BFGAG0001 - BFGAG9999

BFGAG0001E: The agent name that you have specified is too short. The minimum number of characters allowed in an agent name is <insert_0>.
Severity: 20 : Error
Explanation: The agent name that you have specified was too short. Specify a longer agent name.
Response: Specify an agent name that is at least as long as the length specified in the message.

BFGAG0002E: The agent name that you have specified is too long. The maximum number of characters allowed in an agent name is <insert_0>.
Severity: 20 : Error
Explanation: The agent name that was specified was too long. Specify a shorter agent name.
Response: Specify an agent name that is no longer than the maximum length specified in the message.

BFGAG0003E: The agent name that you have specified contains characters that are not permitted in an agent name.
Severity: 20 : Error
Explanation: Agent names can contain characters that are valid for IBM MQ object names only. Consult the IBM MQ product documentation for more information about which characters are valid as object names.
Response: Specify an agent name that contains only characters that are valid for an IBM MQ object name.

BFGAG0004E: You have specified an incorrect number of arguments on the command line.
Severity: 20 : Error
Explanation: This command accepts a single command line argument only.
Response: Specify a single command line argument only.

BFGAG0005E: An internal error has occurred. The argument was <insert_0>.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0006E: Cannot load agent configuration. Ending agent process.
Severity: 20 : Error
Explanation: The agent was unable to load its configuration and cannot continue running. The agent process will end.
Response: Examine previous error messages to determine the nature of the configuration problem. Use this information to correct the problem, if possible. Otherwise contact the IBM support center if you need further assistance.

BFGAG0007E: An internal error occurred that prevented process startup. The exception was <insert_0>.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0008E: The property named <insert_0> was either omitted or has no value in the agent.properties file. The agent process will now end.
Severity: 20 : Error
Explanation: The named property must be present and correctly specified in the configuration file, otherwise the process cannot start.
Response: Use the information in the message to determine which changes are needed in the configuration file specified. Update the configuration file with these changes and restart this process.

BFGAG0009I: Transferring file <insert_0> to <insert_1> (transfer id: <insert_2>).
Severity: 0 : Information
Explanation: Information.
Response: None.

BFGAG0010E: Transfer (<insert_0>) failed because of a file reader exception <insert_1>.
Severity: 20 : Error
Explanation: The file transfer was unsuccessful because of a problem reading the source file.
Response: Look at the reason for the failure to understand why the transfer failed and take the appropriate action as necessary.

BFGAG0011I: Transfer (<insert_0>) complete. <insert_1>
Severity: 0 : Information
Explanation: Information.
Response: None.

BFGAG0012I: The coordination queue manager has not been specified in the properties file. The agent's presence will not be published.
Severity: 0 : Information
Explanation: The coordination queue manager has not been specified in the properties file so the agent's presence will not be published.
Response: Add the missing property value if you require the agent's presence to be published.

BFGAG0014W: Transfer of file <insert_0> to <insert_1> not started because the system is shutting down.
Severity: 10 : Warning
Explanation: The file transfer was unsuccessful because the system is shutting down.
Response: No action required.

BFGAG0017W: The audit message for transfer ID <insert_0> failed to publish the STARTED message.
Severity: 10 : Warning
Explanation: An attempt to publish an audit message to the coordination queue manager has failed.
Response: Ensure that the coordination queue manager properties have been specified correctly in the properties file. Ensure that the coordination queue manager is running.

BFGAG0018W: The audit message for transfer ID <insert_0> failed to publish the PROGRESS message.
Severity: 10 : Warning
Explanation: An attempt to publish an audit message to the coordination queue manager has failed.
Response: Ensure that the coordination queue manager properties have been specified correctly in the properties file. Ensure that the coordination queue manager is running.

BFGAG0019W: The audit message for transfer ID <insert_0> failed to publish the COMPLETED message.
Severity: 10 : Warning
Explanation: An attempt to publish an audit message to the coordination queue manager has failed.
Response: Ensure that the coordination queue manager properties have been specified correctly in the properties file. Ensure that the coordination queue manager is running.

BFGAG0020W: An internal error has occurred. An audit message for transfer ID <insert_0> has been received in an unexpected sequence. An Audit Started must be performed first
Severity: 10 : Warning
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0021W: An internal error has occurred. An audit message for transfer ID <insert_0> has been received in an unexpected sequence. An Audit Started must be performed first.
Severity: 10 : Warning
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0023E: The agent is already running. An exclusive lock cannot be acquired on file: <insert_0>. This agent instance cannot continue and will end.
Severity: 20 : Error
Explanation: This agent process has detected that another instance of the agent is running. Only one instance of an agent process can be running at any one time, so this agent process will end. The mechanism used to detect that another instance of the agent process is running is an exclusive lock on the named file.
Response: No action is required.

BFGAG0024E: The agent cannot open file ''<insert_0>'' and will end. The file could not be opened because of: <insert_1>.
Severity: 20 : Error
Explanation: The agent process could not open the specified file, for the specified reason. The agent process must be able to access this file in order to start successfully. The agent process will now end.
Response: Use the information in the message to investigate why the agent cannot open the specified file. If possible, resolve the problem and reissue the command to start the agent. If necessary, contact the IBM support center if you need further assistance to resolve this problem.

BFGAG0025I: The agent process has ended with return code <insert_0>.
Severity: 0 : Information
Explanation: The agent process has ended with the specified reason code.
Response: No action is required.

BFGAG0026I: The agent process is starting.
Severity: 0 : Information
Explanation: The agent process is starting.
Response: No action is required.

BFGAG0027W: Waiting for queue manager "<insert_0>" to become available.
Severity: 10 : Warning
Explanation: An attempt to connect to the queue manager has failed and the agent is now waiting for the queue manager to become available.
Response: No action is required.

BFGAG0028I: Connected to queue manager "<insert_0>".
Severity: 0 : Information
Explanation: This agent has successfully made a connection to the queue manager.
Response: No action is required.

