vjagadeesh 2700063KJN Visits (1810)
vjagadeesh 2700063KJN Visits (1759)
In Rational Performance Tester (RPT) 8.6, new feature has been implemented with respect to datapool substitution in the Page Title. As and when the page title is executed during the run the datapool candidate is replaced with the iteration number.
Soumya Y Shanthimohan 270004GAQS Visits (1881)
A scenario where a web application was recorded using Rational Performance Tester (RPT).
After playback, data correlation errors were noticed in spite of manually creating the references. Upon analyzing the server responses, it was noted that some of the responses were sent in binary format.
Data correlation cannot be done on the response content if the data is in binary. The response should be in readable format to implement data correlation.
The below steps were followed and the script was re-recorded:
Open RPT Workbench -> Select 'Window' -> 'Preferences' -> Select 'Test' -> 'Test Generation' -> Select all the check boxes and record again.
The server responses after the above settings looked fine, however, the correlation errors still remained. Upon further investigation, it was noticed that the users ran into trouble at the "Home - Portal" page.
Instead of getting redirected to http
It was also noticed that the initial URL was rather odd, it had a jsessionid incorporated in it:
Usually the initial URL is rather generic, something like
The concern here is, Incorporating the jessesion (8AF54....) value in the URL for all the virtual users, the playback sessions for the multi-user playback are not fully differentiated by the server.
The issue was resolved by using a different URL without specific information like above.
Saurabh.Tyagi 270005CY2K Visits (2011)
IBM Rational Synergy is a task-based, software configuration management (SCM) solution that brings together global, distributed development teams on a unified platform. Rational Synergy provides capabilities that help software and systems development teams work and collaborate faster and easier.
Rational Synergy is licensed using IBM Rational Common Licensing. For information about Rational Common Licensing, see the Rational Common Licensing information center.
Rational Synergy supports the Floating, Named-User Floating, and Token license types. For a description of license types, see “License type definitions” in the Rational Common Licensing information center.
For Rational Synergy users, the login name is seen as the user of the token license. To reserve Named-User licenses for specific users, see “Setting up the options file” in the Rational Common Licensing information center. When configuring the options file for Rational Synergy and Rational Change, it is not necessary to put the default administrative users (ccm_root, ChangeAdmin, and csuser) in the INCLUDE list. The license file includes additional floating licenses for these users. Do not assign these licenses to other users because the products might fail.
How licensing works with Rational Synergy:
When you start Rational Synergy, it contacts the License Manager to request a license. Rational Synergy uses information that was provided during the server installation process to find the License Manager. The following example describes how licenses are configured during installation. The example assumes IBM Rational Common Licensing was installed before installing Rational Synergy.
-> When you install the Rational Synergy server, you are prompted for the host name and port number of the license manager. The information is recorded in the $CCM
-> When the Rational Synergy router process is started, it reads the license information from the $CCM
-> When a Rational Synergy session is started, the information about where to find the license manager is passed from the router to the Rational Synergy server. The Rational Synergy server also looks in the TELE
The Rational Synergy server contacts the license manager using the specified host and port, and requests a license on behalf of the user. The $CCM
Rational Synergy searches for license servers and license files in the following order:
If you move the license manager to a different system, you must edit the $CCM
Operations that consume Synergy license:
Starting a session does not consume a license. Only operations that update the underlying database consume a license, such as file check out, task creation, task completion, and so on.
Synergy license timeout
After a license is consumed by a user, that license is reserved for that user for 60 minutes after the last database update while the session is running. If the user exits the session, the license is released immediately.
License usage during integration:
Some Rational Synergy integrations hold a license for the duration of time the user is running the integration. Source-code related operations performed through the integration can then be updated in the database. In this case, the user can exit the visible session, but the integration is still running a session behind the scenes on behalf of the user
Rational Change supports the floating, named-user floating, and token license types.When you install Rational Change, the license server information (port@host) is requested and persisted to the file CHAN
There is a 30 minute minimum use time when Rational Change checks out a license. When a license is checked out, it stays checked out for at least 30 minutes, whether there is activity from the user. If the user exits or is inactive after that, the license is released.
