Create frame information

If you change detail or reserve frame space for a frame ID that currently does not exist, the following message appears:

Containing hardware resource does not
exist.  Press F10 to create.

To create the frame information, perform the following steps:

1. Press the Create containing hardware resource function key. The following display appears and allows you to select the type of packaging hardware resource (frame) to contain the resource you selected.
   Figure 1. Example Select Packaging Model display

                  Select Packaging Model
    
   Type option, press Enter.
   1=Select
    
   Opt Description                    Type-Model
    _  Rack Enclosure                 9309-002
    _  Rack Enclosure                 9309-001
    _  Rack Enclosure                 5044-
    
    
    
    
    
    
    
    
    
    
    
    
    
   F3=Exit      F6=Print      F12=Cancel
    

   Note: The Create containing hardware resource function key is not available for all resources.
2. After you select the frame information and press Enter, the Define Frame Packaging Detail display appears. This display allows you to define the following frame information:
   • Resource name
   • Serial number
   • Location text
   • Service provider
   • Alternate remote telephone
   • Alternate service node
   • Alternate service telephone
   • Owning system type
   • Owning system model
   • Owning system serial number
3. When you press Enter, the data is verified and used to create a new packaging resource. If no errors are found, you will return to the original change detail or reserve frame space display.
4. Press Enter from that display to complete the change and return to the previous packaging list display. You can view this newly created packaging hardware resource in the list of frames on the Packaging Hardware Resource display.