Recently I visited a customer who had adopted Scrum. They were a few sprints, what Scrum calls iterations, into the project and were running into some difficulties. Although I was primarily brought in to educate senior management on disciplined agile software development, I was also asked to sit in on the team’s daily stand-up meeting so that I could hopefully provide some suggestions as to how to address the problems they were running into.
Their work area was fairly typical. They had some whiteboards which they were using for project planning and tracking, with sticky notes to indicate what work had been taken on by each team member. The current status of the task (not yet started, in progress, and completed) was indicated by putting each sticky note in a corresponding column for the status and corresponding column for the team member. This allowed everyone on the team to easily share their status and to see the status of everyone else. On the sides were sketches of the architecture as well as some business oriented models. In addition to Scrum the team had adopted several practices from Agile Modeling, in this case they had done some initial requirements envisioning and architecture envisioning, as well as practices from Extreme Programming (XP) for construction. In short, they had followed a fairly common strategy of combining practices from various agile methods.
This would have worked perfectly fine if they had tailored the practices to reflect the situation that they were in, but instead they adopted them "straight out of the book". First, the team was distributed, with most of the team in the location that I was visiting but some people located in two other distant cities. Therein was the source of most of their problems. The people at the other two locations weren’t getting much value out of the daily stand-up meetings, even though they would dial in, because they couldn’t see the project status information. Although people at this location were trying their best to represent these distant people in the daily stand-ups it wasn’t working well – their status information wasn’t being kept up to date and for some people it was a bit of mystery as to what they were actually working on at all.
This team also had 30 people in it, which isn’t a big deal although it can stretch the limits of the simple modeling and planning tools (in this case paper and whiteboards) that they were using. Because the team was larger they were investing a fair bit of time creating burn down charts at both the iteration/sprint and project levels. One of the unfortunate implications of using manual tools for project management is that any associated metric/status reporting in turn becomes manual as well. Considering how the agile community is so concerned with working efficiently, I find it comical that we have a tendency to overlook our own potentially unnecessary bureaucracy such as this.
The problem was that the team was applying strategies, in this case using sticky notes and whiteboards to capture the detailed iteration plan, applying similar strategies to capture key models, and were verbally relaying of status information between sub-teams. There are perfectly fine strategies for smaller co-located teams, but not so good for large or distributed teams. The solution was to recognize that they were in an Agility@Scale situation and needed to tailor their approach to reflect this fact. In this case they needed to forgo some of the manual tools and instead use electronic tooling such as Rational Team Concert (RTC) to share information across disparate locations, in particular the work assignment and corresponding status information. RTC also creates common agile reports such as burn-down charts based on the activities of the developers, providing accurate (nearly) real-time information while removing the burden of status reporting. The RTC project dashboard does more than just this, to see an actual example of one visit www.jazz.net to see the dashboard for the RTC development team itself. You can also see their actual work item list too, a more advanced version of Scrum’s product and sprint backlogs.[Read More]
Agility@Scale: Strategies for Scaling Agile Software Development
with Tags: agile X
In the early days of agile, the applications where agile development was applied were smaller in scope and relatively straightforward. Today, the picture has changed significantly and organizations want to apply agile development to a broader set of projects. Agile hence needs to adapt to deal with the many business, organization, and technical complexities today’s software development organizations are facing. This is what Agility@Scale is all about – explicitly addressing the complexities which disciplined agile delivery teams face in the real world.These agile scaling factors which we've found to be important are:
ScottAmbler 120000HESD Tags:  velocity governance acceleration agileexec agile metrics 2 Comments 7,561 Visits
I've been getting a lot of questions lately about applying the acceleration metric in practice. So, here's some answers to frequently asked questions:
1. How do I monetize acceleration? This is fairly straightforward to do. For example, assume your acceleration is 0.007 (0.7%), there are five people on the team, your annual burdened cost per person is $150,000, and you have two week iterations. All these numbers are made up, but you know how to calculate acceleration now and IT management had darn well better know the average burdened cost (salary plus overhead) of their staff. So, per iteration the average burdened cost per person must be $150,000/26 = $5,770. Productivity improvement per iteration for this team must be $5,770 * 5 * .007 = $202. If the acceleration stayed constant at 0.7% the overall productivity improvement for the year would be (1.007)^26 (assuming the team works all 52 weeks of the year) which would be 1.198 or 19.8%. This would be a savings of $148,500 (pretty much the equivalent of one new person). Of course a 20% productivity increase over an entire year is a really aggressive improvement, regardless of some of the claims made by the agile snake oil salesman out there, although at 10-15% increase is a reasonable expectation. What I'd really want to do is calculate the acceleration for the year by comparing the velocity from the beginning of the year to the end of the year (in Western cultures I'd want to avoid comparing iterations near to the holidays). So, if the team velocity the first week of February 2008 was 20 points, now the same team's velocity the first week of February 2009 was 23 points, that's an acceleration of (23-20)/20 = 15% over a one year period, for a savings of $112,500.
