subscribe iconSubscribe to this information
POWER5 information

Remove the front cover from the model 9116-561 or 570

You might need to remove the cover to access components or perform service. Use the procedure in this section to accomplish this task.

To remove the front cover follow these steps:

  1. If necessary, open the front rack door.
  2. Loosen the thumbscrew on the right side of the cover as shown in the following figure.
    Remove the system unit front cover
  3. Slide the cover to the right and remove it from the system unit.
Parent topic: Front cover for the model 9116-561 or 570
Send feedback | Rate this page

Last updated: Fri, Oct 30, 2009