This section summarizes the changes to the CICS®-supplied utilities across supported CICS releases. Use this information to plan the impact of
upgrading from one release to another.
If you are upgrading from an end-of-service release,
you can find information about the changes that are relevant to those releases in Summary of changes from end-of-service releases.
Highlights of changes across supported releases of CICS TS
Table 1 lists changed utilities in each supported CICS TS release. The links take you to the relevant tables that describe changes to specific utilities by release.
Note: Dump utilities DFHDU
xxx and DFHPD
xxx and the CICS trace utility print program DFHTU
xxx are renamed with a new release identifier every
release, so they are not specifically listed in
Table 1 unless they have other functional changes.
Table 1. Highlights of changed CICS utilities across supported CICS TS releases
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
|
|
|
|
|
DFH0STAT
Table 2 describes changes to the utility itself and introduction of new reports by release of CICS TS.
Table 3 through Table 16 summarize changes by report, across supported releases
of CICS TS.
Table 2. Changes to the DFH0STAT utility and
introduction of new reports, by release
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| NEW REPORTS: User report
Security report
MVS user region and extended user region storage report
|
NEW REPORT: Policy report
|
CHANGED: User region, extended user region and MEMLIMIT storage
monitoring report is renamed from MVS user region and extended user region
storage report.
|
|
Table 3. DFH0STAT - Data Tables Storage
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELDS:
- Entries + Index - Storage Allocated
- Entries + Index - Storage In-Use
REMOVED FIELDS:
- Total - Storage Allocated
- Total - Storage In-Use
|
|
|
Table 4. DFH0STAT - Db2 Entries report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELD:
|
|
|
Table 5. DFH0STAT - JVMSERVERs
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELDS:
- JVMSERVER code cache memory used
- JVMSERVER code cache memory alloc
- JVMSERVER data cache memory used
- JVMSERVER data cache memory alloc
- JVMSERVER class storage memory used
- JVMSERVER class storage memory alloc
- JVMSERVER classcache size
- JVMSERVER classcache free
|
|
|
Table 6. DFH0STAT - Security report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
|
NEW FIELDS:
- Failed authorizations NOLOG NOTAUTH
- Failed authorizations NOLOG NOTFND
|
|
Table 7. DFH0STAT - Storage above 16 MB (31-bit
storage) report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| NEW FIELDS: None |
NEW FIELDS:
- User Region limit established
- Current User Region storage
unallocated
- Current free storage above User
Region limit
|
|
|
| CHANGED FIELDS: None |
CHANGED FIELDS:
- Private Area size above 16MB: the field name is changed from Private Area Region size above
16MB
- Peak LSQA/SWA storage allocated: the field name is changed from Max LSQA/SWA storage allocated
above 16MB (SYS), and its field description is updated accordingly.
- Peak User Region storage allocated: the field name is changed from Max User storage allocated
above 16MB (EXT), and its field description is updated accordingly.
|
|
|
REMOVED FIELDS:
- Requests for MVS storage causing
waits
- Total time waiting for MVS storage
|
REMOVED FIELDS:
- Private Area Storage available above 16MB
|
|
|
Table 8. DFH0STAT - Storage above 2 GB (64-bit
storage) report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
REMOVED FIELDS:
- MEMLIMIT minus allocated to Private Memory Objects
- MEMLIMIT minus usable within Private Memory Objects
|
|
|
Table 9. DFH0STAT - Storage below 16 MB (24-bit
storage) report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELDS:
- User Region limit established
- Current User Region storage
unallocated
- Current free storage above User
Region limit
|
|
|
| |
CHANGED FIELDS:
- Private Area size below 16MB: the field name is changed from Private Area Region size below
16MB.
- Peak LSQA/SWA storage allocated (SYS): the field name is changed from Max LSQA/SWA storage
allocated below 16MB (SYS), and its field description is updated accordingly.
