Well, it's Tuesday again, but this time, today we had our third big storage launch of 2009! A lot got announced today as part of IBM's big "Dynamic Infrastructure" marketing campaign. I will just focus on the
disk-related announcements today:
- IBM System Storage DS8700
IBM adds a new model to its DS8000 series with the
[IBM System Storage DS8700]. Earlier this month, fellow blogger and arch-nemesis Barry Burke from EMC posted [R.I.P DS8300] on this mistaken assumption that the new DS8700 meant that DS8300 was going away, or that anyone who bought a DS8300 recently would be out of luck. Obviously, I could not respond until today's announcement, as the last thing I want to do is lose my job disclosing confidential information. BarryB is wrong on both counts:
- IBM will continue to sell the DS8100 and DS8300, in addition to the new DS8700.
- Clients can upgrade their existing DS8100 or DS8300 systems to DS8700.
BarryB's latest post [What's In a Name - DS8700] is fair game, given all the fun and ridicule everyone had at his expense over EMC's "V-Max" name.
So the DS8700 is new hardware with only 4 percent new software. On the hardware side, it uses faster POWER6 processors instead of POWER5+, has faster PCI-e buses instead of the RIO-G loops, and faster four-port device adapters (DAs) for added bandwidth between cache and drives. The DS8700 can be ordered as a single-frame dual 2-way that supports up to 128 drives and 128GB of cache, or as a dual 4-way, consisting of one primary frame, and up to four expansion frames, with up to 384GB of cache and 1024 drives.
Not mentioned explicitly in the announcements were the things the DS8700 does not support:
- ESCON attachment - Now that FICON is well-established for the mainframe market, there is no need to support the slower, bulkier ESCON options. This greatly reduced testing effort. The 2-way DS8700 can support up to 16 four-port FICON/FCP host adapters, and the 4-way can support up to 32 host adapters, for a maximum of 128 ports. The FICON/FCP host adapter ports can auto-negotiate between 4Gbps, 2Gbps and 1Gbps as needed.
- LPAR mode - When IBM and HDS introduced LPAR mode back in 2004, it sounded like a great idea the engineers came up with. Most other major vendors followed our lead to offer similar "partitioning". However, it turned out to be what we call in the storage biz a "selling apple" not a "buying apple". In other words, something the salesman can offer as a differentiating feature, but that few clients actually use. It turned out that supporting both LPAR and non-LPAR modes merely doubled the testing effort, so IBM got rid of it for the DS8700.
Update: I have been reminded that both IBM and HDS delivered LPAR mode within a month of each other back in 2004, so it was wrong for me to imply that HDS followed IBM's lead when obviously development happened in both companies for the most part concurrently prior to that. EMC was late to the "partition" party, but who's keeping track?
Initial performance tests show up to 50 percent improvement for random workloads, and up to 150 percent improvement for sequential workloads, and up to 60 percent improvement in background data movement for FlashCopy functions. The results varied slightly between Fixed Block (FB) LUNs and Count-Key-Data (CKD) volumes, and I hope to see some SPC-1 and SPC-2 benchmark numbers published soon.
The DS8700 is compatible for Metro Mirror, Global Mirror, and Metro/Global Mirror with the rest of the DS8000 series, as well as the ESS model 750, ESS model 800 and DS6000 series.
- New 600GB FC and FDE drives
IBM now offers [600GB drives] for the DS4700 and DS5020 disk systems, as well as the EXP520 and EXP810 expansion drawers. In each case, we are able to pack up to 16 drives into a 3U enclosure.
Personally, I think the DS5020 should have been given a DS4xxx designation, as it resembles the DS4700
more than the other models of the DS5000 series. Back in 2006-2007, I was the marketing strategist for IBM System Storage product line, and part of my job involved all of the meetings to name or rename products. Mostly I gave reasons why products should NOT be renamed, and why it was important to name the products correctly at the beginning.
- IBM System Storage SAN Volume Controller hardware and software
Fellow IBM master inventory Barry Whyte has been covering the latest on the [SVC 2145-CF8 hardware]. IBM put out a press release last week on this, and today is the formal announcement with prices and details. Barry's latest post
[SVC CF8 hardware and SSD in depth] covers just part of the entire
The other part of the announcement was the [SVC 5.1 software] which can be loaded
on earlier SVC models 8F2, 8F4, and 8G4 to gain better performance and functionality.