BFGAG0029E: An internal error has occurred. There is already a thread running this method.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0030E: An internal error has occurred. The method has been invoked before main processing.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0031E: An internal error has occurred. The method has been invoked using the thread responsible for main processing.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0032W: The agent received MQI reason code <insert_0> when trying to open queue ''<insert_1>'' on the default local queue manager.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot open the specified queue belonging to the default local queue manager. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0033W: The agent received MQI reason code <insert_0> when trying to open queue ''<insert_1>'' on local queue manager ''<insert_2>''.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot open the specified queue belonging to the specified local queue manager. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0034W: The agent received MQI reason code <insert_0> when trying to open queue ''<insert_1>'' on the default queue manager with connection name ''<insert_2>'' and channel ''<insert_3>''. The agent will try the operation again every <insert_4> seconds.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot open the specified queue belonging to the remote default queue manager. The agent will keep trying the operation again at the specified interval. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0035W: The agent received MQI reason code <insert_0> when trying to open queue ''<insert_1>'' on the queue manager ''<insert_2>'' with connection name ''<insert_3>'' and channel ''<insert_4>''. The agent will try the operation again every <insert_5> seconds.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot open the specified queue belonging to the specified remote queue manager. The agent will keep trying the operation again at the specified interval. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0036E: The agent received MQI reason code <insert_0> when opening queue ''<insert_1>'' on the default local queue manager. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to open the specified queue belonging to the default local queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0037E: The agent received MQI reason code <insert_0> when opening queue ''<insert_1>'' on local queue manager ''<insert_2>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to open the specified queue belonging to the specified local queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0038E: The agent received MQI reason code <insert_0> when opening queue ''<insert_1>'' on the default remote queue manager with connection name ''<insert_2>'' and channel ''<insert_3>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to open the specified queue belonging to the default remote queue manager on the specified host. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0039E: The agent received MQI reason code <insert_0> when opening queue ''<insert_1>'' on the remote queue manager ''<insert_2>'' with connection name ''<insert_3>'' and channel ''<insert_4>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to open the specified queue belonging to the specified remote queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0040E: An internal error occurred. The MQI reason code is <insert_0>, the queue is <insert_1>, the queue manager is <insert_2> on host <insert_3>, port <insert_4> and channel <insert_5>.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0041E: The agent cannot establish a bindings mode connection to the default queue manager and will now end. The reason is: <insert_0>
Severity: 20 : Error
Explanation: The agent could not establish a bindings mode connection to the default queue manager, for the specified reason. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Use the information in the message to diagnose the problem. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0042E: The agent cannot establish a bindings mode connection to queue manager ''<insert_0>'' and will now end. The reason is: <insert_1>
Severity: 20 : Error
Explanation: The agent could not establish a bindings mode connection to the specified queue manager for the specified reason. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Use the information in the message to diagnose the problem. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0043E: The agent cannot establish a client mode connection to the default queue manager with connection name ''<insert_0>'' and using channel ''<insert_1>''. The agent will now end. The reason is: <insert_2>
Severity: 20 : Error
Explanation: The agent could not establish a client mode connection to the default queue manager for the specified reason. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Use the information in the message to diagnose the problem. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0044E: The agent cannot establish a client mode connection to queue manager ''<insert_0>'' with connection name ''<insert_1>'' and using channel ''<insert_2>''. The agent will now end. The reason is: <insert_3>
Severity: 20 : Error
Explanation: The agent could not establish a client mode connection to the specified queue manager, for the specified reason. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Use the information in the message to diagnose the problem. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0045W: A bindings transport mode connection cannot be established to the default queue manager. The reason code is <insert_0>.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot establish a bindings mode connection to the default queue manager because of the specified MQI reason code. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0046W: A bindings transport mode connection cannot be established to queue manager ''<insert_0>''. The reason code is <insert_1>.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot establish a bindings mode connection to the specified queue manager because of the specified MQI reason code. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0047W: A client transport mode connection cannot be established to the default queue manager with connection name ''<insert_0>'' and using channel ''<insert_1>''. The reason code is <insert_2>. The agent will try the operation again every <insert_3> seconds.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot establish a client mode connection to the default queue manager because of the specified MQI reason code. The agent will keep trying the operation again at the specified interval. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0048W: A client transport mode connection cannot be established to queue manager ''<insert_0>'' with connection name ''<insert_1>'' and using channel ''<insert_2>''. The reason code is <insert_3>. The agent will try the operation again every <insert_4> seconds.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot establish a client mode connection to the specified queue manager because of the specified MQI reason code. The agent will keep trying the operation again at the specified interval. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0049E: The agent received MQI reason code <insert_0> when establishing a bindings transport mode connection to the default queue manager. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to establish a bindings transport mode connection to the default queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0050E: The agent received MQI reason code <insert_0> when establishing a bindings transport mode connection to the queue manager ''<insert_1>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to establish a bindings transport mode connection to the specified queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0051E: The agent received MQI reason code <insert_0> when establishing a client transport mode connection to the default queue manager with connection name ''<insert_1>'' and using channel ''<insert_2>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to establish a client transport mode connection to the default queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0052E: The agent received MQI reason code <insert_0> when establishing a client transport mode connection to the queue manager ''<insert_1>'' with connection name ''<insert_2>'' and using channel ''<insert_3>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to establish a client transport mode connection to the specified queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0053E: An internal error has occurred. The reason code is <insert_0>, the queue manager is <insert_1> on host <insert_2>, port <insert_3> and channel <insert_4>.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0054I: The agent has established a bindings transport mode connection to the default queue manager. The agent is ready to be used for transfers.
Severity: 0 : Information
Explanation: The agent is connected to the specified queue manager. The agent is ready to be used for transfers.
Response: No action is required.

BFGAG0055I: The agent has established a bindings transport mode connection to queue manager ''<insert_0>''. The agent is ready to be used for transfers.
Severity: 0 : Information
Explanation: The agent is connected to the specified queue manager. The agent is ready to be used for transfers.
Response: No action is required.

BFGAG0056I: The agent has established a client transport mode connection to the default queue manager with connection name ''<insert_0>'' and channel ''<insert_1>''. The agent is ready to be used for transfers.
Severity: 0 : Information
Explanation: The agent is connected to the specified queue manager. The agent is ready to be used for transfers.
Response: No action is required.

BFGAG0057I: The agent has established a client transport mode connection to queue manager ''<insert_0>'' with connection name ''<insert_1>'' and channel ''<insert_2>''. The agent is ready to be used for transfers.
Severity: 0 : Information
Explanation: The agent is connected to the specified queue manager. The agent is ready to be used for transfers.
Response: No action is required.

BFGAG0058I: The agent has successfully initialized.
Severity: 0 : Information
Explanation: The agent has successfully initialized and is preparing to process transfers.
Response: No action is required.

BFGAG0059I: The agent has been successfully started.
Severity: 0 : Information
Explanation: The agent has been started and is processing transfers.
Response: No action is required.

BFGAG0060I: The agent has completed its current transfers and is now stopping.
Severity: 0 : Information
Explanation: A request to stop the agent has been received. All current transfers have been completed and the agent is now stopping.
Response: No action is required.

BFGAG0061E: The agent ended abnormally
Severity: 20 : Error
Explanation: The agent ended abnormally because of an error.
Response: Review previous error messages in the event log for details of the error.

BFGAG0062E: The agent has received MQI reason code ''<insert_0>''. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the reason code. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0063E: An internal error occurred. The exception is: <insert_0>
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0064E: The agent has detected an error condition that prevents the agent from continuing. The error message is: <insert_0>
Severity: 20 : Error
Explanation: The agent has received the specified error. The agent cannot continue processing after receiving this error. The agent process will end.
Response: Use the information in the error message to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0065E: The agent has received MQI reason code ''<insert_0>''. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0066E: An internal error occurred. The exception is: <insert_0>
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0067E: The agent cannot establish a bindings mode connection to the default queue manager and will now end. The agent cannot find a bindings library: <insert_0>
Severity: 20 : Error
Explanation: The agent could not establish a bindings mode connection to the default queue manager because the agent could not locate an appropriate bindings library. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the product documentation to determine how to configure the location that the bindings library is loaded from. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0068E: The agent cannot establish a bindings mode connection to queue manager ''<insert_0>'' and will now end. The agent cannot find a bindings library: <insert_1>
Severity: 20 : Error
Explanation: The agent could not establish a bindings mode connection to the specified queue manager because the agent could not locate an appropriate bindings library. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the product documentation to determine how to configure the location that the bindings library is loaded from. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0069E: The agent cannot establish a bindings mode connection to the default queue manager and will now end. The required libraries are not in the STEPLIB: <insert_0>
Severity: 20 : Error
Explanation: The agent could not establish a bindings mode connection to the default queue manager because the agent could not locate the required libraries. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the product documentation to determine how to configure the STEPLIB to reference the required libraries. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0070E: The agent cannot establish a bindings mode connection to queue manager ''<insert_0>'' and will now end. The required libraries are not in the STEPLIB: <insert_1>
Severity: 20 : Error
Explanation: The agent could not establish a bindings mode connection to the specified queue manager because the agent could not load the required libraries. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the product documentation to determine how to configure the STEPLIB to reference the required libraries. If possible, resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0071I: The agent has suspended its current transfers and is now stopping.
Severity: 0 : Information
Explanation: A request to stop the agent has been received. All active transfers have been suspended and the agent is now stopping. Any outstanding commands will be stopped if they do not complete after a short period of time.
Response: No action is required.

