Dustin and i manned the IBM booth at InterOp in Las Vegas last week. The conference was very different from the industry conferences I remember, but then again I haven't been to one in a long time. I don't recall seeing boxing matches, light shows or bikini models but I think they are a welcome addition.
Ostensibly this conference was focused on cloud computing and was even called the "Cloud Summit". However, in the vendor area, there were few real cloud computing specific peds. Most of the vendor displays were about hardware, system monitoring and security.
Ric Telford of IBM gave a keynote address and sspoke of IBM's cloud offerings. After the keynote, there was a flurry of visitors asking about IBM, Cloud Computing and IBM's cloud offerings. Most of the visitors were looking for education and we were happy to have the opportunity to talk about the company and cloud computing from IBM's perspective.
We had the CloudBurst Appliance with us and it drew some interest. The purple case definitely stood out and drew inquiries. Some excitement is being generated but I think now the industry and the market has to catch up to us.
I’m going to take a different approach this week in the blog. Instead of me telling you about some of the features or uses of WebSphere CloudBurst, I thought I would catch up with someone using the product everyday, WebSphere Test Architect Robbie Minshall. Robbie is responsible for a team of testers that harness a lab of over 2,000 physical machines to put our WebSphere Application Server product through some pretty rigorous testing. Toward the beginning of this year Robbie’s team started to leverage the WebSphere CloudBurst Appliance in order to create the WebSphere Application Server environments needed for their testing.
Robbie, can you tell us a little bit about what the WebSphere Application Server test efforts entail?
In WebSphere Application Server development and test we have two primary scenarios. The first is making sure that developers have rapid access to code, test cases and server topologies so that they can write code, test cases and then execute test scenarios on meaningful topologies. The second scenario is an automated daily regression where in response to a build, we provision a massive amount of WebSphere Application Server topologies and execute our automated regression tests.
Previously we have supported these scenarios through the deployment of the Tivoli Provisioning Manager for operating system provisioning, some applications for checking out environments, and then a lot of automation scripts for the silent install and configuration of WebSphere Application Server cells.
Given those scenarios and the existing solution, what are your motivations for setting up a private cloud using WebSphere CloudBurst Appliance?
We are supporting these scenarios through a pretty complicated combination of technologies. These include silent WAS install scripts, wsadmin configuration scripts, a custom hardware leasing application and the utilization of Tivoli Provisioning Manager for OS Provisioning. This solution is working very well for us though as always we are looking for areas to improve, opportunities to simplify and to reduce our dependency on investment in our custom automation scripts. Mainly, there were 3 areas where we wanted to improve our framework: Availability, Utilization and Management. This is why we started looking to the WebSphere CloudBurst Appliance.
Can you expand a bit on what you are looking for in those three areas?
The first focus area we have is availability of environments. We really wanted to lower the entry requirement for the skills and education necessary to get a development or test environment. Setting up these environments has just been too hard, too time consuming, and too error prone. Using WebSphere CloudBurst we can provide an easy push button solution for developers to get on-demand access to the topologies they need.
The second area we are looking for significant improvements on is hardware utilization. Our budgets are tight and in our native automation pools we are only using between 6-12% of the available physical resources. In order to improve this we were looking at leveraging virtualization. WebSphere CloudBurst offers the classic benefit of virtualization with the nice additions of optimized WebSphere Application Server placement and really good topology and pattern management. In our initial experiments we were able to push the hardware utilization up to 90% of physical capacity and consistently were leveraging around 70% of our physical capacity.
Finally we are looking to improve and simplify our management of physical resources and automation. We work in a lot of small agile teams and organizational priorities change from iteration to iteration. Not only does WebSphere CloudBurst allow us to maintain a catalog of topologies or patterns for releases but it also allows us to adjust physical resource allocation to teams through the use of sub clouds or cloud groups.
Basically we felt that WebSphere CloudBurst would improve the availability of application environments, enhance automation, and improve hardware utilization all with very low physical and administrative costs.
