorts.HLO1365EThe log apply tasks ended abnormally. Check messages.HLO1366EThe Db2 command processor responded with a bad return code.HLO1367WAn object could not be set to STOPPED status.HLO1368EThe pipe mechanism initialization function returned an error.HLO1369EThe pipe mechanism cleanup function returned an error.HLO1370EThe common storage name/token pair could not be found.HLO1371EAn error occurred while calling IEANTRT to get the name/token pair.HLO1372EA table was specified that was already being loaded.HLO1373EA table did not have a matching entry in common storage.HLO1374EAn error occurred attempting to open a pipe.HLO1375EAn error occurred attempting an open on a pipe.HLO1376EAn error occurred attempting to create a name/token pair.HLO1377EAn error occurred attempting to call the system post function.HLO1378EAn error occurred while attempting to attach ACCEL_LOAD_TABLES.HLO1379EThe ACCEL_LOAD_TABLES stored procedure ended prematurely.HLO1380EThe call to connect to Db2 returned an error.HLO1381EThe call to open the connection to Db2 returned an error.HLO1382EThe ACCEL_LOAD_TABLES stored procedure returned an error.HLO1383EThe ACCEL_LOAD_TABLES stored procedure returned an SQLCODE other than +466.HLO1384EThe ACCEL_LOAD_TABLES stored procedure returned an unexpected SQLCODE.HLO1385EThe ACCEL_LOAD_TABLES stored procedure abended.HLO1386EThe pipe interface program returned an unknown error.HLO1387Emessage_textHLO1388IDDname = ddname.HLO1389ISSID = ssid.HLO1390ISSID = ssid Plan name = plan_name.HLO1391IReturn code = return_code.HLO1392Etable_informationHLO1393EPartition #partitionHLO1394EAn invalid return code was detected from the SORT program (*).HLO1395ESort program could not be started.HLO1396IWLM address spaces used: ASIDs.HLO1399EThe control file contains duplicate BSDS dataset names.HLO1400EError token: token, unexpected end of input stream.HLO1401EError token: token, open or close parenthesis expected.HLO1402ECould not start log record writer.HLO1403IThe start timestamp is timestampHLO1412EError token: token, invalid value value.HLO1413EError token: token, appears more then once.HLO1414EError token: token, value overflow.HLO1415EError token: token1, require token token2.HLO1416EError token: token, have no parameters.HLO1417EThe TO_TIMESTAMP value could not be converted. CONVTOD macro return code: return_code. Space# number. HLO1418IAll start points and usable mini logs are Sharelevel Reference or a WRITE_TO_VSAM operation TO_CURRENT is in progress. Checkpoint processing skipped.HLO1419E[task_number] A mismatch between passed ZPARM information and the JES SSCT was found.HLO1420EThe TO_TIMESTAMP value was already specified before END_LRSN in a control group.HLO1421E[task_number] An unexpected error occurred while trying to read the bootstrap data set. HLO1422EDouble count CREATOR keyword without NAME keyword between.HLO1423IA maximum of nnn sorts will run when sorting log records.HLO1425EDouble count NAME keyword without CREATOR keyword between.HLO1426EThe SPAC() node contains tables from inconsistent database/tablespace.HLO1427EAn unexpected EOF was encountered. Check for missing continuation.HLO1428EContinuation was called for but EOF was encountered.HLO1429EUnexpected EOF encountered while reading control cards.HLO1430EUnexpected EOF encountered while token token value expected.HLO1431EConsistent Load operations require at least V11 of Db2. This Db2='db2_version'.HLO1432ITable owner.table state state type type.HLO1433EError to check IDAA name.HLO1434EError IDAA name invalid state.HLO1435EError exec -DIS ACCEL command rc = return_code, rs = SQLSTATEHLO1436EError table owner.table part number state state type type.HLO1437WWarning table owner.table part number state state type type.HLO1438SThe global Loader intercept is not active.HLO1439SThe selected Db2 system is not on the Loader started task intercept list.HLO1440SThe selected Db2 system is not configured for intercepts by the Loader.HLO1441E Table owner.table removed from processing. Multiple tables per table space unsupported.HLO1442E Could not determine RBA of TO_TIMESTAMP point.HLO1443ECould not find log data set to determine RBA of TO_TIMESTAMP point.HLO1444ITable owner.table part part state state type type.HLO1445EThe end point selected is inconsistent with the run type.HLO1446EThe DBID, PSID, and at least one OBID must be specified.HLO1447EWhen a segmented object is loaded, OBIDXLAT information must be specified.HLO1448EKeywords OBIDXLAT and OBIDXLAT_CATALOG can not be specified at the same time.HLO1449WWarning table 'owner.table' state state type type.HLO1450EBoth the ACCEL_ADD_TABLES and ACCEL_REMOVE_AND_ADD_TABLES keywords are present.HLO1451EMultiple TARGET_CREATOR keywords specified without required TARGET_NAME.HLO1452EMultiple TARGET_NAME keywords specified without required TARGET_CREATOR.HLO1453EThe target control cards must be specified together or not at all.HLO1454EMixed object types not allowed.HLO1455E Internal error in determining the potential group attach name for TARGET_SSID.HLO1458ENo more than ten accelerator names are allowed.HLO1465EThe ACCELNAME keyword has not been specified and is required.HLO1468EThe number of partitions specified for database_name.space_name is not the same as the base object.HLO1469EThe following dataset in the Db2 Loadlib concatenation is not APF authorized: dsn.HLO1470Etask_number The Accelerator Loader conversion program returned an error. HLO1471EThe Accelerator Loader row conversion program ended unexpectedly.HLO1472Etask_number The cellpool services get function returned an error.HLO1473Etask_number The input image copy can only contain one table.HLO1474Etask_number Error starting image copy reader.HLO1475Etask_number An internal error determining object page size occurred.HLO1476Itask_number Processing universal table spaces.HLO1477Itask_number Begin Log Apply Summary Report.HLO1478INo USER_INDICATOR was specified. Using the default value HLO.HLO1479Etask_number CHECK function detected an inconsistent page structure. Code: X'hexadecimal_code' Page # X'page_num'.HLO1480INo checkpoint was taken for ssid because it is quiesced.HLO1483Etask_number Failed to [allocate|open] IDCAMS [input|output] DDNAME.HLO1484Etask_number IDCAMS call failed when processing ALTER volume functions.HLO1485Etask_number The ATTACH XML string IDs update program failed.HLO1486Etask_number The XML string IDs update program failed.HLO1487Etask_number The XML string IDs input DSN is missing.HLO1488Etask_number The XML string could not be found on current SSID.HLO1489Etask_number The XML string ID could not be found in XML string IDs import data set.HLO1490Etask_number The fetch of the Storclass definition from SMS failed.HLO1494INumber of pages passed to the accelerator(s)=num HLO1495Wtask_number The copy contains more partitions than object (more than number_of_partitions_in_object).HLO1496Wtask_number The copy contains only n partition(s), but object has m partition(s).HLO1497Etask_number LOADER encryption key retrieving module returned rc = return_code.HLO1498Etask_number The copy contains more partitions than object (more than number_of_partitions_in_object).HLO1499Etask_number The copy contains only n partition(s), but object has m partition(s).HLO1500Etask_number The hash anchor X'nnn' was not found on the page X'page_number'.HLO1501Etask_number The following log data set is required for processing but got an error:HLO1502Etask_number A gap was found in the logs needed for processing. Last usable log was:HLO1503Itask_number archive_log_dsn.HLO1504E[task_number] A desired log range cannot be found in any active/archive log.HLO1508EError allocate DD ddname, rc=return_code rs=reason_code.HLO1509EError deallocate DD ddname, rc=return_code rs=reason_code.HLO1510Itask_number Error code #1: code_1 #2: code_2.HLO1511EError set estae DD ddname, rc=return_code rs=reason_codeHLO1512EError open DD ddname, rc=return_code rs=reason_codeHLO1513EError close DD ddname, rc=return_code rs=reason_codeHLO1514Etask_number An error was detected during end log processing for subsystem subsystem RC=return_code.HLO1515Itask_number Log accumulate processing is beginning on subsystem ssid.HLO1516Etask_number Above the bar storage exhausted.HLO1517EError ATTACH module FEC#UTLB rc=return_codeHLO1518Itask_number member_name Reading [active | archive] log log_dataset_name.HLO1519Wtask_number member_name Log reader operating in no consistency checking mode.HLO1520Itask_number Task #nnn terminated.HLO1521Itask_number Issuing HRECALL for log data set data_set_name.HLO1522EError open the DSNUTILB STEPLIBHLO1523IFlash copy started.HLO1524IFlash copy completed rc=return_codeHLO1525EDSNUTILB error rc=return_codeHLO1526IStart flash copy result output.HLO1527IFlash copy result output complete.HLO1578WThe number of records to sort cannot be estimated - RC=return_code.HLO1580EThe SYSINHLO DD card has invalid LRECL. LRECL must not be greater than 80.HLO1581ISQLCODE = sqlcode for accelerator accelerator_nameHLO1582EIDAA Loader does not support loading Data Gate datagate_nameHLO1583EIDAA Loader v2.1 does not support loading to version 8.x.x Accelerator <accelerator_name>HLOA001EError occurred during attempt to offload to zIIP.HLOA002ELOB header page encountered.HLOA003EEdit procedure found during zIIP processing for table tableName.HLOA004ETable versioning found for table tableName.HLOA005EA CELL64 free request failed.HLOA006EProcess halted, memory exhausted for storageArea.HLOA007EEdit proc error; name: procedureName; retcde: return_code; rescde: reasonCodeHLOA008EName/token pair could not be found.HLOA009EAn error occurred while looking up a name/token pair: IEANTRTreturnCodeHLOA010ETable not found in common storage table list: tableNameHLOA011EThe LOAD job ended before all tables were written.HLOA012EBlocking named pipe failed. Return code: return_code; reason code: reasonCode; path name: pathName.HLOA013EAn error occurred while posting across address spaces. The ASID is asidName.HLOA014EOpening named pipe failed. Return code: return_code; reason code: reasonCode; path name: pathName.HLOA015EWriting to pipe failed. Return code: return_code; reason code: reasonCode.HLOA100IStart HLOPRPG (buildLevel buildDate buildTime).HLOA101ICleanup HLOPRPG.HLOA102IProcessing page pageNameHLOA103IExpanding using dictionary for table: DBID PSID partitionNumberHLOA104IProcessing dictionary for table: DBID PSID partitionNumberHLOA105IStart HLOEDIT.HLOA106IHLOEDIT-RC4 attempting alt state.HLOA107IStart HLORERD (buildLevel buildDate buildTime).HLOA108IHLORERD zIIP cleanup error.HLOA109IPages processed=pageCount.HLOA110IStack pops=popsCount.HLOA111IPages per pop=pageCount.HLOA112IRows processed=rowCount.HLOA113IHLOPRPG page processing error.HLOA115EError occurred during error processing errorMessage.HLOA116I Exiting HLOZSCHD with RC=<error_code>.HLOA117IOpening a new pipe for tableName partitionNumber.HLOA118IClosing a pipe for tableName partitionNumber.HLOA119IEdit procedure found. Turning off zIIP.HLOA121INo zIIP available.HLOA123Elog_apply_subtask_ID Bad Writes=errorCountHLOA200ECould not obtain SSID from input parameters.HLOA201ECould not open the TABLE DD.HLOA202ETable not found in TABLE DD.HLOA203ETable owner not specified.HLOA204ETable name not specified.HLOA205ETable owner too long.HLOA206EThe name/token does not exist for the subsystem.HLOA207EForcing cleanup failed. IEANTDL rc=<return_code>.HLOA208ECould not open the JOB DD. HLOA209EJob ID not found in JOB DD.HLOA210EJob name not found in JOB DD.HLOA211ICommon storage successfully cleaned.HLOA212ISpecified table has been cleaned from storage.HLOA213ISpecified job has been cleaned from storage. HLOG8000SInternal error in API <api_context>, RC=<api_return_code>, RSN=<api_reason_code>.HLOG8001SStorage release failed. Module=<module_name>, storage area=<storage_area_name>, RC=<return_code>.HLOG8002SAddress=storage_area_address, Length=storage_area_length, SP=storage_subpool, KEY=storage_keyHLOG8003EStorage obtain failed. Module=<module_name>, storage area=<storage_area_name>, RC=<return_code>.HLOG8004ELength=storage_area_length, SP=storage_subpool, KEY=storage_keyHLOG8005EUnable to open file. DD name=dd_nameHLOG8006EUnable to dynamically allocate data set. DD name=dd_nameHLOG8007EUnable to close file. DD name=dd_nameHLOG8008ISystem=system_name, Job=job_name, Job Id=job_id, Step=step_name, Program= program_name, User=user_idHLOG8009EThe operating system or hardware do not meet minimum requirements.HLOG8010ICPU=<cpu_type>>, <cpu_model>>, <cpu_manufacturer>>. OS=<os_name>, <os_release>, <os_version>.HLOM9600EAn invalid function was supplied to utility.HLOM9601EAPI Initialization failedHLOM9602EUnable to establish session with HLOID: identifierHLOM9603EUnable to connect to DB2® system: db2_ssidHLOM9604IWorklist maintenance successful for utility id: db2_utility_id, function: maint_utility_functionHLOM9605WNo worklist data found for UTILID: db2_utility_id, function: maint_utility_functionHLOM9606EError while accessing worklist data for utility ID: db2_utility_id, function: MAINT_functionHLOM9607ESession creation failed RC=<return_code>, RSN=<reason_code>, reason=<description>.HLOM9608ESession has been terminated by the server.HLOM9609EParameter field error. Verify parameters are in the following sequence: hloid,function,ssid,utility_idHLOP9800E<!ATTLIST attribute_name> attribute 'attribute_value' has an invalid enumeration value listHLOP9801E<!ATTLIST attribute_name> attribute 'attribute_value' missing enumeration valueHLOP9802E<!ATTLIST attribute_name> attribute 'attribute_value' no closing quote for default valueHLOP9803E<!ATTLIST attribute_name> attribute 'attribute_value' enumerated type list missing '('HLOP9804E<!ATTLIST attribute_name> attribute 'attribute_value' expected quoted default valueHLOP9805EgetAttribute(missing_attribute_name) error: attribute not definedHLOP9806E'<![IGNORE[' not terminated by matching ']]>'HLOP9807E'<![INCLUDE[' not terminated by matching ']]>'HLOP9808EUnable to open default input fileHLOP9809EUnable to open DOCTYPE file 'DOCTYPE_file_name'HLOP9810EUnable to open external ENTITY file 'ENTITY_file_name'HLOP9811Eelement <element_name> ended by </element_name_1>HLOP9812EClosing tag </element_name missing '>' characterHLOP9813E<!ELEMENT element_name> is already declaredHLOP9814E<!ELEMENT element_name> expecting subelement name.HLOP9815EENTITY &entity_name; not definedHLOP9816EEnd-of-data encountered while parsing attribute value stringHLOP9817EEnd-of-data encountered in a CDATA sectionHLOP9818EEnd-of-data encountered in a commentHLOP9819EEnd-of-data encountered inside a declarationHLOP9820EEnd-of-data encountered in DOCTYPE declarationHLOP9821EEnd-of-data encountered while parsing element attributesHLOP9822EEnd-of-data encountered inside an <!ELEMENT ...> declarationHLOP9823EEnd-of-data encountered in ENTITY definitionHLOP9824EEnd-of-data encountered in processing instructionHLOP9825EInvalid <!ATTLIST attribute_name> attribute nameHLOP9826EInvalid DOCTYPE nameHLOP9827EInvalid !ELEMENT nameHLOP9828EInvalid element tagHLOP9829EInvalid name in ENTITY definitionHLOP9830EInvalid ENTITY referenceHLOP9831EInvalid value in ENTITY definition: valueHLOP9832Etypespec for <!ELEMENT element_name> not correctly endedHLOP9833E'<' character not legal in attribute value stringHLOP9834ENo attributes defined for non-element node typesHLOP9835EAttribute name not foundHLOP9836ENo closing ']' for DOCTYPE internal subset definitionHLOP9837ENo closing '>' for ENTITY definition: entity_nameHLOP9838ENo closing tag for <element_name>HLOP9839ENo '=' following attribute name 'attribute_name'HLOP9840ETag does not follow '<'HLOP9841ETag does not follow '</'HLOP9842ENo value found for attribute 'attribute_name'HLOP9843Eparameter %parameter_name; is not definedHLOP9844EUnexpected character following DOCTYPE SYSTEM nameHLOP9845EUnexpected character in <!ELEMENT element_name> childrenHLOP9846EUnexpected characters following <!ELEMENT element_name (#PCDATAHLOP9847EUnexpected characters in <!ELEMENT element_name> contentspecHLOP9848EUnexpected contentspec <!ELEMENT element_name> declarationHLOP9849EUnexpected !DOCTYPE option: optionHLOP9850EUnexpected !DOCTYPE SYSTEM valueHLOP9851EUnexpected !ENTITY SYSTEM valueHLOP9852EUnexpected text in <!ELEMENT element_name>HLOP9853EQuotation delimiters do not match for attribute value attribute_valueHLOP9854WUSE_RULESET element in POLICY references an undefined ruleset. Name: ruleset_name.HLOP9855WVRUPDATE element omitted after ACTION=VRUPDATE for DB2SYSTEM db2_ssid.HLOP9856WUsage of RULE SYNONYM has been deprecated.HLOP9857EInvalid characters encountered in PART specification.HLOP9858EUSE_PRACTICE in POLICY references an undefined practice. PRACTICE =practice_name.HLOP9859EA duplicate practice name was specified in the policy. PRACTICE=<practice_name>.HLOP9860EA duplicate utility name was specified in a practice. UTILNAME =utility_nameHLOP9861EThe length of attribute is greater than 1024 characters: ATTRIBUTE=attribute_name.HLOP9862EAttribute attribute_name_1 is incompatible with attribute attribute_name_2.HLOP9863EMultiple <USE_PRACTICE> elements were specified within one <DB2SYSTEM> element, DB2® SSID: <db2_ssid>.HLOP9864E<SUBSTITUTE> or <FAIL> attributes must be specified for <VALUE> attribute in <SYNTAX> element.HLOP9865EAttributes are not specified in <SYNTAX> element.HLOP9866E<VALUE> attribute must be specified for <SUBSTITUTE> or <FAIL> attributes in <SYNTAX> element.HLOP9867EACCEL_CURSOR, ACCEL_HLV_SSID, and ACCEL_HLV_GRPNAME are not valid on IDAA_DUAL type loads.HLOP9868EACCEL_CURSOR requires an ACCEL_HLV_SSID or ACCEL_HLV_GRPNAME. HLOP9869EAn ACCEL_CURSOR name must be provided with ACCEL_HLV_SSID or ACCEL_HLV_GRPNAME.HLOP9870 EACCEL_HLV_SSID and ACCEL_HLV_GRPNAME are mutually exclusive. Specify only one or the other.HLOP9871EThe WHEN clause is not compatible with the ACCEL_CURSOR clause.HLOP9872EThe INDDN and INCURSOR clauses are not compatible with the ACCEL_CURSOR clause.HLOP9873EField specifications cannot be provided when ACCEL_CURSOR is specified.HLOP9874EACCEL_SOURCE_DB2 requires ACCEL_CURSOR and either ACCEL_HLV_SSID or ACCEL_HLV_GRPNAME.HLOP9875EIdentifier_type value length error. The value must be 1 to maximum_name_length characters long.HLOP9876E <day_of_year> <time> ACCEL_SET_REPLICATION and ACCEL_REMOVE_AND_ADD_TABLES are mutually exclusive keywords.HLOP9878EThe keyword <keyword> is not valid as used.HLOP9879EValidation error: ID 'enum_value' not found for IDREF referenceHLOP9880EValidation error: default 'enum_value' for attribute 'attribute_name' not a member of enumerated typeHLOP9881EValidation error: <!ELEMENT ...element_name> attribute value attribute_name='enum_value' is not a member of the enumerated type.HLOP9882EValidation error: attributes declared ID must be #REQUIRED or #IMPLIEDHLOP9883EValidation error: duplicate ID ID_name='value'HLOP9884EValidation error: <!ELEMENT element_name EMPTY> cannot have subelement subelement_name.HLOP9885EValidation error: <!ELEMENT element_name EMPTY> cannot contain textHLOP9886EValidation error: <!ELEMENT element_name> invalid attribute attribute_name='value'HLOP9887EValidation error: <!ELEMENT element_name> attribute attribute_name='attribute_value' not #FIXED default value 'default_value'HLOP9888EValidation error: <!ELEMENT element_name> unexpected subelement subelement_name.HLOP9889EValidation error: <!ELEMENT element_name> missing required attribute 'required_attribute'HLOP9890EValidation error: <!ELEMENT element_name> missing required choice 'required_choice'HLOP9891EValidation error: <!ELEMENT element_name> missing required subelement subelement_name.HLOP9892EValidation error: An element can have only one attribute of type IDHLOP9893EValidation error: Element <element_name> has not been declaredHLOP9894EXML Parser Exception: file_name line=line_numberHLOP9895EXML Parser Exception occurred while processing line=line_numberHLOP9896EXML Parser ExceptionHLOP9897EAllocation error for policy control block : enum_valueHLOP9898EValue exceeds maximum length for RULE: rule_name='rule_value'HLOP9899EPolicy parser error.HLOP9900EAbnormal termination: file_name line=line_numberHLOP9901EError: Input buffer size (size bytes) is too small.HLOP9902EInvalid value specified for IGNOREFIELDS. Valid values and YES and NO.HLOP9903ERESUME YES cannot be specified for some parts and RESUME NO for others.HLOP9904EKeyword <RESUME YES> is incompatible with keyword <ACCEL_REMOVE_AND_ADD_TABLES>.HLOP9905EInvalid ACCEL_LOCKMODE value. Valid values are TABLE, TABLESET, PARTITIONS, NONE, ROW.HLOP9910I parsed_batch_syntaxHLOP9911W'parsed_batch_syntax' can only occur once. Only the last occurrence is used to process the request.HLOP9912E'batch_parameter_value' is not a recognized valueHLOP9913EValue 'user_specified_value' must be from minimum_valid_value through maximum_valid_valueHLOP9914Eparameter_value value can be at most maximum_length bytesHLOP9915EExpected value 'expected_value' not foundHLOP9916ECANCEL_THREADS request is invalid because no selection criteria is specified.HLOP9917EInitialization parameter value is unknown: parameter_name = parameter_valueHLOP9918EInitialization parameter value beyond range: parameter_name = parameter_valueHLOP9919EInitialization parameter value is too long: parameter_name can be at most parameter_max_length charactersHLOP9920EInternal parser error: parser expected the address of the control_block_nameHLOP9921WKeyword syntax_keyword is unexpected. It will be ignored.HLOP9922EInitialization parameter contains nonnumeric characters: parameter_name = parameter_value.HLOP9925EStorage obtain failed. Module=<module_name>, storage area=<storage_area_name>, RC=<return_code>.HLOP9927EAn error was detected while attempting to open the input data setHLOP9928EI/O error when reading the input data set.HLOP9929EBuffer overflow error.HLOP9930EA syntax error was detected in the field specification for the field <field_name>.HLOP9931EUnbalanced parentheses detected in an INTO-TABLE specification.HLOP9932EThe DELIMITED option is incompatible with the VALUEIF field selection criterion (START:END).HLOP9933WDATABASE keyword is ignored if database name is specified with tablespace or indexspace.HLOP9934EAn error was detected in the VALUEIF clause for field specification <field_name>.HLOP9935EAn operand of the DISCARDTO keyword is missing and must be specified.HLOP9936EAn operand of the DISCARDSPACE keyword is missing and must be specified.HLOP9937EA zero value for an operand of the DISCARDSPACE keyword was specified.HLOP9938EA value greater than the allowed maximum was specified in the DISCARDSPACE keyword.HLOP9939EKeyword PRESORT is incompatible with &VARIABLE (where &VARIABLE can be one of the following values: FORMAT UNLOAD, FORMAT SQLDS, FORMAT INTERNAL, or NO FIELD SPECS).HLOP9940EValue exceeds maximum length for PRACTICE NAME <practice_name>.HLOP9941EAttribute <attribute_name> is duplicated within a single element RULE.HLOP9942EInvalid specification for keyword <keyword>.HLOP9943EKeyword keyword1 is incompatible with keyword keyword2. HLOP9944EValue length of attribute <attribute_name> is more than <attribute_length> characters.HLOP9945WInvalid operand <operand>.HLOP9946EOnly one table can be specified for load processing when you use the option <keyword_name>.HLOP9947IPRESORT was forced due to KEYWORD <keyword_name>.HLOP9948EKeyword <keyword_name> is incompatible with keyword <keyword_name>.HLOP9949EKeyword IDAA_DUAL ON <accelerator_name> is incompatible with keyword IDAA_ONLY ON <accelerator_name>.HLOP9950EInvalid length of accelerator name.HLOP9951EKeyword <keyword_name> is not supported when loading partition level SYSRECs.HLOP9952IThe ACCEL_LOAD_TASKS value is outside the supported range of 1 - 30. Using 30 instead.HLOP9953EDiscard datasets are not supported when keyword <keyword_name> is specified.HLOP9954EField specifications are required for IDAA_DUAL and IDAA_ONLY LOADs.HLOP9955EThe value specified for ACCEL_LOAD_TASKS is invalid. HLOP9956EKeyword_name is only valid with IDAA_DUAL and IDAA_ONLY type LOADs.HLOP9957EThe value specified for ACCEL_ON_SUCCESS_ENABLE is invalid. Valid values are: YES | NO. HLOP9958EACCEL_ON_SUCCESS_ENABLE is only valid with IDAA_DUAL and IDAA_ONLY type LOAD jobs. HLOP9959EEBCDIC and UNICODE are mutually exclusive keywords.HLOP9960EThe WHEN clause and field specs cannot be specified with FORMAT INTERNAL.HLOP9961EThe HALOAD utility cannot be specified with other DB2 utilities.HLOP9962EThe HALOAD utility must specify the HALOAD utility command.HLOP9963EThe HALOAD utility must specify the <keyword> clause or keyword.HLOP9964EInvalid value specified for keyword <keyword_name>HLOP9967EInvalid delimiter value specified for FORMAT DELIMITEDHLOP9970EDiscard datasets are not supported with IDAA_ONLY and partition level SYSREC datasets.HLOP9971E<day_of_year> <time> Duplicate accelerator name '<accel name>' is specified.HLOP9972E<day_of_year> <time> The value specified for ACCEL_SET_REPLICATION is invalid. Valid values are: ON | OFF.HLOS0000IDb2® Analytics Accelerator Loader <product_version>, FMID=<product_fmid>, COMPONENT ID=<product_compid>.HLOS0001IStarted task initialization is in progressHLOS0002IStarted task initialization is completeHLOS0003IStarted task termination is in progressHLOS0004IStarted task termination is completeHLOS0007ITCB: <tcb_address> <component_name> - Component initialization is completeHLOS0009ITCB: <tcb_address> <component_name> - Component termination is completeHLOS0010ETCB: <tcb_address> <component_name> - Component initialization failed.HLOS0012STCB: <tcb_address> <component_name> received an unexpected post code. Post code=<post_code>.HLOS0013STCB: <tcb_address> <component_name> received an unexpected request code. Request code=<request_code>.HLOS0014ISVC installation is complete. SVC number = <svc_number>.HLOS0015IRemoving SVC. SVC number = <svc_number>.HLOS0016ESVC installation failed. SVC number = <svc_number>.HLOS0017SSVC removal failed. SVC number = <svc_number>, RC = <return_code>, Reason = <reason_text>.HLOS0018ESVC installation failed. SVC number=<svc_number>, RC=<return_code>, reason=<reason_text>.HLOS0019ICOMX: comx_address, COMI: comi_address, SVC EPA: svc_entry_point_address, MNTLEVEL: maintenance_levelHLOS0020ILogging has been started.HLOS0021ILogging has been terminated.HLOS0022IAuditing has been started.HLOS0023IAuditing has been terminated.HLOS0024ITracing has been started.HLOS0025ITracing has been terminated.HLOS0026E<day_of_year> <time> Primary DB2 SSID <ssid> not found in policy.HLOS0080IProduct initialization parameters: HLOS0081Iparm_name = parm_value_decHLOS0082Iparm_name = parm_value_charHLOS0083SA value for the initialization parameter 'parm_name' must be specifiedHLOS0085W'parm_name' must have a value from parm_min through parm_max. Parameter defaulted to: parm_def.HLOS0101ITCB: <tcb_address> Session created. SESS: session_token-session_number-session_type-session_job_name-session_job_ID-session_asid-session_userHLOS0103ITCB: <tcb_address> Session terminated. SESS:session_token-session_number-session_type-session_job_name-session_job_ID-session_asid-session_userHLOS0104ETCB: <tcb_address> Session: <session_token> Unicode Conversion Error. RC: <return_code> RSN: <reason_code>HLOS0200ETCB: <tcb_address> DB2® Call Attach Facility request <caf_request> failed, RC=<return_code>, RSN=<reason_code>.HLOS0201STCB: <tcb_address> A Connect-to-DB2 request was received for db2_ssid, but a connection already exists.HLOS0202ETCB: <tcb_address> db2_error_msgHLOS0203ITCB: <tcb_address> Connection to DB2® was successful. SSID=db2_ssidHLOS0204ITCB: <tcb_address> Disconnection from DB2® was successful. SSID=db2_ssidHLOS0205STCB: <tcb_address> STIMER SET failed. RC=<return_code>. Processing continues.HLOS0206STCB: <tcb_address> STIMER CANCEL failed. RC=<return_code>. Processing continues.HLOS0207ETCB: <tcb_address> DB2® Instrumentation Facility request <ifi_request> failed, RC=<return_code>, RSN=<reason_code>, SSID=<db2_ssid>.HLOS0208ITCB: <tcb_address> Session: <session_token> - CANCEL THREAD issued for thread token thread_tokenHLOS0209ETCB: <tcb_address> Connection to DB2® failed. SSID=db2_ssidHLOS0210ETCB: <tcb_address> Fatal error while processing the DB2® trace record: place_markerHLOS0211I db2_error_msgHLOS0212ITCB: <tcb_address>. Lock data returned for ace token <ace_token>.HLOS0213ITCB: <tcb_address> Session: <session_token> - CANCEL THREAD NOBACKOUT was issued for thread token thread_tokenHLOS0214EEscalated Cancel is not supported for threads executing on a remote DB2® system.HLOS0215ITCB: <tcb_address> Session: <session_token> - ESCALATED THREAD CANCEL was issued for thread token thread_tokenHLOS0216EEscalated Cancel is not supported for connection type connection_typeHLOS0217IESCALATED THREAD CANCEL was issued for thread token thread_tokenHLOS0218ICANCEL THREAD was not issued because a unit of recovery exists for token thread_tokenHLOS0219ICANCEL THREAD was not issued because unit of recovery status is unknown for token thread_tokenHLOS0220ITCB: <tcb_address> Session: <session_token> - CANCEL THREAD requested for thread token thread_tokenHLOS0221ETCB: <tcb_address> Session: <session_token> - CANCEL THREAD request failed security check for thread token thread_tokenHLOS0222ETCB: <tcb_address> Session: <session_token> - pre-cancel exit denied cancel request.HLOS0223ETCB: <tcb_address> Session: <session_token> - ESCALATED CANCEL not allowed by startup parmHLOS0224ETCB: <tcb_address> Session: <session_token> - CANCEL THREAD suppressed for HLO token thread_tokenHLOS0225ECANCEL THREAD request failed security check for thread token thread_tokenHLOS0226ECANCEL THREAD request was denied by the pre-cancel exit for token thread_tokenHLOS0227ETCB: <tcb_address> Session: <session_token> Start TRACE(<trace type>) failed on SSID: <ssid>. RC: <ifca_rc_code> RSN: <ifca_rsn_code>HLOS0228ETCB: <tcb_address> Session: <session_token> Start trace failed for get_threads requestHLOS0229ETCB: <tcb_address> Session: <session_token> Start trace failed for get_thread_detail requestHLOS0230E DB2® CAF request <db2_ssid>, <return_code>, <reason_code>.HLOS0231ETCB: <tcb_address> Session: <session_token> Start trace failed for get_objects_referenced requestHLOS0232ETCB: <tcb_address> Session: <session_token> -IP Address conversion error. RC=<return_code>, RSN=<reason_code>, *<message_continuation_number>*.HLOS0233ETCB: <tcb_address> Session: <session_token> -IP Address conversion error. RC=<return_code>, RSN=<reason_code>, *<message_continuation_number>*.HLOS0234E*<message_continuation_number>* <ip_address>.HLOS0235WTCB: tcb_address. Authorization check for DB2® system db2_ssid failed.HLOS0236ETCB: tcb_address. Authorization for primary DB2® system db2_ssid is insufficient.HLOS0237ITCB: <tcb_address>. Messages from stored procedure <stored_procedure_name>. HLOS0238ITCB: <tcb_address> MSGTEXT: <message_text>. HLOS0241E<day_of_year> <time> TCB: <tcb_address> DSNUTILB interception for DB2 SSID=<ssid> is currently primary for ID=<hloid>HLOS0242W<day_of_year> <time> Session control block validation failed. SESS:<session number> SREQ:<sreq number>HLOS0300ETCB: <tcb_address> IEAVRLS Pause Release failed, RC=<return_code>.HLOS0301ETCB:<tcb_address>. Session=<session_token>. Unable to return result.HLOS0302ETCB: <tcb_address> HLOSRSLT bad parms, Session: <session_token>, FBUF=fbuf_address, UBUF=ubuf_addressHLOS0303ITCB: <tcb_address> Failure to obtain ALET, Session:session_tokenHLOS0304ITCB: <tcb_address> STOKEN release failureHLOS0305STCB: <tcb_address> Session failed. SESS:session_token csect_name/offset_value/variable_value/variable_nameHLOS0306ETCB: <tcb_address> SQL Error occurred. Module: module_name offset_value.HLOS0307ETCB: <tcb_address> SRB Processing returned, RC=<return_code>, RSN=<reason_code>, RSN1=<extended_reason_code>.HLOS0308WTCB: <tcb_address> Unable to determine the index space name for DBID: database_id OBID: object_idHLOS0309WTCB: <tcb_address> Unable to determine the table space name for DBID: database_id OBID: object_idHLOS0310WTCB: <tcb_address> Unable to access HLOLOG tableHLOS0311WTCB: <tcb_address> Unable to access HLOAUDIT tableHLOS0400STask Manager initialization failedHLOS0401SComponent ID=component_id Component not found in the MEPL tableHLOS0402SAttach failed. Program=<program_name>, RC=<return_code>, RSN=<reason_code>.HLOS0403WTCB: <tcb_address>, Detach failed. RC=<return_code>, RSN=<reason_code>.HLOS0404STCB: <tcb_address> Subtask failed. Termination ECB: event_control_block.HLOS0405STCB: <tcb_address> Subtask unexpectedly posted init ECB. Initialization ECB: event_control_block.HLOS0406STCB: <tcb_address> Subtask failed during initialization. Termination ECB: event_control_block.HLOS0407WTask manager received an unexpected command code. Command code=<command_code>.HLOS0408SNo DB2® task started. Processing will be terminated.HLOS0409WCannot connect to the primary Db2® subsystem <db2_subsystem> as required.HLOS0410EPrimary DB2® subsystem <db2_subsystem> does not exist. Processing will be terminated.HLOS0500ITCB: <tcb_address> Session: <session_token> SSID: db2_ssid BLOCKER ID: thread_blocker_id *message_continuation_number*HLOS0501I *message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_number OLD: old_status NEW: new_statusHLOS0502I *message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_numberHLOS0503W *message_continuation_number* Object already blocked by blocker ID blocker_idHLOS0504E *message_continuation_number* The blocker ID specified was not found for delete.HLOS0505E *message_continuation_number* Thread blocker ID is already in use.HLOS0506W *message_continuation_number* (cancel_specification_number) No objects could be resolved for cancel specification.HLOS0507I *message_continuation_number* Blocker ID deleted.HLOS0508I *message_continuation_number* No objects to reset for this blocker ID.HLOS0509I *message_continuation_number* Reset status processing initiated.HLOS0510I *message_continuation_number* Thread blocker operation is thread_blocker_operationHLOS0511E *message_continuation_number* (cancel_specification_number) No objects could be resolved for cancel specification.HLOS0512E *message_continuation_number* Object already blocked by blocker ID blocker_idHLOS0513I *message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_number Object not foundHLOS0514I*message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_number OLD: old_statusHLOS0515I*message_continuation_number* Thread blocker is suppressed for DB2® system object database_name.HLOS0516W*message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_number Partition number is invalid.HLOS0517E*message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_number Partition number is invalid.HLOS0518E*message_continuation_number* (cancel_specification_number) DB: database_name SP: space_name PART: partition_number Partition number is invalid.HLOS0519IThread blocker is suppressed for Db2® Analytics Accelerator Loader configuration object DB: database_name SP: space_name.HLOS0520E *message_continuation_number* Userid user_id denied access to blocker operation by security exit.HLOS0521IThread blocker is suppressed for the DB2® object with type TEMP or WORKFILE: database_nameHLOS0600IDSNUTILB interception for DB2® SSID=DB2_ssid is enabled.HLOS0601IDSNUTILB interception for DB2® SSID=DB2_ssid is disabled.HLOS0602WDSNUTILB interception for DB2® SSID=DB2_ssid not enabled. Interception being performed by HLOID=product_id.HLOS0603WDSNUTILB interception for DB2® SSID=DB2_ssid not enabled, product cannot connect to the subsystemHLOS0604WDSNUTILB interception for DB2® SSID=DB2_ssid not enabled, DB2® subsystem is not active.HLOS0605WDSNUTILB interception for db2_ssid not enabled, insufficient authority.HLOS0606IDB2® SSID=db2_ssid has DB2® Sort enabled.HLOS0607ITCB: <tcb_address> DB2® subsystem <db2_ssid> startup detected.HLOS0608WTCB: <tcb_address>: Count of DB2® systems exceeds 256. Startup detection disabled for SSID <db2_ssid>.HLOS0609ITCB: <tcb_address> DB2® system <db2_ssid> is the primary subsystem for this instanceHLOS0610ITCB: <tcb_address> DB2 subsystem <db2_ssid> shutdown detected.HLOS0611ITCB: <tcb_address> DB2 subsystem <db2_ssid> is now running in ACCESS(MAINT) modeHLOS0612ITCB: <tcb_address> ACCESS(MAINT) cleared for DB2 subsystem <db2_ssid>HLOS0613IDb2 system <db2_ssid> <db2_ccsid_type> CCSIDs: <db2_ccsid>, <db2_ccsid>, <db2_ccsid>.HLOS0614IDb2 system <db2_ssid> is defined as MIXED.HLOS0700ITCB tcb_address SESSION REPORT message_continuation_numberHLOS0701Imessage_continuation_number SESS: Session_token Session_number Session_type Session_job_name Session_job_ID Session_asid Session_userHLOS0702Imessage_continuation_number STATUS: session_statusHLOS0703Imessage_continuation_number STARTED: session_start_timeHLOS0704Imessage_continuation_number No active sessions foundHLOS0705IROWS LOADED: number_of_rows_loadedHLOS0804WThe trace table is too small. Tracing will be disabled. Required minimum size= trace_table_minimum_size, Requested size= trace_table_requested_sizeHLOS0805WThe trace table entry is larger than the trace table. Trace table size= trace_table_size, Trace entry size= trace_table_entry_sizeHLOS0806IThe user_exit_type User Exit user_exit_name is now in use.HLOS0807SA severe error occurred while attempting to load the exit_type user exit exit_nameHLOS0808SA severe error occurred within exit_type user exit exit_name, FUNC=exit_functionHLOS0809SA severe internal error occurred preparing to drive the exit_type user exit exit_name, FUNC=exit_functionHLOS0810IThe user_exit_type User Exit user_exit_name is now inactive.HLOS0811SThe <user_exit_type> user exit <user_exit_name> FUNC=<user_exit_func> RC=12. The started task is terminating.HLOS0812IMODULE LEVEL DATE TIME EPA RREPA CC F1 F2 F3 SEQHLOS0813I<module_name>, <maintenance_level>, <assembly_date>, <assembly_time>, <entry_point_address>, <rr_entry_point_address>, <component_code>, <flag_byte_1>, <flag_byte_2>, <flag_byte_3>, <sequence_number>.HLOS0814ICommand issued: command_textHLOS0815EUnrecognized commandHLOS0816EInvalid keyword provided for command: command_nameHLOS0817Icommand_scope DSNUTILB intercept status is: dsnutilb_intercept_statusHLOS0818Ihelp_textHLOS0819ETrace table size is zero. Trace table display is not possible.HLOS0820WA display of the trace table is already in progress.HLOS0821ITrace table display is complete.HLOS0822IDB2SSID=db2_ssid DB2VER=db2_version HLOID=configuration_id DSNUTILB interception is DSNUTILB_interception_statusHLOS0823EAddress contains invalid hex digitsHLOS0824EAddress is not for an active sessionHLOS0830IDSNUTILB Intercept Policy:HLOS0831I DB2® SSID: db2_ssid ACTION: action | ACTION: VRUPDATE - SUBMIT_FROM_SERVERHLOS0832I Rule type: rule_typeHLOS0833I rule_number delimiter rule_element_type delimiter rule_element_dataHLOS0834IDSNUTILB intercept is inactive.HLOS0835IActive PRACTICE: practice_nameHLOS0836IDb2® Analytics Accelerator Loader started task practice reportHLOS0840ETCB: <tcb_address>. Error on INSERT to table SYSAUTO.UTILITYRUNS_HISTORY.HLOS0841WTCB: <tcb_address>. DB2® Autonomics Director collection disabled. BBY$NMIC bad offset to data.HLOS0898DDEBUG: Field: field_name Value: field_valueHLOS0899DDEBUG: P Len: plan_length P Name: plan_name Q Len: qual_length N Len: name_length IN1: type_1 IN2: type_2 Flag: flagHLOS0900EThe product is not APF-authorized and is terminating.HLOS0901SRVT locate or allocate operation failed.HLOS0902SDb2® Analytics Accelerator Loader started task ESTAE entered, S<system_completion_code>, U<user_completion_code>.HLOS0903SESTAE processing completedHLOS0904SStarted task subtask ESTAE entered, S<system_completion_code>, U<user_completion_code>.HLOS0905SUser exit for the started task encountered an error. A dump was created. System RC=<system_completion_code>, user RC=<user_completion_code>.HLOS0906SSVC removal failedHLOS0907SHLOGMODL Load Failed for MEPL=mepl_name.HLOS0908SHLOGMODL Load Failed for MEPL entry=mepe_name.HLOS0909SStarted task subtask ESTAE entered, system RC=<system_completion_code>, user RC=<user_completion_code>.HLOS0910EA job name conflict with a started task has been identified. The product is terminating.HLOS0911EA job name conflict with a batch job has been identified. The product is terminating.HLOS912EHLOID already in use. Terminating.HLOS0913IESTAE SDUMPX call RC=<short_system_return_code>, RS=<short_system_reason_code>.HLOS5100ITCB: <tcb_address> Session: <session_token> SSID: db2_ssid DSNUTILB utility id : utility_id *message_continuation*HLOS5101I *message_continuation_number* DSNUTILB intercept operation is DSNUTILB_intercept_operationHLOS5102I *message_continuation_number* (DSNUTILB_statement_sequence_no.) Event: DSNUTILB_event Status: DSNUTILB_event_statusHLOS5103I*<message_continuation_number>* (<DSNUTILB_statement_sequence_no.>) event=<DSNUTILB_event>, status=<DSNUTILB_event_status>, return code=<DSNUTILB_event_rc>.HLOS5104E *message_continuation_number* Unable to save worklist due to duplicate utility ID.HLOS5110IDSNUTILB intercept operation was successful.HLOS5111W *message_continuation_number* DSNUTILB intercept operation failedHLOS5112WTCB: <tcb_address> No worklist data found to delete for UTILID: db2_utility_idHLOS5113I*message_continuation_number* Worklist is in use by another utility. Owning Session: <session_token>HLOS5550ELE preinitialization service failed. Operation=<operation_name>, RC=<return_code>.HLOS9999SMessage formatter failed. Message=<message_id>, RC=<return_code>, Reason=<reason_text>.HLOT005Control file update failed.HLOU4000EStorage obtain failed. Module=<module_name>, storage area=<storage area>.HLOU4001EUnable to load module HLOUSTUB.HLOU4002EError parsing partition specification for table <table_creator.table_name>. HLOU4003E<table_name>HLOU4004ITCB: <tcb_address>. Load completed for table <table_creator.table_name>, partition <partition>. HLOU4005IHigh availability load utility execution started. HLOU4006ETCB: <tcb_address>. Error loading table <table_creator.table_name>, partition <partition>. HLOU4007ETCB: <tcb_address>. Error loading table <table_creator.table_name>, partition <partition>. HLOU4008ETCB: <tcb_address>. Unable to load <error_count> of the accelerators. Table <table_creator.table_name>, partition <partition>. HLOU4009ETCB: <tcb_address>. Invalid FILE_D_LIST_COUNT from HLPPIPE. Expected <expected_fd_count>, got PIPECNT <fd_count>. HLOU4010ETCB: <tcb_address>. Invalid file descriptor from HLPPIPE. FD <file_descriptor>. HLOU4011ITCB: <tcb_address>. Load started for table <table_creator.table_name>, partition <partition>. HLOU4012ETCB: <tcb_address>. HLPPIPE API error. Entry= <entry_number>. Function=<function_code>. RC=<return_code>.HLOU4013ETCB: <tcb_address>. HLPPIPE error parms: <error_parm1>, <error_parm2>, <error_parm3>, <error_parm4>. HLOU4014EAn error occurred on accelerator <accelerator_name>. HLOU4015IMessages from accelerator <accelerator_name>.HLOU4016EError processing table <table_creator.table_name>. HLOU4017IThe tables have been removed from accelerator <accelerator_name>.HLOU4018EUnable to remove tables from accelerator <accelerator_name>. Accelerator error messages follow.HLOU4019IMissing tables have been added to accelerator <accelerator_name>.HLOU4020EUnable to add tables to accelerator <accelerator_name>. Accelerator error messages follow.HLOU4021EInvalid use of PART keyword. The table is not partitioned.HLOU4022EThe table has been specified multiple times in the FROM TABLE clause.HLOU4023IEnabling query acceleration for tables loaded on accelerator <accelerator_name>.HLOU4024WDisabling query acceleration for tables loaded on accelerator <accelerator_name>.HLOU4025EAccelerator only tables (AOTs) cannot be loaded with the HALOAD command.HLOU4026IMulti-table specification is incompatible with replication.HLOU4027ELoad already in progress for table <creator>.