To avoid confusion on what is hardware machine type/model (2145-CF8 or 2145-8A4) and what is software program (5639-VC5 or 5639-VW2), IBM has introduced two new [Solution Offering Identifiers]:
- 5465-028 Standard SAN Volume Controller
- 5465-029 Entry Edition SAN Volume Controller
The latter is designed for smaller deployments, supports only a single SVC node-pair managing up to
150 disk drives, available in Raven Black or Flamingo Pink.
- EXN3000 and EXP5060 Expansion Drawers
IBM offers the [EXN3000 for the IBM N series]. These expansion drawers can pack 24 drives in a 4U enclosure. The drives can either be all-SAS, or all-SATA, supporting 300GB, 450GB, 500GB and 1TB size capacity drives.
The [EXP5060 for the IBM DS5000 series] is a high-density expansion drawer that can pack up to 60 drives into a 4U enclosure. A DS5100 or DS5300
can handle up to eight of these expansion drawers, for a total of 480 drives.
- IBM System Storage Productivity Center v1.4
The latest [System Storage Productivity Center (SSPC) v1.4] can manage all of your DS3000, DS4000, DS5000, DS6000, DS8000 series disk, and SAN Volume Controller. You can get the SSPC built in two modes:
- Pre-installed with Tivoli Storage Productivity Center Basic Edition. Basic Edition can be upgraded with license keys to support Data, Disk and Standard Edition to extend support and functionality to report and manage XIV, N series, and non-IBM disk systems.
- Pre-installed with Tivoli Key Lifecycle Manager (TKLM). This can be used to manage the Full Disk Encryption (FDE) encryption-capable disk drives in the DS8000 and DS5000, as well as LTO and TS1100 series tape drives.
- IBM Tivoli Storage FlashCopy Manager v2.1
The [IBM Tivoli Storage FlashCopy Manager V2.1] replaces two products in one. IBM used
to offer IBM Tivoli Storage Manager for Copy Services (TSM for CS) that protected Windows application data, and IBM Tivoli Storage Manager for Advanced Copy Services (TSM for ACS) that protected AIX application data.
The new product has some excellent advantages. FlashCopy Manager offers application-aware backup of LUNs containing SAP, Oracle, DB2, SQL server and Microsoft Exchange data. It can support IBM DS8000, SVC and XIV point-in-time copy functions, as well as the Volume Shadow Copy Services (VSS) interfaces of the IBM DS5000, DS4000 and DS3000 series disk systems. It is priced by the amount of TB you copy, not on the speed or number of CPU processors inside the server.
Don't let the name fool you. IBM FlashCopy Manager does not require that you use Tivoli Storage Manager (TSM) as your backup product. You can run IBM FlashCopy Manager on its own, and it will manage your FlashCopy target versions on disk, and these can be backed up to tape or another disk using any backup product. However, if you are lucky enough to also be using TSM, then there is optional integration that allows TSM to manage the target copies, move them to tape, inventory them in its DB2 database, and provide complete reporting.
Yup, that's a lot to announce in one day. And this was just the disk-related portion of the launch!
technorati tags: ds8000, disk, ds8700, exn3, svc, cf8, 2145-c58, DS5000, DS4000, DS3000, DS5020, DS4700, DS5100, DS5300, SSPC, TKLM, FlashCopy+Manager, Tivoli, Storage+Manager, TSM, DB2, Oracle, SAP, SQL, Microsoft+Exchange, VSS, Windows, AIX, N+series, XIV
Well, it's Tuesday again, and we have more IBM announcements.
- XIV asynchronous mirror
For those not using XIV behind SAN Volume Controller, [XIV now offers native asynchronous mirroring] support to another XIV far, far away. Unlike other disk systems that are limited to two or three sites, an XIV can mirror to up to 15 other sites. The mirroring can be at the individual volume, or a consistency group of multiple volumes. Each mirror pair can have its own recovery point objective (RPO). For example, a consistency group of mission critical application data might be given an RPO of 30 seconds, but less important data might be given an RPO of 20 minutes. This allows the XIV to prioritize packets it sends across the network.
