As fast as the Impact conference arrived is about as fast as it is disappearing in our collective rearview mirror. It seems like a blur. In a word, the conference was... exhausting! In other words, it was informative, exciting, and illuminating. I hope that many of you had a chance to make it out there, and I hope more of you make it to Impact in 2013.
For those of you familiar with the conference, you know that it is typically a launching ground for new product versions and altogether new products. This year was certainly no different with the launch of the new version of WebSphere Application Server (8.5), the new and improved IBM Business Process Manager and IBM Operational Decision Manager, a new version of WebSphere eXtreme Scale (8.5), and numerous updates across the messaging and connectivity stack. While I encourage you to follow up on all of these important announcements, they are not what I am going to focus on today. Instead, I am going to focus on the new addition to the IBM family that got plenty of attention this year: IBM PureApplication System.
Joe recently touched on this new offering, so I won't get into an exhaustive overview. To put it briefly, IBM PureApplication System is an expert integrated system. What does that mean? First and foremost it means that it is a system -- a whole. It is an integrated platform of hardware and software, optimized and tuned for running transactional web and database workloads. I do not mean that it is a system of software that we pre-install on off-the-shelf hardware. Rather, it is the result of hardware and software engineers across IBM working together to build a system that is expert at what it does. More than just the web application and database software though, IBM PureApplication System also contains pre-installed and pre-configured management software that delivers a soup to nuts (hardware to application) single pane of glass for managing the entire system. I could go on and on, but again that's not my purpose here. I encourage you to check out the new IBM PureSystems web page for more information and some pretty cool videos.
For those of you that take a look at IBM PureApplication System you will quickly find that the notion of pattern-based deployments (something I have talked about at length on this blog) plays a key role in the new system. In fact, the same virtual system and virtual application pattern constructs that you have come to know in IBM Workload Deployer are front and center in IBM PureApplication System as well. In the new system, you can build custom virtual system and virtual application patterns, deploy them to your cloud, and then manage them over time. If you are familiar with the IBM Workload Deployer user interface, you will likely find yourself immediately familiar with the interface of IBM PureApplication System. Given all of that, if you are like many of the users I talked to at Impact and since, you probably have some questions as to IBM Workload Deployer and this new system. Most commonly, I get these two questions: "What does this mean for the IBM Workload Deployer product?" and "How do I know when to use IBM PureApplication System versus IBM Workload Deployer?" Let me do my best to address those questions.
In terms of the impact of the IBM PureApplication System on the IBM Workload Deployer offering, I can only view it in one way: affirmation. As I said above, IBM PureApplication System puts the mode of pattern-based deployments front and center, and further affirms that this kind of approach is crucial to the evolution of application delivery and management. Those of you familiar with IBM Workload Deployer or its predecessor WebSphere CloudBurst know that we have been talking about patterns for years. Rest assured we will continue to talk about patterns and solutions for building, deploying, and managing them. As it stands, we have at least three ways for you to build, deploy, and manage patterns: IBM SmartCloud Application Services, IBM Workload Deployer, and IBM PureApplication System. As you can see, options for consuming patterns have only increased since the initial launch of WebSphere CloudBurst. Furthermore, if you were at Impact, you know that we have a vibrant and vocal community of IBM Workload Deployer users, and I hope to see that community continue to grow! As I see it, the core technology of IBM Workload Deployer is becoming our 'operating system' for cloud platform management.
The question of when to use IBM Workload Deployer or when to use IBM PureApplication System is one whose answer is a bit more nuanced and not something one can or should try to definitively answer in a blog post. One thing I do suggest though is that when evaluating these two technologies, it is important to acknowledge that they have different business value propositions. Sure they share common core technology in terms of building, deploying, and managing pattern-based environments, but beyond that they diverge a bit. Remember, IBM PureApplication System is, well a system. It is the hardware, software, and management technology you need to run your middleware application workloads. It is pre-built and pre-integrated to the point that it only requires you to roll it into your datacenter, hook it up to your network, and do some one time configuration. The aim for the duration between receipt of the system to up and running with your first deployment is four hours, and if you were at Impact you saw an amusing video with the chief architect (Jason McGee) that proves this claim.
IBM Workload Deployer is fundamentally different in terms of how you consume it and how it integrates with your infrastructure. Most notably, IBM Workload Deployer does not include optimized hardware (servers, storage, networking) for running your workloads or a single point of management for everything from hardware to applications. To use IBM Workload Deployer you attach it to your network and point it at existing virtualized servers. Simply put, IBM Workload Deployer assumes you have existing, under-utilized hardware that you can get more out of with the intelligent deployment and management approach the appliance delivers. While you do not get the pre-integrated and optimized system of hardware plus software, you do get the flexibility to use your existing infrastructure.
As you can see, there are similarities (patterns) and differences (whole system vs. management system), and the result is a pretty different set of value propositions. The key in evaluating these technologies is that you do so with a crisp understanding of your current needs AND your future plans for growth and evolution. I know this kind of advice is a bit generalized, but I hope the differences I discussed above help you to at least understand the capabilities of the two different offerings. As always, if you have any comments or questions, please reply to the post!
In the previous post Dustin shared a great video demonstrating the value of the IBM Image Construction and Composition Tool that is now delivered with IBM Workload Deployer V3.1. This is certainly one of the key new features of IBM Workload Deployer V3.1. However, there are also a number of other compelling enhancements and features that we would like communicate.
I created the attached video to highlight some of these features included in new Workload Deployer release. The video uses the web console to highlight some of the features and capabilities, giving a brief introduction for each one. Without going into a lot of depth, I think it gives a nice overview. This may be especially helpful if you already have Workload Deployer v3.0 and want to see the value you will get when you upgrade to Workload Deployer v3.1. Check it out.
We believe that these new features make IBM Workload Deployer V3.1 an even better solution for your private cloud needs. Please let us know what you think.
Lately Joe and I have been pretty vocal about bringing up the new IBM Image Construction and Composition Tool capabilities in IBM Workload Deployer v3.1. While writing about such new capabilities is always good, I think seeing is believing. In that light, I hope you will take a look at the recent demo I put together that shows how to use the Image Construction and Composition Tool with IBM Workload Deployer v3.1!
When IBM Workload Deployer v3.0 rolled around, the appliance introduced the concept of shared services. These were services that a cloud administrator could launch into the cloud infrastructure defined to IBM Workload Deployer, and use to serve a number of different application deployments. There were, and continue to be, two main shared services: a proxy service and a cache service. The shared proxy service does pretty much what you may guess. It provides request routing capabilities across multiple different instances of multiple different applications, thereby providing a centralized resource that encapsulates this basic need in an application environment. You can probably also guess what the caching service does. It caches things! Specifically, in IBM Workload Deployer v3.0 it provided in-memory caching of HTTP sessions, thus ensuring high availability of data stored in those sessions.
Undoubtedly, the ability to make HTTP session data fault tolerant is extremely critical in any application environment, cloud-based environments included. However, the applicability of a shared cache service is much further reaching, and in IBM Workload Deployer v3.1, we are starting to open this service up to your applications. What does this mean to you? Quite simply it now means that you can access this cache directly from your application code. If you are familiar with WebSphere eXtreme Scale or the DataPower XC10 Caching Appliance, then you know exactly what I mean. You can use the WebSphere eXtreme Scale ObjectGrid API to insert, read, update, and delete entries that exist in the in-memory cache. The underlying cache technology is based on the same code that powers WebSphere eXtreme Scale and DataPower XC10, so you can be sure that your cache is scalable, fault tolerant, responsive, and otherwise able to meet the needs of your application.
As I hope you find to be the case with many IBM Workload Deployer capabilities, this is a superbly simple capability to leverage. When you deploy virtual application patterns based on the IBM Workload Deployer Pattern for Web Applications, the capability is simply there. The underlying runtime that is serving your application is automatically augmented with the capabilities necessary so that your applications can connect to and utilize the deployed caching service. It is also worth pointing out that you can utilize the caching capabilities provided by this shared service for applications and application infrastructure that you deploy via virtual system patterns as well. You can either choose to augment the WebSphere Application Server environment with the XC10 Feature Pack (a deploy-time option for virtual system patterns built on WebSphere Application Server Hypervisor Edition v8), or you can configure WebSphere Application Server as you always would when integrating with a WebSphere eXtreme Scale environment or a DataPower XC10 Appliance.
What's the real benefit to all of this you ask? Well, when you use the shared caching service, you get the benefits of a distributed, in-memory, extremely scalable cache without having to deal with too much setup or administration. You simply tell IBM Workload Deployer how many resources you want to dedicate to your cache, and deploy the shared service. IBM Workload Deployer takes care of the details, including scaling in and out the cache to meet the needs of the system. On top of all of this, there is also an option to configure 'Next to the Cloud' caching. If you currently own DataPower XC10 appliances, you can make those available to virtual application pattern deployments (this was already possible with virtual system patterns) by simply providing details of the location of the appliance collective in question.
Put simply, setting up, administering, and utilizing an object caching service for your applications has never been easier. Check it out and let us know what you think!
In a recent post, Joe Bohn detailed some of the new capabilities and enhancements that come along with the recently delivered IBM Workload Deployer v3.1. To be sure, there are many valuable new features such as PowerVM support for virtual application patterns, the Plugin Developer Kit, WebSphere Application Server Hypervisor Edition v8, and more. Each of these topics probably merit their own post, but today I want to talk about something I did not mention above. Specifically, I want to talk about the announcements regarding the IBM Image Construction and Composition Tool (ICCT) and what that means for IBM Workload Deployer users.
You may have read an earlier post that I wrote about the ICCT, but allow me a brief overview here. In short, the ICCT enables the construction of custom virtual images for use in IBM Workload Deployer. You use the tool to create virtual images, much like IBM Hypervisor Edition images, and then you can use those custom images (containing whatever content you need) to create your own custom virtual system patterns. The key point about the custom images you create with the ICCT is that they are dynamically configurable. That is, the tool helps you to create the images in such a way that you can defer configuration until deploy time rather than burning such configuration directly into an image. For those of you familiar with virtual image creation, you know this type of 'intelligent construction' is a huge step towards keeping image inventory at a reasonable level.
Okay, enough of a general overview for now. Let's talk about the two new items of note regarding IBM Workload Deployer v3.1 and the ICCT. The first thing you should know is that starting in IBM Workload Deployer v3.1, the ICCT is shipped with the appliance. This means that you do not need to go anywhere else in order to get your hands on the tool to start creating your custom images. You simply log into IBM Workload Deployer and click the download link on the appliance's welcome panel (shown in image below).
Getting your hands on the tool is one piece of the puzzle, but using it is quite another. While the ICCT has been available as an alphaWorks project for some time, that also implies that there has never been official support for the tool. That changes starting with IBM Workload Deployer v3.1. The ICCT is now a generally available product from IBM, and that means that it is fully and officially supported as well. Further, the images you create using the tool are also officially supported for use as building blocks of your IBM Workload Deployer virtual system patterns. For many of you who have been using the ICCT for some time, but have been hesitant to expand use because of the lack of a formal support statement, you should now feel free to charge forward!
I hope this helps clear up exactly what the new Image Construction and Composition Tool announcements that were part of IBM Workload Deployer v3.1 actually mean. I cannot wait to hear about how you all are putting the ICCT to use with IBM Workload Deployer. Finally, don't forget to send us any questions, comments, or other feedback that you may have regarding this or any other new feature in IBM Workload Deployer v3.1!
If you follow this blog often, you know that from time to time I like to post frequently asked questions. Well, it's been a while since I have done that, and since then I have added some new questions to my list -- along with some regulars. Take a look below, and if I don't answer your question feel free to leave a comment!
Can IBM Workload Deployer deploy software that is not IBM software? Yes. You can use one of the included images as a springboard and customize them with your own software via extend and capture. Additionally, you can use the IBM Image Construction and Composition Tool (I'm getting ahead of myself here) to create your own custom images from the ground up and use those within IBM Workload Deployer.
Can I use VMotion for the systems I deploy with IBM Workload Deployer? Yes. IBM Workload Deployer has tolerated the use of VMotion since the WebSphere CloudBurst days (see the Additional Considerations section on this page for more information). IBM Workload Deployer v3 introduced the notion of virtual machine mobility initiated directly from the appliance. This capability takes advantage of VMotion in the case of VMware-based cloud environments.
Can IBM Workload Deployer deploy just a base operating system? Yes. IBM Workload Deployer v3 introduced a base operating system image that contains 64-bit Red Hat Enterprise Linux. Internally, IBM Workload Deployer uses this as the foundation on top of which virtual application patterns are deployed. You can use it to deploy virtual machines containing just the base OS, or you can customize it to deploy software of your choosing. (As an aside, IBM Workload Deployer v3.1 will include a base operating system image for AIX)
Can I automate the process of calling/using IBM Workload Deployer? Yes. IBM Workload Deployer is built to fit a specific need -- creating and managing a cloud of middleware and middleware-based workloads. In that light, it would be a shortcoming if IBM Workload Deployer did not to fit well into more holistic or enterprise-wide cloud management systems. The REST API and CLI allow you to automate the use of IBM Workload Deployer, thereby allowing it to be mashed up into other processes.
Can I group two appliances together for high availability? Yes. IBM Workload Deployer v3.1 introduces the ability to configure appliances in a master/slave setup. You can connect two appliances, allow them to share a floating IP address, and be confident that data is continuously replicated between the two. If one appliance fails, the other appliance picks up the floating IP ensuring continuous service.
Are images created using the Image Construction and Composition Tool supported for use within IBM Workload Deployer? Yes. Part of the new IBM Workload Deployer 3.1 announcement was a statement of support for using images created by the Image Construction and Composition Tool as a component of your virtual system patterns. This is a very important enhancement as it allows you to extend the set of content deployed by IBM Workload Deployer while being sure that you are operating within the boundaries of intended use.
Can I use IBM Workload Deployer to provision to public clouds? No... and yes. If you install an IBM Workload Deployer appliance in your datacenter, you cannot use it to deploy to a public cloud environment. However, you may have recently heard about the IBM SmartCloud Application Services portfolio. IBM has announced that the pattern-based provisioning that one gets with IBM Workload Deployer will also be available as part of this portfolio. This means that you will be able to build and deploy patterns using a service hosted on the IBM SmartCloud. Further, your deployed systems will run on the IBM SmartCloud. Check out this demo for more information.
