When we talk about WebSphere CloudBurst, its applicability to development and test environments usually jumps out at the audience. Using the appliance, you can provision fully configured WebSphere cells (your applications included) as a set of virtual machines in a matter of minutes. Further, a patterns-based approach means you can be sure that you are going to get consistent results every time.
The ability to very quickly and consistently stamp out customized WebSphere environments is a huge benefit for test and development purposes because these are typically dynamic. Users frequently stand up and tear down these environments to support the application development process.
This is fine, but sometimes these benefits and particular use case for the appliance lead customers to wonder how it is applicable to production environments. After all, you do not frequently setup and tear down production environments. It is much more common that you deploy your production environment and leave it be so long as you are getting the desired behavior. So, how does WebSphere CloudBurst help with your production environments?
To answer this, we have to avoid looking at the appliance's applicability to production environments in a vacuum. What do I mean? Well, as you are well aware, an application environment goes through many stages in order to get to production. For example, in your organization a given application environment may go through development, test, staging, and pre-production before you finally promote it to production.
One of the challenges as you move your application environment from one stage to the next is maintaining configuration consistency. In other words, you somehow have to ensure that the environment you tested and verified is the same one that you eventually deploy into production. This is where WebSphere CloudBurst patterns can prove invaluable.
You can build WebSphere CloudBurst patterns that represent your various application environments (from the topology to the configuration), and effectively parameterize those patterns so that they can be used across each stage of your application lifecycle. For instance, as you move an application environment from development to test, the location of backend data sources may change. Simply make this location a parameter configurable during pattern deployment, and you can reuse the pattern for both development and test. If you extend this parameterization methodology to include the variable bits of configuration for each stage in the application's lifecycle, you can reuse the pattern from development all the way to production. The result is that you can be certain the environment you test and verify is the exact same one that you put in production.
For me, the beauty of WebSphere CloudBurst is really the patterns-based approach. This approach not only makes configuring and deploying WebSphere environments faster and simpler than ever, but it also makes the standing up of such environments easily repeatable. This can mean tremendous benefits for the deployment of your applications throughout their lifecycle.
When I talk to users familiar with both WebSphere CloudBurst and the IBM Systems Director VMControl offering, there is sometimes a bit of confusion. It is not surprising. Both WebSphere CloudBurst and IBM Systems Director VMControl allow users to create and manage virtualized environments. That leads us to an oft-asked question: What is the difference between WebSphere CloudBurst and IBM Systems Director VMControl?
The simple answer is that the difference in the two offerings is the degree to which they are purpose-built. IBM Systems Director VMControl equips users with broadly applicable capabilities to create and manage environments consisting of virtual machines. These capabilities extend to PowerVM, z/VM, VMware, and Microsoft Hyper-V hypervisor platforms. IBM Systems Director VMControl is not necessarily knowledgeable about the software running in the virtual machine, but it does allow the user to manage that asset effectively.
Compare and contrast that with the capabilities provided by WebSphere CloudBurst. The appliance also enables users to create and manage environments consisting of virtual machines. The difference is that WebSphere CloudBurst is purpose-built to provide you with the ability to create, deploy, and manage virtualized WebSphere environments quickly and easily.
What does that mean? Well, on one hand it means that WebSphere CloudBurst does not treat the virtual machines it creates like a black box. In fact, it knows quite a bit about the software running inside those machines, and provides users with out-of-the-box configuration and administration capabilities for said software. WebSphere CloudBurst knows how to interact with the software in the virtual machines to do things like federate WebSphere nodes into a cell, create application server clusters, configure environments for optimal performance, apply fixes and upgrades, and more. The best part is you do not need to supply any of your own scripts to do this. In short, the appliance ships with WebSphere intelligence.
Beyond this WebSphere intelligence, WebSphere CloudBurst enables users to create customized WebSphere environments (from the operating system up) and codify those customized environments in the form of patterns. These patterns, which represent your very own WebSphere application environments, enable you to deploy your applications rapidly, repeatedly and with extremely consistent results. In addition, the appliance allows you to define varying roles for users, each of those mapping to traditional data center responsibilities (i.e. customizing the operating system, building application infrastructure, carrying out middleware customizations, etc.). Again, WebSphere CloudBurst was purpose-built with WebSphere environments in mind.