As with XIV synchronous mirror, this new asynchronous mirror feature can send the data over either its
Fibre Channel ports (via FCIP) or its Ethernet ports.
- Networking Gear
The IBM System Storage SAN384B and SAN768B directors now offer [two new blades!]
- A 24-port FCoCEE blade where each port can handle 10Gb convergence enhanced Ethernet (CEE). CEE can be used to transmit Fibre Channel, TCP/IP, iSCSI and other Ethernet protocols. This connect directly to server's converged network adapter (CNA) cards.
- A 24-port mixed blade, with 12 FC ports (1Gbps, 2Ggbs, 4Gbps, 8Gbps), 10 Ethernet ports (1GbE) and 2 Ethernet ports (10GbE). This would connect to traditional server NIC, TOE and HBA cards as well as traditional NAS, iSCSI and FC based storage devices.
IBM also announced the IBM System Storage [SAN06B-R Fibre Channel router]. This has 16 FC ports (1Gbps up to 8Gbps) and six Ethernet ports (1GbE), with support for both FC routing as well as FCIP extended distance support.
With the holiday season coming up at the end of the year, now is a great time to ask Santa for a new shiny pair of XIV systems, and some extra networking gear to connect them.
technorati tags: IBM, XIV, asynchronous+mirror, FCoE, FCoCEE, CEE, iSCSI, SAN384B, SAN768B, SAN06B-R
Continuing my coverage of the Data Center Conference, held Dec 1-4 in Las Vegas, an analyst presented the challenges of managing the rapid growth in storage capacity. Administrators ability to manage storage is not keeping up with the growth. His recommendations:
- Aim to just meet but not exceed service level agreements (SLAs)
- Revisit past IT decisions. This includes evaluating your SAN to NAS ratio.
- Embrace new technologies when they are effective, this includes cloud storage, solid state drives, and interconnect technologies like FCoCEE.
- Follow vendor management best practices, update your vendor "short list".
A survey of the audience found:
- 20 percent have a single external storage vendor
- 39 percent have two external storage vendors
- 18 percent have three external storage vendors
- 23 percent have four or more external storage vendors
Throughout the industry, storage vendors are following IBM's example of using commodity hardware parts. This is because custom ASICs are expensive, and changes take a minimum of three months development time. Software-based implementations can be updated more quickly.
In terms of technologies deployed of SAN, NAS, Compliance Archive (such as the IBM Information Archive), and Virtual Tape Library (VTL) such as the IBM TS7650 ProtecTIER data deduplications solution, here was the survey of the audience:
- 8 percent: SAN only
- 14 percent: SAN and NAS
- 23 percent: SAN, NAS and Compliance Archive
- 9 percent: SAN and VTL
- 14 percent: SAN, NAS and VTL
- 32 percent: SAN, NAS, Compliance Archive and VTL
Cost reduction techniques including thin provisioning, compression, data deduplication, Quality of Service tiers, and archiving. To reduce power and cooling requirements, switch from FC to SATA disk wherever possible, and move storage out of the data center, such as on tape cartridges or cloud storage.
For emerging technologies, the following survey:
- 16 percent have already implemented a new emerging technology (IBM XIV, Pillar, 3PAR, etc.)
- 30 percent plan to do so in 12-24 months
- 4 percent plan to do so in 24-48 months
- 50 percent have no plans, and will continue to stick with traditional storage technologies
As for adopting Cloud storage, here was the survey:
- 14 percent already have
- 31 percent plan to use Cloud storage in 12-24 months
- 13 percent plan to use Cloud storage in 24-48 months
- 42 percent have no plans to adopt Cloud storage
My take-away from this is that many companies are still "exploring" into different options available to them. Fortunately, IBM offers a broad portfolio of complete end-to-end solutions to make acquiring the right mix of technologies that are optimized for your workloads possible.
technorati tags: , XIV, Cloud Storage, SAN, NAS, VTL, ProtecTIER, Information Archive
Continuing my drawn out coverage of IBM's big storage launch of February 9, today I'll cover the IBM System Storage TS7680 ProtecTIER data deduplication gateway for System z.
