Setting the IP address in Windows XP and Windows 2000
To set the IP address within Windows XP and Windows 2000, complete these steps.
- Click Start > Control Panel.
- On the control panel, double-click Network Connections.
- Right-click Local Area Connection.
- Click Properties.
- Select Internet Protocol (TCP/IP),
and then click Properties. Attention: Record the current settings before making any changes. This will allow you to restore these settings if you disconnect the PC or notebook after setting up the ASMI Web interface.Note: If Internet Protocol (TCP/IP) does not appear in the list, do the following steps:
- Click Install.
- Select Protocol, and then click Add.
- Select Internet Protocol (TCP/IP).
- Click OK to return to the Local Area Connection Properties window.
- Select Use the Following IP Address.
- Complete the IP address, Subnet mask, and Default gateway fields by using the values in step 4 from Accessing the ASMI using a Web Browser.
- Click OK on the Local Area Connection Properties window. It is not necessary to restart your PC.
Parent topic: Setting the IP address on your PC or notebook
Last updated: Tue, September 18, 2018