<table_name> <jobname_causing_conflict> <job# causing_conflict>.HLOU4028IAccelerator <accelerator_name> will not be loaded.HLOU4029INone of the selected accelerators is available for loading.HLOU4031EHLPPIPE OPEN did not return any valid file descriptors for table partition: <partition_number>HLOU4032INone of the accelerators is accepting data. HLOU4033EThe discard data set DDNAME <ddname> is missing from the JCL. HLOU4034EDiscard record LRECL incompatible with discard DS LRECL. Record=<record_number>. HLOU4035EThe discard limit has been reached. HLOU4036INumber of records written to discard dataset=<record_count>.HLOU4050EAccelerator copy DDNAME copy_ddname is missing from the JCL. HLOU4051EAccelerator copy DDNAME copy_ddname specified for more multiple copy types.HLOU4053EDEVTYPE failed. DDNAME: copy_ddname RC: devtype_rc HLOU4054EAccelerator copy datasets must reside on tape or DASD. DDNAME: copy_ddnameHLOU4055EMultiple datasets are concatenated to Accelerator backup DDNAME: copy_ddnameHLOU4056ECOPY FUNC= copy_function failed. The copy task has terminated. HLOU4057ESystem_call failed. RC: return_code Module: calling_module DDNAME: ddname HLOU4058ECopy registration failed. RC: return_code RSN: reason_codeHLOU4059IThe following copy dataset(s) have been successfully registered:HLOU4060ECopy must be a physical sequential dataset. DDNAME: ddname DSORG: dataset_organizationHLOU4061ECopy registration check failed. RC: return_code RSN: reason_codeHLOU4062EDataset used for previous copy_type copy. DDNAME: ddname TIME: registration_timeHLOU4063ENo Accelerator copy datasets have been provided in the JCL. HLOU4064E$HLOCOPY FUNC=PUTREC failed. RC: return_code HLOU4065EKeyword <IDAA_ONLY> is required for inline copies. HLOU4066EInline copies are not supported on partial loads.HLOU4067EFunction GET_ACCEL_GROUP failed. RC=return_code, RSN=reason_code.HLOU4068I <group_name> is an accelerator group. The following members will be loaded: HLOU4069I...accelerator_nameHLOU4070ESORT ended abnormally. DSNUTILB execution bypassed due to BACKOUT YES processing.HLOU4071ENo data was loaded to the accelerator due to backout processing. HLOU4072IFetch: fetch_time Waits: wait_count Wait Time: milliseconds Recs: record_count Buffs: backup_buffers MRF: multi_row_fetch_factor HLOU4073IAccelerator Backup Utility execution started.HLOU4074INumber of rows copied=row_count HLOU4075Icopy_type: copy_dsname HLOU4076EError converting data row to DB2 internal format. Copy task terminating due to errors HLOU4077EUnsupported data type. Accelerator backup not allowed. Column=column_name, Type=column_typeHLOU4078I<day of year> <time> <accelerator>: Replication has been enabled for the table on accelerator <accel>HLOU4079E<day of year> <time> <accelerator>: Unable to set table replication on accelerator <accel>. Accelerator error messages:HLOU4080Edb2_error_msg HLOU4084E<day_of_year> <time> Memory constraint detected - available region limit value less than 100M.HLOU4088EThe Unicode Services Information Service failed. RC=<return_code> RSN=<reason_code> HLOU4089EUnsupported CCSID. Column: <column_name> CCSID: <ccsid> HLOU4090EConversion from CCSID: <source_ccsid> to CCSID: <target_ccsid> is not supported. Column: <column_name>HLOU4091WField <field_name> not convertible to column CCSID. Record=<record_number>HLOU4092WField <field_name> contains an invalid character. Record=<record_number> HLOU4093EUnicode character conversion service failed. RC=<return_code> RSN=<reason_code> HLOU4094IUnicode Character Conversion services will be used for this loadHLOU4095WNo data was loaded to the Accelerator due to rollback processing HLOU4096EUnsupported data type for FORMAT DELIMITED. Field=<field_name>, Type=<data_type> HLOU4098IOnly tables or partitions changed since the last load will be loaded.HLOU4099INo data was transferred to the accelerator. No changed tables or partitions detected. HLOU4100IPartition lists will be ignored because DETECT_DATA_CHANGES was specified.HLOU4110IHLORESET performed for utility id utilid_id HLOU4112ESYSIN CONVERSION ERROR. RC= conversion_service_rc , RSN= conversion_service_rsn, TARG=target_ccsid HLOU4114WTable: table_creator.table_name cannot be loaded because all partitions are archived.HLOU4115WUserid <username> failed UNLOAD authorization check for table <table name>.HLOU4116IAccelerator <accelerator> version: <version> sp_ver: <sp version> status: <status>HLOU4117EUtility execution failed due to SELECT authorization check.HLOU4118INo data was loaded to the accelerator because no table changes were detected or SELECT authorization errors were encountered.HLOU4120IRow estimate <count> ==> Possible some additional changes to this messageHLOU4121EAccelerator alias <accel_name> resolved to more than one accelerator.HLOU4122EFull copy not registered for table.HLOU4123I<day_of_year> <time> <accelerator>: <table_name> initial status is <current_load_status>HLOU4124I<day_of_year> <time> <table>: load bypassed, table data up to date on all accelerators.HLOU4125I<day_of_year> <time> <accelerator>: <table_name> replication set to <status>HLOU4126I<day_of_year> <time> No data was transferred to the accelerator. Replication already DISABLED for all tables.HLOU4127I<day of year> <time> No data was transferred to the accelerator. Replication already ENABLED for all tables.HLOU4128I<day of year> <time> <accelerator>: <table name> table will be loaded. Data change detected.HLOU4129I<day of year> <time> <accelerator>: <table name> table will be loaded <reason>HLOU4130E<day_of_year> <time> Accelerator replication status <status> incompatible with ACCEL_SET_REPLICATION optionHLOU4131E<day_of_year> <time> ACCEL_SET_REPLICATION not supported for V5 accelerators.HLOU4132E<day of year> <time> Error <AQT#####> occurred calling the ACCEL_SET_REPLICATION stored procedure.HLOU4133I<day of year> <time> No data was transferred to the accelerator. Stored procedure returned an error.HLOU4135I<day of year> <time> <table name> load bypassed, replication enabled on all accelerators. HLOU4136E<day of year> <time> IDAA Loader does not support loading Data Gate <data gate>HLOU5001IDb2® Analytics Accelerator Loader <product_version>, FMID=<product_fmid>, COMP_ID=<product_compid>.HLOU5002IInitialization is complete.HLOU5003IIntercept completed.HLOU5004IAnalysis started. Step=step_numberHLOU5005IAnalysis completed. RC=<return_code>.HLOU5006IThread cancel started. Step=step_numberHLOU5007IThread cancel completed. RC=<return_code>.HLOU5008IUtility execution started. Step=step_numberHLOU5009IUtility execution completed. SYS=<system_abend_code>, USR=<dsnutilb_return_code>.HLOU5010IAllow threads started. Step=step_numberHLOU5011IAllow threads completed. RC=return_codeHLOU5012IConnected to started task ID=id, JOBNAME=job_name, ASID=address_space_id, MNTLEVEL=maintenance_levelHLOU5013E<day_of_year> <time>Unable to connect to DB2® subsystem=db2_ssid, RC <return_code>, RSN <reason_code>HLOU5014IDelete blocker ID processing started. Step=step_numberHLOU5015IDelete blocker ID processing completed. RC=return_codeHLOU5016EUtility abended. SYS=system_abend_code, USR=dsnutilb_return_codeHLOU5017ESORT EXIT ERROR: error_reasonHLOU5018ISORT execution completed. SYS=system_abend_code, USR=dsnutilb_return_codeHLOU5019ESORT ended abnormally. DSNUTILB will be canceled with an S222 abend.HLOU5020ECancel syntax member cancel_syntax_member was not found.HLOU5021EGlobal syntax member global_syntax_member was not found.HLOU5022ESubtask module_name terminated unexpectedly. SYS=system_abend_code, USR=return_code.HLOU5023EUnsupported SYSREC data set type RECFM=record_format, DS SEQNO=data_set_sequence_number.HLOU5024WUnable to load the accelerator due to IDENTITY column column_name. Loading only DB2®.HLOU5025EGeneration of identity column values is not supported. Col: column_name.HLOU5026EUnable to load the client API module <module_name>.HLOU5027ENo EXEC SQL DECLARE CURSOR statement was found for ACCEL_CURSOR <cursor_name>.HLOU5028 EInvalid partitioning key definition for a table with data loader managed partitioning.HLOU5029ECALLTYPE <call_type> API call failed with RC <return_code> Server <server_name>.HLOU5030ERECV call failed. RC <return_code> SQLCODE <sql_code>.HLOU5031 EThe client did not return an SQLDA.HLOU5032EThe source and target tables must have the same number of columns.HLOU5033 EColumn <column_name> is not nullable, but Db2® Analytics Accelerator Loader Server column <column_number> is.HLOU5034EDATA TYPE <data_type> COLUMN <column_name> not compatible with SQLTYPE <sql_type>, COLNO <column_number>.HLOU5035EThe scale of COLUMN <column_name> does not match that of Db2® Analytics Accelerator Loader Server column <column_number>. HLOU5036ECOLUMN <column_name> data type <column_type> is not supported with ACCEL_CURSOR.HLOU5037EMSGTEXT <message_text>.HLOU5046EThe version of the IBM® DB2® Analytics Accelerator does not support LOAD RESUME.HLOU5047INo data was loaded to the accelerator.HLOU5048EHLOPIPE error: Function=x'10' LOOKUP_RC=<return_code>.HLOU5049EDB2® was successfully loaded but not the accelerator. Rerun this job with the option IDAA_ONLY.HLOU5050WAccelerator loaded during prior failed utility execution. Only DB2® will be loaded.HLOU5051EThe target table <table.name> is not defined in DB2®.HLOU5052EThe target table is an accelerator-only table (AOT).HLOU5053WAccelerator only tables do not support loading to both DB2 and the accelerator (option IDAA_DUAL). Changing to accelerator only load (option IDAA_ONLY).HLOU5054EUnable to delete existing data from target table. Module: <module_name> offset <offset_to_SQL_call.>.HLOU5055IExisting data deleted from target table.HLOU5056EAccelerator-only table support requires a later version of the accelerator software.HLOU5057WAccelerator accelerator_name loaded during prior failed utility execution. It will not be loaded.HLOU5058WAll available accelerators were successfully loaded during the prior failed load.HLOU5060ITCB: tcb_address E35 Xfers: transfer_count Pipe Writes: write_count Waits: wait_count CPU Time: millisecondsHLOU5061ITask: task_name CPU Time: millisecondsHLOU5062IRows loaded: number_of_rows_loadedHLOU5063EHLOSYTMP Open failed with code: 00000913HLOU5200EAPI Initialization failed.HLOU5300IProcessing will not be performed.HLOU5301IThread cancel prevented by policy.HLOU5302EUnable to rename DSNUTILB DD statements.HLOU5303EDDNAME rename operation failed for DDNAME=original DD name, new DDNAME=new DD name.HLOU5304ESWAREQ failed for DDNAME=dd_name, RC=return_code.HLOU5305EDSNUTILB returned an error parsing the SYSIN data set.HLOU5306EDSNUTILB syntax parser returned an error while parsing the SYSIN data set.HLOU5307EUnable to determine restart status.HLOU5308IUTILID in use by stopped utility but no worklist exists.HLOU5309IMove worklist failed for utility ID=utility_ID.HLOU5310IRestart was specified but no stopped utility was found for utility ID=utility_ID.HLOU5311ESave worklist failed for utility ID=utility_ID.HLOU5312EA running utility was found with utility ID=utility_ID.HLOU5313EGet next worklist step failed for utility ID=utility_ID.HLOU5314EUpdate worklist status failed for utility ID=utility_ID.HLOU5315EPhase 2 policy processing failed.HLOU5316ESET worklist step failed for utility ID=utility_ID.HLOU5317SUnable to locate USTI for current step UTILID=utility_ID, STEP=utility_step.HLOU5318ELISTDEF expansion failed for utility ID=utility_ID.HLOU5319ESave object list failed for utility ID=utility_ID.HLOU5320ESAPI processing failed, RC=return_code, RSN=reason_code.HLOU5321ESAPI processing failed, RC=return_code, RSN=reason_code.HLOU5322EListdef processing failed, RC=return_code, RSN=reason_code.HLOU5323SA usable temporary LISTDEF name could not be generated.HLOU5324EMerge worklist failed for utility ID=utility_ID.HLOU5325IRestart in progress for utility ID=utility_IDHLOU5326EOpen failed for DSN=data_set_nameHLOU5327EOpen failed. Abend code = systemCompletionCode, reason = reasonCodeHLOU5328EOpen failed. RC=return_codeHLOU5329WMember not found in data set DSN=data_set_nameHLOU5330IOriginal DSNUTILB syntax follows:HLOU5331Idsnutilb_syntaxHLOU5332IEnd of original DSNUTILB syntax listing.HLOU5333ETEMPLATE data set name processing failed, RC=return_code, RSN=reason_code.HLOU5334ETEMPLATE expansion failed for utility ID=utility_ID.HLOU5335EUFSP processing failed, RC=return_code, RSN=reason_code.HLOU5336EAn error was detected during DB2® catalog lookup of column column_name.HLOU5337EThe UFSP component detected an index column with an unsupported data type.HLOU5338ESession has been terminated by the server.HLOU5339ESession creation failed RC=return_code, RSN=reason_code, Reason=descriptionHLOU5340EWorklist in use by another utility ID=utility_IDHLOU5341EUnable to determine restart status for utility ID=utility_IDHLOU5342I-TERM UTILITY issued by user, cleaning up utility ID=utility_IDHLOU5343I-TERM UTILITY issued during utility execution for utility ID=utility_ID.HLOU5344EGet discard table ROWID failed for utility ID=utility_IDHLOU5345EUnable to dynamically allocate data set. DD name=ddname, RC=return_code, RSN=reason_code.HLOU5346ERDJFCB failed for DDNAME=ddname, RC=return_code.HLOU5347EOpen failed in ROUTINE=routine for DD name=ddname, RC=return_code.HLOU5348EATTACH failed for PROGRAM=program_name, RC=return_code.HLOU5349EIDENTIFY failed, RC=return_code.HLOU5350EThe GET_SYSTEM_INFO call failed, RC=return_code.HLOU5351SI/O Hook installation failed because no matching DB2I was found.HLOU5352SI/O Hook installation failed, RC=return_code.HLOU5353SI/O Hook removal failed, RC=return_code.HLOU5354SUnknown UOBJ type encountered, UOBJ_OBJECT_TYPE=uobj_object_type.HLOU5356WDSNUTILB syntax parser detected an empty SYSIN data set.HLOU5357ETape data set detected for DDNAME=ddnameHLOU5359EUnable to dynamically allocate SYSREC data set. RC= return_code RSN= reason_code.HLOU5360EDSN=data_set_name.HLOU5361EDEFAULTIF is not supported for partitioning key column column_name.HLOU5362ELoading a DEFINE NO table space whose data sets have not been created is not supported.HLOU5363EField column_name not found.HLOU5364IRecord <record_nbr> discarded due to WHEN clause specification.HLOU5366IRecord=<record_number> discarded due to partition key value.HLOU5367EAt least one dataset in the ACCEL_LOAD_TABLES WLM STEPLIB is not APF authorized. HLOU5400EUtility processing failed by policy practice practice_name.HLOU5401ESyntax denied: id=string.HLOU5402ESyntax required: id=string.HLOU5403IUtility statement altered by policy practice practice_name.HLOU5404EUtility monitor encountered an error RC= return_code RSN= reason_code.HLOU5405IUtility return code altered by policy practice practice_name.HLOU5406ESQL function sql_function failed with SQLCODE= sql_codeHLOU5407ISQL CREATE successful for mapping table mapping_table_name HLOU5408ISQL DROP successful for mapping table mapping_table_name HLOU5409ISQL CREATE successful for discard table discard_table_name HLOU5410ISQL DROP successful for discard table space <discard_table_space_name>.HLOU5411IGRANT INSERT successful to discard table for authid db2_authid HLOU5412WSYSREC records discarded during CONVERT_INTERNAL processing. Utility return code altered. HLOU5413WThe DB2® LOAD utility discarded one or more rows already loaded to the accelerator. HLOU5414WQuery acceleration has been disabled for table on accelerator <accelerator_name>.HLOU5415IQuery acceleration was enabled for the table on accelerator <accelerator_name>. HLOU5416WACCEL_SET_TABLES_ACCELERATION stored procedure failed. Reason: accelerator_reason_code.HLOU5417I<day_of_year> <time> Unload authorization used <authorization_method>HLOU5500ILoad pre-processing started.HLOU5501ILoad pre-processing finished with RC=return_code. HLOU5502ILoad post-processing started.HLOU5503ILoad post-processing finished with RC=return_code. HLOU5504EStorage release failed. Module=module_name, storage area=storage_area_name, RC=return_code. HLOU5505EAttempt to obtain storage failed. Module=module_name, storage area=storage_area_name, RC=return_code. HLOU5506ESQL error.HLOU5507IERRORTXT=error_text.HLOU5508EInsufficient authority to load data into table space table_space_name. HLOU5509EInsufficient authority for load with STATS into table space table_space_name. HLOU5510EOperation operation_name on data set data_set_name failed, error number =error_number_value.HLOU5511EData set operation failed. RC=return_code. HLOU5512Ierror_text. HLOU5513ECompilation of regular expression failed. Expression=expression_name. HLOU5514EMatching of regular expression failed. Expression: expression_name. HLOU5515IERRORTXT=error_text. HLOU5516IERRORTXT=error_text. HLOU5517EDynamic allocation error. DDNAME=dd_name, operation=operation_name, RC=return_code.HLOU5518EInvalid partition specified for table space table_space_name.HLOU5519EService function error. Service name=service_name, RC=return_code.HLOU5520I ERRORTXT=error_text.HLOU5521I ERRORTXT=error_text.HLOU5522EIFI error.HLOU5523IERRORTXT=error_text.HLOU5524ISome input records were discarded and IFDISCARDS PAUSE was specified.HLOU5525ISome input records were discarded, and IFDISCARDS FAIL was specified.HLOU5526IUtility was restarted after IFDISCARDS PAUSE. All valid records will be committed.HLOU5527EException with RC=return_code.HLOU5528EUnexpected exception.HLOU5529ETable space table_space_name has NPSI and was not loaded.HLOU5530ETable space table_space_name contains versioned rows and was not loaded.HLOU5531ETable space table_space_name has status space_status and cannot be loaded.HLOU5532ETable space table_space_name is VCAT-defined. VCAT-defined objects are not supported.HLOU5533ETable space table_space_name contains an XML column. XML objects are not supported.HLOU5534ETable space table_space_name contains a LOB column. LOB objects are not supported.HLOU5535IDSCOPY_LIMIT value is limit_value.HLOU5536ILoad prevalidation restart handler started.HLOU5537ILoad prevalidation restart handler finished with RC return_code.HLOU5538ITable space table_space_name is in check pending status.HLOU5539ITable space table_space_name is in check pending status.HLOU5540IIndex space index_space_name is in rebuild pending status.HLOU5541ETable space table_space_name was altered with option ROTATE PARTITION.HLOU5542EFeature is not accessible in this version of DB2®.HLOU5543EIndex space index_space_name has status space_status and its base table space cannot be loaded.HLOU5544Eerror_text.HLOU5545ITemplate data set was renamed.HLOU5546ITemplate name: template_name.HLOU5547IOld DSN: old_data_set_name.HLOU5548INew DSN: new_data_set_name.HLOU5549ERequested module module_name not found.HLOU5551IERRORTXT error_text.HLOU5700EError from call to HLOPIPE from MODNAME = module_name Function = function_code RC = return_code.HLOU5701INumber of records not loaded=<record_count>. HLOU5710EAccelerator name <accelerator_name> is not valid for DB2® SSID=<ssid> HLOU5711ETarget table for LOAD utility not defined on accelerator <accelerator_name>.HLOU5712ELOAD utility partition specification includes archived partitions.HLOU5713EIBM® DB2® Analytics Accelerator stored procedure ACCEL_GET_TABLES_DETAILS returned an error.HLOU5714ETarget table status conflict with detected LOAD status <load_status>HLOU5715EUnknown error during IBM® DB2® Analytics Accelerator validation.HLOU5716EPartial load conflict with IBM® DB2® Analytics Accelerator table status of InitialLoadPending.HLOU5717WThe selected accelerators are unavailable. Only DB2® will be loaded.HLOU5720EMSGTEXT =<message_text>.HLOU5724EThe ACCEL_LOAD_TABLES stored procedure failed.HLOU5725I MSGTEXT=<accelerator_message_text>.HLOU5726IThe table was successfully added to accelerator <accelerator_name>.HLOU5727E Unable to add table to accelerator <accelerator_name>. Accelerator error messages follow.HLOU5728I The table was successfully removed from accelerator <accelerator_name>.HLOU5729E Unable to remove the table from accelerator <accelerator_name>. Accelerator error messages follow.HLOU5730EDB2® call attachment facility error. RC=<hex_return_code> RSN=<hex_reason_code>.HLOU5731EError parsing XML document returned by <stored_procedure_name> on accelerator <accelerator_name>.HLOU5732E Unable to LOAD MODULE <module_name>. RC=<hex_return_code> RSN=<hex_reason_code.HLOU5733I DOCTEXT <xml_document_text>.HLOU5734EHLOADDTB has failed with RC=<return_code> on accelerator <accelerator_name>.HLOU5735EProcess to add tables failed due to size limit exception.HLOU5736EAccelerator <accelerator_name> will not be loaded. Accelerator state: <accelerator_state>.HLOU5738I<day of year> <time> ACCEL_LOAD_TABLES stored procedure ended on <accel>, RC=<reason code>HLOU5740EStored procedure <stored_procedure> status is STOPQUE or STOPREJ. Utility will terminate. HLOU5741IStored procedure <stored_procedure> status was STOPABN. Restart was successful.HLOU5742EStored procedure <stored_procedure> restart abended SD22 RSN 0008. HLOU5743EFull copy not registered for <creator.table_name>.HLOU5744I<day_of_year> <time> Worklist deletedHLOU5750I<day_of_year> <time> <accelerator> replication status is <status>HLOU5800WPartition discovery failed in USE15. Record = record_number. HLOU5801EColumn <column_name> DEFAULT indicator value <column_default_indicator> is not supported.HLOU5802EDefault value for column <column_name> is missing.HLOU5803EA failure has occurred in a data conversion routine.HLOU5804EUnsupported column type. COLUMN <column_name> TYPE <column_type>. HLOU5805EUnsupported row format. FORMAT <format_type>.HLOU5806EColumn <column_Name> input data is too long.HLOU5806W Column column_name data is too long. Record = record_number. HLOU5807WColumn column_name has invalid data in record record_number.HLOU5809WDB2® size limit exceeded for column column_name record record_number.HLOU5810WInput numeric invalid column column_name record record_number.HLOU5811EUnable to schedule SRB routine <srb_name>. RC=<return_code>.HLOU5812EIEAVPSE pause service failed. RC=return_code.HLOU5813ESRB routine <srb_name> initialization failed. Reason=<reason_text>.HLOU5814EIEAVXFR transfer pause service failed, RC=return_code.HLOU5815EThe SYSREC encoding scheme <encoding_scheme> does not match the table encoding scheme <encoding_scheme>.HLOU5817WInput packed decimal invalid for COLNAME <column_name>. RECORD <record_nbr>.HLOU5900EDb2® Analytics Accelerator Loader DSNUTILB exit module is not APF-authorized and is terminating.HLOU5901ERVT locate operation failedHLOU5901SRVT locate operation failed.HLOU5902SCOM locate operation failed.HLOU5903WDSNUTILF exit is inoperative for SSID: db2_ssid.HLOU5904WDb2® Analytics Accelerator Loader is not active.HLOU5905WLoad library open failed.HLOU5906WLoad failed for HLOUMAIN.HLOU5907ESYSPRINT DD is missing or unusable.HLOU5908IIBM® DB2® SORT found and will be used.HLOU5909WIBM® DB2® SORT cannot be utilized. Not all modules found.HLOU5910IDB2® Sort Program=progname returned non-zero return code, RC=rc HLOU5911IDB2® sort program program_name abended. Default sort program will be used.HLOU5912IESTAE SDUMPX call RC=return code, RS=reason code.HLOU5913ELOAD PRESORT of hash table unable to proceed due to error.HLOU5914EField length not supported for LOAD PRESORT: Column = column_name.HLOU5915EFORMAT DELIMITED is not supported for PRESORT with an ORGANIZE BY HASH table.HLOU5916EStarted task encountered an SQL error=sql_codeHLOU5917EOPEN failed for SYSPRINTHLOU5918EField specification missing for a PRESORT key.HLOU5920Econversion_service FAILED. TARGET CCSID: target_ccsid REASON: system_errno, system_err_msgHLOU5921EUNABLE TO LOCATE DECP FOR DB2 SSID db2_ssidHLOU5922EHLPPIPE LOOKUP FAILED. TABLE: table_creator.table_name, PART: partition_number, RC: return_code, RSN: reason_codeHLOU5928EMix of specified accelerator versions not supported.HLOU5929EACCEL_LOAD_TABLES was terminated due to inactivity. Accelerator table changes are ROLLED BACK.HLOU5930I<jobname> THREAD ID <nn> READ RETRY COUNTDOWN... <nnnnn>HLOU5931INo load activity detected. Timeout expired <seconds> seconds. Timeout remaining <seconds> seconds.HLOU5932IJob: <jobname> no load activity detected. Timeout expired <seconds> seconds. Timeout remaining <seconds> seconds.HLOU5933ILoad activity detected, prior timeout countdown canceled.HLOU5934EJob: <jobname> ACCEL_LOAD_TABLES on accelerator <accelerator> canceled by HLOUHMON. Reason code <n>HLOU5935EACCEL_LOAD_TABLES on accelerator <accelerator> canceled by HLOUHMON. Reason code <n>.HLOU5937INo load activity detected for the past <seconds> seconds.HLOU5938IJob: <jobname> No load activity detected for the past <n> seconds.HLOU9700IThe output saved in the Autonomics Director history table exceeds 8M and is truncated.HLOU9701IModule BBY$NMIC not found in started