I'm out at the RSA conference in San Francisco this week, and I'm expecting a lot of good conversations about WebSphere CloudBurst and security. This topic always comes up when I'm out and talking to customers, and I approach it from a few different angles.
First of all, WebSphere CloudBurst enables the creation of on-premise clouds (clouds in your data center). This means that you retain control over the resources that make up and support your cloud, and you have the ability to very tightly secure said resources. Notice that I say "you have the ability". I'm careful to point out that on-premise clouds do not inherently make your environment secure. If you don't already have a robust security strategy in place within your enterprise, then simply moving to a cloud model will not solve much. That being said, if you do have a comprehensive security strategy in place, one built around customized processes and access rights, then on-premise clouds are likely to make much more sense for you.
Moving beyond the opportunity for customized security controls provided by on-premise clouds, WebSphere CloudBurst delivers additional, unique security features. It starts on the outside with the tamper-resistant physical casing. If a malicious user attempts to remove the casing to get to the inner contents, the appliance is put into a dormant state, and it must be sent to IBM to be reset. "So what!" you say. If the user removes the casing and gets to the contents, couldn't they simply read the contents off the flash memory or hard disks directly, or insert them into another WebSphere CloudBurst Appliance and read them from there? Nope. All of the contents stored on the appliance's flash memory and hard disks are encrypted with a private key that cannot be changed and is unique to each and every appliance.
If you are at all familiar with WebSphere CloudBurst, you know that the appliance dispenses and monitors virtual systems running on a collection of hypervisors. Obviously then, the appliance must remotely communicate with the hypervisors. In order to secure this communication, all information between WebSphere CloudBurst and the hypervisors (and vice versa) is encrypted. This encryption is achieved by using an SSL certificate that is exchanged when a hypervisor is defined in WebSphere CloudBurst. This certificate must be accepted by a user, thus preventing rogue hypervisors from being defined in WebSphere CloudBurst.
Finally, WebSphere CloudBurst provides for the definition of users and user groups with varying permissions and resource access rights in the appliance. You don't have to turn over the keys to your cloud kingdom when you add a user to the appliance. You have the capability to define varying permissions (from simply deploying patterns, to creating them, all the way up to administering the cloud and appliance), and you have the ability to control access to resources (patterns, virtual images, script packages, cloud groups, etc.) at a fine-grained level. These two capabilities combine to allow you to control not only what actions a user can take, but also on which resources they can take those actions.
WebSphere CloudBurst was designed with focus on delivering a secure cloud experience, and I think it hit the mark. I'm sure I didn't address all your WebSphere CloudBurst and security related questions. If you have something specific in mind, leave a comment on the blog or reach out to me on Twitter. I'll do my best to address your question.
The concepts that govern users and user groups in WebSphere CloudBurst are fairly basic, but I get asked about them enough that I believe they warrant a short discussion. First things first, you can define users in WebSphere CloudBurst and optionally define user groups to assemble users into logical collections. For both users and user groups, you can assign roles that define the actions a particular user or group of users can take using the appliance.
All of that is straight forward, but it can get a bit tricky once we start considering the effects of user permissions when managing at the user group level. The basic premise is that when a user belongs to a group or groups, the user's effective permissions are a sum of the permissions to all of the groups to which they belong. While that is easy to say, and maybe even to understand, I feel like an example always helps.
Consider that we have a single user WCAGuy that belongs to the PatternAuthors, ContentCreators, and CloudAdmins groups. The permissions for those groups are as follows:
PatternAuthors: Users in this group have permission to create and deploy patterns
ContentCreators: Users in this group have permission to create catalog content as well as create and deploy patterns
CloudAdmins: Users in this group have permission to administer the cloud, create catalog content, and create and deploy patterns
Naturally then, it follows that the WCAGuy user can administer the cloud, create catalog content, create patterns, and deploy patterns. So then, what happens if we remove the WCAGuy user from the CloudAdmins user group? Well, as you may expect, there is an update to the user's permissions. The WCAUser user can no longer administer the cloud, but they can still create catalog content, create patterns, and deploy patterns (owing to their membership in the other two groups). Similarly, if we next removed the WCAGuy user from the ContentCreators group, then the user would retain only the permission to create and deploy patterns.
