I point this out about script packages because recently I put one together that is not a WebSphere Application Server administration task, but does provide configuration logic common to many WAS deployments. Specifically, I put together a script package that configures an IBM HTTP Server to be a reverse proxy server. This of course, allows clients to send requests to the IBM HTTP Server and have those requests pass through to a specified back-end destination (i.e. a service hosted on WebSphere Application Server) based on URI paths.
The script package is not all that different from many of the ones I put together. It contains a shell script (which provides configuration and orchestration logic) as well as a cbscript.json file that defines the script package's characteristics when I upload it into WebSphere CloudBurst. The notable difference in this script package is that I include a Perl script that modifies the IBM HTTP Server configuration file. This just reiterates the point that you are not limited to only wsadmin and shell scripts within your script packages.
The workings of the script package are quite straightforward. It starts with a call to the shell script that modifies the IBM HTTP Server's configuration file to ensure the loading of a couple proxy modules:
sed -i s/"#LoadModule proxy_module modules\/mod_proxy.so"/"LoadModule proxy_module modules\/mod_proxy.so"/g $HTTP_CONF
sed -i s/"#LoadModule proxy_http_module modules\/mod_proxy_http.so"/"LoadModule proxy_http_module modules\/mod_proxy_http.so"/g $HTTP_CONF
As you can see, the createProxy.pl script accepts a single argument. This argument represents the reverse proxy configuration information provided by the user during deployment. The Perl script parses the single argument and creates the appropriate proxy directives in the IBM HTTP Server's configuration file:
After the invocation of the script above, control returns to the shell script. The shell script restarts the IBM HTTP Server so that the configuration changes take place. The result is an up and running IBM HTTP Server acting as a reverse proxy based on information supplied during deployment. The listings here do not show the full script package, but I hope to have it up on our WebSphere CloudBurst Samples Gallery soon.
If the script above provides some configuration logic you can use, that is good. However, my main point for bringing it up here is to point out that WebSphere CloudBurst script packages can be more than shell and wsadmin scripts that perform WebSphere Application Server configuration tasks. You can use them to do any sort of scripted activity that is essential to your application middleware deployment process. Happy scripting!
If you are going to install and use WebSphere CloudBurst in your own environment, it is very likely that you would want at least two appliances. Perhaps you want to have a standby appliance in case of a failure on the main appliance, or maybe you have different teams that are looking to utilize the appliance in different data centers. In any case, once you install multiple appliances there's another requirement that will pop up pretty quickly. Naturally you are going to want to share custom artifacts among the various WebSphere CloudBurst boxes.
When I say custom artifacts, namely I mean virtual images, patterns, and script packages. Script packages have been easy enough to share since WebSphere CloudBurst 1.0 because you can simply download the ZIP file from one appliance and upload it to another. However, there are some enhancements in WebSphere CloudBurst 1.1 that make it easy to share both patterns and images among your different appliances.
As far as patterns go, there is a new script included in the samples directory of the WebSphere CloudBurst command line interface package called patternToPython.py. This script will transform a pattern you specify into a python script. The resulting python script can then be run against a different WebSphere CloudBurst (using the CLI), and the result is the pattern is created on the target appliance. You need to be sure that the artifacts that pattern references (script packages and virtual images) exist on the target appliance and have the exact same name as they do on the appliance from which the pattern was taken. There are no other caveats, and this new sample script makes it really simple to move patterns between appliances.
For virtual images, a new feature was added that allows you to export a virtual image from the WebSphere CloudBurst console. Simply select a virtual image, specify a remote machine (any machine with SCP enabled), and click a button to export the image as an OVA file. This OVA file can then be added to another WebSphere CloudBurst catalog using the normal process for adding virtual images. You can see this feature in action here.
Stay tuned for more information about some of the handy new features in WebSphere CloudBurst 1.1. We also should have a comprehensive look at the new release coming soon in a developerWorks article.
I'm out at the RSA conference in San Francisco this week, and I'm expecting a lot of good conversations about WebSphere CloudBurst and security. This topic always comes up when I'm out and talking to customers, and I approach it from a few different angles.
