Emulex LPE16002B-M6-O Dual-port 16 Gb Fibre Channel Card PCIe3.0 x8 LP (FC EKAF)
Learn about the specifications and operating system requirements for the feature code (FC) EKAF adapter.
Overview
The Emulex LPE16002B-M6-O Dual-port 16 Gb Fibre Channel Card PCIe3.0 x8 LP is a PCI Express (PCIe) generation 3 (Gen3) x8 adapter. The adapter can be used in either a x8 or x16 PCIe slot in the system. The adapter features auto-negotiation, LDAP support and has a data transfer rate of 14.025 Gb/s.
Specifications
- Item
- Description
- Adapter FRU number
- 01EM694 (AOC-LPE16002B-M6-O)
- I/O bus architecture
- PCIe3 x8
- Slot requirement
- For more information about slot priorities, maximums, and placement rules, see the PCIe adapter placement rules for the 9006-12P or PCIe adapter placement rules for the 9006-22P
- Voltage
- 3.3 V, 12 V.
- Form factor
- Short, low-profile.
- Attributes provided
- Auto-negotiation.
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is
required to support the new feature and that you determine whether any prerequisites must be met for
this feature and attaching devices. To check for operating system and partition requirements,
see one of the following links:
- The latest version of enabling libraries and utilities can be downloaded from the Fix Central website.
- IBM® Prerequisite website.
- IBM System Storage Interoperation Center (SSIC)
- The latest version of the device driver or the IBM Power® RAID adapter utilities (iprutils) can be downloaded from the IBM Service and Productivity Tools website.
- For information about important notices for Linux on IBM Power Systems, see the Linux® on IBM website.
Important: For a list of known Linux operating system issues that may affect this
adapter, see the IBM Power LC readme
.