Model 9406-270 server specifications

Server specifications provide detailed information for your server, including dimensions, electrical, power, temperature, environment, and service clearances.

Use the following specifications to plan for your server.

Table 1. Server specifications
Pictured is model 9406-270. The 7104 expansion unit is available with model 9406-270. The 7104 expansion unit requires a power cord. Dimensions are shown for model 9406-270 only.
Dimensions	9406-270 Width	9406-270 with 7104 Width	9406-270 Depth	9406-270 Height
Metric	366 mm	552 mm	728 mm	610 mm
English	14.5 in.	21.9 in.	28.7 in.	24.0 in.
	Model 9406-270		Model 9406-270 with 7104
Maximum configuration weight	52.7 kg (116 lb.)		79.5 kg (175 lb.)
Electrical	Model 9406-270		7104 expansion unit
Maximum kVA (each has its own power cord)	0.421		0.368
Rated voltage and frequency³	100-127/200-240 V ac at 50-60 plus or minus 0.5 Hz
Thermal output (maximum)	1365 Btu/hr		1194 Btu/hr
Power requirements (IP measurement) maximum (watts)	400		350
Power factor	0.95
Inrush current	41 A
Leakage current (maximum)	3.5 mA
Phase	1
Compatible plug types	4, 5, 6, 10, 18, 19, 22, 23, 24, 25, 32, 34
Power cord length	2.7 m (9 ft.), 1.8 m (6 ft.) (U.S. and Canada only), 4.3 m (14 ft.)
Temperature requirements
Operating	10 degrees to 38 degrees C (50 degrees to 100.4 degrees F)
Nonoperating	1 degrees to 60 degrees C (33.8 degrees to 140 degrees F)
Environment requirements	Operating		Nonoperating
Noncondensing humidity	8 to 80%		8 to 80%
Wet bulb temperature	23 degrees C (73.4 degrees F)		27 degrees C (80.6 degrees F)
Maximum altitude	3048 m (10000 ft.)
Noise emissions¹	Operating		Idle
L_WAd (Category 2E, General business) 9406-270 only	5.9 bels		5.8 bels
L_WAd (Category 2E, General business) 9406-270 with 7104	6.3 bels		6.1 bels
L_pAm (1-meter bystander) 9406-270 only	41 dB		40 dB
L_pAm (1-meter bystander) 9406-270 with 7104	45 dB		43 dB

Service clearances
Front	Back	Sides ²	Top ²
762 mm	762 mm	762 mm	762 mm
30 in.	30 in.	30 in.	30 in.
Notes: For a description of noise emission values, see Acoustics. Side and top clearances are optional when operating. The power supplies automatically accept any voltage with the published rated voltage range. If dual power supplies are installed and operating, the power supplies draw approximately equal current from the utility (mains) and provide approximately equal current to the load.