First of all, WebSphere CloudBurst enables the creation of on-premise clouds (clouds in your data center). This means that you retain control over the resources that make up and support your cloud, and you have the ability to very tightly secure said resources. Notice that I say "you have the ability". I'm careful to point out that on-premise clouds do not inherently make your environment secure. If you don't already have a robust security strategy in place within your enterprise, then simply moving to a cloud model will not solve much. That being said, if you do have a comprehensive security strategy in place, one built around customized processes and access rights, then on-premise clouds are likely to make much more sense for you.
Moving beyond the opportunity for customized security controls provided by on-premise clouds, WebSphere CloudBurst delivers additional, unique security features. It starts on the outside with the tamper-resistant physical casing. If a malicious user attempts to remove the casing to get to the inner contents, the appliance is put into a dormant state, and it must be sent to IBM to be reset. "So what!" you say. If the user removes the casing and gets to the contents, couldn't they simply read the contents off the flash memory or hard disks directly, or insert them into another WebSphere CloudBurst Appliance and read them from there? Nope. All of the contents stored on the appliance's flash memory and hard disks are encrypted with a private key that cannot be changed and is unique to each and every appliance.
If you are at all familiar with WebSphere CloudBurst, you know that the appliance dispenses and monitors virtual systems running on a collection of hypervisors. Obviously then, the appliance must remotely communicate with the hypervisors. In order to secure this communication, all information between WebSphere CloudBurst and the hypervisors (and vice versa) is encrypted. This encryption is achieved by using an SSL certificate that is exchanged when a hypervisor is defined in WebSphere CloudBurst. This certificate must be accepted by a user, thus preventing rogue hypervisors from being defined in WebSphere CloudBurst.
Finally, WebSphere CloudBurst provides for the definition of users and user groups with varying permissions and resource access rights in the appliance. You don't have to turn over the keys to your cloud kingdom when you add a user to the appliance. You have the capability to define varying permissions (from simply deploying patterns, to creating them, all the way up to administering the cloud and appliance), and you have the ability to control access to resources (patterns, virtual images, script packages, cloud groups, etc.) at a fine-grained level. These two capabilities combine to allow you to control not only what actions a user can take, but also on which resources they can take those actions.
WebSphere CloudBurst was designed with focus on delivering a secure cloud experience, and I think it hit the mark. I'm sure I didn't address all your WebSphere CloudBurst and security related questions. If you have something specific in mind, leave a comment on the blog or reach out to me on Twitter. I'll do my best to address your question.
When it comes to provisioning and managing WebSphere application environments in a cloud, nothing approaches WebSphere CloudBurst in terms of expertise and instant value. However, I bet there is more to your data center provisioning and management activities than just WebSphere application environments. You probably deploy and manage a wide variety of both IBM and non-IBM software. While some of these activities may be beyond the scope of the WebSphere expertise you get with WebSphere CloudBurst, they fall well within the reach of offerings from IBM Tivoli.
One of the Tivoli offerings that comes to mind in the service delivery automation arena is the Tivoli Service Automation Manager (TSAM). TSAM delivers capabilities to request, deploy, monitor, and manage a broad range of IT services within a cloud environment, in large part by using both virtualization and automation as delivery vehicles. Even better for WebSphere users, you can integrate TSAM and WebSphere CloudBurst to make use of TSAM capabilities in concert with the WebSphere deployment and management expertise delivered by WebSphere CloudBurst. When using these two together, you actually deploy and manage WebSphere CloudBurst patterns directly from the TSAM user interface.
The integration starts by providing information about a target WebSphere CloudBurst Appliance (essentially the location of the appliance and login credentials) within TSAM. After that, you run a discovery process included with TSAM to gather information about patterns on the target appliance. Once you discover the pattern information, you perform one last configuration step, and you are ready to go.
As far as actually initiating a pattern deployment, it works much like other project requests in TSAM. From the TSAM user interface, you create a new project based on a WebSphere CloudBurst pattern. The request goes into the queue, where an administrator can approve or reject the request. This gives a nice touch of workflow governance to WebSphere CloudBurst deployments. If approved, the project request proceeds and TSAM, by way of the WebSphere CloudBurst REST APIs, initiates the deployment of the selected pattern from the appliance. Of course, there is also a means to remove the virtual system directly from the TSAM user interface. You can cancel any WebSphere CloudBurst based project, and if approved by an administrator, TSAM again leverages the WebSphere CloudBurst REST API to trigger the deletion of the virtual system.