** IBM Workload Deployer 3.1 firmware is available on 11/18.
One of the things that often comes up at some point in IBM Workload Deployer conversations is the notion of self-service access. Specifically, users want to know what the appliance provides that enables them to allow various teams in their organization to directly deploy the middleware environments they need. In other words, they want to use IBM Workload Deployer to tear down the traditional barriers that exist between those that request the environment and those that fulfill said request. Now, as we begin to elaborate on this notion, it becomes quickly apparent that in order to effectively enable self-service, IBM Workload Deployer must deliver a few things.
First, IBM Workload Deployer must provide the means to define users with various levels of access. Second, IBM Workload Deployer must provide the means to define resource access at a fine-grained level to different users and groups of users. Check and check. The appliance has been doing this since the beginning of WebSphere CloudBurst. Without those two things, the conversation of self-service access would end pretty quickly. However, there is a final capability that is equally important: IBM Workload Deployer must deliver a means to limit resource consumption at a fine-grained level.
In IBM Workload Deployer there are a couple of ways to achieve this. First, you could define multiple cloud groups and allow access to those groups in a way that maps directly to resource entitlements. While that may work in some situations, others call for even more granularity. You may want to allow multiple different users or groups to access a cloud group, but you may want to allow different consumption limits for each of these groups. In this situation, you can take advantage of environment profiles and a new option when defining users of IBM Workload Deployer.
Consider the case that you have a group of developers and you want to limit their consumption of memory in the cloud. First, you start by defining your development users and for each you select Environment Profile Only as the value for the Deployment Options field.
By selecting the above value for the deployment options of a user, you restrict that user to only deploying via an environment profile as opposed to general cloud group deployments. After defining all of your development users, you may choose to organize them into a user group for easier management. At that point, you can define environment profiles and determine which ones your developers should have access to using the Access granted to field of the profile.
Within the environment profile, you can define resource consumption limits for compute resource and software licenses. For instance, you can define a limit on the amount of virtual memory consumed by all deployments using the profile. It is important to note that the limit is cumulative for ALL deployments that use the profile.
Now that all of the controls are in place, consider the deployment process for one of your development users. They pick a virtual system pattern, click the deploy icon and begin to configure the pattern for deployment. In the Choose Environment section of the deployment dialog, your development user will only be able to select the Choose profile option for deployment. Further, they will only be able to deploy using the environment profiles to which they have access.
After the deployment completes, a look at the Environment limits section in the profile shows the current usage totals.
Now suppose another development user, or even the same one, comes along and attempts to deploy another virtual system pattern even though the profile limits have already been reached. The user can initiate the deployment, but they will get a near immediate failure owing to the fact that they would exceed consumption limits if the deployment were allowed to proceed.
The same kind of enforcement occurs regardless of the resource limit type. You can use this approach to limit the consumption of CPU, virtual memory, storage, or software licenses among the various different users or groups of users you define in IBM Workload Deployer. If you combine fine-grained resource consumption limits with varying permissions and fine-grained access, I think you are on the road to truly enabling self-service in the enterprise.
A couple of weeks ago, I dropped by the Intel Developer Forum to present a session and listen in on a few others. As always in these types of shows, I learned quite a bit. Most strikingly though, I was reminded of something that is probably quite obvious to many of you: Consumer interest in cloud computing will not be letting up any time soon.
Based on this, and some of the other things I heard at the show, I decided to catch up with fellow IBMer Marc Haberkorn. Marc is an IBM Product Manager and is responsible for IBM Workload Deployer amongst other things. I asked him about IBM Workload Deployer, the competition, and cloud in general. Check out what Marc had to say below:
Me:IBM Workload Deployer is one among many of a growing wave of cloud management solutions. How do you differentiate the focus and business value of it versus the myriad of other solutions out there?
Marc: To sum it up, we offer a combination of depth and breadth. IWD delivers both workload aware management and general purpose management. Workload aware management differentiates IWD from its competition, as it can deliver more value for the set of products for which it has context. There is a set of actions that workload aware management tools can do that is normally left to the user by general purpose management tools. This list includes configuring a middleware server to know its hostname/IP address, configuring multiple middleware servers to know of one another, arranging clusters, applying maintenance, and handling elasticity. By handling more of these activities in the automated flow, there are fewer chances for manual errors and inconsistencies to enter a managed environment.
That said, without infinite resource or time, it’s impossible to deliver this context-aware management for everything under the sun. As such, in order to allow IWD to deliver differentiated value AND allow it to handle a customer's entire environment, we offer a mix of workload-aware management and general purpose management.
Me:VMware is a good example of a company active in the cloud space, and they seem to keep a consistent pace of new product delivery. What do you think of their product development focus?
Marc: I think VMware has built a very compelling set of capability in the virtualization space. I think the main difference between VMware's suite and IBM Workload Deployer is the perspective from which the environments are managed. VMware puts the administrator in the position of thinking about infrastructure from the ground up. The administrator is thinking about virtual images, hypervisors, and scripts. In IBM Workload Deployer, we think about things from the perspective of the app, because that's ultimately what the business cares about. By providing a declarative model through which an application can be instantiated and managed, we feel we deliver a deeper value proposition to clients, through workload-aware management.
Me:The 'one tool to do it all' approach is a popular, if not hard to achieve goal. What is your advice to users when it comes to choosing between breadth and depth for cloud management solutions?
Marc: The advantages of a "one tool to do it all" are many: less integration, more uniformity, less complexity. As such, customers will always prefer a single tool when possible. This is why IBM Workload Deployer has focused on not only providing differentiated, deeper value for common use cases but also providing a way to handle the "everything else." As such, my advice to users is not to choose between breadth and depth - use IBM Workload Deployer which offers both.
Me:To close, I'm curious to know where you think we are heading in the cloud market. What do you think users will be most readily adopting over the next one to two years? Where does the cloud industry need the most innovation?
Marc: I think most users are currently looking at the broad picture of cloud computing, and have been adopting primarily in the private cloud realm. There are several reasons for this. One reason is that many customers have a large set of hardware resources which amount to sunk cost that needs to be leveraged. Another reason is around data security concerns in off-premises clouds, and still another reason is around the human factor of comfort, which has taken time to develop around off-premise cloud models. However, businesses have become increasingly comfortable with various sources of outsourcing in recent years, especially in mission critical areas involving very sensitive data. Just look at IBM's Strategic Outsourcing business, which handles entire IT operations for many large businesses. I think that trend will (and really, has already begun to) continue in the area of cloud computing, and will lead to more public and ultimately hybrid cloud computing adoption. In order to get to hybrid cloud computing, I see much of the focus and innovation being associated with data security, workload portability (across private and public, in a seamless fashion), and license transferability between private and public. When this space reaches fruition, clients will be able to enjoy true elastic economics in a computing model that allows a mixture of owning and renting compute resources and software licenses.
Script packages are an integral part of virtual system patterns in IBM Workload Deployer. By attaching script packages to your patterns, you provide customizations particular to your unique cloud-based middleware environments. Customizations provided by script packages might include installing applications, creating application resources, integrating with external enterprise systems, and much more. The bottom line is, if you are creating virtual system patterns, you will almost certainly be creating script packages.
Largely, the act of creating a script package is independent of IBM Workload Deployer. The appliance does not dictate a particular scripting language, so all you need to do is make sure you can invoke your logic in the operating system environment. Your script package may be a wsadmin script, shell script, Java program, Perl script, and on and on. After you create the actual contents of your script package, you will then load that asset into the IBM Workload Deployer catalog.
Once loaded into the catalog, you define several attributes of your script package, including the executable command, command arguments, variables, execution time, and more. The process for defining these attributes is trivial using the intuitive UI in IBM Workload Deployer, but I wanted to take a little time to remind you of a technique I recommend to all users defining script packages. You can actually package a JSON file within the script package that defines all of the script's attributes. The format of the file is simple, and I am including an example below:
The example above is one taken from a script package in our samples gallery, and it shows the basics of which you need to be aware. Notice that in the JSON file, you can provide a name, description, unzip location, executable command, command arguments, variables, and more. You only need to ensure that the name of this JSON file is cbscript.json and that you include it at the root of the script package archive. Once you have done that, you load the script package archive into the catalog, refresh the script package details, and voila -- all the attribute definitions appear!
You may ask why I recommend this since it could seem like an unnecessary step. My answer to that is that you have to define these attributes anyway, so you might as well capture it once in the file. Once you capture it once in the file, you can ensure that if the same script needs to be reloaded, or if you need to move it to another appliance, its definition will be exactly the same (and presumably correct). I use this approach for all of my work, and for all of the samples I contribute to our gallery, and it really saves me a lot of misplaced effort that can result from typos. If you are out there creating script packages, try adopting this approach. I'm pretty sure you will be happy you did!
We've begun to seed this location with all sorts of helpful information on IBM Workload Deployer. Check it out and you will find links to a "getting started" section, articles, demos, redbooks, whitepapers, pointers to various blogs where authors write about private clouds or IBM Workload Deployer (yep, this blog is included), links to product documentation and education assistant, upcoming events, and more included in the wiki. We're still populating this location with content and we're looking for input on how to improve things ... so please provide your feedback and check back often to see how it evolves.
The content provided in the community is open and visible to everyone immediately. However, there is even more value if you create an id (or use your existing developerWorks id) to become a member of the community. Members can participate in the many collaborative elements that the community provides. This includes the ability to open discussions and collaborate on the forum, post blog entries in the IBM Workload Deployer community blog, or even share content that you have created which may be of interest to others.
There is even a specific section in the community focused on the Plugin Developer's Kit that Dustin mentioned in the previous post on extensibility ( see IBM Workload Deployer PDK wiki page ).
So please visit this new IBM Workload Deployer community and send us your feedback so that we can improve and grow this into a valuable resource. Ultimately, we want this to be a place where we can help each other be successful using IBM Workload Deployer. We also want to learn valuable insights from your experiences with IBM Workload Deployer so that we can continue to make improvements and optimizations in the appliance with the goal of improving your private cloud experience, making your business more agile and efficient. As always, please send us your feedback.
Customization capabilities have been very important to the design of IBM Workload Deployer going back to the beginning with WebSphere CloudBurst. Having the ability to quickly spin up environments in a cloud really does little good if those environments are not customized according to your needs. If you look at the virtual system pattern capability, it is why we always had the notion of custom images, custom patterns, and custom scripts. We give you a strong foundation, and you tweak it here and there to create what you want.
Customization is not a concept unique to virtual system patterns. The virtual application model in IBM Workload Deployer supports many different mechanisms for you to tailor your cloud-based environments. You can start with the virtual application pattern types that we ship and use any components in those patterns to build a custom environment. The patterns you build can include your own configuration (within the set of configurable parameters) and include policies that you need for your environment. In looking at just the IBM Workload Deployer Pattern for Web Applications and the IBM Workload Deployer Pattern for Databases, there are quite a number of scenarios you can support with your cloud. However, what happens when you want to go a little further and color outside the lines of what we provide?
At some point you may have heard or read that the entire virtual application pattern model resides on a pluggable architecture. In effect, this means that everything about a virtual application pattern type, from the elements that show up when building a pattern to the management interface you interact with after deployment, is customizable. The fundamental unit of customization for a virtual application pattern type is a plugin. Plugins provide the know-how in terms of installing, configuring, integrating, and managing the application types supported by a given pattern. Plugins also provide metadata that control what users see as they build and manage these patterns. In short, plugins are the source of truth for virtual application patterns!
If you looked in IBM Workload Deployer, you would find the collection of plugins that support the virtual application pattern types shipped with the offering. While that is interesting, you should also know that you can supply your own plugins. That's right. You can develop a plugin, and load it directly into the appliance. This allows you to do two very important things. First, you can extend the virtual application pattern types that come with IBM Workload Deployer with any kind of functionality you deem important. This may be additional monitoring, integration with external systems, or any number of other extensions. Second, you can create new virtual application pattern types that support your desired workloads. You can support the workloads with the software of your choosing so long as you can supply the necessary know-how in your plugins. In either case, you contribute the plugin, and your customized components become first class members of the IBM Workload Deployer landscape.
Okay, so I admit that this is not necessarily news. We have supported user-contributed plugins since the release of IBM Workload Deployer. However, there is something new that significantly lowers the barrier to entry in the custom plugin game. Early last week, IBM announced the IBM Workload Plugin Development Kit. This kit provides a set of tools and samples designed to make the construction and packaging of custom plugins a simple process. In my opinion, this reiterates our commitment to an extensible, application-centric cloud approach, and it represents a huge step forward in the industry as a whole. Be sure to check this out, and don't be shy with the comments and feedback!
As Joe mentioned in his last post, virtual application patterns are all the rage in IBM Workload Deployer. The high degree of abstraction provided by these patterns means users can remove tedious, time consuming tasks like middleware installation, configuration, and integration from their field of view. As a consequence, users can build and deploy application environments in unprecedented time, thus freeing up more time to focus on the actual application.
This is obviously important because building and deploying application environments are crucial, traditionally time consuming activities. However, what happens after you build and deploy the application? You manage it, that's what! Joe brought up the fact that IBM Workload Deployer makes this easier too by delivering an integrated management portal through which you can manage and monitor your application environments. Now, this probably already sounds valuable, but what really puts it over the top is the management portal exposes an interface that is workload aware. But, what does that mean?
To get an idea of what that means, consider the case that you use the shipped virtual application pattern to build a simple application environment with a web application and database. You deploy it with IBM Workload Deployer, and your application is up and ready. Now you want to start checking things out. You start by opening the management portal directly from the appliance, and you see both the application and database components listed in the view:
After you looked at basic machine statistics such as network activity and memory usage, you could move on to a more workload-centric view. For instance, you could examine statistics particular to a web application such as request counts and service response times:
You may also decide that you want to alter certain aspects of your deployed environment. As an example, you could update your deployed application or change certain configuration data in the deployed environment:
It is important to note that you have a management interface for each of the components in your environment. That means that from the same management interface, you can manage and monitor the database you deployed as part of your environment. For example, at different intervals, you may want to backup your database. You can do this directly from the management portal provided by IBM Workload Deployer:
Lest you think that you can only manage and monitor, this unique management interface is also a one stop shop for all of your troubleshooting needs. From the centralized portal, you can view log and trace data for each component:
Virtual application patterns are an attempt to encapsulate each phase of your application's lifecycle, from creation to deployment to management. In this regard, I hope the above provides a taste of some of the management capabilities provided by virtual application patterns. It truly is the tip of the iceberg!
In a post not long ago, I mentioned new enhancements to virtual system patterns in IBM Workload Deployer. A prominent part of those enhancements were updates to pattern construction that allow you to order virtual machine startup, order script package invocation, and include add-ons that provide system level configuration options. Recently I uploaded a demonstration to YouTube that highlights some of these new capabilities. Specifically, this provides a brief look at ordering and add-on enhancements.