BFGAG0072E: The agent is unable to complete initialization because of a problem with SSL configuration: <insert_0>.
Severity: 20 : Error
Explanation: A request to start the agent could not be processed because of an SSL configuration issue. This problem prevented the agent from starting.
Response: Resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0073E: The agent is unable to complete initialization because of a problem with SSL configuration: <insert_0>.
Severity: 20 : Error
Explanation: A request to start the agent could not be processed because of an SSL configuration issue. This problem prevented the agent from starting.
Response: Resolve the problem and restart the agent. Otherwise contact the IBM support center if you need further assistance.

BFGAG0074E: The agent process does not have permission to read from or write to the specified transfer sandbox location "<insert_0>" and will end.
Severity: 20 : Error
Explanation: The agent would be unable to read or write any files and cannot continue running. The agent process will end.
Response: Examine previous error messages to determine the nature of the configuration problem. Use this information to correct the problem, if possible. Otherwise contact the IBM support center if you need further assistance.

BFGAG0075E: The agent process does not have permission to read from or write to any of the specified transfer sandbox locations and will end.
Severity: 20 : Error
Explanation: The agent would be unable to read or write any files and cannot continue running. The agent process will end.
Response: Examine previous error messages to determine the nature of the configuration problem. Use this information to correct the problem, if possible. Otherwise contact the IBM support center if you need further assistance.

BFGAG0076W: The agent process does not have permission to read from or write to the specified transfer sandbox location "<insert_0>", but will continue because other locations are available.
Severity: 10 : Warning
Explanation: The agent would be unable to read or write files to one of the given sandboxes.
Response: Examine previous error messages to determine the nature of the configuration problem. Use this information to correct the problem, if possible. Otherwise contact the IBM support center if you need further assistance.

BFGAG0078E: The license terms of IBM MQ Managed File Transfer for z/OS do not permit client transport mode connections to be used to connect an agent process to the queue manager.
Severity: 20 : Error
Explanation: Agents running on z/OS are not allowed to use client transport mode connections.
Response: Change the Agent's configuration to use bindings transport mode connections instead.

BFGAG0079E: The agent has received MQI reason code ''<insert_0>''. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the reason code. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0080E: An internal error occurred. The exception is: <insert_0>
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0081E: The agent has detected an error condition that prevents the agent from continuing. The error message is: <insert_0>
Severity: 20 : Error
Explanation: The agent has received the specified error. The agent cannot continue processing after receiving this error. The agent process will end.
Response: Use the information in the error message to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0082E: The agent process does not have permission to read from or write to the specified transfer sandbox location "<insert_0>" and will end. Additional information: <insert_1>
Severity: 20 : Error
Explanation: The agent would be unable to read or write any files and cannot continue running. The agent process will end.
Response: Examine previous error messages to determine the nature of the configuration problem. Use this information to correct the problem, if possible. Otherwise contact the IBM support center if you need further assistance.

BFGAG0083E: The agent''s transfer root directory ''<insert_0>'' is not a valid directory or the agent does not have the necessary permissions to use it. The process will end.
Severity: 20 : Error
Explanation: The agent would be unable to read or write any files specified with relative paths and cannot continue running. The agent process will end.
Response: Examine previous error messages to determine the nature of the configuration problem. Use this information to correct the problem, if possible. Otherwise contact the IBM support center if you need further assistance.

BFGAG0084I: An operator request to immediately shut down this agent has been received.
Severity: 0 : Information
Explanation: An operator shutdown request has been received from the system operator.
Response: No action is required.

BFGAG0085I: An operator request to immediately shut down this agent is being processed.
Severity: 0 : Information
Explanation: This agent is performing an immediate shutdown following an operator request.
Response: No action is required.

BFGAG0086I: An operator request to shut down this agent has been received.
Severity: 0 : Information
Explanation: An operator shutdown request has been received.
Response: No action is required.

BFGAG0087I: An operator request to shut down this agent is being processed.
Severity: 0 : Information
Explanation: An operator shutdown request is being processed.
Response: No action is required.

BFGAG0088E: Operator command <insert_0> is not valid
Severity: 20 : Error
Explanation: An invalid operator command was received by the agent
Response: Correct and re-enter the command.

BFGAG0089E: Invalid operator command <insert_0> ignored.
Severity: 20 : Error
Explanation: An invalid operator command has been ignored.
Response: Correct and re-enter the command.

BFGAG0090I: This agent has been configured as a protocol bridge MQMFT agent.
Severity: 0 : Information
Explanation: The agent has been successfully configured to operate as a protocol bridge MQMFT agent.
Response: No action is required.

BFGAG0091W: Invalid compression property value <insert_0> ignored.
Severity: 10 : Warning
Explanation: An invalid compression property has been ignored.
Response: Fix the compression property value in the agents property files.

BFGAG0092I: The ''<insert_0>'' file will be used to request JVM diagnostic information.
Severity: 0 : Information
Explanation: The JVM diagnostic service facility is enabled, which will help provide additional diagnostic information. For certain MQMFT agent environments, such as when running as a background process on Windows, the way of capturing JVM diagnostics is to have this facility enabled. JVM diagnostics should only be captured at the request of IBM service.
Response: No user action is necessary.

BFGAG0093W: A non-production service facility is enabled. The ''<insert_0>'' file will be used to request the generation of diagnostic trace.
Severity: 10 : Warning
Explanation: A non-production service facility is enabled, which will help provide additional diagnostic information. This product function should only be enabled at the request of IBM service.
Response: No user action is necessary.

BFGAG0094W: A non-production service facility is enabled. The ''<insert_0>'' file will be monitored to request that the agent process end.
Severity: 10 : Warning
Explanation: A non-production service facility is enabled, which will help provide additional diagnostic information. This product function should only be enabled at the request of IBM service.
Response: No user action is necessary.

BFGAG0097E: An internal error has occurred. Java diagnostic information cannot be generated because of: <insert_0>.
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0098I: A request to end the agent JVM process has been received.
Severity: 0 : Information
Explanation: A request to end the agent JVM process has been submitted to the JVM process. The agent process will now end.
Response: No user action is necessary.

BFGAG0101E: The property named ''<insert_0>'' was specified as having the value ''<insert_1>'' in the agent.properties file. This is not a valid value for this property. The values ''true'' and ''false'' are the only valid values for this property. The agent process will now end.
Severity: 20 : Error
Explanation: The named property must be correctly specified in the configuration file, otherwise the process cannot start.
Response: Use the information in the message to determine which changes are needed in the configuration file specified. Update the configuration file with these changes and restart this process.

BFGAG0102E: The property named ''<insert_0>'' was specified as having the value ''<insert_1>'' in the agent.properties file. This is not a valid value for this property. The values ''all'', ''failures'' and ''none'' are the only valid values for this property. The agent process will now end.
Severity: 20 : Error
Explanation: The named property must be correctly specified in the configuration file, otherwise the process cannot start.
Response: Use the information in the message to determine which changes are needed in the configuration file specified. Update the configuration file with these changes and restart this process.