The integration of TSAM and WebSphere CloudBurst provides the best of both worlds really. You can use a single portal as a gateway for provisioning and managing a broad range of IT services within a cloud environment, while still leveraging the significant out-of-the-box know-how and value provided by WebSphere CloudBurst for WebSphere environments. Check out a demo of this integration here, and as always, let me know if you have any questions or comments.
A couple of weeks ago, I dropped by the Intel Developer Forum to present a session and listen in on a few others. As always in these types of shows, I learned quite a bit. Most strikingly though, I was reminded of something that is probably quite obvious to many of you: Consumer interest in cloud computing will not be letting up any time soon.
Based on this, and some of the other things I heard at the show, I decided to catch up with fellow IBMer Marc Haberkorn. Marc is an IBM Product Manager and is responsible for IBM Workload Deployer amongst other things. I asked him about IBM Workload Deployer, the competition, and cloud in general. Check out what Marc had to say below:
Me:IBM Workload Deployer is one among many of a growing wave of cloud management solutions. How do you differentiate the focus and business value of it versus the myriad of other solutions out there?
Marc: To sum it up, we offer a combination of depth and breadth. IWD delivers both workload aware management and general purpose management. Workload aware management differentiates IWD from its competition, as it can deliver more value for the set of products for which it has context. There is a set of actions that workload aware management tools can do that is normally left to the user by general purpose management tools. This list includes configuring a middleware server to know its hostname/IP address, configuring multiple middleware servers to know of one another, arranging clusters, applying maintenance, and handling elasticity. By handling more of these activities in the automated flow, there are fewer chances for manual errors and inconsistencies to enter a managed environment.
That said, without infinite resource or time, it’s impossible to deliver this context-aware management for everything under the sun. As such, in order to allow IWD to deliver differentiated value AND allow it to handle a customer's entire environment, we offer a mix of workload-aware management and general purpose management.
Me:VMware is a good example of a company active in the cloud space, and they seem to keep a consistent pace of new product delivery. What do you think of their product development focus?
Marc: I think VMware has built a very compelling set of capability in the virtualization space. I think the main difference between VMware's suite and IBM Workload Deployer is the perspective from which the environments are managed. VMware puts the administrator in the position of thinking about infrastructure from the ground up. The administrator is thinking about virtual images, hypervisors, and scripts. In IBM Workload Deployer, we think about things from the perspective of the app, because that's ultimately what the business cares about. By providing a declarative model through which an application can be instantiated and managed, we feel we deliver a deeper value proposition to clients, through workload-aware management.
Me:The 'one tool to do it all' approach is a popular, if not hard to achieve goal. What is your advice to users when it comes to choosing between breadth and depth for cloud management solutions?
Marc: The advantages of a "one tool to do it all" are many: less integration, more uniformity, less complexity. As such, customers will always prefer a single tool when possible. This is why IBM Workload Deployer has focused on not only providing differentiated, deeper value for common use cases but also providing a way to handle the "everything else." As such, my advice to users is not to choose between breadth and depth - use IBM Workload Deployer which offers both.
Me:To close, I'm curious to know where you think we are heading in the cloud market. What do you think users will be most readily adopting over the next one to two years? Where does the cloud industry need the most innovation?
Marc: I think most users are currently looking at the broad picture of cloud computing, and have been adopting primarily in the private cloud realm. There are several reasons for this. One reason is that many customers have a large set of hardware resources which amount to sunk cost that needs to be leveraged. Another reason is around data security concerns in off-premises clouds, and still another reason is around the human factor of comfort, which has taken time to develop around off-premise cloud models. However, businesses have become increasingly comfortable with various sources of outsourcing in recent years, especially in mission critical areas involving very sensitive data. Just look at IBM's Strategic Outsourcing business, which handles entire IT operations for many large businesses. I think that trend will (and really, has already begun to) continue in the area of cloud computing, and will lead to more public and ultimately hybrid cloud computing adoption. In order to get to hybrid cloud computing, I see much of the focus and innovation being associated with data security, workload portability (across private and public, in a seamless fashion), and license transferability between private and public. When this space reaches fruition, clients will be able to enjoy true elastic economics in a computing model that allows a mixture of owning and renting compute resources and software licenses.
