Power Development Platform (PDP)
Software Product Compatibility Reports is an innovative new tool designed to allow customers to easily generate custom reports about compatible IBM software combinations, product end-of-service dates and product translations. Using this tool, customers may create reports about a product's compatibility with operating systems, prerequisite software or virtualization environments. Customers may also use the tool to create tailor-make graphical reports about a set of product's end of service dates. Lastly, using the Software Product Compatibility Reports tool a customer can create reports about the translations available for a product or all the products that have been translated into a specific language.
The tool is now available for use here http://publib.boulder.ibm.com/infocenter/prodguid/v1r0/clarity/index.html
Jwestern 110000974Y 7.586 Visualizações
Testing Docker on the IBM Power Development Cloud
By John Jacobson, IBM Cloud Technical Specialist
There have been a few other blog posts written about Docker on Power (see references at the end of this article) so while this is not the first article written about this topic, this is my account of leveraging the IBM Power Development Cloud (PDP) to test and gain familiarity with this container technology on IBM Power Systems....for free.
The Virtual Server Request
The PDP currently provides Virtual Server access for Power Systems. This is not a Container as a Service like they offer in Bluemix. However, this does not mean you cannot request a virtual server and get Docker running yourself.
To request Virtual Server access on the PDP, follow the easy steps in the Create reservation user guide https://public.dhe.ibm.com/partnerworld/pub/pdp/create_pdp_reservation_guide.pdf
When making your request, be sure to specify the 'Ubuntu Linux' as the Image category and 'Docker on Ubuntu 16.04' under Select an image.
Once the reservation is available, you can run a few commands to see that docker is installed
$ sudo docker version
$ sudo dpkg -l docker.io
Check to see if if the docker service is started
$ sudo service docker status
Jun 11 10:05:27 sys-5920 docker: time="2015-06-11T10:05:27-04:00" lev...)"
If docker is not started issue the following command and check the status again
$ sudo service docker start
$ sudo service docker status
The Docker installation creates a local private network on the virtual server instance. This means by default you won't be able to access your containers unless you expose the particular port. I found a couple different ways to do this. One using the Dockerfile (EXPOSE) as well as deploying the container with -p PORT:PORT. There is an example of this further down in this article.
docker0 Link encap:Ethernet HWaddr 56:84:7a:fe:97:99
eth0 Link encap:Ethernet HWaddr 52:54:00:8c:6a:18
If you did not request the Docker image above or you are testing in your own environment here are the steps to install Docker...
Looking at various blogs, there are multiple methods to install docker.
$ sudo dpkg -i docker.io-1.4.1-dev_ppc64el.deb
$ sudo echo deb http://ftp.unicamp.br/pub/ppc64el/ubuntu/14_10/docker-ppc64el/ utopic main >> /etc/apt/sources.list
$ sudo apt-get update
$ sudo apt-get install docker.io
NOTE: As of Ubuntu 15.04 Vivid Vervet, Docker version 1.5 is included. Therefore the apt repository ftp.unicamp.br is not required.
$ sudo apt-get update
$ sudo apt-get install docker.io
Check the the installation and status of the docker status using the commands that were previously covered.
Create and Run your own initial base image
There are a couple different methods to get a base image up and running. I tested only the first one as it seemed to be the easiest to get things up and running.
$ cat ubuntu-core-14.10-core-ppc64el.tar.gz | sudo docker import - ubuntucore-ppc64le
$ sudo docker images
REPOSITORY TAG IMAGE ID CREATED VIRTUAL SIZE
NOTE: Other ubuntu-core images can be found here ubuntu-core images can be found here http://cdimage.ubuntu.com/ubuntu-core/
Since I didn't test Method 2, I don't have any notes to share. If you want to try it, its described in Step 2 here https://www.ibm.com/developerworks/library/d-docker-on-power-linux-platform/
Once I had the image created, I issued the following command to run it. This created the container and allows an interactive shell.
$ sudo docker run -t -i ubuntucore-ppc64le:latest /bin/bash
NOTE: flags -i interactive -t allocate pseudo tty
Container Images can be tagged with a label to help identify it. Tags are typically used to specify versioning.
