Next up on our sneak preview of the building block sessions for the Enabling cloud computing with WebSphere campaign is the Dynamic Infrastructure Services block. One portion of that block is a discussion about some of the technical capabilities of WebSphere Virtual Enterprise given by Nitin Gaur. Nitin is a Consulting IT Specialist within WebSphere, and an all-around WebSphere guru. I caught up with him to ask a few questions about his upcoming podcast.
Me: When people think cloud computing, one of the core concepts is 'on demand'. They want just enough resource at just the right time. In that sense, can you tell me a little about the On-Demand Router (ODR) in WebSphere Virtual Enterprise (WVE)? What is it and what core functions does it provide?
Nitin: So, first allow me to take a step back. In my view, cloud computing is a new consumption and delivery model nudged by consumer demand and continual growth in internet services. I classify any Cloud computing platform exhibits the following 6 key characteristics:
Standards based delivery
Usage based equitable chargeback
I thus, deliberately use the term platform in the context of a cloud computing environment that facilitates flexibility, robustness and agility, as a systemic approach in providing a stage to hosting applications without the concern for availability or provisioning of underlying resources. Since hardware and software virtualization do offer significant cost and resource management advantages, it is not rare to see virtualized platforms as core building blocks of any cloud platform. Such virtualization technologies provide an elastic infrastructure service. In this respect, WVE provides application server virtualization, which enables an elastic business-policy-driven application infrastructure.
Now back to the On-Demand Router. The ODR is the autonomic engine that drives the activity enabling the elastic infrastructure discussed above. The ODR operates in a highly dynamic WVE environment, so it is imperative for the ODR to be aware of any changes in the environment such as newly deployed applications, the addition of new application servers, and any planned or unplanned server outages. It achieves this awareness by continuously interacting with WVE's fluid and dynamic feedback mechanism.
Me: Autonomic capabilities seem to be a core part of WebSphere Virtual Enterprise. To that end, can you tell us a little about the autonomic capabilities provided by dynamic clusters in WVE?
Nitin: Dynamic application placement is a defining capability of WVE that directly contributes to WVE's ability to provide a dynamic, virtualized, and goal-oriented environment for workload management and continuous availability. The dynamic application management capability maximizes the efficient use of hardware resources by allocating resources appropriately per application based on fluctuating demands in the enterprise infrastructure. It determines which servers to stop and start in a dynamic server cluster in order to meet current demand for applications, and it does this in the context of a set of administrator-defined policies that uphold the enterprise’s service level agreements (SLAs) for its application infrastructure. The dynamic application placement framework must balance resource availability against health policies, service policies, and the importance levels assigned to applications.
Dynamic server clusters are key to WVE’s ability to dynamically adjust the application environment according to server load, and they provide the basis for a virtualized server runtime environment. The big difference between a dynamic cluster in WVE and a static cluster in WebSphere Application Server is that dynamic clusters grow and shrink as needed to meet current demand by starting and stopping members of the cluster. Although dynamic clusters and static clusters can co-exist in a cell, dynamic application placement can only work with dynamic clusters. To prevent unchecked growth, each dynamic cluster has a mechanism that you use to define a boundary for that cluster’s growth. The boundary is both quantitative (based on criteria that define the minimum and maximum number of application servers that can run in the cluster simultaneously) and locational (based on criteria that confine the growth of the dynamic cluster to a defined set of nodes).
Me: I know you have been around the country, and for that matter globe, helping our users to adopt and implement WebSphere Virtual Enterprise. Tell us about one of your favorite customer stories.
Nitin: So I would cite an example of one of the leaders in the entertainment Industry (and my favorite customer), let's call them Company X (since I cannot cite the name). The core of the company's application infrastructure system is the Sales App Infrastructure (SAI) consisting of more than 10 enterprise applications. To keep up with demand, Company X was required to procure more hardware and software to support the core systems. This strategy resulted in a large infrastructure footprint with low hardware utilization. The increase in hardware footprint became difficult to manage and required additional resources. The large footprint of the company's deployment put them in reaction mode rather than a posture of proactive monitoring. Some application servers rendered themselves unavailable and required the team to restart them every 24 hours. From a cost standpoint, it costs the company the same amount of money to request a virtual platform as it would to purchase a new physical server. This led to significantly under utilized hardware throughout the enterprise. WVE was brought in to Company X to help better manage their WebSphere Application Server footprint. Dynamic clusters, application health policies, and application editioning features helped the company to better utilize hardware, reduce hardware expenditures, increase visibility into their applications, and improve availability of their applications.
In addition to helping with the existing environment, WVE helped Company X to roll out a new project with applications that required continuous availability to worldwide users. The team made use of policy-based workload management to ensure performance and availability levels of these new applications met their business needs. In addition, the company was able to reduce the amount of WebSphere Application Server licenses and physical servers required for this new deployment. In sum, WebSphere Virtual Enterprise saves the company significant time, money, and management effort.
As a final preview of this week's building block sessions in the Enabling cloud computing with WebSphere campaign, I caught up with WebSphere DataPower architect Tim Smith. Tim is delivering a podcast that introduces and explains the new Application Optimization capabilities in the WebSphere DataPower line of products. Here is what Tim had to say:
Me: I speak with quite a few customers about the WebSphere CloudBurst Appliance, and for once I'm happy to be the one asking this question. Why do we deliver WebSphere DataPower in the appliance form factor?
Tim: DataPower has become a dominant player in the DMZ and in the ESB. Much of the reason is that this is a purpose built hardware appliance. There are many things that our customers like about this appliance package. First, it has security as part of its DNA. The basis for securing connections, applies throughout the network whether it is in a DMZ or in an ESB. The physical box provides tamper resistant protection. Another reason is availability -- there are no spinning media, dual power supplies, and a focus on fail over support.
In both the DMZ and the ESB, there has been a proliferation of products. The main reason for the proliferation is that customers want to remove as many decisions from the general purpose server as possible, and let servers do what they do best, process application requests. The devices that have been proliferating make more decisions on the request. They do deep packet processing and routing. They also may transform the request into an entirely different request. So, there are an abundance of "pre-processing" decisions and operations made. With DataPower, many functions are integrated into the single hardware platform, giving you a smaller box count. No need to purchase and maintain several platforms, their OS and software versions, compatibility lists, etc. With a single hardware box that does so many things, we can greatly reduce the total cost of ownership for our users.
The DataPower appliance is a blend of Hardware and firmware that is well provisioned with hardware assists that help compile, parse, and assist in many of the intensive packet processing capabilities. To summarize, you get an extremely flexible and adaptable product that reduces total cost while increasing performance.
Me: A theme that comes up in cloud computing over and over is consolidation. Can you speak to the consolidation offered by WebSphere DataPower appliances with respect to the self-balancing capabilities?
Tim: Yes. My answer to the prior question was a long-winded way of describing DataPower's ability to consolidate many features into a single platform. Self-balancing is an example. As DataPower became more popular, larger installations required multiple DataPower appliances in a tier of platforms. A common architecture was to place a load balancer or IP sprayer in front of the tier to distribute the traffic evenly among the tier of DataPower appliances. An IP sprayer is an example of another platform that needs to be added to the environment. It is another box that must be purchased, managed, and maintained. Self-balancing is a feature that was added to DataPower to eliminate the need for an IP sprayer. The way it works is that one of the DataPower appliances in the tier owns the Virtual IP (VIP) Address. It receives all of the traffic, and then distributes it to each of the other DataPower appliances in the tier. If the DataPower appliance that owns the VIP address goes down, one of the others is elected and it takes over. The result is one less product required to support the same level of functionality.
Me: For much of the past, cloud computing mostly focused on virtualization and management of resources at the raw compute level (servers, storage, networking, etc.). While there is definitely ongoing focus here, we start to see it moving up the stack towards applications, and part of that effort includes more evolved application load distribution. With that in mind, how can WebSphere DataPower help users more effectively distribute requests to their applications?
Tim: If a front end appliance or gateway device can dynamically learn information about its environment, specifically the back end, it will be able to make better decisions on how and where to route the request. This is one of the tasks that the Application Optimization feature addresses. Information from the back end can of course be manually configured, but the real value in cloud computing is dynamically adapting when new server resources are brought on line or are taken off line. In the 3.8.0 release, we implemented something called Intelligent Load Distribution (ILD). Intelligent load distribution focuses on continually learning the topology of a back end, updating DataPower's load balancers with that information, and distributing the load based on the updates. In addition to the topology, ILD learns the weights associated with each server. These weights can continually and automatically change as traffic patterns change. The result is load balancing to the back end that sends the optimal amount of load to each server.
Another traffic distribution aspect incorporated into ILD is session affinity. When a server application needs to receive every request from a given client, session affinity is used to route the requests to the same server. In some sense, session affinity overrides the load balancing algorithm. The session affinity support works with any type of back end server, but with a WebSphere back end, all session affinity information is automatically configured.
Me: Continuing on the theme of application intelligence, what is this new Application Routing option in WebSphere DataPower?
Tim: ILD focused on learning the topology of the network and making better decisions based on an ever changing cloud topology. Application Routing does something similar by learning which applications are running on each server. Once a request is handed to DataPower's load balancer, the request is classified as to the application that it is targeted for. Then the request is load balanced amongst the servers that are running that application. The information to perform application routing is dynamically learned and changes as applications are added or removed.
WebSphere has invested substantially in managing the life cycle of an application. Changing from one edition of an application to the next sounds like an easy task, but it can be very difficult to perform this type of maintenance on a production environment. The DataPower appliance supports life cycle management by working with the WebSphere back end to provide group and atomic edition rollout. The rollout feature allows traffic to be gracefully diverted from servers that are being taken offline and reloaded with the new application edition. This rollout can be done while leaving the other applications on the server unaffected. This support makes edition rollout a very simple task for the system administrator.
I wanted to take a brief moment to remind you that the Enabling cloud computing with WebSphere campaign is well underway. Check out the various presentations and podcasts on solutions such as WebSphere Virtual Enterprise, WebSphere CloudBurst, Cast Iron Systems, WebSphere DataPower Application Optimization, WebSpan Integration as a Service Cloud, WebSphere Application Server Feature Pack for Dynamic Scripting, and more. All you have to do is navigate to the site, and you can download presentations or listen to audio/video replays at your convenience.
In addition to the podcast sessions, I want to point out a couple of upcoming events. The first is a live Q&A webcast that takes place next Thursday (9/23). Myself and other IBMers will be joining the webcast to answer your questions about cloud computing and WebSphere solutions. You can register to attend the session here, and you can submit questions ahead of time here.
A week after the live Q&A webcast (9/30), there will be an online JAM. Think of this as an online chat between IBMers and you, our users. You can ask questions, give us your feedback and suggestions, or just watch the proceedings. Like with the live Q&A webcast, you can submit questions ahead of time by navigating here.
I hope you are getting a chance to take advantage of some, or all of the campaign. Of course, you do not have to wait for the sessions to ask questions or give feedback. You can always leave a comment here or reach out to me on Twitter (@damrhein). Happy Friday!
When you build application environments in WebSphere CloudBurst, there are three main elements that comprise those environments: virtual images, patterns, and script packages. It is likely that at some point you will want to export your environments from a particular WebSphere CloudBurst Appliance. This may be in order to apply version control techniques, share resources among multiple appliances, backup business-critical files, or any number of other reasons. Whatever the reason, WebSphere CloudBurst provides the necessary facilities to support both image and pattern export. WebSphere CloudBurst provides export capability for virtual images that you can access via the web console and CLI. In addition, when you download the CLI from the appliance, you get a sample script called patternToPython.jy that you can use to facilitate pattern export.
The patternToPython.jy sample produces a script that you can use to recreate the targeted pattern on an appliance of your choosing. However, before running the script to recreate the pattern on an appliance, you must ensure that any images and script packages referenced by the pattern exist on the target appliance. Since WebSphere CloudBurst enables you to easily export and import virtual images, all you have to do is account for script packages when attempting to export complete application environments from WebSphere CloudBurst. While the appliance does not directly provide the means to export script packages like it does for images and patterns, the WebSphere CloudBurst Samples Gallery includes a sample that does. You can find this sample in the CLI scripts section of the samples gallery, with the title Export a script package in a portable format.
After downloading the sample CLI script, you simply unzip the archive and use the embedded Jython script from the WebSphere CloudBurst CLI with the following command:
This command will create a ZIP file containing the contents of the script package specified by SCRIPT_PACKAGE_NAME. In addition to simply copying the contents of the specified script package into the new ZIP file, the command will trigger the creation of a cbscript.json file based on the definition of the target script package. This file defines the properties of the script package such as the execution command, command arguments, etc., and the exportScriptPackage.jy script adds it to the newly produced ZIP file.
The result of using this sample is a self-contained ZIP file that you can load into any other WebSphere CloudBurst Appliance. Since the ZIP file includes the cbscript.json file, when you load it into another appliance you do not have to define any of the properties for the script package. This eliminates the potential for definition errors as you move script packages from one appliance to the other and makes it simple to export/import script packages among appliances.
There are a couple of things about the sample worth mentioning. First, if a cbscript.json file exists in the specified script package, the export script will not create a new one. Instead, the sample simply copies the existing one into the new ZIP file. Second, the target script package's contents must be a ZIP file. That is to say, the file associated with the script package in WebSphere CloudBurst must be a ZIP. If you are using anything prior to WebSphere CloudBurst 2.0, this is not an issue since you can only associate ZIP files with script packages. However, WebSphere CloudBurst 2.0 allows you to associate any type of file (ZIP, shell script, python script, etc.) with a script package.
If you are looking to effectively export all of the components of your WebSphere CloudBurst patterns, check out this sample script. I think it will make the process a bit easier for you. As always, comments and feedback are welcome.
The concepts that govern users and user groups in WebSphere CloudBurst are fairly basic, but I get asked about them enough that I believe they warrant a short discussion. First things first, you can define users in WebSphere CloudBurst and optionally define user groups to assemble users into logical collections. For both users and user groups, you can assign roles that define the actions a particular user or group of users can take using the appliance.
All of that is straight forward, but it can get a bit tricky once we start considering the effects of user permissions when managing at the user group level. The basic premise is that when a user belongs to a group or groups, the user's effective permissions are a sum of the permissions to all of the groups to which they belong. While that is easy to say, and maybe even to understand, I feel like an example always helps.
