Accessing HyperTerminal through the serial port

Set the parameters for the power-on sequence function by using a serial port (HyperTerminal interface).

To set the parameters for the power-on sequence function by using a serial port (HyperTerminal interface), complete the following steps:

  1. Make sure that the serial port configuration is 115200, 8-N-1-None.
  2. Log in as ADMIN/1001.
  3. Select the IBM PDU Configuration Utility menu and type 8 to select Set PDU Location and Outlet Information.
  4. Enter the GlobalDelayTimer value.
  5. On the main menu, enter the IndividualDelayTimer values for each outlet.
Parent topic: Power-on sequencing (some models)


Last updated: Wed, June 21, 2017