AIXpert Blog is about the AIX operating system from IBM running on POWER based machines called Power Systems and software related to it like IBM Systems Director, PowerVM for virtualisation and PowerSC for security plus performance monitoring and nmon
AIX Workload Partitions (WPAR) are now certified by Oracle for Oracle 10gr2 Oracle announces Oracle 10gR2 support for Workload Partitions IBM TechDocs Flash: AIX WPAR (Workload Partition) available for Oracle Database
If you are looking for an update on AIX on the IBM BladeCenter blades or looking for the details of the latest POWER7 based blades, there is only one place you need to remember. I am adding this to this blog because I couldn't find it and you might have the same problem :-) Its here - Power Blades Wiki Look in the Presentation list for the latest POWER7 blades PS700, PS701 and PS702 and AIX levels its supports presentation. This is by the world wide "top gun" of Power Blades Trina Bunting. Lots on informative pictures, the extra card... [More]
The official rPerf rating (relative performance rating of Power based machines) are available in the pSeries, System p and now Power Systems "Facts and Features" documents that are on the IBM website. It is best to use Google for them (searching for "pseries Facts and Features" works for me). You may want to know the rPerf rating for your LPAR and an LPAR that is not one of the officially rated numbers of CPUs/Cores. There may be ratings for 8 and 16 CPUs but your LPAR has 13 CPUs! Well, you can run the rperf script on the... [More]
OK, this is "blowing my own trumpet" a little but I just finished a 12 minute movie on the best bits of Systems Director. Best in the sense that they "save me a lot of time" and you might like to take a look to see if they can help you too. As I run lots of POWER based machines and lots of copies of AIX, this is why it is very relevant to this AIXpert Blog. The 8 areas are: One Hour Install, Update Manager - HMC, Firmware & AIX in four mouse clicks, Whole
Machine Performance View, LPAR direct to HMC, Active Energy... [More]
I ran this session at the Las Vegas Technical University last week twice. I spend 5 minutes on each of the ten covering the basic concept and the "pro's and con's" then get the audience to vote on their top four. The smaller room took 105 people and the second time in a larger room to 187. It was a BIG conference with 1500+ people attending - its good and encouraging to see so many people interested in Power Systems. The results are fascinating a few top technologies are clear favourites but then the IBMer and customer views are... [More]
The new November Update is available from the download site from the regular website: http://www.ibm.com/systems/software/director/downloads/index.html When you have 6.2 or 188.8.131.52 installed get Systems Director to update itself - then update the plug-ins via the download site. There is lots of new features and quality improvements too. I will summarise these in a different blog entry. One quick note: if you are doing a fresh install - install DB2 as the database.
If you are migrating work from an older POWER5 or POWER6 machine/LPAR to POWER7 ... don't forget to check that those Java versions are compatible with POWER7 or you may hit "unexpected Java errors" The approved Java SDK on POWER7 are limited to particular versions with specific fixes . They can be found here: http://www.ibm.com/developerworks/java/jdk/power7/index.html Harder to check are the Java versions which are embedded in applications. Here are two important ones for IBM software: There is a technical bulletin regarding... [More]
We all know that a VIOS level is only fully supported for 2 years ... right! If you have problems with an older VIOS, you may be asked to upgrade to a supported level before a fix can be issued. Most teams run a dual VIOS configuration to allow painless and live upgrades for just this reason. The other reason is to survive a VIOS crash but I have never had a VIOS failure but that would be because I don't go fiddling with them nor adding unsupported software. I quickly upgraded my POWER7 VIOS from 2.1 to the latest VIOS level and made a... [More]
Finally, I found the time to try this new exciting feature and it was really simple to create and operate. I captured movie footage of my first attempt and it all worked (once I removed my spelling mistakes in commands). It only took two commands. So the technology has advanced concepts but it really easy to use, COOL! Some of the commands come with long option names like "-custername". A quick misquote from Star-Trek, never goes wrong: "It is UNIX Jim, but not as we know it!" One command to create my cluster,... [More]
N-Port Id Virtualisation (NPIV) and virtual Fibre Channel adapters - like high speed physical adapters (see an earlier blog) do require memory to operator at full speed. NPIV effectively turns the Virtual I/O Server (VIOS) into a kind of virtual SAN switch where packets are passed through with no changes from the physical adapter to the client Virtual Machine (LPAR). I found it very hard to find a recommendation in the documentation but was given a rule of thumb. As before it should be noted that starving the VIOS and the Hypervisor of... [More]
I have just released a second VIOS Shares Storage Pools movie that you may like to go and watch. We now have two movies covering first an Introduction (the new movie) and then second movie covering a hands-on look at setting it up and running it. There are also the example commands and the Info and download links. I am really liking the Shared Storage Pools simple operation, disk space saving and flexibility. I currently have just a tiny 40GB pool out of which I am running 6 Client Virtual Machine which each think that have 16 GBs. That is 96... [More]
This is an odd blog - it is about the withdrawal of POWER6 - which was announced in stealth mode! It has come as a shock to some customers. Given POWER7 comes with vast improvements in price performance you might say: Who cares and who would be buying POWER6 anyway? Well some customers with long term roll-out plans, need consistent equipment for reduced complexity and reduced testing and so still want POWER6 and could get caught out. So if you care, here is my list of withdrawal dates after which you can't buy new machines (nor POWER5 to... [More]
I am preparing sessions for a POWER/AIX Technical Conference in Norway - unfortunately the only place they could book for the event was a Ski Resort up in the mountains and there is still good snow. It is a tough gig but someone has to do it :-) As part of that conference, I am updating them on Systems Director and demonstrating it. I had a slide with these hints and tips. A slide with zero percent marks for style (far to many words and just a long list) and I thought ... I should share these with everyone, so here they are. Most of these are... [More]
There were a number of announcements made today by Power
Systems including new hardware features, a new platform management console, and
new PowerVM virtualization capabilities.
Two new Power Systems blade servers were announced, the PS703 and PS704 . The PS703 blade supports up to 16 processor cores in a single
BladeCenter slot and the PS704 supports up to 32 cores in a double-wide
blade. The PS703 and PS704 also support
a new solid state drive option.
The Power 750 Express server has new processor options or 4, 6 or 8
Hi, I am just back from the Prague Technical University last week. Everything worked well at the conference at the Hilton and the sessions were excellent - even the ones that I ran :-) but I keep making one mistake ... I volunteer to give an extra session or two. I ran the following sessions: Systems Director Lecture for AIX/POWER Users This covers the basics for a techie that needs to get it running including the architecture/components, pre-requisites, Advanced plug-in selection, The Systems Director Editions for reduced cost, compared... [More]