KN3 configuration parameters
The configuration parameters for the IBM® Z OMEGAMON Network Monitor monitoring agent are grouped logically in the PARMGEN configuration file.
This section explains the parameters found in the IBM Z OMEGAMON Network Monitor section of the PARMGEN configuration profile. The prefix associated with IBM Z OMEGAMON Network Monitor is KN3.
The following parameters are grouped and presented in the order found in the configuration profile.
- Values that describe the address space
- Specify communication protocols preference for TEMS connection
- Protocol port numbers for Agent connection to TEMS
- Values that describe the Primary TEMS the Agent will connect to
- Agent's Primary TEMS TCP/IP information
- Agent's primary TCP/IP information Note: KN3_TEMS_TCP_HOST and KN3_AGT_TCP_HOST must be the same value if KN3_TEMS_LOCAL_CONNECT_FLAG=Y (Agent connects to local TEMS).
- Agent's local TCP/IP information
- KN3_AGT_TCP_HOST
- KN3_AGT_TCP_STC
- KN3_AGT_TCP_KDEB_INTERFACELIST (If the Agent requires network interface list support)
- KN3_AGT_PARTITION_NAME (If the Agent requires address translation support–optional)
- If the Agent requires network interface list support
- If the Agent requires address translation support
- Agent's Primary TEMS VTAM information
- Agent's local VTAM and logon information
- Agent's Applids
- VTAM Secondary Program Operator (SPO) for Communication Network Management (CNM) interface
- Advanced Agent configuration values
- Take Action commands security settings
- Secondary TEMS configuration
- Secondary TEMS TCP/IP information
- Secondary TEMS VTAM information
- Agent parameters: TCP/IP information
- KN3_SNA_VTAM_COLLECT_DATA
- KN3_SNA_VTAM_SNAC_SNACINTV
- KN3_TCP_ALLHPR
- KN3_TCP_COLLECT_STACK
- KN3_TCP_CONN
- KN3_TCP_CSM
- KN3_TCP_EEHPR
- KN3_TCP_FTP_DSPINTV
- KN3_TCP_FTP
- KN3_TCP_GLBS
- KN3_TCP_INTE
- KN3_TCP_IPSEC
- KN3_TCP_INTS
- KN3_TCP_OSA
- KN3_TCP_ROUTE_TBL
- KN3_TCP_ROUTE_TBL_FREQ
- KN3_TCP_SAMPLE_INTERVAL
- KN3_SNMP_CONFIG_FILE
- KN3_TCP_TN3270
- KN3_TCP_TN3270_DSPINTV
- KN3_TCP_VIO_UNIT
- Define TCP monitoring systems member Note: Specify KN3_TCPXxx_* row for each TCP/IP monitored system. The global default is $$$$ (monitored all TCP/IP stack).
- KN3_TCPX
- KN3_TCPXnn_ROW
- KN3_TCPXnn_SYS_NAME
- KN3_TCPXnn_TCP_STC
- KN3_TCPXnn_TCPIP_PROFILES_DSN
- KN3_TCPXnn_OVRD_GLOBAL_FLAG
- KN3_TCPXnn_OVRD_COLLECT_STACK
- KN3_TCPXnn_OVRD_CONN
- KN3_TCPXnn_OVRD_IPSEC
- KN3_TCPXnn_OVRD_ROUTE_TBL
- KN3_TCPXnn_OVRD_ROUTE_TBL_FREQ
- KN3_TCP_ROUTE_TBL
- KN3_TCP_ROUTE_TBL_FREQ
- KN3_TCPXnn_OVRD_FTP
- KN3_TCPXnn_OVRD_FTP_DSPINTV
- KN3_TCPXnn_OVRD_TN3270
- KN3_TCPXnn_OVRD_TN3270_DSPINTV
- KN3_TCPXnn_TCPIP_PROFILES_MBR
- KN3_TCPXnn_OVRD_OSA
- KN3_TCPXnn_OVRD_GLBS
- KN3_TCPXnn_OVRD_INTE
- KN3_TCPXnn_OVRD_INTS
- Define TN3270 Telnet session link user values
- Enable Self-Describing Agent processing
- Audit parameters
- Persistent datastore table space allocation overrides
- Additional IBM Z OMEGAMON Network Monitor Agent
settings
- KN3_X_AGT_CONFIRM_SHUTDOWN
- KN3_X_AGT_KDC_DEBUG
- KN3_X_AGT_DEBUG_TRACE
- KN3_X_AGT_LGSA_VERIFY
- KN3_X_AGT_LSRPOOL_BUFFER_NUM
- KN3_X_AGT_LSRPOOL_BUFSIZE
- KN3_X_AGT_SDUMP_SVC_SYS1_DUMP
- KN3_X_AGT_STORAGE_LIMIT_EXTEND
- KN3_X_AGT_STORAGE_LIMIT_PRIMARY
- KN3_X_AGT_STORAGE_RESERVE_EXT
- KN3_X_AGT_STORAGE_RESERVE_PRI
- KN3_X_AGT_STORAGE_STGDEBUG
- KN3_X_AGT_TASKS_ATTACHED_NUM
- KN3_X_SECURITY_USER_EXIT
- KN3_X_SECURITY_RESOURCE_CLASS
- Agent nonstandard parameters