BFGAG0103E: The agent has detected an error condition that prevents the agent from continuing. The error message is: <insert_0>
Severity: 20 : Error
Explanation: The agent has received the specified error. The agent cannot continue processing after receiving this error. The agent process will end.
Response: Use the information in the error message to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0104I: The authority check for user ''<insert_0>'' and authority ''<insert_1>'' has mapped to checking the ''<insert_2>'' authority on queue ''<insert_3>''.
Severity: 0 : Information
Explanation: The authority check for the specified user has been mapped to the specified IBM MQ authority of the specified queue.
Response: No user action is required.

BFGAG0105I: The authority check for user ''<insert_0>'' and authority ''<insert_1>'' has passed.
Severity: 0 : Information
Explanation: The specified user has the specified authority and will be permitted to perform the associated operation.
Response: No user action is required.

BFGAG0106W: The authority check for user ''<insert_0>'' and authority ''<insert_1>'' has failed.
Severity: 10 : Warning
Explanation: The specified user does not have the specified authority and will not be permitted to perform associated the operation.
Response: Determine if the specified user should be able to carry out the operation. If so, use the information provided in the product documentation to grant the user the specified permission. If not, use the information provided by the message to notify the specified user that they are not authorized to perform the operation.

BFGAG0107E: The agent has received a reason code of ''<insert_0>'' from the MQI. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0108E: An internal error has occurred. The exception is: <insert_0>
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0109E: A required IBM MQ Queue (<insert_0>), used for authority checking, is not defined to the queue manager to which this agent is connected (<insert_1>). The agent cannot continue without this queue being defined and will now end.
Severity: 20 : Error
Explanation: The specified queue is not defined to the specified queue manager. The queue is required for agent authority checking and the agent cannot continue without the queue being defined. The agent process will end.
Response: The queue, specified by the message, is only required if the agent is configured to perform authority checking. Verify whether the agent is required to perform authority checking. If it is then define the specified queue. If it is not then disable this function of the agent. For more assistance consult the product documentation.

BFGAG0110E: The property named ''<insert_0>'' was assigned an incorrect value of ''<insert_1>''. Valid values for the property are either ''none'' or ''java''. The agent process will now end.
Severity: 20 : Error
Explanation: The named property must be assigned one of the specified values, otherwise the process cannot start.
Response: Use the information in the message to determine which changes are needed in the configuration file specified. Update the configuration file with these changes and restart this process.

BFGAG0111E: The standby connection name is not valid: ''<insert_0>''. The agent process will now end.
Severity: 20 : Error
Explanation: The specified standby connection name is not valid. Standby connection names must consist of a hostname immediately followed by a port number enclosed in parenthesis, for example: HOST.IBM.COM(1414). The agent process will not start if the standby connection name is incorrectly specified.
Response: Modify the agent.properties file so that the value assigned to the 'agentQMgrStandby' property is a valid standby connection name. Restart the agent.

BFGAG0112E: The standby connection name specifies a port number which is not valid: ''<insert_0>''. The agent process will now end.
Severity: 20 : Error
Explanation: The specified standby connection name specifies a port number which is not valid. Port numbers must be a non-negative numeric valid. The agent process will not start if the connection name specifies a port number which is not valid.
Response: Modify the agent.properties file so that the value assigned to the 'agentQMgrStandby' property is a valid standby connection name. Restart the agent.

BFGAG0113E: The standby connection name duplicates the primary connection details: ''<insert_0>''. The agent process will now end.
Severity: 20 : Error
Explanation: The specified standby connection name specifies the same host and port as the primary connection details for the agent. This would result in the agent not being highly available and so the agent will not start using this configuration.
Response: Modify the agent.properties file so that the value assigned to the 'agentQMgrStandby' does not duplicate the values assigned to the 'agentQMgrHost' and 'agentQMgrPort' properties. Restart the agent.

BFGAG0114I: No suitable root directory can be found for transfers that specify a relative path. This agent will not accept transfers that specify relative paths.
Severity: 0 : Information
Explanation: The agent has been started without the 'transferRoot' property and the home directory for the user that started the agent either does not exist or cannot be both read from and written to. The agent will not accept file transfers that specify relative paths to files being transferred.
Response: No user action is required if the agent does not need to accept transfers that specify relative paths. If the agent requires to be able to process transfers that specify relative paths then either configure the agent using the 'transferRoot' property, or ensure that the user used to run the agent process has a valid home directory.

BFGAG0115I: Relative path transfer root directory: <insert_0>
Severity: 0 : Information
Explanation: The agent will use the specified directory as the root directory for any file transfers which specify a relative path.
Response: No action is required.

BFGAG0116E: This is an 'MFT Agent' installation of IBM MQ Managed File Transfer and the agent is configured as a protocol bridge.
Severity: 20 : Error
Explanation: Protocol bridge agents are not supported on 'MFT Agent' installations of IBM MQ Managed File Transfer, they are only supported on 'MFT Service' installations.
Response: Configure the agent as a standard agent or install the IBM MQ Managed File Transfer Service.

BFGAG0117E: The agent is configured as a protocol bridge MQMFT agent and a sandbox has been configured.
Severity: 20 : Error
Explanation: Sandboxes are not supported on protocol bridge MQMFT agents.
Response: Remove the sandboxRoot property from agent property file to disable the sandbox or configure the agent as a standard MQMFT agent.

BFGAG0119E: The agent has received MQI reason code ''<insert_0>''. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0120E: An internal error occurred. The exception is: <insert_0>
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0121E: The agent cannot be configured with both the ''<insert_0>'' and ''<insert_1>'' properties.
Severity: 20 : Error
Explanation: The agent cannot start because it has been incorrectly configured. The agent permits at most one of the specified properties to be specified, however both properties were specified. The agent process will now end.
Response: Consult the product documentation for more information about each of the specified properties. Change the configuration for the agent so that at most one of the properties is specified. Restart the agent process.

BFGAG0122E: The agent cannot start because of a problem with the user sandbox configuration.
Severity: 20 : Error
Explanation: The agent cannot start because it has detected a problem with the user sandbox document. Consult the earlier error messages to determine the cause of the problem.
Response: Use the earlier error messages to help resolve the problem. When the problem has been resolved, restart the agent process.

BFGAG0123W: The agent received MQI reason code <insert_0> when opening the coordination queue ''<insert_1>'' on coordination queue manager ''<insert_2>'' from the agent queue manager ''<insert_3>''.
Severity: 10 : Warning
Explanation: The agent received the specified MQI reason code when the agent attempted to open a coordination queue on the coordination queue manager. This will limit the reporting of transfer log information and status of scheduled transfers and resource monitoring, but will not stop the agent from transferring files.
Response: Investigate the health of the coordination queue manager and the configuration between the agent queue manager and the coordination queue manager and restart the agent as necessary.

BFGAG0124E: The agent received MQI reason code <insert_0> when opening a coordination queue ''<insert_1>'' on the coordination queue manager ''<insert_2>'' from the agent queue manager ''<insert_3>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to open a queue on the coordination queue manager from the agent queue manager. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Verify that the specified coordination queue manager name is correct in the coordination properties and that a transmission channel has been established between the agent queue manager and the coordination queue manager. If the agent queue manager is running on z/OS and is in an MQ cluster with the coordination queue manager, ensure that the channel initiator (CHINIT) is running. Resolve the problem and restart the agent.

BFGAG0125W: The maximum size to which the java heap can grow is ''<insert_0>''MB, which is the default value. This value may be too low dependent on the agent''s work load.
Severity: 10 : Warning
Explanation: The default maximum memory size to which the java heap can grow may be too low. This may result in an agent failure with an out of memory error if the agent is processing multiple concurrent transfers.
Response: For more information, refer to 'Hints and tips for using MFT' under the 'MFT general troubleshooting' topic of the product documentation in the IBM MQ section of IBM Knowledge Center.