In a recent post, Joe Bohn detailed some of the new capabilities and enhancements that come along with the recently delivered IBM Workload Deployer v3.1. To be sure, there are many valuable new features such as PowerVM support for virtual application patterns, the Plugin Developer Kit, WebSphere Application Server Hypervisor Edition v8, and more. Each of these topics probably merit their own post, but today I want to talk about something I did not mention above. Specifically, I want to talk about the announcements regarding the IBM Image Construction and Composition Tool (ICCT) and what that means for IBM Workload Deployer users.
You may have read an earlier post that I wrote about the ICCT, but allow me a brief overview here. In short, the ICCT enables the construction of custom virtual images for use in IBM Workload Deployer. You use the tool to create virtual images, much like IBM Hypervisor Edition images, and then you can use those custom images (containing whatever content you need) to create your own custom virtual system patterns. The key point about the custom images you create with the ICCT is that they are dynamically configurable. That is, the tool helps you to create the images in such a way that you can defer configuration until deploy time rather than burning such configuration directly into an image. For those of you familiar with virtual image creation, you know this type of 'intelligent construction' is a huge step towards keeping image inventory at a reasonable level.
Okay, enough of a general overview for now. Let's talk about the two new items of note regarding IBM Workload Deployer v3.1 and the ICCT. The first thing you should know is that starting in IBM Workload Deployer v3.1, the ICCT is shipped with the appliance. This means that you do not need to go anywhere else in order to get your hands on the tool to start creating your custom images. You simply log into IBM Workload Deployer and click the download link on the appliance's welcome panel (shown in image below).
Getting your hands on the tool is one piece of the puzzle, but using it is quite another. While the ICCT has been available as an alphaWorks project for some time, that also implies that there has never been official support for the tool. That changes starting with IBM Workload Deployer v3.1. The ICCT is now a generally available product from IBM, and that means that it is fully and officially supported as well. Further, the images you create using the tool are also officially supported for use as building blocks of your IBM Workload Deployer virtual system patterns. For many of you who have been using the ICCT for some time, but have been hesitant to expand use because of the lack of a formal support statement, you should now feel free to charge forward!
I hope this helps clear up exactly what the new Image Construction and Composition Tool announcements that were part of IBM Workload Deployer v3.1 actually mean. I cannot wait to hear about how you all are putting the ICCT to use with IBM Workload Deployer. Finally, don't forget to send us any questions, comments, or other feedback that you may have regarding this or any other new feature in IBM Workload Deployer v3.1!
I hardly ever have a conversation about WebSphere CloudBurst, or generally cloud computing for application middleware, without the topic of databases coming up. Databases are such an important piece of nearly every application middleware environment, so users want to be sure that whatever they do for their application servers, they can also do for the databases on which their applications rely. That is why the capability to deploy DB2 from WebSphere CloudBurst has been around for as nearly as long as the capability to deploy WebSphere Application Server.
Even though DB2 deployment capability has been around for a while, there are still some common misconceptions regarding the offering. First, I have talked to a fair number of users who are under the impression that we only offer a trial version of DB2 for deployment via WebSphere CloudBurst. While that was true for the first few months of the offering, that is no longer the case. For several months now, a fully supported, 64 bit, production-ready DB2 image has been ready for use in WebSphere CloudBurst. If you were waiting for a DB2 image that you could go live with, wait no longer!
The other misconception, or rather, point of confusion, arises from the fact that the DB2 image for WebSphere CloudBurst is not, by name, a Hypervisor Edition image. I can assure you that is in name only. The DB2 image looks like and behaves like any other IBM Hypervisor Edition image once you load it into the appliance. You can use it to build and deploy patterns in the same way you use other images in WebSphere CloudBurst. You may just have trouble finding it if you search for 'DB2 Hypervisor Edition' as opposed to 'DB2 Server for WebSphere CloudBurst Appliance.'
Instead of going into further detail, I want to refer you to a blog entry from a fellow IBMer, Leon Katsnelson. Leon is a program director for DB2 and is responsible for the team that develops and delivers the DB2 image for WebSphere CloudBurst. In his most recent post, he provides a nice overview of the image and gives good information for those looking to use DB2 and WebSphere CloudBurst (there is also a bit on cloud computing at the beginning that I think is spot on). Check out Leon's post, and let us know what you think!