2. Is acceleration really unitless? For the sake of comparison it is. The "units" are % change in points per iteration, or % change in points per time period depending on the way that you want to look at it. Because it's a percentage I can easily monetize it, as you see above, and use it as a basis of comparison.
3. How do I convince teams to share their data? This can be difficult. Because acceleration is easy to calculate for agile teams, and because it's easy to use to compare teams (my team has .7% acceleration whereas other teams down the hall from mine have accelerations of .3% and -.2% of teams), people are concerned that this metric will be used against them. OK, to be fair, my team might be OK with this. ;-) Seriously though, this is a valid fear that will only be addressed by an effective governance program based on enablement, collaboration, and trust instead of the traditional command-and-control approach. Management's track record regarding how they've used measurements in the past, and how they've governed in general, have a great effect on people's willingness to trust them with new metrics such as acceleration. The implication is that you need to build up trust, something that could take years if it's possible at all.
4. Why does this work for agile teams? Agile teams are self organizing, and an implication of that is that they will be held accountable for their estimates. Because of this accountability, and because velocity is a vital input into their planning and estimation efforts, agile teams are motivated to calculate their velocity accurately and to track it over time. Because they're eager to get their velocity right, and because acceleration is based on velocity, there's an exceptionally good chance that it's accurate.
5. What about function points or similar productivity measures? Function points can be calculated for projects being developed via an agile approach, or other approaches for that matter, but it's a very expensive endeavor compared to calculating acceleration (which is essentially free) and likely will be seen as a bureaucratic overhead by the development team. My rule of thumb is that if you're not being explicitly paid to count function points (for example the US DoD will often pay contracting companies to create estimates based on function point counts) then I wouldn't bother with them.
6. What about calculating acceleration for iterative project teams? Iterative project teams, perhaps following Rational Unified Process (RUP), can choose to calculate and track their velocity and thereby their acceleration. The key is to allow the team to be self organizing and accountable for their estimates, which in turn motivates them to get their velocity right just like agile teams (RUP can be as agile as you want to make it, don't let anyone tell you differently).
7. What about calculating acceleration for traditional project teams? In theory this should work, in practice it is incredibly unlikely. Traditional teams don't work in iterations where working software is produced on a regular basis, they're typically not self organizing, and therefore there really isn't any motivate to calculate velocity (even if they do, there is little motivation to get it right). Without knowing the velocity you can't calculate acceleration. If you can't trust the velocity estimate, and I certainly wouldn't trust a traditional team's velocity estimate, then you can't trust your acceleration calculation. So, my fall back position to calculate productivity improvement would be to do something like function point counting (which is expensive and difficult to compare between teams due to different fudge factors used by different FP counters) and then looking at change in FPs delivered over time.
8. How can I apply this across a department? It is fairly straightforward to roll up the acceleration of project teams into an overall acceleration measure for a portfolio of teams simply by taking a weighted average based on team size. However, this is only applicable to teams that are in a position to report an accurate acceleration (the agile and iterative teams) and of course are willing to do so.
9. What does a negative acceleration tell me? If the acceleration is negative then productivity on the team is going down, likely an indicator of quality and/or team work problems. However, you don't want to manage by the numbers so you should talk to the team to see what's actually going on.