Consider that we have a single user WCAGuy that belongs to the PatternAuthors, ContentCreators, and CloudAdmins groups. The permissions for those groups are as follows:
PatternAuthors: Users in this group have permission to create and deploy patterns
ContentCreators: Users in this group have permission to create catalog content as well as create and deploy patterns
CloudAdmins: Users in this group have permission to administer the cloud, create catalog content, and create and deploy patterns
Naturally then, it follows that the WCAGuy user can administer the cloud, create catalog content, create patterns, and deploy patterns. So then, what happens if we remove the WCAGuy user from the CloudAdmins user group? Well, as you may expect, there is an update to the user's permissions. The WCAUser user can no longer administer the cloud, but they can still create catalog content, create patterns, and deploy patterns (owing to their membership in the other two groups). Similarly, if we next removed the WCAGuy user from the ContentCreators group, then the user would retain only the permission to create and deploy patterns.
Just one more thing, let's talk about what happens when I remove a user from a group and they no longer belong to any groups. Consider that I created the WCAGuy user with the permission to create catalog content as well as create and deploy patterns. Next, I added the user to the CloudAdmins group, meaning the user now has the permission to administer the cloud. I promptly decide that the user has no business with those permissions, so I remove the user from the CloudAdmins group. What happens? The user retains the permission set of the last group to which they belonged. In this case, that means the WCAGuy user retains cloud administration rights. I have to update the user's permission set if I want to take that right away, but in this case, it will not automatically disappear upon removing them from the CloudAdmins group.
I hope this helps clear up any ambiguity you may have had concerning users, user groups, and permission sets in WebSphere CloudBurst.
It seems like it was announcement day across IBM, and specifically in WebSphere. While the announcements were numerous and touched many different topics, I want to focus on a couple of announcements of particular interest to those of you interested in WebSphere CloudBurst and IBM Hypervisor Edition virtual images.
First, for all of our WebSphere Process Server and WebSphere Business Monitor users, there are a couple of important pieces of information in this announcement. This announcement outlines the availability of WebSphere Business Monitor Hypervisor Edition. The new image allows you to dispense WebSphere Business Monitor 7.0 environments using WebSphere CloudBurst to VMware hypervisors. In addition, the announcement outlines the expansion of the existing WebSphere Process Server Hypervisor Edition image to support the z/VM platform and the Red Hat Enterprise Linux (RHEL) operating system for VMware.
Moving beyond our BPM set of solutions, IBM also announced the availability of a WebSphere Message Broker Hypervisor Edition. This virtual image allows you to construct and deploy WebSphere Message Broker and WebSphere MQ environments using WebSphere CloudBurst. The stack includes the RHEL operating system, and it is ready to run on VMware hypervisors.
With that in mind, here's an update to the WebSphere CloudBurst supported product matrix:
* Availability subject to dates documented in referenced announcement letters
As you can see, we are continuing our effort to expand the choice you have when using WebSphere CloudBurst to create and deploy application environments to your cloud. If you are interested in using WebSphere CloudBurst for WebSphere Business Monitor, WebSphere Process Server, or WebSphere Message Broker, check out the above announcements. You will find more technical information as well as planned availability dates.
Just one last scrap of food for thought. Feedback from you, our users, is instrumental as we continue to expand software choice with WebSphere CloudBurst. Please continue to let us know your thoughts and needs!
It's really hard to complain about my work week right now. As I write this blog, I'm sitting in the Congress Center in Düsseldorf, Germany looking out over the Rhine River. As an aside, in Germany it is the Rhein River, and I have a historical connection to this body of water. My surname, Amrhein, translates (loosely) to 'on the Rhein'. It does not take an expert in genealogy to conclude that I have ancestors who at one time or another lived very close to this important German waterway.
Okay, putting the family tree aside for a minute, there is a good reason that I am in Düsseldorf this week. The city, and specifically the Congress Center, is playing host to the IBM European WebSphere Technical Conference. I am here presenting sessions that include a WebSphere CloudBurst overview, a WebSphere CloudBurst hands-on lab, and an up-close look at one of our internal team's use of the appliance. I have done each of these sessions once so far, and attendance was great, audience participation high, and feedback forthcoming. I am hearing and seeing the same thing in other sessions, which is of course, ideal for us presenters.
Now, to focus in on WebSphere CloudBurst for a bit, it seems that I am hearing a recurring question this week from the mostly European audience: "Why is WebSphere CloudBurst delivered as an appliance?" I am sure that I addressed this question in a previous blog post, but I believe it bears revisiting. There are various reasons I could give for the appliance form factor, but I like to distill all of that down into three major reasons: Consumability, Performance, and Security.
From a solution consumability perspective, nothing beats the appliance approach. WebSphere CloudBurst is an integrated hardware and software solution that delivers a specific set of function. You do not have to install software, procure and maintain storage for resources on the appliance (images, patterns, scripts, etc.), and maintain software components over time. You simply drop the appliance in to your data center, perform a one-time initialization, hook it up to the network, and you are ready to start leveraging WebSphere CloudBurst to build out your private cloud. While there is definitely work to setup the cloud infrastructure that WebSphere CloudBurst deploys environments to, we can completely eliminate a significant portion of solution implementation lead time by delivering everything you need in the appliance.
The performance benefits of an appliance approach are a natural result of building an integrated hardware and software stack. Design and development teams provide optimizations in both the hardware and software based on the fact that both the hardware and software have intimate knowledge of each other's design. In other words, this is not a 'least common denominator' tuning approach. Rather, the integrated design leads to enhanced performance for the specific set of functionality provided by WebSphere CloudBurst.
Finally, appliances enable us to deliver a very hardened, secure device. We provide private key encryption of every resource stored on the appliance. That private key is unique to each appliance and cannot be modified. In addition, the physical casing is tamper-resistant. If someone removes the casing, a 'Get Smart' style kill switch puts the appliance in a dormant state. You must send the appliance to IBM so we can reset it before further use, thus providing an additional layer of physical protection on top of the encryption. These security features, plus more, like a shield that prevents anyone from executing code on the appliance, come right out of the box and require no end-user configuration activity. In this way, you can simply focus on leveraging the user security and access controls provided by WebSphere CloudBurst.
If you had any questions on the rationale behind the appliance form factor of WebSphere CloudBurst, I hope this helps. I am off for now... back to the conference and the wonderful city of Düsseldorf.
I write a lot about WebSphere CloudBurst script packages. Typically, I write about what they are, how to create them, and even provide some samples from time to time. I find that most of the time I'm either writing or talking about script packages from the standpoint that they allow you to automate the delivery of customizations to environments you deploy with WebSphere CloudBurst. More specifically, I usually explain how you can include these script packages in your patterns to ensure that your custom scripts execute as part of every pattern deployment. The truth is, that is not the whole story. In fact, it's only 1/3 of the story.
In WebSphere CloudBurst, when you define a script package you also define its execution mode. The execution mode can be one of three values, and it indicates the invocation time for the script. The default value is at virtual system creation, and that tells WebSphere CloudBurst to automatically invoke the script as part of the deployment process. This seems to be the most commonly used execution mode, and in the original version of WebSphere CloudBurst it was the only available mode (which probably attributes to why I only usually tell 1/3 of the story here). As you may expect, there is a wide range of usage scenarios for this class of script packages including installing applications, activating monitoring agents, registering cells with an externally managed DNS server, and much more.
If you are like me (and many humans), you enjoy and actually expect symmetry. In that regard, it probably comes as no surprise that there is a script package execution mode called at virtual system deletion. As the name indicates, this class of script packages executes as an automatic part of the virtual system deletion process. When a user tells WebSphere CloudBurst to remove a virtual system, before it shuts down the machines in the system, it will run each script package marked to execute at virtual system deletion. Typical use cases for these scripts include removing information about the cell from externally managed DNS servers, freeing up connections with external systems, and other external 'clean up' activities.
So this leaves the final execution mode for script packages, the when I initiate it mode to be precise. This class of script packages executes when explicitly triggered by a user. In the virtual machine detail section for a deployed virtual system, you can see a list of user-initiated script packages for a given machine. There is a start button by each of the user-initiated script packages that allows you to invoke the script when, and as many times as you need to. While these script packages have many different use cases, the most common use case is to deploy application updates. Users build these application update scripts, attach them to a pattern, and invoke them whenever they want to deliver an updated application into their already deployed environment.
WebSphere CloudBurst script packages are one of the main vehicles for delivering your customizations to your cloud environments. The three execution modes mentioned above allow you to determine when the right time to deliver those customizations is.
In keeping with the impressive release pace, WebSphere CloudBurst 188.8.131.52 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 184.108.40.206, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 220.127.116.11 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 18.104.22.168, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 22.214.171.124, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
In my last post, I concentrated on the new enhancements to WebSphere CloudBurst 126.96.36.199. One of the major new additions was the introduction of Environment Profiles, and I promised a developerWorks article would be forthcoming. The article is now live along with a demo that showcases the capability of environment profiles.
As I mentioned in my last post, environment profiles center around giving you more customization capability during the pattern deployment process. In WebSphere CloudBurst, the pattern deployment process consists of the five main steps depicted below.
Traditionally, WebSphere CloudBurst controlled the entire deployment process, thus closing it off to the deployer. Environment profiles extend the customization reach of users to be able to effect steps 1-3 in the above diagram. Specifically, environment profiles give you the following control:
Control over the assignment of IP addresses and hostnames to pattern parts: Instead of having WebSphere CloudBurst automatically assign IP addresses, and thus hostnames, to virtual machines during deployment, you can explicitly set both values during the deployment process.
Ability to deploy single patterns to multiple cloud groups: Previously, when deploying a pattern you selected a single cloud group and WebSphere CloudBurst deployed all the parts in the pattern to machines within that cloud group. While this may be okay for many cases, other cases may require you to deploy some parts of the pattern to one group of machines while other parts map to a separate set of machines. Before environment profiles, you could accomplish this with multiple patterns. With environment profiles, you can accomplish it with a single pattern.
Ability to supply virtual machine naming standards: As part of deploying a pattern, WebSphere CloudBurst creates one to many virtual machines with distinct names. Environment profiles allow you to supply a naming standard that WebSphere CloudBurst will use when creating the machines as opposed to default naming schemes previously used.
It is important to note that the use of environment profiles is completely optional, and you can continue to use the traditional deployment process, thereby leaving WebSphere CloudBurst in control. That said, the introduction of environment profiles is a direct response to consistent user feedback we received regarding the need for more control during the deployment process. Based on my user conversations, these profiles address many of said needs in an easy to use, straightforward manner. We are, of course, eager to know what you think. As always, you can let me know right here, through email, or on Twitter (@damrhein).
Virtual image parts play a huge role in WebSphere CloudBurst. When crafting your own customized patterns, you include anywhere from 1 to n parts from as many different virtual images as is necessary. These parts represent the different node types or personalities within a given Hypervisor Edition image, and form the basis of your pattern. When you deploy a pattern, such as the one pictured below, WebSphere CloudBurst creates a distinct virtual machine for each part.
This means that after deploying the above WebSphere Application Server pattern, you will have four virtual machines comprising your virtual system. This gives you a clean separation of concern by providing a unique container for each of your application environment nodes. This can attribute to performance optimization, increased availability, and much more. However, this approach is not suitable to all use cases. In some scenarios, especially when trying to control costs and increase consolidation, you may want to deploy a multi-node WebSphere Application Server environment within a single virtual machine. Based on what I showed you above, you might think our approach in WebSphere CloudBurst makes this impossible, but you would be overlooking an important component of patterns.
That component is of course the second building block of patterns... script packages. As you probably know, script packages allow you to supply just about any customization you want. In the case that you want a single virtual machine to host a number of WebSphere Application Server nodes, maybe even an entire cell, all you need to do is supply a script package that constructs the necessary nodes during deployment. In fact, you don't even have to write the script package. You can use the free sample in our samples gallery. As seen in the pattern below, you include this script package on a sole deployment manager part in a pattern.
The script script package provides parameters that define the node name, number of custom nodes, and number of web server nodes you want in your cell. During the deployment process, the script takes this information and constructs the cell you define. This includes creating the custom and web servers nodes and federating the custom nodes, thus completing the creation of your WebSphere Application Server cell. In this case, the script package provides deployment flexibility that is sometimes a necessity, and it is just another example of the many degrees of flexibility enabled by the script package design.
I should point out that a part in a pattern does not always map to a single node. For instance, in the case of WebSphere Process Server, there is a part that represents a complete, multi-node golden topology encapsulated within a single virtual machine. However, if you find yourself using images that do not contain these multi-node parts, rest easy knowing script packages provide you the flexibility you need.
Usually when I am discussing WebSphere CloudBurst with clients, the subject of tracking usage comes up. While 'tracking usage' is pretty broad and could apply to any number of things, we often come back to two major concepts. First, users want to be able to track compute resource usage in the WebSphere CloudBurst cloud, as this helps in cloud capacity planning. Second, users want to be able to track usage by individual WebSphere CloudBurst users in order to facilitate chargeback. In both cases, WebSphere CloudBurst provides reports that help you.
When it comes to tracking compute resource usage in your WebSphere CloudBurst cloud, the appliance provides a set of pre-defined reports on the Cloud --> Machine Activity page.
As you can see from the snapshot above, WebSphere CloudBurst provides usage reports for both memory and CPU attributed to either individual hypervisors or virtual machines. In addition, the appliance tracks storage usage by device and IP usage in your cloud. For each report type, you can specify a desired date range and let WebSphere CloudBurst produce a graph showing usage over that time. The below picture shows the report for memory usage by hypervisor over a one month period.
Tracking compute resource usage is certainly important, but if your interests are mostly about using WebSphere CloudBurst to facilitate chargeback, you likely want to know about our user reports. You can find these reports on the Cloud --> User Activity page of the appliance. On this page, you will find a table that lists each user and their usage of virtual machines, CPUs, memory, and storage over a period of time that you specify. Further, you can download a comma separated value file that contains this data for further parsing or processing on your part. The image below shows an example of the user activity table.
In addition to the user usage data provided above, many WebSphere CloudBurst users find that they want to track the amount of time users had running virtual systems deployed through WebSphere CloudBurst. While the appliance does not provide a direct report with this information, you can use this free sample to calculate virtual system duration times. This free tool uses data available in the WebSphere CloudBurst audit log (data you can process to produce any custom report you need), and it calculates virtual system duration time as well as virtual system time attributed to each user. You use the WebSphere CloudBurst CLI to invoke this tool, providing it with your start and end dates for the calculation (you can find further invocation instructions inside the ZIP file containing the tool). The image below shows example output for both the virtual system duration and user virtual system time reports.
