Broadcom 5719 QP 1G (1G/100M/10M) Network Interface Card PCIe x4 LP (FC EKFF)

Overview

The Broadcom 5719 QP 1G (1G/100M/10M) Network Interface Card PCIe x4 LP Adapter is a PCI Express (PCIe) x4 adapter. The adapter can be used in either an x4, x8 or x16 PCIe slot in the system. This adapter provides four 1 Gb Ethernet ports that can be configured to run at 1000 megabits per second (Mbps) or 1 gigabit per second (Gbps), 100 Mbps, or 10 Mbps. The adapter connects to a network that uses unshielded twisted pair (UTP) cable for distances of up to 100 meters (328.08 feet). The adapter supports AIX® Network Installation Management (NIM) boot capability. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter supports jumbo frames when running at the 1000 Mbps speed.

Specifications

Item

Description

Adapter FRU number

01EM698 (AOC-BCM5719-4P-BRC)

I/O bus architecture

PCIe x4.

Slot requirement

For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P or PCIe adapter placement rules for the 9006-22P.

Voltage

3.3 V, 12 V.

Form factor

Short, low-profile.

Attributes provided

4-Port machine access code (MAC).

High performance IPV4/IPV6 checksum offload.

Supports large send and large receive.

Multiple queues.

VIOS

Transceivers and cables

Cables 4-pair, CAT5e, UTP cables are connected to copper RJ45 connectors.

Supported cable length is more than 100 M.

Operating system or partition requirements