Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Those that prefer to work with one-stop shopping of an IT Supermarket, with companies like IBM, HP and Dell who offer a complete set of servers, storage, switches, software and services, what we call "The Five S's".
Those that perfer shopping for components at individual specialty shops, like butchers, bakers, and candlestick makers, hoping that this singular focus means the products are best-of-breed in the market. Companies like HDS for disk, Quantum for tape, and Symantec for software come to mind.
My how the IT landscape for vendors has evolved in just the past five years! Cisco starts to sell servers, and enters a "mini-mall" alliance with EMC and VMware to offer vBlock integrated stack of server, storage and switches with VMware as the software hypervisor. For those not familiar with the concept of mini-malls, these are typically rows of specialty shops. A shopper can park their car once, and do all their shopping from the various shops in the mini-mall. Not quite "one-stop" shopping of a supermarket, but tries to address the same need.
("Who do I call when it breaks?" -- The three companies formed a puppet company, the Virtual Computing Environment company, or VCE, to help answer that question!)
Among the many things IBM has learned in its 100+ years of experience, it is that clients want choices. Cisco figured this out also, and partnered with NetApp to offer the aptly-named FlexPod reference architecture. In effect, Cisco has two boyfriends, when she is with EMC, it is called a Vblock, and when she is with NetApp, it is called a FlexPod. I was lucky enough to find this graphic to help explain the three-way love triangle.
Did this move put a strain on the relationship between Cisco and EMC? Last month, EMC announced VSPEX, a FlexPod-like approach that provides a choice of servers, and some leeway for resellers to make choices to fit client needs better. Why limit yourself to Cisco servers, when IBM and HP servers are better? Is this an admission that Vblock has failed, and that VSPEX is the new way of doing things? No, I suspect it is just EMC's way to strike back at both Cisco and NetApp in what many are calling the "Stack Wars". (See [The Stack Wars have Begun!], [What is the Enterprise Stack?], or [The Fight for the Fully Virtualized Data Center] for more on this.)
(FTC Disclosure: I am both an employee and shareholder of IBM, so the U.S. Federal Trade Commission may consider this post a paid, celebrity endorsement of the IBM PureFlex system. IBM has working relationships with Cisco, NetApp, and Quantum. I was not paid to mention, nor have I any financial interest in, any of the other companies mentioned in this blog post. )
Last month, IBM announced its new PureSystems family, ushering in a [new era in computing]. I invite you all to check out the many "Paterns of Expertise" available at the [IBM PureSystems Centre]. This is like an "app store" for the data center, and what I feel truly differentiates IBM's offerings from the rest.
The trend is obvious. Clients who previously purchased from specialty shops are discovering the cost and complexity of building workable systems from piece-parts from separate vendors has proven expensive and challenging. IBM PureFlex™ systems eliminate a lot of the complexity and effort, but still offer plenty of flexibility, choice of server processor types, choice of server and storage hypervisors, and choice of various operating systems.
It's Tuesday, and that means more IBM announcements!
I haven't even finished blogging about all the other stuff that got announced last week, and here we are with more announcements. Since IBM's big [Pulse 2010 Conference] is next week, I thought I would cover this week's announcement on Tivoli Storage Manager (TSM) v6.2 release. Here are the highlights:
Client-Side Data Deduplication
This is sometimes referred to as "source-side" deduplication, as storage admins can get confused on which servers are clients in a TSM client-server deployment. The idea is to identify duplicates at the TSM client node, before sending to the TSM server. This is done at the block level, so even files that are similar but not identical, such as slight variations from a master copy, can benefit. The dedupe process is based on a shared index across all clients, and the TSM server, so if you have a file that is similar to a file on a different node, the duplicate blocks that are identical in both would be deduplicated.
This feature is available for both backup and archive data, and can also be useful for archives using the IBM System Storage Archive Manager (SSAM) v6.2 interface.
Simplified management of Server virtualization
TSM 6.2 improves its support of VMware guests by adding auto-discovery. Now, when you spontaneously create a new virtual machine OS guest image, you won't have to tell TSM, it will discover this automatically! TSM's legendary support of VMware Consolidated Backup (VCB) now eliminates the manual process of keeping track of guest images. TSM also added support of the Vstorage API for file level backup and recovery.
While IBM is the #1 reseller of VMware, we also support other forms of server virtualization. In this release, IBM adds support for Microsoft Hyper-V, including support using Microsoft's Volume Shadow Copy Services (VSS).
Automated Client Deployment
Do you have clients at all different levels of TSM backup-archive client code deployed all over the place? TSM v6.2 can upgrade these clients up to the latest client level automatically, using push technology, from any client running v5.4 and above. This can be scheduled so that only certain clients are upgraded at a time.
Simultaneous Background Tasks
The TSM server has many background administrative tasks:
Migration of data from one storage pool to another, based on policies, such as moving backups and archives on a disk pool over to a tape pools to make room for new incoming data.
Storage pool backup, typically data on a disk pool is copied to a tape pool to be kept off-site.
Copy active data. In TSM terminology, if you have multiple backup versions, the most recent version is called the active version, and the older versions are called inactive. TSM can copy just the active versions to a separate, smaller disk pool.
In previous releases, these were done one at a time, so it could make for a long service window. With TSM v6.2, these three tasks are now run simultaneously, in parallel, so that they all get done in less time, greatly reducing the server maintenance window, and freeing up tape drives for incoming backup and archive data. Often, the same file on a disk pool is going to be processed by two or more of these scheduled tasks, so it makes sense to read it once and do all the copies and migrations at one time while the data is in buffer memory.
Enhanced Security during Data Transmission
Previous releases of TSM offered secure in-flight transmission of data for Windows and AIX clients. This security uses Secure Socket Layer (SSL) with 256-bit AES encryption. With TSM v6.2, this feature is expanded to support Linux, HP-UX and Solaris.
Improved support for Enterprise Resource Planning (ERP) applications
I remember back when we used to call these TDPs (Tivoli Data Protectors). TSM for ERP allows backup of ERP applications, seemlessly integrating with database-specific tools like IBM DB2, Oracle RMAN, and SAP BR*Tools. This allows one-to-many and many-to-one configurations between SAP servers and TSM servers. In other words, you can have one SAP server backup to several TSM servers, or several SAP servers backup to a single TSM server. This is done by splitting up data bases into "sub-database objects", and then process each object separately. This can be extremely helpful if you have databases over 1TB in size. In the event that backing up an object fails and has to be re-started, it does not impact the backup of the other objects.
This week I was aboard the Queen Mary in Long Beach, California! This was a business event organized by [Key Info Systems], a valued IBM Business Partner. Key Info resells IBM servers, storage and switches.