- Peak User Region storage allocated (VIRT): the field name is changed from Max User storage
allocated below 16MB (VIRT), and its field description is updated accordingly.
|
|
|
| |
REMOVED FIELDS:
- Private Area Storage available below 16MB
- Region size established from REGION= parameter
- RTM
- System Use
|
|
|
Table 10. DFH0STAT - System status
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
NEW FIELDS added to Monitoring section:
- Frequency
- MCT program name
|
|
|
|
Table 11. DFH0STAT - TCP/IP report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELDS:
- Maximum parallel TLS handshakes
- Current parallel TLS
handshakes
- Peak parallel TLS handshakes
- Maximum waiting TLS handshakes
- Current waiting TLS handshakes
- Peak waiting TLS handshakes
- Inbound: TLS 1.1
- Inbound: TLS 1.2
- Inbound: TLS 1.3
- Inbound: Total
- Outbound: TLS 1.1
- Outbound: TLS 1.2
- Outbound: TLS 1.3
- Outbound: Total
- Inbound: AT-TLS SSL 3
- Inbound: AT-TLS 1.0
- Inbound: AT-TLS 1.1
- Inbound: AT-TLS 1.2
- Inbound: AT-TLS 1.3
- Outbound: AT-TLS SSL 3
- Outbound: AT-TLS 1.0
- Outbound: AT-TLS 1.1
- Outbound: AT-TLS 1.2
- Outbound: AT-TLS 1.3
|
|
|
| |
CHANGED FIELDS:
- Current number of outbound sockets:
Its source field is changed to SOG-CURR-OUTB-SOCKETS.
- Peak number of outbound sockets: Its source field is changed to SOG-PEAK-OUTB-SOCKETS.
|
|
|
| |
REMOVED FIELDS:
- SOG-CURR-PERS-OUTB-SOCKETS
- SOG-PEAK-BOTH-OUTB-SOCKETS
- SOG-PEAK-PERS-OUTB-SOCKETS
- SOG-PERS-OUTBOUND-CREATED
|
|
|
Table 12. DFH0STAT - TCP/IP services
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| NEW FIELD:
|
|
|
|
Table 13. DFH0STAT - Temporary Storage
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELDS:
- Current auxiliary storage usage
%
- Peak auxiliary storage usage %
|
|
|
Table 14. DFH0STAT - Transactions
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELD:
|
|
|
Table 15. DFH0STAT - Transaction Classes
report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELD:
|
NEW FIELD:
|
|
Table 16. DFH0STAT - User region, extended user
region and MEMLIMIT storage monitoring report
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| NEW REPORT with report name MVS
user region and extended user region storage report |
|
CHANGED: Renamed to User region, extended user region and MEMLIMIT storage
monitoring report.
NEW:
Reports on z/OS®
MEMLIMIT storage in the 64-bit addressing range, under the heading
MEMLIMIT.
|
|
| |
|
NEW FIELDS:
|
|
DFHEISUP
Table 17
summarizes changes to DFHEISUP, Load module scanner by
release of CICS TS.
Table 17. Changes to DFHEISUP by
release
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
CHANGED: DFHEISUP is changed to be RMODE(ANY) instead of RMODE(24). This change allows
DFHEISUP to use 31-bit virtual storage (above 16 MB but below 2 GB). |
|
|
Dump utilities DFHPDxxx
Table 18 summarizes changes to the Dump utilities DFHPDxxx by release of CICS TS.
Dump utilities DFHPDxxx are renamed with new release identifier every release, so this is not
specifically stated again in Table 18.
Table 18. Changes to DFHPDxxx by release
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| CHANGED: The TRS KE_NUM parameter enhanced to format out the most recent trace
entries information for the specified task.
|
|
|
|
DFHSTUP
Table 19 describe changes to the utility itself (for example, control parameters) and introduction of new types of statistics by release of CICS TS.
Table 20 through Table 32 summarize changes by type of statistics, across supported releases of CICS TS. The DFHSTUP name is used to identify statistic fields.
Table 19. Changes to the DFHSTUP utility and
introduction of new types of statistics, by release
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| NEW TYPE:
|
|
|
|
| CHANGED: New option SECURITY added to SELECT TYPE and IGNORE TYPE control
parameters.
