subscribe iconSubscribe to this information
POWER7 information

Performing an IBM i main storage dump by using the Hardware Management Console

You can perform a main storage dump by using aHardware Management Console (HMC) and IBM® i.

Note: Before performing a or main storage dump, collect any reference code information from the control panel or the HMC.
To perform a main storage dump from an HMC, complete the following steps:
Note: If a main storage dump occurred automatically, go to Managing dumps for information on how to copy, report, or delete a dump.
  1. In the navigation area, open Server and Partition.
  2. Select Server Management.
  3. In the contents area, expand Partitions.
  4. Right-click the logical partition and click Restart Partition.
  5. Click Dump.
  6. Click OK.
  7. For details on how to copy, report, or delete a dump after you have completed a dump, refer to Managing dumps.
Parent topic: Performing an IBM i main storage dump

Send feedback Rate this page

Last updated: Fri, March 20, 2015