On the host side, TS7680 connects to mainframe systems running z/OS or z/VM over FICON attachment, emulating an automated tape library with 3592-J1A devices. The TS7680 includes two controllers that emulate the 3592 C06 model, with 4 FICON ports each. Each controller emulates up to 128 virtual 3592 tape drives, for a total of 256 virtual drives per TS7680 system. The mainframe sees up to 1 million virtual tape cartridges, up to 100GB raw capacity each, before compression. For z/OS, the automated library has full SMS Tape and Integrated Library Management capability that you would expect.
Inside, the two control units are both connected to a redundant pair cluster of ProtecTIER engines running the HyperFactor deduplication algorithm that is able to process the deduplication inline, as data is ingested, rather than post-process that other deduplication solutions use. These engines are similar to the TS7650 gateway machines for distributed systems.
On the back end, these ProtecTIER deduplication engines are then connected to external disk, up to 1PB. If you get 25x data deduplication ratio on your data, that would be 25PB of mainframe data stored on only 1PB of physical disk. The disk can be any disk supported by ProtecTIER over FCP protocol, not just the IBM System Storage DS8000, but also the IBM DS4000, DS5000 or IBM XIV storage system, various models of EMC and HDS, and of course the IBM SAN Volume Controller (SVC) with all of its supported disk systems.
Here is the [Announcement Letter
technorati tags: ts7680, z/OS, z/VM, FICON, 3592-J1A, SMS Tape, TS7650, ProtecTIER, mainframe, FCP, DS8000, DS5000, DS4000, XIV, SVC
Well, it's Tuesday again, and that means IBM announcements! Right on the heels of our big storage launch on February 9, today IBM announced some exciting options for its modular disk systems. Let's take a look:
- 2TB SATA-II drives
That's right, you can now DOUBLE your capacity with 2TB SATA type-II drives on the DS3950, DS4200, DS4700, DS5020, DS5100 and DS5300 disk controllers, as well as the DS4000 EXP420, EXP520, EXP810, EXP5000 and EXP5060 expansion drawers. Here are the Announcement Letters for the [HVEC] and [AAS] ordering systems.
- 300GB Solid State Drives
IBM also announces 300GB solid state drives (SSD) for the DS5100 and DS5300. These are four times larger than the 73GB drives IBM offered last year, for those workloads that need high read IOPS such as Online Transaction Processing (OLTP) and Enterprise Resource Planning (ERP) applications. Here is the [Announcement Letter].
- New N series model N3400
For customers that need less than the minimum 21TB that our IBM Scale-Out Network Attach Storage (SONAS) can provide, IBM offers the new N3400 unified storage disk system, with support for NFS, CIFS, iSCSI and FCP. This is a 2U high 12 drive model that can be expanded up to 136 drives, basically doubling all the stats from last year's N3300 model. Fellow blogger, Rich Swain (IBM), does a great job recapping the speeds and feeds over on his blog [News and Information about IBM N series].
It also appears that the reports and rumors of the death of the DS6800 are premature. Don't believe misleading statements from competitors, such as those found written by fellow blogger BarryB (EMC), aka "the Storage Anarchist", in his latest post [Bring Out Your Dead] showing a cute little tombstone with "Feb 2010" on the bottom. Actually, if he had bothered to read IBM's [Announcement Letter], he would have realized that IBM plans to continue to sell these until June. Of course, IBM will continue to support both new and existing DS6800 customers for many years to come.
Technically, BarryB does not make any factually incorrect statements for me to correct on his blog. The idea that a product is "dead" is, of course, just opinion, and competitors poke fun at each others' announcements every day. One could argue that the EMC V-Max was "dead" after the ITG whitepaper [Cost/Benefit Case for IBM XIV Storage System - Comparing Costs for IBM XIV and EMC V-Max Systems] demonstrated that the IBM XIV cost 63 percent less than a comparable EMC V-Max over the life of three years total cost of ownership (TCO) back in July 2009. The comparison was made with data from clients in a variety of industries including manufacturing, health care, life sciences, telecommunications, financial services, and the public sector. This could explain why so many EMC customers are buying or investigating the IBM XIV and the rest of the IBM storage portfolio.
technorati tags: announcements
, Barry Burke
“In times of universal deceit, telling the truth will be a revolutionary act.”
-- George Orwell
Well, it has been over two years since I first covered IBM's acquisition of the XIV company. Amazingly, I still see a lot of misperceptions out in the blogosphere, especially those regarding double drive failures for the XIV storage system. Despite various attempts to [explain XIV resiliency] and to [dispel the rumors], there are still competitors making stuff up, putting fear, uncertainty and doubt into the minds of prospective XIV clients.