The Queen Mary retired in 1967, and has been converted into a hotel and events venue. The locals just parked their car and walked on board, but I got to stay Tuesday through Thursday in one of the cabins. It was long and narrow, with round windows! There were four dials for the bathtub: Cold Salt, Hot Fresh, Cold Fresh, and Hot Salt.
Stepping on the boat was like walking back in time through history! If you decide to go see it, check out the [Art Deco bar at the front of the Promenade deck. The ship is still in the water, but is permanently docked. It is sectioned off to prevent the ocean waves from affecting it, so we did not have the nauseous moving back and forth normally associated with cruise ships.
(It is with a bit of irony that we are on the Queen Mary just days after the tragedy of the [Costa Concordia], the largest Italian cruise ship that ran aground near Isola de Giglio. The captain will have to explain how he [fell into a lifeboat] before he had a chance to wait for everyone else to get safely off the shipwreck. He was certainly no [Captain Sulley]! I am thankful that most of the 4,200 people survived the incident.)
Lief Morin, Founder and Chief Executive for Key Info Systems, kicked off the meeting with highlights of 2011 successes. I have known Lief for years, as Key Info comes to the Tucson EBC on a frequent basis. This event was designed to give his sellers an update of what is the latest for each product line, and what to look forward to in the next 12-18 months.
The next speaker was from Vision Solutions that provides High Availability solutions for IBM i on Power Systems. In 2010, their company nearly doubled in size with the acquisition of Double-Take, which provides data replication for x86 servers running Windows, Linux, VMware, Hyper-V and other hypervisors. The capabilities of Double-Take sounded similar to what IBM offers with [Tivoli Storage Manager FastBack] and [Tivoli Storage Manager for Virtual Environments].
Dinner at Sir Winston's
Rather than take the "Ghosts and Legends" tour, I opted for dinner at the Queen Mary's signature restaurant, Sir Winston's. This is a fancy place, so dress accordingly. If you want the Raspberry soufflé, order it early as it takes 30 minutes to prepare!
[Storwize V7000], including the new Storwize V7000 Unified configuration
Storage is an important part of the Key Info Systems revenue stream, so I was glad to have lots of questions and interactions from the audience.
Murder Mystery Dinner
The acting troupe from [Dinner Detective] put on quite the show for us! With all that is going on in the world, it is good to laugh out loud every now and then.
In other murder mystery dinners I have participated in, each person is assigned a "character" and given a script of what to say and when to say it. This was different, we got to pick our own characters. I chose "Doctor Watson", from the Sherlock Holmes series. Several attendees thought it was a double meaning with [IBM Watson], the computer that figured out the clues on Jeopardy! television game show, and has since been [put to work at Wellpoint] to help out the Healthcare industry.
After the "murder" happened, two actors portraying policemen selected members of the audience to answer questions. We didn't get a script of what to say, so everyone had to "ad lib". I was singled out as a suspect, and had fun playing along in character. One of the attendees afterwards said he was impressed that I was able to fabricate such amusing and elaborate responses to their personal and embarassing questions. As a public speaker for IBM, I have had a lot of practice thinking quickly on my feet.
Fibre Channel and Ethernet Switches
The next two speakers gave us an update on Fibre Channel and Ethernet switches, and their thoughts on the inevitability of Fibre Channel over Ethernet (FCoE). One of the exciting new developments is the [Brocade Network Subscription] which creates a flexible pay-per-use Ethernet port rental model for customers. This is especially timely given the Financial Accounting Standards Board proposed [FASB Change 13] that affects operating leases in the balance sheet.
With the Brocade Network Subscription, you pay monthly for the ports you are using. Need more ports, Brocade will install the added gear. Use fewer ports, Brocade will take the equipment back. There is no term endpoint or residual value like tradtional leasing, so when you are done using the equipment, give it back any time. This is ideal for companies that may need to have a lot of Ethernet ports for the next 2-3 years, but then plan to taper down, and don't want to get stuck with a long-term commitment or capital depreciation.
The last speaker was from VMware. IBM is the #1 reseller of VMware, and VMware commands an impressive 81 percent marketshare in the x86 virtualization space. The speaker presented VMware's strategy going forward, which aligns well with IBM's own strategy, to help companies Cloud-enable their existing IT infrastructures, in preparation for eventual moves to Hybrid or Public cloud deployments.
Special thanks to Lief Morin for sponsoring this event, Raquel Hernandez from IBM for coordinating my travel, and Pete, Christina and Kendrell from Key Info Systems for organizing the activities!
"With Cisco Systems, EMC, and VMware teaming up to sell integrated IT stacks, Oracle buying Sun Microsystems to create its own integrated stacks, and IBM having sold integrated legacy system stacks and rolling in profits from them for decades, it was only a matter of time before other big IT players paired off."
Once again we are reminded that IBM, as an IT "supermarket", is able to deliver integrated software/server/storage solutions, and our competitors are scrambling to form their own alliances to be "more like IBM." This week, IBM announced new ordering options for storage software with System x servers, including BladeCenter blade servers and IntelliStation workstations. Here's a quick recap:
IBM Tivoli Storage Manager FastBack v6.1 supports both Windows and Linux! FastBack is a data protection solution for ROBO (Remote Office, Branch Office) locations. It can protect Microsoft Exchange, Lotus Domino, DB2, Oracle applications. FastBack can provide full volume-level recovery, as well as individual file recovery, and in some cases Bare Machine Recovery. FastBack v6.1 can be run stand-alone, or integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution.
FlashCopy Manager v2.1
FlashCopy Manager uses point-in-time copy capabilities, such as SnapShot or FlashCopy, to protect application data using an application-aware approach for Microsoft Exchange, Microsoft SQL server, DB2, Oracle, and SAP. It can be used with IBM SAN Volume Controller (SVC), DS8000 series, DS5000 series, DS4000 series, DS3000 series, and XIV storage systems. When applicable, FlashCopy manager coordinates its work with Microsoft's Volume Shadow Copy Services (VSS) interface. FlashCopy Manager can provide data protection using just point-in-time disk-resident copies, or can be integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution to move backup images to external storage pools, such as low-cost, energy-efficient tape cartridges.
General Parallel File System (GPFS) v3.3 Multiplatform
GPFS can support AIX, Linux, and Windows! Version 3.3 adds support for Windows 2008 Server on 64-bit chipset architectures from AMD and Intel. Now you can have a common GPFS cluster with AIX, Linux and Windows servers all sharing and accessing the same files. A GPFS cluster can have up to 256 file systems. Each of these file systems can be up to 1 billion files, up to 1PB of data, and can have up to 256 snapshots. GPFS can be used stand-alone, or integrated with a full IBM Tivoli Storage Manager (TSM) unified recovery management solution with parallel backup streams.
