Function 10: Display the temperature on the 7037-A50 and 7047-185 models

This function displays the temperature on the 7037-A50 server and the 7047-185 workstation.

This function is available in both normal and manual operating mode.

The display alternates every two seconds between ambient, CPU1, and CPU2 temperature.

The following table provides details about this function.

Table 1. Function 10 on the 7037-A50 and 7047-185 models
Function/Data	Action or description
1 0 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _	Use the Increment or Decrement buttons to scroll to function 10.
A m b i e n t : 3 e , 3 e _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _	Press Enter to start function 10. The ambient temperature is listed in hexadecimal (degrees Celsius). The first value is the average temperature over a time span. The last value is the most recent temperature reading.
C P U 1 : 5 0 , 6 f _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _	Press Enter to start function 10. The CPU1 temperature is listed in hexadecimal (degrees Celsius). The first value is the average temperature over a time span. The last value is the most recent temperature reading.
C P U 2 : 0 , 0 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _	Press Enter to start function 10. The CPU2 temperature is listed in hexadecimal (degrees Celsius). The first value is the average temperature over a time span. The last value is the most recent temperature reading. The reading is 0 if the system is one-way.
1 0 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _	Use the Increment or Decrement buttons to scroll through the control panel functions.