It is not all about comparing and contrasting WebSphere CloudBurst and IBM Systems Director VMControl. In the case that you are using WebSphere CloudBurst to create and manage virtualized WebSphere environments on top of the PowerVM hypervisor platform, IBM Systems Director VMControl is actually a required component. In this scenario, the two offerings are complementary. WebSphere CloudBurst communicates with IBM Systems Director VMControl in order to create and configure the virtualized WebSphere environment requested by the user. This image below depicts how the two products work in conjunction in a PowerVM environment.
I hope this helps to shed light on how WebSphere CloudBurst compares to, contrasts with, and complements IBM Systems Director VMControl. Feel free to reach out to me on the blog or on Twitter (@damrhein) with any questions I did not answer here.
The 1.1.1 version of WebSphere CloudBurst is now available on the IBM support site, and you can read a bit about it here. I have not blogged about each and every point release of WebSphere CloudBurst here, but this particular one is significant. The 1.1.1 release adds support for IBM's z/VM hypervisor platform as a deployment target.
Quite simply this means that you can now create virtualized WebSphere application environments on the z/VM platform using WebSphere CloudBurst. This starts by first defining target hypervisors, instances of Linux Master Systems, that WebSphere CloudBurst can communicate with to setup virtual machines on z/VM. Coupled with support for the z/VM infrastructure components, there is a new version of the WebSphere Application Server Hypervisor Edition virtual image. While this new image contains the same basic components as the previous hypervisor edition images, it is packaged for the z/VM platform, and it includes a zLinux operating system.
Once you upgrade to WebSphere CloudBurst 1.1.1, you can define your z/VM infrastructure and use the new WebSphere Application Server Hypervisor Edition image to build custom patterns targeted for the z/VM platform. I put together a demonstration that provides a very brief overview of these new capabilities. As always, please reach out if you have any questions about this or any other WebSphere CloudBurst topic.
The WebSphere Application Server Hypervisor Edition virtual image is made up of four different virtual disks. One of those disks contains pre-created and pre-configured WebSphere Application Server profiles. When the image is activated (either through WebSphere CloudBurst or in a standalone fashion), all of the profiles not being used are deleted leaving only the intended WebSphere profile type.
Since the profiles are pre-created, this implies that certain information must be updated after the image is activated to reflect things that change with each node that is created. Among other things, the cell name, node name, and host name of the WAS profile configuration are usually updated during the image activation process. Nearly every time I talk to WAS administrators about WebSphere CloudBurst and WebSphere Application Server Hypervisor Edition they are intrigued by this particular configuration update and almost always ask "How do you do it?" (Dustin's note: Since the command to rename the cell is not officially documented, I have removed it from this post. I'm sorry, but it is for your own good!)
Most of the time this question pops up because users are attempting to, with a more narrow focus than WAS Hypervisor Edition, freeze-dry certain WAS configurations in their organization. However, no matter how they do that (virtual images, zipped up configuration files, etc.), they too need to update things like the cell, node, and host names when attempting to reuse the configuration. Many have gone down the route of trying to identify all of the different XML files they need to change in order to update this information, but this is untenable and in fact unnecessary.
If you need to update the node or host name, forget manually updating XML files. Instead, use these three wsadmin commands:
The commands can be run from a standalone node or from a deployment manager node. They are pretty straight forward, and if you need more information about them just take a look in the WebSphere Application Server Information Center. I hope this is helpful information, and stay away from those XML files!
I'm out at the RSA conference in San Francisco this week, and I'm expecting a lot of good conversations about WebSphere CloudBurst and security. This topic always comes up when I'm out and talking to customers, and I approach it from a few different angles.
First of all, WebSphere CloudBurst enables the creation of on-premise clouds (clouds in your data center). This means that you retain control over the resources that make up and support your cloud, and you have the ability to very tightly secure said resources. Notice that I say "you have the ability". I'm careful to point out that on-premise clouds do not inherently make your environment secure. If you don't already have a robust security strategy in place within your enterprise, then simply moving to a cloud model will not solve much. That being said, if you do have a comprehensive security strategy in place, one built around customized processes and access rights, then on-premise clouds are likely to make much more sense for you.