'Tracking usage' means many different things to different people and use cases. I hope the above information regarding usage tracking in WebSphere CloudBurst gives you a good idea of what you get out of the box, as well as what you can do by using the audit log (in a similar fashion to the free tool mentioned above). If you have any questions, requests, or feedback, please let me know.
Looking for a reminder of the difference a year can make? If so, just take a look at the last year or so for the WebSphere CloudBurst product. Since about this time last year, we have seen the release of versions 1.1, 1.1.1, 2.0, and 188.8.131.52, each one bringing their own set of major enhancements and features. Owing to this aggressive pace, it is sometimes easy to miss out on the latest capabilities of the product. For that reason, I wanted to give a brief rundown of some (definitely not all) of the major additions to WebSphere CloudBurst over the past year.
PowerVM and z/VM support: WebSphere CloudBurst 1.1 introduced support for PowerVM (based on Power5 and Power6 systems), and version 1.1.1 introduced support for z/VM. This means that a single WebSphere CloudBurst Appliance can provision to VMware, PowerVM, and z/VM virtualization platforms.
Power7 support: WebSphere CloudBurst 184.108.40.206 introduced support for Power7 systems, thus allowing users to take advantage of the significant enhancements provided by Power7 via WebSphere CloudBurst deployments.
Expansion of the IBM Hypervisor Edition portfolio: The portfolio of images that you can deploy using WebSphere CloudBurst now includes WebSphere Application Server, WebSphere Process Server, WebSphere Portal Server, WebSphere Business Monitor, WebSphere Message Broker, and DB2. In addition to adding new images, we also expanded the platform and operating system support for existing images. For example, you can take advantage of the Red Hat Enterprise Linux OS for WebSphere Application Server Hypervisor Edition, and you can deploy WebSphere Process Server Hypervisor Edition to z/VM infrastructure.
Addition of the Intelligent Management Pack: The Intelligent Management Pack is an optional feature of the WebSphere Application Server Hypervisor Edition that allows you to take advantage of autonomic, policy-driven runtime management capabilities in your deployed environments. This includes the ability to create proactive health policies for your environments, assign SLAs to your applications, manage the update of applications, and more.
License management capabilities: In WebSphere CloudBurst version 2.0 and later, you can make use of license monitoring and management functionality. This allows you to get both point-in-time and historical views of software PVU usage within your cloud, and it allows you to setup policies concerning the usage of PVUs for WebSphere CloudBurst deployments.
Environment profiles: WebSphere CloudBurst provides quite a bit of out-of-the-box deployment automation in terms of selecting hypervisors, assigning IP addresses, and more. However, sometimes you need more control over exactly how this happens. WebSphere CloudBurst 220.127.116.11 introduced environment profiles that you can use to exercise more control over how deployment happens in WebSphere CloudBurst.
In my view, this is quite an impressive list of features delivered within a year's time. I should also reiterate that this is by no means a complete list, but just a selection of some of the major enhancements during this time. If you have any questions about the above additions, or if you have any questions on other features, please let me know.
One of my favorite things to do is create content that you, our users, can directly use to adopt and implement our products. Luckily for me, my job allows me to spend a considerable time doing just that for our WebSphere CloudBurst Appliance. In the course of this kind of work, I use multiple different mediums to hand over what I hope is helpful content to you. This includes blogs, articles, demos, and the WebSphere CloudBurst Samples Gallery.
While I like creating content for all of these forums, if I had to pick a favorite, I'm going to go with the samples gallery every time. The reason for this is simple. Users can download and directly use the content in the samples gallery. The samples gallery plays host to script packages, CLI scripts, and other tools that are ready to use with WebSphere CloudBurst (of course, one can also extend these or simply use them as reference). Further, the samples in the gallery are mostly direct responses to suggestions or requests I get from users regarding this type of content, thus increasing its usefulness and relevance.
A good example of the kinds of assets in the gallery is the latest script package I put out there. Recently, I was talking to a user and asked, 'What do you do every single time you establish a WebSphere Application Server environment?' He outlined a few different tasks, one of those being the creation of virtual hosts in the server's configuration. The creation of virtual hosts piqued my interest because many users do that, and the configuration logic itself is fairly consistent regardless of the administrator doing the task. Therefore, I set about creating a sample script package that you can use to create virtual host configuration in WebSphere Application Server.
The script package does two things. It creates virtual host entries, and it configures host aliases for these entries. The script allows the user to supply the data for the entries and aliases they want to create via a properties file. The properties file is pretty basic and allows for the configuration of multiple host aliases for each virtual host entry. Here is an example properties file:
The script package parses the data from a properties file like the one above, and it creates the appropriate WebSphere Application Server configuration. If you are using WebSphere CloudBurst and this kind of configuration task is common for your deployments, you may want to download this free sample. I also want to point out that there are quite a few more samples that are completely free for you to download in the gallery. Check them out and let me know what you would like to see in the samples gallery!
When it comes to administration of WebSphere environments, I (and many others) am a big fan of scripting. In my view, any administrative action you carry out with frequency > 1 is ideally suited for a script. The downside to not using scripts (longer configuration times, inconsistent configurations, isolated expertise) is simply too steep in most cases. I also realize that simply saying that you should script is not enough. For some, the learning curve can be a bit daunting. Quite frequently, I talk about our samples gallery or provide posts with embedded scripts in the hopes that I can help flatten out this curve a bit.
While these samples can certainly help to speed up your scripting efforts for certain use cases, they are more or less helpful for solving tactical challenges when scripting. If you and your company are embarking down a strategic path that includes beefing up your administrative scripting capability, I would strongly suggest you look at a resource a few of my colleagues pointed me at recently.
The resource I am talking about is the wsadminlib.py package referenced here. This python script file is a collection of hundreds of methods that carry out common WebSphere Application Server administrative tasks. The authors carefully constructed these methods with clear method and parameter names. The result is a script resource that can become the foundation for your custom-crafted administrative scripts.
I recently downloaded the wsadminlib.py script and began constructing WebSphere CloudBurst script packages to utilize it. To say I am impressed would be an understatement. This file makes so many tasks so incredibly simple. Take for instance the creation of an SIBus. That's just a simple call like the following:
wsadminlib.createSIBus(clusterName, nodeName, serverName, SIBusName, scope, secure)
How about associating a shared library with an application or application module? Another one-line call:
wsadminlib.associateSharedLibrary (libName, appName, warName)
Or what about setting a custom property in the webcontainer? You guessed it. One-line:
wsadminlib.setWebContainerCustomProperty(nodeName, serverName, propName, propValue
This is just an extremely small sample of what the wsadminlib.py includes. As I mentioned earlier, there are hundreds of other methods that carry out various tasks including: installing applications, creating core groups, creating virtual hosts, installing BLAs, creating JMS queues, and much more. If you are looking to beef up your WebSphere Application Server scripting efforts, or if you are just starting, I strongly encourage you to look into and make use of this valuable resource!
I spend most of my time talking with our users about the WebSphere CloudBurst Appliance. While I believe the appliance is somewhat of a hybrid among the Infrastructure as a Service and Platform as a Service layers of the cloud, it is definitely closer to IaaS than PaaS. Users recognize that, and they can identify the capabilities of WebSphere CloudBurst that correlate with IaaS cloud functionality.
That said, I often get questions regarding IBM and work in the PaaS arena. These include questions like, 'Is IBM planning to do anything with PaaS?', 'What is your take on PaaS?', 'What kind of applications do you plan on targeting with your PaaS offering?', and more.
Well, rest assured that IBM is definitely embracing the PaaS movement. Instead of trying to answer these questions in this post though, I want to make you aware of a recent InfoQ interview with IBM WebSphere CTO, Jerry Cuomo. In the interview, Jerry answers the questions above and much more. Jerry talks about IBM's plans for PaaS, what such a platform might look like, and how he sees IBM competing against some of the cloud players in this space.
The interview runs about a half hour, but there is a very nice table of contents that allows you to navigate to specific question/answer segments with Jerry. If you are interested in PaaS, and specifically in IBM's intention in this space, I encourage you to take a look at the interview. Let me know what you think!
Over time, many of our users learn to effectively leverage WebSphere CloudBurst user roles and fine-grained access controls to map activities and responsibilities in the appliance to the appropriate people and teams within their organization. Using these controls, they are able to define actions that a user or group can take, and they can define the set of resources on which they can take those actions. It is efficient, flexible, and an absolute necessity in many enterprise scenarios.
In some cases though, I talk with users that want a little more control, or probably better put, governance over the actions a user can take within a given role. Most often, this need arises when the discussion of pattern authoring comes up. If you want a user in WebSphere CloudBurst to be able to create patterns, you simply give them the Create new patterns permission. Once you give them that permission, the user can create patterns using both virtual image parts and script packages in the catalog. For many of the users I talk with, this approach suits their needs.
However, in some scenarios administrators want a little more insight and control over how the pattern authors build their patterns. Specifically, they want to ensure that patterns contain only approved virtual image parts and script packages. While you can certainly use the fine-grained access controls of the appliance to expose only the 'approved' virtual image parts and script packages, that alone may not be enough. After all, the definition of what is 'approved' may be different when building a pattern for testing purposes versus one built for production purposes. If the same pattern author builds both of those patterns, fine-grained access controls do not help as much. So, what can you do?
Have I ever told you how much I love the WebSphere CloudBurst CLI? It's powerful, easy to use, and a great automation enabler. It is also the perfect tool for our problem above. If you are looking to enforce certain constraints on WebSphere CloudBurst patterns, I strongly recommend using the CLI as a governance tool.
To provide a concrete example of what I mean, let's take a look at a generic pattern checking script I am working on now (I hope to have this in the samples gallery soon). Consider the case that I want to check that all of my test patterns for a specific application environment contain 1 deployment manager and between 1 and 3 custom nodes. In addition, I want to make sure that the parts for these nodes come from an approved virtual image, and I want to verify that the deployment manager contains the correct application installation script package. With the script I am currently writing, you would start by encapsulating this information in a properties file.
PatternAssertion_1=Customer Processing Test Environments
PatternAssertion_1_Requirements=Deployment manager:1:415:Install customer process app;Custom nodes:1-3:415
In the above, the PatternAssertion_1 key provides a name for the pattern verification assertion. The PatternAssertion_1_Requirements key provides the requirements for the pattern. The above requirements indicate that for a pattern to meet the assertion, it must contain 1 deployment manager part from the virtual image with reference number 415. In addition, the deployment manager must contain a script named Install customer process app. A valid pattern must also contain 1 to 3 custom node parts, also based on the virtual image with reference number 415. When done defining my requirements in the properties file, I simply invoke a script and pass in the file. As a result, I get information about which patterns satisfy or do not satisfy the assertions. For example:
The Customer Process Application pattern satisfied the requirements of the Customer Processing Test Environments assertion.
OR The Customer Process Application pattern did not satisfy the requirements of the Customer Processing Test Environments assertion
due to the following reason: The pattern is required to have a minimum of 1 and a maximum of 3 Custom node part(s), but it had 4.
As I said, I hope to have this sample script posted to the samples gallery soon. I am going through some final revisions and enhancements that I hope make it better and more generally applicable. In the meantime, I wanted to point out that pattern governance is indeed doable, and in fact not very hard to achieve with the CLI. I will be sure to post an update when the sample script is ready. In the meantime, let me know if you have any questions or comments.
In the course of my job, I am lucky to be able to work with both enterprise users and business partners who are adopting and using the WebSphere CloudBurst Appliance. When it comes to the business partner camp, one of my absolute favorites is the Haddon Hill Group. The Haddon Hill Group is an IBM Premier Business Partner, and they have been an early adopter and vocal advocate of the WebSphere CloudBurst Appliance. They have extensive knowledge of the use of the appliance in enterprise accounts, and quite frankly, they are doing some really cool things with WebSphere CloudBurst.
Given the above, I was glad to see summarized results from their various implementations made available recently on the IBM site. The summary is fairly concise, so I encourage you to take a look at the results Haddon Hill Group is getting with WebSphere CloudBurst.
I am not going to rehash the contents of the results here, but there are a couple of things I want to call out. First off, Haddon Hill Group says that WebSphere CloudBurst can provide companies with a '100 times faster time to market' delivery experience. In a practical sense, this means reducing the amount of time to deliver WebSphere environments from 40-60 days on average to just hours. That is an eye-opening data point!
The other thing I want call out here is a quote from Phil Schaadt, President and CTO, Haddon Hill Group. I have had the pleasure of working with Phil and team, and I have heard him echo these same sentiments many times:
"The important thing about the IBM WebSphere CloudBurst Appliance is that it will dispense a WebSphere Application Server image onto your WebSphere Application Server environment or private cloud along with other products within the WebSphere stack, and that application server will be ready in a few minutes. You can do it in a clustered environment, and you can even roll out IBM WebSphere Process Server and get it right in a fully clustered environment with a database connection, in about 90 minutes. You can also easily manage all the configurations of IBM WebSphere Process Server that you need. All the steps that took up so much time and effort on the part of IT staff have been removed. The savings for companies with large WebSphere implementations can be in the millions."
It is always great to see clients putting our technology to use to produce tangible business value. Again, I encourage you to take a look at these reports. As always, I am eager to hear what you think, so leave me a comment or reach out to me on Twitter @damrhein.
A couple of weeks ago, I wrote about a sample I was working on that would allow one to apply a layer of governance to their WebSphere CloudBurst patterns. Earlier this morning, I posted the sample to the WebSphere CloudBurst Samples Gallery under the 'Sample CLI Scripts for WebSphere CloudBurst' section. The name of the new sample is 'Check WebSphere CloudBurst patterns', and you can download it here.
As hinted in my earlier post, the new sample is a simple way to check your patterns against assertions you supply in a properties file. It allows you to check that patterns contain the correct parts and scripts, and it allows you to verify that they were built from valid images. The assertion format is pretty basic, but it should be flexible enough to allow you to check patterns against a wide array of requirements. The sample archive includes a readme file that explains exactly how to use the script, and it contains a sample assertions file to give you an idea of the input syntax.
