The lsdev command lists the connection and status information of all storage systems managed by the heat map transfer utility.
>>-lsdev -+--------+--+-------------+-------------------------->< +- -help-+ '- -checkconn-' +- -h----+ '- ?-----'
Parameters
- -help | -h | -?
- (Optional) Displays the heat map transfer utility help for this command.
- -checkconn
- (Optional) Indicates whether to query the system for the connection status and display the result. If unspecified, a dash ("-") is displayed as the value for the ConnStatus (connection status) field.
Example: lsdev –checkconn
DevId HMC1 HMC2 ConnStatus UserName
IBM.2107-75NR551 address.com address.com Running admin
Report field definitions for ConnStatus (connection status)
- Running
- Indicates that the storage system is connected with heat map transfer enabled.
- -
- Indicates that the heat map transfer utility does not query the connection status from the heat map transfer service.
- Not Available
- Indicates that the heat map transfer feature is not enabled on the storage system. This can be due to the heat map transfer feature being disabled or not installed, or the Easy Tier feature disabled.
- Authentication fail
- Indicates that the connection was established but the specified user name or password criteria was invalid.
- Cannot connect
- Indicates that a connection to the storage system could not be established because the host cannot be reached.
- IP Invalid
- Indicates that either the IP address (hmc1) or the secondary IP address (hmc2) are not assigned to the same storage system.
- DevId Invalid
- Indicates that the identifier provided for the storage facility image is not consistent with the actual one of the storage system.
- Invalid
- Indicates that a connection cannot be established to the storage system for other, unknown reasons.