Clients love the IBM XIV storage system! In this economy, companies are not stupid. Before buying any enterprise-class disk system, they ask the tough questions, run evaluation tests, and all the other due diligence often referred to as "kicking the tires". Here is what some IBM clients have said about their XIV systems:
“3-5 minutes vs. 8-10 hours rebuild time...”
-- satisfied XIV client
“...we tested an entire module failure - all data is re-distributed in under 6 hours...only 3-5% performance degradation during rebuild...”
-- excited XIV client
“Not only did XIV meet our expectations, it greatly exceeded them...”
-- delighted XIV client
In this blog post, I hope to set the record straight. It is not my intent to embarrass anyone in particular, so instead will focus on a fact-based approach.
- Fact: IBM has sold THOUSANDS of XIV systems
XIV is "proven" technology with thousands of XIV systems in company data centers. And by systems, I mean full disk systems with 6 to 15 modules in a single rack, twelve drives per module. That equates to hundreds of thousands of disk drives in production TODAY, comparable to the number of disk drives studied by [Google], and [Carnegie Mellon University] that I discussed in my blog post [Fleet Cars and Skin Cells].
- Fact: To date, no customer has lost data as a result of a Double Drive Failure on XIV storage system
This has always been true, both when XIV was a stand-alone company and since the IBM acquisition two years ago. When examining the resilience of an array to any single or multiple component failures, it's important to understand the architecture and the design of the system and not assume all systems are alike. At it's core, XIV is a grid-based storage system. IBM XIV does not use traditional RAID-5 or RAID-10 method, but instead data is distributed across loosely connected data modules which act as independent building blocks. XIV divides each LUN into 1MB "chunks", and stores two copies of each chunk on separate drives in separate modules. We call this "RAID-X".
Spreading all the data across many drives is not unique to XIV. Many disk systems, including EMC CLARiiON-based V-Max, HP EVA, and Hitachi Data Systems (HDS) USP-V, allow customers to get XIV-like performance by spreading LUNs across multiple RAID ranks. This is known in the industry as "wide-striping". Some vendors use the terms "metavolumes" or "extent pools" to refer to their implementations of wide-striping. Clients have coined their own phrases, such as "stripes across stripes", "plaid stripes", or "RAID 500". It is highly unlikely that an XIV will experience a double drive failure that ultimately requires recovery of files or LUNs, and is substantially less vulnerable to data loss than an EVA, USP-V or V-Max configured in RAID-5. Fellow blogger Keith Stevenson (IBM) compared XIV's RAID-X design to other forms of RAID in his post [RAID in the 21st Centure].
- Fact: IBM XIV is designed to minimize the likelihood and impact of a double drive failure
The independent failure of two drives is a rare occurrence. More data has been lost from hash collisions on EMC Centera than from double drive failures on XIV, and hash collisions are also very rare. While the published worst-case time to re-protect from a 1TB drive failure for a fully-configured XIV is 30 minutes, field experience shows XIV regaining full redundancy on average in 12 minutes. That is 40 times less likely than a typical 8-10 hour window for a RAID-5 configuration.
A lot of bad things can happen in those 8-10 hours of traditional RAID rebuild. Performance can be seriously degraded. Other components may be affected, as they share cache, connected to the same backplane or bus, or co-dependent in some other manner. An engineer supporting the customer onsite during a RAID-5 rebuild might pull the wrong drive, thereby causing a double drive failure they were hoping to avoid. Having IBM XIV rebuild in only a few minutes addresses this "human factor".
In his post [XIV drive management], fellow blogger Jim Kelly (IBM) covers a variety of reasons why storage admins feel double drive failures are more than just random chance. XIV avoids load stress normally associated with traditional RAID rebuild by evenly spreading out the workload across all drives. This is known in the industry as "wear-leveling". When the first drive fails, the recovery is spread across the remaining 179 drives, so that each drive only processes about 1 percent of the data. The [Ultrastar A7K1000] 1TB SATA disk drives that IBM uses from HGST have specified 1.2 million hours mean-time-between-failures [MTBF] would average about one drive failing every nine months in a 180-drive XIV system. However, field experience shows that an XIV system will experience, on average, one drive failure per 13 months, comparable to what companies experience with more robust Fibre Channel drives. That's innovative XIV wear-leveling at work!