10. What does a zero acceleration tell me? This is an indication that the team's productivity is not increasing, and that perhaps they should consider doing retrospectives at the end of each iteration and then acting on the results from those retrospectives. Better yet they can "dial up" their process improvement efforts by adopting something along the lines of IBM Rational Self Check.
I'm happy to announce Rational's Agility at Scale poster which is currently available free of charge from the Rational poster order page.
Although I'm obviously biased as I was involved with its creation, the poster includes some really good information about how to scale agile software development practices effectively. It summarizes the scaling factors, such as large teams, distribution, regulatory compliance, application complexity, and so on that you should be concerned with. It also presents a full agile software development lifecycle that goes beyond the construction focused lifecycles of common "agile in the small" processes. It also summarizes the practices of lean development governance, giving you some insight into how to govern your IT environment more effectively.
I think it's a pretty good poster that's worth checking out. It's free, so it's hard to argue with the price. Most importantly, it would look pretty good hanging on your office wall.
ScottAmbler 120000HESD Tags:  disciplined-agile-deliver... agileexec agile agility-at-scale risk rup phases governance 6 Comments 8,294 Visits
The explicit phases of the Unified Process -- Inception, Elaboration, Construction, and Transition -- and their milestones are important strategies for scaling agile software development to meet the real-world needs of modern organizations. Yes, I realize that this is heresy for hard-core agilists who can expound upon the evils of serial development, yet these very same people also take a phased approach to development although are loathe to admit it. The issue is that the UP phases are like seasons of a project: although you'll do the same types of activities all throughout a project, the extent to which you do them and the way in which you do them change depending on your goals. For example, at the beginning of a development project if you want to be effective you need to do basic things like identify the scope of the project, identify a viable architecture strategy, start putting together your team, and obtain support for the project. Towards the end of a project your focus is on the activities surrounding the deployment of your system into production, including end-of-lifecycle testing efforts, training, cleaning up of documentation, piloting the system with a subset of users, and so on. In between you focus on building the system, including analysis, design, testing, and coding of it. Your project clearly progresses through different phases, or call them seasons if the term phase doesn't suit you, whether your team is agile or not.
The UP defines four phases, each of which address a different kind of risk:1. Inception. This phase focuses on addressing business risk by having you drive to scope concurrence amongst your stakeholders. Most projects have a wide range of stakeholdres, and if they don't agree to the scope of the project and recognize that others have conflicting or higher priority needs you project risks getting mired in political infighting. In the Eclipse Way this is called the "Warm Up" iteration and in other agile processes "Iteration 0".2. Elaboration. The goal of this phase is to address technical risk by proving the architecture through code. You do this by building and end-to-end skeleton of your system which implements the highest-risk requirements. Some people will say that this approach isn't agile, that your stakeholders should by the only ones to prioritize requirements. Yes, I agree with that, but I also recognize that there are a wide range of stakeholders, including operations people and enterprise architects who are interested in the technical viability of your approach. I've also noticed that the high-risk requirements are often the high-business-value ones anyway, so you usually need to do very little reorganization of your requirements stack.3. Construction. This phase focuses on implementation risk, addressing it through the creation of working software each iteration. This phase is where you put the flesh onto the skeleton.4. Transition. The goal of this phase is to address deployment risk. There is usually a lot more to deploying software than simply copying a few files onto a server, as I indicated above. Deployment is often a complex and difficult task, one which you often need good guidance to succeed at.
Each phase ends with a milestone review, which could be as simple as a short meeting, where you meet with prime stakeholders who will make a "go/no-go" decision regarding your project. They should consider whether the project still makes sense, perhaps the situation has changed, and that you're addressing the project risks appropriately. This is important for "agile in the small" but also for "agile in the large" because at scale your risks are often much greater. Your prime stakeholders should also verify that you have in fact met the criteria for exiting the phase. For example, if you don't have an end-to-end working skeleton of your system then you're not ready to enter the Construction phase. Holding these sorts of milestone reviews improves your IT governance efforts by giving senior management valuable visibility at the level that they actually need: when you have dozens or hundreds of projects underway, you can't attend all of the daily stand up meetings of each team, nor do you even want to read summary status reports.