task STEPLIB.HLOU9702WModule BBY$NMIC does not conform to version 2, release 1 or later. HLOU9703WModule BBY$NMIC contains invalid offset to data.HLOU9704WBLDL error encountered searching for module BBY$NMIC. RSN=reason_code.HLOU9705WError encountered attempting to load module BBY$NMIC.HLV0001Udesc GETMAIN failed - increase memory size HLV0002Sparmname IS errdesc - correctionHLV0003SCODES BEGINNING WITH var1, NOT var2 SHOULD NOT BE USED TO SET THE %2 PARAMETER HLV0004Sparmname IS errdesc HLV0005Sparmname val IS errdescHLV0006SProduct not APF authorized, execution terminating HLV0007Ssubsys field IS errdesc HLV0008SProduct cannot execute in batch, execution terminating HLV0009S Execution DEQ failed - contact systems programming HLV0010Hmodname/funcode execution msgtext HLV0011WSTSI instruction failed with %1 - feedback = %2 HLV0012WCSRSI service returned RC=rcode for CPU H/W identification request - product validation may be affected.HLV0013SSSCT locate error - contact systems programming HLV0014Svar1: var2 var3 var4 var5 var6 var7 HLV0015S%PX-js subsystem subsys waiting for execution ENQ HLV0016S Execution ENQ error - contact systems programming HLV0017Svar1 PARAMETER INVALID: var2 var3 var4 var5 var6 var7 var8.HLV0018Hvar1 var2 HLV0019Ivar1 var2 HLV0020SFirst character of subsystem name must be an alphabetic character (A-Z). HLV0021SABEND ERROR abcode REASON rsncode AT modname+offset HLV0022SSecond 2 characters of subsystem name must be prodID.HLV0023S Subsystem name must be four (4) characters long HLV0024SLast character of subsystem name must be alphanumeric HLV0025S%PM not prepared for execution by feature code HLV0026Sss not configured for this CPU var1, execution terminating.HLV0027SMVS/370 not supported HLV0028SProduct code pcode is invalid.HLV0029SConfiguration issue detected; ss not configured for CPU var1, execution continues HLV0030S%PM will require configuration update in <x> days HLV0031E%PM will require configuration update in <x> days.HLV0032S%PM configuration problem, execution terminating.HLV0033SCONFIGURATION FROM 'var2' PARAM. DOES NOT SUPPORT EXECUTION OF THIS PRODUCT - TERMINATING.HLV0034SPM feature code feature not configured. HLV0035Ssubsys requires configuration update, execution continues. HLV0036Sservice OF desc FAILED, RC=rcode, DETECTED AT addrHLV0037Erout errdesc FAILED, RC=rcode, DETECTED AT addr, %SK HLV0038Sservice OF desc FAILED, RC=rcode, REASON=rsncode, DETECTED AT addr, %SK HLV0039Srout errdesc FAILED, ABEND=abcode, REASON CODE=rsncode HLV0040Scblk CONTROL BLOCK AT addr msgtext HLV0042I%PX ver/lvl initializing on processor cpuID.model.modelno.manuf PCCAcount flag.HLV0043Hmsgtext HLV0044Serrdesc FREEMAIN FAILED HLV0045STask or exit modname can not be executed HLV0046W Initialization procedure procedure or IRXJCL ended with condition code rcode - processing continues HLV0047I DATASPACE procedure CREATED TIME = t2 BY %PM HLV0048EDSPSERV ERROR. RETURN CODE = rcode. t2 %PM HLV0049I Dataspace added to PASN list. t2 %PM HLV0050Wvar1 configuration requires an update, certain features will need modification, execution continuing.HLV0053SConfiguration issue: processor model number (modelno) does not match configured model; execution continues.HLV0054Hvar1 Configuration installed until var2 (var3 parameter).HLV0055Ecsect not found within %PM primary load module HLV0056EInvalid data found in csect loaded at addr ivdata HLV0057Wvar1 rejected for use - var2 var3.HLV0058Wvar1 refresh required in var2 days.HLV0059SConfiguration issue: H/W processor ID var1 mismatched configuration for var2 of past var3 hours.HLV0060TLATCH SET CREATED: LS-NAME=lsname LATCHES=lcount LS-TOKEN=lstoken additinfoHLV0061ELATCH ERROR: reqtype errdesc additinfoHLV0062TLATCH operation: LSTOKEN=lstoken LATCHNO=latchno LTOKEN=lstoken RQSTR=reqID additinfoHLV0063Sz/OS® Version must be at 1.13 or higher. Execution terminating. HLV0064TInterval summary operation. SMLH at addr1 SMLG at addr2. Tag: additinfo HLV0065TInterval summary %1: %2 HLV0066SLogon of the address space user ID userID failed. Detected at addr. HLV0067SLOGON of the SSLUSERID, userID, failed. Detected at addr. HLV0068TLogon of user ID userID failed. HLV0069WThe severity level of message cannot be changed. HLV0080EControl block cblk could not be located HLV0081EUnknown host operating system - prodname HLV0082Icount1 online CPs and count2 online zIIPs detected HLV0083ILPAR lpar. CEC MSUs: cap1. LPAR MSUs: cap2. Current® avg. var HLV0084IDecimal float support ind available on this processor HLV0090I TSOSRVACTIVE(YES) INVALID IN PROB STATE - SIMULATED USING TMP IN CURRENT A/S HLV0091Eservice OF desc FAILED, RC=rcodeHLV0092ECANCEL of server jobname (ASID=asid) failed HLV0093IWaiting for TSO server termination to complete HLV0094Sservice OF desc FAILED, RC=rcodeHLV0095SMAIN TASK TIMED OUT WHILE WAITING TO BE POSTED BY THE TSO/SRV SUBTASK HLV0096STSO/SRV ABEND abcode OCCURRED AT modname+offset DURING desc HLV0097Iservice OF desc FAILED, RC=rcodeHLV0101S%PM PRODUCT USAGE EXCEEDS SPECIAL CONFIGURATION LIMITS: var1HLV0102SEXCESS USAGE - LOCATIONS: var1, DRIVER TYPES: var2, HOST BUSINESS SYSTEMS: var3 HLV0103HAccess restricted to TCP/IP - LU 6.2 support not activated HLV0104HNo usage parameter specified. Usage specific to basic administrative functions and SIS. HLV0105ITEST DATE var1 (var2) FOR CONFIGURATION, D-O-C(var3 var4), var5 HLV0106SVersion 7 Configuration required, contact Software Support.HLV0107SServer parameter required, contact Software Support.HLV0110H INITIALIZATON OF QUICKREF INTERFACE FAILED, VERIFY QUICKREF DSN AND INSTALL STATUS HLV0111SInvalid DB2® subsystem ID subsys set by LOGDB2SUBSYS parameter HLV0112SInvalid default DB2® subsystem subsys set by DEFAULTDB2SUBSYS parameter HLV0113WDEFAULT DB2® SUBSYSTEM ID (subsys) FROM DSNHDECP IS INVALID, CONTINUING HLV0114WDB2® logging will not be activated - requires valid default DB2® subsystem ID HLV0115ELE/370 INTERFACE MODULE CEEPIPI CANNOT BE LOADED - IT IS REQUIRED FOR SSL SUPPORT HLV0116WDB2® logging cannot be activated when DB2® SUBSYS default is 'NONE', logging deactivated HLV0117Stype TCP/IP port number is invalid - type TCP/IP processing terminated HLV0118SLoad balancing not available - VCF feature code is required. HLV0119WLogging not available - DB2 feature code is required.HLV0120ISEF msgtextHLV0121WSEF - service OF desc FAILED, RC=rcodeHLV0122SABEND abcode REASON rsn OCCURRED AT modname+offset DURING SEF descHLV0123TSEF initialization complete HLV0126Sservice OF desc FAILED, RC=rcodeHLV0127SMAIN TASK TIMED OUT WHILE WAITING TO BE POSTED BY THE subtask SUBTASK HLV0128SDynamic definition of ddname library failed HLV0130H Initializing secur release rel security environment HLV0131SsubsysID SSCT chain scanning error HLV0132WNo security package found HLV0133Erelno release unknown, release code is relno HLV0134WRUNAUTH USERID cache initialization failed - sharing of RUNAUTH USERIDs now disabled HLV0135WSecurity routine failed attempting to validate the LOGUSERID userID. RC=rcode.HLV0136W LOGUSERID (userid) LOGON FAILED rcode1 rcode2 rsncode - msgtextHLV0137SABEND abcode REASON rsn OCCURRED AT modname+offset DURING SOM desc.HLV0138WSOM facility is not available for pkg. Processing continues. HLV0139WDynamic service services are not available HLV0140IThe following catch-up rules require a final catch-up disposition HLV0141Irule.rsname1, rule.rsname2 … rule.rsname7HLV0142RReply 'YES' to catch-up all rules, 'NO' to bypasscatch-up, or 'MANUAL' for rule by rule prompting HLV0143RReply 'YES' to catch-up rsname.rulename rule or 'NO' to bypasscatch-up HLV0144EInvalid catch-up manual reply: reply HLV0145ECatch-up reply wait exceeded 2 minutes. Default used HLV0146E3 Invalid catch-up replies. Default taken HLV0147ECatch-up service service for variable varname failed, RC=rcode.HLV0148WCatch-up rule rsname.rulename has changed. Catch-up bypassed.HLV0149ECatch-up rule rule global variable write failed, RC=rcodeHLV0150Sservice OF desc FAILED, RC=rcodeHLV0151Sservice OF dsname FAILED, RC=rcode, REASON CODE=rsncodeHLV0152Sservice OF dsname FAILED, ABEND=abcode, REASON CODE=rsncode HLV0153Hddname data set not allocated HLV0154SAny existing Trace Browse data discarded HLV0155SPlease standby - upgrading Trace Browse - all data retained HLV0156Sservice PASSED desc - code HLV0160SPossible shortage of storage, bytes bytes required for Trace Browse HLV0161SMain task timed out while waiting to be posted by the TRACE subtask HLV0162Sservice OF dsname FAILED, ABEND=abcode AT modname+offset, REASON CODE=rsncodeHLV0165ISEF msgtext HLV0166EUnable to build process block for SEF interface, RC=rcodeHLV0167ERuleset rule specifies DSN dsname, should be dsname for VirtualDirectory dir. HLV0171Sservice OF dsname FAILED, RC=rcode, REASON CODE=rsncode HLV0172Sservice OF dsname FAILED, ABEND=abcode, REASON CODE=rsncodeHLV0173Wddname data set not allocated HLV0174SAny existing global variables data discarded HLV0175IGlobal variable upgrade vartext HLV0176S Duplicate global variable found, name=varname HLV0177SMain task timed out while waiting to be posted by the global variable checkpoint subtask HLV0178Serrdesc DETECTED IN GLOBAL VARIABLE LIST HLV0179IGlobal variable conversion from version vartext version HLV0180IGLOBAL VARIABLE CHAIN REBUILD vartext, count GLOBALS HLV0181Ivarname BEING ADDED TO CHAIN HLV0182IGLOBAL VARIABLE DATABASE BEING CONVERTED HLV0183SABEND abcode OCCURRED AT modname+offset DURING descHLV0184Sdesc storaddr1 storaddr2 storaddr3 HLV0185W GLOBALMAX VALUE OF val1 IS TOO LOW. RESET TO val2.HLV0186S CONVERSION FAILED. INCREASE GLOBALMAX BY AT LEAST minval. HLV0187IOLD IN-USE BLOCK COUNT - minval. NEW IN-USE BLOCK COUNT - val. HLV0188S INCOMPATIBLE SYSCHK1 DATABASE LEVEL lvl, CANNOT BE USED. HLV0190ESEF STARTUP ERROR: var1, var2 ... var9HLV0191WSWI FACILITY WARNING: var1, var2 ... var9 HLV0192ISWI FACILITY: var1, var2 ... var9 HLV0193W SEFACTIVE = "NO" set - SEF rules will not be enabled during start-up .HLV0194WSEF start-up procedure ended with special RC (8) - auto-enable of SEF rules bypassed - no SEF rules are enabled.HLV0195EXO DATASET ERROR: var1, var2 ... var9 HLV0196WSEF CONFIGURATION UPDATE var1, var2 ... var9 HLV0197SCritical SEF resource definition error found - server startup aborting HLV0200SMODE SWITCH ROUTINE service FAILED RC=rcodeHLV0201SSSVT service FAILED RC=rcodeHLV0202SSAST UDPATE FAILED RC=rcodeHLV0203SSAST PLIST STORAGE service FAILED RC=rcodeHLV0204WTotal subsystem count was count1, reset to count2 HLV0206Eservrout errdesc FAILED, RC=rcode, DETECTED AT addrHLV0207IJSAST TABLE ENTRY FOR subsys WAS indicator FOUND - FORCEJSASTUPDATE OPTION ACTIVE HLV0220ICONNECT TO REAL-TIME SMF INTERFACE SUCCESSFUL FOR stream_nameHLV0221ECONNECT OF SMF REAL-TIME INTERFACE FAILED FOR STREAM stream_name, RC=return_code, REASON=reason_code, DETECTED AT csect_nameHLV0230WSERVER'S DFHSM PENDING HRECALL TABLE IS FULL - DFHSMDRAIN(YES) FORCED HLV0231EDFHSM INIT/TERM ROUTINE, OPINHS, ENTERED WITH INVALID FUNCTION CODE: code HLV0233E IBM-SUPPLIED DFHSM LOAD MODULE, ARCGIVER, NOT INSTALLED/LOCATED - DFHSM SUPPORT DISABLED HLV0234EDFHSM INTERFACE DISABLED DUE TO STORAGE ALLOCATION ERROR HLV0235IDFHSM support interface successfully initialized HLV0236EABEND DURING DFHSM service PROCESSING - CMP=ccode,RS=rsncode, AT=modname+offset HLV0237WHRECALL PENDING FOR dsname - MWE ECB AT addr UNPOSTED - ORPHANED HLV0238ISERVER'S PENDING RECALL TABLE NO LONGER FULL - DFHSMDRAIN(NO) RESET TO NO HLV0239ISHUTDOWN SUSPENDING FOR UP TO sec SECONDS TO AWAIT count1 PENDING HRECALL COMPLETIONS - count2 HLV0240Ecount PENDING DFHSM REQUESTS (AND MWE's) ORPHANED BECAUSE rsnHLV0250Sservice OF desc FAILED, RC=rcodeHLV0251Sservice PASSED desc - code HLV0253Sservice TO desc FAILED, RC=rcodeHLV0254SIMS™ rsrc name missing HLV0255HBuild in-storage profile failed for class class rcode1 rcode2 rsncode - errmsg HLV0261IServer will use default filetype definitions for MIME CONTENT-TYPE mapping HLV0265EIDMS support cannot be enabled - module IDMS-module-name not foundHLV0270TAccess to ACI feature is not configured.HLV0271WACI internal service had to GETMAIN buffers HLV0272Iservice errdesc, RC=rcode, RSN=rsncode, DETECTED AT addr HLV0273Tadditinfo1, additinfo2 … additinfo9HLV0280SSSL msgtextHLV0281SSSL KEY/CERTIFICATE FILE func ERROR, DD=ddname, RC=rcodeHLV0282SABEND abcode OCCURRED AT modname+offset DURING SSL descHLV0283TSSL initialization complete HLV0284SSSL user ID userID logon failed.HLV0285ISSL manager user ID userID logged on to server. HLV0286Sservice OF desc FAILED, RC=rcodeHLV0287SMAIN TASK TIMED OUT WHILE WAITING TO BE POSTED BY THE subtask SUBTASK HLV0288SSSL SERVER PRIVATE KEY/CERTIFICATE FORMAT INVALID FOR ddnameHLV0289SSSL SUPPORT CANNOT BE ENABLED - DDNAME ddname IS NOT ALLOCATED HLV0290SSSL ERROR: msgtextHLV0291SSSL LDAP indicator NOT SPECIFIED HLV0292IGSK SSL SUPPORT CANNOT BE ENABLED - SSLKEYPATH PARAMETER NOT SPECIFIED, CHANGING TO SSLEAY SUPPORT HLV0293IA CALL TO THE SET_DUB_DEFAULT UNIX™ SYSTEM SERVICE FAILED. RC=rcode RS=rsncode HLV0320S Subroutine subrout was found in modname1 but belongs in modname2 at offset offsetHLV0321S Subroutine subrout at offset offset1 in module modname is out of sequence and should be offset offset2HLV0322SVector and list table offsets for subroutine subrout in module modname do not match HLV0323SVector at offset offset in module modname points to subrout1 but should point to subrout2HLV0324Iservice OF desc FAILED, RC=rcode, REASON=rsncode, DETECTED AT addrHLV0325Iservice OF desc SUCCEEDED, DETECTED AT addrHLV0326Tadditinfo1, additinfo2 ... additinfo3, PGM=%SK HLV0334ISTOP command detected during initialization HLV0335SESTAE service ERROR RC=rcodeHLV0336Sservice of desc failed, RC=rcode. Detected at addr. stack: stkinfo.HLV0337Edesc service ERROR RC=rcodeHLV0338SINVALID desc LOCATED AT addr TAG IS tag HLV0339Ecount process block(s) still in use HLV0340ImsgtextHLV0341T%PM feature codes are not set - contact Software Support for assistance HLV0342T%PM is running on an unconfigured CPU.HLV0343T%PM configuration will need refresh in x days.HLV0344T%PM configuration needs refresh on this system.HLV0345SDD allocation required in start-up JCL for proper execution of TSO/E REXX procedures. HLV0346I NETWORKBUFFERSIZE value inadequate for SQLMAXCOLUMNS value, raised to val HLV0347IDSNREXX DB2® REXX INTERFACE NOT FOUND, ADDRESS DSNREXX SUPPORT NOT ACTIVATED HLV0348SInvalid registry block ivdata found in logstream logstream HLV0349Iregtype REGISTRY LOGSTREAM logstream action HLV0350Sservice OF desc FAILED, RC=rcodeHLV0351Sservice PASSED desc - code HLV0352Wmodname is not REENTRANT HLV0353Sservice TO desc FAILED, RC=rcodeHLV0354SCICS® rsrc NAME MISSING HLV0355ICICS® support terminating HLV0356ICICS® support activated HLV0357IEXCI support terminating HLV0358IEXCI support activated HLV0359Tmsgtext HLV0360SNo matching CONNECTION name rsrc for DEFINE SESSION HLV0361I%1 of %2 sessions connected to %3 HLV0362INo active session to %1HLV0363T Acquisition of session to %1 failed HLV0364ISDCITRU IS STARTED AND ENABLED HLV0371Efunc ROUTINE ERROR - error additinfo1, additinfo2 ... additinfo7 HLV0372ECSQCAPX %1HLV0373ESDAITRUE %1HLV0380TABEND IN REXXTOOLS DYNALLOC INTERCEPT CMP=ccode, RS=rsncode, SVC-99-PLIST=addr HLV0381TADD REXX VARIABLE NAME FAILED WITH RETURN CODE rcode, REASON CODE rsncode FOR NAME varname HLV0388IIt contains additional diagnostic information about the failure.HLV0388EDYNAMIC LPA reqtype SERVICE FAILED FOR modname. RETURN CODE=rcode. REASON CODE=rsncode. HLV0389EDYNAMIC LPA reqtype FUNCTION=func RC=rcode RS=rsncode HLV0390E NAMED-TOKEN service SERVICE ERROR: RC=rcode FOR LVL=tlvl, NAME=tname, DATA=tdata, POPT=topt HLV0391Efunc ROUTINE ERROR: error additinfo1, additinfo2 ... additinfo7HLV0392Wfunc ROUTINE WARNING: error additinfo1, additinfo2 … additinfo7 HLV0393SServices PARM parmname additinfo1, additnfo2 ... additinfo7 HLV0394SSERVICES MAILBOX CONTROL rout FAILED: HASN=asid1, PASN=asid2, SASN=asid3, MODE=mode, RC=rcode, CALLER=csect, LT=ltype HLV0395ESERVICES MAILBOX REQUEST reqtype ABEND ccode (rsncode) AT modname+offset additinfo1 additinfo2 additinfo3 additinfo4 HLV0396TSERVICES MAILBOX INVALID POINTER (addr/ALET/storlgth) DURING PKM AUTH CHECK - ABEND ccode (rsncode) HLV0397Tfunc ROUTINE ERROR: error additinfo1, additinfo2 … additinfo7HLV0398Tfunc ROUTINE WARNING: error additinfo1 additinfo2 … additinfo7 HLV0399TServices E-O-T cleanup for TCB addr RC=rcode RS/CC=rsncode/ccode FDBK=feeback1, feedback2 … feedback5HLV0400Sservice OF desc FAILED, RC=rcode HLV0401Sservice PASSED desc - codeHLV0402Sservice TO desc FAILED, RC=rcodeHLV0403SRRS rsrc NAME MISSING HLV0404IRRS support terminating HLV0405IRRS support activated HLV0406Hmsgtext HLV0407EFailure trying to register with RRS HLV0408EERROR SETTING RRS EXITS, CHECK RRS STATUS HLV0409ERRS %1 EXIT MANAGER UNAVAILABLE HLV0410EProduct RRS exits have been unset HLV0411ETRANS: token FROM host - REQUESTED ind1 BUT WAS HEURISTICALLY ind2 HLV0413ETHE DB2ATTACHFACILITY PARAMETER IS NOT SET TO RRSAF, RRS SUPPORT TERMINATED' HLV0414ERRS RECOVERY TABLE SIZE EXCEEDED - TRANSACTION ABORTED' HLV0415E Incompatible supplied driver on client system - transaction aborted HLV0416EZERO COLUMNS RETURNED FROM PREPARE - ERROR IN SYSTEM HLV0417ERRS IS NOT ACTIVATED FOR THIS SERVER - XA TRANSACTION ABORTED.' HLV0420E TWO-PHASE COMMIT SUPPORT WAS REQUESTED, BUT RRS IS NOT ACTIVE HLV0421EERROR IN TWO-PHASE indicator PROCESS. RRS RETURN CODE = rcodeHLV0422ERRS RECOVERY TABLE COUNT NEGATIVE, RESET TO ZERO HLV0423TAccess to data sources through Enterprise Transactions is not configured. HLV0424E TWO-PHASE COMMIT SUPPORT WAS REQUESTED, BUT THE RRS MANAGER WAS NOT ACTIVE HLV0425E IBM/MQSERIES/RRS SUPPORT ENTRY entry IN MODULE modname MISSING HLV0426S IBM/MQSERIES/RRS SUPPORT MODULE modname MISSING - NO TWO-PHASE COMMIT SUPPORT PROVIDED HLV0428TCREATION OF RRS PRIVATE CONTEXT FAILED - CONNECTION TERMINATED. CALL: calltype - R15: rcode - R0: rsncode HLV0480SMQSERIES support deactivated - access routines cannot be loaded.HLV0500E IBM-assigned CSR table entry setup error, contains val, not product OPVN pointer HLV0501Eservice OF desc FAILED, RC=rcodeHLV0502Esubsys directory table entry exists.HLV0503ENo ERLY exists for DB2® %1 HLV0504E%1 DB2® owned by another server.HLV0505E%1 DB2® search error.HLV0506E%1 server software PC reset failed.HLV0507E%1 product PC reset failed.HLV0508E%1 server software PC entry unknown.HLV0509E%1 DB2® server init error.HLV0510E%1 DB2® server %2 error.HLV0511E%1 DB2® SSCTSUSE ERROR,HLV0512I%1 DB2® main task PC reset error.HLV0513I%1 product main task TERM PC error HLV0515EMAXIMUM NUMBER OF DB2® SUBSYSTEMS PREVIOUSLY DEFINED. MAX = %1. DEFINE FOR DB2® SSID %2 IGNORED. HLV0516E DUPLICATE DB2® SUBSYSTEM DEFINITION FOR DB2® SSID %1 HLV0517ERETURN CODE %1 FROM ALESERV ADD OF DB2® DBM1 FOR %2 HLV0518E TERMINATION WAITING ON DB2® STATUS TASK FOR %1 HLV0519Emaximum number of server address spaces are already active. max possible %1. currently active %2.HLV0520EMaximum number of DB2® systems are all ready active. max possible %1. DB2® %3. HLV0521SDB2® subsysid STATUS TASK ABEND abcode AT modname+offset DURING desc.HLV0522WProprietary R&&D utilities are activated for this start-up HLV0523WE/SQA ROUTINE AT addr WILL BE REBUILT DUE TO INVALID PTR OR DATA HLV0600SIMS/OTMA XCF reqtype FAILED, RC=rcode RS=rsncode IMS=imsIDHLV0601Sservice OF desc FAILED, RC=rcodeHLV0602IIMS/OTMA server waiting OTMA INIT for IMS™ SSID=subsys HLV0603IIMS/OTMA server INIT in progress for IMS™ SSID=subsysIDHLV0604IIMS/OTMA server INIT complete for IMS™ SSID=imsID using XCF member xcfIDHLV0605IIMS/OTMA server has detected OTMA TERM for IMS™ SSID=subsysIDHLV0606IIMS/OTMA server TERM in progress for IMS™ SSID=subsysIDHLV0607IIMS/OTMA server TERM complete for IMS™ SSID=subsysIDHLV0608SIMS/OTMA TPIPE TASK task FOR CONNECTION conn ABENDED CODE abcodeHLV0620SSIS/XCF XCF reqtype FAILED, RC=rcode RS=rsncode SIS=ID HLV0621Sservice OF desc FAILED, RC=rcodeHLV0622TSIS/XCF member waiting SIS/XCF %1 INIT for mbr=%2 HLV0623ISIS/XCF %1 INIT in progress for member=%2HLV0624ISIS/XCF server INIT complete for SIS SSID=sisID using XCF member xcfIDHLV0625ISIS/XCF %1 instance has detected termination of %2 instance member %3 HLV0626ISIS/XCF %1 TERM in progress for member=%2 HLV0627ISIS/XCF %1 TERM complete for member=%2 HLV0701W ZIIPCLASS=class HAS TOO MANY PERIODS SPECIFIED HLV0702WCLASS class1 SPECIFIES A ZIPCLASS NAME THAT DOES NOT EXIST, class2 HLV0703W ZIIPCLASS=class CONTAINS INVALID PARMS HLV0704HWLM refresh command completed HLV0706Iproduct subsys requires the following elements missing from WLM Service type name HLV0707IType: PEtype, Server Parameter: PEname, Value: parmname HLV0708RReply 'GO' to update the WLM Service Definition, or 'CANCEL' to terminate server initialization HLV0709IWLM Service Definition def has been updated with required product elements HLV0710EInvalid reply: reply. Reply 'GO' or 'CANCEL' HLV0711EREPLY WAIT EXCEEDED 2 MINUTES. CANCEL ASSUMED HLV0712E3 INVALID REPLIES. CANCEL ASSUMED HLV0713SWLM administration user ID userID logon failed.HLV0714IWLM administration userid userID logged on to system HLV0715IWLM Service Definition definition does not contain current Service Policy policy HLV0716REnter name of Service Policy to activate, 'LIST', or 'CANCEL' to terminate server initialization HLV0717IThe following Service Policies are available for activation HLV0718IPolicy: policyname - policydesc HLV0719RReply 'GO' to activate Policy %1, or 'CANCEL' to terminate server initialization HLV0720SWLM reset to service class class failed for job jobname subsystem subsys ASID asid HLV0721IWLM classify successful for transaction - Service Class class HLV0722IUnable to classify transaction trans for subsystem subsysHLV0723IWLM enclave create successful for Service Class class HLV0724Isubsys WLM health changed from subsystem%% to oper1%% oper2 HLV0725IRACF administration USERID userID logged on to system HLV0726SRACF administration USERID (userID) logon failed HLV0800IIDMS SERVER INIT IN PROGRESS FOR CONNECTION=%1 HLV0801IIDMS SERVER INIT COMPLETE FOR CONNECTION=target USING MAILBOX=connID HLV0802I CONNECTION BROKEN WITH IDMS CONNECTION=connID USING MAILBOX=jobname HLV0900Eservice of ddname/cblk failed, RC=rcode.HLV0901ECANNOT OPEN member (ABEND abcode AT modname+offset) HLV0902ECannot find program program ddname.HLV0903EERROR 43 reqtype caller, LINE lineno: ROUTINE routine NOT FOUND HLV0906INo syntax errors found during scan.HLV0907SABEND abcode OCCURRED AT csect+offset OF PROGRAM program HLV0908EPROGRAM program IS TOO LARGE - INPUT BUFFER OVERFLOW HLV0909EPROGRAM program - ARG LENGTH (lgth) EXCEEDS MAXIMUM LENGTH (maxlgth) HLV0911EMissing REXX program name HLV0912EMissing REXX program name detected at - addr HLV0913EInvalid REXX program name detected - program HLV0914EUNKNOWN RETURN CODE FROM PARSE