- Fact: In the highly unlikely event that a DDF were to occur, you will have full read/write access to nearly all of your data on the XIV, all but a few GB.
Even though it has NEVER happened in the field, some clients and prospects are curious what a double drive failure on an XIV would look like. First, a critical alert message would be sent to both the client and IBM, and a "union list" is generated, identifying all the chunks in common. The worst case on a 15-module XIV fully loaded with 79TB data is approximately 9000 chunks, or 9GB of data. The remaining 78.991 TB of unaffected data are fully accessible for read or write. Any I/O requests for the chunks in the "union list" will have no response yet, so there is no way for host applications to access outdated information or cause any corruption.
(One blogger compared losing data on the XIV to drilling a hole through the phone book. Mathematically, the drill bit would be only 1/16th of an inch, or 1.60 millimeters for you folks outside the USA. Enough to knock out perhaps one character from a name or phone number on each page. If you have ever seen an actor in the movies look up a phone number in a telephone booth then yank out a page from the phone book, the XIV equivalent would be cutting out 1/8th of a page from an 1100 page phone book. In both cases, all of the rest of the unaffected information is full accessible, and it is easy to identify which information is missing.)
If the second drive failed several minutes after the first drive, the process for full redundancy is already well under way. This means the union list is considerably shorter or completely empty, and substantially fewer chunks are impacted. Contrast this with RAID-5, where being 99 percent complete on the rebuild when the second drive fails is just as catastrophic as having both drives fail simultaneously.
- Fact: After a DDF event, the files on these few GB can be identified for recovery.
Once IBM receives notification of a critical event, an IBM engineer immediately connects to the XIV using remote service support method. There is no need to send someone physically onsite, the repair actions can be done remotely. The IBM engineer has tools from HGST to recover, in most cases, all of the data.
Any "union" chunk that the HGST tools are unable to recover will be set to "media error" mode. The IBM engineer can provide the client a list of the XIV LUNs and LBAs that are on the "media error" list. From this list, the client can determine which hosts these LUNs are attached to, and run file scan utility to the file systems that these LUNs represent. Files that get a media error during this scan will be listed as needing recovery. A chunk could contain several small files, or the chunk could be just part of a large file. To minimize time, the scans and recoveries can all be prioritized and performed in parallel across host systems zoned to these LUNs.
As with any file or volume recovery, keep in mind that these might be part of a larger consistency group, and that your recovery procedures should make sense for the applications involved. In any case, you are probably going to be up-and-running in less time with XIV than recovery from a RAID-5 double failure would take, and certainly nowhere near "beyond repair" that other vendors might have you believe.
- Fact: This does not mean you can eliminate all Disaster Recovery planning!
To put this in perspective, you are more likely to lose XIV data from an earthquake, hurricane, fire or flood than from a double drive failure. As with any unlikely disaster, it is best to have a disaster recovery plan than to hope it never happens. All disk systems that sit on a single datacenter floor are vulnerable to such disasters.
For mission-critical applications, IBM recommends using disk mirroring capability. IBM XIV storage system offers synchronous and asynchronous mirroring natively, both included at no additional charge.
For more about IBM XIV reliability, read this whitepaper [IBM XIV© Storage System: Reliability Reinvented]. To find out why so many clients LOVE their XIV, contact your local IBM storage sales rep or IBM Business Partner.
technorati tags: IBM, XIV, DDF, RAID-5, RAID-10, RAID-X, RAID-6, RAID-DP, HP, EVA, HDS, USP-V, EMC, CLARiiON, V-Max, Disaster Recovery, HGST, UltraStar, A7K1000
Now that the US Recession has been declared over, companies are looking to invest in IT again. To help you plan your upcoming investments, here are some upcoming events in April.