Moving beyond the opportunity for customized security controls provided by on-premise clouds, WebSphere CloudBurst delivers additional, unique security features. It starts on the outside with the tamper-resistant physical casing. If a malicious user attempts to remove the casing to get to the inner contents, the appliance is put into a dormant state, and it must be sent to IBM to be reset. "So what!" you say. If the user removes the casing and gets to the contents, couldn't they simply read the contents off the flash memory or hard disks directly, or insert them into another WebSphere CloudBurst Appliance and read them from there? Nope. All of the contents stored on the appliance's flash memory and hard disks are encrypted with a private key that cannot be changed and is unique to each and every appliance.
If you are at all familiar with WebSphere CloudBurst, you know that the appliance dispenses and monitors virtual systems running on a collection of hypervisors. Obviously then, the appliance must remotely communicate with the hypervisors. In order to secure this communication, all information between WebSphere CloudBurst and the hypervisors (and vice versa) is encrypted. This encryption is achieved by using an SSL certificate that is exchanged when a hypervisor is defined in WebSphere CloudBurst. This certificate must be accepted by a user, thus preventing rogue hypervisors from being defined in WebSphere CloudBurst.
Finally, WebSphere CloudBurst provides for the definition of users and user groups with varying permissions and resource access rights in the appliance. You don't have to turn over the keys to your cloud kingdom when you add a user to the appliance. You have the capability to define varying permissions (from simply deploying patterns, to creating them, all the way up to administering the cloud and appliance), and you have the ability to control access to resources (patterns, virtual images, script packages, cloud groups, etc.) at a fine-grained level. These two capabilities combine to allow you to control not only what actions a user can take, but also on which resources they can take those actions.
WebSphere CloudBurst was designed with focus on delivering a secure cloud experience, and I think it hit the mark. I'm sure I didn't address all your WebSphere CloudBurst and security related questions. If you have something specific in mind, leave a comment on the blog or reach out to me on Twitter. I'll do my best to address your question.
"What is the difference between WebSphere CloudBurst and IBM CloudBurst?" After the IBM Pulse 2010 event this week, I'm hearing this question in my sleep. It came from both our customers and other IBMers, and it's not hard to understand the confusion caused by the name similarity. Let's take a shot at clearing up any confusion around the two separate offerings and explain the complementary value WebSphere CloudBurst can provide IBM CloudBurst.
Both IBM CloudBurst and WebSphere CloudBurst provide capabilities to enable private, or on-premise, clouds. The main differences between the products are the degree to which they are purpose-built and the form in which they are delivered. First off, the IBM CloudBurst solution form factor consists of three primary elements: service management software, hardware, and IBM services. The software portion of the package provides general purpose (very important distinction) provisioning, workflow, and management capabilities for the services that make up your cloud. These services could consist of WebSphere software or any other software that you can package into a virtual image format. The hardware is the actual compute resource for your on-premise cloud, and the IBM services portion of the package provide a fastpath to get started with your cloud implementation.
On the other hand, WebSphere CloudBurst is a cloud management hardware appliance that delivers function to create, deploy, and manage virtualized WebSphere application environments in an on-premise cloud. WebSphere CloudBurst is purpose-built for WebSphere environments meaning that a lot of the things users would have to script with general purpose cloud provisioning solutions (creating clusters, federating nodes into a cell, applying fixes, etc.), are automatically handled by the appliance and virtual images with which it ships. Also, it is important to note that WebSphere CloudBurst works on a "bring your own cloud" model. The virtualized WebSphere application environments do not run on the appliance, but instead they are deployed to a shared pool of resources to which the appliance is configured to communicate.
While we are talking about two offerings that have the noted differences above, I should also point out the how and why of the integration of these two offerings. The WebSphere CloudBurst Appliance can be leveraged from within the IBM CloudBurst solution to handle the provisioning of WebSphere middleware environments in your data center. From the included Tivoli Service Automation Manager interfaces in the IBM CloudBurst solution, you can discover and deploy WebSphere CloudBurst patterns that exist on an appliance in your data center. WebSphere CloudBurst will deploy the patterns to the set of hardware resource provided by the IBM CloudBurst solution. Why would you want to integrate the two? If a large portion of your data center provisioning involves WebSphere middleware environments, WebSphere CloudBurst provides quick time to value and low cost of ownership. The WebSphere know-how is baked into the appliance and the virtual images it ships meaning that you don't need to develop and maintain what would be a rather large set of configuration scripts for the WebSphere environments running in your cloud.