ROUTINE, RC=rcode HLV0915EBATCH OR TSO CALL PARAMETER STRING TOO LONG HLV0916Eroutine built-in function not found - called by caller. HLV0917EERROR SAVING THE COMPILED OUTPUT IN %1 HLV0918ECANNOT WRITE EXECUTABLE OBJECT obj.obj2 TO DS(dsname) additinfoHLV0919ISuccessful compile and save of program in ddname.HLV0920EREBUILD FAILED FOR COMPILED REXX PROGRAM - program HLV0921W ALLOCATION OF COMPILED LIBRARY (dsname) FAILED HLV0922WITRACE KEYWORD NOT ALLOWED DURING COMPILE ONLY REQUEST HLV0923SCOMPILE ALL FAILED - ERROR READING THE DIRECTORY OF dsnameHLV0990ERUNNING program: INCOMPATIBLE CONTROL BLOCKS HLV0991ERUNNING program: INTERNAL ERROR DETECTED AT addrHLV0997Tlineno TRACE MESSAG HLV0998ERUNNING program LINE lineno: COMPILER WORK SPACE OVERFLOW (value1 value2) HLV0999ESTAX calltype MACRO FAILED - RC=rcodeHLV1000Imsgtext HLV1004IERROR 4 process program, LINE lineno: PROGRAM INTERRUPTED HLV1005IERROR 5 process program, LINE lineno: MACHINE RESOURCES EXHAUSTED HLV1006IERROR 6 var1 var2, LINE lineno: UNMATCHED "/*" OR QUOTE HLV1007IERROR 7 process program, LINE lineno: WHEN OR OTHERWISE EXPECTED HLV1008IERROR 8 process program, LINE lineno: UNEXPECTED THEN OR ELSE HLV1009IERROR 9 process program, LINE lineno: UNEXPECTED WHEN OR OTHERWISE HLV1010IERROR 10 process program, LINE lineno: UNEXPECTED OR UNMATCHED END HLV1011IERROR 11 process program, LINE lineno: CONTROL STACK FULL HLV1012IERROR 12 process program, LINE lineno: CLAUSE TOO LONG HLV1013IERROR 13 process program, LINE lineno: INVALID CHARACTER IN PROGRAM HLV1014IERROR 14 process program, LINE lineno: INCOMPLETE DO/SELECT/IF HLV1015IERROR 15 process program, LINE lineno: INVALID HEXADECIMAL OR BINARY CONSTANT HLV1016IERROR 16 process program, LINE lineno: LABEL NOT FOUND HLV1017IERROR 17 process program, LINE lineno: UNEXPECTED PROCEDURE HLV1018IERROR 18 process program, LINE lineno: THEN EXPECTED HLV1019IERROR 19 process program, LINE lineno: STRING OR SYMBOL EXPECTED HLV1020IERROR 20 process program, LINE lineno: SYMBOL EXPECTED HLV1021IERROR 21 process program, LINE lineno: INVALID DATA ON END OF CLAUSE HLV1022IERROR 22 process program, LINE lineno: INVALID CHARACTER STRING HLV1024IERROR 24 process program, LINE lineno: INVALID TRACE REQUEST HLV1025IERROR 25 process program, LINE lineno: INVALID SUB-KEYWORD FOUND HLV1026IERROR 26 process program, LINE lineno: INVALID WHOLE NUMBER HLV1027IERROR 27 process program, LINE lineno: INVALID DO SYNTAX HLV1028IERROR 28 process program, LINE lineno: INVALID LEAVE OR ITERATE HLV1029IERROR 29 process program, LINE lineno: ENVIRONMENT NAME IS TOO LONG HLV1030IERROR 30 process program, LINE lineno: NAME OR STRING TOO LONG HLV1031IERROR 31 process program, LINE lineno: NAME STARTS WITH NUMBER OR "." HLV1033IERROR 33 process program, LINE lineno: INVALID EXPRESSION RESULT HLV1034IERROR 34 process program, LINE lineno: LOGICAL VALUE NOT 0 OR 1 HLV1035IERROR 35 process program, LINE lineno: INVALID EXPRESSION HLV1036IERROR 36 process program, LINE lineno: UNMATCHED "(" IN EXPRESSION HLV1037IERROR 37 process program, LINE lineno: UNEXPECTED "," OR ")" HLV1038IERROR 38 process program, LINE lineno: INVALID TEMPLATE OR PATTERN HLV1039IERROR 39 process program, LINE lineno: EVALUATION STACK OVERFLOW HLV1040IERROR 40 process program, LINE lineno: INCORRECT CALL TO ROUTINE HLV1041IERROR 41 process program, LINE lineno: BAD ARITHMETIC CONVERSION HLV1042IERROR 42 process program, LINE lineno: ARITHMETIC OVERFLOW/UNDERFLOW HLV1043IERROR 43 process program, LINE lineno: ROUTINE NOT FOUND HLV1044IERROR 44 process program, LINE lineno: FUNCTION DID NOT RETURN DATA HLV1045IERROR 45 process program, LINE lineno: NO DATA SPECIFIED IN FUNCTION RETURN HLV1046IERROR 46 process program, LINE lineno: INVALID VARIABLE REFERENCE HLV1048IERROR 48 process program, LINE lineno: FAILURE IN SYSTEM SERVICE HLV1049IERROR 49 process program, LINE lineno: INTERPRETATION ERROR HLV1064IERROR 64 process program, LINE lineno: UNIMPLEMENTED FEATURE HLV1066IERROR 66 process program, LINE lineno: AMPERSAND VARIABLES UNSUPPORTED HLV1067IERROR 67 process program, LINE lineno: DUPLICATE LABEL HLV1068IERROR 68 process program, LINE lineno: FUNCTION NAME > 32 CHARACTERS HLV1069IERROR 69 process program, LINE lineno: FUNCTION HAS TOO FEW ARGUMENTS HLV1070IERROR 70 process program, LINE lineno: FUNCTION HAS TOO MANY ARGUMENTS HLV1071IERROR 71 process program, LINE lineno: CODE VERSION IS DOWN LEVEL HLV1072IERROR 72 process program, LINE lineno: FUNCTION RETURNED UNASSIGNED STEM DATA HLV1073IERROR 73 process program, LINE lineno: RECORD REFERENCE EXCEEDS VARIABLE VALUE HLV1074IERROR 74 process program, LINE lineno: MAX STATEMENT COUNT HLV1075IERROR 75 process program, LINE lineno: ELSE NEEDS SEMICOLON HLV1076IERROR 76 process program, LINE lineno: VARIABLE VALUE TOO LONG HLV1077IERROR 77 process program, LINE lineno: CODE AREA FULL HLV1080IERROR 80 process program, LINE lineno: PULL FOUND EMPTY QUEUE HLV1081IERROR 80 process program, LINE lineno: NOT SUPPORTED WITHIN INTERPRET HLV1082IERROR 82 process program, LINE lineno: ARRAY BOUNDARY EXCEEDED HLV1083IERROR 83 process program, LINE lineno: CODE BLOCK TOO LARGE, EVAL STACK FULL HLV1084IERROR 84 process program, LINE lineno: TOO MANY SYMBOLS, SYMBOL TABLE FULL HLV1085IERROR 85 process program, LINE lineno: INVALID USE OF EXTENDED VARIABLE TYPE HLV1086IERROR 86 process program, LINE lineno: INVALID GLOBAL SYMBOL HLV1087IERROR 87 process program, LINE lineno: INVALID INTERNAL OBJECT HLV1088IERROR 88 process program, LINE lineno: INTERPRETER STACK ERROR HLV1090I var1 var2 var3 var4 var5 var6 var7 var8 var9 var1 0var11 HLV1091IERROR 91 process program, LINE lineno: INVALID OR MISPLACED OPTIONS STATEMENT HLV1092IERROR 92 process program, LINE lineno: OVER maxno CLAUSES EXECUTED IN RECOVERY EXIT HLV1093EERROR 93 process program, LINE lineno: GLOBAL VARIABLE WORKSPACE OVERFLOW (parmval - wrkspc) HLV1094EERROR 94 process program, LINE lineno: OVER sec SECONDS USED FOR EXECUTION HLV1095EERROR 95 process program, LINE lineno: OVER maxno HOST COMMANDS ISSUED HLV1096EERROR 96 process program, LINE lineno: OVER maxno "SAY" CLAUSES EXECUTED HLV1097EERROR 97 process program, LINE lineno: OVER maxno CLAUSES EXECUTED HLV1098Ilineno TRACE MESSAG HLV1099Istatement HLV1100SRETRY LIMIT CONVERSION ERROR - VALUE SPECIFIED = val HLV1101STEST LEVEL CONVERSION ERROR - VALUE SPECIFIED = val HLV1102Ssubsys NOT VALID SUBSYSTEM ID, COMMAND TERMINATED HLV1104S Subsystem subsys is not a valid DB2® subsystem HLV1105SLOAD FOR DSNECP00 FAILURE HLV1106Ssubsys NOT OPERATIONAL, RETRY COUNT ZERO HLV1110S CONNECTION FAILURE RC = rcode REASON = rsncode HLV1112S DISCONNECT FAILURE RC = rcode REASON = rsncodeHLV1113SCOMMAND REJECTED - cmd CMD NOT SUPPORTED UNDER DSN HLV1114Rmsgtext HLV1115SERROR ISSUING SUBCOMMAND PROMPT - RC = rcodeHLV1117SCOMMAND BUFFER SCAN ERROR - RC = rcodeHLV1118SRUN SUBCOMMANDS CAN NOT HAVE A PROGRAM PARAMETER AND A CP PARAMETER HLV1119SRUN SUBCOMMAND REQUIRES (1)PROGRAM PARAMETER OR (2)PLAN AND CP PARAMETER HLV1120SDSNRLI func FUNCTION FAILED. RC = rcode REASON = rsncodeHLV1121IPLEASE WAIT...CONNECTION RETRY IN PROGRESS HLV1122ICOMMAND SPUFI IGNORED, VALID ISPF ENVIRONMENT MUST EXIST HLV1123SCOMMAND REJECTED, CMD NOT SUPPORTED UNDER DSN HLV1126SPLAN OPEN FAILURE RC = rcode REASON = rsncodeHLV1127SPLAN CLOSE FAILURE RC = rcode REASON = rsncodeHLV1129RENTER TSO COMMAND HLV1130SERROR ISSUING TSO COMMAND PROMPT - RC = rcodeHLV1131Scmd NOT VALID COMMAND HLV1132Scmd ENDED DUE TO ERROR HLV1133SMODULE program NOT FOUND HLV1134SUNABLE TO ESTABLISH THE STAX EXIT HLV1135SUNABLE TO TERMINATE THE STAX EXIT HLV1136SSTAX EXIT INTERNAL LOGIC ERROR HLV1137SERROR EXECUTING TSO COMMAND RC = rcode REASON = rsncodeHLV1138I SET_CLIENT_ID CALL FAILED - DB2® NOT AT PROPER MAINTENANCE LEVEL OR RELEASE. SUBSYSTEM: subsysHLV1154SCOMMAND BUFFER INTERNAL FORMAT ERROR HLV1163SCOMMAND BUFFER PARSE ERROR - RC = rcodeHLV1250Ivar1 var2HLV1251TTHE VALUE OF THE parmname PARAMETER WAS ROUNDED UP TO parmval BYTES HLV1252TTHE VALUE SPECIFIED FOR THE parmname PARAMETER WAS CHANGED FROM parmval1 TO parmval2HLV1253TTHE VALUE OF ROLLBACKPOSITIVERC WAS CHANGED TO 'NO' BECAUSE IGNOREPOSITIVESC WAS SET TO 'YES' HLV1254TTHE VALUE OF ROLLBACKPOSITIVERC CANNOT BE CHANGED TO 'YES' BECAUSE IGNOREPOSTIVESC IS 'YES' HLV1255Eparmname - cannot be changed after initialization HLV1256Eparmname - cannot be changed HLV1257Eparmname - cannot be displayed HLV1258Edesc - errmsg suffix HLV1259E PARAMETER parmname POINTS TO UNINITIALIZED ENUMERATED VALUE IN cblk AT addrHLV1262Igrpdesc grpname HLV1263E prefix-parmval-suffix HLV1264WNo parameter value information is available.HLV1265WWARNING: parmname PARAMETER (val) CONTAINS TOO FEW QUALIFIERS TO ENSURE PROPER HTTP COOKIE OPERATION HLV1266WWARNING: parmname PARAMETER (val) MAY CAUSE INCONSISTENT OPERATION USING HTTP COOKIES HLV1275SABEND abcode IN AUTHORIZATION ROUTINE modname+offset HLV1277Scblk Control block not found HLV1281Eservice desc FAILED, RC=rcode, DETECTED AT addr HLV1290Hjb parmname parmval HLV1291WWarning: parmname is an obsolete parameter HLV1292EExit code ecode is invalid for parmname HLV1293Eerrdesc HLV1294Edesc OF process FOR PARAMETER CHANGE EVENT NOTIFICATION FAILED WITH RC=rcodeHLV1295WPARM parmname AND ANY DEFINE ISPFCONCAT ARE MUTUALLY EXCLUSIVE. parmname WILL BE IGNORED. HLV1296TSecurity optimization processing terminated HLV1297TLogging processing terminated HLV1298TInterval recording %1HLV1299TInterval recording terminated HLV1340Iechotext HLV1346EMESSAGE ID AND TEXT ARE TOO LONG HLV1348ENO WTOR REPLY RECEIVED - TIMER EXPIRED HLV1349ITHE MESSAGE IDENTIFICATION NUMBER IS wtoID HLV1364Ssysserv RETURN CODE = rcodeHLV1370Hjobname rcode desccode mcscno time msgID msgtext HLV1400STSO/E is not installed HLV1401Sservice CMD(modname) FAILED, RC=rcodeHLV1402SDialog Manager service service error, RC=rcodeHLV1404SABEND OCCURRED PROCESSING SUBROUTINE subrout IN MODULE modnameHLV1405TABEND OCCURRED PROCESSING SUBROUTINE subrout IN MODULE modname HLV1406STHE ENTRY FOR SUBROUTINE subrout IN MODULE modname POINTS TO SUBROUTINE subrout HLV1407TTHE ENTRY FOR SUBROUTINE subrout IN MODULE modname POINTS TO SUBROUTINE subroutHLV1420Sservice OF DIRECTED LOAD LIBRARY (ddname) FAILED RC=rcodeHLV1421Einfotext COMMAND infotext HLV1423Eerrmsg HLV1424ECURRENT cmd COMMAND NOT AUTHORIZED - errdesc HLV1440WISPF LOADLIB at level lvl, but Server LOADLIB at level lvl. Processing continues. HLV1441SABEND abcode IN AUTHORIZATION ROUTINE modname+offset HLV1442SCOMMAND BUFFER PARSE RC=rcodeHLV1443SCOMMAND BUFFER INTERNAL FORMAT ERROR HLV1444Sparmname PARAMETER reqval SPECIFIED WITH ARCHTYPE(parmval) HLV1445SSYSTEM MANAGER SERVICE service ERROR, RC=rcodeHLV1446SISPF service service error, return code = rcodeHLV1447EMember member not found HLV1448Efunc failed for member=member RC=rcodeHLV1449EISPF LOADLIB at version version1, Server LOADLIB at version2, please correct inconsistency HLV1450Hjobname subsysID HLV1451Hjobname subsysID ARCHIVE REVIEW dsnameHLV1452SABEND abcode REASON rsn OCCURRED IN modname+offset HLV1453Sservice OF desc FAILED, RC=rcode, DETECTED AT addr HLV1454Sservrout errdesc FAILED, ABEND=abcode, REASON CODE=rsncodeHLV1455S Subsystem subsys not active HLV1456SISPF service service error, return code = rcode. Unable to start ISPF dialog. HLV1457W Subsystem subsys not active HLV1600EModule DSNACAF not properly linked HLV1601EProduct is not active at this time HLV1602EProduct failed while SQL application program executing HLV1603EModule DSNTIAR not properly linked HLV1700Eservice desc FAILED, RC=rcode, DETECTED AT addr HLV1701EERROR CODE queue SENDING MESSAGE TO %2 QUEUE HLV1720Edesc func FAILED, RC=rcode, DETECTED AT addrHLV1740TInvoking IEFSSREQ for SSI function funcode - codedesc HLV1741TIEFSSREQ SSI return code is rcode HLV1742TSSOBRETN FUNCTION-SPECIFIC RETURN CODE IS rcode HLV1743TWAITING FOR NEW SYSOUT FILES FOR sec SECONDS HLV1744TWAIT TIMELIMIT EXPIRED - END-OF-DATA FOR SYSOUT HLV1745TNEW SYSOUT FILE NOW AVAILABLE HLV1746TIRXEXCOM action REQUEST FOR varname FAILED WITH RC/SHVRET=rcode/SHVRETval HLV1747TADDRESS SPOOL ENCOUNTERED ABEND CC=ccode, RS=rsncode AT modname+offset, PSW=psw, RETRY BY addrHLV1748TABEND CC=ccode, RS=rsncode AT modname+offset, PSW=psw, ACCESSING dsect STRCT AT addr, RETRY BY addrHLV1749TSSI ABEND CC=ccode, RS=rsncode AT modname+offset, PSW=psw, RETRY BY addr HLV1750TDDNAME ddname ALLOCATED TO SYSOUT FILE dsname HLV1751TDDNAME ddname DEALLOCATED HLV1752TSPOOL HCE ERROR(rcode/rsncode): rsndesc HLV1753TSPOOL HCE SECONDARY ERRORrcode/rsncode: rsndescHLV1754TSPOOL CLEANUP ABEND CC=ccode, RS=rsncode AT modname+offset, PSW=psw, action, RETRY RTNE AT addrHLV1755TSPOOL HCE MSGrcode/rsncode: rsndesc HLV1840Eerrdesc HLV1841Eerrdesc, RC=rcodeHLV1842Eerrdesc1 ddname errdesc2 HLV1843Eddname io FAILED, RC=rcode, DETECTED AT addrHLV2020Sdsname FAILURE RC=rcodeHLV2021Sdesc CANNOT USE SUBSYS FILE ALLOCATIONS HLV2022SUNKNOWN SUBSYS OPEN ENVIRONMENT ASID asid HLV2023SNo server block found for USERID=jobname HLV2026SInvalid subsystem file count count found for server jobname HLV2027SSUBSYS req cblk VALIDATION ERROR - ADDRESS addr HLV2030SABEND abcode IN USER EXIT modname+offset HLV2031WTSO SERVER (procedure) - SYSTSIN BLKSIZE = blksize, USE maxblksize HLV2032T SUBSYSTEM DATA req (reqcode) PROCESSED FOR DDNAME ddname - RC=rcodeHLV2040TSRP RABND: SRVR NOT RESPONDING - ASID=asid ASCB=ascb TCB=tcb HLV2041TSRP SFREE: RQSTR CANNOT BE POSTED - CODE=pcode - ASID=asid TCB=tcb CNID=cnid TOKEN=token SMAF=addr HLV2042TSRP RBIND: RC=rcode CMTC=addr BEFORE=word1 AFTER=word2 TB=tb HLV2043TSRP RWAIT process: CMTC=addr BEFORE=word HLV2044TSRP RWAIT: RC=rcode CMTC=addr BEFORE=word1 AFTER=word2 TB=tb HLV2045TSRP RVOKE process: CMTC=addr BEFORE=word HLV2046TSRP RVOKE: RC=rcode CMTC=addr BEFORE=word1 AFTER=word2 TB=tb HLV2047TSRP RABND: RC=rcode CMTC=addr BEFORE=word1 AFTER=word2 TB=tb HLV2048TSRP SBIND: RC=rcode SERVER=svraddr RQSTR=reaaddr TB=tb HLV2049TSRP SFREE: RC=rcode SERVER=svraddr RQSTR=reqaddr TB=tb HLV2050TSRP SPOST: RC=rcode CODE=pcode SERVER=svraddr RQSTR=reqaddr TB=tb HLV2082Sss PRODUCT FAILURE DETECTED HLV2083Wss OUTBOARD TSO SERVER jobname,ASID=asid FAILED HLV2084Eservice operand FAILED, RC=rcode, DETECTED AT addrHLV2101SuserID init FAILED - macro RC=rcodeHLV2102Ereqtype REQUEST FOR userID FAILED - failrsn HLV2103SuserID rcode FAILED - RACF® CODES rsncode text HLV2104EuserID init FAILED - failrsn HLV2106HuserID init FOR conID AT t2 ON d2 HLV2107HLOGON FAILED FOR userID. rcode1 rcode2 rsncode - errtext. HLV2108Eerrmsg1 errmsg2 FAILED - RC=rcodeHLV2120IMEMBER member - additinfo HLV2121Sio FAILED, RC=rcode, MEMBER=member, DDNAME=ddname, DSNAME=dsname HLV2122IMEMBER member RECORD recno LENGTH lgth IS INVALID HLV2200Eservice desc FAILED RC=rcode, DETECTED AT addrHLV2300ENLS SERVICE ROUTINE (OPTRTB) ABEND abcode, RS=rsncode AT modname+offsetHLV2301INLS INVOKED WITH INVALID FUNCTION CODE funcode HLV2302INO VALID MAPPING FOR src CODEPOINT srccp TO output - SUBSTITUTING subcp HLV2303IUNEVEN BYTES IN PURE DBCS STRING - byte FOUND IN TRAILING POSITION - DISCARDED HLV2304INO TRAILING SHIFT-IN DELIMITER BEFORE END OF DBCS STRING - ASSUME SHIFT-IN WAS PRESENT HLV2305IINVALID ENCODING PARAMETER (parmname) DETECTED IN NLS E-TO-A ENCODING ROUTINE HLV2306I DESTRUCTIVE OVERLAP DETECTED IN SBCS E-TO-A OR A-TO-EENCODING ROUTINE HLV2307INO NLS TABLE FOUND FOR ASCII/EBCDIC MAPPING CODE tblname HLV2308INO BUILT-IN NLS TABLE FOUND FOR scheme (tblname) HLV2309IUNPAIRED scheme DBCS LEAD-BYTE byte SKIPPED BY DECODER HLV2310I UNSUPPORTED ESCAPE SEQUENCE seq FOR meth HLV2311IUTF-8 ind NOT SUPPORTED FOR NLS page - ASSUMING HOST CODE PAGE IS "ENU" HLV2312IBYTE byte IS AN INVALID UTF-8 BYTE - SKIPPING TO NEXT BYTE OF STREAM HLV2320TDBCS conversion bypassed for parameter parmno: rsn HLV2401Edb2ID conntype func ERROR, RC=rcode REASON=rsncode HLV2402Edb2ID : msgtext HLV2403Econntype module mismatch for DB2® subsystem db2ID HLV2404EUser ID userID does not have authority to access DB2® db2ID HLV2405EDB2® system db2ID not defined HLV2406Tdb2ID conntype ISSUED, RC=rcode REASON=rsncode HLV2407TPUBLISH SOURCE db2ID USERID userID LOGON FAILED rcode1 rcode2 rsncodeHLV2408EStreams plan plan not defined TO db2IDHLV2409Isrctype %2 Streams source task now starting HLV2410IStreams destination task for destination starting HLV2411WPUBLISH - service OF desc FAILED, RC=rcodeHLV2412IStreams tasktype task for destination terminating HLV2413Tdata1 data2 data3 data4 data5 data6 data7 data8 data9 %SK HLV2414WUNABLE TO FIND DATASET NAME FOR DDNAME ddname HLV2415ECANNOT SERIALIZE ON db2ID QUALIFIER qualifier HLV2416SStreams support not configured - it cannot be initialized HLV2417EInvalid return from Streams rule rulename rval HLV2418TPUBLISH ITEM keyfield FOR SOURCE srcID - errtext - STATUS=scode RC=rcode REASON=rsncode DIAG=diaginfo- FAILED HLV2419TPUBLISH DESTINATION dest FAILURE errtext - STATUS=scode RC=rcode REASON=rsncode DIAG=diaginfo - WILL RETRY HLV2420EDB2® db2ID CONTENTION ON table CODE -sqlcode - WILL RETRY LATER HLV2421E DUPLICATE PUBLISH OF pkgdest (HTX) TO destination IGNORED HLV2422EMACHINE machID (index) IS USING UNKNOWN PROTOCOL protocol HLV2423EMACHINE machID (index) DOES NOT HAVE A SAVED URL HLV2424EMACHINE machID (index) INVALID URL errcode - detailed HLV2425E WORKTABLE UPDATE FOR keyfield destination FAILED - ROW NO LONGER EXISTS HLV2426EMACHINE machID (index) DOES NOT HAVE A SAVED MQ NAME HLV2427ETask task not started - not licensed for feature.HLV2428Etask SOURCE TASK PARAMETER MQREPLYQNAME mqreplyqname IGNORED - NOT LICENSED FOR USE HLV2429E NON-REPORT MQ MESSAGE RECEIVED ON mqreplyqname (start) - IGNORED HLV2430Esource MQSERIES MQ FAILURE ON mqreplyqname RC=rcode REASON=rsncode - errdesc HLV2431Ijobname Streams exit exit enabled HLV2432E UNRECOGNIZED MQ REPORT MESSAGE RECEIVED ON mqreplyqname (corrID) HLV2433EEVENT DEFINITION BUILD FAILED FOR source event datamap HLV2434Wtskname tsktype DB2® EVENT TABLE ROWNUM percent FULL HLV2436Sjobname error inquiring CICS® system information for Streams - EIBRESP: respcodeHLV2437Sjobname error enabling Streams exit program program for exit exit - EIBRESP: respcodeHLV2438Sjobname error extracting GWA address for Streams program program - EIBRESP: respcodeHLV2439IVSAM capture not enabled, already being processed by subsystem subsys HLV2440IVSAM event capture enabled HLV2441EError in enabling VSAM event capture, RC=rcode HLV2443TVSAM caller is in key callers and only key 8 callers are supported, VSAM capture terminated. HLV2444EVSAM capture prefix not set, VSAM capture not enabled HLV2445Sjobname error operation Streams exit program program - EIBRESP: respcodeHLV2446Ijobname enabling Streams exit program program for exit exit HLV2447Ijobname operation Streams exit program program HLV2448Ijobname Streams exit program program operation HLV2449IUnable to create capture file file, RC = rcode1, REC = rsncode, SSIRC = rcode2 HLV2450IUnable to allocate capture file file, RC = rcode, REC = rsncode HLV2451IUnable to open capture file file, RC = rcode HLV2452ICapture file file is not SMS managed, but SMS is required for the capture file HLV2453SStreams work file not allocated - Streams source task terminated HLV2454Etskname tsktype TASK NOT STARTED - MQSERIES NOT ACTIVE HLV2455Etskname tsktype filetype FILE, NAME filename VERSION MISMATCH, EXPECTED verno1, FOUND verno2 HLV2456Wtskname tsktype WORK FILE, DDNAME ddname percent FULL HLV2457Etskname tsktype WORK FILE, DSNAME dsname COMPLETELY FULL HLV2458ESOURCE NAME tskname NOT ACTIVE OR NOT FOUND HLV2459EUNICODE CONVERSION for tblname FROM source TO target NOT SUPPORTED HLV2460ETHE ZEVRAW SPECIFICATION ON EVENT DEFINITION src def REQUIRES THE RAW DATA OPTION HLV2461SError loading Streams program - program HLV2462EEVENT DATA TOO LONG FOR source event datamap HLV2463EDATA CAPTURE CHANGES NOT DEFINED FOR event tblqual tblname HLV2464EMONITOR2 and TRACE Authority are required for user ID userID.HLV2465IStreams native VSAM capture not enabled HLV2466Wtskname tsktype WORK FILE, DDNAME ddname EXTENDED, NOW percent FULL HLV2467EMORE THAN ONE EVENT TABLE CANNOT BE ACTIVE FOR SOURCE tskname. ALL ACTIVE EVENT TABLES FOLLOW. HLV2468EStreams source tskname, event table table in map map marked active. HLV2469EStreams source tskname, event table table in map map, cannot find map map. HLV2470SStreams IMS™ source task srcname not activated - RRS not enabled HLV2471SStreams IMS™ source task srcname not activated - EVENTQ not defined HLV2472Iroutine Capture successful/failed rcode rsncode HLV2473Iroutine text1 text2 text3 text4 HLV2474Iroutine text1 text2 text3 text4HLV2475Iroutine Blocksize:maxsize Blocklen:length Blockid:blkIDHLV2476Iroutine Streamtoken: token HLV2477Iroutine text1 text2 text3 text4 HLV2478Etskname tsktype TASK NOT STARTED - STRNO val TOO SMALL HLV2479Sjobname ERROR OBTAINING CONTAINER DATA FOR container - EIBRESP: respcodeHLV2480IStreams server version ver1 does not match DB2® function version ver2 HLV2481Ijobname Streams version ver SFVXno date time HLV2482T RENDEZVOUS CALL FAILED - RC=rcode1 REAS=rsncode - ENCLAVE RC=rcode2 FEEDBACK=(fbcodes) HLV2483TStreams parmname parameter not specified HLV2484Tjobname Streams Name/Token operation result for token HLV2485IStreams DB2® FUNCTION VERSION ver date time HLV2486IStreams source improper version ver found ver HLV2487TPUBLISH LOGON FAILED - errmsg HLV2488RREPLY 'GO' TO CONTINUE, OR 'CANCEL' TO TERMINATE Streams Initialization HLV2489EInvalid Streams initialization reply: replyHLV2490EStreams reply wait exceeded 2 minutes. Default used HLV2491E3 Invalid Streams replies. Default taken HLV2492IStreams not active on this server HLV2493EStreams TASK task UNABLE TO operation LOGSTREAM logstream, RC=rcode, RSN=rsncodeHLV2494WINVALID RECORD FOUND IN task LOGSTREAM logstream, FOUND STATUS scode, TO dest. KEY timestamp HLV2495WTASK task LOG logstream MISSING REPLY, STATUS scode, DEST. dest., KEY timestamp HLV2496WTASK task LOG logstream RECORD WITH STATUS statcode, DEST. dest., KEY timestamp, CONFIRMATION ARRIVED, RECORD MISSING HLV2497W Logstream operation exp HLV2498TStreams does not support Tibco Rendezvous destinations HLV2499TStreams does not support Oracle destinations HLV2500Tsource COPYWORK time1 time2HLV2501Tsource RUNRULES HLV2502Tsource DYNDEST keyfield machID index HLV2503Tdest SENDPLUP-RESTART HLV2504Tsource MQMARK HLV2505Tsource SENDITEM dest keyfield HLV2506Tsource DOPRUNE time count HLV2507Tsource WAITABIT caller sec SECONDS HLV2508Tsource PREPROC dest keyfield urID HLV2509Tsource PREPROC **SKIP** keyfield HLV2510Tsource POSTPROC dest keyfield rcode urID HLV2520T ENABLETRANSMISSIONS dest machineHLV2521T DISABLETRANSMISSIONS dest machine HLV2530T ADDCOLUMN colname colval HLV2531TADDTOPIC topic HLV2540Tsrctsk capture EVENT CAPTURE datatype operation mapname HLV2541Tsrctsk capture EVENT BUILD datatype operation mapname HLV2542Tsrctsk capture EVENT