For full details on these new ordering options, see the IBM [Press Release].
Over on the Tivoli Storage Blog, there is an exchange over the concept of a "Storage Hypervisor". This started with fellow IBMer Ron Riffe's blog post [Enabling Private IT for Storage Cloud -- Part I], with a promise to provide parts 2 and 3 in the next few weeks. Here's an excerpt:
"Storage resources are virtualized. Do you remember back when applications ran on machines that really were physical servers (all that “physical” stuff that kept everything in one place and slowed all your processes down)? Most folks are rapidly putting those days behind them.
In August, Gartner published a paper [Use Heterogeneous Storage Virtualization as a Bridge to the Cloud] that observed “Heterogeneous storage virtualization devices can consolidate a diverse storage infrastructure around a common access, management and provisioning point, and offer a bridge from traditional storage infrastructures to a private cloud storage environment” (there’s that “cloud” language). So, if I’m going to use a storage hypervisor as a first step toward cloud enabling my private storage environment, what differences should I expect? (good question, we get that one all the time!)
The basic idea behind hypervisors (server or storage) is that they allow you to gather up physical resources into a pool, and then consume virtual slices of that pool until it’s all gone (this is how you get the really high utilization). The kicker comes from being able to non-disruptively move those slices around. In the case of a storage hypervisor, you can move a slice (or virtual volume) from tier to tier, from vendor to vendor, and now, from site to site all while the applications are online and accessing the data. This opens up all kinds of use cases that have been described as “cloud”. One of the coolest is inter-site application migration.
A good storage hypervisor helps you be smart.
Application owners come to you for storage capacity because you’re responsible for the storage at your company. In the old days, if they requested 500GB of capacity, you allocated 500GB off of some tier-1 physical array – and there it sat. But then you discovered storage hypervisors! Now you tell that application owner he has 500GB of capacity… What he really has is a 500GB virtual volume that is thin provisioned, compressed, and backed by lower-tier disks. When he has a few data blocks that get really hot, the storage hypervisor dynamically moves just those blocks to higher tier storage like SSD’s. His virtual disk can be accessed anywhere across vendors, tiers and even datacenters. And in the background you have changed the vendor storage he is actually sitting on twice because you found a better supplier. But he doesn’t know any of this because he only sees the 500GB virtual volume you gave him. It’s 'in the cloud'."
"Let’s start with a quick walk down memory lane. Do you remember what your data protection environment looked like before virtualization? There was a server with an operating system and an application… and that thing had a backup agent on it to capture backup copies and send them someplace (most likely over an IP network) for safe keeping. It worked, but it took a lot of time to deploy and maintain all the agents, a lot of bandwidth to transmit the data, and a lot of disk or tapes to store it all. The topic of data protection has modernized quite a bit since then.
Fast forward to today. Modernization has come from three different sources – the server hypervisor, the storage hypervisor and the unified recovery manager. The end result is a data protection environment that captures all the data it needs in one coordinated snapshot action, efficiently stores those snapshots, and provides for recovery of just about any slice of data you could want. It’s quite the beautiful thing."
At this point, you might scratch your head and ask "Does this Storage Hypervisor exist, or is this just a theoretical exercise?" The answer of course is "Yes, it does exist!" Just like VMware offers vSphere and vCenter, IBM offers block-level disk virtualization through the SAN Volume Controller(SVC) and Storwize V7000 products, with a full management support from Tivoli Storage Productivity Center Standard Edition.
SVC has supported every release of VMware since the 2.5 version. IBM is the leading reseller of VMware, so it makes sense for IBM and VMware development to collaborate and make sure all the products run smoothly together. SVC presents volumes that can be formatted for VMFS file system to hold your VMDK files, accessible via FCP protocol. IBM and VMware have some key synergies:
Management integration with Tivoli Storage Productivity Center and VMware vCenter plug-in
VAAI support: Hardware-assisted locking, hardware-assisted zeroing, and hardware-assisted copying. Some of the competitors, like EMC VPLEX, don't have this!
Space-efficient FlashCopy. Let's say you need 250 VM images, all running a particular level of Windows. A boot volume of 20GB each would consume 5000GB (5 TB) of capacity. Instead, create a Golden Master volume. Then, take 249 copies with space-efficient FlashCopy, which only consumes space for the modified portions of the new volumes. For each copy, make the necessary changes like unique hostname and IP address, changing only a few blocks of data each. The end result? 250 unique VM boot volumes in less than 25GB of space, a 200:1 reduction!
Support for VMware's Site Recovery Manager using SVC's Metro Mirror or Global Mirror features for remote-distance replication.
Data center federation. SVC allows you to seamlessly do vMotion from one datacenter to another using its "stretched cluster" capability. Basically, SVC makes a single image of the volume available to both locations, and stores two physical copies, one in each location. You can lose either datacenter and still have uninterrupted access to your data. VMware's HA or Fault Tolerance features can kick in, same as usual.
But unlike tools that work only with VMware, IBM's storage hypervisor works with a variety of server virtualization technologies, including Microsoft Hyper-V, Xen, OracleVM, Linux KVM, PowerVM, z/VM and PR/SM. This is important, as a recent poll on the Hot Aisle blog indicates that [44 percent run 2 or more server hypervisors]!
Join the conversation! The virtual dialogue on this topic will continue in a [live group chat] this Friday, September 23, 2011 from 12 noon to 1pm EDT. Join me and about 20 other top storage bloggers, key industry analysts and IBM Storage subject matter experts to discuss storage hypervisors and get questions answered about improving your private storage environment.
Last week, fellow IBMer Ron Riffe started his three-part series on the Storage Hypervisor. I discussed Part I already in my previous post [Storage Hypervisor Integration with VMware]. We wrapped up the week with a Live Chat with over 30 IT managers, industry analysts, independent bloggers, and IBM storage experts.
"The idea of shopping from a catalog isn’t new and the cost efficiency it offers to the supplier isn’t new either. Public storage cloud service providers seized on the catalog idea quickly as both a means of providing a clear description of available services to their clients, and of controlling costs. Here’s the idea… I can go to a public cloud storage provider like Amazon S3, Nirvanix, Google Storage for Developers, or any of a host of other providers, give them my credit card, and get some storage capacity. Now, the “kind” of storage capacity I get depends on the service level I choose from their catalog.