What were some of the challenges involved with getting a cloud up and running in your test department?
One of our challenges seems like it would be common to many scenarios, especially in today’s world. Our budget for new hardware to build out our cloud infrastructure was initially very limited. Most cloud infrastructure designs depict very ideal hardware scenarios including SANs, large multicore machines, and private and public networks within a dedicated lab. Quite frankly we did not have the budget to create this from scratch. It was important for us to demonstrate value and data to warrant future investment in dedicated infrastructure. After some performance comparisons we were very happily surprised to see that we could leverage our existing mixed hardware within a distributed cloud. The performance of application environments dispensed by WebSphere CloudBurst on many small existing boxes in comparison to large multicore machines with a SAN was very comparable. This allows us to leverage existing hardware, with minimal investment all the while demonstrating the value and efficiencies of cloud computing. That data in turn has allowed us to obtain new dedicated hardware to iteratively build up a larger lab specifically for use with WebSphere CloudBurst.
Specifically with WebSphere CloudBurst, are there any tips/hints you would offer users getting started with the appliance?
Sure. First, we quickly realized as we added hypervisors to our WebSphere CloudBurst setup it was critical to have someone with network knowledge on hand. This is because the hypervisors came from various sections of our lab, and we really needed people with knowledge of how the network operated in those different sections. Once we had the right people we were able to setup WebSphere CloudBurst and deploy patterns within an hour and a half.
Moving forward we continued to have challenges as we dynamically moved systems between our native hardware pool and our cloud. Occasionally the WebSphere CloudBurst administrator would move a system into the cloud but incorrectly configure the network or storage information. This lead to some misconfigured hypervisors polluting our cloud. We overcame this, quite simply and satisfactorily I may add, by creating some simple WebSphere CloudBurst CLI scripts which add the hypervisors, test them individually, by carrying out a small deployment to that hypervisor, and then move the correctly configured hypervisors into the cloud after verifying success. Misconfigured hypervisors go into a pool for problem determination. This has allowed us to maintain a clean cloud, and we are able to dynamically move our hardware in and out of the cloud to meet our business objectives.
We also use the WebSphere CloudBurst CLI to prime the cloud so to speak. Before using a given hypervisor in our cloud, we execute scripts that ensure each unique virtual image in our catalog has been deployed to each of our hypervisors at least once. When the image is first deployed to a hypervisor, a cache is created on the hypervisor side of the connection, thus meaning subsequent deployments do not require the entire image to be transferred over the wire. This gives us consistent and fast deployment times once we are using a hypervisor in our cloud.
I would assume that like many applications deployed on WebSphere Application Server, your team’s applications have several external dependencies. Some of these dependencies won’t necessarily be in the cloud, so how did you handle this?
You’re right about the external dependencies. Our applications and test cases run on the WebSphere Application Server but are dependent upon many external resources such as databases, LDAP servers, external web services etc. WebSphere CloudBurst allows us to deploy WAS topologies in a very dynamic and configurable way but the 1.0.1 version does not allow us to deploy these external resources in the same manner. This was overcome by using script packages in our patterns. These script packages allow us to associate our test applications with various patterns we have defined. The script package definition also allows us to pass in parameters to the execution of our scripts. We supply these parameter values during deploy time, and these values are used to convey the name or location of various external resources. The scripts that install our applications can access these values and ensure the application is properly integrated with the set of resources not managed by the appliance.
What is your team looking to do next with WebSphere CloudBurst and their private cloud?
The next challenge on our plate is to keep up with the demand of our expanding cloud and to develop a more dynamic relationship between our native pools and our cloud using the Tivoli Provisioning Manager. These are fun challenges to have and we look forward to sharing our progress.
I'm glad I got to spend some time with Robbie to glean some insight into their work and progress with WebSphere CloudBurst. I hope this information was useful to you. It's always nice to hear about a product from practitioners who can give you hints, tips, gotchas, and other useful information. Be sure to let me know if you have any questions about what Robbie and his team are doing with WebSphere CloudBurst.