BFGAG0126E: One or more files specified in the extendedSecurityPath property were not found. The IBM MQ Advanced Message Security interceptor might not be loaded, or it might be partially loaded and malfunction. The agent will stop. The missing file(s) are: <insert_0>
Severity: 20 : Error
Explanation: If you are using IBM MQ Advanced Message Security with MQMFT, you specify the location of the AMS library jars in the extendedSecurityPath property in a suitable property file. This message indicates that one or more of the jar locations specified does not exist.
Response: Ensure that IBM MQ Advanced Message Security is properly installed and that the paths in the extendedSecurityPath property are correct.

BFGAG0127E: One or more file names specified in the extendedSecurityPath property were invalid. The IBM MQ Advanced Message Security interceptor might not be loaded, or it might be partially loaded and malfunction. The agent will stop. The files involved are: <insert_0>
Severity: 20 : Error
Explanation: If you are using IBM MQ Advanced Message Security with MQMFT, you specify the location of the AMS library jars in the extendedSecurityPath property in a suitable property file. This message indicates that one or more of the file paths specified was invalid. Specifically, the Java URL libraries reported an exception when converting the file path to an absolute URL with a file: scheme. The originally reported error(s) are included at the end of the message.
Response: Ensure that the paths in the extendedSecurityPath property are correct. Depending on your operating system you may need to escape some characters or use Unix-style path separators even on a non-Unix platform.

BFGAG0128W: The agent is running in a mode which cannot load the IBM MQ Advanced Message Security interceptor. The agent will continue, but AMS facilities will not be available.
Severity: 10 : Warning
Explanation: If you use the extendedSecurityPath property in the property files, the agent attempts to load the AMS Java classes from the specified jar files. This is done using the standard agent classloader. This error indicates that the classloader which loaded the agent class is not the expected MQMFT agent classloader and so the AMS jars cannot be loaded.
Response: Ensure that MQMFT is installed correctly and being run according to the published documentation. If this does not solve the problem, contact the IBM Support Center for assistance.

BFGAG0131I: This agent has been configured as a Web Gateway agent.
Severity: 0 : Information
Explanation: The agent has been configured to operate as a Web Gateway agent.
Response: No action is required.

BFGAG0132E: IBM MQ reported a problem with the SSL configuration for this agent (IBM MQ reason code: <insert_0>). The agent process will now exit.
Severity: 20 : Error
Explanation: The agent has detected a problem with the SSL configuration used to connect to IBM MQ. For more details, consult the IBM MQ product documentation using the indicated reason code. The agent process is not able to continue after it encounters this condition and will exit.
Response: Use the information available from the IBM MQ product documentation to resolve the SSL related issue. Restart the agent process.

BFGAG0133E: This is an 'MFT Agent' installation of IBM MQ Managed File Transfer and the agent is configured as a Web Gateway agent.
Severity: 20 : Error
Explanation: Web Gateway agents are not supported on 'MFT Agent' installations of IBM MQ Managed File Transfer, they are only supported on 'MFT Service' installations.
Response: Configure the agent as a standard agent or install the IBM MQ Managed File Transfer Service.

BFGAG0134I: A request to end the agent JVM process has been received.
Severity: 0 : Information
Explanation: A request to end the agent JVM process has been submitted to the JVM process. The agent process will now end.
Response: No user action is necessary.

BFGAG0135W: A non-production service facility is enabled. The ''<insert_0>'' file will be monitored and the agent process will end if the file ceases to exist.
Severity: 10 : Warning
Explanation: A non-production service facility is enabled, which will help provide additional diagnostic information. This product function should only be enabled at the request of IBM service.
Response: No user action is necessary.

BFGAG0136W: The command level for queue manager <insert_0> cannot be obtained. IBM MQ reason code: <insert_1>
Severity: 10 : Warning
Explanation: The command level could not be obtained from the agent's queue manager. Normally this is not an issue. However for an MQMFT agent on z/OS connected to a WebSphere MQ V6.0.0 or WebSphere MQ V7.0.1 queue manager, if a fatal error occurs, it can result in the agent being unable to shut down.
Response: Refer to the IBM MQ product documentation for more information about the error code. When you have resolved the issue, restart the agent process.

BFGAG0137I: The agent is running as Windows service: ''<insert_0>''.
Severity: 0 : Information
Explanation: The agent process is running as a Windows service.
Response: No action is required.

BFGAG0138I: The agent configured as Windows service ''<insert_0>'' is running in the foreground, and not as a Windows service.
Severity: 0 : Information
Explanation: The agent process is configured to run as a Windows service but is currently running as a foreground process, since it was started with the -F command line option.
Response: No action is required.

BFGAG0139I: The agent has suspended its current transfers and is now stopping.
Severity: 0 : Information
Explanation: A request to stop the agent has been received. All active transfers have been suspended and the agent is now stopping. Any outstanding commands will be stopped. Note that the agent had to force a shutdown because some transfers did not respond to the request to stop.
Response: No action is required.

BFGAG0140E: The agent has requested all transfers to stop but some transfers have failed to respond in time.
Severity: 20 : Error
Explanation: A request to stop the agent has been received. Some active transfers are still running. After these respond to the request to stop, the agent will shut down. Any outstanding commands will be stopped if they do not complete after a short period of time.
Response: No action is required.

BFGAG0141E: The agent encountered a security error while attempting to open its data queue, <insert_0>. See the Explanation and User Action for this message in the IBM MQ Managed File Transfer product documentation.
Severity: 20 : Error
Explanation: The agent uses a queue to receive incoming file data. The agent opens this queue when it starts up. On this occasion, IBM MQ has reported a security error. This might be due to a misconfiguration of IBM MQ Advanced Message Security, or a security policy which is not appropriate for this IBM MQ Managed File Transfer network. It is also possible for this error to occur due to an incorrect configuration of IBM MQ's own authority records.
Response: Ensure that the required set of authorities exist for the agent user, as defined in the topic "Managing authorities for resources specific to IBM MQ Managed File Transfer". If the agent runs in bindings mode, the agent user is the user which started the agent. If the agent runs in client mode the agent user may be the user which started the agent, but may instead be a different user (for example, if MCAUSER is set on the agent's channel, or if the userIdForClientConnect property is not appropriately set). In addition, review the agent queue manager's error logs and if using IBM MQ Advanced Message Security consult the IBM MQ product documentation for assistance on configuring security policies. For more information, see the product documentation for IBM MQ.

BFGAG0142E: The agent encountered a security error while attempting to open its data queue, <insert_0>. See the Explanation and User Action for this message in the IBM MQ Managed File Transfer product documentation.
Severity: 20 : Error
Explanation: The agent uses a queue to receive incoming file data. The agent opens this queue when it starts up. On this occasion, IBM MQ has reported a security error.
Response: Ensure that the required set of authorities exist for the agent user, as defined in the topic "Managing authorities for resources specific to IBM MQ Managed File Transfer". If the agent runs in bindings mode, the agent user is the user which started the agent. If the agent runs in client mode the agent user may be the user which started the agent, but may instead be a different user (for example, if MCAUSER is set on the agent's channel, or if the userIdForClientConnect property is not appropriately set). For more information, see the product documentation for IBM MQ.