Just one more thing, let's talk about what happens when I remove a user from a group and they no longer belong to any groups. Consider that I created the WCAGuy user with the permission to create catalog content as well as create and deploy patterns. Next, I added the user to the CloudAdmins group, meaning the user now has the permission to administer the cloud. I promptly decide that the user has no business with those permissions, so I remove the user from the CloudAdmins group. What happens? The user retains the permission set of the last group to which they belonged. In this case, that means the WCAGuy user retains cloud administration rights. I have to update the user's permission set if I want to take that right away, but in this case, it will not automatically disappear upon removing them from the CloudAdmins group.
I hope this helps clear up any ambiguity you may have had concerning users, user groups, and permission sets in WebSphere CloudBurst.
If you are going to install and use WebSphere CloudBurst in your own environment, it is very likely that you would want at least two appliances. Perhaps you want to have a standby appliance in case of a failure on the main appliance, or maybe you have different teams that are looking to utilize the appliance in different data centers. In any case, once you install multiple appliances there's another requirement that will pop up pretty quickly. Naturally you are going to want to share custom artifacts among the various WebSphere CloudBurst boxes.
When I say custom artifacts, namely I mean virtual images, patterns, and script packages. Script packages have been easy enough to share since WebSphere CloudBurst 1.0 because you can simply download the ZIP file from one appliance and upload it to another. However, there are some enhancements in WebSphere CloudBurst 1.1 that make it easy to share both patterns and images among your different appliances.
As far as patterns go, there is a new script included in the samples directory of the WebSphere CloudBurst command line interface package called patternToPython.py. This script will transform a pattern you specify into a python script. The resulting python script can then be run against a different WebSphere CloudBurst (using the CLI), and the result is the pattern is created on the target appliance. You need to be sure that the artifacts that pattern references (script packages and virtual images) exist on the target appliance and have the exact same name as they do on the appliance from which the pattern was taken. There are no other caveats, and this new sample script makes it really simple to move patterns between appliances.
For virtual images, a new feature was added that allows you to export a virtual image from the WebSphere CloudBurst console. Simply select a virtual image, specify a remote machine (any machine with SCP enabled), and click a button to export the image as an OVA file. This OVA file can then be added to another WebSphere CloudBurst catalog using the normal process for adding virtual images. You can see this feature in action here.
Stay tuned for more information about some of the handy new features in WebSphere CloudBurst 1.1. We also should have a comprehensive look at the new release coming soon in a developerWorks article.
It's about the time of year when we all look back and try to determine exactly how we spent the past twelve months. Whether we do it because we have to as part of year-end job reviews or because we like to take stock in what we've done and figure out where to improve next year, it's a time for reflection and recall. For me, this exercise made me take a look at various things we have done to deliver WebSphere CloudBurst technical collateral (articles, demos, blogs, etc.) in 2009.
For all practical purposes, our mission and efforts for such technical collateral for WebSphere CloudBurst started when it was announced at Impact in May of this year. Though there was certainly some preparatory work being done on this front, there was nothing we could really push to the public until after the announcement, and in some cases even after the appliance's release in June. Given that most of the content was produced over a six month stretch, I really think we put forth a strong effort, and I hope that this technical material has helped to both raise awareness of and educate users on the WebSphere CloudBurst Appliance.
Seeing as I already went back and rounded up this content, I thought I'd provide you a centralized look at the information. To start, I accounted for the articles that we published to the IBM developerWorks site over the six month stretch. All together I counted 8 articles and a special column entry:
As you can see the articles cover quite a bit of content and range from general level overview articles to technical in-depth "how-to" style articles. In general they seem to have been received well with over 26,000 views to this point. Our goal is to keep the pace up for 2010, and we already have a few articles on our plate for early in the new year (including an overview of what's new in WebSphere CloudBurst 1.1).
Another main medium we utilized to spread the word about WebSphere CloudBurst was YouTube. On our YouTube channel at http://youtube.com/websphereclouds, we currently have 17 different videos that demonstrate how to use certain features of the WebSphere CloudBurst Appliance. Though I think each demo provides value depending on exactly what a viewer is looking for, 3 of them really stick out for me.
Check out our videos if you get a chance. We've made an effort to keep them as short as possible while still providing value to viewers.