I hope you take a look, and even more importantly, I hope to see some feedback. If you have something you would like to see captured in a demo, let me know and I'll work it to the top of a long and continually growing list!
When it comes to IBM Workload Deployer, I have no illusions concerning our competitors. They are out there, and they are constantly on the attack. Their dubious claims aside, I know this because I still get asked quite frequently to explain the benefits of IBM Workload Deployer versus some other general purpose cloud provisioning and management solution. So, while I have done that many times in various forums, I figured it was time to address the subject here on the blog.
When comparing IBM Workload Deployer to the other available solutions, I honestly feel comfortable saying we have no direct competition. I know you believe me to be biased, and rightly so, but let me explain why I think the competition is much more perception than reality. To do this, I want to focus on the patterns-based approach that IBM Workload Deployer takes to cloud provisioning and management.
Let's start with virtual system patterns in IBM Workload Deployer. Virtual system patterns allow you to build and deploy completely configured and integrated middleware environments as a single unit. These patterns build on top of our special IBM Hypervisor Edition images that bottle up the installation and quite a bit of the configuration of the underlying middleware products. Further, when using virtual system patterns, IBM Workload Deployer manages and automates the orchestration of the integration tasks that need to happen to setup a meaningful middleware environment. For instance, when deploying WebSphere Application Server you do not need to do anything on your end to deploy a clustered, highly available environment. When deploying WebSphere Process Server in this manner, you do not need to take any administrative actions to produce a golden topology. You just deploy patterns and the images, patterns, and appliance take care of the rest. Of course, you can add your own customizations and tweaks in the pattern, but we take care of the common administrative actions that would otherwise require your care.
I am not sure of a better way to say it, so I will be blunt: When deploying products delivered in IBM Hypervisor Edition form, no other solution compares to the virtual system pattern capability offered by IBM Workload Deployer. It is not even close. Can you provision products like WebSphere Application Server or WebSphere Portal using other cloud provisioning tools? Sure, but you should be aware that you will be writing and maintaining your own installation, configuration, and integration scripts. It is also likely that you will end up developing a custom interface through which deployers request your services (something not necessary when using the slick IBM Workload Deployer UI). All of this takes time, resource, and money. More importantly, this is not differentiating work and distracts from the real end goal: serving up applications. IBM Workload Deployer can deliver this operational capability right out of the box, and it can do so in a way that costs less than custom developed and maintained solutions.
When considering IBM Workload Deployer versus the competition, it is also important to consider the new virtual application pattern capability delivered in version 3.0. The virtual application pattern capability is a testament to IBM's thought leadership in and commitment to cloud computing for middleware application environments. Virtual application patterns take a bold step forward in raising the level of abstraction beyond the middleware environment and up to the most important resource in enterprise environments: the application. With a virtual application pattern, you simply provide your application and specify both functional and non-functional requirements for that application. When ready, you deploy that pattern, and IBM Workload Deployer sets up the necessary middleware infrastructure and deploys the provided application. Moreover, the appliance will monitor and autonomically manage the environment (i.e. scale it up and down) based on the policies you specify. Quite simply, this is a deployment and management capability our competition cannot match.
There is more to consider than just patterns though. The appliance makes it really simple to apply maintenance and upgrades to environments running in your cloud. It can autonomically manage your deployed environments (through policies in virtual application patterns and the Intelligent Management Pack for virtual system patterns), and it effectively abstracts the underlying infrastructure of your cloud environment. This abstraction is the reason IBM Workload Deployer can deploy your environments to PowerVM, zVM, and VMware environments. It also makes it easy to deploy the same environment to multiple different underlying platforms, thus accommodating typical platform changes that happen as an application moves from development to production. The best part of all is that the deployer’s experience is the same regardless of the underlying infrastructure since the appliance hides any platform idiosyncrasies.
The bottom line is that the appliance is purpose built to deploy and manage middleware and middleware application environments in a cloud, and as such, delivers immense out-of-the-box and ongoing value in this context. I should also point out that the design of the appliance acknowledges its purposeful nature. The CLI and REST API interfaces allow you to integrate the appliance into the operations of those general purpose provisioning solutions. In this way, IBM Workload Deployer acts as a middleware accelerator for your cloud computing efforts. This means that if you do have a general purpose solution, IBM Workload Deployer can still provide considerable value and let you avoid developing a considerable subsystem dedicated to deployment and management of middleware in the cloud. We believe in this type of integration, and have in fact built it into our own IBM solutions.
I could go on and on differentiating IBM Workload Deployer from the competition, but I hope my comments above give you a good context on why I think the appliance is in a league of its own. Of course, I always appreciate comments and feedback, so don't be shy!
If you are reading this blog then I am pretty sure that you are interested in the agility that can be achieved by rapidly provisioning middleware systems and standing up virtual applications in a private cloud environment. However there are other aspects of agility that you should also consider. One such aspect is the ability to build applications that can be easily maintained, updated, and extended. This is where OSGi technology comes into the picture.
If you have been working with the IBM Workload Deployer (or watching some IBM Workload Deployer demos) you may have noticed a category of components in the virtual application builder called OSGi Components.
Maybe you already know all about OSGi applications and the value they bring to an enterprise. Or, perhaps you noticed this and decided that you would search for some more information on this odd acronym and just what an OSGi application is all about.
In a nutshell OSGi technology is a way to define dynamic modules for Java. It provides a standard way to encapsulate components (called bundles) with metadata that define versioned package dependencies, service dependencies, packages exported, services exported, etc... basically everything you need to know about this bundle so that it can be connected up with other bundles to support a particular solution. These bundles can then be grouped together into applications and dynamically wired to fulfill necessary dependencies at runtime. The OSGi framework provides all of the necessary capability to manage the dependencies and resolve any problems.
Those who leverage OSGi technology benefit from improved time-to-market and reduced development costs. The loose coupling provided by the OSGi framework reduces maintenance costs and facilitates the dynamic delivery of components in a running system. Of course there's a lot more to it than just that ... involving portability across different environments, achieving the appropriate level of isolation or sharing within an environment, and integrating with the many different technologies and patterns already available today. I don't think I know enough about OSGi to do it justice here. But fortunately for me (and you) there are several experts who can make it all clear.
One such expert is Graham Charters and there is a great opportunity to hear him introduce this topic and also participate in a dialogue about the concepts and what they mean for your business. Graham will be leading a Global WebSphere Community Lab Chat on Wednesday of this week (July 20th) entitled: How can OSGi make your enterprise more agile. Graham is the IBM technical lead in the OSGi Alliance Enterprise Expert Group and an active participant in the open source community implementing many of these standards. So register now for this free session and learn how OSGi can make your enterprise even more agile.
A few weeks ago, I had a conversation with a current WebSphere customer about the potential value they could derive from the use of IBM Workload Deployer. Right away, this customer saw value in the consistency that a patterns-based approach could afford them. It was clear that patterns eliminate the uncertainty that can make its way into even the best-planned deployment processes. Initially though, the customer questioned the value of being able to do fast deployments because, in their words, "We don't deploy WebSphere environments that often." So, we continued our discussion, and then they asked an important question that I encourage all of our users to ask: "Why don't we deploy our WebSphere environments more frequently?"
It is interesting to talk with our WebSphere users that have a long history with our products. Often times, they have been taking a shared approach to WebSphere installations for many, many years. They develop innovative approaches and isolation schemes that allow them to carve up a single WebSphere installation (cell) amongst multiple different application teams. This allows them to avoid having to setup a cell for each application deployment and saves them the associated time. However, having talked to many different users taking this approach, it is not without its challenges.
As was the case in the customer I mention above, users typically made trade-offs when electing for larger, shared cells. As an example, if you have multiple different application teams with different types of applications using a single cell, applying fixes and upgrades to that cell can be a lot more complex. After all, you now have to coordinate plans across a number of different teams and find a window that fits all of their needs. For the same reason, trying incremental function via our feature packs is much more arduous in these types of cells. Additionally, administrative controls become more complex since teams with varying needs all require administrative access. Admittedly, this gets simpler with newer fine-grained security models in WebSphere Application Server v7 and v8, but it still requires organizational discipline and process.
At this point I should be clear that I am not denigrating the shared cell approach. It can work well, and we have many facilities built into the WebSphere Application Server product to support that model. However, if you are using this approach and you find yourself stumbling too much for your own liking, then I would strongly suggest that you explore the patterns-based approach of IBM Workload Deployer. By deploying patterns that represent your WebSphere cells using IBM Workload Deployer, you can quickly and consistently setup multiple WebSphere Application Server cells to support the varying needs of your application teams. You will still avoid spending an inordinate amount of time installing and configuring cells as that is an automated part of pattern deployment, and your application teams will still get the resources they need. Further, this can liberate your application teams in terms of how they apply maintenance, install upgrades, and absorb new function in the form of feature packs.
I am not suggesting a complete pendulum swing in your approach to how you manage multiple application environments. There is definitely a happy medium in terms of how many cells you end up with. After all, you do not want to trade in one set of problems for the problem of managing way too many different cells. However, I do think that decomposing monolithic, multi-purpose cells into smaller, more purposeful cells can be beneficial. In the course of thinking about this different approach, you may come to the same conclusion that the customer I mention above did. IBM Workload Deployer's rapid deployment capabilities are indeed valuable if you take a slightly different view of current processes.
In my opinion, declarative deployment models are key to the entire notion of Platform as a Service (PaaS). That is, users should concern themselves with what they want, but not necessarily how to get it. The PaaS system should be able to interpret imperatives from the user and automatically convert that to a running system. In this respect, I think the new virtual application pattern, and more specifically policies, in IBM Workload Deployer takes a giant leap toward a more declarative deployment model.
In IBM Workload Deployer, policies allow you to 'decorate' your virtual application pattern with functional and non-functional requirements. In other words, they provide a vehicle for you to tell the system what qualities of service you expect for your application environment. To put a little context around this discussion, let's examine the policies available in the virtual application pattern for web applications. Specifically, let's look at the four policy types you can attach to Enterprise Application, Web Application, and OSGI Application components in this pattern:
Scaling policy: When it comes to cloud, the first thing many folks think about is autonomic elasticity. Applications should scale up and down based on criteria defined by the user. Well, that is exactly what the scaling policy lets you do. You simply attach this policy to your application component, and then specify properties that define when to scale. First, you choose a scaling trigger from a list that includes application response time, CPU usage, JDBC connection wait time, and JDBC connection pool usage. After choosing your trigger, you decide the minimum and maximum number of application instances for your deployment, and then you choose the minimum number of seconds to wait for an add or remove action. At this point, you can deploy your application and IBM Workload Deployer will monitor the environment, automatically triggering scaling actions as needed.
JVM policy: I would be willing to bet that nearly all of you tune the JVM environment into which you deploy your applications. The JVM policy allows you to take two common tuning actions, setting the JVM heap sizes and passing in JVM arguments, as well as attach a debugger to the Java process (especially useful in development and test phases). You can also use the policy to enable verbose garbage collection (invaluable to understanding heap usage patterns for your application) and select the bit level (from 32 or 64) for your application. Again, all you have to do is attach the policy and specify the properties. IBM Workload Deployer will take care of the required configuration updates.
Routing policy: The routing policy provides a simple way to specify virtual hostnames and allowable protocols (HTTP or HTTPS) for your application. Attach the policy, provide the virtual hostname you want to use, select the desired protocols, and that's it! Remember, once you set the virtual hostname you will need to update your name server to map the hostname to the appropriate IP address.
Log policy: During the development and test phase, it is likely that you will want to enable certain trace strings in the application runtime. The log policy allows you to provide trace strings for your application, and it makes sure that the appropriate configuration updates occur in the deployed environment.
While this is not an exhaustive explanation of each of the policies above, I hope it gives you a basic idea of what they are and how to use them. To me, declarative deployment models are going to be a crucial part of making PaaS successful, so I am really excited about the notion of policies in IBM Workload Deployer. What do you think?
We've been talking a lot about IBM Workload Deployer V3 and we will continue to highlight different aspects of the capabilities it provides in the coming weeks. As we've already mentioned - IBM® Workload Deployer V3 is not just another release of the IBM WebSphere CloudBurst Appliance. While it builds on WebSphere CloudBurst's success, and supports and improves upon all of its original capabilities, Workload Deployer provides new application-centric computing capabilities for your private cloud, and brings you higher utilization, improved ease of use, and more rapid application deployment.
I just wanted to point out a great opportunity for anybody considering leveraging IBM Workload Deployer v3 to deploy Database workloads. On June 29th Rav Ahuja, a Senior Product Manager for Data Management at IBM, will be hosting a webcast entitled "Easily Deploying Private Clouds for Database Workloads". He will be joined by Chris Gruber (Product Manager, Database as a Service), Leon Katsnelson (Program Director, IM Cloud Computing Center of Competence), and Sal Vella (Vice President, Database Development and Warehousing) in this panel discussion.
As many of you already know, IBM Workload Deployer v3 comes pre-loaded with DB2 images and patterns that are configured to rapidly provision standardized database servers for any number of purposes. The servers can be deployed in standalone configurations or as part of a complete virtual system including web components with the database components. These servers can also be configured for high availability scenarios. This panel discussion will cover all of these scenarios and more.
You can read more about the webcast in this blog post by Rav Ahuja.
If you want further details about how to build and rapidly deploy databases in a private cloud, be sure to attend this free webinar on June 29th.
Among the major features of the new virtual application pattern in IBM Workload Deployer is the notion of elasticity. That is, as your application needs more resources, it gets them. When your application can meet its SLAs with fewer resources, the environment shrinks. With this kind of pattern, you enable elasticity by specifying a policy and defining the scaling trigger (i.e. CPU usage, application response times, database response times, etc.). What may have been a bit lost in some of these new announcements regarding IBM Workload Deployer is the fact that you can now leverage this core feature of cloud, elasticity, in your virtual system patterns.
If you have read this blog in the past, you probably already know that the Intelligent Management Pack is an option for virtual system patterns built using WebSphere Application Server Hypervisor Edition. When you enable the Intelligent Management Pack option, you are essentially building and deploying WebSphere Virtual Enterprise (WVE) environments. For those of you not familiar with WVE, the best way to describe it is that it provides you with application and application infrastructure virtualization capabilities. Of its many capabilities, one most germane to our discussion today is the ability for users to attach SLAs to applications and then have WVE automatically prioritize requests and manage resources in order to meet those SLAs. Inherent in this capability is the ability to dynamically start and stop application server processes (JVMs) as required. In other words, WVE provides JVM elasticity.