If you work in a development shop similar to mine, you and many of your coworkers have more than one workstation under your desk.We use those extra machines for a variety of reasons but by and large they they tend to serve most often as foot warmers. That is not to say that they are unnecessary but rather they simply aren't used most of the time. If you try to eliminate one, you will surely need it within the next week but if your manager asks if it is really necessary you would be hard pressed to pinpoint precisely when the last time it was used for something really important. To developers, these extra machines are potential sandboxes for isolated experiments or testing scenarios. For managers, they are relatively unused capital investments that require inventory control and have depreciating value. If you are a network administrator there are certainly computers in your inventory that are older and lack the capacity to be counted on for everyday use. They sit in a corner or in a blade rack and are probably idle or even powered off. These assets take up physical space and contribute very little to your data center. However, they have little sale value but may represent a significant investment. Or maybe you just can't part with them for sentimental reasons.
Whatever the reasons for having computing resources lying around that are seldom used, here is an idea: Virtualization. With virtualized images you can use those machines for whatever purposes are required and for as long as they are required without having to spend hours loading them with a compliant OS image, installing software and configuring them for use. Virtual image libraries could hold preinstalled systems for almost any need. It could be for anything:
Workstations provisioned for temporary workers
More server capacity
More machines or load testing
Extra processors for parallel processing systems
Back up systems to carry loads during maintenance hours
If you use WebSphere in any capacity, CloudBurst can be used to lay in place a completely functioning WebSphere install in as little as 20 minutes, OS and all.
When the need for the machine is passed, it can be un-deployed and returned to the pool. This could significantly increase the available computing power of an entire development business. The ability to turn any machine into a needed and useful system on demand is real agile computing and gives a whole new dimension to governance.
If you are reading this blog then I am pretty sure that you are interested in the agility that can be achieved by rapidly provisioning middleware systems and standing up virtual applications in a private cloud environment. However there are other aspects of agility that you should also consider. One such aspect is the ability to build applications that can be easily maintained, updated, and extended. This is where OSGi technology comes into the picture.
If you have been working with the IBM Workload Deployer (or watching some IBM Workload Deployer demos) you may have noticed a category of components in the virtual application builder called OSGi Components.
Maybe you already know all about OSGi applications and the value they bring to an enterprise. Or, perhaps you noticed this and decided that you would search for some more information on this odd acronym and just what an OSGi application is all about.
In a nutshell OSGi technology is a way to define dynamic modules for Java. It provides a standard way to encapsulate components (called bundles) with metadata that define versioned package dependencies, service dependencies, packages exported, services exported, etc... basically everything you need to know about this bundle so that it can be connected up with other bundles to support a particular solution. These bundles can then be grouped together into applications and dynamically wired to fulfill necessary dependencies at runtime. The OSGi framework provides all of the necessary capability to manage the dependencies and resolve any problems.
Those who leverage OSGi technology benefit from improved time-to-market and reduced development costs. The loose coupling provided by the OSGi framework reduces maintenance costs and facilitates the dynamic delivery of components in a running system. Of course there's a lot more to it than just that ... involving portability across different environments, achieving the appropriate level of isolation or sharing within an environment, and integrating with the many different technologies and patterns already available today. I don't think I know enough about OSGi to do it justice here. But fortunately for me (and you) there are several experts who can make it all clear.
One such expert is Graham Charters and there is a great opportunity to hear him introduce this topic and also participate in a dialogue about the concepts and what they mean for your business. Graham will be leading a Global WebSphere Community Lab Chat on Wednesday of this week (July 20th) entitled: How can OSGi make your enterprise more agile. Graham is the IBM technical lead in the OSGi Alliance Enterprise Expert Group and an active participant in the open source community implementing many of these standards. So register now for this free session and learn how OSGi can make your enterprise even more agile.