Most of today’s private IT environments represent the complete other end of the pendulum swing – total customization. Every application owner, every business unit, every department wants to have complete flexibility to customize their storage services in any way they want. This expectation is one of the reasons so many private IT environments have such a heavy mix of tier-1 storage. Since there is no structure around the kind of requests that are coming in, the only way to be prepared is to have a disk array that could service anything that shows up. Not very efficient… There has to be a middle ground.
Private storage clouds are a little different. Administrators we talk to aren’t generally ready to let all their application owners and departments have the freedom to provision new storage on their own without any control. In most cases, new capacity requests still need to stop off at the IT administration group. But once the request gets there, life for the IT administrator is sweet!
Here comes the request from an application owner for 500GB of new “Database” capacity (one of the options available in the storage service catalog) to be attached to some server. After appropriate approvals, the administrator can simply enter the three important pieces of information (type of storage = “Database”, quantity = 500GB, name of the system authorized to access the storage) and click the “Go” button (in TPC SE it’s actually a “Run now” button) to automatically provision and attach the storage. No more complicated checklists or time consuming manual procedures.
A storage hypervisor increases the utilization of storage resources, and optimizes what is most scarce in your environment. For Linux, UNIX and Windows servers, you typically see utilization rates of 20 to 35 percent, and this can be raised to 55 to 80 percent with a storage hypervisor. But what is most scarce in your environment? Time! In a competitive world, it is not big animals eating smaller ones as much as fast ones eating the slow.
Want faster time-to-market? A storage hypervisor can help reduce the time it takes to provision storage, from weeks down to minutes. If your business needs to react quickly to changes in the marketplace, you certainly don't want your IT infrastructure to slow you down like a boat anchor.
Want more time with your friends and family? A storage hypervisor can migrate the data non-disruptively, during the week, during the day, during normal operating hours, instead of scheduling down-time on an evenings and weekends. As companies adopt a 24-by-7 approach to operations, there are fewer and fewer opportunities in the year for scheduled outages. Some companies get stuck paying maintenance after their warranty expires, because they were not able to move the data off in time.
Want to take advantage of the new Solid-State Drives? Most admins don't have time to figure out what applications, workloads or indexes would best benefit from this new technology? Let your storage hypervisor automated tiering do this for you! In fact, a storage hypervisor can gather enough performance and usage statistics to determine the characteristics of your workload in advance, so that you can predict whether solid-state drives are right for you, and how much benefit you would get from them.
Want more time spent on strategic projects? A storage hypervisor allows any server to connect to any storage. This eliminates the time wasted to determine when and how, and let's you focus on the what and why of your more strategic transformational projects.
If this sounds all too familiar, it is similar to the benefits that one gets from a server hypervisor -- better utilization of CPU resources, optimizing the management and administration time, with the agility and flexibility to deploy new technologies in and decommission older ones out.
"Server virtualization is a fairly easy concept to understand: Add a layer of software that allows processing capability to work across multiple operating environments. It drives both efficiency and performance because it puts to good use resources that would otherwise sit idle.
Storage virtualization is a different animal. It doesn't free up capacity that you didn't know you had. Rather, it allows existing storage resources to be combined and reconfigured to more closely match shifting data requirements. It's a subtle distinction, but one that makes a lot of difference between what many enterprises expect to gain from the technology and what it actually delivers."
Jon Toigo on his DrunkenData blog brings back the sanity with his post [Once More Into the Fray]. Here is an excerpt:
"What enables me to turn off certain value-add functionality is that it is smarter and more efficient to do these functions at a storage hypervisor layer, where services can be deployed and made available to all disk, not to just one stand bearing a vendor’s three letter acronym on its bezel. Doesn’t that make sense?
I think of an abstraction layer. We abstract away software components from commodity hardware components so that we can be more flexible in the delivery of services provided by software rather than isolating their functionality on specific hardware boxes. The latter creates islands of functionality, increasing the number of widgets that must be managed and requiring the constant inflation of the labor force required to manage an ever expanding kit. This is true for servers, for networks and for storage.
Can we please get past the BS discussion of what qualifies as a hypervisor in some guy’s opinion and instead focus on how we are going to deal with the reality of cutting budgets by 20% while increasing service levels by 10%. That, my friends, is the real challenge of our times."
Did you miss out on last Friday's Live Chat? We are doing it again this Friday, covering parts I and II of Ron's posts, so please join the conversation! The virtual dialogue on this topic will continue in another [Live Chat] on September 30, 2011 from 12 noon to 1pm Eastern Time.
Next week is [VMworld 2010], so I thought today would be a good day to write a blog post about reporting and managing virtual guest images.
As the original lead architect for IBM Tivoli Storage Productivity Center, I am no stranger to reporting and management tools. Needless to say, if you have lots of virtual guest images, it makes sense to deploy reporting and management software. I had never heard of Veeam before, but I decided to check out Veeam Reporter 4.0, an enterprise-level reporting solution specifically designed for large Virtual Infrastructure (VI3) and vSphere virtual environments that allows you to automatically discover and collect information about your VMware virtual environment.
Their 90-page User Guide offered these helpful "First Steps" on page 9 which I used as the master plan for my evaluation.
Install Veeam Reporter 4.0
The instructions appeared fairly straightforward: Download [the latest version] of the application. Unpack the downloaded archive and run the VeeamReporter.exe file. Then follow the installation wizard steps. What could go wrong?
I should have known better. Like IBM Tivoli Storage Productivity Center, Veeam Reporter is designed to be installed on its own server-class machine with its own application web server and database. I wasn't going to stand up a new server in our lab just for this contest, so I decided to just install it on my Windows XP SP3, which Veeam had listed as a supported operating system level. I ran into a series of installation issues, including installing IIS, installing SQL server, and installing the SRSS component. I am more familiar with IBM's WebSphere Application Server and DB2 combination used in IBM's own products, and have experience with Apache and MySQL on a standard LAMP stack, so my lack of experience with IIS and SQL server made the installation more difficult. Many thanks to all the support personnel at Veeam, Microsoft, and my internal IT department to finally get all of this working.
It appears you can set this up as a client/server environment, where the Veeam Reporter server runs IIS and SQL Server, and then you have a browser on your client machine point to that server. In my cases, I have client browser and server all on one machine.
Create and run a collection job
This step also seemed fairly standard for reporting tools. Once you launch Veeam Reporter 4.0 for the first time, you need to retrieve data from your virtual infrastructure to be able to generate reports. To start the created collection job, select it and click the Start button on the toolbar. If you have a vCenter server in your VI environment, we recommend that you create a job for it to immediately collect data for all objects in its hierarchy. After that, you will be able to select VI objects that were engaged in the performed job using the Workspace, and generate reports for it.
