Display resources associated with IOP

This option displays the selected IOP and lists all devices that are logically attached to it.

From packaging displays

The Resources associated with IOP option is available only on the Logical Hardware Resources on System Bus display. For details, see Display system bus resources. To access resources associated with the I/O processor, you must select the Logical hardware resources option on the main Hardware Service Manager display, and then select the System bus resources option.

From logical displays

The Resources associated with IOP option is available only on the Logical Hardware Resources on System Bus display. For details, see Display system bus resources. This option displays the selected IOP and lists all devices that are (logically) attached to it. If more than one IOP is selected, the list contains all the IOPs and their logically attached resources.

Figure 1. Example Logical Hardware Resources Associated with IOP display

              Logical Hardware Resources Associated with IOP
 
Type options, press Enter.
2=Change detail    4=Remove    5=Display detail    6=I/O Debug
7=Verify           8=Associated packaging resource(s)
 
                                                               Resource
Opt  Description                    Type-Model  Status         Name
 _   Multiple Function IOP     *    9162-001    Operational    CMB01
 _    Disk Controller               6606-030    Operational    DC02
 _     Disk Unit               *    6606-030    Operational    DD002
 _    Disk Controller               6605-030    Operational    DC01
 _     Disk Unit                    6605-030    Operational    DD001
 _    Tape Controller               6380-001    Operational    DC03
 _     Tape Unit                    6380-001    Operational    TAP01
 
 
 
 
 
F3=Exit   F5=Refresh   F6=Print   F8=Include non-reporting resources   
F9=Failed resources    F10=Non-reporting resources  
F11=Display serial/part numbers      F12=Cancel