Co-Authored by: Saurabh Tyagi and Pankaj Sharma
GRUC Webcast on August 28: Rock and Roll will Never Die, but the Spreadsheets for Requirement Management Will
JackSchneiderCO 270007HB0G Visits (1356)
Date & Time: August 28, 2014, 12:00 PM to 1:00 PM (Eastern Daylight Time)
Please note the time of the event in your time zone: 9am PDT, 10am MDT, 11am CDT, and noon EDT
LIVE TWEETING DURING THE WEBCAST! USE #GRUCDOORS TO FOLLOW AND SUBMIT QUESTIONS AND COMMENTS TO OUR SPEAKERS
Your 15 minutes of fame has arrived! If you've ever fantasized about putting down the requirements spreadsheet and becoming Gene Simmons for a day, or wanted to ditch the office and live on a tour bus for weeks on end like Bon Jovi, this webinar is for you! In this webinar, you'll learn the four reasons why you can't afford to waste more time on force-fitting your current spreadsheets and tools to the task of managing requirements for your projects. John McDonald, CEO of CloudOne, will walk through the new, cloud-based, SaaS way do to requirements with the new IBM DOORS Next Generation.
By attending this webinar,
Everyone who attends the webinar will receive a thank-you gift as well as an opportunity to try the technology in your own secure, virtual private cloud.
About the Presenter:
John McDonald, CEO of CloudOne
***Dial in codes will be sent a few minutes before the webcast and posted in the online meeting. Please check your email before 12:00 p.m. EDT (sender is info
Soumya Y Shanthimohan 270004GAQS Visits (2250)
With the rise of Ajax powered sites, it is becoming very important for the websites to load the data quickly, asynchronously and without any delay.
For AJAX applications, JSON is faster and easier than XML.
Difference between JSON and XML
Does RPT support JSON inputs?
Yes. JSON inputs are supported since the version RPT 8.2.1.
How to pass JSON inputs into RPT?
JSON inputs can be passed into RPT using the below two methods -
I. Proxy recording
The procedure is the same as recording a http test.
The use case would be:
1. [RPT Recording Wizard] Start a 'New test from Recording'
2. [RPT Recording Wizard] Select the option 'http test'
3. [RPT Recording Wizard] Record an "unmanaged application"
4. [RPT Recording Wizard] Selection of an available port on the machine, and then start of the recording.
5. [SoapUI client ] Launch SOAP UI > File > Preferences > Proxy settings
6. [SoapUI client ] Populate the 'Host' flied with the value 127.0.0.1. The Port number should be the one that you selected during recording (as in Step 4)
7. [SoapUI client] Manual tests until the end of a given scenario.
8. [Rpt Recording Wizard] Stop the recording.
Once the recording is stopped, a SOA extension test should be created in RPT with all the JSON information.
II. Manual test suite creation
1. Launch RPT
2. File > New Web service Test > Empty Test
3. Once an Empty test is created, you can add 'Text requests'
4. The URL should have the JSON information.
5. Add a 'http header'
Name - 'Content-Type'
Value - 'application/json'
6. Lastly, paste the JSON Content to be sent in the test suite -
Some JSON Samples
GRUC Webcast on August 21: What's in your (e) Wallet? Transforming payments and transactional capabilities.
JackSchneiderCO 270007HB0G Visits (1491)
Date & Time: August 21, 2014, 011:00 AM to 12:00 PM (Eastern Daylight Time)
LIVE TWEETING DURING THE WEBCAST! USE #GRUCPAYMENTS TO FOLLOW AND SUBMIT QUESTIONS AND COMMENTS TO OUR SPEAKERS.