The fact that WVE provides JVM elasticity is nothing new. Further, IBM Workload Deployer started providing virtual machine (VM) elasticity in previous versions (when it was WebSphere CloudBurst). With this feature, you could add or remove VMs to an already deployed virtual system using dynamic virtual machine operations provided by the appliance. The catch was that the VM elasticity was a manual action and you could not link this elasticity to the same SLAs tied to your applications. Well, thanks to a new feature in WebSphere Virtual Enterprise and easy integration provided by the Intelligent Management Pack, this is no longer the case.
Starting in IBM Workload Deployer 3.0, you can take advantage of a new WVE feature called Elasticity Mode when using the Intelligent Management Pack. Elasticity mode is not unique to IBM Workload Deployer, but a concept new to the base WVE product. It allows one to define actions for how WVE should grow and shrink the set of nodes used by application server resources. Like the basic JVM elasticity capability in WVE, these node elasticity actions trigger based on SLAs tied to your applications. Consider the case that you are using elasticity mode and your application is not currently meetings its SLA. If WVE does not think it can start any more application server instances on the current set of nodes, it will grow the set of nodes per your elasticity configuration. Conversely, if WVE detects that it can meet SLAs with fewer nodes, it will shrink the resources per your elasticity configuration.
In IBM Workload Deployer, using elasticity mode becomes even easier. All you need to do is use the Intelligent Management Pack and enable the elasticity mode option in your virtual system patterns. When you do this, you get automatic integration between IBM Workload Deployer and the deployed WVE environment. What does that mean? It means that if WVE detects it needs more nodes, it will automatically call back into IBM Workload Deployer and request that the appliance provision a new VM that will serve as a node for application server processes. It also means that if WVE detects it could meet SLAs with fewer resources, it will call into IBM Workload Deployer and ask it to remove a node. All of this happens without any user scripting. All you have to do is enable this option in your patterns and configure SLAs appropriate for your applications.
To me, this exciting new feature brings out the best of elasticity capabilities in both IBM Workload Deployer and WebSphere Virtual Enterprise. The result is a single management plane that gives you both VM and JVM elasticity for your cloud-based application environments. Best of all, elasticity actions map directly to SLAs for your applications. After all, when it comes to cloud, it's the application that really matters!
As I have mentioned before, IBM Workload Deployer v3.0 introduces choices in pattern-based deployment models. One of those models, virtual system patterns, is a carry over from the WebSphere CloudBurst Appliance. When you use virtual system patterns in IBM Workload Deployer, you can take advantage of all of the techniques you put to use in WebSphere CloudBurst. This is certainly good news for current WebSphere CloudBurst users, but it goes a bit further. Instead of simply maintaining the status quo with virtual system patterns, which would have been reasonable considering the introduction of virtual application patterns, we chose to continue to expand on your customization options for this pattern deployment model. In particular, I want to discuss three new features in IBM Workload Deployer that may help you to better construct and manage virtual system patterns.
The first new feature is one that I have been eagerly awaiting. In the new version of the appliance, we provide you with the ability to specify part and script package ordering in your pattern. This means that, within the virtual system pattern editor, you can tell IBM Workload Deployer in which order to start the virtual machines in your pattern, and you can specify in which order to invoke the script packages within the pattern during deployment. This eliminates the need for special script invocation orchestration logic in your pattern (I had customers resorting to a semaphore like approach using a shared file system), and it allows you to be more declarative about the virtual machine bring-up process. There are constraints, specifically with the part ordering. Some images will impose an implied part start-up order that you cannot change. For instance, deployment manager parts in the WebSphere Application Server Hypervisor Edition image must start before custom node parts. The good news is the pattern editor will not allow you to specify a part start-up order that violates these constraints. The image below shows an example of the ordering view in the virtual system pattern editor.
Another new feature that may influence the way you build virtual system patterns is the introduction of Add-Ons. You can think of Add-Ons as special script packages that you can include in your virtual system pattern that perform system-level configuration actions. Specifically, you can include add-ons in your virtual system pattern to add an operating system user, add a virtual disk, or add a NIC during the deployment process. You include Add-Ons in your pattern by simply dragging and dropping them onto a part in your pattern, just as you do with script packages today. The difference between script packages and Add-Ons is that IBM Workload Deployer will ensure the invocation of all Add-Ons before any other scripts run during deployment. We include default Add-On implementations for adding a user, disk, and NIC.
The last new feature I want to talk about today has more to do with how you manage or govern the deployment of virtual system patterns. In WebSphere CloudBurst 2.0, we introduced the idea of Environment Profiles as a way to extend your customization reach into the deployment process. Initially, these profiles gave you the ability to directly assign IP addresses to virtual machines in your deployment, declaratively specify virtual machine naming formats, and easily split a single pattern deployment across multiple cloud groups. In IBM Workload Deployer, you will be able to use these same profiles to set resource consumption limits for pattern deployments. In particular, you will be able to set cumulative limits for virtual CPU, memory, storage, and software licenses used by deployments tied to a specific profile, thereby giving you finer-grained control over cloud resource consumption. The picture below shows the new resource limit aspects of environment profiles.
Virtual system patterns are key in the deployment model choices for IBM Workload Deployer. Not only did we carry the concept over from WebSphere CloudBurst to IBM Workload Deployer, but we made it even better. Expect this trend to continue!
More and more, I am getting a question about how to bring existing WebSphere environments into IBM Workload Deployer. While "bringing in an environment" can mean any number of things, let's take it to mean that a user wants to import their existing WebSphere cells, applications, and configuration into IBM Workload Deployer as a pattern they can subsequently deploy. While there may not be a big red easy button in the appliance that lets you point to an existing environment and import it, there are a couple of techniques that one can employ. I have covered both techniques before, but since I'm getting the question with increasing frequency, I felt like it was time for recap.
The first option is to use a combination of IBM Workload Deployer and Rational Automation Framework for WebSphere. This is a use case I have spoken about numerous times at conferences and in blog posts and articles. In fact, you can read a little about it here. In this sense, RAFW provides excellent capabilities to point at an existing cell, and import everything about it. This includes WebSphere configuration, applications, shared libraries, and more. Once imported as a RAFW project, you can use the IBM Workload Deployer integration script package provided by RAFW to replay that configuration on top of deployments created by the appliance.
The second option is something I talk about a little less frequently. This option revolves around the use of a sample script (provided for free in our samples gallery) that you can run against existing WebSphere cells. The invocation of this script produces IBM Workload Deployer script packages that you can use in patterns to apply the configuration of the target cell to your new cloud-based deployments. Under the covers the utility script and resultant script packages use backupConfig and restoreConfig respectively. They do ensure the update of the cell, node, and host names during the restoreConfig execution (which happens automatically during pattern deployment). Beyond that, the use of the script is subject to the same limitations and rules in place for the use of the backupConfig and restoreConfig commands. You can read more about this capability, watch it in action, and download it for free.
I hope this is all useful information for those of you looking for ways to import existing environments into IBM Workload Deployer as patterns. If you have any questions, please let me know!
WebSphere configuration management practices are common items of conversation that comes up when I am talking with users about IBM Workload Deployer (formerly WebSphere CloudBurst). This conversation can take on so many different avenues that it is hard to capture all of them in a short blog post. So, for the sake of this post, let's consider two facets of WebSphere configuration management. The first facet is addressing the need to consistently arrive at the same configuration across multiple deployments of a given WebSphere environment. The second facet involves managing the configuration of a deployed environment over time to protect against living drift. What is the best way to tackle these two challenges? Well, it comes down to picking the right tool for the job.
When it comes to ensuring consistency of initial WebSphere configuration from deployment to deployment, there is really no better means than patterns-based deployments enabled by IBM Workload Deployer. Whether you are using a virtual system or virtual application pattern, the bottom line is that you are representing your middleware application environments as a single, directly deployable unit. When you need to stand that environment up, you simply deploy the pattern. The deployment encapsulates the installation, configuration, and integration of the environment, and your applications if you so choose. The benefit of this approach is that once you get your pattern nailed down, you can be extremely confident that the initial configuration of your environments is extremely consistent from deploy to deploy. Basically, no more bad deployments because someone forgot to run configuration step 33 out of 100!
Because we talk about the benefits of consistency provided by our IBM Workload Deployer patterns, users often ask what IBM Workload Deployer does in terms of configuration governance for deployed environments. In other words, they ask how IBM Workload Deployer helps them to track configuration changes or compare the configuration of a deployed environment to a known good one. The honest answer is that this is a bit beyond the functional domain of the appliance. While IBM Workload Deployer does allow you to manage the deployed environment (apply fixes, update deployed applications, snapshot, etc.), it does not layer some of the common configuration governance concerns on top of that. However, there is a good reason why the appliance does not focus on that. It's because Rational Automation Framework for WebSphere does!
If you find yourself wanting to actively track configuration changes, periodically (and automatically at specified intervals) compare configuration changes to a 'golden' baseline, import configurations of a known good environment, apply common configuration across a number of cells, then the capabilities of RAFW would likely be of interest to you. It can do all this and give you an incredible toolbox of out-of-the-box application deployment and configuration capabilities for WebSphere environments. In my mind, for those that spend a good deal of time dealing with WebSphere configuration, whether it be deploying applications, configuring containers, or debugging inadvertent changes, an examination of RAFW functionality is a must.
Now it is time for a bit of disclaimer/clarification. I am not suggesting that you pick one or the other when it comes to IBM Workload Deployer and RAFW. In fact, there are many scenarios where 1+1=3 with these two solutions, and I have written about it many, many times (including this article). That said, I think it is important to highlight the relative strengths of each product, so that it is easier to map it back to your pain points. In honesty, many of the users I talk with have challenges in getting the initial configuration right AND managing it over time. That kind of problem beckons for the integrated IBM Workload Deployer/RAFW solution.
Of course, technology only gets you so far when it comes to these kinds of problems. It would be disingenuous of me to suggest otherwise. It has always been and will continue to be important to establish clear and rigorous processes around the way you deploy, manage, and change environments. This just gives you an idea of some of the tools you can leverage to aid in the implementation of those processes.
One of the fundamental tenants of IBM Workload Deployer is a choice of cloud deployment models. Starting in v3.0, users will be able to deploy to the cloud using virtual appliances (OVA files), virtual system patterns, or virtual application patterns. The ability to provision plain virtual appliances is a way to rapidly bring your own images, as they currently exist, into the provisioning realm of the appliance. As such, I think the use cases and basis for deciding to use this deployment model are fairly evident. However, when comparing the two patterns-based approaches, virtual system patterns and virtual application patterns, the decision requires a bit more scrutiny.
Our pattern approach is a good thing for you, the user. Basically, when we refer to patterns in the context of cloud, we are referring to the encapsulation of installation, configuration, and integration activities that make deploying and managing environments in a cloud much easier. Regardless of what kind of pattern you end up using, you benefit from treating a potentially complex middleware infrastructure environment or middleware application as a single atomic unit throughout its lifecycle (creation, deployment, and management). In turn, you benefit from decreased costs (administrative and operational) and increased agility via rapid, meaningful deployments of your environments. That said, it is imperative to understand the differences between virtual system and virtual application patterns, and more importantly, it is important to understand what those differences mean to you. Let's start by considering the admittedly simple 'Cloud Tradeoff' continuum below.
In the above graph, the X-axis represents the degree to which you have customization control over the resultant environment. The degree of control gets lower as we move from left to right. The left Y-axis represents total cost of ownership (TCO), which decreases as we move up the axis. The right Y-axis represents time to value, which similarly decreases as we go up the axis. Naturally, enterprises want to move up the Y-axis, but, and it can be quite a big but, they are sometimes hesitant to relinquish much control (move to the right on the X-axis) in order to do so. In that light, I think it helps to explore our two patterns-based approaches a bit more.
The most important thing to understand about this continuum is that the X-axis really represents the customization control ability from the point of view of the deployer and consumer of the environment. An example is probably the best way to explain. Let's consider a fairly simple web service application that we want to deploy to the cloud. If we were to use a virtual system pattern to achieve this, we would probably start by using parts from the WebSphere Application Server Hypervisor Edition image to layout our topology. We may have a deployment manager, two custom nodes, and a web server. After establishing the topology, we would add custom script packages to install the web service application and then configure any resources the application depended on. Users that wanted to deploy the virtual system pattern would access it, provide configuration details such as the WAS cell name, node names, virtual resource allocation, and custom script parameters, and then deploy. Once deployed, users could access the environment and middleware infrastructure as they always have. That means they could run administrative scripts, access the administrative console provided by the deployed middleware software, and any other thing one would normally do. The difference in using virtual system patterns is not necessarily the operational model for deployed environments (though IBM Workload Deployer makes some things, like patching environments, much easier). Instead, the difference is primarily in the delivery model for these environments.
Using a virtual application pattern to support the same web service application results in a markedly different experience from both a deployment and management standpoint. In using this approach, a user would start by selecting a suitable virtual application pattern based on the application type. This may be one shipped by IBM, such as the IBM Workload Deployer Pattern for Web Applications, or it may be one created by the user through the extensibility mechanisms built into the appliance. After selecting the appropriate pattern, a user would supply the web service application, define functional and non-functional requirements for the application via policies, and then deploy. The virtual application pattern and IBM Workload Deployer provide the knowledge necessary to install, configure, and integrate the middleware infrastructure and the application itself. Once deployed, a user manages the resultant application environment through a radically simplified lens provided by IBM Workload Deployer. It provides monitoring and ongoing management of the environment in a context appropriate for the application. This means that there are typically no administrative consoles (as in the case of the virtual application pattern IBM ships), and users can only alter well-defined facets of the environment. It is a substantial shift in the mindset of deploying and managing middleware applications.
Okay, with that explanation in the bag, let's revisit the diagram I inserted above. I hope it's clear that, all things being equal, virtual application patterns indeed provide the lowest TCO and shortest TTV because of the degree to which they encapsulate the steps involved in setting up complex middleware application environments. So, let's get back to my assertion that the customization control continuum really applies to the deployer and consumer. Why do I say that? It's simple. In the case of either the virtual system pattern or the virtual application pattern, the pattern composer has quite a bit of liberty in how they construct things. Sure, we enable you right out of the chute by shipping pre-built, pre-configured IBM Hypervisor Edition images, as well as pre-built virtual system and virtual application patterns. The key is though, that the IBM Workload Deployer's design and architecture also enables you to build your own patterns -- be they the virtual system or virtual application type. With anywhere from a little to a lot of work, you can build virtual system and virtual application patterns tailored to your use cases and needs.
