subscribe iconSubscribe to this information

Function 02: Select IPL type, IPL speed override, system operating mode, and firmware mode

This function allows you to select the IPL type and logical key mode when the system is either powered on or off.

This function is available in both normal and manual operating mode.

Before you can select the IPL speed, the system must be at power on standby.

For powered-on systems, function 02 is used to select the operating system (OS) IPL type, system operation mode, or firmware IPL mode. The following table shows an example of the function 02 IPL type, system operating mode, and firmware IPL mode selection sequence for a powered-on system.

Table 1. Function 02: Select IPL type, system operating mode, and firmware IPL mode on powered-on systems
Function/Data Action or description 
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll to function 02. 
0 2 _ _ A < _ M _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ P _ _ _
 Press Enter to start function 02.
  • The current OS IPL type is displayed with a pointer.
  • The current system operating mode is displayed.
  • The current firmware mode is displayed.
 
0 2 _ _ B < _ M _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ P _ _ _
 Use the Increment or Decrement buttons to scroll through the OS IPL types. 
0 2 _ _ B _ _ M < _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ P _ _ _
 Press Enter to select the OS IPL type.
  • The current OS IPL type is displayed.
  • The current system operating mode is displayed with a pointer.
  • The current firmware mode is displayed.
 
0 2 _ _ B _ _ N < _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ P _ _ _
 Use the Increment or Decrement buttons to scroll through the system operating modes. 
0 2 _ _ B _ _ N _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ P < _ _
 Press Enter to select the system operating mode.
  • The current OS IPL type is displayed.
  • The current system operating mode is displayed.
  • The current firmware mode is displayed with a pointer.
 
0 2 _ _ B _ _ N _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ T < _ _
 Use the Increment or Decrement buttons to scroll through the firmware IPL modes. 
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to select the firmware IPL mode and exit function 02. 
0 1 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll through the control panel functions.

For powered-off systems, function 02 is used to select the OS IPL type, system operating mode, system IPL speed, and firmware IPL mode. The following table shows an example of the function 02 OS IPL type, system operating mode, system IPL speed, and firmware IPL mode selection sequence for a powered-off system.

Table 2. Function 02: Select IPL type, system operating mode, system IPL speed, and firmware IPL mode on powered-off systems
Function/Data Action or description 
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll to function 02. 
0 2 _ _ A < _ M _ _ _ _ V _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ T _ _ _
 Press Enter to start function 02.
  • The current OS IPL type is displayed with a pointer.
  • The current system operating mode is displayed.
  • The current IPL speed is displayed.
  • The current firmware IPL mode is displayed.
 
0 2 _ _ B < _ M _ _ _ _ V _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ T _ _ _
 Use the Increment or Decrement buttons to scroll through the OS IPL types. 
0 2 _ _ B _ _ M < _ _ _ V _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ T _ _ _
 Press Enter to select the IPL type.
  • The current IPL type is displayed.
  • The current system operating mode is displayed with a pointer.
  • The current IPL speed is displayed.
  • The current firmware IPL mode is displayed.
 
0 2 _ _ B _ _ N < _ _ _ V _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ T _ _ _
 Use the Increment or Decrement buttons to scroll through the system operating modes. 
0 2 _ _ B _ _ N _ _ _ _ V < _ _
_ _ _ _ _ _ _ _ _ _ _ _ T _ _ _
 Press Enter to select the system operating mode.
  • The current IPL type is displayed.
  • The current system operation mode is displayed.
  • The current IPL speed is displayed with a pointer.
  • The current firmware IPL mode is displayed.
 
0 2 _ _ B _ _ N _ _ _ _ S < _ _
_ _ _ _ _ _ _ _ _ _ _ _ T _ _ _
 Use the Increment or Decrement buttons to scroll through the IPL speeds. 
0 2 _ _ B _ _ N _ _ _ _ S _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ T < _ _
 Press Enter to select the IPL speed.
  • The current IPL type is displayed.
  • The current system operation mode is displayed.
  • The current IPL speed is displayed.
  • The current firmware IPL mode is displayed with a pointer.
 
0 2 _ _ B _ _ N _ _ _ _ S _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ P < _ _
 Use the Increment or Decrement buttons to scroll through the firmware IPL modes. 
0 2 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Press Enter to select the firmware IPL mode and exit function 02. 
0 1 _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 Use the Increment or Decrement buttons to scroll through the control panel functions.
Parent topic: Primary control panel functions
Send feedback | Rate this page

Last updated: Fri, Oct 30, 2009