When it comes to managing users and user groups within WebSphere CloudBurst, you can choose to manage all aspects of those resources within the appliance. Mainly this means that you can define and store user information (including login passwords) within the appliance, and you can define and maintain user groups and their associated membership list on the appliance. While you can do this and be sure that your information is extremely secure, you may instead want to integrate with an existing LDAP server that has some of this user and user group data. WebSphere CloudBurst certainly allows you to integrate with LDAP servers, but what does that mean for you?
For starters, when you integrate WebSphere CloudBurst with an LDAP server and enable the LDAP authentication feature, you no longer specify password information when defining users of the appliance. When users login, the password they specify will be authenticated against information stored in the LDAP server. Naturally, if you add a new WebSphere CloudBurst user with LDAP authentication enabled, that user must be defined in the LDAP server. Otherwise, WebSphere CloudBurst will prevent you from adding the user because it has no way to authenticate that person.
From a user groups standpoint, integrating with LDAP means you can no longer modify user group membership. User membership in groups is determined by information in the LDAP server. As a result, the same rule concerning adding new users applies when adding new user groups: You cannot define new user groups that do not exist in the LDAP server.
If you want to take a look at what LDAP integration looks like with WebSphere CloudBurst, I put together a short video. Let me know what you think.
In a previous post, entitled Layers of Elasticity, I talked about the new dynamic virtual machine operations in WebSphere CloudBurst. Specifically, I showed you how to use the WebSphere CloudBurst web console to add more virtual machines (nodes) to an existing virtual system. Well, you can do this with the WebSphere CloudBurst command line interface as well.
First, let's assume I start off with a basic WAS ND environment represented by the pattern below:
When I deploy this pattern in WebSphere CloudBurst, I end up with two virtual machines: one for the deployment manager with an embedded IHS instance, one for my custom node federated into the cell. After deployment, suppose I want to use the CLI to interact with this virtual system. Assuming the name of my virtual system is Cluster, I can view my custom node virtual machine with the following CLI code:
The call to the clone function above takes care of creating a new profile and federating the new node into the cell. In addition, WebSphere CloudBurst automatically invokes any script packages from the source virtual machine marked to run at virtual system creation. All because of this single line of code!
The WebSphere CloudBurst CLI is a powerful interface that enables you to automate the function of the appliance. Check it out, become familiar with it, and make WebSphere CloudBurst processes a seamless part of your overall data center management approach.
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
Yesterday, we kicked off a WebSphere in the Clouds campaign designed to connect you with IBMers that can help you to leverage WebSphere solutions to build clouds. The campaign consists of webcasts, podcasts, live Q&A sessions, and online JAMs. You can listen to replays and sign up for upcoming events by visiting the Global WebSphere Community website.
Next week, the campaign delivers a series of podcasts that discuss the WebSphere technologies that form the building blocks of clouds. These podcasts will discuss both the business and technical aspects of these solutions, and they will cover topics like application infrastructure in the cloud, policy-based workload management using application virtualization, hybrid cloud integration, and more. Over the past few days, I had the opportunity to catch up with the various presenters of these podcasts to ask them a few questions about their solutions. These interviews provide a nice sneak peak at what is coming in the podcasts, and I will be posting them here in the coming days.
To kick things off, I'm posting a video interview with Marc Haberkorn. Marc is the WebSphere Product Manager for WebSphere CloudBurst, WebSphere Application Server Hypervisor Edition, and WebSphere Virtual Enterprise. My colleague, Ryan Boyles, caught up with Marc and got his thoughts on how these solutions enable virtualization and automation for your cloud environments. Enjoy!
Over the past several months industry focus on cloud computing seems to have only intensified. Within IBM and for the purposes of this blog, WebSphere, there have been several announcements and offerings that indicate our commitment and belief in the cloud computing approach.
To further highlight WebSphere's focus and offerings in the cloud computing realm, we are embarking on a "WebSphere in the Clouds" campaign during the months of September and October. Our intent is to virtually deliver information about our cloud strategy and offerings directly from the experts to you, our WebSphere users.