Starting in WebSphere CloudBurst 2.0, there are different levels of elasticity that you can achieve in your WebSphere deployments. As I mentioned in a previous post, the Intelligent Management Pack allows you to define dynamic clusters. This means cluster membership and the number of instances of a given application adjusts on the fly to meet SLAs for your application. This enables a more dynamic environment as opposed to static cluster definitions, but there is a layer of elasticity below this that bears exploring.
Dynamic clusters work with WebSphere nodes that already exists. Users define the nodes available for use by a dynamic cluster, and the runtime uses SLAs and current system state to determine the actual nodes used and application instances started. So, what if you need more nodes than what you currently have in a given WebSphere environment? A dynamic cluster will not create a new node, so you have to define extra nodes. Starting in WebSphere CloudBurst 2.0, this is as easy as pushing a button.
Dynamic virtual machine operations allow you to add and remove nodes on the fly for a given virtual system. For instance, take the pattern in the picture below:
If you were to deploy this pattern, you would end up with a WebSphere Application Server cell with a node makeup similar to the below:
Now that the environment is out there (in mere minutes I should mention), suppose you want to add more nodes? Before WebSphere CloudBurst 2.0, you could have done it, but it would involve creating another pattern with a custom node part and deploying it. This results in two different virtual systems and complicates the maintenance stream. Now, in WebSphere CloudBurst 2.0, you can simply click a button to add a node to the existing virtual system.
From the virtual systems view, if you expand the virtual machines, by each virtual machine you will see an Actions column with a View link. If you want to add a node to the environment shown above, you simply click the View link, and then click the clone icon highlighted in green below:
WebSphere CloudBurst prompts you for the number of nodes to add. You make the selection and then click OK. The appliance creates the new node and federates it into the cell for you. For instance, if you chose to add a single node, at the end of the clone not only would you have another virtual machine in your virtual system, but also another node automatically federated into your WebSphere Application Server cell:
On the flip side, you can remove a node by clicking the delete icon in the same dialog as the clone icon above. This removes the node from the WebSphere Application Server cell and deletes the virtual machine.
The ability to easily add and remove virtual machines from your WebSphere CloudBurst virtual systems enables a very valuable level of elasticity. Now you can very easily add and remove nodes on the fly based on the current demands of your system. As always, let me know if you have any questions or comments.
Lately, I have run into multiple situations where an IBM Workload Deployer user has been trying to decide exactly how they want to create their customized images for the cloud. Essentially, they have been trying to decide whether to use the native extend and capture capabilities of IBM Workload Deployer, or to pursue the use of the Image Construction and Composition Tool (also included with the appliance). The conversations have been interesting and challenging, but more importantly, they have been a reminder that constructing enterprise-ready environments for the cloud does not happen by magic. It takes thought, deliberate planning, sustainable design, and the tools to carry everything out.
The tools part we have covered. I have every confidence, bolstered by user experience after user experience, that IBM Workload Deployer and associated tools (like the Image Construction and Composition Tool) equip you to build highly customized, cloud-based application environments. In this post, I want to focus in on the thought process that goes into how you decide to build your customized environment. Specifically, I would like to talk about important points to consider as you try to understand whether to use the native extend and capture capabilities of IBM Workload Deployer or the Image Construction and Composition Tool.
To be clear from the outset, I am not trying to provide a decision flowchart in this post. For all intents and purposes, that would be next to impossible. Instead, I want to pose to you some important questions that you should ask of yourself, along with the reasons why I believe those queries to be important. Keeping in mind that this is not an all-inclusive list, here it goes:
Question: Are the customizations that you want to make congruent with an IBM-supplied image?
Reason: One of the first decisions you should make is whether or not you can start with an IBM-supplied image as the base for your customization. You need to know what middleware elements (type and version) make up your environment and what operating system should host that environment (version and distribution). You can match that information against the list of content that IBM supplies. If there is a match, you should start by looking at extend and capture to customize that image to meet your needs. If there is no direct match, you may be looking at the Image Construction and Composition Tool.