At this point, you may be saying, "Well now you have really confused things! How am I supposed to decide what kind of patterns-based approach fits my needs?" I have some advice in that regard. First, map your needs to things that we enable with the assets you get right out of the box with IBM Workload Deployer. If your application fits into the functional scope of one of the virtual application patterns that we ship, use it. If you can support the application by using IBM Hypervisor Edition images, virtual system patterns, and custom scripts, do it. In this way, you benefit most from the value offered by IBM Workload Deployer. However, if you find that you cannot use any of the assets we provide right out of the box (e.g. you want to deploy your environment on software not offered in IBM Hypervisor Edition form or in a virtual application pattern), then ask yourself one simple question: "What do I want my user's experience to be?"
In this sense, I primarily mean a user to be a deployer or consumer of your patterns. You need to decide whether you favor the middleware infrastructure centric approach afforded by virtual system patterns, or if you prefer the application centric approach proffered by virtual application patterns. There is no way to answer this generically for all potential IBM Workload Deployer users. Instead, you have to look at your use case, understand what's available to help you accomplish that use case, and finally, decide on what you want your user's experience to be. I hope this helps!
Application-centric cloud computing is the main thrust behind the new capabilities of IBM Workload Deployer v3.0. But what does that really mean? After all, application-centricity is really just a concept. Granted, it is an important concept, but it is fairly meaningless until it is put into action or implemented. IBM Workload Deployer does just that with its new Virtual Application Patterns (VAPs).
VAPs are the embodiment of the workload pattern approach I briefly discussed in an overview post a few weeks back. The idea with a VAP is to give the user an interface through which they can provide their application, specify dependencies, declare functional and non-functional requirements and then deploy. Of course application middleware is a part of the overall solution, but IBM Workload Deployer has the smarts to build, configure, and integrate the necessary infrastructure in order to support the user's application. This is completely hidden from the user, so they are liberated to focus on the application and its requirements.
If we scratch a bit further beneath the surface of a VAP, we see that these patterns contain three primary pieces. These primary pieces are components, links, and policies, and they are fundamental to understanding how virtual application patterns work. Let's start with the building blocks of VAPs, components. Put simply, components represent different resources and functionality profiles that make up your application environment. As an example, the IBM Workload Deployer Pattern for Web Applications is a VAP that contains components for an EAR file, WAR file, message queue, and any number of other components that are typical requirements for a web application. The components will certainly vary based on the workload type (i.e. the components included in a web application VAP would be different than those included in a batch application VAP), but they are the foundation of any VAP.
From the ground up, the next logical element we come to in the VAP is a link. A link is a way to declare a dependency or integration point between two components. As an example, consider a VAP with a WAR file component and a database component. You might draw a link between the WAR component and the database component to indicate that your web application uses or otherwise depends on the database. IBM Workload Deployer interprets this link, and takes it as a directive to configure the integration between the two components as a part of deployment. In this case, that may mean configuring a data source in the application's container. This is just a simple example, and an application may have any number of links between components.
Finally, we come to the policy element within the VAP. A policy is a way for a user to specify functional and non-functional requirements for their application environment. Users attach policies to the VAP, or to components in their VAP, and IBM Workload Deployer interprets and enforces those policies. In the context of a web application, one example of a policy could be a scaling policy. The scaling policy might indicate scaling requirements for the application that included minimum application instances, maximum application instances, and conditions that triggered scaling activities. IBM Workload Deployer would use the information in a scaling policy within a VAP to appropriately manage the deployed, running environment. Other examples of a scaling policy may include a JVM policy that provides configuration directives for the java virtual machines in your application environment or a logging policy that defines logging configuration options. In any case, the policy element allows VAP builders to influence the configuration and management of the application environment.
In the example VAP below you can see the use of components (Enterprise Application, Database, User Registry, Messaging Service), links (blue lines between components), and policies (Scaling Policy, JVM Policy):
In total, when I look at a VAP a particular word sticks out to me: declarative. VAPs really enable declarative, application-centric cloud computing. What do I mean? By declarative, I mean you are telling IBM Workload Deployer what you want, but not necessarily how you want it done. It is the job of IBM Workload Deployer to take care of the how. This shift in approach to application environments enables the potential for significant savings, and more importantly to me, lays the foundation for a more agile, flexible approach to deploying and managing application environments.
There will be more in the weeks and months to come on IBM Workload Deployer, so stay tuned. I also want to put a plug in for a new blog from Jason McGee. For those that do not know Jason, he is an IBM Distinguished Engineer, and the lead architect behind IBM Workload Deployer. Be sure to check out his blog for insights on this new offering, as well as for all things cloud.
When one uses IBM Workload Deployer (previously WebSphere CloudBurst) to deploy a virtual system pattern, they benefit from a completely automated deployment process. The automation includes the creation and placement of virtual machines, injection of IP addresses, initiation of internal processes, and invocation of included scripts. Most of these processes are straightforward and require little more than a brief overview. However, the placement of virtual machines stands out, and it's inner workings are the subject of quite a few questions when I discuss the appliance. With that in mind, I thought I would provide a little more information on how the placement algorithm in IBM Workload Deployer works.
The placement subsystem in IBM Workload Deployer considers three primary elements: compute resource, availability, and license optimization. Compute resource availability is the gating factor for placement. That means that IBM Workload Deployer first looks at the available CPU, memory, and storage resource in the collection of hypervisors making up the cloud group(s) you are targeting for deployment. If a particular hypervisor cannot provide enough resource based on the amount you requested for your deployment, then it is automatically taken out of the eligible hosts pool. It is important to note that IBM Workload Deployer will overcommit CPU, and it will overcommit storage if you direct it to do so. It will not overcommit memory because that could severely degrade the performance of the application(s) running in the virtual machines.
After choosing the pool of hypervisors that are capable of hosting the virtual machines in your deployment from a compute resource perspective, the appliance then considers high availability. To better understand this particular placement stage, let's consider an example. Consider you are deploying a pattern based on WebSphere Application Server Hypervisor Edition and it contains two custom node parts. It is conceivable, and in fact likely, that these two custom node parts will host members of the same cluster, and thus the two nodes will support the same applications. As such, IBM Workload Deployer will attempt to place the two custom nodes on different physical machines in order to prevent a single point of failure. Of course, this depends on having two hypervisors with enough resource (CPU, memory, storage) to host the virtual machines, but the appliance makes that decision in the first placement stage.
After considering compute resource and high availability, IBM Workload Deployer moves to the last stage of placement: license optimization. In this stage, the placement subsystem attempts to place the virtual machines on hypervisors in a way that minimizes the licensing cost to you. The appliance can do this because it is aware of IBM virtualization licensing rules and takes those into account during this stage (if you aren't familiar with virtualization licensing rules and you are curious, ask you're sales representative to explain some time). During this stage, it will not violate any resource overcommit directives or rules in place, nor will it compromise system availability, but it will seek to minimize costs within these parameters.
At this point, I should make something clear that may already have occurred to you. You can override most of these placement rules by creating a cloud group containing only one hypervisor. In this case, IBM Workload Deployer will put all virtual machines on the single hypervisor until it runs out of compute resource (memory is likely to be the constraining factor). I would not suggest that you do this unless you have a good reason or you are in a simple pilot phase, but I do like to point out the art of the possible!
While not incredibly deep from a technical perspective, I do hope that this provided a few helpful details on what goes on during the placement stages of deployment. If you have any questions, do let me know.
Jason McGee will be leading the second GWC Lab Chat this week on Wednesday, 4/20. The very timely topic is related to recent announcements from IBM regarding the IBM Workload Deployer (see previous posts). Entitled "Application-Centric Cloud Computing" the discussion will focus on the concept of deploying and managing your application workloads in a shared, self-managed environment rather than manually creating and managing the application middleware topologies. It places the focus on the application rather than the infrastructure. This concept promises to deliver greater simplicity, elasticity, and
density among other things. It can position your business to react more
quickly and efficiently to the increasing demands of your customers and
free you from the managing all of the details.
Many of you may have already heard Jason speak last week at IMPACT 2011 in the cloud mini main tent or perhaps at any number of other sessions that Jason was involved in. Jason is the key architect behind IBM's WebSphere cloud activities. Obviously, Jason understands the cloud space very well and has a clear view of the evolution into Application-Centric Cloud Computing. This GWC Lab Chat will provide the opportunity to get your questions answered and share your perspective on this technology.
Jason will provide a brief introduction to the concepts and ideas and then lead an open discussion. Put it on your calendar and plan to attend - and please plan to bring your questions and comments to help foster a rich discussion. We want to hear from you.
If you haven't registered yet it is not too late - learn more and register here. It is easy to register and there is no cost. This is a very timely event and a great way to dig a little more deeply into concepts you first heard at IMPACT or perhaps hear them for the first time. Don't miss it!
IBM Impact 2011 was a wildly busy week! Customer meetings, entertaining keynotes, informative sessions, and hands-on labs packed the 6 days with more than enough action. I spent a lot of the week presenting sessions and conducting labs for the newly announced IBM Workload Deployer. As one would expect with any new announcement, we got tons of questions about IBM Workload Deployer. While I cannot capture all the questions and their answers here, I will try to cover some of the more prevalent ones below.
Question: What happened to WebSphere CloudBurst?
Answer: The short answer is, it simply went through a rename. WebSphere CloudBurst became IBM Workload Deployer v3.0. The version 3.0 acknowledges this is an evolution of what we started with WebSphere CloudBurst, which was at version 2.0. Why remove WebSphere from the name? The fact that this is now an IBM branded offering is more accurate as it is capable of deploying and managing more than just WebSphere software.
Question: What is new in IBM Workload Deployer?
Answer: While there are many new features that I will be talking about over the coming months, the most prominent new facet is the introduction of workload patterns (also referred to as virtual application patterns). As opposed to topology patterns (traditionally referred to as simply patterns in the WebSphere CloudBurst product), workload patterns raise the level of abstraction to the application level. Instead of focusing on application infrastructure and its configuration as you do with topology patterns, workload patterns allow you to focus on the application and its requirements. When using workload patterns, you provide the application, attach policies that specify functional and non-functional requirements, and deploy. IBM Workload Deployer handles deploying and integration the middleware infrastructure necessary to support the application, and it automatically deploys your application on top of that middleware. In addition, IBM Workload Deployer manages the application runtime in accordance with the policies that you specify in order to provide capabilities such as runtime elasticity.
Question: If I am a current WebSphere CloudBurst user, what does this mean for me?
Answer: Not to worry. You will be able to use all of your WebSphere CloudBurst assets (patterns, scripts, images) in the new IBM Workload Deployer. All of the capabilities previously in WebSphere CloudBurst are present in IBM Workload Deployer (terminology may vary slightly -- topology pattern instead of just pattern for instance). Additionally, we continue to expand on the functionality that you are familiar with from WebSphere CloudBurst. This includes updates for Environment Profiles, new IBM Hypervisor Edition images, new pattern building capabilities, and more. Stay tuned for more information about these new features and for information on how you can move your WebSphere CloudBurst resources to the new IBM Workload Deployer.
Question: How do I choose between using workload and topology patterns?
Answer: There are a number of factors that will lead you to using either workload patterns, topology patterns, or both. The primary decision point will be how much control you really need (not want). When using workload patterns, you sacrifice some customization control over the configuration, integration, and administration of the middleware application environment since the workload pattern and management model abstracts away the 'guts' of the system. Everything about the workload pattern is application-centric. On the other hand, topology patterns give you intimate control over the configuration, integration, and administration of the middleware application environment. As a general rule of thumb, if your application requirements match the capabilities of a workload pattern, that is the way to go as it can greatly reduce complexity and cost associated with deployment and management. If a workload pattern does not meet the needs of your application, topology patterns can still greatly reduce cost and complexity and you can tailor them to fit almost any need. Beyond generalities, there is no hard and fast rule for choosing one over the other. It comes down to understanding your application environment and its needs.
Question: Is IBM Workload Deployer an appliance like WebSphere CloudBurst?
Answer: Yes, it is still an appliance, but an updated one! The new appliance is 2U, and it provides more storage, processing power, and memory. It is still just as easy to setup, but just slightly bigger.
Well, that is all for now, but I will be back many times over the coming months with more information. In the meantime, if you have any questions, please leave them in a comment below.
I hate sitting on secrets. I always have. I understand that sometimes it's in the best interest of everyone (and your job) to keep tight lips, but that does not make it any more fun. Inevitably, the run-up to our annual Impact conference means everyone in the lab is doing their fair share of secret keeping -- just waiting for announce time. For a lot of us, that day ended Tuesday with the announcement of the IBM Workload Deployer v3.0.
Now, you may be wondering, 'I have never heard of this. Why is it version 3.0??' Well, IBM Workload Deployer is a sort of evolution of the WebSphere CloudBurst Appliance, which was previously at version 2.0. This is good news for all of our current WebSphere CloudBurst users because all of the functionality (plus new bits of course) that they have been using in WebSphere CloudBurst are present in IBM Workload Deployer. You can use and customize our IBM Hypervisor Edition images in IBM Workload Deployer. You can build and deploy custom patterns that contain custom scripts in order to create highly customized IBM middleware environments. So, what's the big deal here? Two words: workload patterns.
Workload patterns represent a new cloud deployment model and are an evolution of the traditional topology patterns you may have seen with WebSphere CloudBurst Appliance (I am a little torn between evolution and revolution, but that's splitting hairs). Fundamentally, workload patterns raise the level of abstraction one notch higher than topology patterns and put the focus on the application. That means, when you use a workload pattern the focus is on the application instead of the application infrastructure. Perhaps an example would be helpful to illustrate how a workload pattern may work in IBM Workload Deployer.
Let's consider the use of a workload pattern that was part of the recent announcement, the IBM Workload Deployer Pattern for Web Applications v1.0. Just how might something like this work? It's simple really. You upload your application (maybe a WAR or EAR file), upload a database schema file (if you want to deploy a database with the solution), upload an LDIF file (if you want to setup an LDAP in the deployment to configure application security), attach policies that describe application requirements (autonomic scaling behavior, availability guidelines, etc), and hit the deploy button. IBM Workload Deployer handles setting up the necessary application middleware, installing and configuring applications, and then managing the resultant runtime in accordance with the policies you defined. In short, workload patterns provide a completely application centric approach to deploying environments to the cloud.
