Subscribe to this information
POWER7 information
Main storage dump status
During a main storage dump (MSD), the control panel shows MSD status system reference codes (SRCs).
During a main storage dump, the control panel shows MSD status SRCs (D1xx 3xxx and C6xx 44xx).
The main storage dump ends successfully if the Main Storage Dump Occurred display appears. The main storage dump ends unsuccessfully if a terminating SRC appears at the control panel.
Terminating system reference code
A
lit System Attention light indicates dump termination. The
terminating system reference code (SRC) displays after the main storage
dump completes.
- In the case of an automatic dump (system stopping, including a main storage dump), the normal terminating SRC is the one associated with the system error that started the dump.
- In the case of a manual dump (Function 22), the normal terminating SRC is a service processor completion code (A1xx 300x or B1xx xxxx):
| MSD status | Function performed |
|---|---|
| 11 xxxx xxxx | System terminating SRC. See Error recovery for dumps. |
| 11 A1xx 300x 11 A6xx4404 |
Main storage dump successful completion. See Copying a main storage dump. |
| 11 B1xx 4998 or 11 B1xx4698 or 11 B2xx5117 |
A valid main storage dump exists. Perform a complete IPL and try the MSD procedure again. |
| Note: x
can be any hexadecimal character (0 through 9, A through F).
|
|