Question: Does your custom content supplement middleware content supplied in an IBM image?
Reason: If you simply need to add additional components that supplement software already in an IBM image, I believe it is best to first examine the use of extend and capture. Whether these components are IBM software or not is irrelevant as the extend and capture functionality does not care.
Question: How configurable do you want to make the custom content in your image?
Reason: If you are adding content into the image, you need to think about just how configurable you need it to be. When you use extend and capture, you add the content to an existing image in a manner that pretty well ends up being opaque to IBM Workload Deployer. To configure that content, you need to have script packages and make sure they are part of every pattern you create based on the image. Alternatively, if you use the Image Construction and Composition Tool, you can embed configuration behavior in the image's activation engine, and you can expose deploy-time parameters without needing to include script packages in every single pattern. As an example, if you need to add a monitoring agent into your environment, you would likely do this via extend and capture and end up with a pretty simple script package to configure that agent during deployment. If however, you need to create an image with a custom database, you would likely favor the Image Construction and Composition Tool as you could embed common deploy-time configuration parameters directly in the image. For a database, there are likely to be many more deploy-time configuration parameters that you want to expose as compared to a more simple monitoring agent.
Question: Is your main focus on making operating system changes?
Reason:If your primary focus is on making operating system changes AND the answer to the first question is that your target content aligns well with IBM-supplied images, then extend and capture is where you want to start. Of course, you need to make sure that you can make all necessary changes to the OS with extend and capture, but I will say that this capability is not very restrictive at all.
Admittedly, this is a short list, but I believe it is a good starting point for how you decide upon one approach versus the other. Also, I would be remiss not to point out that these tools are absolutely not mutually exclusive. Many users I work with use a combination of the two approaches. In fact, there are some use cases that call for both tools. Start by creating a completely custom image in the Image Construction and Composition Tool, and then subject that image to the extend and capture process in IBM Workload Deployer to customize it for a particular purpose, team, project, etc. I hope you find this helpful, and I welcome your feedback or thoughts!
More and more, I am getting a question about how to bring existing WebSphere environments into IBM Workload Deployer. While "bringing in an environment" can mean any number of things, let's take it to mean that a user wants to import their existing WebSphere cells, applications, and configuration into IBM Workload Deployer as a pattern they can subsequently deploy. While there may not be a big red easy button in the appliance that lets you point to an existing environment and import it, there are a couple of techniques that one can employ. I have covered both techniques before, but since I'm getting the question with increasing frequency, I felt like it was time for recap.
The first option is to use a combination of IBM Workload Deployer and Rational Automation Framework for WebSphere. This is a use case I have spoken about numerous times at conferences and in blog posts and articles. In fact, you can read a little about it here. In this sense, RAFW provides excellent capabilities to point at an existing cell, and import everything about it. This includes WebSphere configuration, applications, shared libraries, and more. Once imported as a RAFW project, you can use the IBM Workload Deployer integration script package provided by RAFW to replay that configuration on top of deployments created by the appliance.
The second option is something I talk about a little less frequently. This option revolves around the use of a sample script (provided for free in our samples gallery) that you can run against existing WebSphere cells. The invocation of this script produces IBM Workload Deployer script packages that you can use in patterns to apply the configuration of the target cell to your new cloud-based deployments. Under the covers the utility script and resultant script packages use backupConfig and restoreConfig respectively. They do ensure the update of the cell, node, and host names during the restoreConfig execution (which happens automatically during pattern deployment). Beyond that, the use of the script is subject to the same limitations and rules in place for the use of the backupConfig and restoreConfig commands. You can read more about this capability, watch it in action, and download it for free.
I hope this is all useful information for those of you looking for ways to import existing environments into IBM Workload Deployer as patterns. If you have any questions, please let me know!