I hope this clears the air a bit about not only the difference in IBM CloudBurst and WebSphere CloudBurst, but also about how and why these two can be integrated. I will never answer everyone's question in a simple blog post, so if I didn't address yours please leave a comment or reach out to me on Twitter @damrhein.
One of the new features that debuted in WebSphere CloudBurst 1.1 is the ability to resize the disks in a virtual image during the extend and capture (image customization) process. If you remember, the virtual images that exist in the WebSphere CloudBurst catalog are made of multiple virtual disks. In WebSphere CloudBurst 1.0 a default size was used for the virtual disks and this could not be changed, even during the image extension process. To be quite honest we got quite a bit of feedback about this, and so with version 1.1 while default sizes are still provided, you can specify the eventual size of each of the virtual disks during the image extension process.
As an example, consider the WebSphere Application Server Hypervisor Edition virtual image. This image contains four virtual disks: one for the WebSphere Application Server binaries, one for the WebSphere Application Server profiles, one for the IBM HTTP Server, and one for the operating system. The default size of each of these disks in the 188.8.131.52 version of the image is 6GB, 2GB, 1GB, and 12GB respectively, for a total of roughly 21GB. While that may be fine for some, what happens if you are going to be installing various other third-party software packages in the image? You may need more disk space for the operating system's virtual disk. Perhaps your WebSphere applications produce log files of considerable size. In that case you may want to increase the default size of the WebSphere Application Server profiles disk space.
Those scenarios and more are exactly why the resizing capability was added. When you extend the WebSphere Application Server Hypervisor Edition 184.108.40.206 virtual image in WebSphere CloudBurst 1.1, you will be presented the option to resize one or more of the virtual disks:
In the case above the default operating system disk size is bumped up to 16GB from the default 12GB size. Also note that in addition to changing the disk size, you can specify the number of network interfaces for your custom image.
Obviously, when you increase the size of the disks within the virtual image you are also increasing the storage requirements for that image when it is deployed to a hypervisor. Keep this in mind when you are calculating the upper bound capacity of your cloud. If you want to see more about how this feature works, check out this video.
The ability to package custom maintenance packages and upload them as emergency fixes is perhaps a lesser known feature of WebSphere CloudBurst, but nevertheless something that's been around since the product's initial release. This is a powerful feature that allows you to build your own fix packages that you can then apply the same way you would use WebSphere CloudBurst to apply a PAK file or fixpack shipped by IBM.
Since IBM is delivering fixes and updates to all of the contents within WebSphere Application Server Hypervisor Edition virtual images (including the OS and IBM software components), you may wonder why you would even want to create your own maintenance packages. One reason would be if you switched out the SUSE Linux operating system shipped with the VMware ESX based images in favor of your own Red Hat operating system. In that case you would be responsible for maintenance to the operating system, and custom maintenance packages would be of interest to you. Another scenario where these custom maintenance packages come in handy would be if you created your own customized images that include non-shipped third-party software in addition to the software shipped in the images. If at some point you have the need to fix or update this software in a running virtual machine, custom maintenance packages provide you the vehicle with which to do just that.
What do these custom maintenance packages look like? In short, they are simply archives or ZIP files. The contents of the archive are largely decided by you, but there is one piece of metadata that is necessary if you want to use WebSphere CloudBurst to apply the maintenance. A file called service.xml is inserted into the root of the archive and tells WebSphere CloudBurst critical information about the custom fix archive. Here's an example of a service.xml file:
Most notably, this metadata tells WebSphere CloudBurst what module or script to invoke to apply the maintenance (Command, this executable is supplied by you), what image versions the fix is applicable to (ImagePrereqs), and the location of the working directory on the virtual machine (Location). In addition to the service.xml file and the executable, you can package up anything else, such as product binaries, which are needed to successfully apply the fix/upgrade/maintenance.
If you haven't noticed, this is an extremely flexible mechanism and can be used for just about anything. I should point out that you can only apply a given fix once per virtual machine, so it's not good for something that you want to run repeatedly against a given machine (check out user-initiated script packages instead). Also, there is a 512MB size limit on the archives. Keep these restrictions in mind when you are deciding how to use custom maintenance packages. If you are interested in learning a bit more about custom maintenance packages or other maintenance techniques, check out this article I co-authored along with Xiao Xing Liang from the IBM SOA Design Center in the China Development Lab.