POST datatype operation mapname HLV2543Tsrctsk capture EVENT BACKOUT datatype operation mapname HLV2544Wsource CATALOG SEARCH ERROR, RC=rcode REASON=rsncode ID=modID TYPE=type, ENTRY=entry HLV2545EInvalid Streams service request received HLV2600TABEND ccode RS=rsncode OCCURRED AT modname+offset. FUNCTION CODE=funcode. HLV2606ESecurity optimization processing is terminated HLV2607ISecurity server ENF signal 71 not available HLV2608WSOM RACF® new password exit is not installed HLV2620ISecurity optimizer entry for user ID userID was expired.HLV2621ISecurity optimization is not active HLV2622IUser ID userID was not located by the security optimizer.HLV2623ISecurity optimizer processing abended HLV2700EError bb-ccc ddd Processing request. Extra Information: eeeHLV3000Trecovery LEVEL lvl errdesc=abcode REASON CODE=rsncode TIME=time SEQ=seqno CPU=cpuID ASID=asid HLV3001Sfunc errdesc, ABEND abcode AT modname+offset HLV3002TData at PSW PSWdata HLV3005SESTAE level lvl ESTAE func error RC=rcodeHLV3006TPSW at time of error fPSW ILC ilc INTC intc HLV3007TCurrent® routine name=modname address=addr offset=offset HLV3008Tind register HLV3009Tmodname calltype modname+offsetHLV3010TToo many entries HLV3020SINVALID STRING ADDRESS addr1, DETECTED addr2HLV3021SINVALID STRING LENGTH maxlgth, DETECTED addrHLV3022S TOKENIZATION LOGIC ERROR, DETECTED addr HLV3030Eservrout errdesc FAILED, RC=rcode, DETECTED AT addrHLV3031EABEND abcode IN servrout, REASON CODE=rsncode, CALLED BY cs HLV3032TINVALID INPUT COMMUNICATION BUFFER PREFIX READ - blksize HLV3033T DATASPACE CREATED, NAME=dspname, CALLED BY cs HLV3034T DATASPACE DELETED, NAME=dspname, CALLED BY cs HLV3035T DATASPACE EXTENDED, NAME=dspname, CALLED BY cs HLV3036T DATASPACE RELEASED, NAME=dspname, CALLED BY cs HLV3037T DATASPACE func FAILED, NAME=dspname, RETURN CODE=rcode, REASON CODE = rsncode,CALLED BY cs HLV3038TALET CREATED, NAME=dspname, ALET=alet, CALLED BY cs HLV3039TALET DELETED, NAME=dspname, ALET=alet, CALLED BY cs HLV3040TALESERV func FAILED, NAME=dspname, RETURN CODE=rcode, REASON CODE = rsncode,CALLED BY cs HLV3041TABEND abcode IN servrout, REASON CODE=rsncode, NAME=dspname, ALET=alet, CALLED BY cs HLV3042SModule modname is not AMODE(31) HLV3043SMODULE modname LOAD FAILED, ABEND=abcode, REASON CODE=rsncodeHLV3044SMODULE modname DELETE FAILED, RETURN CODE=rcodeHLV3060SINVALID PC FUNCTION CODE funcode, DETECTED AT addrHLV3061Eservice ABEND abcode AT modname+offset HLV3062Eservice desc FAILED RC=rcode, DETECTED AT addrHLV3063Eplist action FAILED, DETECTED AT addrHLV3070Sfunc (funcode) SERVICE errdesc ccode rsncode errloc modname+offset creg15 HLV3071Tfunc (funcode) SERVICE errdesc ccode rsncode errloc modname+offset creg15 HLV3080Eoperation FAILED FOR userID RC=rcode AT addrHLV3081TTSO SERVER IN ASID asid traceinfo1 traceinfo2 traceinfo3 traceinfo4 HLV3082WOUTPUT LIMIT EXCEEDED (limit LINES) - CANCEL SELF WITH S722 HLV3083SCommand requested more input - command aborted HLV3084Wservice OF desc FAILED, RC=rcodeHLV3085Hjobname A=asid1 (asid2) TSO server terminated by request HLV3086HLOGON of userID to TSO server failed - RC=rcode1 (rcode2) Reason=rsncodeHLV3087H Requestor has revoked command request - cancel self with S622 HLV3100SInvalid text insertion address - msgno addr modname+offset HLV3101SMessage number msgno not found - modname+offset HLV3102SInvalid message text variable - msgno varname modname+offset HLV3103SInvalid text insertion data length - msgno modname+offset HLV3104SInvalid text insertion data type - msgno modname+offset HLV3105SOutput message buffer overflow - msgno modname+offset HLV3106SInvalid packed decimal for text insertion - val modname+offsetHLV3107SINVALID REPLY PARAMETER - modname+offsetHLV3108SINVALID REPLY AREA LENGTH - length modname+offsetHLV3109EINTERNAL ERROR DETECTED AT OPSNMG +offset, RC = rcode HLV3110Idata1 data2 data3 data4 data5 data6 data7 data8 data9 data10 HLV3111Ierrdesc for dsname not found for cmd command.HLV3119Tdata1 data2 data3 data4 data5 data6 data7 data8 data9 %SK HLV3120Smethod service FAILED FOR DDNAME=ddname, DSNAME=dsnameHLV3121SRECORD SIZE size INVALID, LRECL=lrecl, BLKSIZE=blksize, DDNAME=ddname, DSNAME=dsnameHLV3122SVSAM service FAILED, RC=rcode, fldname FIELD=fldval, DDNAME=ddname, DSNAME=dsnameHLV3123S UNSUPPORTED obj TYPE, DDNAME=ddname, DSNAME=dsnameHLV3124SSHOWCAT FAILED, RC=rcode, DDNAME=ddname, DSNAME=dsnameHLV3125SINVALID VSAM OBJECT (obj), DDNAME=ddname, DSNAME=dsnameHLV3126EDYNAMIC ALLOCATION FAILED, RC=rcode, ERROR CODE=errcode, INFO CODE=rsncode, DDNAME=ddname, DSNAME=dsnameHLV3127SVSAM service FAILED, RC=rcode, DDNAME=ddname, DSNAME=dsnameHLV3128Eservice desc FAILED RC=rcode, DETECTED AT addrHLV3129Eservice desc HLV3130EDYNAMIC ALLOCATION COMMAND ERROR. errmsg cmd HLV3131EDESERV GET_ALL FAILED: RC=rcode RSN=rsncode - ddname-index:dsname HLV3132EHFS service FAILED FOR path - RC=rcode (name1), RSN=rsncode (name2) - desc1 / desc2 HLV3133EHFS service FAILED FOR path - errdesc additinfo HLV3134Idsname Library directory empty (DDN=ddname) HLV3135EDYNAMIC DEALLOCATION FAILED, RC=rcode, ERROR CODE=errcode, INFO CODE=rsncode, DDNAME=ddname, DSNAME=dsnameHLV3136TUser record exits cannot be loaded because DDNAME ddname is not allocated. Exits: program1 and program2 HLV3137SLoad for user record exit program program failed HLV3138TUser record exits cannot be used because the SQL feature is not configured HLV3139TNon-zero return code from user exit program. RC=rcode HLV3140WINVALID desc CODE func FOR service, DETECTED AT addrHLV3141Ersrc sysserv FAILED, RC=rcode, DETECTED AT addrHLV3142WInvalid data FOR func, Detected at addr. Stack: %SK HLV3143U DISPATCHER FAILURE DETECTED AT addrHLV3144Ersrc sysserv FAILED, RC=rcode, DETECTED AT routine+offset HLV3145Scblk ERROR SUBSYS =subsys HLV3146S EMERGENCY PRODUCT SHUTDOWN STARTED - errdesc HLV3147Trsrc sysserv FAILED, RC=rcode, DETECTED AT routine+offsetHLV3148EMain product address space not active HLV3149EENFREQ reqtype CODE ecode FAILED, RC=rcode. STACK: %SKHLV3150EINVALID desc, VALUE data, DETECTED AT addrHLV3151HABEND abcode IN func modname+offsetHLV3152Werrdesc1 errdesc2 errdesc3, DETECTED AT addrHLV3153EABEND abcode IN func modname+offset HLV3156Ersrc MISSING AND REQUIRED FOR sysserv, DETECTED AT addrHLV3157Efunc ABEND abcode AT addr HLV3200WINVALID SUBPOOL NUMBER=spno REQUESTED BY modname+offset HLV3202Wfunc ERROR RC=rcode REQUESTED BY modname+offset, SP=subp, LEN=lgth, A=addr HLV3204Tmodname+offset func stortype spno stg1 stg2 token HLV3205ESTORAGE ROUTINE ABEND CODE abcode AT modname+offset HLV3206SSUBPOOL subp REQUIRES GLOBAL MASTER AT modname+offsetHLV3207SCROSS MEMORY REQUIRES GLOBAL MASTER AT modname+offsetHLV3208Sstortype RETURNED FOR stortype REQUESTED BY modname+offset, SP=subp, LEN=length HLV3209SNO ASCB SPECIFIED FOR TCB-LEVEL STORAGE REQUEST AT modname+offset HLV3210Sreqtype XFORM SP=subp LEN=lgth A=addr FROM modname+offset,failrsn HLV3211SSTG OBTAINED AT addr NOT 2**reqal BOUNDARY ALIGNED REQUESTED BY modname+offset HLV3212SINVALID REQUEST TO FREE ALL SUBPOOL subp STORAGE REQUESTED BY modname+offset HLV3250Sservice ERROR RC=rcodeHLV3251Icmd msgtext HLV3252Scomponent initialization timeout detected HLV3253Iprodname version prodver build buildno subsystem subsys initialization complete HLV3254Icomponent map build beginning d2 at t2 for ss HLV3255Icomponent map build complete on d2 at t2 for ss HLV3256SSQL map build failed due to component HLV3259E(cmd) invalid command HLV3260IServer subsystem subsys is an ERLY subsystem HLV3300WINVALID desc CODE func FOR service, DETECTED AT addrHLV3301EPLAN plan DBRM dbrm TIMESTAMPS MISMATCH time1 time2 HLV3302Eddname DDNAME not allocated - SQL source not available HLV3303EDBRM OPEN failed for DDNAME=ddname DSNAME=dsname RC=rcodeHLV3304EMember dbrm not found in DBRM library HLV3305Efunc failed for MEMBER=dbrm DDNAME=ddname DSNAME=dsname RC=rcodeHLV3306EDBRM MEMBER dbrm TOO LARGE, MAXIMUM SIZE IS count RECORDS HLV3307EDBRM member dbrm is empty HLV3308EDBRM MEMBER NAME dbrm DOES NOT MATCH PROGRAM NAME program HLV3309ESQL statement stno missing from DBRM dbrm HLV3310EDBRM close FAILED FOR DDNAME=ddname DSNAME=dsname RC=rcodeHLV3311TASSIGN AND CONCATENATE LOB REQUESTS ARE SUSPENDED HLV3312T NETWORKBUFFERSIZE or MXBU value(s) are inadequate for the number of columns in the SQL statement. HLV3313TDB2® subsystem with ASID subsys was not found HLV3314SDB2® subsystem with ASID subsys was not found HLV3315W Operational mode for DB2® subsystem subsys could not be determined HLV3316T Operational mode for DB2® subsystem subsys could not be determined HLV3700HTSO/SRV now using count servers - MIN=parmval1 MAX=parmval2 HLV3701Iservice OF desc FAILED, RC=rcodeHLV3702HTSO/SRV started server jobname,ASID=asid HLV3703WTSO/SRV SUBTASK UNABLE TO SCHEDULE EXTERNAL TSO SERVER - ABEND/POST CODES=(abcode/pcode) HLV3704HTSO/SRV cancelled server jobname,ASID=asid HLV3705IIdle TSO server terminated due to TSOMAXSERVERS HLV3706W Transaction aborted HLV3707STSO/SRV server failed during initialization HLV3708EUnable to find ASVT entry for TSO/SRV server ASID=asid HLV3709WTSO server canceled - max transaction time exceeded HLV3710ICMD TEXT = cmd ,START TIME = time HLV3711IIdle server terminated due to TSOMINSERVERS or TSOSRVDORMANT timeout HLV3712W TSOMAXSERVERS value (parmval1) invalid. Set to TSOMINSERVERS (parmval2). HLV3713ITSO/SRV server added due to excessive queue depth (qdep) HLV3714HTSO/SRV terminated server jobname,ASID=asid HLV3715HTSO/SRV SUBTASK ABEND abcode IN func modname+offsetHLV3716O Cancelled TSO server jobname stepname (ASID=asid), has not terminated HLV3717HTSO server execute queue reset HLV3718ETSO ADDRESS SPACE CREATION FAILED, RC = rcode, REASON CODE = rsncode HLV3720TTSO EXECUTE QUEUE ADD; QD=qdep, CMD=cmd HLV3721TTSO COMMAND DISPATCH; QD=qdep, ASID=asid, QTIME=qtime, CMD=cmd HLV3722TTSO COMMAND RECEIVED; ASID=asid, ETIME=etime, CMD=cmd HLV3723TTSO COMMAND COMPLETE; ASID=asid, ETIME=time1, CPU=time2, I/O=count, CMD=cmd HLV3724Hname (userID) SENT TSO CMD cmd HLV3725TTSO execute processor posted by component HLV3729Tmsgtext var2 var3 HLV3750HSEF var1 var2HLV3751ISEF service OF desc FAILED, RC=rcodeHLV3752WSEF API INITIALIZATION FAILED DUE TO initstep additinfo1 additinfo2 HLV3753WABEND var1 AT var2+var3, SEF COMMAND var4 ABORTED HLV3754ISEF command syntax error: cmd HLV3755Eservice OF PRECOMPILED DATA SET (dsname) FAILED RC=rcodeHLV3756ISEF precompiled rules active HLV3757ISEF var1 var2 HLV3780Ifunc OF desc FAILED, RC=rcodeHLV3781SABEND abcode OCCURRED AT modname+offset - desc HLV3782Sfile ddname error FAILED RC=rcode errdesc HLV3783Sfile ddname processing ABENDED code=abcode reason=rsncode at modname+offset HLV3784Tsrc DUPLICATES THE type ID IN src - SKIPPED HLV3785Hsrc DUPLICATES THE type ID IN src - SKIPPED HLV3790Ifunc OF desc FAILED, RC=rcodeHLV3791Efunc for creating global variable backup, RC = rcode, Reason code = rsncode HLV3792IGlobal Variable Backup address space procedure has been created HLV3800TAn unknown value was found in field field by routine.HLV3847WError compiling SEF rule rule, closing */ not found where expected. HLV3848WError compiling SEF rule rule, INCLUDE name memname too long. HLV3849TSEF version operational mode does not support the func function HLV3850EINTERNAL routine1 ERROR DETECTED BY routine2: CALLER(csect) RTADDR(addr) - additinfoHLV3851INO EXECUTABLE OBJECT (XO) DATASETS ARE CURRENTLY DEFINED OR IN-USE HLV3852I%1 HLV3853I%1HLV3854I %%INCLUDE processing ignored when ISPF EDIT source being compiled, line lineno HLV3855I %%INCLUDE statement syntax invalid, line lineno HLV3856I %%INCLUDE member (member) not found, line lineno HLV3886ERULESET rsname additinfo1, additinfo2 … additinfo8 HLV3887IRULESET rsname additinfo1, additinfo2 … additinfo8 HLV3888ERequired main WWW ruleset not defined - HTTP processing impossible HLV3889ISEF version OPERATIONAL MODE DOES NOT SUPPORT THE func FUNCTION HLV3890Imsgs HLV3891Ioutput HLV3892IINDEX COMMAND OPERAND (operand) IS NOT VALID - NO ACTION TAKEN HLV3893ESEF RULESET rsname HAVE INVALID RULETYPE(ruletype) - RULESET STOPPED/OFFLINE HLV3895Idata HLV3896ERULESET OFFLINE rsname dsname ruletype errdesc HLV3897ERULESET rsname is not defined HLV3898WRULESET rsname1 AND rsname2 ARE BOTH DEFINED AS MASTER WWW RULESETS - RULESET rsname2 FLAGGED WITH STATUS(OFFLINE) HLV3899WNo SEF rulesets have been defined HLV3900TRULE rsname.rulename FOR ruletype pc statusHLV3901Eservice OF operand FAILED, RC=rcodeHLV3902Evar1 var2 SECTION IN RULE var3 HLV3903EINVALID CRITERION crit IN ruletype rule rulename HLV3906Ioutput HLV3907ISEF is not active HLV3908IINVALID SEF REQUEST TYPE reqtype rsname rulename HLV3909IRULE rsname.rulename IS NOT ENABLED HLV3910INo rules enabled in Rule Set rsname HLV3911IRULE rsname.rulename not found HLV3912ENo ISPF statistics for rule rulename in rsname.HLV3913Eind Criterion syntax error lineno in rule rulename HLV3914E INCONSISTENT ind CRITERION lineno IN RULE rulename HLV3915EMAXIMUM OF maxno ind CRITERIA EXCEEDED IN RULE rulename HLV3916ITOD RULE rsname.rulename HAS BEEN DISABLED - ALL TIME CRITERIA HAVE EXPIRED HLV3918EError 43 reqtype program, line lineno: routine routine not found HLV3919ENO VALID RULE HEADER FOUND IN RULE rulename - errdesc HLV3920W Following line(s) ignored in rule rulename: HLV3921WRule rulename contains no executable sections HLV3922IMATCH TABLE LIST - d1 t2 HLV3923IMATCH TABLE AT addr PFX=prefix SFX=suffix LEN=length PRI=pcode ROOT AT root HLV3924IMatch table list empty HLV3925Iseqno rsname.rulename critlvl NODE LVL=lvl ADR=addr1 LO=addr2 HI=addr3 AORL=addr4 LEN=length HLV3926ISECTION section INVALID errdesc ON LINE lineno HLV3927INo match for rulename HLV3928ERULESET rsname rsprefix IS errmsg HLV3929EMaximum ruleset count (count) exceeded HLV3930ERULESET rsname rsprefix errmsg1 errmsg2 HLV3931Eprogram dsname is too large - input buffer overflow HLV3932Eservice OF table FAILED, RC=rcodeHLV3933EABEND IN CELL POOL PROCESSING DURING func HLV3934Eerrdesc BE STORED IN RULESET rsname - ERROR FOUND FOR rsname.rulename HLV3935ECANNOT OPEN ddname (ABEND abcode AT modname+offset) HLV3936Ecmdtype FAILED FOR rsname.rulename - service OF ddname FAILED HLV3937ELISTCOMP FOR RULESET rsname FAILED - NO RULES FOUND HLV3938ERULESET- rsname UNABLE TO ACCESS COMPILED RULES HLV3939ESEF COMPILE PROCESSING OF name FAILED HLV3940E AUTOENABLED FAILED - name IS A REXX EXTERNAL ROUTINE HLV3941WSOURCE OF rulename MODIFIED SINCE LAST COMPILE - SEF WILL USE SOURCE HLV3942INO ruletype RULES ENABLED IN RULESET rsname HLV3943IThere are no rules currently enabled HLV3944Iruleinfo HLV3945Irsinfo HLV3946ITYP PROCEDURE (set member) SET INVALID parmname VALUE OF parmvalHLV3947ITYP EXECUTION MODULE modname NOT FOUND FOR varname IN (set member) HLV3948WToo many sections found in rule procedure HLV3949Iruletype WWW RULE rsname.rulename ALREADY DEFINES THE URL val HLV3950IoutputHLV3951EDDNAME ddname NOT ALLOCATED HLV3952EDDNAME ddname COULD NOT BE OPENED (rcode) additinfo HLV3953Tmsgtext HLV3954EMEMBER member NOT FOUND IN DATA SET ddnameHLV3955EMEMBER member NOT FOUND IN DATA SET ddname HLV3956IFILE ddname NOW statusHLV3957Ioutput HLV3958EABEND abcode (rsn) IN modname+offset DURING service PROCESSING, SOME FILES MAY NOT BE statusHLV3959Icount of total shared data files now statusHLV3960EDSNAME dsname could not be allocated (rcode) HLV3961IDSNAME dsname DDNAME ddname ALLOCATED HLV3962IDDNAME ddname DEALLOCATED HLV3963I Generated DDNAME counter field rollover occurred HLV3964EMember list not valid for sequential data sets DDNAME ddname, DSNAME dsname HLV3965TWARNING: OUTBOUND RESP DATA PRECEDES THIS FILE REQUEST - HTTP RESP PROTOCOL ELEMENTS WILL BE UNUSABLE BY CLIENT HLV3966TExternal data queue full HLV3967Idsname concat HLV3968Iservice FAILED. RETURN CODE: rcode HLV3969IFORMAT OF SHARED FILE BLOCK FAILED - INVALID IDENTIFIER val HLV3970EMATCH CRITERION MUST BEGIN WITH /set - %2.%3 HLV3971E/*WWW STMT - errtext - %2.%3 HLV3972E/*WWW STMT - key MAY ONLY BE CODED WITHIN THE rule RULESET - %3.%4 HLV3973E/*REXX STMT - errtext - %2 HLV3974TRUNAUTH USERID userID - SETUP SUCCEEDED HLV3975TRUNAUTH USERID userID - USERID INVALID HLV3976EDPRTY OPERAND operand - rsn HLV3977TWWW task dispatch priority changed from val1 by val2 HLV3978Toverride OVERRIDE FAILED IN loc - RC=rcode AT addrHLV3979EATH LOGON rule must exit with 'ACCEPT' if ACEE is created for subtask HLV3980ERUNAUTH USERID (userID) LOGON FAILED HLV3981IDefault RUNAUTH USERID userID logged onto system HLV3982EINDEXED DELETE OF rsname.rulename (crit) FAILED (TRACE=tb) - RULE NOT DELETED HLV3983ERULESET rsname action REJECTED BY SEF - additinfoHLV3984HSEF ruleset rsname SEF configuration action accepted HLV3985EXO DATASET dsname ERROR - additinfoHLV3986EFILE ddname action REJECTED BY SEF - additinfoHLV3987HShared file ddname SEF configuration action accepted HLV3988ESEF task is terminating due to severe configuration or environmental error with critical resource HLV3989WSEF RULE MGR ABEND abcode REASON rsncode AT modname+offset WHILE PROCESSING REQUEST plist HLV3990E/*FILE STMT - errtext HLV3991HSEF RULESET rsname DATASET dsname IS status HLV3992TSEF RULESET rsname DATASET dsname IS status HLV3993HSEF RULESET rsname DATASET dsname WAS STOPPED. RSN: rsn HLV3994TSEF RULESET rsname DATASET dsname WAS STOPPED. RSN: rsnHLV3998Idata HLV4000Herrtext HLV4001HUNKNOWN service CODES - R0=R0 R15=R15 HLV4002HUNKNOWN service CODES - RCPR=code1 RCSC=code2 HLV4003Hservice HLV4004Hservice - luname HLV4005Hservice - lu/mode HLV4006HVTAM® APPLID NOT SET - LU 6.2 SUPPORT NOT ACTIVATED HLV4007HINVALID FMH-5 CONTROL BLOCK RECEIVED FROM luname HLV4010TTCB MODE SWITCH ERROR: errdesc additinfoHLV4012TSRB MODE SWITCH ERROR: errdesc additinfoHLV4014TShunting to mode execution mode prior to ABEND retry, retry GPR14 in ABEND traces contains retry target address HLV4015Icount new SRBs scheduled with PRIORITY=CURRENT because no WLM enclave is joined HLV4016SFRR PARAMETER UNSTACK ERROR - rsn HLV4017TTYPE-1 LDU TERMINATION CALL ERROR - failrsn additinfo HLV4018Icount New SRB schedule (IEAMSCHD) failures encountered HLV4019TSession lost (hung) due to type-4 LDU schedule failure HLV4020TDRDA® processing bypassed for connection to subsys, failrsn HLV4021TGeneric (TLS) USERID userID ignored for DRDA® connection HLV4022TCONNECT TO DDF HOST=dom/ip, PORT=portno, CMIDADR=addr CMID=image HLV4023Tcalltype CALL TRACE: crlist HLV4024T Passticket generation failed for USERID=userID, APPL=appl, with RC = rcode HLV4025SMetal-C function func in module modname not found, failrsn HLV4026IDRDA® modules not loaded, Machine below architecture-9 level, Found(lvl) HLV4027Tind being issued to avoid DRDA® idle thread time limit HLV4030Terrdesc TCP/IP HLV4040Eerrdesc HLV4041Tservice buffer size lgth1, address addr, length lgth2 HLV4042EParallel I/O ACI processing disabled HLV4043Terrdesc additinfo HLV4044EMap Reduce processing disabled HLV4045EACI FUNCTION func FAILED, RC=rcode errdesc HLV4046Terrdesc additinfoHLV4047Ttracedesc additinfoHLV4048SBRFRSV unable to decrement OPDM active count. Service name,class,service HLV4050EInvalid HTTP headers - errdesc - received from TCP/IP HLV4051ESSL CONNECTION FAILED - errdesc - RECEIVED FROM TCP/IP HLV4052Tname1 (name2,additinfo) - RV=rval RC=rcode RE=rsncode HLV4053EOPTPIN timed out waiting for a session to be passed HLV4054TNo data read from socket - errdesc - received from TCP/IP HLV4080TInvalid logon attempt by an unknown client detected, connection rejected. HLV4081T Insufficient storage reserve for type (storamt) detected, connection rejected HLV4082TMaximum connected session limit is set to zero, server not accepting new connections HLV4083TSQL is not activated on the server. HLV4084TODBC driver connections are not activated on the server. Session rejected.HLV4085T Transaction Level Security is not activated on the server. Session rejected.HLV4086TNetwork authentication is not enabled on this server. Session rejected HLV4087TAccess to IDMS is not activated.HLV4088TAccess to IDMS is not enabled, set the desired APPC/IDMS initialization parameters HLV4089TSTORED PROCEDURE CALLS ARE NOT SUPPORTED WHEN USING EXTENDED CURSOR POOLS (EXCU=YES). HLV4090TAccess to IMS/TM is not activated.HLV4091TAccess to IMS/TM is not enabled, set the desired IMS/OTMA and/or IMS/APPC initialization parameters HLV4092TAccess to CICS® is not activated.HLV4093TMaximum number of type (count) already connected, connection rejected.HLV4094TAccess to Adabas is not activated.HLV4095TAccess to Adabas is not enabled, enable access by setting the ADABAS parameter value to YES HLV4096TAccess to VSAM is not activated.HLV4097TAccess to IMS/DB is not enabled, enable access by setting the DBCTL parameter value to YES HLV4098TNo active started task copy of the product located HLV4099TCLIENT USERID userID1 UNEQUAL TO TSO USERID userID2HLV4100EBIND WITH rtype rhost FAILED - NO MATCHING errdesc HLV4101TPassword validated for USERID userID from rtype rhost HLV4102TLOGON attempt failed for USERID userID from rtype rhost HLV4103Tmsgtext HLV4104Tmsgtext HLV4105EBind failed - no matching compression type HLV4106EBIND FAILED - NO MATCHING POINTER ENCODING TYPE HLV4107EBIND FAILED - NO MATCHING DATA ENCODING TYPE HLV4108EBIND FAILED - NO MATCHING APPLICATION TYPE HLV4109EBIND FAILED - NO MATCHING PROCESSING FUNCTIONS HLV4110SINVALID MODE DETECTED - LU luname ROUTINE routine HLV4111SINVALID LU NAME DETECTED - ROUTINE routine HLV4112TUsage restricted to oem.HLV4113T%1 HLV4114TDynamic SQL is not allowed by this instance of the server HLV4115S SECONDARY USERID COUNT (count) EXCEEDS MAXIMUM (max) HLV4116TAccess to DB2® is not activated.HLV4117T Connection mode is not activated.HLV4118T Insufficient virtual storage is available to handle this session. Session rejected HLV4119TREXX VARIABLE ERROR rcode1-fbcode rcode2 DURING FETCH OF varname FOR SEF rule procedure HLV4120TREXX VARIABLE varname TRUNCATED FOR SEF RULE rule - SIZE (size) LONGER THAN MAX SIZE (maxsize) HLV4121Wservice OF desc FAILED, RC=rcodeHLV4122WABEND abcode AT modname+offset IN LINE lineno OF rule HLV4123WSEF PROCESSING OF ruletype searchID FOR jobname ABORTED HLV4124WCANNOT language PROCEDURE procname - %3 SECTIONS NOT ENABLED HLV4127Eerrtext FOR MESSAGE ID=msgID HLV4128ERULE rule SET varname TO AN INVALID cblk VALUE HLV4129Eerrtext FOR ruletype RULE rule HLV4130ERule rule disabled for exceeding firing limit of lim HLV4131ERule rule has exceeded the SEF firing limit of lim HLV4132IUser program modname not found in library HLV4134Ersrc sysserv FAILED, RC=rcode, DETECTED AT addrHLV4135ESEF rule processor entered by csect for invalid event type - typecode HLV4136EABEND DURING cblk CONTROL BLOCK LOCATE - SEF RULE EXECUTION BYPASSED HLV4137T ENTERPRISE AUDITING GENERIC USERID userID NOT DEFINED TO HOST SECURITY SYSTEM OR REJECTED.HLV4138T ENCRYPTION METHOD CANNOT BE NEGOTIATED, HOST STORAGE UNAVAILABLE, BIND REJECTED HLV4139TBIND