The event will be kicked off by WebSphere's Director of Product Management, Kareem Yusuf, on September 23rd from 9-10 EDT. Kareem will talk about cloud computing in the enterprise, and its unique relationship to SOA thoughts and principles. In addition, he'll give an overview of what WebSphere has been doing in the cloud computing space. This will be followed by sessions from technical experts that detail WebSphere offerings in both the public and private clouds, as well as sessions that discuss enablers of application and application infrastructure elasticity.
To find out more about the "WebSphere in the Clouds" campaign, you can check out the main announcement page. To sign up for the series of virtual events visit the registration page. We hope you will join us for the series of webcasts to learn all about WebSphere's work in the clouds.
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
A recent announcement signaled the coming release of WebSphere CloudBurst 1.1. This new release of the WebSphere CloudBurst Appliance delivers enhancements to all phases of the lifecycle of virtualized WebSphere Application Server environments. Let's take a closer look at a few of these updates.
First and foremost, WebSphere CloudBurst 1.1 delivers support for the PowerVM platform. You can now deploy patterns to create virtualized WebSphere Application Server environments running in a PowerVM environment on pSeries servers. Among other things, this is enabled by a new version of the WebSphere Application Server Hypervisor Edition. This new version of the virtual image contains an AIX operating system and has been specifically bundled to allow it to be activated on the PowerVM hypervisor. From a user standpoint, building, deploying, and maintaining WebSphere Application Server environments is done from the same console with the same look and feel regardless of the target platform. Check out this demo to see WebSphere CloudBurst and PowerVM in action.
In addition to support for PowerVM environments, WebSphere CloudBurst 1.1 will also provide a trial edition of a DB2 virtual image. You can import this image into your WebSphere CloudBurst catalog and then use it to build and deploy DB2 environments. This allows you to, from the same centralized interface, deploy and integrate both your application and data environments in your private cloud. Check out this demo for more information on the new DB2 trial virtual image for WebSphere CloudBurst.
One other cool feature I want to point out delivers an enhancement to the use of script packages in WebSphere CloudBurst. In this new version of the appliance, you have more control around when script packages you include in a pattern are executed. Previously, these were executed toward the end of pattern deployment once all the necessary WebSphere Application Server components had been started. While that is still the default behavior, you can also elect to have the script package invoked when the virtual system is deleted, or you can choose the invocation to be user-initiated meaning that you decide when and how many times your script runs. To check out a pretty handy use case for this feature, watch the demo here.
These aren't the only new features and enhancements delivered in WebSphere CloudBurst 1.1. Stay tuned for more demonstrations and more words about these new features and when and why you would want to use them. In the meantime, if you have any questions be sure to stop by our forums.
In keeping with the impressive release pace, WebSphere CloudBurst 126.96.36.199 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 188.8.131.52, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 184.108.40.206 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 220.127.116.11, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 18.104.22.168, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
When I talk to users familiar with both WebSphere CloudBurst and the IBM Systems Director VMControl offering, there is sometimes a bit of confusion. It is not surprising. Both WebSphere CloudBurst and IBM Systems Director VMControl allow users to create and manage virtualized environments. That leads us to an oft-asked question: What is the difference between WebSphere CloudBurst and IBM Systems Director VMControl?
The simple answer is that the difference in the two offerings is the degree to which they are purpose-built. IBM Systems Director VMControl equips users with broadly applicable capabilities to create and manage environments consisting of virtual machines. These capabilities extend to PowerVM, z/VM, VMware, and Microsoft Hyper-V hypervisor platforms. IBM Systems Director VMControl is not necessarily knowledgeable about the software running in the virtual machine, but it does allow the user to manage that asset effectively.
Compare and contrast that with the capabilities provided by WebSphere CloudBurst. The appliance also enables users to create and manage environments consisting of virtual machines. The difference is that WebSphere CloudBurst is purpose-built to provide you with the ability to create, deploy, and manage virtualized WebSphere environments quickly and easily.
What does that mean? Well, on one hand it means that WebSphere CloudBurst does not treat the virtual machines it creates like a black box. In fact, it knows quite a bit about the software running inside those machines, and provides users with out-of-the-box configuration and administration capabilities for said software. WebSphere CloudBurst knows how to interact with the software in the virtual machines to do things like federate WebSphere nodes into a cell, create application server clusters, configure environments for optimal performance, apply fixes and upgrades, and more. The best part is you do not need to supply any of your own scripts to do this. In short, the appliance ships with WebSphere intelligence.