When we talk about WebSphere CloudBurst, its applicability to development and test environments usually jumps out at the audience. Using the appliance, you can provision fully configured WebSphere cells (your applications included) as a set of virtual machines in a matter of minutes. Further, a patterns-based approach means you can be sure that you are going to get consistent results every time.
The ability to very quickly and consistently stamp out customized WebSphere environments is a huge benefit for test and development purposes because these are typically dynamic. Users frequently stand up and tear down these environments to support the application development process.
This is fine, but sometimes these benefits and particular use case for the appliance lead customers to wonder how it is applicable to production environments. After all, you do not frequently setup and tear down production environments. It is much more common that you deploy your production environment and leave it be so long as you are getting the desired behavior. So, how does WebSphere CloudBurst help with your production environments?
To answer this, we have to avoid looking at the appliance's applicability to production environments in a vacuum. What do I mean? Well, as you are well aware, an application environment goes through many stages in order to get to production. For example, in your organization a given application environment may go through development, test, staging, and pre-production before you finally promote it to production.
One of the challenges as you move your application environment from one stage to the next is maintaining configuration consistency. In other words, you somehow have to ensure that the environment you tested and verified is the same one that you eventually deploy into production. This is where WebSphere CloudBurst patterns can prove invaluable.
You can build WebSphere CloudBurst patterns that represent your various application environments (from the topology to the configuration), and effectively parameterize those patterns so that they can be used across each stage of your application lifecycle. For instance, as you move an application environment from development to test, the location of backend data sources may change. Simply make this location a parameter configurable during pattern deployment, and you can reuse the pattern for both development and test. If you extend this parameterization methodology to include the variable bits of configuration for each stage in the application's lifecycle, you can reuse the pattern from development all the way to production. The result is that you can be certain the environment you test and verify is the exact same one that you put in production.
For me, the beauty of WebSphere CloudBurst is really the patterns-based approach. This approach not only makes configuring and deploying WebSphere environments faster and simpler than ever, but it also makes the standing up of such environments easily repeatable. This can mean tremendous benefits for the deployment of your applications throughout their lifecycle.
One of the most powerful features of WebSphere CloudBurst is the ability to take one of the WebSphere Application Server Hypervisor Edition virtual images that are shipped with the appliance and extend it to a produce a custom virtual image. This allows users to begin creating customized environments from the bottom up, starting with the operating system. To put it in better context, let's take a look at a couple of scenarios where this feature comes in quite handy.
First off, a very common need for our customers is the ability to continually monitor their application environments. For instance, you may install Tivoli monitoring agents on all of your machines hosting WebSphere Application Server processes and configure those agents to report back to a management server. This is a great case for image extension in WebSphere CloudBurst.
In this scenario, you would start by extending an existing WebSphere Application Server Hypervisor Edition image. WebSphere CloudBurst creates a running virtual machine based off of the selected image, and you log into that virtual machine and install the Tivoli monitoring agents. Once the installation is done, you capture the virtual image back into the WebSphere CloudBurst catalog and use the new image to build a custom pattern. The last step is to include a script package on this custom pattern that, upon deployment, will configure the installed monitoring agents to report back to your desired management server.
Another use case is likely to be of interest to you if you are using WebSphere Virtual Enterprise (or something similar), and you could benefit from the same ease of provisioning for those environments that WebSphere CloudBurst brings to WebSphere Application Server environments. You can use the same customization combination above (image extension and custom scripts) to enable WebSphere CloudBurst to essentially dispense WebSphere Virtual Enterprise cells.
Again, this scenario starts off by extending a WebSphere Application Server Hypervisor Edition virtual image. Once the virtual machine for the extension is created by WebSphere CloudBurst, you log in and install the WebSphere Virtual Enterprise product. After the installation is done, you capture the image and store it in the catalog. Next, you build a custom pattern based off of this image and include script packages that, upon deployment, augment the various parts in the pattern from WebSphere Application Server profiles to WebSphere Virtual Enterprise profiles. (You may wonder why you wouldn't just create the WebSphere Virtual Enterprise profiles during the image extension process. This is because during image extension, you cannot make changes to the virtual disk that contains the WebSphere Application Server profiles. Any changes made to the profiles will be wiped out during the capture process.)