When it comes to managing users and user groups within WebSphere CloudBurst, you can choose to manage all aspects of those resources within the appliance. Mainly this means that you can define and store user information (including login passwords) within the appliance, and you can define and maintain user groups and their associated membership list on the appliance. While you can do this and be sure that your information is extremely secure, you may instead want to integrate with an existing LDAP server that has some of this user and user group data. WebSphere CloudBurst certainly allows you to integrate with LDAP servers, but what does that mean for you?
For starters, when you integrate WebSphere CloudBurst with an LDAP server and enable the LDAP authentication feature, you no longer specify password information when defining users of the appliance. When users login, the password they specify will be authenticated against information stored in the LDAP server. Naturally, if you add a new WebSphere CloudBurst user with LDAP authentication enabled, that user must be defined in the LDAP server. Otherwise, WebSphere CloudBurst will prevent you from adding the user because it has no way to authenticate that person.
From a user groups standpoint, integrating with LDAP means you can no longer modify user group membership. User membership in groups is determined by information in the LDAP server. As a result, the same rule concerning adding new users applies when adding new user groups: You cannot define new user groups that do not exist in the LDAP server.
If you want to take a look at what LDAP integration looks like with WebSphere CloudBurst, I put together a short video. Let me know what you think.
If you've read anything I've written about WebSphere CloudBurst up to this point you know all about patterns. Using the appliance you can easily and quickly build, deploy, and manage these representations of your middleware application environments. Today, I want to focus in on the deployment piece in particular and take a look at how you can easily automate this process.
You can use the WebSphere CloudBurst web console to deploy patterns, and when doing so you can even schedule the deployment to happen at a later date. This scheduling capability certainly gets you on the road to an automated deployment process, but what if you want to take it one step further and eliminate the need for someone to login and manually move around the web console to schedule automated deployments? In this case, you can use either the CLI or the REST interface that WebSphere CloudBurst offers.
In this post I thought I'd take a look at using the CLI interface in order to set the stage for some nice automation around pattern deployment. It starts out with a properties file that provides details about my deployment. This includes the cloud to deploy to, the pattern to deploy, password information, and the time at which the virtual system should start.
SYSTEM_NAME_PREFIX=New App Development
TARGET_CLOUD=Default ESX group
TARGET_PATTERN=WebSphere single server
Imagine that the properties file above gets written as the result of some other action, such as the completion of your application's build process. With the properties file in place, and I'll point out that your properties file can and probably will be more robust than above, let's move on to the code that handles the deployment process based on the information in said file. First, we have a small amount of CLI code to retrieve and parse the input data (I omitted the straight-forward properties retrieval for space):
from datetime import datetime, timedelta
from java.util import Properties
from java.io import FileInputStream
// read in and retrieve properties using java.util.Properties API (i.e. props.getProperty('DEPLOYMENT_DATE'))
parsedParts = deploymentDate.split(" ")
systemName = systemName + "_" + deploymentDate
dateParts = parsedParts.split("/")
timeParts = parsedParts.split(":")
monthPart = int(dateParts)
dayPart = int(dateParts)
yearPart = int(dateParts)
hourPart = int(timeParts)
minutePart = int(timeParts)
Next is the code that actually schedules the pattern deployment:
First we get the desired deployment time and current time as datetime objects. After that, assuming the desired deployment time has not already elapsed, we calculate the difference between the desired deployment time and current time. This difference, in seconds, is then added to the result of the time.time() value to come up with a start time. After that is done, we simply retrieve the cloud that was indicated in the properties file, and then we call the runInCloud method for the pattern indicated. When calling the runInCloud method we supply the name of the virtual system that will be created, password information, and the start time we calculated earlier. As a result of this method call, a task will be generated in the target WebSphere CloudBurst Appliance and the virtual system will be started at the specified time. This will happen in an automated fashion with no human intervention required.
That's really all there is to automating the pattern deployment process using the CLI. In a more complete, end-to-end scenario you may envision the completion of one process, such as an application build process mentioned above, result in the writing of the properties file and in turn the call into the CLI to deploy a pattern. As always, feel free to send me any comments or questions.