Locking the door and throwing away the key!
anthonyv 2000004B9K Visits (6675)
Many years ago I picked up a book that literally blew my mind. It was the Cuckoo's Egg by Clifford Stoll and it's a genuine classic, a true tale of hackers and how one was tracked down in the very early days of the internet.
Now the story is about events in 1986, so it captures the state of technology at the time (which rather dates the book), but wow, what a great story.
So why mention the book? Well apart from the fact that it is well worth a read, the key issue that Clifford saw again and again was default passwords. The hacker would identify a target and then try to logon using default IDs and default passwords, usually with great success.
Now I have blogged in the past about the determined (but often ignored) way that Brocade switches berate you into changing default passwords. But pretty well all products need to do this, as they all have the same issue (and a truly problematic counter-point). You absolutely need to do two things with every product in your data center:
Now don't laugh, but forgotten/lost passwords on data center kit (like switches) is a VERY common problem. When I worked in the IBM Storage Support team I took calls EVERY WEEK from clients who had devices they could not logon to, for all manner of reasons. For some, supplying them with the default passwords saved them (and condemned their employer?), but for others they needed much more detailed assistance.
The reason I started thinking about this is a nice tool IBM offer for the Storwize V7000 called the Initialization Tool that you can download from here. Using this tool you can reset the password of the Superuser ID on a Storwize V7000 back to the default (passw0rd). The tool runs on a USB key. After requesting the tool to help you to reset the superuser password, you insert the USB key into the Storwize V7000, wait for the orange indicator light on the relevant node canister to stop blinking and the task is complete. Then put the USB key back into your laptop and run the init tool again to get a completion report that should look like this:
This is great to rescue customers who have lost their passwords, but the question then gets raised: Can I block this?
My first response is: if you are concerned abou
What we can do is prevent password reset via USB key (or in the case of the SVC, via the front panel). We do this by issuing the following CLI command: setpwdreset -disable
In the following example, I confirm that password reset is possible (value 1), I then disable it and confirm that password reset is no longer possible (value 0). If curious I could then get some help on that command:
I then try to reset the password with the USB key, but I get a very different message when I run the init-tool after moving the USB key back to my laptop:
If I then change my mind, I can enable password reset via this command:
So do I recommend you do this on your machine?
Only if your paranoia is matched by your attention to detail.
My reason to hesitate recommending it is simple: If you prevent password reset and then forget your password (and have no other local Security Administrator accounts), you have locked the door and thrown away the key. Far better to physically lock the rack.
In the end though, your company needs to set a policy that is actively enforced (with no exceptions). So get to it.