Beyond this WebSphere intelligence, WebSphere CloudBurst enables users to create customized WebSphere environments (from the operating system up) and codify those customized environments in the form of patterns. These patterns, which represent your very own WebSphere application environments, enable you to deploy your applications rapidly, repeatedly and with extremely consistent results. In addition, the appliance allows you to define varying roles for users, each of those mapping to traditional data center responsibilities (i.e. customizing the operating system, building application infrastructure, carrying out middleware customizations, etc.). Again, WebSphere CloudBurst was purpose-built with WebSphere environments in mind.
It is not all about comparing and contrasting WebSphere CloudBurst and IBM Systems Director VMControl. In the case that you are using WebSphere CloudBurst to create and manage virtualized WebSphere environments on top of the PowerVM hypervisor platform, IBM Systems Director VMControl is actually a required component. In this scenario, the two offerings are complementary. WebSphere CloudBurst communicates with IBM Systems Director VMControl in order to create and configure the virtualized WebSphere environment requested by the user. This image below depicts how the two products work in conjunction in a PowerVM environment.
I hope this helps to shed light on how WebSphere CloudBurst compares to, contrasts with, and complements IBM Systems Director VMControl. Feel free to reach out to me on the blog or on Twitter (@damrhein) with any questions I did not answer here.
The 1.1.1 version of WebSphere CloudBurst is now available on the IBM support site, and you can read a bit about it here. I have not blogged about each and every point release of WebSphere CloudBurst here, but this particular one is significant. The 1.1.1 release adds support for IBM's z/VM hypervisor platform as a deployment target.
Quite simply this means that you can now create virtualized WebSphere application environments on the z/VM platform using WebSphere CloudBurst. This starts by first defining target hypervisors, instances of Linux Master Systems, that WebSphere CloudBurst can communicate with to setup virtual machines on z/VM. Coupled with support for the z/VM infrastructure components, there is a new version of the WebSphere Application Server Hypervisor Edition virtual image. While this new image contains the same basic components as the previous hypervisor edition images, it is packaged for the z/VM platform, and it includes a zLinux operating system.
Once you upgrade to WebSphere CloudBurst 1.1.1, you can define your z/VM infrastructure and use the new WebSphere Application Server Hypervisor Edition image to build custom patterns targeted for the z/VM platform. I put together a demonstration that provides a very brief overview of these new capabilities. As always, please reach out if you have any questions about this or any other WebSphere CloudBurst topic.
I want to stay in the realm of the deployment process for our next frequently asked question regarding the WebSphere CloudBurst Appliance.
The ability to quickly deploy entire WebSphere Application Server cells (anything from single node cells, to multi-node clustered cells) is a hugely compelling feature of the appliance. Instead of spending days or hours deploying a WebSphere Application Server cell, users can deploy these in a matter of minutes (less than twenty minutes for clustered environments)!
For the most part, WebSphere CloudBurst patterns represent entire cells. This includes management parts (AdminAgent, DeploymentManager), managed parts (custom nodes), and proxy parts (IHS). When you deploy a pattern, the result is a complete and fully functional WebSphere Application Server cell running in your private cloud.
So, now that you have a complete cell out in your cloud, what happens if you need to add more nodes? If the the user-demand for the applications on your cell has exceeded the initial topology, can you use WebSphere CloudBurst to add more cells? Sure you can!
In short, this involves creating a pattern that contains only a custom node part, and then at deploy time, providing information about the existing cell. WebSphere CloudBurst then takes over the deployment of that custom node and federates the node into the existing cell based on the information supplied about that cell. I won't go into an entire explanation here, because I think the demo I put on our YouTube channel explains it pretty well.
In my experience with the WebSphere Application Server, this represents a much more seamless and automated process for deploying new nodes into an existing cell than what exists outside of WebSphere CloudBurst today. Of course, we value your comments and feedback above all else. So let us know what you think!
Over the last three posts I've been discussing a few of the most frequently asked questions regarding the WebSphere CloudBurst Appliance. I'd like to wrap up today with a fourth and final installment.