|
|
|
|
Table 20. DFHSTUP - CICS
Db2 statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
CICS
Db2® resource
statistics
|
|
|
| |
|
|
|
Table 21. DFHSTUP - Cipher
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
Resource statisticsNEW FIELDS:
- Number
- TLS Inbound
- TLS Outbound
- AT-TLS Inbound
- AT-TLS Outbound
|
|
|
Table 22. DFHSTUP - ISC/IRC system and mode entry
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
|
|
|
Table 23. DFHSTUP - JVM server
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
JVMSERVER resource statisticsNEW FIELDS:
- JVMSERVER code cache memory used
- JVMSERVER code cache memory alloc
- JVMSERVER data cache memory used
- JVMSERVER data cache memory alloc
- JVMSERVER class storage mem used
- JVMSERVER class storage mem alloc
- JVMSERVER classcache size
- JVMSERVER classcache free
|
|
|
Table 24. DFHSTUP - Monitoring domain
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
Global statisticsNEW FIELDS:
- RMI Option
- Application naming
- MCT program name
- Frequency
|
|
|
|
Table 25. DFHSTUP - Security domain
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
|
Global statisticsNEW FIELDS:
- Failed authorizations NOLOG NOTAUTH
- Failed authorizations NOLOG NOTFND
|
|
Table 26. DFHSTUP - Storage manager
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
Storage manager global statisticsNEW FIELDS for user region and
extended user region storage:
- Last monitor sample time
- The following fields are reported for user region (24-bit) storage and extended user region
(31-bit) storage respectively.
- State
- Current unallocated total
- LWM unallocated total
- Current unallocated largest
contiguous area
- LWM unallocated largest contiguous area
- Last date and time SOS
- Time tasks waited because SOS
- Current tasks waiting because
SOS
- Peak tasks waiting because SOS
- Total waits because SOS
|
|
Storage manager global statisticsNEW FIELDS for user region storage
and extended user region storage:
NEW: Reports on z/OS MEMLIMIT storage in
the 64-bit addressing range, under the heading MEMLIMIT:
- State
- Current unallocated
- LWM unallocated
- Last date and time SOS
- SOS duration
- Times SOS
CHANGED: The report name is changed to User region, extended user
region and MEMLIMIT storage monitoring from MVS user region and extended user region storage.
|
|
Table 27. DFHSTUP - Temporary storage
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
Global statisticsNEW FIELDS:
- Current aux. temp storage usage
%
- Peak aux. temp storage usage %
|
|
|
Table 28. DFHSTUP - TCP/IP global
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
NEW FIELDS:
- Maximum parallel TLS handshakes
- Current parallel TLS
handshakes
- Peak parallel TLS handshakes
- Maximum waiting TLS handshakes
- Current waiting TLS handshakes
- Peak waiting TLS handshakes
- Inbound: TLS 1.1
- Inbound: TLS 1.2
- Inbound: TLS 1.3
- Inbound: Total
- Outbound: TLS 1.1
- Outbound: TLS 1.2
- Outbound: TLS 1.3
- Outbound: Total
- Inbound: AT-TLS SSL 3
- Inbound: AT-TLS 1.0
- Inbound: AT-TLS 1.1
- Inbound: AT-TLS 1.2
- Inbound: AT-TLS 1.3
- Outbound: AT-TLS SSL 3
- Outbound: AT-TLS 1.0
- Outbound: AT-TLS 1.1
- Outbound: AT-TLS 1.2
- Outbound: AT-TLS 1.3
- Inbound: Full
- Inbound: Abbreviated
- Outbound: Full
- Outbound: Abbreviated
|
|
|
| |
CHANGED FIELDS:
- SOG_CURR_OUTB_SOCKETS: Its DFHSTUP name is changed to Current number of outbound
sockets.
- SOG_PEAK_OUTB_SOCKETS: Its DFHSTUP name is changed to Peak number of outbound
sockets.
|
|
|
| |
REMOVED FIELDS:
- SOG_CURR_PERS_OUTB_SOCKETS
- SOG_PEAK_BOTH_OUTB_SOCKETS
- SOG_PEAK_PERS_OUTB_SOCKETS
- SOG_PERS_OUTBOUND_CREATED
|
|
|
Table 29. DFHSTUP - TCP/IP services resource
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| NEW FIELD:
|
|
|
|
Table 30. DFHSTUP - Transaction class (TCLASS)
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
Transaction class resource statistics
|
Transaction class resource statistics
|
|
| |
Transaction class summary resource statisticsNEW FIELDS:
- First at Max Act
- Last at Max Act
|
|
|
Table 31. DFHSTUP - Transaction
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
| |
Transactions resource statistics
|
|
|
Table 32. DFHSTUP - User domain
statistics
| 5.6 |
6.1 |
6.2 |
CICS TS 6.3 |
Global statisticsNEW FIELDS:
- Delete count due to sign off
- Delete count due to ENF
- Current instances in directory
- Peak instances in directory
- Current instances in timeout
- Peak instances in timeout
- ENF events matched
- ENF events not matched
|
|
|
|