BFGAG0143E: This is an embedded installation of IBM MQ Managed File Transfer and the agent is configured as a Connect:Direct bridge agent.
Severity: 20 : Error
Explanation: Connect:Direct bridge agents are not supported with embedded installations of IBM MQ Managed File Transfer.
Response: Configure the agent as a standard MQMFT agent.

BFGAG0144E: Incompatible properties have been configured for the MQMFT agent.
Severity: 20 : Error
Explanation: Protocol bridge agent properties and Connect:Direct bridge agent properties must not be configured on the same MQMFT agent.
Response: If you have configured a Connect:Direct bridge agent, ensure you have not set properties that are specific to protocol bridge agents. If you have configured a protocol bridge agent, ensure you have not set properties that are specific to Connect:Direct bridge agents.

BFGAG0145I: This MQMFT agent has been configured as a Connect:Direct bridge agent. Connect:Direct JAI version: <insert_0>
Severity: 0 : Information
Explanation: The MQMFT agent has been successfully configured to operate as a Connect:Direct bridge agent.
Response: No action is required.

BFGAG0146E: This is a z/OS installation of IBM MQ Managed File Transfer and the agent is configured as a Connect:Direct bridge agent.
Severity: 20 : Error
Explanation: Connect:Direct bridge agents are not supported with IBM MQ Managed File Transfer for z/OS.
Response: Configure the agent as a standard MQMFT agent.

BFGAG0147E: Incompatible properties have been configured for the MQMFT agent.
Severity: 20 : Error
Explanation: Protocol bridge agent properties must not be configured on an MQMFT agent that is configured as a Web Gateway agent.
Response: If you have configured a Web Gateway agent, ensure you have not set properties that are specific to protocol bridge agents. If you have configured a protocol bridge agent, ensure you have not set the agentType property to WEB_GATEWAY.

BFGAG0148E: The agent has been configured as a Connect:Direct bridge agent but the cdNode property has not been defined.
Severity: 20 : Error
Explanation: MQMFT agent property cdNode, which specifies the Connect:Direct node to use, must be configured for a Connect:Direct bridge agent.
Response: Either reconfigure the agent so that it is not a Connect:Direct bridge agent or update the agent properties to include the cdNode property.

BFGAG0150E: Failed to initialize the Connect:Direct credential mappings in ConnectDirectCredentials.xml
Severity: 20 : Error
Explanation: The Connect:Direct bridge agent requires that the credential mappings in ConnectDirectCredentials.xml are successfully initialized.
Response: Check for previous errors in the agent event log to determine the cause of the problem. Correct the problem and then restart the Connect:Direct bridge agent.

BFGAG0151E: Failed to initialize the Connect:Direct JAI library.
Severity: 20 : Error
Explanation: The Connect:Direct bridge agent requires that the JAI library (CDJAI.jar) is present in the product installation root 'lib' directory.
Response: Check that the Connect:Direct JAI library is present in the product installation root 'lib' directory and try starting the agent again.

BFGAG0152E: Temporary directory ''<insert_0>'' specified for MQMFT Connect:Direct bridge agent property ''cdTmpDir'' cannot be created or is invalid.
Severity: 20 : Error
Explanation: Temporary directory specified by MQMFT agent property 'cdTmpDir' cannot be used by the MQMFT Connect:Direct bridge agent.
Response: Check that the temporary directory exists and the MQMFT Connect:Direct bridge agent has authority to read and write to the directory. See the IBM MQ Managed File Transfer documentation for more information.

BFGAG0153E: Failed to initialize the Connect:Direct process definitions file <insert_0>
Severity: 20 : Error
Explanation: The Connect:Direct bridge agent requires that the process definitions in the process definitions file are successfully initialized.
Response: Check for previous errors in the agent event log to determine the cause of the problem. Correct the problem and then restart the Connect:Direct bridge agent.

BFGAG0154E: Failed to initialize the Connect:Direct node properties file <insert_0>
Severity: 20 : Error
Explanation: The Connect:Direct bridge agent requires that the node properties in the node properties file are successfully initialized.
Response: Check for previous errors in the agent event log to determine the cause of the problem. Correct the problem and then restart the Connect:Direct bridge agent.

BFGAG0155W: The AgentQueueManagerConnectionListener onDisconnect method has thrown a RuntimeException. The exception is: <insert_0>
Severity: 10 : Warning
Explanation: The user-defined onDisconnect method called when the agent disconnected from the agent queue manager has thrown a RuntimeException during its execution. The agent has continued but the onDisconnect method might not have functioned as intended.
Response: Check the reason for the RuntimeException being thrown.

BFGAG0156W: The AgentQueueManagerConnectionListener onConnect method has thrown a RuntimeException. The exception is: <insert_0>
Severity: 10 : Warning
Explanation: The user-defined onConnect method called when the agent connected to the agent queue manager has thrown a RuntimeException during its execution. The agent has continued but the onConnect method might not have functioned as intended.
Response: Check the reason for the RuntimeException being thrown.

BFGAG0157E: The agent has suspended its current transfers and is now stopping.
Severity: 20 : Error
Explanation: A request to stop the agent has been received. All active transfers have been suspended and the agent is now stopping. Any outstanding commands will be stopped. Note that the agent had to force a shutdown because some transfers did not respond to the request to stop.
Response: No action is required.

BFGAG0158W: Invalid compression property value <insert_0> ignored.
Severity: 10 : Warning
Explanation: An invalid compression property has been ignored.
Response: Fix the compression property value in the agents property files.

BFGAG0159W: Invalid compression property value <insert_0> ignored.
Severity: 10 : Warning
Explanation: An invalid compression property has been ignored.
Response: Fix the compression property value in the agents property files.

BFGAG0160I: The additional function in Fix Pack <insert_0> has been enabled for this agent.
Severity: 0 : Information
Explanation: The wmqfte.properties file contains an entry that has enabled the optional additional function that is available in the given fix pack release.
Response: No action is required.

BFGAG0161E: IBM MQ reported a problem with the SSL configuration for this agent (IBM MQ reason code: <insert_0>. Diagnostic message code: <insert_1>). The agent process will now exit.
Severity: 20 : Error
Explanation: The agent has detected a problem with the SSL configuration used to connect to IBM MQ. For more details, consult the IBM MQ product documentation using the indicated reason code and diagnostic message code. The agent process is not able to continue after it encounters this condition and will exit.
Response: Use the information available from the IBM MQ product documentation to resolve the SSL related issue. Restart the agent process.

BFGAG0162E: The agent received MQI reason code <insert_0> with diagnostic message code <insert_1> when establishing a client transport mode connection to the default queue manager with connection name ''<insert_2>'' and using channel ''<insert_3>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to establish a client transport mode connection to the default queue manager. For more details, consult the IBM MQ product documentation using the indicated reason code and diagnostic message code. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0163E: The agent received MQI reason code <insert_0> with diagnostic message code <insert_1> when establishing a client transport mode connection to the queue manager ''<insert_2>'' with connection name ''<insert_3>'' and using channel ''<insert_4>''. The agent cannot continue and will end.
Severity: 20 : Error
Explanation: The agent received the specified MQI reason code when the agent attempted to establish a client transport mode connection to the specified queue manager. For more details, consult the IBM MQ product documentation using the indicated reason code and diagnostic message code. This problem prevented the agent from carrying out further work and caused the agent to end.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem and restart the agent.

BFGAG0164E: The property named ''<insert_0>'' was assigned a value of ''<insert_1>'' which is greater than then maximum supported value of ''<insert_2>''. The agent process will now end.
Severity: 20 : Error
Explanation: The property value that was specified was too large. Specify a smaller value.
Response: Specify a value that is no larger than the maximum size given in the message.

