I'm happy to announce that IBM Rational's RP252 Advanced Disciplined Agile Delivery (DAD) workshop
is now available. This is a 3-day, hands-on workshop which teaches students the fundamentals of Disciplined Agile Delivery (DAD)
. This workshop is offered both publicly and privately.
There is a distinct rhythm, or cadence, at different levels of the agile process. We call this the agile 3C rhythm, for coordinate, collaborate, and conclude (which is sometimes called stabilize). The agile 3C rhythm occurs at three levels in Disciplined Agile Delivery (DAD):
- Day. A typical day begins with a short coordination meeting, called a Scrum meeting in the Scrum method. After the daily coordination meeting the team collaborates throughout most of the day to perform their work. The day concludes with a working build, hopefully you had several working builds throughout the day, which depending on your situation may require a bit of stabilization work to achieve.
- Iteration. DAD construction iterations begin with an iteration planning session (coordinate) where the team identifies a detailed task list of what needs to be done that iteration. Note that iteration modeling is often part of this effort. Throughout the iteration they collaborate to perform the implementation work. They conclude the iteration by producing a potentially consumable solution, a demo of that solution to key stakeholders, and a retrospective to identify potential improvements in the way that they work.
- Release. The DAD lifecycle calls out three explicit phases - Inception, Construction, and Transition – which map directly to coordinate, collaborate, and conclude respectfully.
The agile 3C rhythm is similar conceptually to Deming’s Plan, Do, Check, Act (PDCA) cycle:
- Coordinate maps to plan
- Collaborate maps to do
- Conclude maps to check and act
Modified by ScottAmbler
IBM Rational recently published an update to my Agility@Scale e-book, which can be downloaded free of charge. The e-book is a 21 page, 2.3 meg PDF (sorry about the size, guess the graphics did it) . It overviews the Agile Scaling Model (ASM) (which has since been replaced by the Software Development Context Framework (SDCF) ), Disciplined Agile Delivery (DAD), the scaling factors of agility at scale, and ends with some advice for becoming as agile as you can be. In short it's a light-weight coverage of some of the things I've been writing about in this blog the past couple of years. Could be a good thing to share with the decision makers in your organization if they're considering adoption agile strategies.
Modified by ScottAmbler
One of the scaling factors called out in the Software Development Context Framework (SDCF) is domain complexity. The general idea is that agile teams will find themselves in different situations where some teams are developing fairly straightforward solutions, such as an informational website, whereas others are addressing very complex domains, such as building an air-traffic control system (ATCS). Clearly the team building an ATCS will work in a more sophisticated manner than the one building an informational website. I don't know whether agile techniques have been applied in the development of an ATCS, although I have to think that agile's greater focus on quality and working collaboratively with stakeholders would be very attractive to ATCS delivery teams, I do know that agile is being applied in other complex environments: The 2009 Agility at Scale Survey found that 18% of respondents indicated that their organizations had success at what they perceived to be very complex problem domains,.
Increased domain complexity may affect your strategy in the following ways:
Reaching initial stakeholder consensus becomes difficult. One of the risk reduction techniques called out in Disciplined Agile Delivery (DAD) is to come to (sufficient) stakeholder consensus at the beginning of the project during the Inception phase (called Sprint 0 in Scrum or Iteration 0 in other agile methods). Stakeholder consensus, or perhaps "near concensus" or "reasonable agreement" are better terms, can be difficult to come to the more complex the problem domain is because the stakeholders may not fully understand the implications of what they're making decisions about and because there is likely a greater range of stakeholders with differing goals and opinions. The implication is that your project initiation efforts may stretch out, increasing the chance that you'll fall back on the old habits of big requirements up front (BRUF) and incur the costs and risks associated with doing so.
Increased prototyping during inception. It is very common for disciplined agile teams to do some light-weight requirements envisioning during inception to identify the scope of what they're doing and to help come to stakeholder consensus. The greater the complexity of the domain, and particularly the less your team understands about the domain, the more likely it is that you'll benefit from doing some user interface (UI) prototyping to explore the requirements. UI prototyping is an important requirements exploration technique regardless of paradigm, and it is something that you should consider doing during both initial requirements envisioning as well as throughout the lifecycle to explore detailed issues on a just in time (JIT) manner.
Holding "all-hands reviews". One strategy for getting feedback from a wide range of people is to hold an "all hands review" where you invite a large group of people who aren't working on a regular basis with your team to review your work to date. This should be done occasionally throughout the project to validate that the input that you're getting from your stakeholder represenatives/product owners truly reflects the needs of the stakeholders which they represent. The 2010 How Agile Are You? Survey found that 42% of "agile teams" reported running such reviews.
Increased requirements exploration. Simple modeling techniques work for simple domains. Complex domains call for more complex strategies for exploring requirements. The implication is that you may want to move to usage scenarios or use cases from the simpler format of user stories to capture critical nuances more effectively. A common misunderstanding about agile is that you have to take a "user story driven approach" to development. This is an effective strategy in many situations, but it isn't a requirement for being agile.
The use of simulation. You may want to take your prototyping efforts one step further and simulate the solution. This can be done via concrete, functional prototypes, via simulation software, via play acting, or other strategies.
Addition of agile business analysts to the team. Analysis is so important to agile teams we do it every day. In situations where the domain is complex, or at least portions of the domain is complex, it can make sense to have someone who specializes in exploring the domain so as to increase the chance that your team gets it right. This is what an agile business analyst can do. There are a few caveats. First, even though the domain is complex you should still keep your agile analysis efforts as light, collaborative, and evolutionary as possible. Second, this isn't a reason to organize your team as a collection of specialists and thereby increase overall risk to your project. The agile analyst may be brought on because their specialized skills are required, but the majority of the people on the team should still strive to be generalizing specialists. This is also true of the agile analyst because their may not be eight hours a day of valuable business analysis work on the team, and you don't want the BA filling in their time with needless busy work.
The important thing is to recognize that the strategies which work well when you're dealing with a simple domain will not work well for a complex domain. Conversely, techniques oriented towards exploring complex domains will often be overkill for simple domains. Process and tooling flexiblity is key to your success.
- Does the team regularly produce value for their stakeholders?
- Does the team validate its own work to the best of its ability?
- Are stakeholders actively involved?
- Is the team self organizing?
- Does the team strive to improve their process?
Some interesting results include:
94% of teams which are claiming to be agile are providing value to stakeholders on a regular basis.
87% of teams which are claiming to be agile are validating their own work.
95% of teams which are claiming to be agile are working closely with stakeholders.
56% of teams which are claiming to be agile are self organizing.
88% of teams which are claiming to be agile are improving the process that they follow throughout the lifecycle.
Teams which are claiming to be agile often aren't. 53% of "agile teams" meet the five criteria, although 72% meet all but the self-organization criteria.
Teams which are moving towards agile but aren't there yet are reasonably close. 39% of those teams meet all five criteria and 63% meet all but self-organization.
I believe that there are several important implications:
- Whenever someone claims to be on an agile team you may want to explore that claim a bit deeper.
The low level of self organization may be an indicator of cultural challenges with organizations in that their project managers aren't giving up sufficient control. The Agility at Scale survey
in November 2009 found that 59% of respondents who indicated that their organization hadn't adopted agile techniques yet that a rigid culture was hampering their efforts. The IT Governance and Project Management
survey in July 2009 discovered that "questionable behaviors", many of which were ethically questionable (I'm being polite), were far too common within IT project management.
Although "agile teams" may not be as agile as they claim, they're still doing better than traditional V-model teams, as revealed (again) by the 2010 IT Project Success
If there was some sort of consensus within the agile community as to the criteria for determining whether a team is agile, I highly suspect that the agileness ratings would increase over time. What gets measured often improves.
However, how agile you are isn't anywhere near as important as getting better at what you're doing. So perhaps I'm barking up the wrong tree on this issue. ;-)
Timo Tenhunen has recently published his master's thesis, Challenges in Scaling Agile Software Development
, and has been kind enough to make it available online. I suspect you'll find it to be an interesting read.
People who are new to agile are often confused about how agile teams address architecture, but luckily we're seeing more discussion around agile architecture
now in the community so this problem is slowly being addressed from what I can tell. But, what I'm not seeing enough discussion about, at least not yet, is how is enterprise architecture addressed in the overall agile ecosystem. So I thought I'd share some thoughts on the subject, based on both my experiences over the years (see the recommended resources at the bottom of this posting) as well as on an enterprise architecture survey
which I ran in January/February 2010.
My belief is that effective enterprise architecture, particularly in an agile environment, is:
- Business driven. Minimally your EA effort should be driven by your business, not by your IT department. Better yet it should be business owned, although this can be a challenge in many organizations because business executives usually aren't well versed in EA and view it as an IT function. Yes, IT is clearly an important part of EA but it's not the entirety of EA nor is it the most critical part. In many organizations the IT department initiates EA programs, typically because the business doesn't know to do so, but they should quickly find a way to educate the business in the need to own your organization's EA efforts.
- Evolutionary. Your enterprise architecture should evolve over time, being developed iteratively and introduced incrementally over time. An evolutionary approach enables you act on the concrete feedback that you receive when you try to actually implement it, thereby enabling you to steer its development successfully.
- Collaborative. The EA survey clearly pointed to "people issues" being critical determinants of success, and of failure, of EA programs. My experience is that the best enterprise architects, just like the best application architects, work closely with the intended audience of their work, both on the business side of things as well as on the IT side. They will "roll up their sleeves" and become active members of development teams, often in the role of Architecture Owner on agile teams or Architect on more traditional teams. Their mission is to ensure that the development teams that they work with leverage the EA, to mentor developers in architecture skills, and to identify what works and what doesn't in practice so that they can evolve the EA accordingly. Enterprise architects, architects in general, who don't participate actively on development teams (holding architecture reviews isn't active participation) run the risk of being thought of as "ivory tower" and thus easy to ignore.
- Focused on producing valuable artifacts. The most valuable artifacts are useful to the intended audience, are light weight, and ideally are executable. Many EA programs run aground when the enterprise architects focus on artifacts that they've always wanted but that development teams really aren't very excited about -- yes, it might be interesting to have a comprehensive comparison of cloud technologies versus mainframe technologies, but a collection of reusable services would be fare more interesting to them. A detailed enterprise data model indicating suggested data attributes would be intellectually interesting to develop, but a list of legacy data sources with a high-level description of their contents would be immediately valuable to many development teams. A detailed model depicting desired web services would be useful, but an actual collection of working services that I can reuse now would be even better.
- An explicit part of development. In Disciplined Agile Delivery (DAD) architectural activities are an explicit part of the overall delivery process. Part of the architectural advice is that delivery teams should work closely with their organization's enterprise architects so that they can leverage the common infrastructure, and sometimes to help build it out, effectively. Disciplined agile teams realize that they can benefit greatly by doing so.
The Agile Scaling Model (ASM)
calls out addressing enterprise disciplines, such as enterprise architecture, as one of eight scaling factors which may apply to a given project. The interesting thing about this scaling factor is that it's the only one where things get potentially easier for development teams when we move from the simple approach, having a project focus, to the more complex approach, where we have an enterprise focus. By having a common infrastructure to build to, common guidelines to follow, and valuable artifacts to reuse project teams can benefit greatly. So, I guess my advice is to seriously consider adding enterprise disciplines to your agile strategy.Recommended Resources:
My new paper Scaling Agile: An Executive Guide
is now available. As the title suggests the paper overviews how to scale agile strategies to meet your organization's unique needs. The executive summary:
Agile software development is a highly collaborative, quality-focused approach to software and systems delivery, which emphasizes potentially shippable working solutions produced at regular intervals for review and course correction. Built upon the shoulders of iterative development techniques, and standing in stark contrast to traditional serial or sequential software engineering methods, agile software delivery techniques hold such promise that IBM has begun to adopt agile processes throughout its Software Group, an organization with over 25,000 developers. But how can practices originally designed for small teams (10-12) be “scaled up” for significantly larger operations? The answer is what IBM calls “agility@scale.”
There are two primary aspects of scaling agile techniques that you need to consider. First is scaling agile techniques at the project level to address the unique challenges individual project teams face. This is the focus of the Agile Scaling Model (ASM).
Second is scaling your agile strategy across your entire IT department, as appropriate. It is fairly straightforward to apply agile on a handful of projects, but it can be very difficult to evolve your organizational culture and structure to fully adopt the agile way of working.
The Agile Scaling Model (ASM) defines a roadmap for effective adoption and tailoring of agile strategies to meet the unique challenges faced by a software and systems delivery team. Teams must first adopt a disciplined delivery lifecycle
that scales mainstream agile construction techniques to address the full delivery process, from project initiation to deployment into production. Then teams must determine which agile scaling factors
– team size, geographical distribution, regulatory compliance, domain complexity, organizational distribution, technical complexity, organizational complexity, or enterprise discipline, if any — are applicable to a project team and then tailor their adopted strategies accordingly to address their specific range of complexities.
When scaling agile strategies across your entire IT organization you must effectively address five strategic categories — the Five Ps of IT
: People, principles, practices, process, and products (i.e., technology and tooling). Depending on your organizational environment the level of focus on each area will vary. What we are finding within many organizations, including IBM, is that the primary gating factor for scaling agile across your entire organization is your organization’s ability to absorb change.
When you are first adopting agile techniques in your organization a common strategy is to run one or more pilot projects. When organizing these projects you typically do as much as you can to make them successful, such as finding:
- Projects where the stakeholders are willing to actively work with you.
- IT people who are flexible, willing to try new things, and willing to collaborate with one another.
- IT people who are generalizing specialists, or at least willing to become so.
- Finding a project which is of medium complexity (therefore it's "real" in the sense that it's significant to your organization) but not one where it can make or break your organization (therefore it's safe to experiment with).
In North America we refer to this as "cherry picking" because you're picking the cherry/best situation that you can find.
- Being agile may not have been the primary determinant of success. You set up an environment where you have a good relationship with your stakeholders, where you have good people who want to work together, and the project is challenging but not impossible. Oh, and by the way you adopted a few agile techniques as well. Sounds to me that situation you could have adopted a few not-so-agile techniques instead and still succeed. Although my various project success surveys, see my IT surveys page for details, have shown time and again that agile project teams are more successful than traditional project teams I haven't been able to tease out (yet) whether this success is attributable to agile or just attributable to improved project initiation efforts.
- When adopting agile/lean widely across your organization, you can't cherry pick any more. For the past few years I've been working with IT organizations that are in the process of adopting agile/lean strategies across their entire organization, not just across a few pilot projects. What these organizations are finding is that they need to find ways to adopt agile where the business isn't as willing to work with IT, where some of the people aren't so flexible or collaborative, where some of the people are narrowly specialized and not as willing to expand their skills, or where the project exhibits scaling factors which motivates you to tailor your agile approach. It's harder to succeed with agile in these situations because they're not as "cherry" as what you've experienced previously. Luckily, if you've been successful previously then you now have some agile experienced people, you have successes to reference, and you've likely overcome some problems even in the cherry situations which you have learned from. So, your cherry successes will hopefully improve your ability to succeed even in "non cherry" situations.
- You need to work smarter, not harder. If the source of your success was actually from improved project initiation practices and not from agile, then recognize that and act accordingly. Realistically part of your success was from that and part was from agile, and the organizations that adopt a measured improvement approach potentially have the data to determine which practices lead to success and which didn't. Without the metrics you're effectively flying blind when it comes to deciding how to improve. There is clearly a mandate for smarter work practices within IT, within your organization as a whole for that matter.
If you want to gain more insight into some of the issues that you'll face when adopting agile across your organization, I suspect that you'll find my recent paper Scaling Agile: An Executive Guide
to be interesting. I've got a more detailed paper in the works, so stay tuned to this blog.
Modified by ScottAmbler
An imporant step in scaling your agile strategy is to adopt a Disciplined Agile Delivery (DAD)
approach instead of one which is just focused on agile construction. One aspect of adopting a DAD approach it to mature your focus from just producing software to instead providing a solution which meets the needs of its stakeholders within the appropriate economic, cultural, and technical constraints. The fundamental observation is that as IT professionals we do far more than just develop software. Yes, this is clearly important, but in addressing the needs of our stakeholders we will often:
Provide new or upgraded hardware
Change the business/operational processes which stakeholders follow
Change the organizational structure in which our stakeholders work
Update supporting documentation
And yes, develop high-quality software
Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "soft skills" such as user interface design and process design to name just two.
The shift to a solution-oriented focus from a software-oriented focus requires your agile teams to address some of the software-oriented prejudices which crept into the Agile Manifesto
. The people who wrote the manifesto (which I fully endorse) were for the most part software developers, consultants, and in many cases both. It is little wonder that this group would allow a bias towards software development creep into the language of their manifesto.
activities are evolutionary (iterative and incremental) and highly collaborative in nature. Initially requirements are explored at a high level via requirements envisioning
at the beginning of the project and the details are explored on a just-in-time (JIT) basis via iteration modeling
and model storming
activities. The way that you perform these agile practices, and the extent to which you do so, depends on the situation in which a project team finds itself. The Agile Scaling Model (ASM)
is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size. To see how this works, let's apply the concepts of the ASM to see how we would scale our agile approach to requirements.
First, let's consider how a small, co-located team would work. The first two categories of the ASM are core agile development and disciplined agile delivery
, the focus of both are small co-located teams in a fairly straightforward situation. In these situations simple techniques such as user stories
written on index cards and sketches on whiteboards
work very well, so the best advice that I can give is to stick with them. Some teams will take a test-driven development
(TDD) approach where they capture their requirements and design in the form of executable specifications
, although this sort of strategy isn't as common as it should be (yet!), likely because of the greater skill and discipline that it requires. Traditionalists often balk at this approach, believing that they need to document the requirements in some manner. But, for a small co-located team working in a collaborative manner, requirements documentation proves to be little more than busy work, often doing nothing more than justifying the existence of a business analyst who hasn't made the jump to agile yet. Don't get me wrong, there are good reasons to write some requirements documentation, and we'll see this in a minute, but you should always question any request for written specifications and try to find more effective ways to address the actual goal(s) motivating the request. Never forget that written documentation
is the least effective communication
option available to you.
Although inclusive tools
such as whiteboards and paper work well for requirements, for development activities you will need electronic tools. You will either put together an environment from point-specific tools or adopt something more sophisticated such as IBM Rational Team Concert (RTC)
which is already fully integrated and instrumented. RTC is a commercial tool, but luckily you can download a 10-license environment free of charge, which is just perfect for a small team. Larger teams, of course, will need to purchase licenses. One of the things that a disciplined agile delivery approach adds to core agile development is it addresses the full delivery life cycle, which is important because it explicitly includes pre-construction activities such as requirements envisioning. The first step in scaling agile techniques is to adopt a full delivery life cycle which covers the full range of activities required to initiate a project, produce the solution, and then release to solution to your end users.
More interesting is the third category of the ASM, Agility@Scale, and how its eight agile scaling factors
affect the way that you tailor your process and tooling strategy. Let's explore how each one could potentially affect your agile requirements strategy:
- Geographical distribution. The majority of agile teams are distributed in some manner -- some people are working in cubicles or private offices, on different floors, in different buildings, or even in different countries -- and when this happens your communication and coordination risks goes up. To counter this risk you will need to perform a bit more requirements envisioning up front to help ensure that everyone is working to the same vision, although this doesn't imply that you need to write detailed requirements speculations which would dramatically increase the risk to your project. Remember, agilists do just barely enough modeling and are prepared to iteratively elicit the details when they need to do so. The more distributed the team is the more likely they will need to adopt software-based requirements modeling tools such as IBM Rational Requirements Composer (RRC) which supports streamlined, agile requirements elicitation throughout the delivery life cycle. Index cards and whiteboards are great, but they're difficult to see if you're outside the room where they're posted. I've written a fair bit about distributed agile development in this blog.
- Team size. Some organizations, including IBM, are successfully applying agile techniques with teams of hundreds of people. A team of one hundred people will naturally work much differently than a team of ten people, or of one thousand people. Large teams are organized into collections of smaller teams, and the requirements for the overall project must be divvied up somehow between those teams. The implications are that as the team size grows you will need to invest a bit more time in initial requirements envisioning, and in initial architecture envisioning for that matter; you will need to use more sophisticated tools; and may need to use more sophisticated modeling techniques such as use cases and functional user interface prototypes. See large agile teams for more advice.
- Compliance requirement. When regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable you are likely going to be required to capture requirements specifications in some manner and to enact traceability between those requirements. However, I highly recommend that you read the actual regulations yourself and don't let bureaucrats interpret them for you (doesn't it always seem that their interpretation always results in an onerous, documentation heavy solution?) because I have yet to run into a regulation which required you to work in an ineffective manner. Managing your requirements as work items in RTC can often more than meet your regulatory requirements for documentation and traceability, although you may want to consider a tool such as IBM Rational RequisitePro for complex regulatory situations.
- Domain complexity. The manner in which you elicit requirements for a data entry application or an informational web site will likely be much simpler than for a bio-chemical process monitoring or air traffic control system. More complex domains will require greater emphasis on exploration and experimentation, including but not limited to prototyping, modeling, and simulation. Although user stories may be effective as a primary requirements artifact in simple domains, in more complex domains you are likely to find that you need to drive your requirements effort with more sophisticated modeling techniques.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. In these cases, particularly where the work is strictly organized between the various organizations (perhaps for security concerns), you may need a more sophisticated approach to managing the requirements. RTC enables you to organize the requirements between teams, and then to automatically track progress in real time via the RTC project dashboard.
- Technical complexity. The technical complexity of a solution can vary widely, from a single platform silo application to a multi-platform application working with legacy systems and data to a full-blown systems engineering effort. Complex technical domains, just like complex business domains, require more complex strategies for requirements elicitation and management. The requirements for your legacy systems are likely to have been captured using tools and techniques appropriate for that platform, for example the requirements for your COBOL application may have been captured using data flow diagrams and data models, whereas the requirements for your Java legacy application where captured using UML diagrams. The subteam working on the COBOL system might be using IBM Rational Application Developer (RAD) and RTC for Z whereas the Java subteam may use Eclipse with RTC. Because systems engineering projects can stretch on for years, particularly when the hardware is being developed in parallel to the software, sophisticated tooling such as IBM Rational DOORS is often used in these situations. For more information about systems engineering, see the IBM Rational Harmony process.
- Organizational complexity. Your approach to requirements elicitation and management will be affected by a host of organizational complexities, including your corporate culture. When the culture is flexible and collaborative you can be very agile in your approach to requirements, but as it becomes more rigid you become more constrained in what is considered acceptable and thus take on greater project risk. For example, many organizations still struggle with their approach to funding projects, often demanding that the project team provides an "accurate" estimate up front to which they will be held to. This in turn motivates risky behavior on the part of the development, including a "big requirements up front (BRUF)" approach where a detailed requirements speculation is developed early in the project. This is just one example of how questionable corporate culture can impact the way in which an agile team works.
- Enterprise discipline. Some organizations have enterprise-level disciplines, such as enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management in place. These disciplines can easily be agile and from what I can tell the more successful efforts appear to lean more towards the agile end of the spectrum rather than the traditional end. Having an enterprise business modeling effort underway will affect your project-level requirements strategy -- you'll be able to leverage existing models, have access to people who understand the domain at an enterprise level, and will likely need to map your project efforts back to your enterprise models. The enterprise modelers will likely be using tools such as IBM Rational System Architect or IBM Websphere Business Modeler.
It is important to note that the way that you tailor the agile practices that you follow, and the tools that you use, will reflect the situation that you find yourself in. In other words, you need to right size your process and the Agile Scaling Model (ASM) provides the context to help you do so. As you saw above, in simpler situations you will use the simpler tools and techniques which are commonly promoted within the core agile development community. But, when things become a bit more complex and one or more of the scaling factors applies you need to modify your approach -- just don't forget that you should strive to be as agile as you can be given the situation that you find yourself in.
Modified by ScottAmbler
In 2009 I wrote a white paper entitled The Agile Scaling Model (ASM): Adapting Agile Methods for Complex Environments for IBM Rational. Apparently it's been taken down, which I think is unfortunate as it contains some interesting ideas that your organization may be able to benefit from.
The original white paper addresses several key issues:
It provides and explains a definition for disciplined agile delivery. A more up to date discussion of DAD can be found on the Disciplined Agile Delivery site.
It describes criteria to determine is a team is agile. I've explored this issue via several surveys over the years since then. See the January 2013 How Agile Are You? results.
It describes the ASM, which distinguishes between core agile development techniques, disciplined agile delivery strategies, and agility at scale. The ASM was superceded in early 2013 by the Software Development Context Framework (SDCF). Perhaps this is why the ASM paper was taken down??
It overviews the eight scaling factors which a delivery team may face, scaling factors which motivate changes in the process that you will follow and the tools that you will adopt. The SDCF provides my recent thoughts regarding scaling factors. I have also run various IT Surveys over the years exploring how well organizations fare at scaling agile.
It describes the implications of the ASM. My blog posting Scaling Agile: Start with a Disciplined Foundation covers this very well.
It argues that you should strive to be as agile as you need to be, and that will be driven by the situation that you face.
The Agile Scaling Model (ASM) is a contextual framework for effective adoption and tailoring of agile practices to meet the unique challenges faced by a system delivery team of any size.
The ASM distinguishes between three scaling
- Core agile development. Core agile methods, such as Scrum and Agile Modeling, are self governing, have a value-driven system development lifecycle (SDLC), and address a portion of the development lifecycle. These methods, and their practices, such as daily stand up meetings and requirements envisioning, are optimized for small, co-located teams developing fairly straightforward systems.
- Disciplined agile delivery. Disciplined agile delivery processes, which include Dynamic System Development Method (DSDM) and Open Unified Process (OpenUP), go further by covering the full software development lifecycle from project inception to transitioning the system into your production environment (or into the marketplace as the case may be). Disciplined agile delivery processes are self organizing within an appropriate governance framework and take both a risk and value driven approach to the lifecycle. Like the core agile development category, this category is also focused on small, co-located teams delivering fairly straightforward systems. To address the full delivery lifecycle you need to combine practices from several core methods, or adopt a method which has already done so.
- Agility at Scale. This category focuses on disciplined agile delivery where one or more scaling factors are applicable. The eight scaling factors are team size, geographical distribution, regulatory compliance, organizational complexity, technical complexity, organizational distribution, domain complexity, and enterprise discipline. All of these scaling factors are ranges, and not all of them will likely be applicable to any given project, so you need to be flexible when scaling agile approaches to meet the needs of your unique situation. To address these scaling factors you will need to tailor your disciplined agile delivery practices and in some situations adopt a handful of new practices to address the additional risks that you face at scale.
The first step in scaling agile approaches is to move from partial methods to a full-fledged, disciplined agile delivery process. Mainstream agile development processes and practices, of which there are many, have certainly garnered a lot of attention in recent years. They’ve motivated the IT community to pause and consider new ways of working, and many organizations have adopted and been successful with them. However, these mainstream strategies (such as Extreme Programming (XP) or Scrum, which the ASM refers to as core agile development strategies) are never sufficient on their own; as a result organizations must combine and tailor them to address the full delivery life cycle. When doing so the smarter organizations also bring a bit more discipline to the table, even more so than what is required by core agile processes themselves, to address governance and risk.
The second step to scaling agile is to recognize your degree of complexity. A lot of the mainstream agile advice is oriented towards small, co-located teams developing relatively straightforward systems. But once your team grows, or becomes distributed, or you find yourself working on a system that isn’t so straightforward, you find that the mainstream agile advice doesn’t work quite so well – at least not without sometimes significant modification. Each of the scaling factors introduces their own risks, and when addressed effectively can actually reduce project risk, and for your project team to succeed you will want to identify the scaling factors applicable to the situation that you face and act accordingly. Unfortunately, this is a lot easier said (OK, in this case blogged about) than done.
IBM Rational advocates disciplined agile delivery as the minimum that your organization should consider if it wants to succeed with agile techniques. You may not be there yet, still in the learning stages. But our experience is that you will quickly discover how one or more of the scaling factors is applicable, and as a result need to change the way you work.
In the early days of agile, the applications where agile development was applied were smaller in scope and relatively straightforward. Today, the picture has changed significantly and organizations want to apply agile development to a broader set of projects. Agile hence needs to adapt to deal with the many business, organization, and technical complexities today’s software development organizations are facing. This is what Agility@Scale is all about – explicitly addressing the complexities which disciplined agile delivery teams face in the real world.These agile scaling factors which we've found to be important are:
- Team size. Mainstream agile processes work very well for smaller teams of ten to fifteen people, but what if the team is much larger? What if it’s fifty people? One hundred people? One thousand people? Paper-based, face-to-face strategies start to fall apart as the team size grows.
- Geographical distribution. What happens when the team is distributed, perhaps on floors within the same building, different locations within the same city, or even in different countries? Suddenly effective collaboration becomes more challenging and disconnects are more likely to occur.
- Compliance requirement. What if regulatory issues – such as Sarbanes Oxley, ISO 9000, or FDA CFR 21 – are applicable? These issues bring requirements of their own that may be imposed from outside your organization in addition to the customer-driven product requirements.
- Enterprise discipline. Most organizations want to leverage common infrastructure platforms to lower cost, reduce time to market, and to improve consistency. To accomplish this they need effective enterprise architecture, enterprise business modeling, strategic reuse, and portfolio management disciplines. These disciplines must work in concert with, and better yet enhance, your disciplined agile delivery processes.
- Organizational complexity. Your existing organization structure and culture may reflect traditional values, increasing the complexity of adopting and scaling agile strategies within your organization. To make matters worse different subgroups within your organization may have different visions as to how they should work. Individually the strategies can be quite effective, but as a whole they simply don’t work together effectively.
- Organization distribution. Sometimes a project team includes members from different divisions, different partner companies, or from external services firms. This lack of organizational cohesion can greatly increase the risk to your project.
- Technical complexity. Some applications are more complex than others. It’s fairly straightforward to achieve high-levels of quality if you’re building a new system from scratch, but not so easy if you’re working with existing legacy systems and legacy data sources which are less than perfect. It’s straightforward to build a system using a single platform, not so easy if you’re building a system running on several platforms or built using several disparate technologies. Sometimes the nature of the problem that your team is trying to address is very complex in its own right.
Each factor has a range of complexities, and each team will have a different combination and therefore will need a process, team structure, and tooling environment tailored to meet their unique situation. Further reading:
An inhibitor that I run into again and again within organizations that are still in the process of adopting agile development techniques is something that I call the "We're Special" anti-pattern. The people involved believe that their situation is special, that some unique factor in their environment makes it all but impossible to adopt agile techniques, and therefore they need to continue to work in the manner that they've always worked, regardless of the obvious inefficiencies of doing so.
An organization suffers from this agile adoption anti-pattern when they start giving domain-based or technology-based excuses for why they can't become more agile. For example, I've heard bank employees claim that "Agile works fine for building web sites, but we're building financial systems therefore agile won't work for us", telecom employees claim "Agile works fine for building financial systems, but we're building embedded systems therefore agile won't work for us", and government employees claim "Agile works fine for embedded systems, but we're building web sites therefore agile won't work for us." Needless to say I often struggle to not roll my eyes.
The reality is that the business domain that you're working in doesn't dictate your ability to adopt agile strategies. I've seen very successful agile projects in banks, insurance companies, manufacturing companies, retail companies, pharmacueticals (yes, life critical applications), telecoms, and government agencies. I've also met people working in those domains claim that they're special because of the inherent challenges of the domain.
Similarly, technology isn't an issue. I've seen project teams that were successful at applying agile approaches using Java, VB, COBOL, C, Linux, Windows, System Z, on PCs, and so on. Granted, some technology platforms suffer from a plethora of "agile tooling", PL/1 comes to mind and I'm sure that there's a few more niche platforms where this is the case, but with a little online searching it's often possible to find good open source tools out there (or what's stopping you from starting such a project?).
The primary issues around agile adoption are cultural in nature. Can you become more flexible in your thinking? Can you become more disciplined (agile requires greater levels of discipline than traditional approaches)? Can you build a collaborative environment with your business stakeholders? Can you move away from bureaucratic processes to ones which focus on adding real value? Can you invest in your IT staff to give them modern development skills required for test-driven development (TDD), continuous integration, and agile database techniques (to name a few)? Addressing the "people issues", the cultural issues, is the hard part of moving towards agile.
If you're looking for valid excuses for why your organization can't move to agile, here's some valid adoption inhibitors that I see in organizations all the time:
- Our project management office (PMO) has been trained and certified in traditional strategies and struggles to come to grips with agile project management techniques
- We don't have the funding to train, educate, and mentor people in agile techniques
- Middle management is threatened by agile strategies because their role clearly needs to change
- Senior technical staff, in particular our architects, don't accept the need to roll up their sleeves and be actively involved on project teams
- Our IT governance effort is not itself being governed effectively and is all but out of control, focusing on bureaucracy instead of enabling development teams to succeed
- Our data management group insists on working in a serial and documentation heavy manner
- Our QA/testing group insists on detailed requirement specifications
- Our staff is overly specialized, resulting in numerous hand-offs between analysts, developers, architects, testers, and so on
The above list is just the tip of the iceberg. The point is that the real problems that you face are cultural in nature, not domain-based nor technology-based. It is possible to overcome these inhibitors to success, but you need to understand that you're suffering from them, what the implications are, and how to overcome them. This is one of the facets of the Health Assessment portion of our new Measured Capability Improvement Framework (MCIF) service, the goal of which is to help organizations improve their internal IT processes. Although MCIF isn't specifically about becoming more agile, the reality is that there are a lot of great agile practices out there, and some of them are good options for your organization. Assuming of course you get over your misconception that you're special for some reason and instead accept the need that you've got some hard slogging ahead of you to improve your IT game.Further reading:
A common goal of IT governance is to determine the productivity of various techniques, tools, and people as part of the overall effort to improve said productivity. If you can easily measure productivity you can easily identify what is working for you in given situations, or what is not working for you, and adjust accordingly. A common question that customers ask me is how do you measure productivity on agile teams. Although you could use traditional strategies such as function point (FP) counting, or another similar strategy, this can require a lot of effort in practice. Remember that we don't only want to measure productivity, we want to do so easily. Ideally it would be nice to do so using information already being generated by the team and therefore we won't add any additional bureaucratic overhead.
A common metric captured by agile teams is their velocity. Velocity is an agile measure of how much work a team can do during a given iteration. At the beginning of an iteration a team will estimate the work that they're about to do in terms of points. At the beginning of a project the team will formulate a point system, which typically takes a few iterations to stabilize, so that they can consistently estimate the work each iteration. Although the point system is arbitrary, my team might estimate that a given work item is two points worth of effort whereas your team might think that it's seven points of effort, the important thing is that it's consistent. So if there is another work item requiring similar effort, my team should estimate that it's two points and your team seven points. With a consistent point system in place, each team can accurately estimate the amount of work that they can do in the current iteration by assuming that they can achieve the same amount of work as last iteration (an XP concept called "yesterday's weather"). So, if my team delivered 27 points of functionality last iteration we would reasonably assume that we can do the same this iteration.
So, is it possible to use velocity as a measure of productivity? The answer is not directly. For example, we have two teams, A and B, each of 5 people and each working on a web site and each having two-week long iterations. Team A reports a velocity of 17 points for their current iteration and team B a velocity of 51 points. They're both comprised of 5 people, therefore team B must be three times (51/17) as productive as team A. No! You can't compare the velocity of the two teams because they're measuring in different units. Team A is reporting in their points and B in their points, so you can't compare them directly, The traditional strategy would be to ask the teams to use the same unit of points, which might be a viable strategy with two teams although likely not if you have twenty agile teams and particularly not if you have two hundred teams. Regardless of the number of teams that you have it would minimally require some coordination to normalize the units and perhaps even some training and development and support of velocity calculation guidelines. Sounds like unnecessary bureaucracy that I would prefer to avoid. Worse yet, so-called "consistent" measurements such as FPs are anything but because there's always some sort of fudge factor involved in the process which will vary by individual estimator.
An easier solution exists. Instead of comparing velocities you instead calculate the acceleration of each team. For example, consider the reported velocities of each team below. Team A's velocity is increasing over time whereas team B's velocity is trending downwards. All things being equal, you can assume that team A's productivity is increasing whereas B's is decreasing. Of course it's not wise to manage simply by the numbers, so instead of assuming what is going on I would rather go and talk with the people on the two teams. Doing so I might find out that team A has adopted quality-oriented practices such as continuous integration and static code analysis which team B has not, indicating that I might want to help team B adopt these practices and hopefully increase their productivity.
Team A: 17 18 17 18 19 20 21 22 22 ...Team B: 51 49 50 47 48 45 44 44 41 ...
There are several advantages to using acceleration as an indicator of productivity over traditional techniques such as FP counting:1. It's easy to calculate
. For example, the acceleration of team A from iteration 1 to iteration 6 is (20-17)/17 = 0.176 whereas for team B it is (45-51)/51 = -.118. Of course, you don't need to calculate the acceleration over such a long period of time, you could do it iteration by iteration, although I find that doing it over several iterations gives a more accurate value. You'll need to experiment to determine what works for you.2. It is inexpensive
. Acceleration is based on information already being collected by the team, their velocity, so there is no extra work to be done by the team. 3. It is unlikely to be gamed
. Teams aren't motivated to fake their velocity because it provides them with important information required to manage themselves effectively. 4. It is easy to automate
. For example, Rational Team Concert (RTC)
calculates velocity automatically from its work item list (an extension of Scrum's product backlog) and does trend reporting via it's web-based project reporting functionality, providing a visual representation of the team's acceleration (or deceleration as the case may be).5. It offers the opportunity for more effective governance
. This approach reflects three of the practices of Lean Development Governance
: Simple and Relevant Metrics, Continuous Project Monitoring, and Integrated Lifecycle Environment.6. You can easily adjust for changing team size
. If the size of a team varies over time, and it will, this metric falls apart the way that I've described it. To address this issue you need to normalize it by dividing by the number of people on the team to get the average acceleration per team member.7. You can easily monetize this metric
. By knowing the acceleration of the project team and knowing how much they're spending each iteration, you can estimate the amount of money you're saving through process improvement. For example, if you're spending $100,000 per iteration and your acceleration is 2%, your cost savings is $2,000 per iteration.
Of course, nothing is perfect, and there are a few potential disadvantages:1. It is an indirect measure of productivity
. Truth be told velocity really is a productivity measure, it's just that because it's measured in different units it's difficult to compare between teams. Acceleration is merely an indicator of the change in productivity.2. You actually need to measure what you're interested in
. When you step back and think about it, you're not really interested in measuring your productivity, regardless of what the metrics wonks have been telling you the past few decades. In this case what you really want to know is your change in productivity because your real goal is to improve your productivity over time, which is what acceleration actually measures.3. Management must be flexible
. For this to be acceptable senior management must be willing to think outside the "traditional metrics box". Using a non-standard, simple metric to calculate productivity? Preposterous! Directly measuring what you're truly interested in instead of calculating trends over long periods of time? Doubly preposterous!4. Your existing measurement program may be questioned
. Once management learns how easy it can be to obtain metrics which enables them to truly govern software development projects they may begin to question the investment that they've made in the past in overly complex and expensive metrics schemes. This can be dangerous for the metrics professionals in your organization, particularly if your metrics group doesn't have valid measurements around the value of their own work. Ummmmm....5. The terminology sounds scientific
. Terms such as velocity and acceleration can motivate some of us to start believing that we understand the "laws of IT physics", something which I doubt very highly that as an industry we understand. All it would take is for someone to start throwing around terms like "standard theory" and "unified model" and we'd really be in trouble. Wait a minute..... ;-)
In summary, measuring the acceleration of development teams is an easy to collect, straightforward measure of team productivity. I hope that I've given you some food for thought, and would be eager to hear about your experiences applying this metric in practice.
The popular Agile literature can often seam naive when it comes to how Agilists work with project stakeholders:- Extreme Programming (XP) has a practice called On-Site Customer where one or more people work closely with your team to provide information and to make decisions in a timely manner.- Scrum has the role of Product Owner who is the one single person that the development team goes to for decisions about requirements. - Agile Modeling (AM) has the practice of Active Stakeholder Participation which extends On-Site Customer to get the stakeholder(s) actively involved with the modeling effort through the use of inclusive tools and techniques.
These are great strategies for small, co-located teams doing straightforward development, but they quickly fall apart at scale. This occurs for several reasons:1. Stakeholders are a diverse group. Your stakeholders include end users, business management, project funders, enterprise architects, operations staff, support staff, other system development teams, and many others. Different people have different, and often contradictory, requirements and they certainly have different priorities. It's questionable whether a single person, or a handful of persons, can adequately represent this diverse group.2. One person becomes a bottleneck. Even with a small co-located team this is a problem, let alone one that is geographically distributed or one that is very large. There's no way that a single person can be available 24/7 in a responsive manner to support distributed teams.3. It's a difficult role. The Product Owner/Customer (POC) is responsible for representing the business to the development team. They're making important decisions on a regular basis, decisions which they'll be held accountable for.4. One person becomes a serious project risk. Not only is it questionable whether a single person can fairly represent all stakeholders, even if they could what happens if you lose that person? They effectively become a single point of failure for your team.
To scale this role, consider the following strategies:1. Recognize the true scope of the POC role. Not only are they stakeholder proxies they also are a development team representative to the stakeholder community as a whole. As stakeholder proxies they'll make decisions and prioritize the work, they'll run requirements elicitation sessions, they'll negotiate priorities, and they'll put the development team in contact with stakeholders who have expertise in specific aspects of the domain. As team representatives they'll often demo the current version of the system to other stakeholders, communicate the status of the project to people, and respond to various requests for information from the stakeholders.2. Have multiple people in it. A single POC works well for small, co-located teams developing simple software. At scale you'll soon discover that you need multiple people in this role so that they don't become a bottleneck. For distributed teams it's common to see each subteam have one or more POCs who are managed by a primary/chief POC. The primary POC typically works on the coordinating team with the chief architect (I'll talk about this role in a future blog posting) and the program manager (also a topic for a future blog posting).3. Train them in business analysis skills. The person(s) in the POC role need good business analysis skills. If fact, it's common for people who were formerly BAs for traditional teams to step into the POC role, particularly with BAs who originally come from the business side of your organization. This strategy has its advantages and disadvantages. As a BA they've likely got solid business knowledge but their instincts may motivate them to take a documentation-driven approach to providing information to the development team instead of a collaboration-based approach. Be careful.4. Consider the full system development lifecycle. There's far more to the POC role than supporting the development team during Construction iterations. During "Iteration 0", the Inception phase for an Agile RUP project or the warm-up phase for an Eclipse Way project, the POC(s) will often lead the initial requirements envisioning efforts. The product backlog, or better yet your work item list, needs to come from somewhere after all. During the release iteration(s), the Transition phase for RUP or the End-Game phase for Eclipse Way, the POC(s) will focus on communicating the upcoming release to the stakeholder community, will be actively involved with any final user acceptance testing (UAT), and may even be involved with training end users.
In my January 2008 column in Dr Dobb's Journal, posted at http://www.ddj.com/architect/204801134 , I provide detailed advice about how to scale the way that you work with stakeholders on Agile projects by applying the practices of Agile Model Driven Development (AMDD). There's no magic solution, you just need to choose to organize yourself effectively. The good news is that you can easily work with stakeholders at scale.[Read More
Modified by ScottAmbler
The following diagram summarizes a safe and proven strategy for scaling agile delivery strategies at the team level. There are three features of this strategy:
- Basic agile and lean methods. At the base are methods such as Scrum, Extreme Programming (XP), Agile Modeling, Kanban, Agile Data, and many others. These methods are the source of practices, principles, and strategies that are the bricks from which a team will build its process.
- Disciplined Agile Delivery (DAD). Building on mainstream methods is the DAD process decision framework, providing an end-to-end approach for agile software delivery. DAD provides the process mortar required to combine the process bricks, effectively doing the “heavy lifting” to describe how all of these great agile strategies fit together.
- Agility at scale. Teams operating at scale apply DAD in a context driven manner to address the scaling factors that they face. These teams may be large, they may be geographically distributed in some way, they may face compliance constraints, they may be addressing a complex domain or technical environment, or they may be organizationally distributed in some manner. And usually combinations thereof. Without the solid foundation provided by DAD, agility at scale is incredibly difficult to achieve.
To scale agile successfully you must be able to tailor your approach to reflect the context that you face. To do this you must understand what your process and organizational structure options are and what tradeoffs each of those options has. Unless you’re a process expert, this can be challenging. This is where DAD’s process goal strategy comes in. Instead of prescribing a single way to do things, as we see in methods such as Scrum and SAFe, DAD instead captures your options in terms of process goals and guides you through making the decisions that best address the situation that you find yourself in. An example of a process goal diagram, in this case for the Inception phase goal Explore Initial Scope, is shown below.
The critical thing is that with a goal-driven approach it becomes much easier to understand how to scale agile. Depending on the context of the situation that a team finds itself in you will address each goal differently. The strategy for a small, co-located team facing a fairly straightforward situation in a non-regulatory environment works well for that team, the same strategy prescribed to a team in a different situation would put that team at risk of failure. Instead of prescribing a single way of working that is optimized for a specific situation we need to instead allow, and better yet enable, teams to adopt strategies that reflect the context of the situation that they face.
We’ve found that four of the twenty-two process goals seem to take about 80% of the tailoring impact. These goals are:
- Explore Initial Scope. This is sometimes referred to as initially populating the backlog in the Scrum community, but there is far more to it than just doing that. This is an important goal for several reasons. First, your team needs to have at least a high level understanding of what they’re trying to achieve, they just don’t start coding. Second, in the vast majority of organizations IT delivery teams are asked fundamental questions such as what are you trying to achieve, how long will it take, and how much will it cost. Having an understanding of the scope of your effort is important input into answering those sorts of questions.
- Identify Initial Technical Strategy. This is sometimes referred to as initial architecture envisioning or simply initial architecture modeling. You want to address this process goal for several reasons . First, the team should think through, at least at a high level, their architecture so as to identify a viable strategy for moving forward into Construction. A little bit of up-front thinking can increase your effectiveness as a team by getting you going in a good direction early in the lifecycle. It can also help to avoid injection of unnecessary technical debt as a result. Second, the team should strive to identify the existing organizational assets, such as web services, frameworks, or legacy data sources that they can potentially leverage while producing the new solution desired by their stakeholders. By doing this you increase the chance of reuse, thereby avoiding adding technical debt into your organizational ecosystem, and more importantly you reduce the time and cost of delivering a new solution as the result of reuse. You will do this by working with your organization’s enterprise architects, if you have any. This is an aspect of DAD’s philosophy of working in an enterprise aware manner.
- Move Closer to a Deployable Release. This Construction phase process goal is important for three reasons. First, it encompasses the packaging aspects of solution development (other important development aspects are addressed by its sister goal Produce a Potentially Consumable Solution). This includes artifact/asset management options such as version control and configuration management as well as your team’s deployment strategy. Second, it provides deployment planning options, from not planning at all (yikes!) to planning late in the lifecycle to the more DevOps-friendly strategies of continuous planning and active stakeholder participation. Third, this goal covers critical validation and verification (V&V) strategies, many of which push testing and quality assurance “left in the lifecycle” so that they’re performed earlier and thereby reducing the average cost of fixing any defects.
- Coordinate Activities. Although it is nice to believe that all of the coordination required by an agile team can be handled with a 15 minute stand up meeting every day the truth is far from that. This process goal addresses strategies for coordinating the work within a team, coordinating with other development teams (if needed), coordinating with IT groups such as your Enterprise Architects or data management group, and coordinating between subteams a programme or portfolio.
For a more detailed discussion of how these four process goals are the key to scaling your agile software delivery process, please refer to the whitepaper Scaling Agile Software Development: Disciplined Agile Delivery at Scale.
On Twitter one of the people that I follow recently tweeted in jest "I am waste". He had been tweeting about the problem that people will often pay consultants for their advice yet will not follow that advice once it's been provided (yet will often still keep paying for more advice). Perhaps in this situation his efforts were a waste, or perhaps the real issue was that the customer had a long learning process and hadn't yet come to the point where they were willing to act on the advice, we may never know. But I have to think that there are other situations where this person isn't a waste, regardless of his claims.
This got me thinking that something is a waste in one context yet in another context may be quite valuable. Or, as the old saying goes, one man's trash is another man's treasure.
For example, consider the following simple value stream:
[Activity A: 10 min] [Wait time: 20 min] [Activity B: 10 min]
Without considering the context, the wait time of 20 min represents 50% waste in the overall process that we should try to eliminate.
What if that wait time provides people with a much needed rest? With time to contemplate? With time to destress? Eliminating that wait time, or even reducing it, could result a degradation of performance. In this case, one person's waste (the wait time) is another person's treasure (rest time). The implication is that we need to work closely with the people intimately involved in a process if we're to help them to improve it.
Modified by ScottAmbler
On April 25, 2013 I gave a webcast for the Global Rational User Community entitled Disciplined Agile Delivery: Going beyond Scrum . During the webcast a large number of questions were asked but unfortunately I couldn’t get to all of them. So I’ve taken the opportunity to write up the answers in this blog posting.
Fequently asked questions. Many of the questions are addressed in the DAD FAQ.
DAD elevator pitch - I will be starting work in a couple of weeks for a company that has just started its Agile journey this year by implementing Scrum. What would Scott put in an elevator chat as to why they should be moving towards DAD. The Disciplined Agile Delivery (DAD) decision process framework is a people-first, learning-oriented hybrid agile approach to IT solution delivery. It has a risk-value delivery lifecycle, is goal-driven, is enterprise aware, and is scalable. There are clearly some interesting aspects to the DAD framework. DAD is a hybrid approach which extends Scrum with proven strategies from Agile Modeling (AM), Extreme Programming (XP), Unified Process (UP), Kanban, Lean Software Development, Outside In Development (OID) and several other methods. DAD is a non-proprietary, freely available framework. DAD extends the construction-focused lifecycle of Scrum to address the full, end-to-end delivery lifecycle from project initiation all the way to delivering the solution to its end users. It also supports lean and continuous delivery versions of the lifecycle: unlike other agile methods, DAD doesn’t prescribe a single lifecycle because it recognizes that one process size does not fit all. DAD includes advice about the technical practices such as those from Extreme Programming (XP) as well as the modeling, documentation, and governance strategies missing from both Scrum and XP. But, instead of the prescriptive approach seen in other agile methods, including Scrum, the DAD framework takes a goals-driven approach. In doing so DAD provides contextual advice regarding viable alternatives and their trade-offs, enabling you to tailor DAD to effectively address the situation in which you find yourself. By describing what works, what doesn’t work, and more importantly why, DAD helps you to increase your chance of adopting strategies that will work for you. The article Introduction to Disciplined Agile Delivery provides a more detailed description.
The book: Could you please repeat the name of the book that Scott is talking about? The book is Disciplined Agile Delivery: A Practitioner’s Guide to Agile Software Delivery in the Enterprise published by IBM Press, June 2012. The Disciplined Agile Delivery (DAD) website and the Disciplined Agile Consortium website are also good DAD resources.
The Surveys: Where is the data published about geographic distribution and effectiveness? All of my survey data, the original questions as asked, and my analysis can be downloaded free of charge from my IT Surveys page. If you ever see a request from me to fill out a survey, please take a few minutes and do so. I think you'll agree that my surveys page is in fact a very useful resource, so please contribute when you can.
Project success criteria: Where would a goal of defining success criteria fall? In the DAD book we describe how the success criteria for the project should be initially identified during Inception. Success criteria, like other things, could evolve throughout the project. You might find the IT Process Success Surveys to be of interest as several of them explored what success criteria projects actually have. Interestingly, its rarely “on time, on budget, to specification”.
Transitioning to DAD: How would you typically phase a DAD implementation, let's say in a project pilot where they haven't been exposed yet to Agile? Same question, any variance if the development team has already started Scrum? This is a fairly complex question to answer. The short story is that you need to invest some time to understand what your strengths and weaknesses are so that you can identify what you need to focus on. You will then likely need to pilot strategies/techniques which are new to your organization before rolling them out widely. You may also need to invest in training and coaching/mentoring depending on your needs. My company, Scott Ambler + Associates, offers these sorts of services and more for organizations interesting in adopting disciplined agile strategies.
Skills: I am aware that ideally developer should also be able to test but in reality theses are usually separate roles. Is it in line with your beliefs\suggestions? Many organizations that are new to agile still have roles that reflect their existing strategy. Non-agile approaches often have people in specific roles such as programmer, tester, designer, and so on. In DAD we promote a different set of agile roles that reflect agile thinking. The implication is that you’re going to have to help individuals transition over to the new way of thinking, something we cover in Chapter 4 of the DAD book. You might also find Mark Lines' blog, No role in DAD for an Analyst? to provide some insights into issues surrounding the transition from traditional to agile roles.
Teaming: What happens with the Product Owner and the Architecture Owner don’t Agree? See my blog What Happens When People Don’t Agree
Skillsets: Different people of the team have different skills, experience, and time horizons. We can't all be generalists, can we? There are several agile roles in DAD, each of which have different rights, responsibilities, and skillsets. So we’re not promoting the idea that everyone have the same skillset. However, we do promote the philosophy that people should strive to be T-skilled generalizing specialists so as to improve their productivity.
Teaming: What are your thoughts on team cohesion? Teams will gel over time. Being co-located helps. Having people who are dedicated 100% to the team helps. Building a team of people who want to be there helps. Self organization helps.
Tool support: Is there an RMC plug-in for DAD + Is there any software behind DAD... or some software that supports it... such as Jazz (RTC) for Agile/Scrum? Yes, IBM Rational does in fact have an RMC plug in for DAD. There is also a template for Microsoft TFS from RDA Corp, Software Development Expert’s Practices Advisor supports DAD comprehensively, and I’m currently working with MethodPark to do so too. Stay tuned to the Disciplined Agile Delivery website for information about tool support.
Governance: Regarding enterprise governance and enterprise IT, how do you start taking a culture that imposes common-process, common-tools, central (often outsourced) IT services, and heavyweight stage/gate across all organizations, and get that evolving toward a (still enterprise aware) lean/agile approach? This is a hard one. I’m often called into organizations to help with this very issue. The challenge is that you need to have a deep understanding of IT governance techniques as well as how to govern agile teams. Governance is something we discussed in detail in the DAD book as well as on the DAD site, see Adopting Agile Governance Requires Discipline.
Executable specifications: TDD was mentioned, can you comment on Behavior Driven Development (BDD) and any impact on this lifecycle? BDD is a slight nuance to acceptance test-driven development (ATDD). BDD/ATDD and TDD are both potential practices that you might choose to follow on a DAD team. I’ve written a fair bit about agile testing and quality strategies and about TDD in detail.
Architecture: When does the first version of architecture gets established and what would require to establish it? You typically start thinking about architecture early in a DAD project during Inception following a practice called architecture envisioning. I’ve also written a fair bit about agile architecture techniques and the potential misconceptions about agile architecture that you may find interesting.
Travel plans: Will you be coming to South Africa at some point? The good news is that Mark Lines, my co-author, will be in South Africa the week of May 20 in Joburg and the following week in Capetown. Contact us for details. I hope to be visiting SA later this year but exact dates haven’t been set yet. So, please stay tuned on Twitter at @scottwambler for further announcements.
Other travel plans: If you'd like me to speak at a local event, including corporate conferences or training events, please contact me.