We have some WebSphere CloudBurst content spread around other places as well including this blog and my personal blog. Over the next few weeks we'll be taking a look at what worked and didn't work with respect to getting information out to the public. Of course at any time we very much appreciate your feedback on how you like to see content delivered because you are our target audience! If you have a comment, idea, or suggestion, leave a comment on the blog or send me a tweet to @WebSphereClouds.
In a previous post, entitled Layers of Elasticity, I talked about the new dynamic virtual machine operations in WebSphere CloudBurst. Specifically, I showed you how to use the WebSphere CloudBurst web console to add more virtual machines (nodes) to an existing virtual system. Well, you can do this with the WebSphere CloudBurst command line interface as well.
First, let's assume I start off with a basic WAS ND environment represented by the pattern below:
When I deploy this pattern in WebSphere CloudBurst, I end up with two virtual machines: one for the deployment manager with an embedded IHS instance, one for my custom node federated into the cell. After deployment, suppose I want to use the CLI to interact with this virtual system. Assuming the name of my virtual system is Cluster, I can view my custom node virtual machine with the following CLI code:
The call to the clone function above takes care of creating a new profile and federating the new node into the cell. In addition, WebSphere CloudBurst automatically invokes any script packages from the source virtual machine marked to run at virtual system creation. All because of this single line of code!
The WebSphere CloudBurst CLI is a powerful interface that enables you to automate the function of the appliance. Check it out, become familiar with it, and make WebSphere CloudBurst processes a seamless part of your overall data center management approach.
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
In a recent post, Joe Bohn detailed some of the new capabilities and enhancements that come along with the recently delivered IBM Workload Deployer v3.1. To be sure, there are many valuable new features such as PowerVM support for virtual application patterns, the Plugin Developer Kit, WebSphere Application Server Hypervisor Edition v8, and more. Each of these topics probably merit their own post, but today I want to talk about something I did not mention above. Specifically, I want to talk about the announcements regarding the IBM Image Construction and Composition Tool (ICCT) and what that means for IBM Workload Deployer users.
You may have read an earlier post that I wrote about the ICCT, but allow me a brief overview here. In short, the ICCT enables the construction of custom virtual images for use in IBM Workload Deployer. You use the tool to create virtual images, much like IBM Hypervisor Edition images, and then you can use those custom images (containing whatever content you need) to create your own custom virtual system patterns. The key point about the custom images you create with the ICCT is that they are dynamically configurable. That is, the tool helps you to create the images in such a way that you can defer configuration until deploy time rather than burning such configuration directly into an image. For those of you familiar with virtual image creation, you know this type of 'intelligent construction' is a huge step towards keeping image inventory at a reasonable level.
Okay, enough of a general overview for now. Let's talk about the two new items of note regarding IBM Workload Deployer v3.1 and the ICCT. The first thing you should know is that starting in IBM Workload Deployer v3.1, the ICCT is shipped with the appliance. This means that you do not need to go anywhere else in order to get your hands on the tool to start creating your custom images. You simply log into IBM Workload Deployer and click the download link on the appliance's welcome panel (shown in image below).
Getting your hands on the tool is one piece of the puzzle, but using it is quite another. While the ICCT has been available as an alphaWorks project for some time, that also implies that there has never been official support for the tool. That changes starting with IBM Workload Deployer v3.1. The ICCT is now a generally available product from IBM, and that means that it is fully and officially supported as well. Further, the images you create using the tool are also officially supported for use as building blocks of your IBM Workload Deployer virtual system patterns. For many of you who have been using the ICCT for some time, but have been hesitant to expand use because of the lack of a formal support statement, you should now feel free to charge forward!
I hope this helps clear up exactly what the new Image Construction and Composition Tool announcements that were part of IBM Workload Deployer v3.1 actually mean. I cannot wait to hear about how you all are putting the ICCT to use with IBM Workload Deployer. Finally, don't forget to send us any questions, comments, or other feedback that you may have regarding this or any other new feature in IBM Workload Deployer v3.1!