Now, if you are a middleware administrator, application developer, or just a keen observer, you probably have picked up on the fact that in order to deliver something as consumable and easy to use as what I described above, one must make a certain number of assumptions. You are right. Workload patterns encapsulate the installation, configuration, and integration of middleware, as well as the installation and configuration of applications that run on that middleware. Most of this is completely hidden from you, the user. This means you have less control over configuration and integration, but you also have significantly reduced labor and increased freedom/agility. You can concentrate on the development of the application and its components and let IBM Workload Deployer create and manage the infrastructure that services that application.
Having shown and lobbied a bit for the benefits of workload patterns, I also completely understand that sometimes you just need more control. That is not a problem in IBM Workload Deployer because as I said before, you can still create custom patterns, with custom scripts based on custom IBM Hypervisor Edition images. The bottom line is that the IBM Workload Deployer offers choice and flexibility. If your application profile meshes well with a workload pattern, by all means use it. If you need more control over configuration or more highly customized environments, look into IBM Hypervisor Edition images and topology patterns. They are both present in IBM Workload Deployer, and the choice is yours.
If you happen to be coming to IBM Impact next week, there will be much more information about IBM Workload Deployer. I encourage you to drop-by our sessions, ask questions, and take the opportunity to meet some of our IBM lab experts. Hope to see you in Las Vegas!
One of the key benefits of WebSphere CloudBurst adoption is rapid -- seriously fast -- deployments of middleware application environments. Our users are leveraging the appliance to bring up enterprise-class middleware environments in mere minutes. If you know a little bit about WebSphere CloudBurst, that statistic may be a little surprising considering the appliance dispenses large virtual images from the appliance over the network to a farm of hypervisors. You may ask how the appliance can achieve such rapid deployments in light of the mere physics involved in transferring large amounts of data over a network. The simple answer is caching of course!
WebSphere CloudBurst creates a cache for each unique virtual image on datastores associated with the hypervisors in your cloud. On subsequent deployments of the same virtual image to the same datastore, WebSphere CloudBurst does not need to transfer the image over the wire. It simply uses the virtual disks that are in the cache on the datastore. In the context of the virtual image cache, the deployment process goes something like this:
WebSphere CloudBurst identifies the images necessary to deploy the pattern selected by the user.
WebSphere CloudBurst identifies the hypervisors and associated datastores that will host the virtual machines created during deployment.
WebSphere CloudBurst checks the selected datastores to see if they already have caches for the images it will be deploying. From here, one of two things happens:
WebSphere CloudBurst detects that there is no cache on the datastore and transfers the images over to the hypervisor, thereby creating the cache on the underlying datastore.
WebSphere CloudBurst detects that there is a cache on the selected datastore and uses that cache in lieu of transferring the disk over the wire.
The process may sound complicated, but it is completely hidden from you, the user. You do not need to know how the cache works since WebSphere CloudBurst handles all of these interactions. So, why am I telling you all of this then? As a WebSphere CloudBurst user, it is good to be aware of the cache for two main reasons. First, you need to account for the storage space the cache needs when doing capacity planning for your WebSphere CloudBurst cloud. Second, anytime you upload or create a new image through extend and capture, I would strongly suggest you automatically prime the cache for this new image. You can do this by simply deploying a pattern built on the image to each unique hypervisor/datastore in your environment. This may take a temporary re-arrangement of cloud groups, but it is a simple process, and it guarantees rapid deployments for all users of the new image.
I hope this sheds a little light on a subject we do not discuss too often. As always, if you have any questions, do not hesitate to let me know!
I hardly ever have a conversation about WebSphere CloudBurst, or generally cloud computing for application middleware, without the topic of databases coming up. Databases are such an important piece of nearly every application middleware environment, so users want to be sure that whatever they do for their application servers, they can also do for the databases on which their applications rely. That is why the capability to deploy DB2 from WebSphere CloudBurst has been around for as nearly as long as the capability to deploy WebSphere Application Server.
Even though DB2 deployment capability has been around for a while, there are still some common misconceptions regarding the offering. First, I have talked to a fair number of users who are under the impression that we only offer a trial version of DB2 for deployment via WebSphere CloudBurst. While that was true for the first few months of the offering, that is no longer the case. For several months now, a fully supported, 64 bit, production-ready DB2 image has been ready for use in WebSphere CloudBurst. If you were waiting for a DB2 image that you could go live with, wait no longer!
The other misconception, or rather, point of confusion, arises from the fact that the DB2 image for WebSphere CloudBurst is not, by name, a Hypervisor Edition image. I can assure you that is in name only. The DB2 image looks like and behaves like any other IBM Hypervisor Edition image once you load it into the appliance. You can use it to build and deploy patterns in the same way you use other images in WebSphere CloudBurst. You may just have trouble finding it if you search for 'DB2 Hypervisor Edition' as opposed to 'DB2 Server for WebSphere CloudBurst Appliance.'
Instead of going into further detail, I want to refer you to a blog entry from a fellow IBMer, Leon Katsnelson. Leon is a program director for DB2 and is responsible for the team that develops and delivers the DB2 image for WebSphere CloudBurst. In his most recent post, he provides a nice overview of the image and gives good information for those looking to use DB2 and WebSphere CloudBurst (there is also a bit on cloud computing at the beginning that I think is spot on). Check out Leon's post, and let us know what you think!
In last week's post, I put the spotlight on various aspects of bundles in the Image Construction and Composition Tool. I finished with a look at a WebSphere CloudBurst virtual image created from the bundle. However, you do not just magically go from a bundle to an image that you can use in WebSphere CloudBurst, Tivoli Provisioning Manager, or on the IBM Cloud. Today, I want to show you how to go from a bundle to a custom virtual image using the IBM Image Construction and Composition Tool.
Once you have defined at least one bundle and one base operating system image, you are ready to compose a custom image. We already talked about creating a bundle, but the base operating system image is a new topic. You can do this by either starting from ISO and kickstart configuration files, or you can import an existing Open Virtual Appliance (OVA) image that contains your operating system of choice. Once you have that base image imported or defined in the Image Construction and Composition Tool, you can extend it to create a custom image on top of the base OS image.
After creating your extended image, you can add bundles that represent the software you want to install in your custom image. Simply click on the Software tab of the new virtual image. Click the add icon, and select the bundle that you want to add. You can add as many bundles as you would like to your custom image.
After adding a bundle, it will show up in the Planned list of software for the image. Click on it to display its details in the right side of the screen. You will notice General, Install, and Configuration sections for the bundle. In the Install section, you will find a list of the installation parameters you defined for the bundle. You can provide values for the parameters at this time.
If you click on the Configure section, you will see all of the configuration paramters you specified for the bundle. You can provide default values, and you can specify whether or not these should be configurable by deployers of your custom image. If you mark them as configurable, users will be able to provide values for the parameters at image deploy time, regardless of whether they provision the image using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
After you add the necessary bundles and specify installation and configuration data, you can save the image. Upon saving, the image status changes from Synchronized to Out of Sync.
Now you are ready to synchronize the image. To do this, simply click the synchronize icon. This will result in the creation of a virtual machine in the cloud envrionment (VMware or IBM Cloud) you defined in the selected cloud provider. The Image Construction and Composition Tool will then invoke the appropriate installation tasks (per the bundles you included in the image) within the running virtual machine. It will also copy over any configuration scripts you defined in the bundle.
After a while, the synchronization process completes, and the image returns to the Synchronized state. At this point, you are ready to capture the image by clicking the capture icon. This results in the creation of an OVA virtual image with your customizations. When the capture process completes, the image status changes to Deployable.
Once the image is in the deployable state, it is nearly ready to use. If you are using the IBM Cloud as your cloud provider, you can simply mark the image complete by clicking the complete icon. At this point, the image will show up in your private catalog on the IBM Cloud and it is ready to use. If you are using VMware as the cloud provider, you need to export the image. Click the export icon and provide information about an SCP-enabled server to which you want to export the image. Ideally, this location is directly reachable by the WebSphere CloudBurst or Tivoli Provisioning Manager environment into which you will import the image.
You can monitor the export status in a separate window by clicking on a link shown after clicking the OK button in the dialog above. When the export finishes, you are ready to import your new custom virtual image into WebSphere CloudBurst or Tivoli Provisioning Manager.
I hope the last three posts have given you a better idea of what the new IBM Image Construction and Composition Tool is all about. There will definitely be more to come about this tool in the near future, but in the meantime, if you have any questions or comments, please reach out to me. Until then, good luck and full speed ahead on your custom image compositions!
When I talk with WebSphere CloudBurst users, the topic of custom virtual images comes up frequently. In some cases they simply want to customize a shipped IBM Hypervisor Edition, and in other cases they want to create a completely custom image. Creating a customized version of an IBM Hypervisor Edition is relatively easy since we give you extend & capture in WebSphere CloudBurst. Creating a completely custom image has historically been a bit tougher, mostly owing ot the fact that there was not a standard tool or process for image assembly. I am happy to say that today's publication of the IBM Image Construction and Composition Tool changes all that.
Watch a demo of the IBM Image Construction and Composition Tool
The primary purpose of the Image Construction and Composition Tool is to enable a modular approach to virtual image construction, while taking into account the typical division of responsibilities within an organization. The tool allows the right people within an organization to contribute their specialized knowledge as appropriate to the virtual image creation process. This means OS teams can handle the OS and software teams can handle the appropriate software. A separate image builder can then use both OS and software components to meet the needs of users within the organization. Best of all, the image builder does not need intimate knowledge of how to install or configure any of the components in the image. They simply need to know which OS and software components to use.
When using the Image Construction and Composition Tool, you start by defining the base operating system you wish to use for your images. You can do this by importing an existing virtual image with an OS already installed, providing an ISO for the OS, or pointing to a base OS image on the IBM Cloud. The bottom line is that you have necessary flexibility to start with your certified or ‘golden’ operating system build. Once you have the base OS image defined in the Image Construction and Composition Tool, you can start defining custom software for use in the images you will compose.
In the tool, bundles represent the software you wish to install within a virtual image. The definition of a bundle contains two major parts: Installation and Configuration. The installation component of a bundle tells the Image Construction and Composition Tool how to install your software into the virtual image. You provide a script or set of scripts that install the necessary components into your image, and you direct the tool to call these scripts. These tasks run once during the initial creation of the virtual image, thus allowing you to capture large binaries, long-running installation tasks, or other necessary actions directly into your image.
The configuration section of a bundle defines actions that configure the software installed into the image. Like with the installation tasks, you provide a script or set of scripts for configuration tasks. Unlike installation tasks that run exactly once, configuration scripts become part of the image’s activation framework and as such, run during each image deployment. Using the tool, you can define input parameters for configuration scripts and optionally expose them so that users can provide values for the parameters at image deploy-time. Configuration tasks are important in providing flexibility that allows users to leverage a single virtual image for a number of different deployment scenarios.
Once you have your base OS image and one or more bundles defined in the Image Construction and Composition Tool, you can compose a virtual image. To compose a virtual image, you extend the base OS image and add any number of bundles into the new image. A base OS image plus a set of bundles defines a unique image.
After you define the image you want to construct, you initiate a synchronize action in the Image Construction and Composition Tool. When you start the synchronize action, the tool first creates a virtual machine in either a VMware or IBM Cloud environment (based on how you configured the tool). Next, the installation tasks of each bundle you included in the virtual image run to install the required software. Finally, the tool copies the configuration scripts from each bundle into the virtual machine and adds them to the image’s activation framework. This ensures the automatic invocation of all configuration scripts during subsequent image deployments.
Once the image is in the synchronized state, you can capture it. Capturing the image results in the creation of a virtual image based on the state of the synchronized virtual machine. The tool also automates the generation of metadata that becomes part of the virtual image package. When the capture of the virtual image completes, you can export it from the Image Construction and Composition Tool and deploy it using WebSphere CloudBurst, Tivoli Provisioning Manager, or the IBM Cloud.
I am excited for users to get their hands on the Image Construction and Composition Tool. I believe it represents the first big step in helping users to design and construct more sustainable virtual images. Did I mention it is completely free to download and use? Visit the Image Construction and Composition Tool website for more details and a download link. I look forward to your comments and feedback.
In previous posts, I have discussed the integration capability between WebSphere CloudBurst and Tivoli Service Automation Manager. Most recently, I discussed this in the context of integrating WebSphere and IBM CloudBurst. Today, I am happy to announce the publication of an article I co-wrote with Marcin Malawski from TSAM development on the subject of this integration.
If you are a WebSphere user interested in a holistic approach in building out a private cloud, I strongly recommend that you check the article out. If you are currently an IBM CloudBurst, IBM Service Delivery Manager, or Tivoli Service Automation Manager user and you provision a significant number of WebSphere environments, I strongly recommend that you check the article out. In fact, regardless of your current situation, do me a favor and check the article out!
As always, I look forward to feedback and comments. Good, bad, or indifferent. You can leave your comments here or on the article page. I look forward to hearing from you!
Though I feel like we've come a long way in some of the initial confusion surrounding IBM CloudBurst and WebSphere CloudBurst, I still get quite a few basic questions on the solutions. The two most common questions are, 'Are they different products?', and 'Can/should I use them together?'. I put together a really brief overview that answers these questions and talks about the basics of the combined solution. I hope it provides a good introduction!
One of my favorite books from childhood is If You Give a Mouse a Cookie. Although targeted at children, the book illustrates a frequently occurring human behavior that is important for all of us understand. That behavior is the tendency for escalating expectations. The book offers this up by starting out with the simple action of giving a mouse a cookie. The mouse in turn asks for a glass of milk, various flavors of cookies, and on and on, until the mouse circles back to asking for another cookie.
Nearly all of us exhibit this same kind of behavior, and it can often produce positive results. In particular, in IT we always push for the next best thing or a slightly better outcome. Personally, I am no stranger to this behavior because I experience it from WebSphere CloudBurst users quite frequently. In these cases, it usually revolves around one particular outcome: speed of deployment.
Bar none, users of WebSphere CloudBurst are experiencing unprecedented deployment times for the environments they dispense through the appliance. The fact that we say you can deploy meaningful enterprise application environments in a matter of minutes is far beyond just marketing literature. Our users prove it everyday. However, just because they are deploying things faster than ever does not mean they are content to rest on those achievements. They want to push the envelope, and I love it.
For our users looking to achieve even speedier deployment times, I offer up one reminder and one tip. First, analyze all of your script packages to ensure you are using the right means of customization. If you have some scripts that run for considerably longer than most other script packages, you may want to at least consider applying that customization by creating a custom image. You still need to adhere to the customization principles outlined here, but you may benefit from applying the customization in an image once and avoiding the penalty for applying it during every deployment. You may also be able to break this customization out with a combination of a custom image and script packages. For instance, instead of having a script that installs and configures monitoring agents, you may install the agents in a custom image and configure them during deployment. Being selective about how and when you apply customizations can go a long way in improving your deployment times.