- SNW Spring 2010, April 12-15
IBM is a Platinum Plus sponsor at this [Storage Networking World event], to be held April 12-15 at the Rosen Shingle Creek Resort in Orlando, Florida. If you are planning to go, here's what you can go look for:
- IBM booth at the Solution Center featuring the DS8700 and XIV disk systems, SONAS and the Smart Business Storage Cloud (SBSC), and various Tivoli storage software
- IBM kiosk at the Platinum Galleria focusing on storage solutions for SAP and Microsoft environments
- IBM Senior Engineer Mark Fleming presenting "Understanding High Availability in the SAN"
- IBM sponsored "Expo Lunch" on Tuesday, April 13, featuring Neville Yates, CTO of IBM ProtecTIER, presenting "Data Deduplication -- It's not Magic - It's Math!"
- IBM CTO Vincent Hsu presenting "Intelligent Storage: High Performance and Hot Spot Elimination"
- IBM Senior Technical Staff Member (STSM) Gordon Arnold presenting "Cloud Storage Security"
- One-on-One meetings with IBM executives
I have personally worked with Mark, Neville, Vincent and Gordon, so I am sure they will do a great job in their presentations. Sadly, I won't be there myself, but fellow blogger [Rich Swain from IBM] will be at the event to blog about all the actviities there.
- Systems for a Smarter Planet webinar, April 15
Can't travel to Orlando? On April 15, IBM will offer a [Systems for a Smarter Planet webinar] to highlight IBM's vision, strategy and latest offerings. Speakers include:
- Jim Stallings - General Manager, Global Markets, IBM Systems and Technology Group
- Scott Handy - Vice President, WW Marketing, Power Systems, IBM Systems and Technology Group
- Dan Galvan - Vice President, Marketing & Strategy, Storage and Networking Systems, IBM Systems and Technology Group
- Inna Kuznetsova - Vice President, Marketing and Sales Enablement, Systems Software, IBM Systems and Technology Group
- Jeanine Cotter - Vice President, Systems Services, IBM Global Technology Services
The webinar will include client testimonials from various companies as well.
- Dynamic Infrastructure Executive Summit, April 27-29
I will be there, at this this 2-and-a-half-day [Executive Summit] in Scottsdale, Arizona, to talk to company executives. Discover how IBM can help you manage your ever-increasing amount of information with an end-to-end, innovative approach to building a dynamic infrastructure. You will learn all of our innovative solutions and find out how you can effectively transform your enterprise for a smarter planet.
It's looking to be a busy month!
technorati tags: , IBM, SNW, DS8700, XIV, SONAS, SBSC, Tivoli, CTO, ProtecTIER, Deduplication, SAP, Microsoft, webinar, summit, Orlando, Florida, Scottsdale, Arizona, #ibmsystems, #dyninfra
Continuing my discussion of this week's announcements of IBM storage products, I will cover the announcements that double storage capacity per footprint.
- Linear Tape Open - Generation 5
IBM announced [LTO-5 drives], the TS2250 half-height and the TS2350 full-height drives, as well as support for LTO-5 drives in its various tape libraries: TS3100, TS3200, and TS3500. The native 1.5TB capacity of the LTO-5 cartridge is nearly double the 800GB capacity of the LTO-4 predecessor. With 2:1 compression, that's 3TB of data per cartridge! Performance-wise, the data transfer rate is 140 MB/sec, about 17 percent improvement over the 120MB/sec of the LTO-4 technology. The TS2250, TS2350, TS3100 and TS3200 now all offer dual-SAS ports for higher availability.
LTO-5 carries forward many of the advancements of past generations. For example, LTO-5 continues the G-2/G-1 "backward compatibility" architecture, which means that the LTO-5 drive can read LTO-3 and LTO-4 cartridges, and can write LTO-4 cartridges. Like the LTO-3 and LTO-4, the same LTO-5 drive can read and write WORM or regular rewriteable cartridges. Like the LTO-4, the LTO-5 offers drive-level data-at-rest encryption. These use a symmetric 256-bit AES key, managed by IBM Tivoli Key Lifecycle Manager (TKLM).
One thing that is new in LTO-5 is the Long Term File System [LTFS] available on the TS2250 and TS2350, which allows you to treat the tape as a hierarchical file system, with files and folders, that you can drag and drop like any other file system.