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
"What is the difference between WebSphere CloudBurst and IBM CloudBurst?" After the IBM Pulse 2010 event this week, I'm hearing this question in my sleep. It came from both our customers and other IBMers, and it's not hard to understand the confusion caused by the name similarity. Let's take a shot at clearing up any confusion around the two separate offerings and explain the complementary value WebSphere CloudBurst can provide IBM CloudBurst.
Both IBM CloudBurst and WebSphere CloudBurst provide capabilities to enable private, or on-premise, clouds. The main differences between the products are the degree to which they are purpose-built and the form in which they are delivered. First off, the IBM CloudBurst solution form factor consists of three primary elements: service management software, hardware, and IBM services. The software portion of the package provides general purpose (very important distinction) provisioning, workflow, and management capabilities for the services that make up your cloud. These services could consist of WebSphere software or any other software that you can package into a virtual image format. The hardware is the actual compute resource for your on-premise cloud, and the IBM services portion of the package provide a fastpath to get started with your cloud implementation.
On the other hand, WebSphere CloudBurst is a cloud management hardware appliance that delivers function to create, deploy, and manage virtualized WebSphere application environments in an on-premise cloud. WebSphere CloudBurst is purpose-built for WebSphere environments meaning that a lot of the things users would have to script with general purpose cloud provisioning solutions (creating clusters, federating nodes into a cell, applying fixes, etc.), are automatically handled by the appliance and virtual images with which it ships. Also, it is important to note that WebSphere CloudBurst works on a "bring your own cloud" model. The virtualized WebSphere application environments do not run on the appliance, but instead they are deployed to a shared pool of resources to which the appliance is configured to communicate.
While we are talking about two offerings that have the noted differences above, I should also point out the how and why of the integration of these two offerings. The WebSphere CloudBurst Appliance can be leveraged from within the IBM CloudBurst solution to handle the provisioning of WebSphere middleware environments in your data center. From the included Tivoli Service Automation Manager interfaces in the IBM CloudBurst solution, you can discover and deploy WebSphere CloudBurst patterns that exist on an appliance in your data center. WebSphere CloudBurst will deploy the patterns to the set of hardware resource provided by the IBM CloudBurst solution. Why would you want to integrate the two? If a large portion of your data center provisioning involves WebSphere middleware environments, WebSphere CloudBurst provides quick time to value and low cost of ownership. The WebSphere know-how is baked into the appliance and the virtual images it ships meaning that you don't need to develop and maintain what would be a rather large set of configuration scripts for the WebSphere environments running in your cloud.
I hope this clears the air a bit about not only the difference in IBM CloudBurst and WebSphere CloudBurst, but also about how and why these two can be integrated. I will never answer everyone's question in a simple blog post, so if I didn't address yours please leave a comment or reach out to me on Twitter @damrhein.
When we talk about WebSphere CloudBurst, its applicability to development and test environments usually jumps out at the audience. Using the appliance, you can provision fully configured WebSphere cells (your applications included) as a set of virtual machines in a matter of minutes. Further, a patterns-based approach means you can be sure that you are going to get consistent results every time.
The ability to very quickly and consistently stamp out customized WebSphere environments is a huge benefit for test and development purposes because these are typically dynamic. Users frequently stand up and tear down these environments to support the application development process.
This is fine, but sometimes these benefits and particular use case for the appliance lead customers to wonder how it is applicable to production environments. After all, you do not frequently setup and tear down production environments. It is much more common that you deploy your production environment and leave it be so long as you are getting the desired behavior. So, how does WebSphere CloudBurst help with your production environments?
To answer this, we have to avoid looking at the appliance's applicability to production environments in a vacuum. What do I mean? Well, as you are well aware, an application environment goes through many stages in order to get to production. For example, in your organization a given application environment may go through development, test, staging, and pre-production before you finally promote it to production.
One of the challenges as you move your application environment from one stage to the next is maintaining configuration consistency. In other words, you somehow have to ensure that the environment you tested and verified is the same one that you eventually deploy into production. This is where WebSphere CloudBurst patterns can prove invaluable.
You can build WebSphere CloudBurst patterns that represent your various application environments (from the topology to the configuration), and effectively parameterize those patterns so that they can be used across each stage of your application lifecycle. For instance, as you move an application environment from development to test, the location of backend data sources may change. Simply make this location a parameter configurable during pattern deployment, and you can reuse the pattern for both development and test. If you extend this parameterization methodology to include the variable bits of configuration for each stage in the application's lifecycle, you can reuse the pattern from development all the way to production. The result is that you can be certain the environment you test and verify is the exact same one that you put in production.