These milestone reviews enable you to lower project risk. Last Autumn I ran a survey via Dr. Dobb's Journal (www.ddj.com) which explore how people actually define success for IT projects and how successful we really were. We found that when people define success in their own terms that Agile has a 71% success rate compared with 63% for traditional approaches. Although it's nice to that Agile appears to be lower risk than traditional approaches, a 71% success rate still implies a 29% failure rate. The point is that it behooves us to actively monitor development projects to determine if they're on track, and if not either help them to get back on track or cancel them as soon as we possibly can. Hence the importance of occasional milestone reviews where you make go/no-go decisions. If you're interested in the details behind the project, they can be found at http://www.ambysoft.com/surveys/success2007.html .
Done right, phases are critical to your project success, particularly at scale. Yes, the traditional community seems to have gone overboard with phase-based approaches, but that doesn't mean that we need to make the same mistakes. Let's keep the benefit without the cost of needless bureaucracy.[Read More]
ScottAmbler 120000HESD Tags:  agility-at-scale outside-in-development xp modeling scrum disciplined-agile-deliver... agileadopt amdd analysis agile 3 Comments 6,878 Visits
The popular Agile literature can often seam naive when it comes to how Agilists work with project stakeholders:- Extreme Programming (XP) has a practice called On-Site Customer where one or more people work closely with your team to provide information and to make decisions in a timely manner.- Scrum has the role of Product Owner who is the one single person that the development team goes to for decisions about requirements. - Agile Modeling (AM) has the practice of Active Stakeholder Participation which extends On-Site Customer to get the stakeholder(s) actively involved with the modeling effort through the use of inclusive tools and techniques.
These are great strategies for small, co-located teams doing straightforward development, but they quickly fall apart at scale. This occurs for several reasons:1. Stakeholders are a diverse group. Your stakeholders include end users, business management, project funders, enterprise architects, operations staff, support staff, other system development teams, and many others. Different people have different, and often contradictory, requirements and they certainly have different priorities. It's questionable whether a single person, or a handful of persons, can adequately represent this diverse group.2. One person becomes a bottleneck. Even with a small co-located team this is a problem, let alone one that is geographically distributed or one that is very large. There's no way that a single person can be available 24/7 in a responsive manner to support distributed teams.3. It's a difficult role. The Product Owner/Customer (POC) is responsible for representing the business to the development team. They're making important decisions on a regular basis, decisions which they'll be held accountable for.4. One person becomes a serious project risk. Not only is it questionable whether a single person can fairly represent all stakeholders, even if they could what happens if you lose that person? They effectively become a single point of failure for your team.
To scale this role, consider the following strategies:1. Recognize the true scope of the POC role. Not only are they stakeholder proxies they also are a development team representative to the stakeholder community as a whole. As stakeholder proxies they'll make decisions and prioritize the work, they'll run requirements elicitation sessions, they'll negotiate priorities, and they'll put the development team in contact with stakeholders who have expertise in specific aspects of the domain. As team representatives they'll often demo the current version of the system to other stakeholders, communicate the status of the project to people, and respond to various requests for information from the stakeholders.2. Have multiple people in it. A single POC works well for small, co-located teams developing simple software. At scale you'll soon discover that you need multiple people in this role so that they don't become a bottleneck. For distributed teams it's common to see each subteam have one or more POCs who are managed by a primary/chief POC. The primary POC typically works on the coordinating team with the chief architect (I'll talk about this role in a future blog posting) and the program manager (also a topic for a future blog posting).3. Train them in business analysis skills. The person(s) in the POC role need good business analysis skills. If fact, it's common for people who were formerly BAs for traditional teams to step into the POC role, particularly with BAs who originally come from the business side of your organization. This strategy has its advantages and disadvantages. As a BA they've likely got solid business knowledge but their instincts may motivate them to take a documentation-driven approach to providing information to the development team instead of a collaboration-based approach. Be careful.4. Consider the full system development lifecycle. There's far more to the POC role than supporting the development team during Construction iterations. During "Iteration 0", the Inception phase for an Agile RUP project or the warm-up phase for an Eclipse Way project, the POC(s) will often lead the initial requirements envisioning efforts. The product backlog, or better yet your work item list, needs to come from somewhere after all. During the release iteration(s), the Transition phase for RUP or the End-Game phase for Eclipse Way, the POC(s) will focus on communicating the upcoming release to the stakeholder community, will be actively involved with any final user acceptance testing (UAT), and may even be involved with training end users.