ENCRYPTION METHOD REJECTED - method additinfoHLV4140TLOGON credentials cannot be decrypted HLV4141TLOGON credentials rejected for VCF reconnect, new key exchange required HLV4142T ENCRYPTION METHOD CANNOT BE NEGOTIATED, DIFFIE-HELLMAN MODULE NOT LOADED, BIND REJECTED HLV4143T ENCRYPTION METHOD CANNOT BE NEGOTIATED, DIFFIE-HELLMAN KEY EXCHANGE FAILED, BIND REJECTED HLV4144T ENCRYPTION METHOD CANNOT BE NEGOTIATED, UNKNOWN ENCRYPTION METHOD REQUESTED, BIND REJECTED HLV4145TLOGON CREDENTIALS REJECTED FOR VCID VCID, NEW KEY EXCHANGE REQUIRED, failrsnHLV4146TLOGON CREDENTIALS CANNOT BE DECRYPTED - failrsnHLV4148TMISSING OR INVALID PARAMETERS IN SQL CALL RULE rsname.rulename ,failrsn HLV4149T Connection from ipaddr TCP/IP, host name host, is using unsupported driver version version HLV4150Tdesc addr size PLAN pln %SK HLV4151Tdesc addr1 size DBRM dbrm CURSOR num1 DATA addr2 cnt QUERY length num2 TYPE stmt FLAGS tf %SK HLV4152Tdesc addr size value1 value2 %SK HLV4153Tdesc data length1 length2 col %SK HLV4154Tdesc addr1 size DBRM dbrm CURSOR num1 DATA addr2 cnt QUERY length num2 TYPE stmt FLAGS tf %SK HLV4177TSQL tracing for RPC transactions is not available HLV4178WSQL tracing for RPC transactions is not available HLV4179Wcount New RPC tasks timed out before redispatch by RPC concurrent execution facility HLV4180SInvalid buffer received from a client system HLV4181SRPC DATA WILL NOT FIT INTO BUFFER HLV4182Ipercent percent of max concurrent RPC threshold achieved, value, value HLV4183IMax concurrent RPC execution less than value percent of max setting value, value HLV4184TABEND CC=ccode RS=rsncode DETECTED AT modname+offset BY RPC CONCURRENCY ROUTINE routine recovery additinfoHLV4185HRPC CONCURRENCY FACILITY SDUMP REQUEST RC=rcode, ASSOC TRACE MSGNO=msgno, STATUS AREA=addr HLV4186IMax concurrent RPC allowed (RPCMAX) value exceeded. Suspending execution of RPC. HLV4187IMax concurrent RPC allowed (RPCMAX) value within parameter setting. Execution resumes. HLV4188TRPCMAX TRACE SMTE CONTAINS INVALID TYPE code - ASSUMING ERROR/FFDC FOR CAPTURE HLV4189HWARNING: count ADDITIONAL type EVENTS DETECTED BY RPC CONCURRENCY ROUTINES HLV4190EBIND WITH rtype rhost FAILED - NO MATCHING errdesc HLV4191Emsgtext HLV4192Tservice - error - errdesc HLV4193TAccess to DB2® LUW is not activated. HLV4200Ihost: cmdHLV4201EBIND WITH msgtext %2 FAILED - NO MATCHING %3 HLV4233IError sending message to external data queue HLV4240ILoad balancing resumed for %1HLV4250Emsgtext HLV4251EINVALID ADDRESS addr PASSED BY PROGRAM prognameHLV4260EClient processing disabled HLV4261EACI FUNCTION func FAILED, RC=rcode errdescHLV4262EServer client is not activated on server sysserv. HLV4263IClient processing is enabled. HLV4265WData Server Client buffer expansion disabled due to auxiliary storage event HLV4266IData Server Client services resumed.HLV4267WData Server Client refusing new requests due to auxiliary storage eventHLV4270H%1 SUBSYSTEM NAME NOT SET - %1 TCP/IP SUPPORT NOT ACTIVATED HLV4271SSSL and non-SSL ports match - TCP/IP terminated HLV4272Hvendor TCP/IP component FOR SUBSYSTEM subsys status HLV4273Hprotvend protcomp support is being activated HLV4274SNon-load balancing TCP/IP port matches normal port or SSL port, server terminating.HLV4275Iparmname reached -- at least one process waiting HLV4276Sno new process block dynamic allocation failures due to unknown reasons.HLV4277Sno new process block dynamic allocation failures due to storage restraints.HLV4278Ino new process blocks allocated. Total process block count: total HLV4279Ino new RESMGR E-O-T cleanup failures or stalls detected and corrected HLV4280Tlimtype TIME LIMIT EXCEEDED FOR userid FROM nodetype NODE node PLAN plan CNID connid TP progname HLV4281Tlimtype TIME LIMIT EXCEEDED FOR userid FROM nodetype NODE node PLAN plan CNID connid TP prognameHLV4282Tlimtype TIME LIMIT EXCEEDED FOR userid FROM nodetype NODE node PLAN plan CNID connid TP prognameHLV4283TSMAF update failed for TCB addr1 CMTC entry addr2 SMAF addr3HLV4284SProcess block pool is empty, size is poolsize HLV4285Sno process block allocation failures have been detected HLV4286SOPMS UPDATE FAILED FOR A LOGGING EXCEPTION LIMIT HLV4287Sno PENDING LOGGING REQUESTS FOUND FOR DATABASE subsysHLV4288Sno pending logging requests cleared for database subsysHLV4289Sno SS-PC ENTRY FAILURES DETECTED, LAST: rsn AT time HLV4290Ewstype GLOBAL VARIABLE WORKSPACE IS percent FULL (count OF total BLOCKS USED). PROGRAM=progname. HLV4291TadditinfoHLV4292EPOSSIBLE wstype GLOBAL VARIABLE WORKSPACE INTEGRITY PROBLEM DETECTED (errtype - flag). REBUILD SCHEDULED. HLV4296SGLV subtask has terminated. Zeroing workspace pointers. HLV4297Slock/unlock OF GLOBAL VARIABLE POOL FAILED: HASN=asid1, PASN=asid2, SASN=asid3, MODE=mode, RC=rcode, CALLER=callername HLV4298SGLOBAL VARIABLE lock/unlock RECURSION ERROR DETECTED AT addrHLV4300ISEF command rejected - subsystem subsys is not active HLV4301Sservice - desc FAILED, RC=rcodeHLV4302SABEND abcode, RS=rsncode IN 'ADDRESS hostenv' AT modname+offset, PSW=psw HLV4303ESEF command timed out before all responses received.HLV4304ESEF COMMAND errdesc: cmdnameHLV4305EHLV/SWS version ver1 is incompatible with version ver2 of subsystem subsys.HLV4307ESUBSYS SEF command cannot be issued in a rule HLV4308Eerrdesc, RC=rcodeHLV4319TABEND IN 'ADDRESS SWSSEND' CODE=ccode, REASON=rsncode AT addrHLV4320Hsubsysid SEF CMD FROM(jobname,userid): cmdHLV4321ECURRENT verb COMMAND NOT AUTHORIZED - errmsg HLV4322SABEND abcode IN AUTHORIZATION ROUTINE modname+offset HLV4336EmsgtextHLV4337TTHE TSO COMMAND IS INVALID DUE TO errdesc HLV4338ITSO REMOTE EXECUTION TIMEOUT VALUE SET TO time HLV4339Tenvironment COMMAND TIMED OUT HLV4340S Subsystem subsysid inactive, must be (re)started HLV4341STSO/E is not installed HLV4342ETSO command length (length) exceeds maximum length (maxlength) HLV4343STSO service error - errdesc HLV4344STSO service error - abcode1 abcode2 - reason code rsncode HLV4345STSO service error - errdesc - reason code rsncode HLV4346ECurrent verbaddr command not authorized - errmsg HLV4347SABEND abcode IN AUTHORIZATION ROUTINE modname+offset HLV4348Srsrcname sysserv FAILED, RC=rcode, DETECTED AT addr HLV4349SMESSAGE SEND TO TSO EXECUTE QUEUE FAILED, RC=rcode, DETECTED AT addrHLV4350ILoad for module modname failed, CCTL initialization error HLV4351IDRA control exit invalid PAPL subfunction = sfcdHLV4352IDRA control exit invalid PAPL function = funcdHLV4353IIMS™ CCTL support activated HLV4354IIMS™ CCTL support terminating HLV4355IIMS™ CCTL control exit resync failure HLV4356IIMS™ DRA terminating due to unknown error condition HLV4357IInvalid request, IMS™ CCTL feature not enabled HLV4358IRequest failed product not identified to IMS™ HLV4359IPSB psb schedule request unsuccessful HLV4360IRequest failed - PSB not in scheduled state HLV4362IInvalid buffer function code funcdHLV4363IPrevious CCTL termination failed, initialization will use previous session PAPLCTOK value HLV4370TAccess to Services is not activated.HLV4371TServices is not active on the server HLV4372HWEB SERVICE %1 UNDER VIRTUAL DIRECTORY %2 HAS BEEN %3 HLV4375WOE sockets WSOEPORT conflict with PIO port - zervices HTTP listener terminating HLV4376WMongoDB support services TCP/IP port(s) conflict with other port number assignments - Mongo terminating HLV4377WMongoDB listener ports not set - MongoDB support will not be activated HLV4378WOE sockets HTTP port (WSOEPORT) conflicts with main OE port (OEPORTNUMBER) - HTTP listener terminating HLV4379WOE sockets HTTP port (WSOEPORT) unset - HTTP && Services support unavailable HLV4380EMongoDB feature is not configured - Mongo listener on port portno will not be activated.HLV4381HParallel I/O port OPEN failure HLV4382HNon load-balanced port OPEN failure HLV4383HOE sockets TCP/IP DubProcess failed. RC=rcode. Reason code=rsncode. HLV4384SServices load balancing port not unique, server terminating HLV4385HWS load-balanced port OPEN failure HLV4386SSSL port number required - OE sockets TCP/IP processing terminated HLV4387SPIO and ODBC ports match - OE sockets PIO port is reset to zero HLV4388SSSL and non-SSL ports match - OE sockets SSL port is reset to zero HLV4389SOE stack oestack can not be used - OE sockets TCP/IP processing terminated HLV4390EInvalid dynamic VIPA IP address %1 specified HLV4391IOE stack binding port portno to IP address ipaddrHLV4392IOE stack returning invalid results when sockets are ready HLV4393IOE stack returning too soon from select when no sockets are ready HLV4400Tmsgtext HLV4401WNo TCP/IP port number specified.HLV4410Eservice OF desc FAILED RC=rcode, DETECTED AT addrHLV4411EGLOBAL VARIABLE RULE CHAINING DEPTH EXCEEDS MAXIMUM VALUE HLV4413Ino MESSAGES SINCE THE LAST ARCHIVE. CURRENT MESSAGE NUMBER IS seqno HLV4420Hmsgtext HLV4421HUNKNOWN service CODES - R0=r0 R15=r15 HLV4422HUNKNOWN service CODES - ERCD=errcd DGCD=diagcd HLV4423HUNKNOWN service CODES - ERCD=errcd DGCD=diagcd HLV4450Sjobname error inquiring CICS® system information for client - EIBRESP: respcdHLV4451Sjobname error enabling client exit program progname - EIBRESP: respcdHLV4452Sjobname error extracting GWA address for client program progname - EIBRESP: respcdHLV4453Sjobname error starting client exit program progname - EIBRESP: respcdHLV4454Ijobname client exit program progname started HLV4455Sjobname GWA length not as expected for client exit program progname - explength: explength, returned: GWA HLV4456Ijobname program creation date: date HLV4457Sjobname Program load failed - EIBRESP: respcdHLV4458Wjobname client exit program progname is already enabled HLV4459Ijobname client exit program program is enabled HLV4460Ijobname Program GWA address: addrHLV4470SIMS™ CCTL FEATURE MUST BE ENABLED TO ISSUE DL/I CALLS HLV4471SINVALID PSB SCHEDULE ATTEMPT - PSB ALREADY SCHEDULED HLV4472SPSB SCHEDULE FAILURE - PSB NAME = psbname HLV4473SINVALID DL/I CALL ATTEMPT - PSB NOT SCHEDULED HLV4500Udesc INITIAL GETMAIN FAILED - INCREASE STORAGE SIZE HLV4501Udesc UNABLE TO LOCATE THE MASTER BLOCK HLV4502Hprocess subtask is active HLV4503SESTAE service ERROR RC=rcodeHLV4504Ersrc sysserv FAILED, RC=rcode, DETECTED AT addr HLV4505HABEND abcode IN service modname+offset HLV4506Hprocess subtask terminating HLV4507ESUBTASK ERROR TERMINATION: RC=rcodeHLV4508Hsubtask SUBTASK: objname objval HLV4520WLOAD FOR MODULE modname FAILED, ODBA INITIALIZATION ERROR HLV4521SUnable to implant ODBA interface, return code: rcodeHLV4522WUNABLE TO CONNECT TO IMS/ODBA FOR STARTUP TABLE ID: tblid, RETURN CODE: rcode, REASON CODE: rsncode, ERROR CODE: errcd HLV4523WERROR IN DISCONNECTING FROM IMS/ODBA CONNECTIONS. RETURN CODE: rcode, REASON CODE: rsncode HLV4524WERROR IN DISCONNECTING FROM IMS/ODBA CONNECTION tblid. RETURN CODE: rcode, REASON CODE: rsncode, ERROR CODE: errcd HLV4525IMAXIMUM NUMBER OF SIMULTANEOUS ODBA CONNECTIONS (max) REACHED - no TIMES - CONNECTION DENIED HLV4526Ino ODBA CONNECTION ENTRIES FREED HLV4527TODBA interface not type HLV4528ILoad for module modname failed, ODBA interface disabled HLV4529WERROR IN DEALLOCATING PSB: psb FOR STARTUP TABLE tblid DURING ODBA/RPC CLEANUP. RC: rcode, RE: rsncode HLV4530IIMS/DB ODBA INTERFACE TERMINATED HLV4531WERROR TERMINATING IMS/DB ODBA INTERFACE. RC: rcode, RE: rsncodeHLV4532SODBA STARTUP TABLE MODULE - modname - IS NOT RE-ENTRANT. UNABLE TO MODIFY HLV4533SODBA MODIFY ACTION BYPASSED FOR TABLE modnameHLV4534Ireq OF IMS/ODBA CONNECTION FOR STARTUP TABLE modname resolutionHLV4550TOPRXSQ - USER userid CONNECTED WITH UNOPTIMIZED PLAN planHLV4551Tdbrm - UNRECOGNIZED type PROVIDED - SECTION stmtno - STATEMENT sectnoHLV4552T COLLECTION ID collname FOR PLAN plan WILL USE PACKAGE PROCESSING HLV4553TPACKAGE OPRXSQ dbrm SECTION sectno1 USED FOR SECTION sectno1 STATEMENT stmtnoHLV4554TPLAN plan DOES NOT USE PACKAGE PROCESSING HLV4555TPACKAGE OPRXSQ pkge IN COLLECTION collname SELECTED HLV4556TPLAN plan WILL USE PACKAGE PROCESSING HLV4557TPACKAGE OPRXSQ pkge SELECTED HLV4558TPLAN plan WILL USE DRDA® SUBSTITUTE PACKAGES HLV4601IstatusHLV4602Icmdname HLV4603ISERVER asid POSTED FOR TERMINATION HLV4604ISERVER POSTED TO FREE TSSD AT addr HLV4605Istatus HLV4606EADDRESS SEF TSOSRV_STOP asid: ASID NOT SERVER ADDRESS SPACE HLV4607Sfuncd OF queue FAILED, RC=rcodeHLV4608EADDRESS SEF TSOSRV_FREE addr: ADDRESS NOT THAT OF A TSSD HLV4609Istats HLV4612Hjobname HAS RESET THE TSO SERVER COMMAND EXECUTION QUEUE HLV4650EUNABLE TO OBTAIN storsize BYTES BELOW THE LINE HLV4680TENCLAVE SET RC=rcode FOR CALL CODE callcd (calltype) - failmsg HLV4681TROUTINE INVOKED WAS indexcd - subrout HLV4682TROUTINE RC=rcode REASON=rsncode ENCLAVE FEEDBACK(feedback) HLV4683TENCLAVE MGR CANNOT REENTER SUPERVISOR STATE HLV4684TENCLAVE ABENDED CONDITION CODE=ccode, REASON=rsncode FOR CALL CODE callcd (calltype) - failmsg HLV4685Tapi PLIST ERROR errdesc - plistval (data) HLV4686Smsgtext HLV4687TENCLAVE TERMINATED BY COBOL STOP RUN - CLIENT CONNECTION TERMINATED HLV4700T%1 MODEL QUEUE NAME NOT SET - %2 USED AS MODEL QUEUE HLV4702T'%1' INPUT QUEUE NAME NOT SET - '%1' PROCESSING TERMINATED HLV4704HUNKNOWN service CODES - RE=rsncode RC=rcodeHLV4706Tmsgtext HLV4750TIDCAMS SYSPRINT: msgtext HLV4751TIDCAMS WARNING: msgtext HLV4752TIDCAMS SYSIN: msgtext HLV4753TIDCAMS RESULTS: LASTCC=lstcc COMPCODE=ccode REASCODE=rsncode HLV4800EDYNALLOC reqtype ddname - ABEND - COND=condcd REASON=rcodeHLV4801Hcmdname command (issued internally) rejected - another request request is already running HLV4802HABEND CC(condcd) REASON(rsncode) IN modname+offset WHILE PROCESSING cmdname COMMAND ISSUED BY userid HLV4803Ecmdname COMMAND FROM userid FAILED - RC = rcode desc ccodeHLV4804ETrace Browse archiving disabled because BROWSEMAX(val) value is less than the minimum(minval) allowed HLV4805H BROWSEARCHIVECOUNT parameter has been set to val - was below minimum (minval) allowed HLV4806H BROWSEARCHIVECOUNT parameter has been set to val - was above maximum (maxval) allowed HLV4807H BROWSEARCHIVECUSHION parameter has been set to val HLV4808SArchive backup is under stress - val messages can be logged before overlay HLV4809STrace Browse in overlay mode - unarchived records are being overwritten HLV4810HTrace 'BACKUP ARCHIVE' command should be externally scheduled HLV4811HTrace 'ARCHIVE BACKUP' is being automatically requested HLV4812ESEF INTERFACE SET RC=rcode FOR cmdname COMMAND REQUEST ISSUED BY useridHLV4813Icmdname command cannot be scheduled at this time - a similar request is already running HLV4814Icmdname command cannot be scheduled at this time - all SEF service subtasks are busy HLV4815ISEF service task, tskname, attached for cmdname - requested by userid-reqorigin HLV4816IRunning: EFTK cbaddr Routine:routine TCB addr USERID userid UTYPE reqtype ECB ecb CMD cmdnameHLV4817ITRACE: CURRENTMSG msgno LASTARCHIVED msgno LASTTRIGGERED msgno DSNAME word1 CTLS word2 %6 HLV4818E Processing of cmdname command by subtask subtask terminated by E-O-T - RC=rcodeHLV4819TService subtask subtask completed processing of cmdname command sent by userid - RC=rcodeHLV4820E Processing of cmdname command by subtask subtask terminated by product shutdown - RC=rcodeHLV4821TService subtask subtask forcibly detached at shutdown - cmdname command sent by userid - RC=rcodeHLV4822H'ARCHIVE BACKUP' processor has been attached as an SEF service subtask HLV4823HArchive file: DSN=dsname, FirstMsg=msgno, LastMsg=msgno, Count=count HLV4824Hcount messages beginning at number msgno cannot be backed up due to Trace wraparound HLV4825HNO WORK TO DO - ARCHIVE STARTING MESSAGE = msgno - ENDING MESSAGE = msgnoHLV4826WARCHIVE PROCESSING ABORTED DUE TO SUBSYSTEM OR SEF TERMINATION REQUEST HLV4827ImsgdataHLV4828Eprocedure REXX PROCEDURE RETURNED INVALID/INCORRECT RESULT FOR ARCHIVE DATA SET calltype REQUEST HLV4829Eprocedure REXX PROCEDURE FAILED FOR calltype REQUEST - ROUTINE SET RETURN CODE TO rcodeHLV4830Eprocedure REXX PROCEDURE FAILED TO RETURN DATA SET NAME FOR calltype REQUEST HLV4831EDYNALLOC FAILURE - RC=rcode ERROR=errcd REASON=rsncode descHLV4832H Allocated: DDN=ddname, DSN=dsname - for archive output HLV4833HLDS dsname created for cmdname command issues by userid HLV4834Sservice OF desc FAILED, RC=rcodeHLV4835Sservice OF dsname FAILED, RC=rcode, REASON CODE=rsncode HLV4836Sservice OF dsname FAILED, ABEND=abcode, REASON CODE=rsncode HLV4837SPossible shortage of storage, storsize bytes required to build archive output data set HLV4838H Deallocated: DDN=ddname, DSN=dsname - for archive output HLV4839WArchive file: count invalid/overlaid messages detected during execution HLV4840H CLEARARCHIVERECOVERY PARAMETER SET TO YES - IN-FLIGHT ARCHIVE archtyp INFORMATION BEING CLEARED HLV4841HCLEARED BACKUP RECOVERY INFO - OUTDSN=dsname MSGSTART=msgno MSGCOUNT=count LASTARCH=msgno HLV4842HCLEARED EXTRACT RECOVERY INFO - OUTDSN=dsname MSGSTART=msgno MSGCOUNT=count FORUSER=user HLV4843Icmdname command from userid completed successfully HLV4844HArchive backup of trace has successfully completed HLV4845HTrace: current message is msgno - count messages since last archive HLV4846HTrace: last message archived was msgno - last requested for message msgnoHLV4847Icmdname CMD NOT SCHEDULED - DUPLICATE %2 CMD RECOVERY NOT COMPLETED HLV4848Hcmdname CMD NOT SCHEDULED - DUPLICATE %2 CMD RECOVERY NOT COMPLETED HLV4849I PARAMETERS: OPTION parval1 COUNT parmal2 CUSHION parval3HLV4850Idesc TYPE archtyp USER userid STARTMSG msgno MSGCOUNT count DSNAME dsnameHLV4854ETHE DIV OBJECT, dsname, CANNOT BE MAPPED - THE VERSION CODE (%1) IS BACKLEVEL AND INCOMPATIBLE HLV4855ETHE DIV OBJECT, dsname, CANNOT BE MAPPED - THE HI-USED-RBA code IS LESS THAN THE DIV-ACCESS PAGE COUNT size RETURN VALUE HLV4856ETHE DIV OBJECT, dsname, CANNOT BE MAPPED - THE DATA SET CONTROL AREA (BOST) IS INVALID HLV4857ETHE DIV OBJECT, dsname, CANNOT BE MAPPED - THE DATA SET CONTROL AREA SIZE INFORMATION (size1/size2) DOES NOT MATCH THE DIV OPEN STATS (size3/size4) HLV4858ETHE DIV OBJECT, dsname, CANNOT BE MAPPED - THE DATA SET CONTROL AREA pointer POINTER (ptrval) IS renALID baseptr/countHLV4859IArchive reset command issued by userid has changed last-archived message from msgno to msgno HLV4860TARCHIVE FILE: DSN=dsname, FIRSTMSG=msgno, LASTMSG=msgno, COUNT=countHLV4861Istatement HLV4862Istatement HLV4863Iparmval1, parmval2, ... parmval5HLV4864Iparmval1, parmval2, ... parmval5 HLV4865ETrace Browse archiving disabled because 'ARCHIVEDSNPREFIX' parameter is not set HLV4866Eservice of archive output data set failed due to failrsnHLV4867EIDCAMS UTILITY LASTCC=lastcc --- ABEND CONDITION ccode, REASON rcode - SYSPRINT FOLLOWS HLV4868EIDCAMS SYSPRINT: msgdata HLV4869ETRACE BROWSE EXTRACTS DISABLED BECAUSE 'EXTRACTDSNPREFIX' PARAMETER IS NOT SET HLV4870Ereqtype reqfunc - ABEND - CODE=abcode REASON=rsncode HLV4871S Automatic archival of Trace suspended due to previous error - correct problem and issue "ARCHIVE CLEANUP" HLV5000SMESSAGE NUMBER msgno IS NOT DEFINED HLV5001Sobject IS AN INVALID %PX OBJECT HLV5002Scmdname is an invalid %PX command. HLV5003Skeyword is an invalid keyword.HLV5004SThe keyword keyword is missing.HLV5005Svalue is not a valid value for the keyword keyword. HLV5006Skeyword IS ONLY VALID FOR TYPE = ktype HLV5007SLINK host already exists.HLV5008UOPRXPC TERMINATED WITH SEVERE ERROR RC = rcodeHLV5009SMODIFY CONTAINS FIELDS NOT SUPPORTED BY LINK TYPE HLV5010EHOST = host DOES NOT EXIST HLV5011Sobject DISPLAY FAILED WITH RC = rcodeHLV5012Skeyword CONTAINS A QUOTE AND QUOTES ARE NOT PERMITTED HLV5013S%PX SUBSYSTEM subsys IS NOT ACTIVE HLV5014Ssubsystem IS AN INVALID SUBSYSTEM NAME HLV5015EDATABASE subsys IS ALREADY DEFINED HLV5016EDATABASE = subsys DOES NOT EXIST HLV5017Sparmname IS NOT A VALID PRODUCT PARAMETER NAME HLV5018Sparmval IS NOT A VALID VALUE FOR parmnameHLV5019Esubsys IS A DB2® DATABASE SUBSYSTEM HLV5020EANOTHER COPY OF THE PRODUCT USES DATABASE SUBSYSTEM NAME subsys HLV5021EDATABASE SUBSYSTEM subsys COULD NOT BE CREATED HLV5022EANOTHER PRODUCT USES DATABASE SUBSYSTEM NAME subsys HLV5023E CONNECTION conn IS ALREADY DEFINED HLV5024ESESSION session IS ALREADY DEFINED HLV5025IDDNAME ddname IS NOT ALLOCATED TO PRODUCT ADDRESS SPACE HLV5026TMEASURED USAGE reqtype COMPLETED SUCCESSFULLY HLV5027TMEASURED USAGE reqtype REQUEST MAY HAVE FAILED, RC=rcodeHLV6000TENTER MODULE csect HLV6003TMATCHING SSCT LOCATED FOR SUBSYSTEM subsys HLV6004TTRANSFERRING CONTROL TO MODULE DSNECP00 HLV6007TPRIOR TO LINKING TO OPDSN10 SUBCOMMAND HANDLER HLV6008TRETURN FROM LINKING TO OPDSN10 SUBCOMMAND HANDLER HLV6009TPRIOR TO ATTACHING OPDSN10 SUBCOMMAND HANDLER HLV6010TRETURN FROM ATTACHING OPDSN10 SUBCOMMAND HANDLER HLV6011TOPDSN10 SUBCOMMAND HANDLER DETACHED SUCCESSFULLY HLV6013TEXITING MODULE csect HLV6014TOPDSN10 STAX EXIT SUCCESSFULLY ESTABLISHED HLV6015TOPDSN10 STAX EXIT SUCCESSFULLY REMOVED HLV6016TVALID SUBCOMMAND subcmd ACCEPTED HLV6017T UNRECOGNIZED SUBCOMMAND ASSUME TSO COMMAND subcmd HLV6018TPRIOR TO LINKING TO TSO COMMAND subcmd HLV6019TRETURN FROM LINKING TO TSO COMMAND subcmd HLV6020TPRIOR TO ATTACHING TSO COMMAND subcmd HLV6021TRETURN FROM ATTACHING TSO COMMAND subcmd HLV6022T SUCCESSFUL DETACH TSO COMMAND cmdname HLV6023T SUCCESSFULLY ALLOCATED DATA SET dsnameHLV6024T SUCCESSFULLY DEALLOCATED DATA SET dsname HLV6025TRUN SUBCOMMAND BUFFER PARSED SUCCESSFULLY HLV6026TLIBRARY : dsname HLV6027TPLANID : plannameHLV6028TPROGRAM : progname HLV6029TCP : indicatorHLV6030TPARMS : indicator HLV6031TBEFORE IDENTIFY DB2® CALL =========================== HLV6032TAFTER IDENTIFY DB2® CALL ============================ HLV6033TBEFORE CREATE THREAD DB2® CALL ====================== HLV6034TAFTER CREATE THREAD DB2® CALL ======================= HLV6037TBEFORE TERMINATE DB2® CALL ========================== HLV6038TAFTER TERMINATE DB2® CALL =========================== HLV6039TPRIOR TO LINKING TO PROGRAM progname HLV6040TRETURN FROM LINKING TO PROGRAM progname HLV6041T APPLICATION PROGRAM FAILED WITH ABEND CODE abcode HLV6042TRRSAF func function RC rcode Reason rsncode was converted to RC 0 Reason 0. HLV6500SABEND abcode RS=rsncode OCCURRED AT modname+offset DURING DMF func entityid HLV6501WDMF operation WARNING: rsn itemHLV6502SDMF operation ERROR: rsn item HLV6503IDMF IMPORT var MAP member FROM source additinfo HLV6504IDMF import has refreshed in-storage data maps HLV6505IDMF import parsed map map from sourceHLV6506TRequired map map for conversion of EXCI to ACI missing HLV6507TUnable to create server serverconnection for CICS® connection connection HLV6509IDMF PROCESSING COMPLETE HLV6520HDMF Data-In-Virtual cache is being initialized for revision level lvl support HLV6521HExisting DMF DIV cache at revision level lvl must be re-initialized at current level HLV6522HExisting DMF DIV cache being discarded due to incomplete update at last LDS expansion HLV6523HExisting DMF DIV cache being discarded due to window relocation problem HLV6524HExisting DMF DIV cache being discarded due to unknown object type (%1) HLV6525SDMF DIV cache routine %1 