I signed up for this contest August 7, but step 1 above took me two weeks to resolve all the installation iissues. I wanted to get my blog post entry for the contest BEFORE the start of VMworld. Since I am in Dallas, Texas this week for the IBM Storage Solutions University, I had to go through several firewalls for my laptop to tunnel through and get to my VMware Center back in Tucson.
Click on the graphic above to see larger view.
I was able to create and run a collection job. I have a WMware ESX 3.5 host running five guest images and 14 datastores. This seemed to be enough to evaluate the basic features of this reporting tool. Veeam Reporter let's you run the collection process manually, or set a "periodic" schedule to collect data every hour.
Generate reports manually or create a reporting job
Finally, I get to the fun part: To generate report manually, click the Workspace tab, select a necessary VI object from the tree view, date and collection job session, choose reports and click the Create Report button.
At this point, I am reminded of a famous poem:
To see a world in a grain of sand
And a heaven in a wild flower,
Hold infinity in the palm of your hand
And eternity in an hour.
- William Blake
When evaluating products, try to imagine what the reports would look like with hundreds of virtual guest images. Certainly, I can see some potential, even though I had rather limited data to work with. In theory, the tool can create Visio output files, but you need to have Microsoft Visio installed. I have only "Visio Viewer" so I was unable to create any visio files with this product.
The reports can be exported to PDF, Word or Excel formats. Here is an example of an Excel spreadsheet export. While it has 14 bars for the 14 datastores, there are no labels, and the misleading details link in the lower right corner is non-functional. The only way for me to figure out what each referred to was to go back to my vCenter client, which kind of defeats the purpose of having a separate reporting tool.
This same report exported to PDF spanned across four pages, leaving the re-assembly to be done with a pair of scissors and celophane tape.
When you create reports, you can use SRSS or Veeam's internal proprietary format. Only SRSS reports can be put on the dashboard, so I recommend that.
Customize your dashboard
The fourth and final step is to configure your own dashboard: To add reports to the Dashboard, you should first create and save them using Workspace of Veeam Reporter 4.0. Keep in mind that you can add to the Dashboard only saved SSRS-based reports. To customize the Dashboard, click the Dashboard tab and then click the Edit Dashboard button. Customize the layout by dragging blue borders from the right and the bottom of the screen. Then, drag reports from the Reports list and drop them onto the created cells.
The "Free Edition" only allows you to put a single report on the dashboard, so as in step 3, you have to use your imagination of what the potential of the full license would looke like with multiple reports are on a single pane of glass.
(FTC Disclosure: I work for IBM, the leader in server virtualization worldwide, and the number #1 reseller of VMware. In this post, I review [Veeam Reporter 4.0] as my official entry for their blogging contest. IBM and Veeam do not have any business relationshiop that I know of, other than both being VMware business partners, so I am treating them here as an Independent Software Vendor (ISV). Veeam has not compensated me in any manner for this review, this review is not to be taken as an endorsement of Veeam or its products, and I was not provided any full or evaluator license keys. The review is based entirely on my experience using the "Free Edition" available to all for download. None of this blog post was pre-reviewed by anyone from Veeam. IBM, of course, also offers similar software, which I mention below for comparison purposes.)
At this point, you might be thinking, "Doesn't IBM offer something like this?" Of course it does! IBM is the leader in infrastructure reporting, monitoring and management software. Last October, [IBM unveiled IBM Systems Director VMcontrol] software. Not only does IBM Systems Director VMcontrol provide similar support for your VMware environment, it also manages Microsoft Hyper-V and Xen deployments, PowerVM on POWER-based serves, and even z/VM guest images on the System z mainframes. Combined with the rest of the IBM Systems Director, you can manage all of your physical and virtual servers with a single tool from a single pane of glass. How cool is that?
I would like to think Doug Hazelman, Senior Director of Product Strategy at Veeam, for organizing this awesome blogging contest. If you liked this blog post, click here to [vote for me] to get counted for this contest.
It seems everyone is talking about stacks, appliances and clouds.
On StorageBod, fellow blogger Martin Glassborow has a post titled [Pancakes!] He feels that everyone from Hitachi to Oracle is turning into the IT equivalent of the International House of Pancakes [IHOP] offering integrated stacks of software, servers and storage.
Cisco introduced its "Unified Computing System" about a year ago, [reinventing the datacenter with an all-Ethernet approach]. Cisco does not offer its own hypervisor software nor storage, so there are two choices. First, Cisco has entered a joint venture, called Acadia, with VMware and EMC, to form the Virtual Computing Environment (VCE) coalition. The resulting stack was named Vblock, which one blogger had hyphenated as Vb-lock to raise awareness to the proprietary vendor lock-in nature of this stack. Second, Cisco, VMware and NetApp had a similar set of [Barney press releases] to announce a viable storage alternative to those not married to EMC.
"Only when it makes sense. Oracle/Sun has the better argument: when you know exactly what you want from your database, we’ll sell you an integrated appliance that will do exactly that. And it’s fine if you roll your own.
But those are industry-wide issues. There are UCS/VCE specific issue as well:
Cost. All the integration work among 3 different companies costs money. They aren’t replacing existing costs – they are adding costs. Without, in theory, charging more.
Lock-in. UCS/Vblock is, effectively, a mainframe with a network backplane.
Barriers to entry. Are there any? Cisco flagged hypervisor bypass and large memory support as unique value-add – and neither seems any more than a medium-term advantage.
BOT? Build, Operate, Transfer. In theory Vblocks are easier and faster to install and manage. But customers are asking that Acadia BOT their new Vblocks. The customer benefit over current integrator practice? Lower BOT costs? Or?
Price. The 3 most expensive IT vendors banding together?
Longevity. Industry “partnerships” don’t have a good record of long-term success. Each of these companies has its own competitive stresses and financial imperatives, and while the stars may be aligned today, where will they be in 3 years? Unless Cisco is piloting an eventual takeover."
Fellow blogger Bob Sutor (IBM) has an excellent post titled
[Appliances and Linux]. Here is an excerpt:
"In your kitchen you have special appliances that, presumably, do individual things well. Your refrigerator keeps things cold, your oven makes them hot, and your blender purees and liquifies them. There is room in a kitchen for each of these. They work individually but when you are making a meal they each have a role to play in creating the whole.
You could go out and buy the metal, glass, wires, electrical gadgets, and so on that you would need to make each appliance but it is is faster, cheaper, and undoubtably safer to buy them already manufactured. For each device you have a choice of providers and you can pay more for additional features and quality.