BFGAG0165E: The agent received an unsupported interprocess communications message. Message contents: <insert_0>
Severity: 20 : Error
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0166W: The service name property of the interprocess communications mechanism <insert_0> has not been defined or is set to a blank service name.
Severity: 10 : Warning
Explanation: This exception is unexpected. The cause is not immediately known.
Response: If the problem persists, see problem determination information in the product documentation.

BFGAG0167W: The interprocess communications mechanism for service name <insert_0> has failed to start, because of error: <insert_1>
Severity: 10 : Warning
Explanation: The interprocess communications mechanism has failed to start for the reason given. This means that local communication with the agent for diagnostic monitoring and control purposes is not possible.
Response: Examine the reason given for the failure and take action as appropriate. When the problem is resolved, restart the agent to enable the interprocess communications mechanism. If the problem persists, contact the IBM MQ Managed File Transfer product support team for assistance.

BFGAG0168I: A request to immediately shut down this agent has been received.
Severity: 0 : Information
Explanation: An external shutdown request has been received and this agent is performing an immediate shutdown.
Response: No action is required.

BFGAG0169I: A request to shut down this agent has been received.
Severity: 0 : Information
Explanation: An external shutdown request has been received and this agent is now waiting for the current transfer to complete.
Response: No action is required.

BFGAG0170W: The agent has ended because the queue manager is unavailable. The agent will be restarted when the queue manager becomes available.
Severity: 10 : Warning
Explanation: The agent has ended because the queue manager is no longer available. When the queue manager becomes available again the process controller will restart the agent.
Response: If the queue manager was deliberately stopped, then no action is required. Otherwise the queue manager should be investigated to discover the cause of the problem.

BFGAG0171E: The agent has ended abnormally with return code <insert_0>.
Severity: 20 : Error
Explanation: The agent ended abnormally because of an error. If this is recoverable then the agent will be automatically restarted by the process controller.
Response: None, normally this type of error can be tolerated. But if the problem persists, contact the IBM MQ Managed File Transfer product support team for assistance.

BFGAG0172E: The agent has been prevented from starting because it has been configured as a protocol bridge agent, which is not supported on 4690 OS.
Severity: 20 : Error
Explanation: The protocol bridge function cannot be used on 4690 OS.
Response: Configure the agent as a standard agent and attempt to start it again.

BFGAG0173E: The agent has been prevented from starting because it has been configured as a Connect:Direct bridge agent, which is not supported on 4690 OS.
Severity: 20 : Error
Explanation: The Connect:Direct bridge function cannot be used on 4690 OS.
Response: Configure the agent as a standard agent and attempt to start it again.

BFGAG0174E: The agent has been prevented from starting because it has been configured as a Web Gateway agent, which is not supported on 4690 OS.
Severity: 20 : Error
Explanation: The Web Gateway function cannot be used on 4690 OS.
Response: Configure the agent as a standard agent and attempt to start it again.

BFGAG0175E: License agreement not yet accepted: Installation will not work until the license agreement is accepted.
Severity: 20 : Error
Explanation: The license agreement must be accepted before installation can proceed.
Response: Use the ftelap command to view and accept the license before proceeding

BFGAG0176E: The directory ''<insert_0>'' specified for the transferRoot agent property is not valid. For a 4690 OS agent this property must refer to an absolute path. The agent cannot continue.
Severity: 20 : Error
Explanation: When specifying the value of the transferRoot property for an agent running on 4690 OS, the path specified must be absolute. Relative path values for transferRoot are not supported.
Response: Change the value of transferRoot to an absolute path.

BFGAG0177E: The agent.properties file has the doNotUseTempOutputFile property set to true, which is not supported on 4690 OS.
Severity: 20 : Error
Explanation: It is not supported for 4690 agents to write directly to the final destination file. Therefore the doNotUseTempOutputFile property must be set to false or defaulted to false.
Response: Check the contents of the agent.properties file for the agent and ensure that the doNotUseTempOutputFile property is set to false or defaulted to false.

BFGAG0179E: The agent has ended abnormally with return code <insert_0>.
Severity: 20 : Error
Explanation: The agent ended abnormally because of an error.
Response: Restart the agent. If the problem persists, contact the IBM MQ Managed File Transfer product support team for assistance.

BFGAG0180W: A bindings transport mode connection cannot be established to the default queue manager. The reason code is <insert_0>. The agent will try the operation again every <insert_1> seconds.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot establish a bindings mode connection to the default queue manager because of the specified MQI reason code. The agent will keep trying the operation again at the specified interval. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0181W: A bindings transport mode connection cannot be established to queue manager ''<insert_0>''. The reason code is <insert_1>. The agent will try the operation again every <insert_2> seconds.
Severity: 10 : Warning
Explanation: The agent cannot transfer file information because the agent cannot establish a bindings mode connection to the specified queue manager because of the specified MQI reason code. The agent will keep trying the operation again at the specified interval. When the problem is corrected the agent will be able to transfer files again.
Response: Consult the IBM MQ product documentation to determine the cause of the problem. Resolve the problem.

BFGAG0182E: Web agent is not supported.
Severity: 20 : Error
Explanation: Web agent is not supported from IBM MQ Managed File Transfer v9.
Response: No action is required.

BFGAG0183I: The agent received MQI reason code <insert_0>. Agent recovery will be initiated.
Severity: 0 : Information
Explanation: The agent received a recoverable MQI reason code. Agent recovery will be initiated if the agent is not stopping or is not already recovering beacuse of an earlier recoverable error.
Response: No action required.

BFGAG0184W: The agent property ''<insert_0>'' has been defined but the "agentSslTrustStore" property has not been defined. Secure TLS handshaking will not be requested if the agent attempts to connect to its agent queue manager using the CLIENT transport mode.
Severity: 10 : Warning
Explanation: An agent will only attempt to connect to its queue manager using a secure TLS connection when the "agentSslTrustStore" property has been defined.
Response: Ensure the "agentSslTrustStore" property has been defined and points to a valid certificate store if a TLS CLIENT transport mode connection to the agent's queue manager is required.

BFGAG0185W: The agent property ''<insert_0>'' has been defined but one of the "agentSslCipherSpec" or "agentSslCipherSuite" properties have not been defined. For secure CLIENT transport mode connections, a cipher must be specified, which corresponds to the one defined on the server-connection channel, that is used by the agent to connect to its queue manager.
Severity: 10 : Warning
Explanation: While validating the defined properties in the agent.properties file, an expected set of TLS property combinations was found to be incomplete. Secure TLS handshaking may fail with the current configuration.
Response: Define one of the "agentSslCipherSpec" or "agentSslCipherSuite" properties with a value that maps to the MQ CipherSpec defined on the server-connection channel used by the agent. Please refer to the product documentation for more details.

BFGAG0186W: The agent property ''<insert_0>'' has been defined but the associated agent property ''<insert_1>'' has not been defined. Secure TLS handshaking may fail with the current configuration.
Severity: 10 : Warning
Explanation: While validating the defined properties in the agent.properties file, an expected set of TLS property combinations was found to be incomplete.
Response: Review the agent's TLS property settings to ensure they are complete. Please refer to the product documentation for more details.