In addition to the reminder above, I also have a tip. Take a look at all of the script packages you use in pattern deployments and look to see if there are any that you can apply in an asynchronous manner. In other words, identify customizations that need to start, but not necessarily complete as part of the deployment process. Going back to our example of configuring monitoring agents during the deployment process, it may be important to kick off the configuration script during deployment, but is it crucial to wait on the results? Maybe not. If it is not, consider defining the executable argument in your script package in a manner that kicks off the execution and proceeds -- i.e. nohup executable command &. This approach can save deployment time in certain situations.
My advice to users of WebSphere CloudBurst: keep pushing your deployment process! Pare as many minutes off the process as you can. I hope that the tips above help in that regard, and be sure to pass along other techniques that you have found helpful.
Maybe you remember, but not long ago I wrote a post about scenarios when WebSphere CloudBurst and Rational Automation Framework for WebSphere (RAFW) combine to form quite the pair. You can read that post for details, but the basic scenarios were configuring and capturing, importing existing environments into WebSphere CloudBurst, and migrating from virtual to physical installations. Well, after talking with customers and colleagues lately, you can add another scenario to the list: version-to-version WebSphere Application Server migrations.
I want to be clear here about one thing before I go further. I am in no way advocating against the use of the migration tooling that ships with WebSphere Application Server. It is an excellent tool that can make migrations simple and fast. I am merely pointing out that when it comes to version-to-version migrations you have options, and you should survey them all before making a decision.
With that understanding, let's take a look at WebSphere CloudBurst and RAFW in the context of a version-to-version migration. This integrated approach to migration is ideal if you are amenable to moving up to a newer version of WebSphere Application Server in a cloud-based environment. Using both products makes migrations fast and easy, and you can be very confident that the configuration of the migrated environment is faithful to the original. The figure below shows the basic flow of the migration and breaks it down into a set of discrete steps.
Now, for a quick break down of each step:
Extract config & apps from old environment: The first step involves pointing RAFW at your existing configuration, the one you want to migrate from, and using an out-of-the-box action to import all of the configuration into a RAFW environment. You can also import your application binaries in this step.
Store config & apps from old environment: In step two, you will store the extracted configuration and application binaries in a source control repository or some backup location separate from your RAFW server. This is an optional, but recommended step.
Analyze and update apps: Before migrating your applications to the newer version of WebSphere Application Server, you can use the completely free Application Migration Toolkit to analyze the source code of your applications. This toolkit will recommend any required updates to ensure your application continues to behave as expected when moving to the new version. Again, this is an optional step, but the toolkit is free and very handy. So, why not?
Deploy new version of the environment: Step four starts by building a new WebSphere CloudBurst pattern. This new pattern matches the topology of the environment you are migrating from, and you build it from an image containing the version of WebSphere Application Server to which you want to migrate. Once built, you deploy it to your private cloud and you have a running environment in minutes.
Apply stored config and deploy updated apps: Now that you have your new environment up and running, use RAFW to apply the configuration you extracted from your old environment. RAFW inherently understands any configuration translation that needs to occur to apply the old configuration to your new environment, and it can also deploy your updated applications for you.
That's the basic overview for version-to-version migrations when you are moving to a cloud-based environment. In time, I will be posting more information about this process to shed a little more light about what is going on under the covers. In the meantime, you know how to reach me if you have questions!
One of my favorite things to do with users or potential users of WebSphere CloudBurst is to help them understand how they can construct a custom environment using the appliance. Typically, we take one of their existing application environments and discuss the configuration steps that contribute to its makeup. From there, we map the required configuration actions to different customization capabilities in the appliance. It is one thing to talk about how you can customize every layer of your application stack with WebSphere CloudBurst, it is quite another to talk about it in the context of an existing environment. This exercise usually serves to greatly enhance a user's understanding of how to construct tailored environments with the appliance.
While I cannot take every one of you through this exercise in the context of one of your own application environments, I can propose a scenario that will help to illustrate the WebSphere CloudBurst customization process. Consider that I want to deploy a clustered WebSphere Application Server environment whose application server instances utilize WebSphere DataPower XC10 for HTTP session management. In order to deploy such an environment, I would need to do the following:
Install an OS and WAS
Install the WebSphere eXtreme Scale Client binaries - required for integration
Construct a clustered cell
Augment profiles with WebSphere eXtreme Scale profile templates
Configure the application server instances to use WebSphere DataPower XC10 for session management
So those are the steps, but how do they map to WebSphere CloudBurst? First, I know that the WebSphere Application Server Hypervisor Edition image used by WebSphere CloudBurst encapsulates the installation of the OS and WAS. I also know that WebSphere CloudBurst will automatically construct the clustered cell during the deployment process. That means I need to address the installation of client binaries, augmentation of profiles, and configuration of application server instances. In order to do this, I will use a combination of image extension and custom script packages.
To get started, I extend an existing WebSphere Application Server Hypervisor Edition image and simply install the WebSphere eXtreme Scale Client binaries. I then capture that image and store it as my own unique image in the WebSphere CloudBurst catalog. Now, you may wonder why I did not capture the profile augmentation in the custom image. Remember, you cannot change profile configuration during the extend and capture process as WebSphere CloudBurst resets the profiles as part of capturing the custom image.
My custom image encapsulates the installation of the client binaries, so now I turn to custom script packages. I need two in this case. One script package will augment a profile (either deployment manager or custom node) with the WebSphere eXtreme Scale profile template. The second script package will configure application server instances to use WebSphere DataPower XC10 for HTTP session management. Once done with these script packages, I have all the assets I need to build my target environment.
Using my custom image, I build a pattern that contains the number and kind of WebSphere Application Server nodes that I want. I use the advanced options to define a WebSphere Application Server cluster ensuring its creation happens during deployment. Next, I drag and drop the profile augmentation script onto the deployment manager and custom node parts in my pattern. Finally, I drag and drop the WebSphere DataPower XC10 configuration script onto the deployment manager. The pattern is now ready to deploy!
For those of you that are visual learners like me, this demonstration provides a nice overview of exactly what I wrote about above. Check it out and let me know what you think.
The majority of my posts on this blog address using various features of WebSphere CloudBurst to build private cloud computing environments. Today though, I want to switch gears and instead of talking private cloud, let's talk public cloud. Specifically, let's take a look at the capabilities and services delivered via the IBM Smart Business Development and Test on the IBM Cloud (hereafter referred to as the IBM Cloud).
For some of you, the fact that IBM has a public cloud offering may be a little surprising. After all, if you listen to some uninformed critics you may hear that IBM only cares about private clouds for large enterprises. That is simply untrue. The IBM Cloud is an Infrastructure as a Service public cloud that delivers rapid access to services hosted on IBM infrastructure via a self-service web portal. The IBM Cloud offers multiple payment options, including usage-based billing and reserved capacity billing, and even features a cost estimator so you can confidently establish a monthly budget for your usage.
Regardless of whether you use a private or a public cloud, security should always be a chief concern. As such, IBM takes security very seriously in the IBM Public Cloud. The infrastructure that constitutes the cloud is subject to internal IBM security policies that include regular security scans and tight administrative governance. Your data and virtual machines stay in the data center to which you provisioned them, and physical security policies match those of internal IBM data centers. Additionally, you can optionally make use of the virtual private network option to isolate access to the virtual machines that you provision on the IBM Cloud. Rest assured that security in the IBM Cloud was a guiding design principle and not an afterthought.
With the basics out of the way, let's get on to the question I'm sure you have: What can I run on the IBM Cloud? To get you started, the IBM Cloud provides a nice list of public images in its catalog that are ready for you to provision. These images include WebSphere Application Server, WebSphere sMash, DB2, WebSphere Portal Server, IBM Cognos Business Intelligence, Tivoli Monitoring, Rational Build Forge, and many more. In addition to the public images provided by the IBM Cloud, you can build your own private images. Private images allow you to start with a base public image and then customize it by adjusting the configuration or installing new software. Once customized, you can store these private images on the IBM Cloud and provision them whenever needed. Whether you are using public or private images, you have a number of server configurations to choose from in order to host your environments.
While very brief, I hope this overview provides you with some of the more important details regarding the IBM Cloud. There are few, if any, service providers out there with the enterprise expertise of IBM, and I think you see that reflected in the IBM Cloud. If you are looking at public cloud options for your enterprise application environments, you should definitely take a closer look at the IBM Cloud.
I spent most of my time growing up doing two things, going to school and playing sports. I made many fond memories -- mostly from the latter :) -- and learned more than a few lessons over that time. Of all of those lessons, there was one in particular that stuck out in both the classroom and on the baseball diamond: Sometimes you have to get back to the basics.
In that vein, I think it is time to revisit the basics of WebSphere CloudBurst. In revisiting the basics, I am not talking about the technical basics of the appliance. Rather, I am talking about revisiting exactly why WebSphere CloudBurst exists in the first place. In other words, let's take a look at the problem domains WebSphere CloudBurst addresses, and let's discuss a little bit about how the appliance does so.
A couple of weeks ago, I wrote about a sample I was working on that would allow one to apply a layer of governance to their WebSphere CloudBurst patterns. Earlier this morning, I posted the sample to the WebSphere CloudBurst Samples Gallery under the 'Sample CLI Scripts for WebSphere CloudBurst' section. The name of the new sample is 'Check WebSphere CloudBurst patterns', and you can download it here.
As hinted in my earlier post, the new sample is a simple way to check your patterns against assertions you supply in a properties file. It allows you to check that patterns contain the correct parts and scripts, and it allows you to verify that they were built from valid images. The assertion format is pretty basic, but it should be flexible enough to allow you to check patterns against a wide array of requirements. The sample archive includes a readme file that explains exactly how to use the script, and it contains a sample assertions file to give you an idea of the input syntax.
I hope this helps to address some of the requirements of many WebSphere CloudBurst users that told me they were in need of a way to apply governance to their patterns. If you have any questions about the sample, please let me know. Alternatively, if you have another idea or a problem you would like to see addressed by a sample in our gallery, please let me know.
In the course of my job, I am lucky to be able to work with both enterprise users and business partners who are adopting and using the WebSphere CloudBurst Appliance. When it comes to the business partner camp, one of my absolute favorites is the Haddon Hill Group. The Haddon Hill Group is an IBM Premier Business Partner, and they have been an early adopter and vocal advocate of the WebSphere CloudBurst Appliance. They have extensive knowledge of the use of the appliance in enterprise accounts, and quite frankly, they are doing some really cool things with WebSphere CloudBurst.
Given the above, I was glad to see summarized results from their various implementations made available recently on the IBM site. The summary is fairly concise, so I encourage you to take a look at the results Haddon Hill Group is getting with WebSphere CloudBurst.
I am not going to rehash the contents of the results here, but there are a couple of things I want to call out. First off, Haddon Hill Group says that WebSphere CloudBurst can provide companies with a '100 times faster time to market' delivery experience. In a practical sense, this means reducing the amount of time to deliver WebSphere environments from 40-60 days on average to just hours. That is an eye-opening data point!
The other thing I want call out here is a quote from Phil Schaadt, President and CTO, Haddon Hill Group. I have had the pleasure of working with Phil and team, and I have heard him echo these same sentiments many times:
"The important thing about the IBM WebSphere CloudBurst Appliance is that it will dispense a WebSphere Application Server image onto your WebSphere Application Server environment or private cloud along with other products within the WebSphere stack, and that application server will be ready in a few minutes. You can do it in a clustered environment, and you can even roll out IBM WebSphere Process Server and get it right in a fully clustered environment with a database connection, in about 90 minutes. You can also easily manage all the configurations of IBM WebSphere Process Server that you need. All the steps that took up so much time and effort on the part of IT staff have been removed. The savings for companies with large WebSphere implementations can be in the millions."
It is always great to see clients putting our technology to use to produce tangible business value. Again, I encourage you to take a look at these reports. As always, I am eager to hear what you think, so leave me a comment or reach out to me on Twitter @damrhein.
I spend most of my time talking with our users about the WebSphere CloudBurst Appliance. While I believe the appliance is somewhat of a hybrid among the Infrastructure as a Service and Platform as a Service layers of the cloud, it is definitely closer to IaaS than PaaS. Users recognize that, and they can identify the capabilities of WebSphere CloudBurst that correlate with IaaS cloud functionality.
That said, I often get questions regarding IBM and work in the PaaS arena. These include questions like, 'Is IBM planning to do anything with PaaS?', 'What is your take on PaaS?', 'What kind of applications do you plan on targeting with your PaaS offering?', and more.
Well, rest assured that IBM is definitely embracing the PaaS movement. Instead of trying to answer these questions in this post though, I want to make you aware of a recent InfoQ interview with IBM WebSphere CTO, Jerry Cuomo. In the interview, Jerry answers the questions above and much more. Jerry talks about IBM's plans for PaaS, what such a platform might look like, and how he sees IBM competing against some of the cloud players in this space.
The interview runs about a half hour, but there is a very nice table of contents that allows you to navigate to specific question/answer segments with Jerry. If you are interested in PaaS, and specifically in IBM's intention in this space, I encourage you to take a look at the interview. Let me know what you think!
One of my favorite things to do is create content that you, our users, can directly use to adopt and implement our products. Luckily for me, my job allows me to spend a considerable time doing just that for our WebSphere CloudBurst Appliance. In the course of this kind of work, I use multiple different mediums to hand over what I hope is helpful content to you. This includes blogs, articles, demos, and the WebSphere CloudBurst Samples Gallery.
While I like creating content for all of these forums, if I had to pick a favorite, I'm going to go with the samples gallery every time. The reason for this is simple. Users can download and directly use the content in the samples gallery. The samples gallery plays host to script packages, CLI scripts, and other tools that are ready to use with WebSphere CloudBurst (of course, one can also extend these or simply use them as reference). Further, the samples in the gallery are mostly direct responses to suggestions or requests I get from users regarding this type of content, thus increasing its usefulness and relevance.
A good example of the kinds of assets in the gallery is the latest script package I put out there. Recently, I was talking to a user and asked, 'What do you do every single time you establish a WebSphere Application Server environment?' He outlined a few different tasks, one of those being the creation of virtual hosts in the server's configuration. The creation of virtual hosts piqued my interest because many users do that, and the configuration logic itself is fairly consistent regardless of the administrator doing the task. Therefore, I set about creating a sample script package that you can use to create virtual host configuration in WebSphere Application Server.