invoked within invalid x-mem environment HLV6526SFree of DMF block in DIV cache failed - address of block (%1) is not %2 HLV6527HExisting dmf div cache being discarded. an invalid %1 OBJect chain was found by %2. HLV6528HToo many virtual directories - dataset %1 not processed for path %2 HLV7000ISyntax error: unmatched parenthesis HLV7001ISyntax error: unmatched quotation mark or apostroph HLV7002ISyntax error: insufficient storage for parsing the command (rsncode) HLV7003ISyntax error: invalid hex literal HLV7004ISyntax error: extraneous or undefined input at token HLV7005ISyntax error: positional param. parmno of parmname - errdescHLV7006ISyntax error: required keyword keyword - missing HLV7007ISyntax error: required keyword missing - must be on HLV7008IkeywordHLV7009ISyntax error: operand of keyword is invalid or missing HLV7010ISyntax error: errdesc HLV7050TVariable varname (val) set to "%3" HLV7101TError 01 @(lineno/offset) - too many nexted html extension delimiter pairs on this source line. HLV7102TError 02 @(lineno/offset) - un-matched <%% delimiter in source line. HLV7103TError 03 @(lineno/offset) - too many tokens, or tokens invalid IN statement. HLV7104TError 04 @(lineno/offset) - un-identified or invalid html extension statement. HLV7105TError 05 @(lineno/offset) - this statement type must be on a LINE with no other non-blank text. HLV7106TError 06 @(lineno/offset) - invalid token or label precedes statement operation keyword. HLV7107TError 07 @(lineno/offset) - invalid statement label syntax. HLV7108TError 08 @(lineno/offset) - too many operands for statement type. HLV7109TError 09 @(lineno/offset) - too few operands for statement type. HLV7110TError 10 @(lineno/offset) - invalid exit statement operand value. HLV7111TError 11 @(lineno/offset) - invalid keyword specified - not advance or no advance. HLV7112TError 12 @(lineno/offset) - invalid condition name for if statement operand two. HLV7113TError 13 @(lineno/offset) - variable name symbol too long - maximum name size is 50 characters. HLV7114TError 14 @(lineno/offset) - number of nested if/endif statement pairs exceeds compiler maximum. HLV7115TError 15 @(lineno/offset) - else without preceding if statement. HLV7116TError 16 @(lineno/offset) - duplicate else statements for current if/endif pair. HLV7117TError 17 @(lineno/offset) - endif not preceded by if statement. HLV7118TError 18 @(lineno/offset) - nested do/enddo groups exceeds compiler maximum nesting levels. HLV7119TError 19 @(lineno/offset) - statement should only appear within do/enddo statement group. HLV7120TError 20 @(lineno/offset) - label name not defined by any preceding do statement. HLV7121TError 21 @(lineno/offset) - number of leave statements exceeds compiler maximums. HLV7122TError 22 @(lineno/offset) - duplicate do statement label name defined. HLV7123TError 23 @(lineno/offset) - label not defined in source file HLV7124TError 24 @(lineno/offset) - compiler maximum for label names within a source file exceeded. HLV7125TError 25 @(lineno/offset) - one or more referenced statement labels are undefined in source file. HLV7126TError 26 @(lineno/offset) - compiler area overflow - source fIle too complex. HLV7127TError 27 @(lineno/offset) - one or more if statements has no matching endif. HLV7128TError 28 @(lineno/offset) - one or more do statements has no matching enddo. HLV7129TERROR 29 @(lineno/offset) - ADDITIONAL ERRORS WERE DETECTED IN SOURCE FILE - FIRST 5 REPORTED. HLV7130TERROR 30 @(lineno/offset) - INVALID SWSINFO() PSEUDO=FUNCTION OPERAND VALUE. HLV7131TERROR 31 @(lineno/offset) - HTXINDEX. STEM SYNTAX INVALID. HLV7132TERROR 32 @(lineno/offset) - FOR 'HTXINDEX.LABEL' - THE 'LABEL' NAME IS NOT DEFINED. HLV7133TERROR 33 @(lineno/offset) - INVALID SWSPARM() PSEUDO-FUNCTIONOPERAND VALUE. HLV7134TERROR 34 @(lineno/offset) - INVALID TOUPPER() PSEDUO-FUNCTIONOPERAND VALUE. HLV7135TERROR 35 @(lineno/offset) - NESTED RULE STATEMENTS ARE NOT ALLOWED. HLV7136TERROR 36 @(lineno/offset) - AN UNMATCHED /RULE STATEMENT WAS ENCOUNTERED. HLV7137TERROR 37 @(lineno/offset) - STORAGE ALLOCATION FAILURE DURING RULE PROCESSING. HLV7138TERROR 38 @(lineno/offset) - ONE OR MORE RULE STATEMENTS HAS NO MATCHING /RULE. HLV7139TERROR 39 @(lineno/offset) - ENABLEMENT FAILED FOR EMBEDDED RULE. HLV7140TERROR 40 @(lineno/offset) - /*FILE SECTIONS ARE NOT ALLOWED WITHIN EMBEDDED RULES. HLV7141TERROR 41 @(lineno/offset) - DATE(?) OPERAND INVALID OR NOT SPECIFIED. HLV7142TERROR 42 @(lineno/offset) - TIME(?) OPERAND INVALID OR NOT SPECIFIED. HLV7143TERROR 43 @(lineno/offset) - EMBEDDED RULES CANNOT BE EMPTY. HLV7144TERROR 44 @(lineno/offset) - TARGET OF ASSIGNMENT MUST BE L-VALUE. HLV7145TERROR 45 @(lineno/offset) - IMS™ AUTO-HTML VARIABLE REFERENCE IS BADLY FORMED HLV7146TERROR 46 @(lineno/offset) - !OPTIONS STATEMENT INVALID HLV7147TERROR 47 @(lineno/offset) - !OPTIONS STATEMENT OUT OF ORDER HLV7148TERROR 48 @(lineno/offset) - INVALID ENVIRONMENT FOR STATEMENT HLV7149TERROR 49 @(lineno/offset) - IMSATTR STATEMENTS NO LONGER SUPPORTED HLV7150T /*UTILITY STMT - errtext (funcode) HLV7151T /*UTILITY STMT - errmsg - statement HLV7152TUTILITY FUNCTION funcode NOT ENABLED. ASSOCIATED MODULE (modname) NOT FOUND IN THE %3 LIBRARY. HLV7153TACCESS TO UTILITY ROUTINES IS NOT AUTHORIZED. HLV7160TLINE lineno - HTML EVALUATION ERROR (errdesc) - additinfo HLV7161EABEND abcode, REASON rsncode DURING HTX PROCESSING HLV7162EvarHLV7163EABEND abcode, REASON rsncode DURING OPHTXPR ABEND RECOVERY HLV7164TRUNTIME ERROR (LINE lineno) - EMBEDDED RULES AND RESCAN STMT NOT ALLOWED IN THIS FILE. HLV7165TRUNTIME ERROR (LINE lineno) - ASSIGNMENT STMT FAILED - errdesc - lval HLV7166T<%RULE%> EXECUTION MUST NOT DRIVE RECURSIVE <%RULE%> EXECUTION HLV7167EABEND abcode, REASON rsncode DURING HTX PROCESSING OF EMBEDDED ruletype RULE HLV7168TLINE lineno - EXIT-FLUSH STATEMENT EXECUTED - RESCAN AND NEW RULE MATCHES DISABLED HLV7169TLINE lineno - RESCAN STATEMENT OPERAND INVALID - reason - VALUE=valueHLV7170TLINE lineno - EXIT OPTION, option, IGNORED BECAUSE <%RULE%> PROCESSING NOT ENABLED HLV7171TLINE lineno - !OPTIONS statement - errdesc HLV7172TERROR 72 @(lineno/offset) - RESULTSET OPERAND INVALID OR NOT SPECIFIED. HLV7178TdiagtextHLV7179EDATA MAPPING - map FIELD field IS TOO LONG HLV7180E /*EXECSQL STMT - errtext HLV7181T /*EXECSQL STMT - errmsg - statement HLV7182THTML MEMBER NAME MISSING OR INVALID. DATA MAP: map, HTML MEMBER: memnameHLV7183E /*EXECIMS STMT - errtext HLV7184T /*EXECIMS STMT - errmsg - statementHLV7185EUNABLE TO OBTAIN INPUT STORAGE WORK AREA. LENGTH %1 HLV7186EREQUIRED HTML VARIABLE MISSING. NAME=varname HLV7187E /*EXECCICS STMT - errtext HLV7188T /*EXECCICS STMT - errmsg - statementHLV7189T TEMPORARY MAP map USED FOR HTML FILE SELECTION HLV7190E/*TSOSRV STMT - errtext HLV7191T/*TSOSRV STMT - errmsg - cmdtextHLV7192T/*TSOSRV STMT - errmsg - cmdtext HLV7195E rsname.rulename, /*PROGRAM STMT - errtextHLV7200T HTTP-RECV: operdesc HLV7201T HTTP-RECV: RECEIVED reclength, TOTAL totlength HLV7202T HTTP-RECV: HTTP REQUEST HEADERS - LENGTH length, DELIMITER dlmtr HLV7203T HTTP-RECV: HTTP CONTENT-LENGTH: clval HLV7204TVARIABLE WWW.varname NOT BUILT - reason HLV7205TSSL ACCEPT FAILED - RC=rcd1 REAS=rsncode - ENCLAVE RC=rcd2 FEEDBACK=feedback) HLV7206TSSL READ FAILED RC=rcd1 REAS=rsncode - ENCLAVE RC=rcd3 FEEDBACK=(feedback) HLV7207TSSL WRITE FAILED RC=rcd1 REAS=rsncode - ENCLAVE RC=rcd2 FEEDBACK=(feedback) HLV7208TSSL CLOSE FAILED RC=rcd1 REAS=rsncode - ENCLAVE RC=rcd2 FEEDBACK=(feedback) HLV7209Tvar1, var2 … var5HLV7210TSERVER VARIABLE varname SKIPPED BY GLVSTATE. PROCESSING HLV7211TSSL CONNECT FAILED - RC=rcd1 REAS=rsncode - ENCLAVE RC=rcd2 FEEDBACK=(feedback) HLV7212TRELEASE OF SPECIALLY SIZED watype AT addr1 FOR OPPR AT addr2 FAILED WITH RC=rcodeHLV7213TSSL READ: desc HLV7214TMAXIMUM NUMBER OF QUERY VARIABLES(maxno) EXCEEDED - INBOUND REQUEST CANNOT BE PARSED HLV7215TCANNOT DECODE DBCS QUERY DATA data HLV7216TSSL ACCEPT LEFT count UNCONSUMED LOOK-AHEAD BYTES - REJECTING SESSION HLV7217T HTTP-RECV: HTTP TRANSFER-ENCODING: val HLV7218T HTTP-RECV: HTTP CONTENT CHUNK LENGTH: val HLV7230TWEB BUFFER FLUSH ATTEMPTED IN X-MEM MODE BY modname+offsetHLV7231TSWSSEND REQUESTS EXCEPT PURGE OR FLUSH ARE INVALID FOLLOWING SWSFILE(SEND) REQUEST HLV7232THTTP RESPONSE BUFFER LIMIT (limit) EXCEEDED - SWSSEND WILL ISSUE USER ABEND X'722' HLV7233THTTP RESPONSE BYTE LIMIT (limit) EXCEEDED - SWSSEND WILL ISSUE USER ABEND X'722'(1826) HLV7240T USER-SPECIFIED CONTENT-LENGTH DIFFERENT THAN CALCULATED LENGTH. USER LENGTH = length, CALCULATED LENGTH = lengthHLV7250EOPISTBRU FUNCTION TERMINATED: rsn HLV7251TUNKNOWN OR INVALID COOKIE FOUND. errdesc : cookie HLV7252TONE OR MORE INVALID COOKIE VALUE FOUND. cfield : val HLV7253TINVALID COOKIE FORMAT count INVALID VARIABLES FOUND: value HLV7254T TIMESTAMP UNRECOGNIZABLE IN RFC1123, RFC850 OR ANSI C ASCTIME() FORMAT time HLV7255TVALUE OF varname IS IMPROPERLY ENCODED: reason HLV7300IInvalid command syntax: syntaxerr HLV7301Ssubsys is an invalid subsystem name HLV7302IParser routine (OPSXPR) failed with RC=rcodeHLV7303Sobject IS AN INVALID OBJECT FOR verbHLV7304Ioperand KEYWORD MUST BE SPECIFIED FOR verb entity STATEMENT HLV7305Ioperand KEYWORD MUST reason - SHOULD BE opertypeHLV7306IEITHER operand OR operand KEYWORD MUST BE SPECIFIED FOR verb entity STATEMENT HLV7307Ioperand KEYWORD INVALID FOR verb entity STATEMENT HLV7308IONLY operand KEYWORD ALLOWED FOR verb entity STATEMENT HLV7309Ioperand KEYWORD MUST BE value additinfo HLV7310Scmdname IS AN INVALID cmdtype COMMAND HLV7311Scmdname subsystem subsys is not active HLV7312Sverb entity STATEMENT FAILED WITH RC = rcodeHLV7313S Authorization check failed for verb entity statement HLV7314Sparmname is not a valid product parameter name HLV7315Sparmval is not a valid value for parmnameHLV7316Eentity value does not exist HLV7317Eentity value is already defined HLV7318SINVALID UPDATE ATTEMPT FOR entity HLV7319IDDNAME ddname is not allocated to product address space HLV7320I DSNAME(dsname) MUST BE A PDS(E) DATA SET HLV7321IRULESET indicator NOT rsnameHLV7322Hjobname HAS QUEUED RULESET(rsname) indicator FOR PROCESSING BY SEF HLV7323H SUPERVISOR STATE REQUIRED FOR verb entity COMMAND HLV7324Ioperand KEYWORD CONTAINS INVALID CHARACTER(S) AT OFFSET offset OF THE STRING HLV7325Eoperand IS INVALID IN COMBINATION WITH operand FOR verb entity STATEMENT HLV7326Eoperand MUST BE SPECIFIED IN COMBINATION WITH operand FOR verb entity STATEMENT HLV7327Eoperand VALUE MUST BE errdesc THAN operand FOR verb entity STATEMENT HLV7328Eoperand VALUE val INVALID - errdesc FOR verb entity STATEMENT HLV7329SNot configured for verb entity statement. HLV7330Srsname RULESET DEFINITION REJECTED - additinfoHLV7331Srsname SHARED FILE DEFINITION REJECTED - additinfoHLV7333T Authorization check failed for verb entity statement HLV7400Tvarname INVALID GLVSTATE. VARIABLE - rsn additinfoHLV7401Tsetname DOES NOT EXIST AND CANNOT BE service HLV7402Tval IS NOT A VALID VALUE FOR THE varname VARIABLE HLV7403Tsetname IS A READ-ONLY VARIABLE AND CANNOT BE UPDATED HLV7404TGLVSTATE.setname MUST BE ACTIVE BEFORE UPDATE TO varnameHLV7405Tvarname REQUIRES A NUMERIC VALUE - FOUND valHLV7406Tvarname ADJUSTED FROM val TO MINIMUM VALUE OF minval for %4 HLV7407Tvarname1 IN varname2 MUST BE ALPHAMERIC, BEGIN ALPHA OR AN INTEGER 0-N HLV7408Tqualifier ALREADY EXISTS HLV7409T++++++ reqtype varname Diagnostic WWST Trace ++++++ HLV7410TSERVER TOKEN CREATE/DELETE SERVICE FAILED RC=rcode - GLVSTATE.setname UPDATE WILL FAIL HLV7411TREQUEST VARIABLE varname INVALID AUTOMATED STATE TRANSPORT - rsn HLV7412Tvarname BYPASSED BY ASMF - DUPLICATE GLVSTATE.setname SET ALREADY EXISTS HLV7413TVARIABLE varname DOES NOT CONTAIN A VALID SERVER TOKEN ID - rsn HLV7414Tvarname VARIABLE DOES NOT CONTAIN VALID INFORMATION TO RECONSTRUCT GLVSTATE.setname - rsn HLV7415TSERVER TOKEN ID (tknid) REUSED IMPROPERLY FOR GLVSTATE.setname1/GLVSTATE.setname2 SETS HLV7416T GLVSTATE.setname NOT RECONSTRUCTED FOR TOKENID=tknid DUE TO ERROR errdescHLV7417T AUTOMATED STATE MGMT MODULE (OPASMF) - INVALID PLIST plist HLV7418T 'GLVSTATE.setname' MUST EXIST BEFORE UPDATE TO varnameHLV7419TUPDATE TO csym NOT ALLOWED FOR GLVSTATE.collection COLLECTION WITH STATUS=statusHLV7420TUPDATE TO 'csym' NOT ALLOWED BECAUSE val EXCEEDS CURRENT SUBKEY COUNT OF count HLV7421TUPDATE TO 'csym' IGNORED BECAUSE GLVSTATE.collection IS A typeset TYPE SET WHICH DOES NOT USE HTTP COOKIES HLV7422TUPDATE TO 'csym' IGNORED BECAUSE GLVSTATE.collection IS A value TYPE SET WHICH DOES NOT USE SERVER-SIDE TOKENS HLV7423TVALUE ASSIGNED TO 'csym' TRUNCATED BECAUSE field MAXIMUM LENGTH IS size HLV7425TUPDATE OF 'csym' IGNORED - TOKEN WITH ID=tknid HAS ALREADY EXPIRED HLV7426Tsetname HAS BEEN RESET HLV7427TNO "SET-COOKIE:" SENT FOR GLVSTATE.setname - COOKIE WOULD EXCEED 4K MAX. SIZE HLV7428TERROR WHILE BUILDING SET-COOKIE: RESPONSE FOR GLVSTATE.setname - RC=rcodeHLV7429TVARIABLE varname CONTAINS INVALID SERVER TOKENID ID WHICH MAY BE SPOOF ATTEMPT (ID=tknid) HLV7500Imsgtext HLV7501Wmsgtext HLV7502Smsgtext HLV7503Hmsgtext HLV8000EJava™ JVM feature is not configured. HLV8002EUnable to get the JVM Profile List from the Local Registry. HLV8003EUnable to build JVM Profile List. HLV8004EUnable to allocate latch for JVM profile. HLV8900Eerrdesc additinfoHLV8901Ttracedesc additinfoHLV8902Werrdesc additinfoHLV8903Ttracedesc additinfoHLV8904Werrdesc additinfoHLV8905Eerrdesc additinfoHLV9000H modname/funcode execution msgtext HLV9001I Subsystem subsys termination complete HLV9002E Subsystem subsys termination incomplete HLV9008SABEND ERROR abcode-rsncode AT modname+offset HLV9100TINVALID COMBINATION OF ./ or ../ in pathnameHLV9504Eservice OF desc FAILED, RC=rcode, DETECTED AT addrHLV9505Ierrdesc HLV9506Sservice OF desc FAILED, RC=rcode, DETECTED AT addrHLV9507EDATA SET dsname DOES NOT EXIST - LOCATE OF dsname FAILED, RC=rcode, REASON=rsncode HLV9508EOBTAIN OF FORMAT1 DSCB FOR DSNAME dsname VOLUME Vid FAILED, RC = rcode, REASON CODE = rsncodeHLV9509EOBTAIN OF FORMAT1 DSCB FOR DSNAME dsname VOLUME Vid FAILED BECAUSE DATA SET IS MIGRATED HLV9511Eservice OF desc FAILED, RC=rcode, RS=rsncode, DETECTED AT addrHLV9513EUnknown I/O reqcd, diaginfoHLV9990ImsgtextHLV9998S TEXTMERGE (MSGID=M998) PROCESSING FAILURE REASON=rsncode HLV9999SmsgtextFEC801EPgm: program name Stmt: statement Type: typeFEC802EAn invalid return code of code was encountered on function function. The error message text follows: text FEC803EThe first character of the command is not a dash. Correct the syntax of the DB2® command and resubmit.FEC804Emessage_textFEC901EThe default load library could not be located.FEC902EA DB2® subsystem ID has to be entered for processing.FEC903EThe default GDG base data set name could not be located.FEC904EThe specified data set could not be opened for I/O.FEC905EAn unexpected return code from VSAM was encountered while doing a read of the control file. RC1=rc RC2=rcFEC906IThe control file record for DB2® subsystem ssid has been successfully updated.FEC907EAn unexpected return code from VSAM was encountered while doing an update operation of the control file. RC1=rc RC2=rcFEC908IThe control file record for DB2® subsystem sys has been successfully added.FEC909EInvalid value. Valid options are 1 and 2.FEC910EAn unexpected return code from VSAM was encountered while doing an add operation to the control file. RC1=rc RC2=rcFEC911EThe (F)IND command was entered but no parameters were specified. FEC912IThe requested find string was not found. FEC913IThe control file record has been successfully updated.FEC914EAn unknown column was specified using the SORT command.FEC915ESORT is not supported for the specified column.FEC916ESort column not entered. Column name or number must be specified.FEC917EPut an ending quote at the end of the string.FEC918CHARS string not found. Press PF5 to continue from top.FEC919chars foundstr not found. Press PF5 to continue from bottom.FEC920EFile tailoring open returned a file tailoring already in progress conditionFEC921EFile tailoring open returned the output file already in use condition -- ENQ failedFEC922EFile tailoring open returned the skeletal file or output file not allocated conditionFEC923EFile tailoring open returned a severe error conditionFEC924EFile tailoring open returned an unknown code -- severe errorFEC925EFile tailoring close returned a file not open condition -- severe errorFEC926EFile tailoring close returned an output file in use conditionFEC927EFile tailoring close returned a skeletal file or output file not allocated conditionFEC928EFile tailoring close returned a severe errorFEC929EFile tailoring close returned an unknown code -- severe errorFEC930EFile tailoring close returned an output member exists in the output library and NOREPL was specifiedFEC931EFile tailoring include returned a skeleton does not exist conditionFEC932EFile tailoring include returned a skeleton in use -- ENQ failed conditionFEC933EFile tailoring include returned a data truncation or skeleton library or output file not allocated conditionFEC934EFile tailoring include returned a severe error conditionFEC935EFile tailoring include returned an unknown condition -- severe errorFEC936EAllocation error - The ISPFILE DD is already allocated and cannot be deallocated - Process not completedFEC937EAllocation Error - An error was encountered allocating the ISPWRK1 or ISPWRK2 DD - Process not completedFEC938EField Required - The data set entered is a partitioned data set and the member name is requiredFEC939EThe only valid values are "T" for tracks and "C" for cylindersFEC940EThe specified data set could not be found in the MVS™ catalog.FEC941EThe RFIND key works only after a FIND character string is entered.FEC942EInvalid Sort number. Enter a valid digit.FEC943ESame Sort number entered twiceFEC944ESort sequence skips a number.FEC945EInvalid Dir entered. Must be A or D (ascending/descending).FEC946EDir not valid without Ord.FEC947EMax Sort Columns exceeded. Sorting first 10 columns.FEC948EFix Columns cannot exceed screen size.FEC950EInvalid selection character. "F" and "U" are valid.FEC951EInvalid entry. Must be numeric.FEC952EInvalid entry for fixed column.FEC953EInvalid entry for unfixed column.FEC954EInvalid value entered for column size: non-numeric data.FEC955EInvalid value entered for column size: out of range.FEC956ETotal fixed column sizes cannot exceed screen size.FEC957ENew configuration makes this column size invalid.FEC958EColumn does not fit in unfixed area in new configuration.FEC959ENew configuration makes this column size invalid.FEC960EInvalid fixed selections. Would not leave enough space for this column.FEC962EDuplicate Cmd values entered.FEC963ECursor not on data element.FEC964EInvalid scroll amount for CRIGHT. Must be numeric.FEC965EInvalid scroll amount for CLEFT. Must be numeric.FEC966EInvalid parameter to ICRIGHT; must be numeric.FEC967EParameter to ICRIGHT too long. Invalid.FEC968EParameter to ICRIGHT is zero. Invalid.FEC969EICRIGHT: unspecified column.FEC971EICRIGHT: Column number specified is too big.FEC972EInvalid parameter to ICLEFT; must be numeric.FEC973EParameter to ICLEFT too long. Invalid.FEC974EParameter to ICLEFT is zero. Invalid.FEC975EICLEFT: unspecified column.FEC976EColumn selected not sortable. Sort selection list presented.FEC977EICLEFT: Column number specified is too big.FEC978EInvalid column number specified for SORT (not numeric).FEC979EInvalid column number specified. Too many digits.FEC980EInvalid column number specified: zero.FEC981EInvalid column number specified: out of range.FEC982EInvalid view. View adjusted.FEC983EInvalid view. View deleted.FEC984EUnexpected return code from TBSTATS: rcFEC985EView Library not allocated.FEC986ETBCREATE failed. RC=rcFEC987ETBOPEN failed. RC=rcFEC988ETBGET failed. RC=rcFEC989ETBMOD failed. RC=rcFEC990ETBCLOSE failed. RC=rcFEC991ETBDELETE failed. RC=rcFEC992EInvalid selection.FEC993IPermanent view not supported.FEC994EInvalid row number.FEC995EInvalid column number.FEC996EInvalid digits.FEC997EToo many digits.FEC998EZero parameter invalid.FEC999EInvalid parameter count: must be either two or zero parms.FECA900EInvalid Column Function value. Valid values: 1, 2, 3, 4FECA901EInvalid Permanent View value. Valid values: Y, NFECA902EInvalid Reset View value. Valid values are Y, NFECA903EInvalid Stop Sorting value. Valid values: Y, NFECA904EInvalid command in FORM displayFECA905EFORM command not supported from CSETUP functionFECA906EInvalid parameter for NROW. Must be numeric.FECA907EInvalid parameter for PROW. Must be numeric.FECA908EInvalid parameter for NROW. Too many digits.FECA909EInvalid parameter for PROW. Too many digits.FECA910ECSETUP command not supported from FORM functionFECA911EInvalid ICR command. Use RIGHT command.FECA912EInvalid ICL command. Use LEFT command.FECA913EFormat mix data element not updated.FECA914EFORM command not supported from FORM functionFECA915EFORM PF keys set; NROW = nrow PROW = prowFECA916EInvalid CNUM parm. Valid parms are ON, OFF, or blank.FECA917EReport width for print too large.FECA918Estring not found. Press PF5 to continue from top.FECA920IChars chars found n timesFECA921IChars chars not found on any linesFECA922ISearch for CHARS chars was successful.FECA923ECheck for misspelled keywords or embedded blanks in search string.FECA924Estring and string cannot both be specified for FIND command.FECA925EPut quotes (" ") around the string of characters to be displayed.FECA926EMaximum parameter length is 80FECA927EInvalid COLS parm. Valid parms are ON, OFF, or blankFECA930INo columns eligible for resizing.FECA931INo columns eligible for sortingFECA932ITBMOD failed. RC=rcFECA933EInvalid column name: missing quoteFECA934EMore than 9 columns specifiedFECA935EInvalid column nameFECA936EInvalid row selection characterFECA937EOnly one row selection allowedFECA938EInvalid commandFECA939ERead of control file failedFECA940EInvalid DB2® Control data setFECA942EIFCARC1=return code IFCARC2=reason codeFECA943EInvalid commandFECA944IEmpty HistoryFECA945EInvalid history size limitFECA946INo DB2® command history output library allocatedFECA947INo DB2® command history input library allocatedFECA948ETBOPEN failed. RC=return codeFECA949EInvalid commandFECA950ENo SSIDs in control fileFECA951IHistory clearedFECA952EUnable to list data sharing members. Display failedFECA953IZero data sharing members foundFECA954EInvalid commandFECA955INo member selectedFECA956EInvalid row selection characterFECA957EOnly one row selection allowedFECA958EInvalid row selection characterFECA959EOnly one row selection allowedFECA960ECannot list commands without SSIDFECA961EInvalid row selection characterFECA962EOnly one row selection allowedFECA963EInvalid commandAccelerator Loader server reason codesThe Accelerator Loader server produces reason codes that are used for troubleshooting TCP/IP and DRDA related issues. Parent topic: Troubleshooting