If you have read some of my entries before, or if you have read any of our WebSphere CloudBurst articles on IBM's developerWorks, then you know that the appliance brings extreme simplification and safety to applying fixes and service level upgrades to running WebSphere Application Server virtual systems. Users select a virtual system, choose a fix or service level upgrade, and then WebSphere CloudBurst drives the application of the fix or upgrade to the system. Before applying the fix or upgrade, the appliance takes a snapshot of the virtual system, and users can simply click a button to roll back to the previous state if the process produces undesired results.
This is a pretty strong value add to WebSphere Application Server management and one that our users typically immediately understand. Almost always though, after users see this they are curious about another aspect of rolling out fixes and upgrades in WebSphere CloudBurst. In particular, they want to know how they ensure that all subsequent deployments (after applying the fix to a specific virtual system) can be ensured of having the correct fixes and service levels.
The answer to this inquiry is that there are a couple of different ways to achieve this, and it depends on what you are try to accomplish and your preferences. For instance, if you want to make sure all of your subsequent deployments have a particular interim fix, you will likely go the route of image extension. First, you pick the WebSphere Application Server Hypervisor Edition image in your catalog to which the fix applies. Next, you extend that image, and once a virtual machine based off the image is accessible, you use existing WebSphere Application Server tools (Update Installer) to apply the fix. After the fix has been applied, you can capture the updated image and then use it as the basis for patterns created from that particular version of the WebSphere Application Server.
On the other hand, if you are looking to ensure subsequent deployments are based on a new level of the WebSphere Application Server, your process will be a bit different. First you would load a new WebSphere Application Server Hypervisor Edition image (based on the new level of WebSphere Application Server) into your WebSphere CloudBurst catalog. Then you would select any of your customized patterns you wanted to upgrade to the new level, clone that pattern, and simply select the new image as the basis for the pattern. All of your other customizations are preserved. Really, it's that simple!
I hope that over the last month I have answered some of the more common questions about WebSphere CloudBurst. At any point if you have any questions feel free to email me or leave a comment right here on the blog.
It's about the time of year when we all look back and try to determine exactly how we spent the past twelve months. Whether we do it because we have to as part of year-end job reviews or because we like to take stock in what we've done and figure out where to improve next year, it's a time for reflection and recall. For me, this exercise made me take a look at various things we have done to deliver WebSphere CloudBurst technical collateral (articles, demos, blogs, etc.) in 2009.
For all practical purposes, our mission and efforts for such technical collateral for WebSphere CloudBurst started when it was announced at Impact in May of this year. Though there was certainly some preparatory work being done on this front, there was nothing we could really push to the public until after the announcement, and in some cases even after the appliance's release in June. Given that most of the content was produced over a six month stretch, I really think we put forth a strong effort, and I hope that this technical material has helped to both raise awareness of and educate users on the WebSphere CloudBurst Appliance.
Seeing as I already went back and rounded up this content, I thought I'd provide you a centralized look at the information. To start, I accounted for the articles that we published to the IBM developerWorks site over the six month stretch. All together I counted 8 articles and a special column entry:
As you can see the articles cover quite a bit of content and range from general level overview articles to technical in-depth "how-to" style articles. In general they seem to have been received well with over 26,000 views to this point. Our goal is to keep the pace up for 2010, and we already have a few articles on our plate for early in the new year (including an overview of what's new in WebSphere CloudBurst 1.1).
Another main medium we utilized to spread the word about WebSphere CloudBurst was YouTube. On our YouTube channel at http://youtube.com/websphereclouds, we currently have 17 different videos that demonstrate how to use certain features of the WebSphere CloudBurst Appliance. Though I think each demo provides value depending on exactly what a viewer is looking for, 3 of them really stick out for me.
Check out our videos if you get a chance. We've made an effort to keep them as short as possible while still providing value to viewers.
We have some WebSphere CloudBurst content spread around other places as well including this blog and my personal blog. Over the next few weeks we'll be taking a look at what worked and didn't work with respect to getting information out to the public. Of course at any time we very much appreciate your feedback on how you like to see content delivered because you are our target audience! If you have a comment, idea, or suggestion, leave a comment on the blog or send me a tweet to @WebSphereClouds.