$ sudo docker tag c2511a3aafad ubuntucore-ppc64le:14.10
$ sudo docker images
Run Registry images
One of the features of Docker is the portability of images. Docker hub and private registries are services that enable the sharing of images. So I went to http://hub.docker.com, clicked on Browse & Search and entered 'ppc64le'. This returned a number of images, so I thought I would download and test.
Here's a list of what I found!
Pull and run image
To test pulling and running an existing registry image, issue the following commands
$ sudo docker pull schabrolles/odoo_psql_ppc64le
$ sudo docker run -d -p 8069:8069 schabrolles/odoo_psql_ppc64le
To see that the container is running issue the command
$ sudo docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
We can see port 8069 is mapped/exported to the docker host IP:port so you can visit http://<IP_ADDRESS_OF_VIRTUAL_SERVER_RESERVATION>:8069
Create and run your own Container Image (Dockerize) So we've seen how an existing container image was pulled from the registry so let's look at how a container image is built. Container images are built using a Dockerfile. More details on Dockerfile can be found here https://docs.docker.com/reference/builder/
On the Virtual Server issue the following commands
$ mkdir -p ~/dockerize/mongodb
$ cd ~/dockerize/monogdb
$ touch Dockerfile
Then add the following to the Dockerfile
MAINTAINER John Jacobson email@example.com
RUN echo "deb http://ports.ubuntu.com/ubuntu-ports/ utopic universe" | tee /etc/apt/sources.list.d/ubuntu-utopic.list && \
sudo apt-get update && \\
mkdir -p /data/db
NOTE: Consider the use of $(lsb_release -sc) instead of hardcoding the ubuntu release name. This allows portability of your Dockerfile across different versions of the Distro.
i.e. RUN echo "deb http://ports.ubuntu.com/ubuntu-ports/ $(lsb_release -sc) universe" | tee /etc/apt/sources.list.d/ubuntu-$(lsb_release -sc).list
Build the container
To build the container, issue the following command from the directory ~/dockerize/monogdb
$ sudo docker build -t mongodb-ppc64:latest .
Sending build context to Docker daemon 2.56 kB
deb http://ports.ubuntu.com/ubuntu-ports/ utopic-updates universe
paring to unpack .../libpcap0.8_1.6.2-1_ppc64el.deb ...
Setting up mongodb-clients (1:2.6.3-0ubuntu5) ...
Adding system user `mongodb' (UID 101) ...
Processing triggers for libc-bin (2.19-10ubuntu2) ...
Step 3 : EXPOSE 27017
---> Running in 90b960218f64
Some of the bulid steps have been omitted but in the end you should see a message indicating that the container was successfully built
List new container image
To see our new container image issue the following command
$ sudo docker images | grep mongodb
NOTE: We use grep as to filter our the list of images to just ones containing mongodb
Run the container
To run the newly created mongodb container, issue the following command
$ sudo docker run mongodb-ppc64le
usr/bin/mongod --help for help and startup options
Additional Container Tasks
To remove an image, issue the following command
$ sudo docker rmi <image id or name>
NOTE: You may have an issue removing an image if you deployed a container. Even if the container is no longer running, you will get this error. You need to remove the container first OR use -f i.e. $ sudo docker rmi -f
To remove a container, issue the following command
$ sudo docker rm <container id or name>
Push a container image to a Repository
So once I had my mongodb container image, I thought I would try pushing it to Docker hub. However, when I tried to push it, I got a message about buffering to disk and then it failed. This was with version 1.4.1. Interestingly enough, I was able to push images with the prior version of 1.3.0 (but this is pretty old). Instead I created my own local registry to test the push capability. I used the local registry setup instructions documented in Step 3 here https://www.ibm.com/developerworks/library/d-docker-on-power-linux-platform/
Once my local registry was setup, I was then able to proceed to pushing my image
First you need to tag your current local image appropriately
$ sudo docker tag c608a51dc0ce localhost:5000/mongodb-ppc64le
Then you can push
$ sudo docker push localhost:5000/mongodb-ppc64le
$ sudo docker images | grep mongodb
Remove all exited containers
$ sudo docker ps -a | grep Exit | cut -d ' ' -f 1 | xargs sudo docker rm
beckett 060000JRNX Marcações:  isv world 7 power7 partner power vlp systems 2 Comentários 7.218 Visualizações
Leveraging IBM's virtual loaner program (VLP) can help you experience the new IBM POWER7, the next generation of Power Systems technology. Starting February 9th, VLP users can reserve POWER7 systems running AIX 6.1 TL4 SP2 or SLES 11. This is a great way to test/port/evaluate/demo your solutions on the all new POWER7 AT NO-CHARGE!