For me, the beauty of WebSphere CloudBurst is really the patterns-based approach. This approach not only makes configuring and deploying WebSphere environments faster and simpler than ever, but it also makes the standing up of such environments easily repeatable. This can mean tremendous benefits for the deployment of your applications throughout their lifecycle.
One of the new features that debuted in WebSphere CloudBurst 1.1 is the ability to resize the disks in a virtual image during the extend and capture (image customization) process. If you remember, the virtual images that exist in the WebSphere CloudBurst catalog are made of multiple virtual disks. In WebSphere CloudBurst 1.0 a default size was used for the virtual disks and this could not be changed, even during the image extension process. To be quite honest we got quite a bit of feedback about this, and so with version 1.1 while default sizes are still provided, you can specify the eventual size of each of the virtual disks during the image extension process.
As an example, consider the WebSphere Application Server Hypervisor Edition virtual image. This image contains four virtual disks: one for the WebSphere Application Server binaries, one for the WebSphere Application Server profiles, one for the IBM HTTP Server, and one for the operating system. The default size of each of these disks in the 18.104.22.168 version of the image is 6GB, 2GB, 1GB, and 12GB respectively, for a total of roughly 21GB. While that may be fine for some, what happens if you are going to be installing various other third-party software packages in the image? You may need more disk space for the operating system's virtual disk. Perhaps your WebSphere applications produce log files of considerable size. In that case you may want to increase the default size of the WebSphere Application Server profiles disk space.
Those scenarios and more are exactly why the resizing capability was added. When you extend the WebSphere Application Server Hypervisor Edition 22.214.171.124 virtual image in WebSphere CloudBurst 1.1, you will be presented the option to resize one or more of the virtual disks:
In the case above the default operating system disk size is bumped up to 16GB from the default 12GB size. Also note that in addition to changing the disk size, you can specify the number of network interfaces for your custom image.
Obviously, when you increase the size of the disks within the virtual image you are also increasing the storage requirements for that image when it is deployed to a hypervisor. Keep this in mind when you are calculating the upper bound capacity of your cloud. If you want to see more about how this feature works, check out this video.
I want to clear something up about WebSphere CloudBurst that can sometimes cause a bit of confusion. In nearly all of our content about the appliance, we talk about it in the context of building private clouds consisting of WebSphere application environments. Typically people think of private clouds as something only those within their organization can access and utilize. However, with WebSphere CloudBurst you are not limited to creating that kind of a private cloud.
Perhaps it is more fitting that we talk about WebSphere CloudBurst as a means to create on-premise clouds. After all, that's really what we mean. You create a shared pool of hardware and network resources owned by your organization, and then you define this cloud of resources to WebSphere CloudBurst. Once that cloud is defined, you can leverage WebSphere CloudBurst to dispense your WebSphere application environments into that cloud. The accessibility of your application environments running in that cloud is entirely up to you.
You may decide that the cloud is indeed private and that only those in your organization or a smaller subset of users can access the environments. On the other hand, you may decide that you want to allow consumers in the public domain to request WebSphere application environments and then have WebSphere CloudBurst provision those environments into a public cloud. I say public here because while the cloud's resources are on your premise, access to that cloud is not restricted to within the organizational firewall. Ultimately, the determining factor for whether or not your WebSphere CloudBurst cloud is public or private is the network configuration you provide. If the virtual machines are associated with network resources that are publicly accessible, then I would say you have a public cloud.
I hope this entry didn't serve to only add to the confusion. The bottom line is this: WebSphere CloudBurst allows you to create, deploy, and maintain virtualized WebSphere environments in an on-premise cloud. Whether that cloud is public or private is entirely up to the network configuration that you setup.
The answer is yes, I did a related but different blog post with a similar title a few weeks back. At that time I was primarily highlighting a webinar that I co-presented with Keith Smith regarding the various virtualization solutions and features that are available in IBM Workload Deployer in virtual application patterns and virtual system patterns leveraging the Intelligent Management Pack (IMP). If you didn't get a chance to attend that webcast live then I encourage you to check out the replay (especially Keith's portion with details on IMP - a really helpful overview).