I hope this helps to address some of the requirements of many WebSphere CloudBurst users that told me they were in need of a way to apply governance to their patterns. If you have any questions about the sample, please let me know. Alternatively, if you have another idea or a problem you would like to see addressed by a sample in our gallery, please let me know.
I spent most of my time growing up doing two things, going to school and playing sports. I made many fond memories -- mostly from the latter :) -- and learned more than a few lessons over that time. Of all of those lessons, there was one in particular that stuck out in both the classroom and on the baseball diamond: Sometimes you have to get back to the basics.
In that vein, I think it is time to revisit the basics of WebSphere CloudBurst. In revisiting the basics, I am not talking about the technical basics of the appliance. Rather, I am talking about revisiting exactly why WebSphere CloudBurst exists in the first place. In other words, let's take a look at the problem domains WebSphere CloudBurst addresses, and let's discuss a little bit about how the appliance does so.
The majority of my posts on this blog address using various features of WebSphere CloudBurst to build private cloud computing environments. Today though, I want to switch gears and instead of talking private cloud, let's talk public cloud. Specifically, let's take a look at the capabilities and services delivered via the IBM Smart Business Development and Test on the IBM Cloud (hereafter referred to as the IBM Cloud).
For some of you, the fact that IBM has a public cloud offering may be a little surprising. After all, if you listen to some uninformed critics you may hear that IBM only cares about private clouds for large enterprises. That is simply untrue. The IBM Cloud is an Infrastructure as a Service public cloud that delivers rapid access to services hosted on IBM infrastructure via a self-service web portal. The IBM Cloud offers multiple payment options, including usage-based billing and reserved capacity billing, and even features a cost estimator so you can confidently establish a monthly budget for your usage.
Regardless of whether you use a private or a public cloud, security should always be a chief concern. As such, IBM takes security very seriously in the IBM Public Cloud. The infrastructure that constitutes the cloud is subject to internal IBM security policies that include regular security scans and tight administrative governance. Your data and virtual machines stay in the data center to which you provisioned them, and physical security policies match those of internal IBM data centers. Additionally, you can optionally make use of the virtual private network option to isolate access to the virtual machines that you provision on the IBM Cloud. Rest assured that security in the IBM Cloud was a guiding design principle and not an afterthought.
With the basics out of the way, let's get on to the question I'm sure you have: What can I run on the IBM Cloud? To get you started, the IBM Cloud provides a nice list of public images in its catalog that are ready for you to provision. These images include WebSphere Application Server, WebSphere sMash, DB2, WebSphere Portal Server, IBM Cognos Business Intelligence, Tivoli Monitoring, Rational Build Forge, and many more. In addition to the public images provided by the IBM Cloud, you can build your own private images. Private images allow you to start with a base public image and then customize it by adjusting the configuration or installing new software. Once customized, you can store these private images on the IBM Cloud and provision them whenever needed. Whether you are using public or private images, you have a number of server configurations to choose from in order to host your environments.
While very brief, I hope this overview provides you with some of the more important details regarding the IBM Cloud. There are few, if any, service providers out there with the enterprise expertise of IBM, and I think you see that reflected in the IBM Cloud. If you are looking at public cloud options for your enterprise application environments, you should definitely take a closer look at the IBM Cloud.
One of my favorite things to do with users or potential users of WebSphere CloudBurst is to help them understand how they can construct a custom environment using the appliance. Typically, we take one of their existing application environments and discuss the configuration steps that contribute to its makeup. From there, we map the required configuration actions to different customization capabilities in the appliance. It is one thing to talk about how you can customize every layer of your application stack with WebSphere CloudBurst, it is quite another to talk about it in the context of an existing environment. This exercise usually serves to greatly enhance a user's understanding of how to construct tailored environments with the appliance.
While I cannot take every one of you through this exercise in the context of one of your own application environments, I can propose a scenario that will help to illustrate the WebSphere CloudBurst customization process. Consider that I want to deploy a clustered WebSphere Application Server environment whose application server instances utilize WebSphere DataPower XC10 for HTTP session management. In order to deploy such an environment, I would need to do the following:
Install an OS and WAS
Install the WebSphere eXtreme Scale Client binaries - required for integration
Construct a clustered cell
Augment profiles with WebSphere eXtreme Scale profile templates
Configure the application server instances to use WebSphere DataPower XC10 for session management
So those are the steps, but how do they map to WebSphere CloudBurst? First, I know that the WebSphere Application Server Hypervisor Edition image used by WebSphere CloudBurst encapsulates the installation of the OS and WAS. I also know that WebSphere CloudBurst will automatically construct the clustered cell during the deployment process. That means I need to address the installation of client binaries, augmentation of profiles, and configuration of application server instances. In order to do this, I will use a combination of image extension and custom script packages.
To get started, I extend an existing WebSphere Application Server Hypervisor Edition image and simply install the WebSphere eXtreme Scale Client binaries. I then capture that image and store it as my own unique image in the WebSphere CloudBurst catalog. Now, you may wonder why I did not capture the profile augmentation in the custom image. Remember, you cannot change profile configuration during the extend and capture process as WebSphere CloudBurst resets the profiles as part of capturing the custom image.
My custom image encapsulates the installation of the client binaries, so now I turn to custom script packages. I need two in this case. One script package will augment a profile (either deployment manager or custom node) with the WebSphere eXtreme Scale profile template. The second script package will configure application server instances to use WebSphere DataPower XC10 for HTTP session management. Once done with these script packages, I have all the assets I need to build my target environment.
Using my custom image, I build a pattern that contains the number and kind of WebSphere Application Server nodes that I want. I use the advanced options to define a WebSphere Application Server cluster ensuring its creation happens during deployment. Next, I drag and drop the profile augmentation script onto the deployment manager and custom node parts in my pattern. Finally, I drag and drop the WebSphere DataPower XC10 configuration script onto the deployment manager. The pattern is now ready to deploy!
For those of you that are visual learners like me, this demonstration provides a nice overview of exactly what I wrote about above. Check it out and let me know what you think.
Maybe you remember, but not long ago I wrote a post about scenarios when WebSphere CloudBurst and Rational Automation Framework for WebSphere (RAFW) combine to form quite the pair. You can read that post for details, but the basic scenarios were configuring and capturing, importing existing environments into WebSphere CloudBurst, and migrating from virtual to physical installations. Well, after talking with customers and colleagues lately, you can add another scenario to the list: version-to-version WebSphere Application Server migrations.
I want to be clear here about one thing before I go further. I am in no way advocating against the use of the migration tooling that ships with WebSphere Application Server. It is an excellent tool that can make migrations simple and fast. I am merely pointing out that when it comes to version-to-version migrations you have options, and you should survey them all before making a decision.
With that understanding, let's take a look at WebSphere CloudBurst and RAFW in the context of a version-to-version migration. This integrated approach to migration is ideal if you are amenable to moving up to a newer version of WebSphere Application Server in a cloud-based environment. Using both products makes migrations fast and easy, and you can be very confident that the configuration of the migrated environment is faithful to the original. The figure below shows the basic flow of the migration and breaks it down into a set of discrete steps.
Now, for a quick break down of each step:
Extract config & apps from old environment: The first step involves pointing RAFW at your existing configuration, the one you want to migrate from, and using an out-of-the-box action to import all of the configuration into a RAFW environment. You can also import your application binaries in this step.
Store config & apps from old environment: In step two, you will store the extracted configuration and application binaries in a source control repository or some backup location separate from your RAFW server. This is an optional, but recommended step.
Analyze and update apps: Before migrating your applications to the newer version of WebSphere Application Server, you can use the completely free Application Migration Toolkit to analyze the source code of your applications. This toolkit will recommend any required updates to ensure your application continues to behave as expected when moving to the new version. Again, this is an optional step, but the toolkit is free and very handy. So, why not?
Deploy new version of the environment: Step four starts by building a new WebSphere CloudBurst pattern. This new pattern matches the topology of the environment you are migrating from, and you build it from an image containing the version of WebSphere Application Server to which you want to migrate. Once built, you deploy it to your private cloud and you have a running environment in minutes.
Apply stored config and deploy updated apps: Now that you have your new environment up and running, use RAFW to apply the configuration you extracted from your old environment. RAFW inherently understands any configuration translation that needs to occur to apply the old configuration to your new environment, and it can also deploy your updated applications for you.
That's the basic overview for version-to-version migrations when you are moving to a cloud-based environment. In time, I will be posting more information about this process to shed a little more light about what is going on under the covers. In the meantime, you know how to reach me if you have questions!
One of my favorite books from childhood is If You Give a Mouse a Cookie. Although targeted at children, the book illustrates a frequently occurring human behavior that is important for all of us understand. That behavior is the tendency for escalating expectations. The book offers this up by starting out with the simple action of giving a mouse a cookie. The mouse in turn asks for a glass of milk, various flavors of cookies, and on and on, until the mouse circles back to asking for another cookie.
Nearly all of us exhibit this same kind of behavior, and it can often produce positive results. In particular, in IT we always push for the next best thing or a slightly better outcome. Personally, I am no stranger to this behavior because I experience it from WebSphere CloudBurst users quite frequently. In these cases, it usually revolves around one particular outcome: speed of deployment.
Bar none, users of WebSphere CloudBurst are experiencing unprecedented deployment times for the environments they dispense through the appliance. The fact that we say you can deploy meaningful enterprise application environments in a matter of minutes is far beyond just marketing literature. Our users prove it everyday. However, just because they are deploying things faster than ever does not mean they are content to rest on those achievements. They want to push the envelope, and I love it.
For our users looking to achieve even speedier deployment times, I offer up one reminder and one tip. First, analyze all of your script packages to ensure you are using the right means of customization. If you have some scripts that run for considerably longer than most other script packages, you may want to at least consider applying that customization by creating a custom image. You still need to adhere to the customization principles outlined here, but you may benefit from applying the customization in an image once and avoiding the penalty for applying it during every deployment. You may also be able to break this customization out with a combination of a custom image and script packages. For instance, instead of having a script that installs and configures monitoring agents, you may install the agents in a custom image and configure them during deployment. Being selective about how and when you apply customizations can go a long way in improving your deployment times.
In addition to the reminder above, I also have a tip. Take a look at all of the script packages you use in pattern deployments and look to see if there are any that you can apply in an asynchronous manner. In other words, identify customizations that need to start, but not necessarily complete as part of the deployment process. Going back to our example of configuring monitoring agents during the deployment process, it may be important to kick off the configuration script during deployment, but is it crucial to wait on the results? Maybe not. If it is not, consider defining the executable argument in your script package in a manner that kicks off the execution and proceeds -- i.e. nohup executable command &. This approach can save deployment time in certain situations.
My advice to users of WebSphere CloudBurst: keep pushing your deployment process! Pare as many minutes off the process as you can. I hope that the tips above help in that regard, and be sure to pass along other techniques that you have found helpful.
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
Are you planning on attending IBM IMPACT? For all of you WebSphere users out there, I sure hope the answer to that is yes. Simply put, there is no better event to attend in order to learn about everything going on across the IBM WebSphere portfolio. There is already an exciting array of technical sessions lined up that will touch on topics such as analytics, big data, cloud computing, elastic data caching, enhanced automation, business process management, hybrid clouds, and much more. In addition to the sessions, you will also get plenty of chances to work directly with various WebSphere solutions in our labs. For my fellow hands-on learners, this is a great opportunity.
We have technical sessions and labs every year at IMPACT though, so you may be wondering besides the content, what's new?? Well, in that regard I'm excited to point out that this year's IBM IMPACT will host the first ever WebSphere Unconference! For those of you unfamiliar with the unconference format, the basic idea is that a group of folks with common interests (cloud computing, big data, etc.) get together and drive a series of conversations/sessions around these topics of interest. The unconference will include lightning talks (5 minutes to make a point!), guest appearances, as well as user-driven breakout sessions. These events are a great way to network with fellow WebSphere users, discuss cool technology, explore common challenges, and otherwise expand your areas of interest and knowledge.
The official website of the WebSphere Unconference recently launched in order to support this event. Besides giving you some details about the unconference, the website allows you to submit your own ideas for breakout sessions. All you need to do is sign up on the site, and you can start to put forth your own topic ideas. You can vote for the different sessions that interest you, and the top vote getters will earn a spot during the unconference.
I encourage you to go and have a look at the WebSphere Unconference website. It is easy to sign up and easy to use. If you are heading to IMPACT, please make time to at least drop by the unconference on Thursday. I promise you will benefit from engaging, attendee-led conversation and discussion. I hope to see you there!
In previous posts, I have discussed the integration capability between WebSphere CloudBurst and Tivoli Service Automation Manager. Most recently, I discussed this in the context of integrating WebSphere and IBM CloudBurst. Today, I am happy to announce the publication of an article I co-wrote with Marcin Malawski from TSAM development on the subject of this integration.
If you are a WebSphere user interested in a holistic approach in building out a private cloud, I strongly recommend that you check the article out. If you are currently an IBM CloudBurst, IBM Service Delivery Manager, or Tivoli Service Automation Manager user and you provision a significant number of WebSphere environments, I strongly recommend that you check the article out. In fact, regardless of your current situation, do me a favor and check the article out!
As always, I look forward to feedback and comments. Good, bad, or indifferent. You can leave your comments here or on the article page. I look forward to hearing from you!
When I talk with WebSphere CloudBurst users, the topic of custom virtual images comes up frequently. In some cases they simply want to customize a shipped IBM Hypervisor Edition, and in other cases they want to create a completely custom image. Creating a customized version of an IBM Hypervisor Edition is relatively easy since we give you extend & capture in WebSphere CloudBurst. Creating a completely custom image has historically been a bit tougher, mostly owing ot the fact that there was not a standard tool or process for image assembly. I am happy to say that today's publication of the IBM Image Construction and Composition Tool changes all that.
Watch a demo of the IBM Image Construction and Composition Tool
The primary purpose of the Image Construction and Composition Tool is to enable a modular approach to virtual image construction, while taking into account the typical division of responsibilities within an organization. The tool allows the right people within an organization to contribute their specialized knowledge as appropriate to the virtual image creation process. This means OS teams can handle the OS and software teams can handle the appropriate software. A separate image builder can then use both OS and software components to meet the needs of users within the organization. Best of all, the image builder does not need intimate knowledge of how to install or configure any of the components in the image. They simply need to know which OS and software components to use.