In my January 2008 column in Dr Dobb's Journal, posted at http://www.ddj.com/architect/204801134 , I provide detailed advice about how to scale the way that you work with stakeholders on Agile projects by applying the practices of Agile Model Driven Development (AMDD). There's no magic solution, you just need to choose to organize yourself effectively. The good news is that you can easily work with stakeholders at scale.[Read More]
It's customary to start a blog by describing the vision for it. Although this vision will undoubtedly evolve over time, it's always good to put a stake in the ground to get things started. Agile software development is clearly taking off and in my opinion is becoming the dominant development paradigm. Furthermore it appears that Agile approaches enjoy a higher success rate, providing better value for your IT investment, than do traditional approaches. Although organizations are succeeding at simpler projects with agile, many are struggling when applying Agile in more complex situations. They're finding that the "Agile rhetoric" doesn't always live up to its promises once you move into these complex situations. My goal with this blog is to share strategies for applying Agile techniques at scale.
When applying Agile strategies at scale you are likely to run into one or more of the following complexity factors:1. Geographical distribution. Is your team, including stakeholders, in different locations? Even being in different cubicles within the same building can erect barriers to communication, let alone being in different cities or even on different continents.2. Regulatory compliance. Regulations, including the Sarbanes-Oxley act, BASEL-II, and FDA statutes, to name a few, can increase the documentation and process burden on your projects. Complying to these regulations while still remaining as agile as possible can be a challenge.3. Entrenched policies, people, and processes. Most agile teams need to work within the scope of a larger organization, and that larger organization isn't always perfectly agile. Hopefully that will change in time, but we still need to get the job done right now. Your existing culture and organization can really hinder your ability to scale agile approaches, then a few "simple" changes can really help your efforts.4. Legacy systems. Although the politically correct term would be "proven assets" the reality is that it can be very difficult to leverage existing code and data sources due to quality problems. The code may not be well written, documented, or even have tests in place, yet that doesn't mean that your agile team should rewrite everything from scratch. Some legacy data sources are questionable at best, or the owners of those data sources difficult to work with, yet that doesn't given an agile team license to create yet another database.5. Organizational distribution. When your teams are made up of people working for different divisions, or if you have people from different companies (such as contractors, partners, or consultants), then your management complexity rises.6. Degree of governance. If you have one or more IT projects then you have an IT governance process in place. How formal it is, how explicit it is, and how effective it is will be up to you. IBM has been doing a lot of work in this topic over the past few years, and just recently Per Kroll and I have done some work around Lean Governance strategies. 7. Team size. Large teams will be organized differently than small teams, and they'll work differently too.8. System complexity. The more complex the system the greater the need for a viable architectural strategy. An interesting feature of the Rational Unified Process (RUP) is that it's Elaboration phase's primary goal is to prove the architecture via the creation of an end-to-end, working skeleton of the system. This risk-reduction technique is clearly a concept which Extreme Programming (XP) and Scrum teams can clearly benefit from.
It is definitely possible to scale Agile software development to meet the real-world complexities faced by modern organizations. Based on my experiences, I believe that over the next few years we'll discover that Agile scales better than traditional approaches. Many people have already discovered this, but as an industry I believe that there isn't yet sufficient evidence to state this as more than opinion. My goal with this blog is to provide advice for scaling Agile so as to increase your chances of success.
So, it looks like I have my work cut out for me. My strategy will be to address common questions which I get when working with customers and with internal IBM development teams. I have the privilege to work with a variety of software development teams worldwide, helping them to become more agile. They're all struggling with the same basic issues although don't recognize it because they're too focused on their own situation. So hopefully I'll be able to spread the word about what's actually working in practice.
I hope that you stay tuned.
- Scott[Read More]