There are countless more scenarios for creating custom virtual images in WebSphere CloudBurst. To name a few, you may want to install JDBC drivers that are common to almost all of your application environments, install required anti-virus software, or just make operating system configuration changes. All of these things can be accomplished through the image extension and capture process. Look for an article coming out soon that will discuss and explain, in much greater detail than I provided here, the process of installing and configuring Tivoli monitoring agents in environments dispensed by WebSphere CloudBurst. In the meantime, if you have any questions or comments, drop us a line here or check out our forum.
As I have mentioned before, IBM Workload Deployer v3.0 introduces choices in pattern-based deployment models. One of those models, virtual system patterns, is a carry over from the WebSphere CloudBurst Appliance. When you use virtual system patterns in IBM Workload Deployer, you can take advantage of all of the techniques you put to use in WebSphere CloudBurst. This is certainly good news for current WebSphere CloudBurst users, but it goes a bit further. Instead of simply maintaining the status quo with virtual system patterns, which would have been reasonable considering the introduction of virtual application patterns, we chose to continue to expand on your customization options for this pattern deployment model. In particular, I want to discuss three new features in IBM Workload Deployer that may help you to better construct and manage virtual system patterns.
The first new feature is one that I have been eagerly awaiting. In the new version of the appliance, we provide you with the ability to specify part and script package ordering in your pattern. This means that, within the virtual system pattern editor, you can tell IBM Workload Deployer in which order to start the virtual machines in your pattern, and you can specify in which order to invoke the script packages within the pattern during deployment. This eliminates the need for special script invocation orchestration logic in your pattern (I had customers resorting to a semaphore like approach using a shared file system), and it allows you to be more declarative about the virtual machine bring-up process. There are constraints, specifically with the part ordering. Some images will impose an implied part start-up order that you cannot change. For instance, deployment manager parts in the WebSphere Application Server Hypervisor Edition image must start before custom node parts. The good news is the pattern editor will not allow you to specify a part start-up order that violates these constraints. The image below shows an example of the ordering view in the virtual system pattern editor.
Another new feature that may influence the way you build virtual system patterns is the introduction of Add-Ons. You can think of Add-Ons as special script packages that you can include in your virtual system pattern that perform system-level configuration actions. Specifically, you can include add-ons in your virtual system pattern to add an operating system user, add a virtual disk, or add a NIC during the deployment process. You include Add-Ons in your pattern by simply dragging and dropping them onto a part in your pattern, just as you do with script packages today. The difference between script packages and Add-Ons is that IBM Workload Deployer will ensure the invocation of all Add-Ons before any other scripts run during deployment. We include default Add-On implementations for adding a user, disk, and NIC.
The last new feature I want to talk about today has more to do with how you manage or govern the deployment of virtual system patterns. In WebSphere CloudBurst 2.0, we introduced the idea of Environment Profiles as a way to extend your customization reach into the deployment process. Initially, these profiles gave you the ability to directly assign IP addresses to virtual machines in your deployment, declaratively specify virtual machine naming formats, and easily split a single pattern deployment across multiple cloud groups. In IBM Workload Deployer, you will be able to use these same profiles to set resource consumption limits for pattern deployments. In particular, you will be able to set cumulative limits for virtual CPU, memory, storage, and software licenses used by deployments tied to a specific profile, thereby giving you finer-grained control over cloud resource consumption. The picture below shows the new resource limit aspects of environment profiles.
Virtual system patterns are key in the deployment model choices for IBM Workload Deployer. Not only did we carry the concept over from WebSphere CloudBurst to IBM Workload Deployer, but we made it even better. Expect this trend to continue!