The script package does two things. It creates virtual host entries, and it configures host aliases for these entries. The script allows the user to supply the data for the entries and aliases they want to create via a properties file. The properties file is pretty basic and allows for the configuration of multiple host aliases for each virtual host entry. Here is an example properties file:
The script package parses the data from a properties file like the one above, and it creates the appropriate WebSphere Application Server configuration. If you are using WebSphere CloudBurst and this kind of configuration task is common for your deployments, you may want to download this free sample. I also want to point out that there are quite a few more samples that are completely free for you to download in the gallery. Check them out and let me know what you would like to see in the samples gallery!
Looking for a reminder of the difference a year can make? If so, just take a look at the last year or so for the WebSphere CloudBurst product. Since about this time last year, we have seen the release of versions 1.1, 1.1.1, 2.0, and 220.127.116.11, each one bringing their own set of major enhancements and features. Owing to this aggressive pace, it is sometimes easy to miss out on the latest capabilities of the product. For that reason, I wanted to give a brief rundown of some (definitely not all) of the major additions to WebSphere CloudBurst over the past year.
PowerVM and z/VM support: WebSphere CloudBurst 1.1 introduced support for PowerVM (based on Power5 and Power6 systems), and version 1.1.1 introduced support for z/VM. This means that a single WebSphere CloudBurst Appliance can provision to VMware, PowerVM, and z/VM virtualization platforms.
Power7 support: WebSphere CloudBurst 18.104.22.168 introduced support for Power7 systems, thus allowing users to take advantage of the significant enhancements provided by Power7 via WebSphere CloudBurst deployments.
Expansion of the IBM Hypervisor Edition portfolio: The portfolio of images that you can deploy using WebSphere CloudBurst now includes WebSphere Application Server, WebSphere Process Server, WebSphere Portal Server, WebSphere Business Monitor, WebSphere Message Broker, and DB2. In addition to adding new images, we also expanded the platform and operating system support for existing images. For example, you can take advantage of the Red Hat Enterprise Linux OS for WebSphere Application Server Hypervisor Edition, and you can deploy WebSphere Process Server Hypervisor Edition to z/VM infrastructure.
Addition of the Intelligent Management Pack: The Intelligent Management Pack is an optional feature of the WebSphere Application Server Hypervisor Edition that allows you to take advantage of autonomic, policy-driven runtime management capabilities in your deployed environments. This includes the ability to create proactive health policies for your environments, assign SLAs to your applications, manage the update of applications, and more.
License management capabilities: In WebSphere CloudBurst version 2.0 and later, you can make use of license monitoring and management functionality. This allows you to get both point-in-time and historical views of software PVU usage within your cloud, and it allows you to setup policies concerning the usage of PVUs for WebSphere CloudBurst deployments.
Environment profiles: WebSphere CloudBurst provides quite a bit of out-of-the-box deployment automation in terms of selecting hypervisors, assigning IP addresses, and more. However, sometimes you need more control over exactly how this happens. WebSphere CloudBurst 22.214.171.124 introduced environment profiles that you can use to exercise more control over how deployment happens in WebSphere CloudBurst.
In my view, this is quite an impressive list of features delivered within a year's time. I should also reiterate that this is by no means a complete list, but just a selection of some of the major enhancements during this time. If you have any questions about the above additions, or if you have any questions on other features, please let me know.
Usually when I am discussing WebSphere CloudBurst with clients, the subject of tracking usage comes up. While 'tracking usage' is pretty broad and could apply to any number of things, we often come back to two major concepts. First, users want to be able to track compute resource usage in the WebSphere CloudBurst cloud, as this helps in cloud capacity planning. Second, users want to be able to track usage by individual WebSphere CloudBurst users in order to facilitate chargeback. In both cases, WebSphere CloudBurst provides reports that help you.
When it comes to tracking compute resource usage in your WebSphere CloudBurst cloud, the appliance provides a set of pre-defined reports on the Cloud --> Machine Activity page.
As you can see from the snapshot above, WebSphere CloudBurst provides usage reports for both memory and CPU attributed to either individual hypervisors or virtual machines. In addition, the appliance tracks storage usage by device and IP usage in your cloud. For each report type, you can specify a desired date range and let WebSphere CloudBurst produce a graph showing usage over that time. The below picture shows the report for memory usage by hypervisor over a one month period.
Tracking compute resource usage is certainly important, but if your interests are mostly about using WebSphere CloudBurst to facilitate chargeback, you likely want to know about our user reports. You can find these reports on the Cloud --> User Activity page of the appliance. On this page, you will find a table that lists each user and their usage of virtual machines, CPUs, memory, and storage over a period of time that you specify. Further, you can download a comma separated value file that contains this data for further parsing or processing on your part. The image below shows an example of the user activity table.
In addition to the user usage data provided above, many WebSphere CloudBurst users find that they want to track the amount of time users had running virtual systems deployed through WebSphere CloudBurst. While the appliance does not provide a direct report with this information, you can use this free sample to calculate virtual system duration times. This free tool uses data available in the WebSphere CloudBurst audit log (data you can process to produce any custom report you need), and it calculates virtual system duration time as well as virtual system time attributed to each user. You use the WebSphere CloudBurst CLI to invoke this tool, providing it with your start and end dates for the calculation (you can find further invocation instructions inside the ZIP file containing the tool). The image below shows example output for both the virtual system duration and user virtual system time reports.
'Tracking usage' means many different things to different people and use cases. I hope the above information regarding usage tracking in WebSphere CloudBurst gives you a good idea of what you get out of the box, as well as what you can do by using the audit log (in a similar fashion to the free tool mentioned above). If you have any questions, requests, or feedback, please let me know.
Virtual image parts play a huge role in WebSphere CloudBurst. When crafting your own customized patterns, you include anywhere from 1 to n parts from as many different virtual images as is necessary. These parts represent the different node types or personalities within a given Hypervisor Edition image, and form the basis of your pattern. When you deploy a pattern, such as the one pictured below, WebSphere CloudBurst creates a distinct virtual machine for each part.
This means that after deploying the above WebSphere Application Server pattern, you will have four virtual machines comprising your virtual system. This gives you a clean separation of concern by providing a unique container for each of your application environment nodes. This can attribute to performance optimization, increased availability, and much more. However, this approach is not suitable to all use cases. In some scenarios, especially when trying to control costs and increase consolidation, you may want to deploy a multi-node WebSphere Application Server environment within a single virtual machine. Based on what I showed you above, you might think our approach in WebSphere CloudBurst makes this impossible, but you would be overlooking an important component of patterns.
That component is of course the second building block of patterns... script packages. As you probably know, script packages allow you to supply just about any customization you want. In the case that you want a single virtual machine to host a number of WebSphere Application Server nodes, maybe even an entire cell, all you need to do is supply a script package that constructs the necessary nodes during deployment. In fact, you don't even have to write the script package. You can use the free sample in our samples gallery. As seen in the pattern below, you include this script package on a sole deployment manager part in a pattern.
The script script package provides parameters that define the node name, number of custom nodes, and number of web server nodes you want in your cell. During the deployment process, the script takes this information and constructs the cell you define. This includes creating the custom and web servers nodes and federating the custom nodes, thus completing the creation of your WebSphere Application Server cell. In this case, the script package provides deployment flexibility that is sometimes a necessity, and it is just another example of the many degrees of flexibility enabled by the script package design.
I should point out that a part in a pattern does not always map to a single node. For instance, in the case of WebSphere Process Server, there is a part that represents a complete, multi-node golden topology encapsulated within a single virtual machine. However, if you find yourself using images that do not contain these multi-node parts, rest easy knowing script packages provide you the flexibility you need.
In my last post, I concentrated on the new enhancements to WebSphere CloudBurst 126.96.36.199. One of the major new additions was the introduction of Environment Profiles, and I promised a developerWorks article would be forthcoming. The article is now live along with a demo that showcases the capability of environment profiles.
As I mentioned in my last post, environment profiles center around giving you more customization capability during the pattern deployment process. In WebSphere CloudBurst, the pattern deployment process consists of the five main steps depicted below.
Traditionally, WebSphere CloudBurst controlled the entire deployment process, thus closing it off to the deployer. Environment profiles extend the customization reach of users to be able to effect steps 1-3 in the above diagram. Specifically, environment profiles give you the following control:
Control over the assignment of IP addresses and hostnames to pattern parts: Instead of having WebSphere CloudBurst automatically assign IP addresses, and thus hostnames, to virtual machines during deployment, you can explicitly set both values during the deployment process.
Ability to deploy single patterns to multiple cloud groups: Previously, when deploying a pattern you selected a single cloud group and WebSphere CloudBurst deployed all the parts in the pattern to machines within that cloud group. While this may be okay for many cases, other cases may require you to deploy some parts of the pattern to one group of machines while other parts map to a separate set of machines. Before environment profiles, you could accomplish this with multiple patterns. With environment profiles, you can accomplish it with a single pattern.
Ability to supply virtual machine naming standards: As part of deploying a pattern, WebSphere CloudBurst creates one to many virtual machines with distinct names. Environment profiles allow you to supply a naming standard that WebSphere CloudBurst will use when creating the machines as opposed to default naming schemes previously used.
It is important to note that the use of environment profiles is completely optional, and you can continue to use the traditional deployment process, thereby leaving WebSphere CloudBurst in control. That said, the introduction of environment profiles is a direct response to consistent user feedback we received regarding the need for more control during the deployment process. Based on my user conversations, these profiles address many of said needs in an easy to use, straightforward manner. We are, of course, eager to know what you think. As always, you can let me know right here, through email, or on Twitter (@damrhein).
In keeping with the impressive release pace, WebSphere CloudBurst 188.8.131.52 is now available for download from the IBM Support site. In some ways, this release is typical of what you may expect from a service release. In other words, there are defect fixes and other general enhancements in the new version of the firmware. However, this release is a bit more than your typical service release in that there are a couple of major additions of which you should be aware.
First, starting in WebSphere CloudBurst 184.108.40.206, you will be able to provision WebSphere CloudBurst patterns to IBM Power7 systems. We already supported both Power5 and Power6 systems, and this new addition allows you to take advantage of some of the significant enhancements in the IBM Power7 hardware. In addition, this means that from a single appliance you can provision environments to multiple different releases of VMware, IBM z/VM, and IBM PowerVM hypervisor technologies. The best thing about this is that WebSphere CloudBurst provides an effective abstraction layer over the underlying infrastructure so that no matter which of the hypervisor solutions you use, the end-user experience with the appliance remains the same. You get all of this from a single device!
The other major element in WebSphere CloudBurst 220.127.116.11 is the introduction of Environment Profiles. Traditionally, WebSphere CloudBurst controlled most of the pattern deployment process. While this allows the appliance to provide a lot of configuration activity without input from the user, it made some usage scenarios hard to accommodate. For instance, historically you have not been able to assign specific IP addresses to machines in your deployment, and you have not been able to deploy a pattern across multiple cloud groups. Now, with environment profiles you can. Environment profiles give you more control over deployment behavior, including the ability to assign IP addresses (as opposed to WebSphere CloudBurst automatically doing so), deploy parts across multiple cloud groups, and apply virtual machine naming standards. The use of these new resources is completely optional, so you can still use the traditional deployment model, but this provides you with flexibility if you so choose. You can learn more about this new capability by watching the short demonstration here.
As an aside to the above information concerning WebSphere CloudBurst 18.104.22.168, I should also point out new WebSphere Hypervisor Edition announcements detailed here. I encourage you to read the announcement, but to summarize there are two major pieces of information. First, when you buy PVUs of entitlement for WebSphere Application Server Hypervisor Edition or WebSphere Message Broker Hypervisor Edition, those entitlements also apply to WebSphere Application Server and WebSphere Message Broker respectively. You can use the Hypervisor Edition images and traditional software packages in any combination, up to the level of use based on your Hypervisor Edition entitlements. Second, there is a new licensing for WebSphere Application Server Hypervisor Edition called IBM HTTP Server for WebSphere Application Server Hypervisor Edition. This allows you to deploy IBM HTTP Server instances using the WebSphere Application Server Hypervisor Edition without paying for the full Hypervisor Edition license. Again, for more details and term information, please read the announcement referenced previously.
There will be more to come about WebSphere CloudBurst 22.214.171.124, including an article on the use of environment profiles, but I wanted to give everyone a quick heads up. Let me know if you have any questions or feedback for us.
I write a lot about WebSphere CloudBurst script packages. Typically, I write about what they are, how to create them, and even provide some samples from time to time. I find that most of the time I'm either writing or talking about script packages from the standpoint that they allow you to automate the delivery of customizations to environments you deploy with WebSphere CloudBurst. More specifically, I usually explain how you can include these script packages in your patterns to ensure that your custom scripts execute as part of every pattern deployment. The truth is, that is not the whole story. In fact, it's only 1/3 of the story.
In WebSphere CloudBurst, when you define a script package you also define its execution mode. The execution mode can be one of three values, and it indicates the invocation time for the script. The default value is at virtual system creation, and that tells WebSphere CloudBurst to automatically invoke the script as part of the deployment process. This seems to be the most commonly used execution mode, and in the original version of WebSphere CloudBurst it was the only available mode (which probably attributes to why I only usually tell 1/3 of the story here). As you may expect, there is a wide range of usage scenarios for this class of script packages including installing applications, activating monitoring agents, registering cells with an externally managed DNS server, and much more.
If you are like me (and many humans), you enjoy and actually expect symmetry. In that regard, it probably comes as no surprise that there is a script package execution mode called at virtual system deletion. As the name indicates, this class of script packages executes as an automatic part of the virtual system deletion process. When a user tells WebSphere CloudBurst to remove a virtual system, before it shuts down the machines in the system, it will run each script package marked to execute at virtual system deletion. Typical use cases for these scripts include removing information about the cell from externally managed DNS servers, freeing up connections with external systems, and other external 'clean up' activities.
So this leaves the final execution mode for script packages, the when I initiate it mode to be precise. This class of script packages executes when explicitly triggered by a user. In the virtual machine detail section for a deployed virtual system, you can see a list of user-initiated script packages for a given machine. There is a start button by each of the user-initiated script packages that allows you to invoke the script when, and as many times as you need to. While these script packages have many different use cases, the most common use case is to deploy application updates. Users build these application update scripts, attach them to a pattern, and invoke them whenever they want to deliver an updated application into their already deployed environment.
WebSphere CloudBurst script packages are one of the main vehicles for delivering your customizations to your cloud environments. The three execution modes mentioned above allow you to determine when the right time to deliver those customizations is.