Replacing a power supply in the 8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX system

To remove a power supply, complete the steps in this procedure.

1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. Replace the power supplies as shown in Figure 1.
   1. Place your other hand underneath the power supply.
   2. Align the power supply (A) with the bay with the fan to the left.
   3. Slide the power supply into the system until the latch (B) locks in place.
   4. Repeat steps 2.a - 2.c for the other power supply.

   

3. Reconnect the power cords to the power supplies.
   For instructions, see Connecting power cords to an 8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, or 8335-GTX system.