sas3ircu commands

Learn about the sas3ircu command. This command can be used for the feature code EKAB PCIe adapter.

If the sas3ircu command is not installed, download the utility from ftp://ftp.supermicro.com/driver/P8DTU/. You can find the download by searching that site for sas3ircu; currently: LSI MegaRAID and HBA (AOC-Utility) > SMC-Broadcom (Supermicro 12Gbs SAS HBA - AOC-S3008L-L8i) > AOC-S3008L-L8i > Tools.

To install:
  1. Download the sas3ircu command.
  2. Copy the sas3ircu command file to the /usr/local/bin directory.
  3. To enable the command to be executed, as root, run the command: 
    chmod +x sas3ircu
General SAS3IRCU command syntax:
sas3ircu <controller_#> <command> <parameters>
To list the controllers:
sas3ircu list
To show the controller status:
sas3ircu <controller_#> status
To turn on the drive light:
sas3ircu <controller_#> locate <Enclosure:Bay> ON
To turn off the drive light:
sas3ircu <controller_#> locate <Enclosure:Bay> OFF
To view additional help for the command:
sas3ircu help
To list all adapters:
sas3ircu list
To display adapter details and drive details:
sas3ircu <controller_#> display