- XIV storage system
IBM [doubles the capacity of the XIV storage system] by supporting 2TB SATA drives. A full 15-module frame can hold up to 161TB of usable capacity. The smallest 6-module system with 2TB can hold up to 55TB of usable capacity. At this time, all of the drives in an XIV must be the same type, so we do not yet allow intermix of 1TB and 2TB in the same frame. The 2TB are more energy efficient, with a full 15-module frame consuming on average 6.7 kVA, compared to 7.8 kVA for the 1TB drives. The performance is roughly the same, so if, for example, your application workload got 3700 IOPS per module with 1TB drives, it will get about the same 3700 IOPS per module with 2TB drives.
- TS7650 ProtecTIER Data Deduplication
IBM now supports [many-to-one virtual tape volume mirroring] on the ProtecTIER. In other words, you can have two or more locations sending data to a single ProtecTIER disaster recovery site.
- N series disk system
The EXN1000 and EXN3000 can now double in capacity with 2TB SATA drives. These can be attached to the N3000 entry-level models, such as the N3400.
- DS3000 disk system
The DS3200, DS3300 and DS3400, as well as their related expansion drawers, now supports 2TB SATA drives. This means that a single control unit with three expansion drawers can hold up to 96TB of raw capacity (48 drives).
- DS8700 disk system
The DS8700 also now supports 2TB SATA drives, for a maximum raw capacity over 2PB, as well as new 600GB Fibre Channel drives. Now that IBM offers [Easy Tier] functionality, pairing Solid State Drives with slower, energy-efficient SATA disk makes a lot of financial sense.
That's a lot of announcements! As always, feel free to dig into each of the links to learn more about each product.
technorati tags: IBM, LTO-5, TS2250, TS2350, TS3100, TS3200, TS500, AES, TKLM, LTFS, XIV, 2TB, TS7650, TS7650G, EXN1000, EXN3000, N3400, DS3200, DS3300, DS3400, DS8700, SATA
My colleagues, Harley Puckett (left) and Jack Arnold (right) were highlighted in today's Arizona Daily Star, our local newspaper, as part of an article on IBM's success and leadership in the IT storage industry. At 1400 employees here in Tucson, IBM is Southern Arizona's 36th largest employer.
Highlighted in the article:
- DS8700 with the new Easy Tier feature
- TS7650 ProtecTIER virtual tape library with data deduplication capability
- LTO-5 tape and the new Long Term File System (LTFS)
- XIV with the new 2TB drive, for a maximum per-rack usable capacity of 161 TB.
Read the full article [IBMers Crank Out 4 New Offerings To Handle Data Deluge]
technorati tags: , Arizona Daily Star, IBM Tucson, DS8700, Easy Tier, ProtecTIER, Deduplication, LTO-5, LTFS, XIV, IBM, Tucson, Arizona
This week, Tuesday, Wednesday and Thursday, I am at the IBM Dynamic Infrastructure Executive Summit at the beautiful Fairmont Resort in Scottsdale, Arizona. This is a mix of indoor and outdoor meetings, one-on-ones with IBM executives, and main-tent sessions.
The Solutions Showcase will cover the following:
- Smarter Systems
As the bar for performance gets higher and the need to manage, store and analyze massive amounts of information escalates, systems must scale to meet the needs of the business. The latest server and storage technology innovations including: POWER7, eX5, XIV, ProtecTIER, SONAS, and System z Solution Editions.
- Smarter Data Centers
Today’s data centers are under extreme power and cooling pressures and space constraints. How can you get more out of your existing facility, while planning for future requirements? IBM energy efficiency consultants will tell you how you can reduce both CAPEX and OPEX costs and plan for future growth with consolidation and virtualization, energy efficient (energy star) equipment and modular data center solutions. Be sure to check out the IBM Portable Modular Data Center (PMDC) that fits in a standard shipping crate!
- Smarter Clouds
IBM’s Cloud Computing solutions provide you with flexible, dynamic, secure and cost-efficient delivery choices from pay-per-use (by the hour, week or year) at IBM cloud centers around the world, conditioning your infrastructure to build your own private cloud or out-of-the box cloud solutions that are quick and easy to deploy. Which workloads are the best fit for cloud computing? How do you decide which cloud computing is right for your organization? Cloud experts will talk about the options, give you recommendations based on your business objectives and help you get started.
Hope to see you there!
technorati tags: IBM, Dynamic Infrastructure, Executive Summit, POWER7, eX5, Fairmot, XIV, ProtecTIER, SONAS, PMDC, Cloud Computing