In the IT world it is far more common to buy the bits and pieces that make up a final solution. That is, you might separately order the hardware components, the operating system, and the applications, and then have someone put them all together for you. If you have an existing configuration you might add more blades or more storage devices.
You don’t have to do this, however, in every situation. Just from a hardware perspective, you can buy a ready-made machine just waiting for the on switch to be flicked and the software installed. Conversely, you might get a pre-made software image with operating system and applications in place, ready to be provisioned to your choice of hardware. We can get even fancier in that the software image might be deployable onto a virtual machine and so be a ready made solution runnable on a cloud.
Thus in the IT world we can talk about hardware-only appliances, software-only appliances (often called virtual software appliances), and complete hardware and software combinations. The last is most comparable to that refrigerator or oven in your kitchen."
If your company was a restaurant, how many employees would you have on hand to produce your own electricity from gas generators, pump your own water from a well, and assemble your own toasters and blenders from wires and motors? I think this is why companies are re-thinking the way they do their own IT.
Rather than business-as-usual, perhaps a mix of pre-configured appliances, consisting of software, server and storage stacked to meet a specific workload, connected to public cloud utility companies, might be the better approach. By 2013, some analysts feel that as many as 20 percent of companies might not even have a traditional IT datacenter anymore.
“By employing techniques like virtualization, automated management, and utility-billing models, IT managers can evolve the internal datacenter into a ‘private cloud’ that offers many of the performance, scalability, and cost-saving benefits associated with public clouds. Microsoft provides the foundation for private clouds with infrastructure solutions to match a range of customer sizes, needs and geographies.
The public cloud:
“Cloud computing is expanding the traditional web-hosting model to a point where enterprises are able to off-load commodity applications to third-party service providers (hosters) and, in the near future, the Microsoft Azure Services Platform. Using Microsoft infrastructure software and Web-based applications, the public cloud allows companies to move applications between private and public clouds.”
Finally, I saw this from fellow blogger, Barry Burke(EMC), aka the Storage Anarchist, titled [a walk through the clouds] which is really a two-part post.
The first part describes a possible future for EMC customers written by EMC employee David Meiri, envisioning a wonderful world with "No more Metas, Hypers, BIN Files...."
The vision is a pleasant one, and not far from reality. While EMC prefers to use the term "private cloud" to refer to both on-premises and off-premises-but-only-your-employees-can-VPN-to-it-and-your-IT-staff-still-manages-it flavors, the overall vision is available today from a variety of Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS) providers.
A good analogy for "private cloud" might be a corporate "intranet" that is accessible only within the company's firewall. This allowed internal websites where information to be disseminated to employees could be posted, using standard HTML and standard web browsers that are already deployed on most PCs and workstations. Web pages running on an intranet can easily be moved to an external-facing website without too much rework or trouble.
The second part has Barry claiming that EMC has made progress towards a "Virtual Storage Server" that might be announced at next month's EMC World conference.
When people hear "Storage Virtualization" most immediately think of the two market leaders, IBM SAN Volume Controller and Hitachi Data Systems (HDS) Universal Storage Platform (USP) products. Those with a tape bent might throw in IBM's TS7000 virtual tape libraries or Oracle/Sun's Virtual Storage Manager (VSM). And those focused on software-only solutions might recall Symantec's Veritas Volume Manager (VxVM), DataCore's SANsymphony, or FalconStor's IPStor products.
But what about EMC's failed attempt at storage virtualization, the Invista? After five years of failing to deliver value, EMC has so far only publicised ONE customer reference account, and I estimate that perhaps only a few dozen actual customers are still running on this platform. Compare that to IBM selling tens of thousands of SAN Volume Controllers, and HDS selling thousands of their various USP-V and USP-VM products, and you quickly realize that EMC has a lot of catching up to do. EMC's first delivered Invista about 18 months after IBM SAN Volume Controller, similar to their introduction of Atmos being 18 months after our Scale-Out File Services (SoFS) and their latest CLARiiON-based V-Max coming out 18 months after IBM's XIV storage system.
So what will EMC's Invista follow-on "Virtual Storage Server" product look like? No idea. It might be another five years before you actually hear about a customer using it. But why wait for EMC to get their act together?
IBM offers solutions TODAY that can make life as easy as envisioned here. IBM offers integrated systems sold as ready-to-use appliances, customized "stacks" that can be built to handle particular workloads, residing on-premises or hosted at an IBM facility, and public cloud "as-a-service" offerings on the IBM Cloud.
IBM had over a dozen storage-related announcements this week. This is my third and final part in my series to provide a quick overview of the announcements.
IBM Tivoli® Storage Manager v6.3
IBM Tivoli Storage Manager is market-leading software that provides not just backup, but also HSM and archive capabilities across a wide variety of operating systems. Originally developed in the IBM Almaden Research Center, it then moved about 15 years ago to Tucson to become a commercial product.
The new TSM v6.3 introduces site-to-site hot-standby disaster recovery feature that replicates the TSM meta data and data for fast recovery. The maximum number of objects supported has doubled to four billion. Reporting has been enhanced using technologies borrowed from IBM Cognos. Lastly, a feature on Tivoli Storage Productivity Center has been carried forward to deploy and update agents on the various clients.
IBM Tivoli Storage FlashCopy Manager coordinates application-aware backups through the use of point-in-time copy services such as FlashCopy or Snapshot on various IBM and non-IBM disk systems. The versions can remain on disk, or optionally processed by Tivoli Storage Manager to move them to external storage such as tape for added protection.
There will always be a spot in my heart for this product, as the method to use FlashCopy for application-aware backups on the mainframe was my 19th patent, and subsequently delivered as a series of enhancements to DFSMS over the past decade on the z/OS operating system. It is good to see this innovation has "jumped over" to distributed systems.
The new FlashCopy Manager v3.1 adds support for HP-UX and VMware, expands support for IBM DB2 and Oraqcle databases, and introduces an interface for custom business applications.
IBM Tivoli Storage Manager for Virtual Environments v6.3
TSM for VE is a new addition to the TSM family, focused on being able to coordinate hypervisor-aware data protection. Initially it supports VMware, but IBM has plans to support a variety of other server virtualization hypervisors as well, as over 40 percent of companies run two or more hypervisors in their data center.
The new TSM for VE v6.3 adds a VMware vCenter plug-in, and support for hardware-based disk snapshots.
IBM Tivoli Storage Productivity Center v4.2.2
A long time ago, I was the chief architect IBM Tivoli Storage Productivity Center v1, now we are already up to v4.2.2 release!
