Setting the frequency and voltage by using high frequency policy

You can use the Advanced System Management Interface (ASMI) to enable or disable the high frequency policy.

Before you begin

To perform this operation, your authority level must be an authorized service provider.

About this task

When the high frequency policy is enabled, you can set the Nest frequencies and voltages for higher performance.
Note: When the high frequency trading function is enabled, the following features are disabled:
  • On-chip controller (OCC)
  • Ability to guard the system from hardware failures (also called as Gard)

To enable or disable the high frequency policy, complete the following steps:

Procedure

  1. On the ASMI Welcome pane, specify your user ID and password, and click Log In.
  2. In the navigation area, expand System Configuration.
  3. Click High Frequency Policy.
  4. From the High Frequency Policy list, select Enabled or Disabled.
  5. Click Save settings.