Where else can you get a POWER7 system within 2 hours?? Come try it out and let us know what you think - either by filling out the end of reservation survey, responding to the VLP blog or by contacting our VLP support through e-mail or Live Chat. We'd love to hear from you!
IBM PartnerWorld members can enjoy this easy-to-use, fully automated and dedicated environment at no charge. The VLP provides a wide range of operating systems, including AIX, IBM i, Red Hat and SUSE Linux along with POWER7, POWER6 and POWER5 hardware.
Users on the VLP Web site (www.ibm.com/systems/vlp) can use live chat or e-mail via "We're here to help" for answers to questions or help along the way. Visit the site to sign up and reserve a system.
Jwestern 110000974Y Marcações:  chat blog vlp announcements 3 Comentários 5.758 Visualizações
Please join us here for a VLP Live Q&A Chat session, Thursday May 28 at 2:00PM-3:00PM Central US Time. The VLP Team will be there to answer your questions. The Live Chat will be here on the VLP Blog, look for the Chat box that Thursday. Please mark your calendars and come join in the discussion.[Read More]
The IT landscape is evolving rapidly. Today, IT projects are a key part of business performance. IBM POWER7 can help IT deliver services faster, with higher quality and with superior economics. Learn why "Power is performance redefined."
An historic shift is underway of clients migrating from Sun and HP UNIX® systems to IBM Power Systems™. Over the last four and a half years alone, more than 2,600 businesses have migrated their competitive UNIX systems to Power. With the introduction of POWER7®, that pace has accelerated with over 500 clients migrating in just the 1st half of 2010. In addition, more clients are realizing the benefits of consolidating workloads that have been running on x86 servers onto Power Systems. http://ibm.co/hNgIUN
The Virtual Loaner Program now offers the GA level of AIX 7.1 on POWER7, POWER6 and POWER5 systems. Try out the latest release of AIX at www.ibm.com/systems/vlp
IBM AIX 5.2 Workload Partitions for AIX 7
Workload partitions (WPARs) are virtualized operating system environments within a single instance of the AIX® operating system. WPARs secure and isolate the environment for the processes and signals that are used by enterprise applications.
Applications running in an AIX 5.2 WPAR use AIX 5.2 commands and libraries. If you have applications that have not been certified on newer versions of AIX, the AIX 5.2 commands and libraries provides a way to run them in an AIX 5.2 environment on top of AIX 7.1. Such a setup allows running those applications on currently available hardware that might not support the use of AIX 5.2 as the base operating system. The AIX 5.2 WPARs are also referred to as versioned WPARs. A versioned WPAR is always a system WPAR, and is not shared. Versioned WPARs own writable /opt and /usr file systems.
Quick how to:
To Create a versioned WPAR on the VLP, make an AIX 7 Open Beta Reservation on Power 7.
After the reservation is active, from the My Reservations page, select that reservation.
Under the Reservation(s) Information section, under the Select a reservation action drop down, choose "Add Versioned WPAR".
A new Versioned WPAR will be created on your AIX 7 system. Once completed, go back to the Reservation info page to see the IP address and the root password for the Versioned WPAR.
You can now ssh to the Versioned WPAR from yor VLP lpar or from the SSH Gateway using your normal VLP user ID and password.
ssh <user id>@<wpar IP address>
You can then "su -" to root for full access to the Version Wpar.
From the AIX 7 host, use the "lswpar" and the "lswpar -L" to see more information about your versioned wpar.
For more details on IBM AIX 5.2 Workload Partitions for AIX 7go here:
Jwestern 110000974Y Marcações:  local innovation grow colloborate global video centers onsite ibm business 4.957 Visualizações
Would you like to have one-to-one technical assistance from IBM? The IBM Innovation Centers can help. This video gives an overview of the IBM Innovation Centers and how they can help you grow your business.