BFGAG0187E: The attempt to connect to a queue manager has failed because of missing or incorrect security details.
Severity: 20 : Error
Explanation: An attempt to connect to a queue manager has failed because of an authorization issue. A potential cause of the failure might be because a password of more than 12 characters in length was provided when authorizing using Compatibility Mode. Passwords longer than 12 characters in length are only supported when using MQCSP authentication.
Response: In the situation when a password greater than 12 characters in length is used to authenticate with the queue manager, ensure that the useMQCSPAuthentication parameter is set to true for the user entry in the credentials file. In all other cases review the MFT configuration and update the credentials file to include the necessary information to allow connection to the queue manager.

BFGAG0190W: The agent is connected to a queue manager and was not able to determine whether the queue manager was suitably licensed for IBM MQ Managed File Transfer usage.
Severity: 10 : Warning
Explanation: This message is output when IBM MQ Managed File Transfer agent is connected to a queue manager but could not confirm whether the queue manager was licensed for usage with IBM MQ Managed File Transfer. The IBM MQ Managed File Transfer agent can be used with a queue manager on distributed, z/OS or appliance platforms providing it has correct entitlement. On distributed platforms the queue manager must have IBM MQ Advanced or IBM MQ Managed File Transfer entitlement. On z/OS platforms the queue manager must have IBM MQ Advanced VUE, IBM MQ Managed File Transfer or IBM MQ Advanced entitlement.
Response: Confirm that you have an appropriate license for using IBM MQ Managed File Transfer agent with the queue manager it is connecting to.

BFGAG0191I: The agent is connected to a queue manager which is suitably licensed for usage with IBM MQ Managed File Transfer.
Severity: 0 : Information
Explanation: This message is output when IBM MQ Managed File Transfer agent is connected to a queue manager which is suitably licensed for usage with IBM MQ Managed File Transfer. On distributed platforms the queue manager must have IBM MQ Advanced or IBM MQ Managed File Transfer entitlement. On z/OS platforms the queue manager must have IBM MQ Advanced VUE, IBM MQ Managed File Transfer or IBM MQ Advanced entitlement.
Response: No action is required.

BFGAG0192I: The agent has successfully initialized as an active instance on host ''<insert_0>''.
Severity: 0 : Information
Explanation: The agent has successfully initialized as active instance and is preparing to process transfers.
Response: No action is required.

BFGAG0193I: The agent has successfully initialized as a standby instance on host ''<insert_0>''.
Severity: 0 : Information
Explanation: The agent has successfully initialized as a standby instance and is waiting to take over.
Response: No action is required.

BFGAG0194E: An instance of this agent is already running elsewhere. Hence this instance cannot continue and will end.
Severity: 20 : Error
Explanation: An instance of this agent is already running on another machine.
Response: Use -x option to start in a high availability mode.

BFGAG0195E: Agent queue ''<insert_0>'' required for high availability is not defined in agent queue manager.
Severity: 20 : Error
Explanation: An agent queue is required for agent high availability configuration to work. The queue isis not defined in the agent queue manager.
Response: Define the required agent queue and resubmit the request.

BFGAG0196E: Failed to open agent queue ''<insert_0>'' due to a security error. The IBM MQ reason code is <insert_1>.
Severity: 20 : Error
Explanation: The specified user does not have the PUT and GET authority on agent high availability queue.
Response: Use the information provided in the product documentation to grant the user the specified permission.

BFGAG0197E: Failed to open agent queue ''<insert_0>''. The IBM MQ reason code is <insert_1>.
Severity: 20 : Error
Explanation: Agent encountered an IBM MQ error while accessing high availabilty queue.
Response: Use the information provided for the error code in the product documentation and take necessary action.

BFGAG0198E: High availability function not supported for agent type ''<insert_0>''. Agent will stop.
Severity: 20 : Error
Explanation: Hight availability function is supported only for STANDARD and BRIDGE type agents. It is not supported for CD_BRIDGE and Embedded type agents.
Response: Modify agent configuration and resubmit the request.

BFGAG0199E: The version of IBM MQ Managed File Transfer installed on standby machine does not match with the version on active instance running elsewhere. This instance of agent will stop.
Severity: 20 : Error
Explanation: Both active and standby instances must be of the same version IBM MQ Managed File Transfer for high availability to work.
Response: Ensure same version of IBM MQ Managed File Transfer is installed on both active and standby machines and resubmit the request.

BFGAG0200E: An error occurred while determining the version of active instance. The error is ''<insert_0>''.
Severity: 20 : Error
Explanation: The standby instance of the agent failed to determine the version of active instance running elsewhere.
Response: Use the information provided for the error message in the product documentation and take necessary action.

BFGAG0201I: The active instance of this agent running elsewhere has ended. This instance will now be initialized as the active instance on host ''<insert_0>''.
Severity: 0 : Information
Explanation: The active instance of this agent running elsewhere has ended. This instance will now be initialized as the active instance.
Response: Not action required.

BFGAG0202I: Current source transfers
Severity: 0 : Information
Explanation: List of current transfers originating from this agent.
Response: No action required.

BFGAG0203I: Current destination transfers
Severity: 0 : Information
Explanation: List of current transfers to which this agent is a destination.
Response: No action required.

BFGAG0204I: Agent is running in ''<insert_0>'' container runtime.
Severity: 0 : Information
Explanation: Name of the container runtime this agent is running under.
Response: No action required.

BFGAG0205E: The agent has received MQI reason code ''<insert_0>'' when trying to open queue ''<insert_1>'' on the agent queue manager. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the reason code. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0206E: The agent has received MQI reason code ''<insert_0>'' when trying to open queue ''<insert_1>'' on the agent queue manager. The agent cannot continue processing and will now end.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue processing after receiving this reason code from the MQI. The agent process will end.
Response: Consult the IBM MQ product documentation to determine the cause of the reason code. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0207E: Failed to retrieve transfer state from store due to exception ''<insert_0>''. Agent process cannot continue and will end now.
Severity: 20 : Error
Explanation: The agent has received the specified error. The agent cannot continue processing after receiving this error. The agent process will end.
Response: Use the information in the error message to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0208E: Failed to retrieve transfer state from store due to exception ''<insert_0>''. Agent process cannot continue and will end now.
Severity: 20 : Error
Explanation: The agent has received the specified error. The agent cannot continue processing after receiving this error. The agent process will end.
Response: Use the information in the error message to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0209E: The agent received MQI reason code ''<insert_0>'' when trying to open queue open ''<insert_1>''. The agent cannot continue processing and will end now.
Severity: 20 : Error
Explanation: The agent has received the specified MQI reason code. The agent cannot continue the transfer recovery processing after receiving this reason code from the MQI.
Response: Use the information in the error message to determine the cause of the problem. Resolve the problem. Contact the IBM support center if you need further assistance.

BFGAG0210W: The transfer log specification "<insert_0>" is not valid. Transfer logging has been turned off.
Severity: 10 : Warning
Explanation: The specified transfer log is not valid. Transfer logging has been turned off.
Response: Specify a valid transfer log level and restart the agent.

BFGAG0211W: The current usable disk space ''<insert_0>'' is less than the maximum usable disk space, ''<insert_1>'' required for writing agent event logs.
Severity: 10 : Warning
Explanation: The current usable disk space is less than the maximum disk space required for writing agent logs. This is the sum of values of (outputLogSize * outputLogFiles), (agentLogFileSize* agentLogFiles), (resourceMonitorLogFileSize * resourceMonitorLogFiles), (logTransferFileSize * logTransferFiles) and (logCaptureFileSize * logCaptureFiles) agent properties.
Response: Increase disk space or free up disk space.

BFGAG9999E: <insert_0>
Severity: 20 : Error
Explanation: If this message does not give enough information, check the accompanying error messages for further information.
Response: For further information on resolving this error, see the problem determination information on the product Web site.