When using the Image Construction and Composition Tool, you start by defining the base operating system you wish to use for your images. You can do this by importing an existing virtual image with an OS already installed, providing an ISO for the OS, or pointing to a base OS image on the IBM Cloud. The bottom line is that you have necessary flexibility to start with your certified or ‘golden’ operating system build. Once you have the base OS image defined in the Image Construction and Composition Tool, you can start defining custom software for use in the images you will compose.
In the tool, bundles represent the software you wish to install within a virtual image. The definition of a bundle contains two major parts: Installation and Configuration. The installation component of a bundle tells the Image Construction and Composition Tool how to install your software into the virtual image. You provide a script or set of scripts that install the necessary components into your image, and you direct the tool to call these scripts. These tasks run once during the initial creation of the virtual image, thus allowing you to capture large binaries, long-running installation tasks, or other necessary actions directly into your image.
The configuration section of a bundle defines actions that configure the software installed into the image. Like with the installation tasks, you provide a script or set of scripts for configuration tasks. Unlike installation tasks that run exactly once, configuration scripts become part of the image’s activation framework and as such, run during each image deployment. Using the tool, you can define input parameters for configuration scripts and optionally expose them so that users can provide values for the parameters at image deploy-time. Configuration tasks are important in providing flexibility that allows users to leverage a single virtual image for a number of different deployment scenarios.
Once you have your base OS image and one or more bundles defined in the Image Construction and Composition Tool, you can compose a virtual image. To compose a virtual image, you extend the base OS image and add any number of bundles into the new image. A base OS image plus a set of bundles defines a unique image.
After you define the image you want to construct, you initiate a synchronize action in the Image Construction and Composition Tool. When you start the synchronize action, the tool first creates a virtual machine in either a VMware or IBM Cloud environment (based on how you configured the tool). Next, the installation tasks of each bundle you included in the virtual image run to install the required software. Finally, the tool copies the configuration scripts from each bundle into the virtual machine and adds them to the image’s activation framework. This ensures the automatic invocation of all configuration scripts during subsequent image deployments.
Once the image is in the synchronized state, you can capture it. Capturing the image results in the creation of a virtual image based on the state of the synchronized virtual machine. The tool also automates the generation of metadata that becomes part of the virtual image package. When the capture of the virtual image completes, you can export it from the Image Construction and Composition Tool and deploy it using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
I am excited for users to get their hands on the Image Construction and Composition Tool. I believe it represents the first big step in helping users to design and construct more sustainable virtual images. Did I mention it is completely free to download and use? Visit the Image Construction and Composition Tool website for more details and a download link. I look forward to your comments and feedback.
Since bundles are such a core component of the IBM Image Construction and Composition Tool, I thought it would help to take a closer, more thorough look at them than I did in my post last week (if you have not already, I suggest reading the overview post before continuing). To help us in our closer examination, we will consider an example bundle I built using the IBM Image Construction and Composition Tool. The example bundle I built encapsulates the logic to install and configure WebSphere Application Server Community Edition. Let's take this step by step.
The first part of the bundle is the General section. This section allows you to provide a name and description for the bundle, the bundle ID and version, and the products represented by the bundle.
The next section of a bundle is the Requirements section. In this section, you can define the operating system and software requirements for your bundle. In the OS section, you specify the type, distribution, and version level of the OS your bundle requires. In the software section, you can indicate that your bundle requires other bundles defined in the IBM Image Construction and Composition Tool. You do this by providing the bundle ID for required bundles.
Next, we move on to the Install section of the bundle. Two major subsections make up this section. The first subsection is the Files to Copy section. Here, you provide files, via a file upload dialog or by providing a URI, and you specify a destination directory. When you add a bundle to an image and initiate the synchronization process, the IBM Image Construction and Composition Tool will automatically copy the files you list here to the specified destination directory on the virtual machine. In the sample WebSphere Application Server Community Edition bundle, I specify a single install.sh file to copy to the virtual machine.
The second major subsection of the Install section is the Command subsection. In this section, you will specify the installation command that the IBM Image Construction and Composition Tool should automatically invoke during the synchronization process. Additionally, you can define variables that you want to make available to your installation scripts. The tool makes these available as environment variables for the process within which your script runs. In the sample bundle, I tell the Image Construction and Composition Tool to invoke the install.sh script specified above, and I define parameters that specify the location of the binaries to install, the location to install the binaries on disk, and more.
The next section in a bundle is the Configuration section. The configuration section allows you to define configuration operations that provide actions that execute for each deployment of an image containing the bundle. You can define 0 to N configuration operations in a bundle, and each configuration operation definition contains three major subsections. The first is the Files to Copy subsection. This subsection is similar to the Files to Copy subsection in the Install section. You provide files or file URIs and you provide a destination directory to which the tool will copy the file. The WebSphere Application Server Community Edition bundle contains a single configuration operation called ConfigWASCE. In the Files to Copy section, I define a single file to copy into the image's activation engine directory.
The second major subsection in the configuration operation definition is the Command subsection. Like the Command subsection in the Install section of the bundle, you specify a command to execute and optionally associate variables with the command. There is a key difference between the command definition for configuration operations as opposed to installation operations. The Image Construction and Composition Tool invokes the command you specify for installation operations exactly ONCE at image creation (synchronization) time. On the other hand, commands you specify in the configuration operation definition execute EACH time someone deploys an image containing your bundle. In the sample bundle, my ConfigWASCE.sh script will automatically execute for each deployment. The tool will package the image in such a way that ensures the automatic passing of parameters defined in the Arguments list (including num_servers, WASCE_HOME, and more) to the ConfigWASCE.sh script.
The final major subsection of a configuration operation definition is the Dependencies section. This allows you to define other services on which your configuration operation is dependent. This can include other configuration operations in the same or other bundles, and it can include general operating system services. The WebSphere Application Server Community Edition sample bundle includes a few dependencies.
The Install and Configuration sections are really the meat of your bundle, but there is more. There is a Firewall section that allows you to define port ranges and associated protocols that the IBM Image Construction and Composition Tool should ensure are open when provisioning an image containing your bundle. Currently, the tool supports firewall configuration data when building images for the IBM Cloud. The Reset section of the bundle allows you to define tasks that should execute when capturing the image back into the Image Construction and Composition Tool (after synchronziation completes). This allows you to clean up the state of the image after the install completes. Reset configuration is not currently available in the alphaWorks version of the tool. Finally, there is a License section where you can define software licenses associated with your bundle. The tool automatically adds these licenes to the constructed image's metadata, thereby allowing deployment tools to prompt the user to accept all pertinent licenses. The WebSphere Application Server Community Edition sample bundle defines a product license.
Of course, once the bundle definition is complete, you can leverage it to compose and produce an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. In the case of the WebSphere Application Server Community Edition sample bundle, I used it to create an image that I loaded into WebSphere CloudBurst and used to build patterns.
I hope this helps to provide a better idea of what bundles are all about in the Image Construction and Composition Tool. Don't forget to take a look at the overview demo and stay tuned for more to come about this new tool!
In last week's post, I put the spotlight on various aspects of bundles in the Image Construction and Composition Tool. I finished with a look at a WebSphere CloudBurst virtual image created from the bundle. However, you do not just magically go from a bundle to an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. Today, I want to show you how to go from a bundle to a custom virtual image using the IBM Image Construction and Composition Tool.
Once you have defined at least one bundle and one base operating system image, you are ready to compose a custom image. We already talked about creating a bundle, but the base operating system image is a new topic. You can do this by either starting from ISO and kickstart configuration files, or you can import an existing Open Virtual Appliance (OVA) image that contains your operating system of choice. Once you have that base image imported or defined in the Image Construction and Composition Tool, you can extend it to create a custom image on top of the base OS image.
After creating your extended image, you can add bundles that represent the software you want to install in your custom image. Simply click on the Software tab of the new virtual image. Click the add icon, and select the bundle that you want to add. You can add as many bundles as you would like to your custom image.
After adding a bundle, it will show up in the Planned list of software for the image. Click on it to display its details in the right side of the screen. You will notice General, Install, and Configuration sections for the bundle. In the Install section, you will find a list of the installation parameters you defined for the bundle. You can provide values for the parameters at this time.
If you click on the Configure section, you will see all of the configuration paramters you specified for the bundle. You can provide default values, and you can specify whether or not these should be configurable by deployers of your custom image. If you mark them as configurable, users will be able to provide values for the parameters at image deploy time, regardless of whether they provision the image using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
After you add the necessary bundles and specify installation and configuration data, you can save the image. Upon saving, the image status changes from Synchronized to Out of Sync.
Now you are ready to synchronize the image. To do this, simply click the synchronize icon. This will result in the creation of a virtual machine in the cloud envrionment (VMware or IBM Cloud) you defined in the selected cloud provider. The Image Construction and Composition Tool will then invoke the appropriate installation tasks (per the bundles you included in the image) within the running virtual machine. It will also copy over any configuration scripts you defined in the bundle.
After a while, the synchronization process completes, and the image returns to the Synchronized state. At this point, you are ready to capture the image by clicking the capture icon. This results in the creation of an OVA virtual image with your customizations. When the capture process completes, the image status changes to Deployable.
Once the image is in the deployable state, it is nearly ready to use. If you are using the IBM Cloud as your cloud provider, you can simply mark the image complete by clicking the complete icon. At this point, the image will show up in your private catalog on the IBM Cloud and it is ready to use. If you are using VMware as the cloud provider, you need to export the image. Click the export icon and provide information about an SCP-enabled server to which you want to export the image. Ideally, this location is directly reachable by the WebSphere CloudBurst or Tivoli Provisioning Manager environment into which you will import the image.
You can monitor the export status in a separate window by clicking on a link shown after clicking the OK button in the dialog above. When the export finishes, you are ready to import your new custom virtual image into WebSphere CloudBurst or Tivoli Provisioning Manager.
I hope the last three posts have given you a better idea of what the new IBM Image Construction and Composition Tool is all about. There will definitely be more to come about this tool in the near future, but in the meantime, if you have any questions or comments, please reach out to me. Until then, good luck and full speed ahead on your custom image compositions!
I hardly ever have a conversation about WebSphere CloudBurst, or generally cloud computing for application middleware, without the topic of databases coming up. Databases are such an important piece of nearly every application middleware environment, so users want to be sure that whatever they do for their application servers, they can also do for the databases on which their applications rely. That is why the capability to deploy DB2 from WebSphere CloudBurst has been around for as nearly as long as the capability to deploy WebSphere Application Server.
Even though DB2 deployment capability has been around for a while, there are still some common misconceptions regarding the offering. First, I have talked to a fair number of users who are under the impression that we only offer a trial version of DB2 for deployment via WebSphere CloudBurst. While that was true for the first few months of the offering, that is no longer the case. For several months now, a fully supported, 64 bit, production-ready DB2 image has been ready for use in WebSphere CloudBurst. If you were waiting for a DB2 image that you could go live with, wait no longer!
The other misconception, or rather, point of confusion, arises from the fact that the DB2 image for WebSphere CloudBurst is not, by name, a Hypervisor Edition image. I can assure you that is in name only. The DB2 image looks like and behaves like any other IBM Hypervisor Edition image once you load it into the appliance. You can use it to build and deploy patterns in the same way you use other images in WebSphere CloudBurst. You may just have trouble finding it if you search for 'DB2 Hypervisor Edition' as opposed to 'DB2 Server for WebSphere CloudBurst Appliance.'
Instead of going into further detail, I want to refer you to a blog entry from a fellow IBMer, Leon Katsnelson. Leon is a program director for DB2 and is responsible for the team that develops and delivers the DB2 image for WebSphere CloudBurst. In his most recent post, he provides a nice overview of the image and gives good information for those looking to use DB2 and WebSphere CloudBurst (there is also a bit on cloud computing at the beginning that I think is spot on). Check out Leon's post, and let us know what you think!
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
I hate sitting on secrets. I always have. I understand that sometimes it's in the best interest of everyone (and your job) to keep tight lips, but that does not make it any more fun. Inevitably, the run-up to our annual Impact conference means everyone in the lab is doing their fair share of secret keeping -- just waiting for announce time. For a lot of us, that day ended Tuesday with the announcement of the IBM Workload Deployer v3.0.
Now, you may be wondering, 'I have never heard of this. Why is it version 3.0??' Well, IBM Workload Deployer is a sort of evolution of the WebSphere CloudBurst Appliance, which was previously at version 2.0. This is good news for all of our current WebSphere CloudBurst users because all of the functionality (plus new bits of course) that they have been using in WebSphere CloudBurst are present in IBM Workload Deployer. You can use and customize our IBM Hypervisor Edition images in IBM Workload Deployer. You can build and deploy custom patterns that contain custom scripts in order to create highly customized IBM middleware environments. So, what's the big deal here? Two words: workload patterns.
Workload patterns represent a new cloud deployment model and are an evolution of the traditional topology patterns you may have seen with WebSphere CloudBurst Appliance (I am a little torn between evolution and revolution, but that's splitting hairs). Fundamentally, workload patterns raise the level of abstraction one notch higher than topology patterns and put the focus on the application. That means, when you use a workload pattern the focus is on the application instead of the application infrastructure. Perhaps an example would be helpful to illustrate how a workload pattern may work in IBM Workload Deployer.
Let's consider the use of a workload pattern that was part of the recent announcement, the IBM Workload Deployer Pattern for Web Applications v1.0. Just how might something like this work? It's simple really. You upload your application (maybe a WAR or EAR file), upload a database schema file (if you want to deploy a database with the solution), upload an LDIF file (if you want to setup an LDAP in the deployment to configure application security), attach policies that describe application requirements (autonomic scaling behavior, availability guidelines, etc), and hit the deploy button. IBM Workload Deployer handles setting up the necessary application middleware, installing and configuring applications, and then managing the resultant runtime in accordance with the policies you defined. In short, workload patterns provide a completely application centric approach to deploying environments to the cloud.
Now, if you are a middleware administrator, application developer, or just a keen observer, you probably have picked up on the fact that in order to deliver something as consumable and easy to use as what I described above, one must make a certain number of assumptions. You are right. Workload patterns encapsulate the installation, configuration, and integration of middleware, as well as the installation and configuration of applications that run on that middleware. Most of this is completely hidden from you, the user. This means you have less control over configuration and integration, but you also have significantly reduced labor and increased freedom/agility. You can concentrate on the development of the application and its components and let IBM Workload Deployer create and manage the infrastructure that services that application.
