HPSB001

Use this procedure to isolate power subsystem problems reported through the HPS Network Management path.

1. Does the 8 digit reference code begin with 101F?
   • Yes: Refer to Appendix A, section "101FXXXX FRU identification codes" in the High Performance Switch Planning, Installation, and Service for eServer™ p5 servers manual. This ends the procedure.
   • No: Go to 2.
2. Does the 8 digit reference code begin with 101A or 101B?
   • Yes: Go to MAP 1520 Power in the High Performance Switch Planning, Installation, and Service for eServer p5 servers manual. This ends the procedure.
   • No: Go to Starting a Service Call in the High Performance Switch Planning, Installation, and Service for eServer p5 servers manual. This ends the procedure.