IBM Innovation Centers -Collaborate today. Innovate for tomorrow.
jjacobso 1200009P9W Marcações:  docker power linux ppc64le 3 Comentários 4.861 Visualizações
Docker images for ppc64le are making their way onto Docker Hub!! https://hub.docker.com/u/ppc64le/
The repository contains base images that are commonly used to create a number of popular images.
As an example, the official docker repository for Java is built from the buildpack-deps image.
We can use the image ppc64le/buildpacks-dep to create a Java image using the same Dockerfile (with slight modification) that is used for x86_64
Check out our previous blog post on requesting a Virtual Server instance with Docker pre-installed to test out the steps below...
From your pp64le system running docker....
$ sudo apt-get install -y git
$ git clone https://github.com/docker-library/java.git
$ cd java/openjdk-7-jre
Now edit the Dockerfile, substituting 'FROM buildpack-deps:jessie-curl' with 'FROM ppc64le/buildpack-deps:jessie-curl' and initiate the build
$ sudo docker build -t java-ppc64le:openjdk-7-jre .
Once the build is complete we can see the new image in our local repository
$ sudo docker images
Running the image we can see that java 1.7.0_85 was installed
$ sudo docker run -it java-ppc64le:openjdk-7-jre /bin/bash
root@f69dff8037e1:/# java -version
IBM Virtual Loaner Program Was Cloud before the CloudWith all the attention on cloud computing these days—including the recent architectural metaphors for private cloud solutions—you might be surprised to learn that IBM has been a cloud services provider since 2004. Through IBM’s Virtual Loaner Program (VLP), IBM’s PartnerWorld members can get access to IBM i, AIX, and Linux on POWER, running their very own instance with virtually total control.
Read the whole article - http://systeminetwork.com/article/ibm-virtual-loaner-program-was-cloud-cloud?ref=nf
Jwestern 110000974Y Marcações:  lpm mobility aix partition new powervm live application lam 4.719 Visualizações
Use the VLP to validate your applications as Ready for IBM Power Systems Software. Find out more about this validation program then utilize the VLP to test:
Please join us here for another VLP Live! Q&A Chat session, Thursday, July 9 at 10:00am Central US Time. The VLP Team will be here again to answer your questions. Please mark your calendars and come join in the discussion. The VLP team is looking forward to the Live Chat session and hope to have a good turnout from our users!
I'm Bob Welgan, and I'm a developer/designer on VLP. I'm very interested in your questions and feedback about how VLP works. I'll try to post regularly about changes we are making to VLP. One of the things we are working on right now is to better represent the convergence of IBM servers into simply POWER5 and POWER6-based systems. Also, we are excited about our recent deployment of IBM i on POWER6 servers. Stay tuned to this blog for more information about that part of the offering.[Read More]
New video about Dynamic Infrastructure highlighting the VLP and the IBM Innovation Centers. Please let us know your comments and thoughts.
New and enhanced offerings from IBM deliver the right solutions to help you succeed in this increasingly complex and interconnected world. Whether your organization is just beginning your journey towards a dynamic infrastructure, or ready to do more, IBM's new offerings are an ideal step in the right direction towards maximizing your business and IT investments.
Have you every wondered what products are included in the VLP IBM i 7.1 image?
beckett 060000JRNX Marcações:  informationweek ibm powersystems webcast watson 4.245 Visualizações
IBM Watson passed its first test on Jeopardy! in February 2011, but the real test will be in applying the underlying systems, data management and analytics technology in business and across different industries. http://bit.ly/hWjaWw
Moderated by Stephen Baker, author of Final Jeopardy: Man vs Machine and the Quest to Know Everything, and featuring a panel of IBM business and research executives, this webcast will delve into the present and future business implications of the DeepQA technology behind Watson. http://bit.ly/hWjaWw
- Overview of IBM Watson, Jeopardy! The IBM Challenge, and DeepQA technology
- Business implications of Watson in the areas of
Industry transformation, including healthcare
- Data management and analytics
- Workload optimized systems
THE VLP IS MOVING!