Having shown and lobbied a bit for the benefits of workload patterns, I also completely understand that sometimes you just need more control. That is not a problem in IBM Workload Deployer because as I said before, you can still create custom patterns, with custom scripts based on custom IBM Hypervisor Edition images. The bottom line is that the IBM Workload Deployer offers choice and flexibility. If your application profile meshes well with a workload pattern, by all means use it. If you need more control over configuration or more highly customized environments, look into IBM Hypervisor Edition images and topology patterns. They are both present in IBM Workload Deployer, and the choice is yours.
If you happen to be coming to IBM Impact next week, there will be much more information about IBM Workload Deployer. I encourage you to drop-by our sessions, ask questions, and take the opportunity to meet some of our IBM lab experts. Hope to see you in Las Vegas!
IBM Impact 2011 was a wildly busy week! Customer meetings, entertaining keynotes, informative sessions, and hands-on labs packed the 6 days with more than enough action. I spent a lot of the week presenting sessions and conducting labs for the newly announced IBM Workload Deployer. As one would expect with any new announcement, we got tons of questions about IBM Workload Deployer. While I cannot capture all the questions and their answers here, I will try to cover some of the more prevalent ones below.
Question: What happened to WebSphere CloudBurst?
Answer: The short answer is, it simply went through a rename. WebSphere CloudBurst became IBM Workload Deployer v3.0. The version 3.0 acknowledges this is an evolution of what we started with WebSphere CloudBurst, which was at version 2.0. Why remove WebSphere from the name? The fact that this is now an IBM branded offering is more accurate as it is capable of deploying and managing more than just WebSphere software.
Question: What is new in IBM Workload Deployer?
Answer: While there are many new features that I will be talking about over the coming months, the most prominent new facet is the introduction of workload patterns (also referred to as virtual application patterns). As opposed to topology patterns (traditionally referred to as simply patterns in the WebSphere CloudBurst product), workload patterns raise the level of abstraction to the application level. Instead of focusing on application infrastructure and its configuration as you do with topology patterns, workload patterns allow you to focus on the application and its requirements. When using workload patterns, you provide the application, attach policies that specify functional and non-functional requirements, and deploy. IBM Workload Deployer handles deploying and integration the middleware infrastructure necessary to support the application, and it automatically deploys your application on top of that middleware. In addition, IBM Workload Deployer manages the application runtime in accordance with the policies that you specify in order to provide capabilities such as runtime elasticity.
Question: If I am a current WebSphere CloudBurst user, what does this mean for me?
Answer: Not to worry. You will be able to use all of your WebSphere CloudBurst assets (patterns, scripts, images) in the new IBM Workload Deployer. All of the capabilities previously in WebSphere CloudBurst are present in IBM Workload Deployer (terminology may vary slightly -- topology pattern instead of just pattern for instance). Additionally, we continue to expand on the functionality that you are familiar with from WebSphere CloudBurst. This includes updates for Environment Profiles, new IBM Hypervisor Edition images, new pattern building capabilities, and more. Stay tuned for more information about these new features and for information on how you can move your WebSphere CloudBurst resources to the new IBM Workload Deployer.
Question: How do I choose between using workload and topology patterns?
Answer: There are a number of factors that will lead you to using either workload patterns, topology patterns, or both. The primary decision point will be how much control you really need (not want). When using workload patterns, you sacrifice some customization control over the configuration, integration, and administration of the middleware application environment since the workload pattern and management model abstracts away the 'guts' of the system. Everything about the workload pattern is application-centric. On the other hand, topology patterns give you intimate control over the configuration, integration, and administration of the middleware application environment. As a general rule of thumb, if your application requirements match the capabilities of a workload pattern, that is the way to go as it can greatly reduce complexity and cost associated with deployment and management. If a workload pattern does not meet the needs of your application, topology patterns can still greatly reduce cost and complexity and you can tailor them to fit almost any need. Beyond generalities, there is no hard and fast rule for choosing one over the other. It comes down to understanding your application environment and its needs.
Question: Is IBM Workload Deployer an appliance like WebSphere CloudBurst?
Answer: Yes, it is still an appliance, but an updated one! The new appliance is 2U, and it provides more storage, processing power, and memory. It is still just as easy to setup, but just slightly bigger.
Well, that is all for now, but I will be back many times over the coming months with more information. In the meantime, if you have any questions, please leave them in a comment below.
Jason McGee will be leading the second GWC Lab Chat this week on Wednesday, 4/20. The very timely topic is related to recent announcements from IBM regarding the IBM Workload Deployer (see previous posts). Entitled "Application-Centric Cloud Computing" the discussion will focus on the concept of deploying and managing your application workloads in a shared, self-managed environment rather than manually creating and managing the application middleware topologies. It places the focus on the application rather than the infrastructure. This concept promises to deliver greater simplicity, elasticity, and
density among other things. It can position your business to react more
quickly and efficiently to the increasing demands of your customers and
free you from the managing all of the details.
Many of you may have already heard Jason speak last week at IMPACT 2011 in the cloud mini main tent or perhaps at any number of other sessions that Jason was involved in. Jason is the key architect behind IBM's WebSphere cloud activities. Obviously, Jason understands the cloud space very well and has a clear view of the evolution into Application-Centric Cloud Computing. This GWC Lab Chat will provide the opportunity to get your questions answered and share your perspective on this technology.
Jason will provide a brief introduction to the concepts and ideas and then lead an open discussion. Put it on your calendar and plan to attend - and please plan to bring your questions and comments to help foster a rich discussion. We want to hear from you.
If you haven't registered yet it is not too late - learn more and register here. It is easy to register and there is no cost. This is a very timely event and a great way to dig a little more deeply into concepts you first heard at IMPACT or perhaps hear them for the first time. Don't miss it!
When one uses IBM Workload Deployer (previously WebSphere CloudBurst) to deploy a virtual system pattern, they benefit from a completely automated deployment process. The automation includes the creation and placement of virtual machines, injection of IP addresses, initiation of internal processes, and invocation of included scripts. Most of these processes are straightforward and require little more than a brief overview. However, the placement of virtual machines stands out, and it's inner workings are the subject of quite a few questions when I discuss the appliance. With that in mind, I thought I would provide a little more information on how the placement algorithm in IBM Workload Deployer works.
The placement subsystem in IBM Workload Deployer considers three primary elements: compute resource, availability, and license optimization. Compute resource availability is the gating factor for placement. That means that IBM Workload Deployer first looks at the available CPU, memory, and storage resource in the collection of hypervisors making up the cloud group(s) you are targeting for deployment. If a particular hypervisor cannot provide enough resource based on the amount you requested for your deployment, then it is automatically taken out of the eligible hosts pool. It is important to note that IBM Workload Deployer will overcommit CPU, and it will overcommit storage if you direct it to do so. It will not overcommit memory because that could severely degrade the performance of the application(s) running in the virtual machines.
After choosing the pool of hypervisors that are capable of hosting the virtual machines in your deployment from a compute resource perspective, the appliance then considers high availability. To better understand this particular placement stage, let's consider an example. Consider you are deploying a pattern based on WebSphere Application Server Hypervisor Edition and it contains two custom node parts. It is conceivable, and in fact likely, that these two custom node parts will host members of the same cluster, and thus the two nodes will support the same applications. As such, IBM Workload Deployer will attempt to place the two custom nodes on different physical machines in order to prevent a single point of failure. Of course, this depends on having two hypervisors with enough resource (CPU, memory, storage) to host the virtual machines, but the appliance makes that decision in the first placement stage.
After considering compute resource and high availability, IBM Workload Deployer moves to the last stage of placement: license optimization. In this stage, the placement subsystem attempts to place the virtual machines on hypervisors in a way that minimizes the licensing cost to you. The appliance can do this because it is aware of IBM virtualization licensing rules and takes those into account during this stage (if you aren't familiar with virtualization licensing rules and you are curious, ask you're sales representative to explain some time). During this stage, it will not violate any resource overcommit directives or rules in place, nor will it compromise system availability, but it will seek to minimize costs within these parameters.
At this point, I should make something clear that may already have occurred to you. You can override most of these placement rules by creating a cloud group containing only one hypervisor. In this case, IBM Workload Deployer will put all virtual machines on the single hypervisor until it runs out of compute resource (memory is likely to be the constraining factor). I would not suggest that you do this unless you have a good reason or you are in a simple pilot phase, but I do like to point out the art of the possible!
While not incredibly deep from a technical perspective, I do hope that this provided a few helpful details on what goes on during the placement stages of deployment. If you have any questions, do let me know.
Application-centric cloud computing is the main thrust behind the new capabilities of IBM Workload Deployer v3.0. But what does that really mean? After all, application-centricity is really just a concept. Granted, it is an important concept, but it is fairly meaningless until it is put into action or implemented. IBM Workload Deployer does just that with its new Virtual Application Patterns (VAPs).
VAPs are the embodiment of the workload pattern approach I briefly discussed in an overview post a few weeks back. The idea with a VAP is to give the user an interface through which they can provide their application, specify dependencies, declare functional and non-functional requirements and then deploy. Of course application middleware is a part of the overall solution, but IBM Workload Deployer has the smarts to build, configure, and integrate the necessary infrastructure in order to support the user's application. This is completely hidden from the user, so they are liberated to focus on the application and its requirements.
If we scratch a bit further beneath the surface of a VAP, we see that these patterns contain three primary pieces. These primary pieces are components, links, and policies, and they are fundamental to understanding how virtual application patterns work. Let's start with the building blocks of VAPs, components. Put simply, components represent different resources and functionality profiles that make up your application environment. As an example, the IBM Workload Deployer Pattern for Web Applications is a VAP that contains components for an EAR file, WAR file, message queue, and any number of other components that are typical requirements for a web application. The components will certainly vary based on the workload type (i.e. the components included in a web application VAP would be different than those included in a batch application VAP), but they are the foundation of any VAP.
From the ground up, the next logical element we come to in the VAP is a link. A link is a way to declare a dependency or integration point between two components. As an example, consider a VAP with a WAR file component and a database component. You might draw a link between the WAR component and the database component to indicate that your web application uses or otherwise depends on the database. IBM Workload Deployer interprets this link, and takes it as a directive to configure the integration between the two components as a part of deployment. In this case, that may mean configuring a data source in the application's container. This is just a simple example, and an application may have any number of links between components.
Finally, we come to the policy element within the VAP. A policy is a way for a user to specify functional and non-functional requirements for their application environment. Users attach policies to the VAP, or to components in their VAP, and IBM Workload Deployer interprets and enforces those policies. In the context of a web application, one example of a policy could be a scaling policy. The scaling policy might indicate scaling requirements for the application that included minimum application instances, maximum application instances, and conditions that triggered scaling activities. IBM Workload Deployer would use the information in a scaling policy within a VAP to appropriately manage the deployed, running environment. Other examples of a scaling policy may include a JVM policy that provides configuration directives for the java virtual machines in your application environment or a logging policy that defines logging configuration options. In any case, the policy element allows VAP builders to influence the configuration and management of the application environment.
In the example VAP below you can see the use of components (Enterprise Application, Database, User Registry, Messaging Service), links (blue lines between components), and policies (Scaling Policy, JVM Policy):
In total, when I look at a VAP a particular word sticks out to me: declarative. VAPs really enable declarative, application-centric cloud computing. What do I mean? By declarative, I mean you are telling IBM Workload Deployer what you want, but not necessarily how you want it done. It is the job of IBM Workload Deployer to take care of the how. This shift in approach to application environments enables the potential for significant savings, and more importantly to me, lays the foundation for a more agile, flexible approach to deploying and managing application environments.
There will be more in the weeks and months to come on IBM Workload Deployer, so stay tuned. I also want to put a plug in for a new blog from Jason McGee. For those that do not know Jason, he is an IBM Distinguished Engineer, and the lead architect behind IBM Workload Deployer. Be sure to check out his blog for insights on this new offering, as well as for all things cloud.
One of the fundamental tenants of IBM Workload Deployer is a choice of cloud deployment models. Starting in v3.0, users will be able to deploy to the cloud using virtual appliances (OVA files), virtual system patterns, or virtual application patterns. The ability to provision plain virtual appliances is a way to rapidly bring your own images, as they currently exist, into the provisioning realm of the appliance. As such, I think the use cases and basis for deciding to use this deployment model are fairly evident. However, when comparing the two patterns-based approaches, virtual system patterns and virtual application patterns, the decision requires a bit more scrutiny.
Our pattern approach is a good thing for you, the user. Basically, when we refer to patterns in the context of cloud, we are referring to the encapsulation of installation, configuration, and integration activities that make deploying and managing environments in a cloud much easier. Regardless of what kind of pattern you end up using, you benefit from treating a potentially complex middleware infrastructure environment or middleware application as a single atomic unit throughout its lifecycle (creation, deployment, and management). In turn, you benefit from decreased costs (administrative and operational) and increased agility via rapid, meaningful deployments of your environments. That said, it is imperative to understand the differences between virtual system and virtual application patterns, and more importantly, it is important to understand what those differences mean to you. Let's start by considering the admittedly simple 'Cloud Tradeoff' continuum below.
In the above graph, the X-axis represents the degree to which you have customization control over the resultant environment. The degree of control gets lower as we move from left to right. The left Y-axis represents total cost of ownership (TCO), which decreases as we move up the axis. The right Y-axis represents time to value, which similarly decreases as we go up the axis. Naturally, enterprises want to move up the Y-axis, but, and it can be quite a big but, they are sometimes hesitant to relinquish much control (move to the right on the X-axis) in order to do so. In that light, I think it helps to explore our two patterns-based approaches a bit more.
The most important thing to understand about this continuum is that the X-axis really represents the customization control ability from the point of view of the deployer and consumer of the environment. An example is probably the best way to explain. Let's consider a fairly simple web service application that we want to deploy to the cloud. If we were to use a virtual system pattern to achieve this, we would probably start by using parts from the WebSphere Application Server Hypervisor Edition image to layout our topology. We may have a deployment manager, two custom nodes, and a web server. After establishing the topology, we would add custom script packages to install the web service application and then configure any resources the application depended on. Users that wanted to deploy the virtual system pattern would access it, provide configuration details such as the WAS cell name, node names, virtual resource allocation, and custom script parameters, and then deploy. Once deployed, users could access the environment and middleware infrastructure as they always have. That means they could run administrative scripts, access the administrative console provided by the deployed middleware software, and any other thing one would normally do. The difference in using virtual system patterns is not necessarily the operational model for deployed environments (though IBM Workload Deployer makes some things, like patching environments, much easier). Instead, the difference is primarily in the delivery model for these environments.