IBM has added enhanced reporting based on IBM Cognos technology, including storage tiering analysis reports (STAR). Few companies keep all of their storage tiers in a single disk system. Rather, they have different boxes, and often from different vendors. IBM's Productivity Center can report on both IBM and non-IBM disk systems. New this release is support for the internal disks of the Storwize V7000 midrange disk system.
Productivity Center's "SAN Planner" has been enhanced to consider XIV replication criteria. This SAN Planner helps clients decide where to carve LUNs, and to make sure they pick the right place given all of the criteria such as remote copy replications.
Last year, we introduced Productivity Center for Disk Midrange Edition (MRE) which to offer lower price when you are only managing midrange disk systems DS5000, DS3000, Storwize V7000 and SVC managing these. This was so successful, that we now have TPC Select, which is basically Productivity Center Standard Edition (SE) for these midrange disk systems.
Whew! I have already heard from some of my readers to slow down, that this is too much information to deal with all at once. IBM has tried everything from having just a few announcements nearly every Tuesday, to having huge launches every two to three years, and settled in the middle with announcements about four to five times per year.
This week, I am in Taipei, teaching Top Gun class. There was concern that another typhoon would hit the island of Taiwan later this week, but it looks like it is now headed for Hong Kong instead.
Elsewhere in the world, there are several events going on next week, so I thought I would bring them to your attention.
ECTY - South Africa
Next week, Jerry Kluck, IBM Global Sales Executive for Storage Optimization and Integration Services, will be the keynote speaker at "Edge Comes to You" (ECTY) conference in South Africa. This is a one-day event, similar to the [ECTY event in Moscow, Russia] that I spoke at last June.
Here is the schedule for South Africa next week:
Monday, August 20, 2012 - Johannesburg
Wednesday, August 22, 2012 - Cape Town
(I have been to both Jo'burg and Cape Town back in 1994. A month after Apartheid had just ended, I was part of a small group of IBMers sent to re-establish IBM's business operations there. I would have liked to have attended the events next week, not just to hear Jerry speak, but also to see how much the country has changed over the past 18 years, but I could not get a work permit in time.)
If you are interested in attending either of these next week, contact your local IBM Business Partner or sales rep to attend.
Forrester's Total Economic Impact Study of Virtualized Storage
Virtualized storage can help organizations stretch their storage investment dollar and storage administration and management resources. Jon Erickson from Forrester Research will review the latest findings from IBM SAN Volume Control (SVC) users studied as part of the recently completed Forrester Total Economic Impact Study of IBM System Storage SAN Volume Controller.
Date: Tuesday, August 21, 2012
Time: 10:00 AM PDT / 1:00 PM EDT
Duration: 60 minutes
Among the findings, users were able to:
Avoid the capital cost of additional storage
Increase IT productivity
Provide greater end user data availability
The second presenter is Chris Saul, IBM Storage Virtualization Manager, who will explain how SVC can manage heterogeneous disk from a single point of control, autonomously manage tiered disk storage and can store up to five times as much data on your existing disk using IBM Real-time Compression.
Not all virtualization solutions are created equal! That's true for storage virtualization, like the SAN Volume Controller mentioned above, and it's true for server virtualization as well.
This webcast discusses the real-world impact on businesses that deploy IBM's PowerVM®
virtualization technology as compared to those using Oracle® VM for SPARC (OVM SPARC), Microsoft® Hyper-V, VMware® vSphere or other competing products.
Date: Wednesday, August 22, 2012
Time: 10:00 AM PDT / 1:00 PM EDT
Duration: 60 minutes
This webcast will include findings from a [Solitaire Interglobal] study of over 61,000 customer sites on the value of virtualization from a business perspective and how IBM's PowerVM provides real business value.
Other key discussion points that will be covered during this webcast include:
Behavioral characteristics of server virtualization technologies that were examined and analyzed from survey participant's environments
How IT colleagues were able to obtain a faster time-to-market for business initiatives when using IBM PowerVM
Why the learning curve time for PowerVM is as much as 2.58 times faster than for other offerings
Why VM reboot comparisons for PowerVM vs competitive platforms resulted in downtime of 5.5 times less than with other options
A TCO reduction of up to 71.4% for PowerVM compared to alternative options
This webcast will also feature an in-depth discussion on the IBM PowerVM solution from an IBM product expert who will share the unique virtualization features available when PowerVM is utilized within the IBM Power Systems™ environment.
It's Tuesday again, and that means one thing.... IBM Announcements! On the heels of [last week's announcements], IBM announced some additional products of interest to storage administrators.
IBM Information Archive
Back in 2008, IBM [unveiled the Information Archive]. This storage solution provides automated policy-based tiering between disk and tape, with non-erasable non-rewriteable enforcement to protect against unethical tampering of data. The initial release supported [both files and object storage], with support for different collections, each with its own set of policies for management. However, it only supported NFS initially for the file protocol. Today, IBM announces the addition of CIFS protocol support, which will be especially helpful in healthcare and life sciences, as much of the medical equipment is designed for CIFS protocol storage.
Also, Information Archive will now provide a full index and search feature capability to help with e-Discovery. Searches and retrievals can be done in the background without disrupting applications or the archiving operations.
IBM Tivoli Storage Manager for Virtual Environments V6.2 extends capabilities that currently exist in IBM Tivoli Storage Manager. TSM backup/archive clients run fine on guest operating systems, but now this new extension improves backup for VMware environments. TSM provides incremental block-level backups utilizing VMware's vStorage APIs for Data Protection and Changed Block Tracking features.
To minimize impact to the VMware host, TSM for VE make use of non-disruptive snapshots and offload the backup processing to a vStorage backup server. This supports file-level recovery, volume-level recovery, and full VM recovery. Of course, since it is based on TSM v6, you get advanced storage efficiency features such as compression and deduplication to minimize consumption of disk storage pools.
IBM Tivoli Monitor has been extended to support virtual servers, including VMware, Linux KVM, and Citrix XenServer. This can help with capacity planning, performance monitoring, and availability. Tivoli Monitor will help you understand the relationships between physical and virtual resources to help isolate problems to the correct resource, reducing the time it takes for debug issues between servers and storage. See the
Next week is [IBM Pulse2011 Conference] in Las Vegas, February 27 to March 2. Sorry, I don't plan to be there this year. It is looking to be a great conference, with fellow inventor Dean Kamen as the keynote speaker. For a blast from the past, read my blog posts from Pulse2008 [Main Tent sessions] and [Breakout sessions].
