Installing the Virtual I/O Server and enabling the Integrated Virtualization Manager on an IBM System p server

When you install the Virtual I/O Server in an environment where no Hardware Management Console (HMC) is present, the Virtual I/O Server automatically creates a management partition whose interface is the Integrated Virtualization Manager.

Before you start, ensure that you have completed the following tasks:

Verify that you have cabled the server. Specifically, ensure that you have connected a serial cable from a PC or ASCII terminal to a system port on the server.
Verify that you have access to the Advanced System Management Interface (ASMI) using the Web interface.
Verify that you have the Administrator or Authorized server provider authority level in ASMI.
If your system did not come with the Advanced POWER® Virtualization feature enabled, you must use the ASMI to enter the activation code that you received when you ordered the feature. For instructions, see Entering the activation code for Advanced POWER Virtualization with the ASMI.
If your system came with the Advanced POWER Virtualization feature enabled, complete the following tasks:
1. Using the Web-based ASMI, change the partition boot mode:
  1. In the navigation area, expand Power/Restart Control.
  2. Click Power On/Off System.
  3. Select Boot to SMS menu in the AIX/Linux partition mode boot field.
  4. Click Save settings and power on.
2. Open a terminal session on the PC, using an application such as HyperTerminal, and wait for the SMS menu to appear. Be sure the line speed is set to 19,200 bits per second to communicate with the system unit.
3. Using the Web-based ASMI, change the partition boot mode back so that the server loads the operating environment during startup:
  1. Expand Power/Restart Control.
  2. Click Power On/Off System.
  3. Select Continue to operating system in the AIX/Linux partition mode boot field.
  4. Click Save settings.

To install the Virtual I/O Server and enable the Integrated Virtualization Manager, complete the following steps:

Insert the Virtual I/O Server CD or DVD into the optical drive.
In SMS, select the CD or DVD as the boot device:
1. Select Select Boot Options, and then press Enter.
2. Select Select Install/Boot Device, and then press Enter.
3. Select CD/DVD, and then press Enter.
4. Select the media type that corresponds to the optical device, and then press Enter.
5. Select the device number that corresponds to the optical device, and then press Enter.
6. Exit the SMS menu by pressing the x key, and confirm that you want to exit SMS.
Install the Virtual I/O Server:
1. Select the console, and then press Enter.
2. Select a language for the BOS menus, and then press Enter.
3. Select Start Install Now with Default Settings.
4. Select Continue with Install. The managed system restarts after the installation is complete, and the login prompt is displayed on the ASCII terminal.

After you install the Integrated Virtualization Manager, finish the installation by accepting the license agreement, checking for updates, configuring the TCP/IP connection. For instructions, see Finishing the Integrated Virtualization Manager installation.