Using a virtual application pattern to support the same web service application results in a markedly different experience from both a deployment and management standpoint. In using this approach, a user would start by selecting a suitable virtual application pattern based on the application type. This may be one shipped by IBM, such as the IBM Workload Deployer Pattern for Web Applications, or it may be one created by the user through the extensibility mechanisms built into the appliance. After selecting the appropriate pattern, a user would supply the web service application, define functional and non-functional requirements for the application via policies, and then deploy. The virtual application pattern and IBM Workload Deployer provide the knowledge necessary to install, configure, and integrate the middleware infrastructure and the application itself. Once deployed, a user manages the resultant application environment through a radically simplified lens provided by IBM Workload Deployer. It provides monitoring and ongoing management of the environment in a context appropriate for the application. This means that there are typically no administrative consoles (as in the case of the virtual application pattern IBM ships), and users can only alter well-defined facets of the environment. It is a substantial shift in the mindset of deploying and managing middleware applications.
Okay, with that explanation in the bag, let's revisit the diagram I inserted above. I hope it's clear that, all things being equal, virtual application patterns indeed provide the lowest TCO and shortest TTV because of the degree to which they encapsulate the steps involved in setting up complex middleware application environments. So, let's get back to my assertion that the customization control continuum really applies to the deployer and consumer. Why do I say that? It's simple. In the case of either the virtual system pattern or the virtual application pattern, the pattern composer has quite a bit of liberty in how they construct things. Sure, we enable you right out of the chute by shipping pre-built, pre-configured IBM Hypervisor Edition images, as well as pre-built virtual system and virtual application patterns. The key is though, that the IBM Workload Deployer's design and architecture also enables you to build your own patterns -- be they the virtual system or virtual application type. With anywhere from a little to a lot of work, you can build virtual system and virtual application patterns tailored to your use cases and needs.
At this point, you may be saying, "Well now you have really confused things! How am I supposed to decide what kind of patterns-based approach fits my needs?" I have some advice in that regard. First, map your needs to things that we enable with the assets you get right out of the box with IBM Workload Deployer. If your application fits into the functional scope of one of the virtual application patterns that we ship, use it. If you can support the application by using IBM Hypervisor Edition images, virtual system patterns, and custom scripts, do it. In this way, you benefit most from the value offered by IBM Workload Deployer. However, if you find that you cannot use any of the assets we provide right out of the box (e.g. you want to deploy your environment on software not offered in IBM Hypervisor Edition form or in a virtual application pattern), then ask yourself one simple question: "What do I want my user's experience to be?"
In this sense, I primarily mean a user to be a deployer or consumer of your patterns. You need to decide whether you favor the middleware infrastructure centric approach afforded by virtual system patterns, or if you prefer the application centric approach proffered by virtual application patterns. There is no way to answer this generically for all potential IBM Workload Deployer users. Instead, you have to look at your use case, understand what's available to help you accomplish that use case, and finally, decide on what you want your user's experience to be. I hope this helps!
WebSphere configuration management practices are common items of conversation that comes up when I am talking with users about IBM Workload Deployer (formerly WebSphere CloudBurst). This conversation can take on so many different avenues that it is hard to capture all of them in a short blog post. So, for the sake of this post, let's consider two facets of WebSphere configuration management. The first facet is addressing the need to consistently arrive at the same configuration across multiple deployments of a given WebSphere environment. The second facet involves managing the configuration of a deployed environment over time to protect against living drift. What is the best way to tackle these two challenges? Well, it comes down to picking the right tool for the job.
When it comes to ensuring consistency of initial WebSphere configuration from deployment to deployment, there is really no better means than patterns-based deployments enabled by IBM Workload Deployer. Whether you are using a virtual system or virtual application pattern, the bottom line is that you are representing your middleware application environments as a single, directly deployable unit. When you need to stand that environment up, you simply deploy the pattern. The deployment encapsulates the installation, configuration, and integration of the environment, and your applications if you so choose. The benefit of this approach is that once you get your pattern nailed down, you can be extremely confident that the initial configuration of your environments is extremely consistent from deploy to deploy. Basically, no more bad deployments because someone forgot to run configuration step 33 out of 100!
Because we talk about the benefits of consistency provided by our IBM Workload Deployer patterns, users often ask what IBM Workload Deployer does in terms of configuration governance for deployed environments. In other words, they ask how IBM Workload Deployer helps them to track configuration changes or compare the configuration of a deployed environment to a known good one. The honest answer is that this is a bit beyond the functional domain of the appliance. While IBM Workload Deployer does allow you to manage the deployed environment (apply fixes, update deployed applications, snapshot, etc.), it does not layer some of the common configuration governance concerns on top of that. However, there is a good reason why the appliance does not focus on that. It's because Rational Automation Framework for WebSphere does!
If you find yourself wanting to actively track configuration changes, periodically (and automatically at specified intervals) compare configuration changes to a 'golden' baseline, import configurations of a known good environment, apply common configuration across a number of cells, then the capabilities of RAFW would likely be of interest to you. It can do all this and give you an incredible toolbox of out-of-the-box application deployment and configuration capabilities for WebSphere environments. In my mind, for those that spend a good deal of time dealing with WebSphere configuration, whether it be deploying applications, configuring containers, or debugging inadvertent changes, an examination of RAFW functionality is a must.
Now it is time for a bit of disclaimer/clarification. I am not suggesting that you pick one or the other when it comes to IBM Workload Deployer and RAFW. In fact, there are many scenarios where 1+1=3 with these two solutions, and I have written about it many, many times (including this article). That said, I think it is important to highlight the relative strengths of each product, so that it is easier to map it back to your pain points. In honesty, many of the users I talk with have challenges in getting the initial configuration right AND managing it over time. That kind of problem beckons for the integrated IBM Workload Deployer/RAFW solution.
Of course, technology only gets you so far when it comes to these kinds of problems. It would be disingenuous of me to suggest otherwise. It has always been and will continue to be important to establish clear and rigorous processes around the way you deploy, manage, and change environments. This just gives you an idea of some of the tools you can leverage to aid in the implementation of those processes.
More and more, I am getting a question about how to bring existing WebSphere environments into IBM Workload Deployer. While "bringing in an environment" can mean any number of things, let's take it to mean that a user wants to import their existing WebSphere cells, applications, and configuration into IBM Workload Deployer as a pattern they can subsequently deploy. While there may not be a big red easy button in the appliance that lets you point to an existing environment and import it, there are a couple of techniques that one can employ. I have covered both techniques before, but since I'm getting the question with increasing frequency, I felt like it was time for recap.
The first option is to use a combination of IBM Workload Deployer and Rational Automation Framework for WebSphere. This is a use case I have spoken about numerous times at conferences and in blog posts and articles. In fact, you can read a little about it here. In this sense, RAFW provides excellent capabilities to point at an existing cell, and import everything about it. This includes WebSphere configuration, applications, shared libraries, and more. Once imported as a RAFW project, you can use the IBM Workload Deployer integration script package provided by RAFW to replay that configuration on top of deployments created by the appliance.
The second option is something I talk about a little less frequently. This option revolves around the use of a sample script (provided for free in our samples gallery) that you can run against existing WebSphere cells. The invocation of this script produces IBM Workload Deployer script packages that you can use in patterns to apply the configuration of the target cell to your new cloud-based deployments. Under the covers the utility script and resultant script packages use backupConfig and restoreConfig respectively. They do ensure the update of the cell, node, and host names during the restoreConfig execution (which happens automatically during pattern deployment). Beyond that, the use of the script is subject to the same limitations and rules in place for the use of the backupConfig and restoreConfig commands. You can read more about this capability, watch it in action, and download it for free.
I hope this is all useful information for those of you looking for ways to import existing environments into IBM Workload Deployer as patterns. If you have any questions, please let me know!
As I have mentioned before, IBM Workload Deployer v3.0 introduces choices in pattern-based deployment models. One of those models, virtual system patterns, is a carry over from the WebSphere CloudBurst Appliance. When you use virtual system patterns in IBM Workload Deployer, you can take advantage of all of the techniques you put to use in WebSphere CloudBurst. This is certainly good news for current WebSphere CloudBurst users, but it goes a bit further. Instead of simply maintaining the status quo with virtual system patterns, which would have been reasonable considering the introduction of virtual application patterns, we chose to continue to expand on your customization options for this pattern deployment model. In particular, I want to discuss three new features in IBM Workload Deployer that may help you to better construct and manage virtual system patterns.
The first new feature is one that I have been eagerly awaiting. In the new version of the appliance, we provide you with the ability to specify part and script package ordering in your pattern. This means that, within the virtual system pattern editor, you can tell IBM Workload Deployer in which order to start the virtual machines in your pattern, and you can specify in which order to invoke the script packages within the pattern during deployment. This eliminates the need for special script invocation orchestration logic in your pattern (I had customers resorting to a semaphore like approach using a shared file system), and it allows you to be more declarative about the virtual machine bring-up process. There are constraints, specifically with the part ordering. Some images will impose an implied part start-up order that you cannot change. For instance, deployment manager parts in the WebSphere Application Server Hypervisor Edition image must start before custom node parts. The good news is the pattern editor will not allow you to specify a part start-up order that violates these constraints. The image below shows an example of the ordering view in the virtual system pattern editor.
Another new feature that may influence the way you build virtual system patterns is the introduction of Add-Ons. You can think of Add-Ons as special script packages that you can include in your virtual system pattern that perform system-level configuration actions. Specifically, you can include add-ons in your virtual system pattern to add an operating system user, add a virtual disk, or add a NIC during the deployment process. You include Add-Ons in your pattern by simply dragging and dropping them onto a part in your pattern, just as you do with script packages today. The difference between script packages and Add-Ons is that IBM Workload Deployer will ensure the invocation of all Add-Ons before any other scripts run during deployment. We include default Add-On implementations for adding a user, disk, and NIC.
The last new feature I want to talk about today has more to do with how you manage or govern the deployment of virtual system patterns. In WebSphere CloudBurst 2.0, we introduced the idea of Environment Profiles as a way to extend your customization reach into the deployment process. Initially, these profiles gave you the ability to directly assign IP addresses to virtual machines in your deployment, declaratively specify virtual machine naming formats, and easily split a single pattern deployment across multiple cloud groups. In IBM Workload Deployer, you will be able to use these same profiles to set resource consumption limits for pattern deployments. In particular, you will be able to set cumulative limits for virtual CPU, memory, storage, and software licenses used by deployments tied to a specific profile, thereby giving you finer-grained control over cloud resource consumption. The picture below shows the new resource limit aspects of environment profiles.
Virtual system patterns are key in the deployment model choices for IBM Workload Deployer. Not only did we carry the concept over from WebSphere CloudBurst to IBM Workload Deployer, but we made it even better. Expect this trend to continue!
The soon to be released IBM Workload Deployer is already being integrated with many IBM products. One of these is the Rational Application Developer. I created a short video demonstration of a simple scenario that includes multiple phases of an application from development to production using IBM Workload Deployer. The scenario starts with the Solutions Architect creating a workload application pattern for a stock trading application. It then moves to the developer working in Rational Application Developer and demonstrates this integration that allows the developer to access the workload pattern, publish the application that she has built in Rational Application Developer into the pattern, and then deploy the pattern to the test cloud. All of this without leaving the Rational Application Developer user interface. The scenario then continues with the test team adding policies and validating the application before the deployment manager finally makes some final adjustments and adds places the application into the production cloud.
Among the major features of the new virtual application pattern in IBM Workload Deployer is the notion of elasticity. That is, as your application needs more resources, it gets them. When your application can meet its SLAs with fewer resources, the environment shrinks. With this kind of pattern, you enable elasticity by specifying a policy and defining the scaling trigger (i.e. CPU usage, application response times, database response times, etc.). What may have been a bit lost in some of these new announcements regarding IBM Workload Deployer is the fact that you can now leverage this core feature of cloud, elasticity, in your virtual system patterns.
If you have read this blog in the past, you probably already know that the Intelligent Management Pack is an option for virtual system patterns built using WebSphere Application Server Hypervisor Edition. When you enable the Intelligent Management Pack option, you are essentially building and deploying WebSphere Virtual Enterprise (WVE) environments. For those of you not familiar with WVE, the best way to describe it is that it provides you with application and application infrastructure virtualization capabilities. Of its many capabilities, one most germane to our discussion today is the ability for users to attach SLAs to applications and then have WVE automatically prioritize requests and manage resources in order to meet those SLAs. Inherent in this capability is the ability to dynamically start and stop application server processes (JVMs) as required. In other words, WVE provides JVM elasticity.
The fact that WVE provides JVM elasticity is nothing new. Further, IBM Workload Deployer started providing virtual machine (VM) elasticity in previous versions (when it was WebSphere CloudBurst). With this feature, you could add or remove VMs to an already deployed virtual system using dynamic virtual machine operations provided by the appliance. The catch was that the VM elasticity was a manual action and you could not link this elasticity to the same SLAs tied to your applications. Well, thanks to a new feature in WebSphere Virtual Enterprise and easy integration provided by the Intelligent Management Pack, this is no longer the case.
Starting in IBM Workload Deployer 3.0, you can take advantage of a new WVE feature called Elasticity Mode when using the Intelligent Management Pack. Elasticity mode is not unique to IBM Workload Deployer, but a concept new to the base WVE product. It allows one to define actions for how WVE should grow and shrink the set of nodes used by application server resources. Like the basic JVM elasticity capability in WVE, these node elasticity actions trigger based on SLAs tied to your applications. Consider the case that you are using elasticity mode and your application is not currently meetings its SLA. If WVE does not think it can start any more application server instances on the current set of nodes, it will grow the set of nodes per your elasticity configuration. Conversely, if WVE detects that it can meet SLAs with fewer nodes, it will shrink the resources per your elasticity configuration.
In IBM Workload Deployer, using elasticity mode becomes even easier. All you need to do is use the Intelligent Management Pack and enable the elasticity mode option in your virtual system patterns. When you do this, you get automatic integration between IBM Workload Deployer and the deployed WVE environment. What does that mean? It means that if WVE detects it needs more nodes, it will automatically call back into IBM Workload Deployer and request that the appliance provision a new VM that will serve as a node for application server processes. It also means that if WVE detects it could meet SLAs with fewer resources, it will call into IBM Workload Deployer and ask it to remove a node. All of this happens without any user scripting. All you have to do is enable this option in your patterns and configure SLAs appropriate for your applications.
To me, this exciting new feature brings out the best of elasticity capabilities in both IBM Workload Deployer and WebSphere Virtual Enterprise. The result is a single management plane that gives you both VM and JVM elasticity for your cloud-based application environments. Best of all, elasticity actions map directly to SLAs for your applications. After all, when it comes to cloud, it's the application that really matters!
I just wanted to point out a great opportunity for anybody considering leveraging IBM Workload Deployer v3 to deploy Database workloads. On June 29th Rav Ahuja, a Senior Product Manager for Data Management at IBM, will be hosting a webcast entitled "Easily Deploying Private Clouds for Database Workloads". He will be joined by Chris Gruber (Product Manager, Database as a Service), Leon Katsnelson (Program Director, IM Cloud Computing Center of Competence), and Sal Vella (Vice President, Database Development and Warehousing) in this panel discussion.
As many of you already know, IBM Workload Deployer v3 comes pre-loaded with DB2 images and patterns that are configured to rapidly provision standardized database servers for any number of purposes. The servers can be deployed in standalone configurations or as part of a complete virtual system including web components with the database components. These servers can also be configured for high availability scenarios. This panel discussion will cover all of these scenarios and more.
You can read more about the webcast in this blog post by Rav Ahuja.
If you want further details about how to build and rapidly deploy databases in a private cloud, be sure to attend this free webinar on June 29th.
We've been talking a lot about IBM Workload Deployer V3 and we will continue to highlight different aspects of the capabilities it provides in the coming weeks. As we've already mentioned - IBM® Workload Deployer V3 is not just another release of the IBM WebSphere CloudBurst Appliance. While it builds on WebSphere CloudBurst's success, and supports and improves upon all of its original capabilities, Workload Deployer provides new application-centric computing capabilities for your private cloud, and brings you higher utilization, improved ease of use, and more rapid application deployment.
In my opinion, declarative deployment models are key to the entire notion of Platform as a Service (PaaS). That is, users should concern themselves with what they want, but not necessarily how to get it. The PaaS system should be able to interpret imperatives from the user and automatically convert that to a running system. In this respect, I think the new virtual application pattern, and more specifically policies, in IBM Workload Deployer takes a giant leap toward a more declarative deployment model.
In IBM Workload Deployer, policies allow you to 'decorate' your virtual application pattern with functional and non-functional requirements. In other words, they provide a vehicle for you to tell the system what qualities of service you expect for your application environment. To put a little context around this discussion, let's examine the policies available in the virtual application pattern for web applications. Specifically, let's look at the four policy types you can attach to Enterprise Application, Web Application, and OSGI Application components in this pattern:
Scaling policy: When it comes to cloud, the first thing many folks think about is autonomic elasticity. Applications should scale up and down based on criteria defined by the user. Well, that is exactly what the scaling policy lets you do. You simply attach this policy to your application component, and then specify properties that define when to scale. First, you choose a scaling trigger from a list that includes application response time, CPU usage, JDBC connection wait time, and JDBC connection pool usage. After choosing your trigger, you decide the minimum and maximum number of application instances for your deployment, and then you choose the minimum number of seconds to wait for an add or remove action. At this point, you can deploy your application and IBM Workload Deployer will monitor the environment, automatically triggering scaling actions as needed.
JVM policy: I would be willing to bet that nearly all of you tune the JVM environment into which you deploy your applications. The JVM policy allows you to take two common tuning actions, setting the JVM heap sizes and passing in JVM arguments, as well as attach a debugger to the Java process (especially useful in development and test phases). You can also use the policy to enable verbose garbage collection (invaluable to understanding heap usage patterns for your application) and select the bit level (from 32 or 64) for your application. Again, all you have to do is attach the policy and specify the properties. IBM Workload Deployer will take care of the required configuration updates.
Routing policy: The routing policy provides a simple way to specify virtual hostnames and allowable protocols (HTTP or HTTPS) for your application. Attach the policy, provide the virtual hostname you want to use, select the desired protocols, and that's it! Remember, once you set the virtual hostname you will need to update your name server to map the hostname to the appropriate IP address.
Log policy: During the development and test phase, it is likely that you will want to enable certain trace strings in the application runtime. The log policy allows you to provide trace strings for your application, and it makes sure that the appropriate configuration updates occur in the deployed environment.
While this is not an exhaustive explanation of each of the policies above, I hope it gives you a basic idea of what they are and how to use them. To me, declarative deployment models are going to be a crucial part of making PaaS successful, so I am really excited about the notion of policies in IBM Workload Deployer. What do you think?
A few weeks ago, I had a conversation with a current WebSphere customer about the potential value they could derive from the use of IBM Workload Deployer. Right away, this customer saw value in the consistency that a patterns-based approach could afford them. It was clear that patterns eliminate the uncertainty that can make its way into even the best-planned deployment processes. Initially though, the customer questioned the value of being able to do fast deployments because, in their words, "We don't deploy WebSphere environments that often." So, we continued our discussion, and then they asked an important question that I encourage all of our users to ask: "Why don't we deploy our WebSphere environments more frequently?"
It is interesting to talk with our WebSphere users that have a long history with our products. Often times, they have been taking a shared approach to WebSphere installations for many, many years. They develop innovative approaches and isolation schemes that allow them to carve up a single WebSphere installation (cell) amongst multiple different application teams. This allows them to avoid having to setup a cell for each application deployment and saves them the associated time. However, having talked to many different users taking this approach, it is not without its challenges.
As was the case in the customer I mention above, users typically made trade-offs when electing for larger, shared cells. As an example, if you have multiple different application teams with different types of applications using a single cell, applying fixes and upgrades to that cell can be a lot more complex. After all, you now have to coordinate plans across a number of different teams and find a window that fits all of their needs. For the same reason, trying incremental function via our feature packs is much more arduous in these types of cells. Additionally, administrative controls become more complex since teams with varying needs all require administrative access. Admittedly, this gets simpler with newer fine-grained security models in WebSphere Application Server v7 and v8, but it still requires organizational discipline and process.
At this point I should be clear that I am not denigrating the shared cell approach. It can work well, and we have many facilities built into the WebSphere Application Server product to support that model. However, if you are using this approach and you find yourself stumbling too much for your own liking, then I would strongly suggest that you explore the patterns-based approach of IBM Workload Deployer. By deploying patterns that represent your WebSphere cells using IBM Workload Deployer, you can quickly and consistently setup multiple WebSphere Application Server cells to support the varying needs of your application teams. You will still avoid spending an inordinate amount of time installing and configuring cells as that is an automated part of pattern deployment, and your application teams will still get the resources they need. Further, this can liberate your application teams in terms of how they apply maintenance, install upgrades, and absorb new function in the form of feature packs.
I am not suggesting a complete pendulum swing in your approach to how you manage multiple application environments. There is definitely a happy medium in terms of how many cells you end up with. After all, you do not want to trade in one set of problems for the problem of managing way too many different cells. However, I do think that decomposing monolithic, multi-purpose cells into smaller, more purposeful cells can be beneficial. In the course of thinking about this different approach, you may come to the same conclusion that the customer I mention above did. IBM Workload Deployer's rapid deployment capabilities are indeed valuable if you take a slightly different view of current processes.
If you are reading this blog then I am pretty sure that you are interested in the agility that can be achieved by rapidly provisioning middleware systems and standing up virtual applications in a private cloud environment. However there are other aspects of agility that you should also consider. One such aspect is the ability to build applications that can be easily maintained, updated, and extended. This is where OSGi technology comes into the picture.
If you have been working with the IBM Workload Deployer (or watching some IBM Workload Deployer demos) you may have noticed a category of components in the virtual application builder called OSGi Components.
Maybe you already know all about OSGi applications and the value they bring to an enterprise. Or, perhaps you noticed this and decided that you would search for some more information on this odd acronym and just what an OSGi application is all about.
In a nutshell OSGi technology is a way to define dynamic modules for Java. It provides a standard way to encapsulate components (called bundles) with metadata that define versioned package dependencies, service dependencies, packages exported, services exported, etc... basically everything you need to know about this bundle so that it can be connected up with other bundles to support a particular solution. These bundles can then be grouped together into applications and dynamically wired to fulfill necessary dependencies at runtime. The OSGi framework provides all of the necessary capability to manage the dependencies and resolve any problems.
Those who leverage OSGi technology benefit from improved time-to-market and reduced development costs. The loose coupling provided by the OSGi framework reduces maintenance costs and facilitates the dynamic delivery of components in a running system. Of course there's a lot more to it than just that ... involving portability across different environments, achieving the appropriate level of isolation or sharing within an environment, and integrating with the many different technologies and patterns already available today. I don't think I know enough about OSGi to do it justice here. But fortunately for me (and you) there are several experts who can make it all clear.
One such expert is Graham Charters and there is a great opportunity to hear him introduce this topic and also participate in a dialogue about the concepts and what they mean for your business. Graham will be leading a Global WebSphere Community Lab Chat on Wednesday of this week (July 20th) entitled: How can OSGi make your enterprise more agile. Graham is the IBM technical lead in the OSGi Alliance Enterprise Expert Group and an active participant in the open source community implementing many of these standards. So register now for this free session and learn how OSGi can make your enterprise even more agile.
When it comes to IBM Workload Deployer, I have no illusions concerning our competitors. They are out there, and they are constantly on the attack. Their dubious claims aside, I know this because I still get asked quite frequently to explain the benefits of IBM Workload Deployer versus some other general purpose cloud provisioning and management solution. So, while I have done that many times in various forums, I figured it was time to address the subject here on the blog.
When comparing IBM Workload Deployer to the other available solutions, I honestly feel comfortable saying we have no direct competition. I know you believe me to be biased, and rightly so, but let me explain why I think the competition is much more perception than reality. To do this, I want to focus on the patterns-based approach that IBM Workload Deployer takes to cloud provisioning and management.
Let's start with virtual system patterns in IBM Workload Deployer. Virtual system patterns allow you to build and deploy completely configured and integrated middleware environments as a single unit. These patterns build on top of our special IBM Hypervisor Edition images that bottle up the installation and quite a bit of the configuration of the underlying middleware products. Further, when using virtual system patterns, IBM Workload Deployer manages and automates the orchestration of the integration tasks that need to happen to setup a meaningful middleware environment. For instance, when deploying WebSphere Application Server you do not need to do anything on your end to deploy a clustered, highly available environment. When deploying WebSphere Process Server in this manner, you do not need to take any administrative actions to produce a golden topology. You just deploy patterns and the images, patterns, and appliance take care of the rest. Of course, you can add your own customizations and tweaks in the pattern, but we take care of the common administrative actions that would otherwise require your care.
I am not sure of a better way to say it, so I will be blunt: When deploying products delivered in IBM Hypervisor Edition form, no other solution compares to the virtual system pattern capability offered by IBM Workload Deployer. It is not even close. Can you provision products like WebSphere Application Server or WebSphere Portal using other cloud provisioning tools? Sure, but you should be aware that you will be writing and maintaining your own installation, configuration, and integration scripts. It is also likely that you will end up developing a custom interface through which deployers request your services (something not necessary when using the slick IBM Workload Deployer UI). All of this takes time, resource, and money. More importantly, this is not differentiating work and distracts from the real end goal: serving up applications. IBM Workload Deployer can deliver this operational capability right out of the box, and it can do so in a way that costs less than custom developed and maintained solutions.
When considering IBM Workload Deployer versus the competition, it is also important to consider the new virtual application pattern capability delivered in version 3.0. The virtual application pattern capability is a testament to IBM's thought leadership in and commitment to cloud computing for middleware application environments. Virtual application patterns take a bold step forward in raising the level of abstraction beyond the middleware environment and up to the most important resource in enterprise environments: the application. With a virtual application pattern, you simply provide your application and specify both functional and non-functional requirements for that application. When ready, you deploy that pattern, and IBM Workload Deployer sets up the necessary middleware infrastructure and deploys the provided application. Moreover, the appliance will monitor and autonomically manage the environment (i.e. scale it up and down) based on the policies you specify. Quite simply, this is a deployment and management capability our competition cannot match.
There is more to consider than just patterns though. The appliance makes it really simple to apply maintenance and upgrades to environments running in your cloud. It can autonomically manage your deployed environments (through policies in virtual application patterns and the Intelligent Management Pack for virtual system patterns), and it effectively abstracts the underlying infrastructure of your cloud environment. This abstraction is the reason IBM Workload Deployer can deploy your environments to PowerVM, zVM, and VMware environments. It also makes it easy to deploy the same environment to multiple different underlying platforms, thus accommodating typical platform changes that happen as an application moves from development to production. The best part of all is that the deployer’s experience is the same regardless of the underlying infrastructure since the appliance hides any platform idiosyncrasies.
The bottom line is that the appliance is purpose built to deploy and manage middleware and middleware application environments in a cloud, and as such, delivers immense out-of-the-box and ongoing value in this context. I should also point out that the design of the appliance acknowledges its purposeful nature. The CLI and REST API interfaces allow you to integrate the appliance into the operations of those general purpose provisioning solutions. In this way, IBM Workload Deployer acts as a middleware accelerator for your cloud computing efforts. This means that if you do have a general purpose solution, IBM Workload Deployer can still provide considerable value and let you avoid developing a considerable subsystem dedicated to deployment and management of middleware in the cloud. We believe in this type of integration, and have in fact built it into our own IBM solutions.
I could go on and on differentiating IBM Workload Deployer from the competition, but I hope my comments above give you a good context on why I think the appliance is in a league of its own. Of course, I always appreciate comments and feedback, so don't be shy!
In a post not long ago, I mentioned new enhancements to virtual system patterns in IBM Workload Deployer. A prominent part of those enhancements were updates to pattern construction that allow you to order virtual machine startup, order script package invocation, and include add-ons that provide system level configuration options. Recently I uploaded a demonstration to YouTube that highlights some of these new capabilities. Specifically, this provides a brief look at ordering and add-on enhancements.
I hope you take a look, and even more importantly, I hope to see some feedback. If you have something you would like to see captured in a demo, let me know and I'll work it to the top of a long and continually growing list!