The Virtual Loaner Program website and systems will be unavailable from 12:01AM CDT (GMT-06:00) on Friday, July 13, 2007 through 12:01 AM CDT (GMT-06:00) on Tuesday, July 17, 2007 as we move all VLP systems to a new Data Center. Please plan your work accordingly. We apologize in advance for any inconvenience this extended outage may cause, but it is necessary as we continue to grow the VLP. We do not anticipate any major issues during the move -- all VLP systems will simply be shutdown, moved to the new location, and then restarted. Any active reservations that span the move period will be active and available again on Tuesday. If your reservation is scheduled to end during the outage period, it will be removed during the outage. We recommend that you save or backup any critical information on your active VLP reserved systems to a non-VLP repository prior to the move. If you have any concerns or questions, please contact us using the "VLP Support" tab on your reservation page at---> www.ibm.com/systems/vlp
Thank you for your continued interest, usage, and support of the VLP.[Read More]
Dear VLP User,
We want to make you aware of some new features and enhancements to our Linux systems within the IBM Virtual Loaner Program (www.ibm.com/systems/vlp).
Whether you actively develop on Linux or are new to the platform we believe these updates are worth noting. Remember that the VLP is a no charge offering for IBM PartnerWorld Members so come try it out!
SLES11 is now available! You can make SLES11 reservations on both POWER5 and POWER6 servers.
Version updates have been applied to RHEL4, RHEL5 and SLES10
New versions and updates also applied to PowerVM Lx86 images. PowerVM Lx86 supports the installation and running of most 32-bit x86 Linux applications on IBM Power Systems models. If you have never worked are new to Lx86 find out how to get started.
Additional information about VLP Linux systems:
All images use the default package selection as chosen by Redhat or SuSE. Gives the user flexibility to customize the operating system to their needs.
By using this methodology, all Linux images, including the PowerVM i386 environments, are configured to use their built in package management utilities. The FTP hosted package repositories are the actual ISO's used while building the images.
The utilities are:
SLES10... yast2 or rug (rug is a real pain to use, I'd suggest using yast2)
SLES11... yast2 or zypper (zypper is a huge improvement over rug, but yast2 is still easier to use)
RHEL4... up2date (up2date isn't nearly as flexible as yum, but it gets the job done)
Time synchronization with our internal NTP server. (This is very important for development as time skew can disrupt a compiler)All images use the 'noop' disk I/O scheduler. (This increases disk performance and reduces system load by handing the responsibility over to the VIO server)The latest OS supported version of XL C/C++ is always a clean install for every reservation.Apply PTF's which are found in /stage/middleware/Dynamic LPAR and Live Partition Mobility functionality are enabled for RHEL5, SLES10, and SLES11. Reference the VLP LPM User Guide to find out how to get started testing with Live Partition Mobility.
Virtual Loaner Program Administration
Follow us on twitter @ibmvlp
The IBM Industry Application Platform (IAP) pre-configured stack on the Virtual Loaner Program is now available with AIX 7.1 in addition to AIX 6.1 and AIX 5.3 systems. We have also updated the software components and user guide.
The IBM Industry Application Platform is a pre-configured instance of IBM WebSphere Application Server, IBM DB2 and WebSphere MQ that is available for your IBM AIX 7.1, AIX 6.1 and AIX 5.3 operating- system images on the IBM Virtual Loaner Program (VLP). You can use VLP to develop, test and validate applications by using these products. After reserving your VLP partition, which includes choosing the hardware configuration and operating system, install the IBM Industry Application Platform on that partition. This is a great way to reduce middleware setup time for ISVs!
For details on how to use the IAP on VLP, see the user guide - www.ibm.com/partnerworld/wps/static/pdf/IBM_Industry_Application_Platform_VLP_Guide_v1.pdf
The IBM Industry Application Platform contains the following software components:
WebSphere Application Server v22.214.171.124
DB2 Workgroup Server Edition 9.7.3a
WebSphere MQ 126.96.36.199
IBM Rational Agent Controller v8.3
Users can reference the IAP user guide from the VLP How To page - www.ibm.com/partnerworld/wps/pub/systems/vlp/howto
PartnerWorld provides how to setup for an evaluation of POWER7 technologies for RHEL 5.5 installed on your VLP system. By upgrading the Linux kernel, and adding a handful of updated tools, the operating system can easily exploit the POWER7 system.
For details go here: