SIP3149

Use this procedure to resolve the following problem: Incomplete multipath connection between adapter and remote adapter (SRC xxxx9075)

About this task

The possible cause is a failure in the embedded SAS fabric. Use the following table to determine the service action to perform.

Table 1. Service actions for a failure in the embedded SAS fabric
Location of device or devices	Service action
5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S	This isolation procedure is not supported on these models. Contact your next level of support.
9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, or 9223-42S	Replace the following FRUs, one at a time, in the order shown until the problem is resolved. See 9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, or 9223-42S locations to determine the location, part number, and replacement procedure to use for each FRU. Replace the adapter that logged the error. PCIe3 x8 cache SAS RAID internal adapter (U`n`-P1-C49 and U`n`-P1-C49-E1 or U`n`-P1-C50 and U`n`-P1-C50-E1) Replace the partner adapter of the adapter that logged the error. PCIe3 x8 cache SAS RAID internal adapter (U`n`-P1-C49 and U`n`-P1-C49-E1 or U`n`-P1-C50 and U`n`-P1-C50-E1) Replace the system backplane at location U`n`-P1.
9040-MR9	This isolation procedure is not supported on these models. Contact your next level of support.
9080-M9S	This isolation procedure is not supported on these models. Contact your next level of support.

This ends the procedure.