Payments and transactional services present multiple ‘moments of truth’ for demanding clients who are often interacting with us anytime and anywhere. For financial services organizations, the 24/7 nature of the industry and its intense competition have made innovation and optimization of these capabilities critical. In this session, you will learn about the experiences of IBM clients in transforming their payments and transactional services with IBM Rational DevOps capabilities.
Learn how banks, brokerages and insurance firms are aligning the life cycles of legacy back offices with the agile sprints of the mobile payments development shops and value-added technology partners.
Bruce Baron, Financial Services Sector Offerings Leader, IBM
Peter Eeles, Financial Services Sector Industry Lead, IBM Rational Worldwide Tiger Team, IBM
***Dial in codes will be sent a few minutes before the webcast and posted in the online meeting. Please check your email before 12:00 EDT (sender is info
AcdntlPoet 2700019V2G Visits (2045)
Troubleshoot the error "No successful contact, Check Agents Failed" in RPT 8.5- This video shows you you can troubleshoot this error message in IBM Rational Performance Tester V8.5: "Agent ... not ready, time of last contact: No successful contact. Check Agents Failed"
RohitBalduwa 2700066W8H Visits (2154)
Web UI Theming feature gives a Jazz Team Server administrator the ability to modify the look and feel of the Web UI for all users of that Jazz Team Server.
A theme can contain any number of *.css files. The *.css files in the theme can create new CSS rules, or they can override existing rules. If a CSS rule defined in an active theme exactly matches a CSS rule defined by the Jazz Team Server, the CSS rule defined by the theme will take precedence.
Tip: If you would like to alter the appearance of a certain UI element, use a tool like Firebug to inspect the DOM node and see what CSS rules are affecting its appearance. You can then create a theme that overrides those rules in order to alter the element's appearance.
I am listing examples where a logo can be modified either using a 'publicly accessible' image or an image file on a local machine.
Using a 'publicly accessible ' image. You can replace the hyperlink with your custom logo and modify the dimensions in css as per your requirement.
Similarly, upload the step 3 zip file for ccm and qm applications.
Using an image file(smiley.gif) from a local machine.
Soumya Y Shanthimohan 270004GAQS Visits (3102)
Attempts to log-in to the Secured web application while recording in IBM Rational Performance Tester (RPT) may led to the message - 'This Connection is Untrusted'.
The message is seen because, RPT acts as a proxy between the browser and the server application to record the data exchange. When a Secured page is recorded using RPT, the RPT proxy certificate is presented to the browser leading to the above message.
Creating and installing a digital certificate will help you get rid of the above message during RPT recording.
The digital certificates feature enables you to run tests against servers that use Secure Sockets Layer (SSL) for applications that require client-side digital certificates to authenticate users.
A digital certificate is a file that binds a public cryptographic key with an identity (a user or an organization). Trusted certificate authorities issue digital certificates, which are then used to authenticate users and organizations for access to websites, email servers, and other secure systems. A certificate store is an archive file that contains almost any number of digital certificates, possibly certificates that are issued from different certificate authorities.
Creating a Digital certificate store
A digital certificate store can be created using the 'keytool' utility.
You will find the keytool utility file in the RPT_
Navigate to the below directory through the command prompt -
Type the following command and press enter
my_certificate is an alias for your certificate in the key store. You may never use it, but every new certificate in your key store must have its own alias.
The certificate generation process will prompt you to enter some information about you. This information will be saved in the certificate. At the end you will have to confirm the entered information.
Once the information is confirmed, you will be prompted to enter the password. Enter the password given in the above command -
At the end you will find the new key store file my_keystore.pfx in your current directory.
Importing a Digital certificate into RPT
Import the certificate into the RPT project before recording.
Click on 'File' > 'Import' > 'General' > 'File system'. Import the required certificates into the project in RPT.
Imported certificates can now be used during RPT recording and playback -
Once you have the certificates in place, you may start recording a test with digital certificates. The below IBM info center link has details on recording a test with digital certificates:
IBM info center link with details on Playing back a test with Digital certificates: