Agility@Scale: Strategies for Scaling Agile Software Development
Timo Tenhunen has recently published his master's thesis, Challenges in Scaling Agile Software Development , and has been kind enough to make it available online. I suspect you'll find it to be an interesting read.
ScottAmbler 120000HESD Tags:  devops disciplined-agile-deliver... agility-at-scale 14,170 Visits
I recently recorded an audio podcast about Collaborative Development and Operations (DevOps) and how it relates to Disciplined Agile Delivery (DAD). The podcast is 17 minutes long and covers a range of topics including:
For some reason, it seems as if everyone's grandfather at one point in time recommended to use the right tools for the job. That's practical wisdom from my point of view, one that is certainly an issue for agile development.
One of the primary messages, I hope, of the Agile Scaling Model (ASM) is that context counts. Although the focus of the ASM is on describing a contextual framework for tailoring your process to meet the needs of the situation that you find yourself in, it's also applicable to your tooling selection. For example, the tool choices of a co-located team will be much different than that of a geographically distributed team. A co-located team will likely use a whiteboard or paper for their agile modeling efforts, whereas distributed team members may need to capture their diagrams using a more sophisticated tool such as Rational Requirements Composer (RRC) so that their work can be shared electronically. Having said that, RRC would be overkill for a co-located team (unless they had regulatory compliance issues). Different teams, different situations, therefore different tooling choices.
One of the concerns that I run into from customers is that some of our legacy products don't support agile very well. Once again, it's a matter of context because many of our legacy products reflect the realities faced by more traditional teams. The challenge occurs when you try to take a legacy product which is well suited for traditional development, such as Rational ClearCase, and try to apply it on agile projects. Although ClearCase makes sense in certain scaling situations, particularly very large teams that are geographically distributed, you'd be better advised to use something like Rational Team Concert (RTC) for configuration management on most agile teams (note that RTC does far more than just SCM).
So, if you're taking an agile approach you should consider Rational tools such as RTC, RRC, Rational BuildForge, Rational AppScan, and others which support agile development. Granted, some you would only use at scale -- for example Buildforge is a good option in really complex environments, but if you don't face that complexity then you'll likely find that RTC's build engine is sufficient. Similarly, if you're taking a traditional approach to development then you'll likely consider products such as ClearCase, Appscan, RTC, and Rational Software Architect (RSA) instead. Different situations, different tooling choices.
What's even more confusing is that some products support a range of process paradigms. For example, RTC supports agile, lean, iterative, and traditional approaches to development. The same can be said of Appscan and several other products. Notice how I listed RTC and Appscan for both agile and traditional development above.
So, if anyone tells you that Rational tools don't support agile development don't believe them. Ask them which tools that they're talking about, and ask them if they're aware of the Rational products that do support agile development. Context counts.
ScottAmbler 120000HESD Tags:  whitepaper agile disciplined-agile-deliver... agility-at-scale 16,125 Visits
My new white paper, Disciplined Agile Delivery: An Introduction, is now available free of charge from IBM.com. The paper overviews the Disciplined Agile Delivery (DAD) process framework, a hybrid comprised of strategies from Scrum, XP, Agile Modeling, and other agile methods which is people first, learning oriented, and enterprise aware. DAD is the basis from which you can scale agile.
I hope you enjoy this whitepaper. Stay tuned for more information about DAD in the coming months. Also, the Disciplined Agile Delivery website is now up.
ScottAmbler 120000HESD Tags:  agility-at-scale disciplined-agile-deliver... agile e-book sdcf 11,267 Visits
IBM Rational recently published an update to my Agility@Scale e-book, which can be downloaded free of charge. The e-book is a 21 page, 2.3 meg PDF (sorry about the size, guess the graphics did it) . It overviews the Agile Scaling Model (ASM) (which has since been replaced by the Software Development Context Framework (SDCF) ), Disciplined Agile Delivery (DAD), the scaling factors of agility at scale, and ends with some advice for becoming as agile as you can be. In short it's a light-weight coverage of some of the things I've been writing about in this blog the past couple of years. Could be a good thing to share with the decision makers in your organization if they're considering adoption agile strategies.
ScottAmbler 120000HESD Tags:  product-management discipilnedagiledelivery safe testing agility-at-scale scaled-agile agile agileexec agile-exec architecture 4,724 Visits
I recently wrote a detailed article about Large Agile Teams that was a detailed walkthrough of how to structure agile teams of various sizes. I suspect that this is the most comprehensive online discussion of this topic. The article addressed the following topics:
I welcome any feedback that you may have about Large Agile Teams.
A common misunderstanding about agile software development approaches are that they're only applicable to small, co-located teams. Yes, it's much easier to be successful with small teams, and with co-located teams, and as a result agilists being smart people prefer to work this way. After all, why take on extra risk when you don't need to do so? But, sometimes reality gets in the way and you find yourself in a situation where you need a large team, or you need to distribute your team (see previous blog postings for strategies for distributed agile development), and you would still like to be as agile as possible. The good news is that it's still possible to be agile with a large team, although you will need to go beyond some of the popular "agile in the small" strategies to succeed.
Here are some disciplined agile strategies to succeed at large-team agile:
ScottAmbler 120000HESD Tags:  agility-at-scale goverance lean agileexec whitepaper 10,391 Visits
I'm happy to announce that a revised version of the Lean Development Governance white paper which I co-wrote with Per Kroll is now available. This version of the paper reflects our learnings over the past few years helping organizations to improve their governance strategies.
There's a more detailed description of the paper here.
ScottAmbler 120000HESD Tags:  modeling agility-at-scale agileadopt requirements 8 Comments 9,681 Visits
Contrary to popular belief, agile development teams do in fact model and yes, they even do some up front requirements and architecture modeling. Two of the best practices of Agile Modeling are Requirements Envisioning and Architecture Envisioning where you spend a bit of time at the beginning of the project doing enough initial modeling to get you going in the right direction. The strategy is to take advantage of modeling, which is to communicate and think things through without taking on the risks associated with detailed specifications written early in the lifecycle. In this blog posting I will focus on requirements envisioning, in a future posting I'll cover architecture envisioning.
The goal of initial requirements envisioning is to identify the scope of your effort. You need to do just enough modeling early in the project to come to stakeholder concurrence and answer questions such as what you're going to build, roughly how long it's going to take (give a range), and roughly how much it's likely to cost (once again, give a range). If you can get the right people together in the room, which can sometimes be a logistics challenge but not one that you couldn't choose to overcome, there are very few systems (I suspect less than 5%) that you couldn't initially scope out in a few days or a week. I also suspect that most of the remaining systems could be scoped out with less than 2 weeks of modeling, and if not then I'd take that as an indication that you're taking on too large of a project. I'm not saying that you'll be able to create big detailed specifications during this period, and quite frankly given the problems associated with "Big Requirements Up Front (BRUF)" you really don't want to, but I am saying that you could gain a pretty good understanding of what you need to do. The details, which you'll eventually need, can be elicited throughout the lifecycle when you actually need the information. A common saying in the agile community is that requirements analysis is so important for us that we do it every single day, not just during an initial phase. I'll discuss just in time (JIT) approaches to requirements modeling in a future posting.
To envision the requirements for a business application, you might want to consider creating the following models:
For small teams simple tools such as whiteboards and paper are usually sufficient for requirements envisioning. But what happens at scale? What if you're working on a large agile team, say of 50 people, 200 people (IBM has delivered software into the marketplace with agile teams of this size), or even 500 people (IBM currently has teams of this size applying agile techniques)? What if your team is distributed? Even if you have people working on different floors of the same building, let alone working from home or working in different cities or countries, then you're distributed (see my postings about distributed agile development). Suddenly whiteboards and paper-based tools (index cards, sticky notes, ...) aren't sufficient. You're still likely to use these sorts of tools in modeling sessions with stakeholders, but because of one or more scaling factors you need to capture your requirements models electronically.
In January Theresa Kratschmer and I gave a webcast entitled Agile Requirements: Collaborative, Contextual, and Correct which overviewed agile approaches to requirements elicitation and management, including requirements envisioning. We also showed how Rational Requirements Composer (RRC) can be used to electronically capture critical requirements information, enabling you to address the needs of large and/or distributed agile teams, while still remaining lightweight and flexible. I suspect that you'll find the webcast to be very illuminating and RRC something that you want to take a look at (the link leads to a trial version). Of course RRC can be used in other situations as well, but that's not what I'm focused on right now.
Teams which find themselves in regulatory environments will likely need to do more than just use RRC, as might very large teams. Regulatory compliance often requires more complex requirements documentation, which in turn requires more sophisticated tools such as DOORS or Requisite Pro, and I would consider using those tools in the types of situations that warrant it. One of the things that people often struggle to understand about agile approaches is that you need to tailor your strategy to reflect the situation at handle. One process size does not fit all, so you will end up using different tools and creating different artifacts to different extents in different situations. Repeatable results, not repeatable processes, is the rule of the day.
ScottAmbler 120000HESD Tags:  agileadopt disciplined-agile-deliver... agile manifesto agility-at-scale 19 Comments 34,373 Visits
This article has been replaced by an official "Disciplined Agile Manifesto".
The text of the original article remains below.
I've recently been working with Mark Lines of UPMentors and we've had some interesting discussions around evolving the Agile Manifesto which I thought I would share here to obtain feedback. Note that this is not any sort of official position of IBM, nothing in my blog is by the way (unless explicitly stated so), nor is it some sort of devious plot to take over the agile world (although if we did have some sort of devious plot, we'd make the exact same claim). What we hope to accomplish is to put some ideas out there in the hopes of getting an interesting conversation going.
Updates Since this Was First Published:
ScottAmbler 120000HESD Tags:  disciplined-agile-deliver... agileexec agile agility-at-scale risk rup phases governance 6 Comments 8,301 Visits
The explicit phases of the Unified Process -- Inception, Elaboration, Construction, and Transition -- and their milestones are important strategies for scaling agile software development to meet the real-world needs of modern organizations. Yes, I realize that this is heresy for hard-core agilists who can expound upon the evils of serial development, yet these very same people also take a phased approach to development although are loathe to admit it. The issue is that the UP phases are like seasons of a project: although you'll do the same types of activities all throughout a project, the extent to which you do them and the way in which you do them change depending on your goals. For example, at the beginning of a development project if you want to be effective you need to do basic things like identify the scope of the project, identify a viable architecture strategy, start putting together your team, and obtain support for the project. Towards the end of a project your focus is on the activities surrounding the deployment of your system into production, including end-of-lifecycle testing efforts, training, cleaning up of documentation, piloting the system with a subset of users, and so on. In between you focus on building the system, including analysis, design, testing, and coding of it. Your project clearly progresses through different phases, or call them seasons if the term phase doesn't suit you, whether your team is agile or not.
The UP defines four phases, each of which address a different kind of risk:1. Inception. This phase focuses on addressing business risk by having you drive to scope concurrence amongst your stakeholders. Most projects have a wide range of stakeholdres, and if they don't agree to the scope of the project and recognize that others have conflicting or higher priority needs you project risks getting mired in political infighting. In the Eclipse Way this is called the "Warm Up" iteration and in other agile processes "Iteration 0".2. Elaboration. The goal of this phase is to address technical risk by proving the architecture through code. You do this by building and end-to-end skeleton of your system which implements the highest-risk requirements. Some people will say that this approach isn't agile, that your stakeholders should by the only ones to prioritize requirements. Yes, I agree with that, but I also recognize that there are a wide range of stakeholders, including operations people and enterprise architects who are interested in the technical viability of your approach. I've also noticed that the high-risk requirements are often the high-business-value ones anyway, so you usually need to do very little reorganization of your requirements stack.3. Construction. This phase focuses on implementation risk, addressing it through the creation of working software each iteration. This phase is where you put the flesh onto the skeleton.4. Transition. The goal of this phase is to address deployment risk. There is usually a lot more to deploying software than simply copying a few files onto a server, as I indicated above. Deployment is often a complex and difficult task, one which you often need good guidance to succeed at.
Each phase ends with a milestone review, which could be as simple as a short meeting, where you meet with prime stakeholders who will make a "go/no-go" decision regarding your project. They should consider whether the project still makes sense, perhaps the situation has changed, and that you're addressing the project risks appropriately. This is important for "agile in the small" but also for "agile in the large" because at scale your risks are often much greater. Your prime stakeholders should also verify that you have in fact met the criteria for exiting the phase. For example, if you don't have an end-to-end working skeleton of your system then you're not ready to enter the Construction phase. Holding these sorts of milestone reviews improves your IT governance efforts by giving senior management valuable visibility at the level that they actually need: when you have dozens or hundreds of projects underway, you can't attend all of the daily stand up meetings of each team, nor do you even want to read summary status reports.
These milestone reviews enable you to lower project risk. Last Autumn I ran a survey via Dr. Dobb's Journal (www.ddj.com) which explore how people actually define success for IT projects and how successful we really were. We found that when people define success in their own terms that Agile has a 71% success rate compared with 63% for traditional approaches. Although it's nice to that Agile appears to be lower risk than traditional approaches, a 71% success rate still implies a 29% failure rate. The point is that it behooves us to actively monitor development projects to determine if they're on track, and if not either help them to get back on track or cancel them as soon as we possibly can. Hence the importance of occasional milestone reviews where you make go/no-go decisions. If you're interested in the details behind the project, they can be found at http://www.ambysoft.com/surveys/success2007.html .
Done right, phases are critical to your project success, particularly at scale. Yes, the traditional community seems to have gone overboard with phase-based approaches, but that doesn't mean that we need to make the same mistakes. Let's keep the benefit without the cost of needless bureaucracy.[Read More]
ScottAmbler 120000HESD Tags:  agile-scaling-model agileexec agility-at-scale whitepaper asm agile 6,073 Visits
My new paper Scaling Agile: An Executive Guide is now available. As the title suggests the paper overviews how to scale agile strategies to meet your organization's unique needs.
The executive summary:
Agile software development is a highly collaborative, quality-focused approach to software and systems delivery, which emphasizes potentially shippable working solutions produced at regular intervals for review and course correction. Built upon the shoulders of iterative development techniques, and standing in stark contrast to traditional serial or sequential software engineering methods, agile software delivery techniques hold such promise that IBM has begun to adopt agile processes throughout its Software Group, an organization with over 25,000 developers. But how can practices originally designed for small teams (10-12) be “scaled up” for significantly larger operations? The answer is what IBM calls “agility@scale.”
There are two primary aspects of scaling agile techniques that you need to consider. First is scaling agile techniques at the project level to address the unique challenges individual project teams face. This is the focus of the Agile Scaling Model (ASM). Second is scaling your agile strategy across your entire IT department, as appropriate. It is fairly straightforward to apply agile on a handful of projects, but it can be very difficult to evolve your organizational culture and structure to fully adopt the agile way of working.
The Agile Scaling Model (ASM) defines a roadmap for effective adoption and tailoring of agile strategies to meet the unique challenges faced by a software and systems delivery team. Teams must first adopt a disciplined delivery lifecycle that scales mainstream agile construction techniques to address the full delivery process, from project initiation to deployment into production. Then teams must determine which agile scaling factors – team size, geographical distribution, regulatory compliance, domain complexity, organizational distribution, technical complexity, organizational complexity, or enterprise discipline, if any — are applicable to a project team and then tailor their adopted strategies accordingly to address their specific range of complexities.
When scaling agile strategies across your entire IT organization you must effectively address five strategic categories — the Five Ps of IT: People, principles, practices, process, and products (i.e., technology and tooling). Depending on your organizational environment the level of focus on each area will vary. What we are finding within many organizations, including IBM, is that the primary gating factor for scaling agile across your entire organization is your organization’s ability to absorb change.
Recently I visited a customer who had adopted Scrum. They were a few sprints, what Scrum calls iterations, into the project and were running into some difficulties. Although I was primarily brought in to educate senior management on disciplined agile software development, I was also asked to sit in on the team’s daily stand-up meeting so that I could hopefully provide some suggestions as to how to address the problems they were running into.
Their work area was fairly typical. They had some whiteboards which they were using for project planning and tracking, with sticky notes to indicate what work had been taken on by each team member. The current status of the task (not yet started, in progress, and completed) was indicated by putting each sticky note in a corresponding column for the status and corresponding column for the team member. This allowed everyone on the team to easily share their status and to see the status of everyone else. On the sides were sketches of the architecture as well as some business oriented models. In addition to Scrum the team had adopted several practices from Agile Modeling, in this case they had done some initial requirements envisioning and architecture envisioning, as well as practices from Extreme Programming (XP) for construction. In short, they had followed a fairly common strategy of combining practices from various agile methods.
This would have worked perfectly fine if they had tailored the practices to reflect the situation that they were in, but instead they adopted them "straight out of the book". First, the team was distributed, with most of the team in the location that I was visiting but some people located in two other distant cities. Therein was the source of most of their problems. The people at the other two locations weren’t getting much value out of the daily stand-up meetings, even though they would dial in, because they couldn’t see the project status information. Although people at this location were trying their best to represent these distant people in the daily stand-ups it wasn’t working well – their status information wasn’t being kept up to date and for some people it was a bit of mystery as to what they were actually working on at all.
This team also had 30 people in it, which isn’t a big deal although it can stretch the limits of the simple modeling and planning tools (in this case paper and whiteboards) that they were using. Because the team was larger they were investing a fair bit of time creating burn down charts at both the iteration/sprint and project levels. One of the unfortunate implications of using manual tools for project management is that any associated metric/status reporting in turn becomes manual as well. Considering how the agile community is so concerned with working efficiently, I find it comical that we have a tendency to overlook our own potentially unnecessary bureaucracy such as this.
The problem was that the team was applying strategies, in this case using sticky notes and whiteboards to capture the detailed iteration plan, applying similar strategies to capture key models, and were verbally relaying of status information between sub-teams. There are perfectly fine strategies for smaller co-located teams, but not so good for large or distributed teams. The solution was to recognize that they were in an Agility@Scale situation and needed to tailor their approach to reflect this fact. In this case they needed to forgo some of the manual tools and instead use electronic tooling such as Rational Team Concert (RTC) to share information across disparate locations, in particular the work assignment and corresponding status information. RTC also creates common agile reports such as burn-down charts based on the activities of the developers, providing accurate (nearly) real-time information while removing the burden of status reporting. The RTC project dashboard does more than just this, to see an actual example of one visit www.jazz.net to see the dashboard for the RTC development team itself. You can also see their actual work item list too, a more advanced version of Scrum’s product and sprint backlogs.[Read More]
ScottAmbler 120000HESD Tags:  requirements tdd design agileadopt specification agility-at-scale amdd testing 3 Comments 6,721 Visits
Test-driven development (TDD) is a common agile programming technique which has both specification and validation aspects. With TDD, you specify your software in detail on a just-in-time (JIT) basis via executable tests that are run in a regression manner to confirm that the system works to your current understanding of what your stakeholders require.
TDD is the combination of test-first development (TFD) and refactoring. With TFD, you write a single test (at either the requirements level with customer/acceptance tests or the design level with developer tests) and then you write just enough software to fulfill that test. Refactoring is a technique where you make a small change to your existing code to improve its design without changing its semantics.
TDD offers several benefits:1. It enables you to take small, safe steps during development, increasing programmer productivity.2. It increases quality. Agile developers are doing more testing, and doing it more often, than ever before. We're also fixing the problems that we find right on the spot.3. It helps to push validation activities early in the lifecycle, decreasing the average cost to fix defects (which rises exponentially the longer it takes you to detect them).4. Through single sourcing information, by treating tests as both specifications and as tests, we reduce the work required, increasing productivity.5. We leave behind valuable, up-to-date, detailed specifications for the people who come after us. Have you ever met a maintenance programmer who wouldn't want a full regression test suite for the code that they're working with?
But TDD isn't perfect. Although TDD is great at specifying code at a fine-grain level, tests simply don't scale to address higher level business process and architectural issues. Agile Model Driven Development (AMDD) enables you to scale TDD through initial envisioning of the requirements and architecture as well as just-in-time (JIT) modeling at the beginning and during construction iterations. To scale requirements-level TDD, you must recognize that customer tests are very good at specifying the details, but not so good at providing overall context. High-level business process models, conceptual domain models, and use cases are good at doing so, and these work products are often created as part of your initial requirements envisioning and iteration modeling activities. Similarly, to scale design-level TDD you must recognize that developer tests are very finely grained but once again do not provide overall context. High-level architecture sketches created during envisioning activities help set your initial technical direction. During each construction iteration, you'll do more detailed design modeling to think through critical issues before you implement them via TDD.
You also need to scale the validation aspects of TDD. TDD is in effect an approach to confirmatory testing where you validate the system to the level of your understanding of the requirements. The fundamental challenge with confirmatory testing, and hence TDD, is that it assumes that stakeholders actually know and can describe their requirements. Therefore you need to add investigative testing practices which explore issues that your stakeholders may not have thought of, such as usability issues, system integration issues, production performance issues, security issues, and a multitude of others.
For further reading, I suggest:1. My article "Introduction to TFD/TDD" at http://www.agiledata.org/essays/tdd.html which overviews TDD.2. My February 2008 column in Dr. Dobb's Journal entitled "Scaling TDD" at http://www.ddj.com/architect/205207998 which explores this issue in detail. 3. Andrew Glover's article "In pursuit of code quality: Adventures in behavior-driven development" at http://www.ibm.com/developerworks/java/library/j-cq09187/ which describes a new-and-improved take on TDD called BDD.[Read More]
ScottAmbler 120000HESD Tags:  agileadopt disciplined-agile-deliver... agility-at-scale agile solution 13,908 Visits
An imporant step in scaling your agile strategy is to adopt a Disciplined Agile Delivery (DAD) approach instead of one which is just focused on agile construction. One aspect of adopting a DAD approach it to mature your focus from just producing software to instead providing a solution which meets the needs of its stakeholders within the appropriate economic, cultural, and technical constraints. The fundamental observation is that as IT professionals we do far more than just develop software. Yes, this is clearly important, but in addressing the needs of our stakeholders we will often:
Although delivery of high-quality, working software is important it is even more important that we deliver high-quality working solutions to our stakeholders. Minimally IT professionals should have the skills and desire to produce good software, but what they really need are the skills and desire to provide good solutions. We need strong technical skills, but we also need strong "soft skills" such as user interface design and process design to name just two.
The shift to a solution-oriented focus from a software-oriented focus requires your agile teams to address some of the software-oriented prejudices which crept into the Agile Manifesto. The people who wrote the manifesto (which I fully endorse) were for the most part software developers, consultants, and in many cases both. It is little wonder that this group would allow a bias towards software development creep into the language of their manifesto.