Total system power consumption

Use the System power requirements for 1.9 GHz processor systems table to determine the total system power consumption for your server's configuration.

The following table contains the maximum power requirements for model 9118-575.

Table 1. System power requirements for 1.9 GHz processor systems (9118-575 only) - (kW)
Processor drawers^{8, 9}	I/O drawers and switch drawers
Processor drawers^{8, 9}	0	1	2	3	4	5	6
1	3.7⁴	4.9⁴	5.9^1,⁴	7.0^2,⁴
2	6.9⁴	8.1⁴	9.2⁴	10.3^1,⁴	11.4^2,⁴
3	10.2⁴	11.3⁴	12.4⁴	13.6⁴	14.7^1,⁴	15.8^2,⁴
4	13.5⁴	14.6⁴	15.6⁴	16.8⁴	17.9⁴	19.0^1,⁵	20.1^1,⁵
5	16.7⁴	17.8⁴	18.9⁵	20.0⁵	21.2⁵	22.3^3,⁵
6	19.9⁵	21.1⁵	22.2⁵	23.3^{6, 10}	24.4^{6, 10}	25.5^{3, 6, 10}
7	23.2^{6, 10}	24.3^{6, 10}	25.4^{6, 10}	26.5^{6, 10}	27.6^{3, 6, 10}	28.8^{3, 6, 10}
8	26.4^{6, 10}	27.6^{6, 10}	28.7^{6, 10}	29.8^{6, 10}	30.9^{3, 6, 10}
9	29.7^{6, 10}	30.8^{6, 10}	31.9^{7, 10}	33.0^{7, 10}	34.1^{3, 7, 10}
10	32.9^{7, 10}	34.0^{7, 10}	35.2^{7, 10}	36.3^{7, 10}
11	36.2^{7, 10}	37.3^{7, 10}	38.4^{3, 7, 10}	39.5^{7, 10}
12	39.4^{7, 10}	40.5^{7, 10}	41.6^{3, 7, 10}

The following notes apply to the preceding table.

Note:

This configuration is valid only when populated with one 7045-SW4 switch drawer.
This configuration is valid only when populated with two 7045-SW4 switch drawers.
Not supported with integrated battery backup.
Power cord rules for this configuration:
60 A cord allowed 60 A cord redundant
480 V ac (30-A cord)

380 - 415 V ac (no plug)

Yes Yes Yes
Power cord and bulk power jumper rules for this configuration:
60 A cord allowed 60 A cord redundant
480 V ac (30-A cord)

380 - 415 V ac (no plug)

Yes No Yes
Power cord and bulk power jumper rules for this configuration:
60 A cord allowed 60 A cord redundant
480 V ac (30-A cord)

380 - 415 V ac (no plug)

Yes No No
Power cord and bulk power jumper rules for this configuration:
60 A cord allowed 60 A cord redundant
480 V ac (30-A cord)

380 - 415 V ac (no plug)

No Not applicable No
The maximum number of processors drawers per system is the total number of FC7836, FC7657, FC7675, and FC7676 that can be combined to a maximum of 12.
For each FC7657, FC7675, and FC7676 installed, subtract 0.2 kW from the total system power specified in this table.
A bulk power jumper (BPJ) is provided for this configuration. The presence of the BPJ prevents the concurrent maintenance of the bulk power controllers (BPC) and bulk power distributors (BPD) in the bulk power assemblies.

60 A cord allowed	60 A cord redundant	480 V ac (30-A cord) 380 - 415 V ac (no plug)
Yes	Yes	Yes

60 A cord allowed	60 A cord redundant	480 V ac (30-A cord) 380 - 415 V ac (no plug)
Yes	No	Yes

60 A cord allowed	60 A cord redundant	480 V ac (30-A cord) 380 - 415 V ac (no plug)
Yes	No	No

60 A cord allowed	60 A cord redundant	480 V ac (30-A cord) 380 - 415 V ac (no plug)
No	Not applicable	No

Maximum configurations are based on 64 memory cards per processor, two disk drives and four PCI adapter cards. To determine the typical power consumption for a specific configuration, subtract the following typical power values.

Component	Typical power value (W)
Disk drives	20
PCI adapter card	20
Memory cards	10

Send feedback | Rate this page

Last updated: Tue, June 17, 2014