POWER5 information

Related procedures

Before you begin
Understand prerequisites for installing, removing, or replacing features and parts.
Start or stop the system or logical partition
Learn how to start or stop a system or logical partition.
Place the rack-mounted model 7047-185 or 7037-A50 in the service position or operating position
You might need to place a system or expansion unit into the service position or operating position to perform service or gain access to internal components. Use the instructions in this section to perform these tasks.
Place the rack-mounted system or expansion unit in the service position or operating position
You might need to place a system or expansion unit into the service position or operating position to perform service or gain access to internal components. Use the instructions in this section to perform these tasks.
Open the model 505 service access panel
You might need to open the service access panel to perform service on the fans, control panel, or to access other internal components. Use the procedure in this section to perform this task.
Place the model 51x or 710 in the service position
You might need to place a system into the service position to perform service or gain access to internal components. Use the instructions in this section to perform this task.
Place the model 51x or 710 in the operating position
You might need to place a system into the operating position to make the system available for use. Use the procedure in this section to perform this task.
Model 285, 52x, 55x, or OpenPower 720 door
You might need to remove and replace the front door of a stand-alone model. This section includes procedures so that you can perform this task.
Front cover
You might need to remove, replace, or install covers to access components or perform service. Use the instructions in this section to accomplish these tasks.
Remove the front cover from the model 51x or 710
You might need to remove the cover to access components or perform service. Use the procedure in this section to accomplish this task.
Install the front cover on the model 51x or 710
You might need to install the cover after accessing components or performing service. Use the procedure in this section to accomplish this task.
Gain access to the model 51x and OpenPower 710 control panels
Since only part of the control panel is visible from the front of the server, you can use this procedure to gain access to all of the control panel's features, including the display.
Model 285, 51x, 52x, 55x, 710, or OpenPower 720 service access cover
You might need to remove and replace the service access cover to perform service or gain access to internal components. Use the instructions in this section to accomplish these tasks.
Install a feature using the Hardware Management Console
You might need to use the Hardware Management Console to install a feature. Use the procedure in this section to perform this task.
Remove a part using the Hardware Management Console
You might need to use the Hardware Management Console to facilitate removing a part from your managed system. Use the procedure in this section to accomplish this task.
Replace a part using the Hardware Management Console
You might need to use the Hardware Management Console to replace a part in your managed system. Use the procedure in this section to accomplish this task.
Identify a failing part
Use the instructions in this section to learn how to locate and identify a failing part on your system or expansion unit using the appropriate method for your system.
Verify the installed part
Use the instructions in this section to learn how to verify a newly installed or replaced part on your system, logical partition, or expansion unit by selecting the appropriate procedure for the operating system or console.
Remove the control panel with power off
You might need to remove the control panel from the server with the power off. Use the procedure in this section to perform this task.
Remove the control panel with power on
You might need to remove the control panel from the server. Use the procedure in this section to perform this task.
Replace the control panel with power on
You might need to replace the control panel from the server with the power on. Use the procedures in this section to perform this task.

Parent topic: Voltage regulator

Send feedback | Rate this page

Last updated: Fri, Oct 30, 2009