This new blog post expands on the theme of that original blog post but takes a broader vision of where IBM has been with our private cloud offerings in WCA and IWD up to and including the recently announced IBM PureApplication System - and how this history demonstrates our leadership in supporting applications in the cloud.
Over the last three posts I've been discussing a few of the most frequently asked questions regarding the WebSphere CloudBurst Appliance. I'd like to wrap up today with a fourth and final installment.
If you have read some of my entries before, or if you have read any of our WebSphere CloudBurst articles on IBM's developerWorks, then you know that the appliance brings extreme simplification and safety to applying fixes and service level upgrades to running WebSphere Application Server virtual systems. Users select a virtual system, choose a fix or service level upgrade, and then WebSphere CloudBurst drives the application of the fix or upgrade to the system. Before applying the fix or upgrade, the appliance takes a snapshot of the virtual system, and users can simply click a button to roll back to the previous state if the process produces undesired results.
This is a pretty strong value add to WebSphere Application Server management and one that our users typically immediately understand. Almost always though, after users see this they are curious about another aspect of rolling out fixes and upgrades in WebSphere CloudBurst. In particular, they want to know how they ensure that all subsequent deployments (after applying the fix to a specific virtual system) can be ensured of having the correct fixes and service levels.
The answer to this inquiry is that there are a couple of different ways to achieve this, and it depends on what you are try to accomplish and your preferences. For instance, if you want to make sure all of your subsequent deployments have a particular interim fix, you will likely go the route of image extension. First, you pick the WebSphere Application Server Hypervisor Edition image in your catalog to which the fix applies. Next, you extend that image, and once a virtual machine based off the image is accessible, you use existing WebSphere Application Server tools (Update Installer) to apply the fix. After the fix has been applied, you can capture the updated image and then use it as the basis for patterns created from that particular version of the WebSphere Application Server.
On the other hand, if you are looking to ensure subsequent deployments are based on a new level of the WebSphere Application Server, your process will be a bit different. First you would load a new WebSphere Application Server Hypervisor Edition image (based on the new level of WebSphere Application Server) into your WebSphere CloudBurst catalog. Then you would select any of your customized patterns you wanted to upgrade to the new level, clone that pattern, and simply select the new image as the basis for the pattern. All of your other customizations are preserved. Really, it's that simple!
I hope that over the last month I have answered some of the more common questions about WebSphere CloudBurst. At any point if you have any questions feel free to email me or leave a comment right here on the blog.
Users of cloud computing solutions today expect to be charged for exactly the amount of compute resource they use. No more, no less. This expectation is often at the forefront of our customers' minds when contemplating the creation of internal or private clouds. They want to be sure that any solution they use audits the activity and usage of their cloud and enables them to consume this information to implement their specific chargeback scheme.
Thought it's not a feature we always seem to talk about, WebSphere CloudBurst provides the necessary capabilities to properly allocate costs to users, teams, and organizations. To start with there are some handy usage reports that you can view directly from the WebSphere CloudBurst console. For instance, as seen below, a WebSphere CloudBurst administrator can see a break down of cloud resource usage for each user of the appliance.
While the capability illustrated above is nice, it is likely that if you are implementing an enterprise-scale chargeback scheme you want to automate the processing of the usage data, thus implying the need to programatically consume such data. WebSphere CloudBurst enables you to do just this by way of its audit log. The WebSphere CloudBurst audit log is a record of each and every action taken in the appliance, along with information about who took the action, when the action was taken, what object the action was taken on, and much more. You can instruct the appliance to generate this file for a specified date range, and the output is a comma separated value file that can then be consumed in a manner of your choosing.
As an example of some of the things you can do with this data, I recently wrote a Java program that parsed the audit file and for each virtual system determined who created it, who deleted it (if it had been removed), and the duration of its existence. This program was simple (more of a string parsing exercise than anything else), but nonetheless provided necessary function and output for billing schemes based on hours of usage. If you are interested in how this was done please let me know and I'd be happy to discuss details. In the meantime, if you have any thoughts you can reach me on Twitter via @WebSphereClouds.