This option specifies all power cords for the ordered system unit
to be low voltage (100-127 V ac).
The following conditions apply to the use of this option.
- The 2960 option affects the power cord for the models 200, 20S, and 4xx System
Units; the 3xx, 5xx, 600, and S10 System Towers; and the 5060,
5061, 5062, 5063, 5070, 5072, 5080, and 5082 expansion units.
- This voltage feature is not used by the models
620, 640, 650, 7xx, and 9406-8xx; the models S20, S30, S40,
SB1, SB2, and SB3; the 5071, 5073, 5074, 5079, 5065, 5066, 5075, 5081, 5083,
and Expansion Units; and the 5033, 5034, 5035, and 5077 Migration Units.
- You can add the specification codes 9080, 9082, and 9083 in
addition to 2960 to specify other attributes of the line-cord such as length
and plug type.
- You must specify the I/O side of 530 and 53S system
towers separately, using either 2960 or 2961.
- 2961 is not allowed on
the same power cord as 2960.
Subscribe to this information