| ESA0xxxx error codes | Message | Recovery action |
|---|---|---|
| ESA00001 | You must enter a valid IBM® ID. | |
| ESA00002 | Issuing authorization request for the following IBM IDs: {0} | |
| ESA00003 | Issuing authorization request for the following IBM ID's: {0}{1} | |
| ESA00004 | Your Hardware Management Console is not currently configured for remote service. Ensure that this Hardware Management Console is configured for remote service under Remote Support. | See Enabling remote support on the HMC. |
| ESA00005 | The application can not currently find access to a call
home server. Ensure that one of your Hardware Management Console's is configured as a call home server under Remote Support. |
See Enabling remote support on the HMC. |
| ESA00006 | Your Hardware Management Console is not currently configured for remote service and can not currently find access to a call home server. Ensure that this Hardware Management Console is configured for remote service and that one of your Hardware Management Console's is configured as a call home server under Remote Support. | See Enabling remote support on the HMC. |
| ESA00007 | Remote Support is not currently supported on this Hardware Management Console. | |
| ESA00008 | A request to authorize users was successfully created. | |
| ESA00009 | An attempt to create an authorize users request was unsuccessful. | |
| ESA0000A | You must select an email address to perform the desired operation. | |
| ESA0000B | Successfully removed the following email addresses: {0} | |
| ESA0000C | Successfully sent email to the following addresses: {0} | |
| ESA0000D | Transmit of email request was unsuccessful. Ensure that the SMTP server and Port number specified are correct. | |
| ESA0000E | A request to transmit service information has been successfully created. Once the data has been gathered it will be transmitted. | |
| ESA0000F | Successfully updated the frequency and time when the scheduled transmission of service information will occur. | |
| ESA00010 | Successfully updated settings. | |
| ESA00011 | Unsuccessfully sent email to the following addresses: {0} Ensure that the email address(s) is specified correctly and retry the operation. | |
| ESA00012 | When you enable email notification, you must specify both an SMTP server and port number. | |
| ESA00013 | A request to transmit performance management information
has been successfully created. Once the data has been gathered it will be transmitted. |