They say "Great Minds think alike" and that imitation is "the sincerest form of flattery." Both of these quotes came to mind when I read fellow blogger Chuck Hollis' (EMC) excellent April 7th blog post [The 10 Big Ideas That Are Shaping IT Infrastructure Today]. Not surprisingly, some of his thoughts are similar to those I had presented two weeks ago in my March 22nd post [Cloud Computing for Accountants]. Here are two charts that caught my eye:
On page 13 of my deck, I had an old black and white photo of telephone operators, as part of a section on the history of selecting "cloud" as the iconic graphic to represent all networks. Chuck has this same graphic on his chart titled "#1 The Industrialization of IT Infrastructure".
Looks like Chuck and I use the same "stock photo" search facility!
On page 45 on my deck, I had a list of major "arms dealers" that deliver the hardware and software components needed to build Cloud Computing. Chuck has a similar chart, titled "#2 The Consolidation of the IT Industry", but with some interesting differences.
Let's look at some of the key differences:
The left-to-right order is slightly different. I chose a 1-2-4-2-1 symmetrical pattern purely on aesthetic reasons. My presentation was to a bunch of accountants, and so I was trying not to make it sound like an "Infomercial" for IBM products and offerings. My sequence is roughly chronological, in that Oracle announced its intention to acquire Sun, then Cisco, VMware and EMC announced their VCE coalition, followed closely by Cisco, VMware and NetApp announcing they work together well also, followed by [HP extended alliance with Microsoft] on Jan 13, 2010. As the IT marketplace is maturing, more and more customers are looking for an IBM-like one-stop shopping experience, and certainly various "mini-mall" alliances have formed to try to compete in this space.
I had HP and Microsoft in the same column, referring only to the above-mentioned January announcement. HP is all about private cloud hardware infrastructures, but Microsoft is all about "three screens and the public cloud", so not sure how well this alliance will work out from a Cloud Computing perspective. This was not to imply that the other stacks don't work well with Microsoft software. They all do. Perhaps to avoid that controversy, Chuck chose to highlight HP's acquisition of EDS services instead.
I used the vendor logos in their actual colors. Notice that the colors black, blue and red occur most often. These happen to be the three most popular ballpoint pen ink colors found on the very same paper documents these computer companies are trying to eliminate. Paper-less office, anyone? Chuck chose instead to colorize each stack with his own color scheme. While blue for IBM and orange for Sun Microsystems make some sense, it is not clear if he chose green for Cisco/VMware/EMC for any particular reason. Perhaps he was trying to subtly imply that the VCE stack is more energy efficient? Or maybe the green refers to money to indicate that the VCE stack is the most expensive? Either way, I would pit IBM's server/storage/software stack up against anything of comparable price from these other stacks in any energy efficiency bake-off.
What about the Cisco/VMware/NetApp combination? All three got together to assure customers this was a viable combination. IBM is the number one reseller of VMware, and VMware runs great with IBM's N series NAS storage, so I do not dispute Cisco's motivation here. It makes sense for Cisco to two-time EMC in this manner. Why should Cisco limit itself to a single storage supplier? Et tu VMware? Having VMware chose NetApp over its parent company EMC was a bit of a shock. No surprise that Chuck left NetApp out of his chart.
No love for Dell? I give Dell credit for their work with Virtual Desktop Images (VDI), and for embracing Ubuntu Linux for their servers. Dell's acquisitions of EqualLogic iSCSI-based disk systems and Perot Systems for services are also worth noting. Dell used to resell some of EMC's gear, but perhaps that relationship continues to fade away, as I [predicted back in 2007]. Chuck's decision to leave Dell off his chart speaks volumes to where this relationship stands, and where it is going.
Perhaps we are all in just one big ["echo chamber"], as we are all coming up with similar observations, talking to similar customers, and reviewing similar market analyst reports. I am glad, at least this time, that Chuck and I for the most part agree where the marketplace is going. We live in interesting times!
Have you ever noticed that sometimes two movies come out that seem eerily similar to each other, released by different studios within months or weeks of each other? My sister used to review film scripts for a living, she would read ten of them and have to pick her top three favorites, and tells me that scripts for nearly identical concepts came all the time. Here are a few of my favorite examples:
1994: [Wyatt Earp] and [Tombstone] were Westerns recounting the famed gunfight at the O.K. Corral. Tombstone, Arizona is near Tucson, and the gunfight is recreated fairly often for tourists.
1998: [Armageddon] and [Deep Impact] were a pair of disaster movies dealing with a large rock heading to destroy all life on earth. I was in Mazatlan, Mexico to see the latter, dubbed in Spanish as "Impacto Profundo".
1998: [A Bug's Life] and [Antz] were computer-animated tales of the struggle of one individual ant in an ant colony.
2000: [Mission to Mars] and [Red Planet] were sci-fi pics exploring what a manned mission to our neighboring planet might entail.
This is different than copy-cat movies that are re-made or re-imagined many years later based on the previous successes of an original. Ever since my blog post [VPLEX: EMC's Latest Wheel is Round] in 2010 comparing EMC's copy-cat product that came our seven years after IBM's SAN Volume Controller (SVC), I've noticed EMC doesn't talk about VPLEX that much anymore.
This week, IBM announced [XIV Gen3 Solid-State Drive support] and our friends over at EMC announced [VFCache SSD-based PCIe cards]. Neither of these should be a surprise to anyone who follows the IT industry, as IBM had announced its XIV Gen3 as "SSD-Ready" last year specifically for this purpose, and EMC has been touting its "Project Lightning" since last May.
Fellow blogger Chuck Hollis from EMC has a blog post [VFCache means Very Fast Cache indeed] that provides additional detail. Chuck claims the VFCache is faster than popular [Fusion-IO PCIe cards] available for IBM servers. I haven't seen the performance spec sheets, but typically SSD is four to five times slower than the DRAM cache used in the XIV Gen3. The VFCache's SSD is probably similar in performance to the SSD supported in the IBM XIV Gen3, DS8000, DS5000, SVC, N series, and Storwize V7000 disk systems.
Nonetheless, I've been asked my opinions on the comparison between these two announcements, as they both deal with improving application performance through the use of Solid-State Drives as an added layer of read cache.
(FTC Disclosure: I am both a full-time employee and stockholder of the IBM Corporation. The U.S. Federal Trade Commission may consider this blog post as a paid celebrity endorsement of IBM servers and storage systems. This blog post is based on my interpretation and opinions of publicly-available information, as I have no hands-on access to any of these third-party PCIe cards. I have no financial interest in EMC, Fusion-IO, Texas Memory Systems, or any other third party vendor of PCIe cards designed to fit inside IBM servers, and I have not been paid by anyone to mention their name, brands or products on this blog post.)
The solutions are different in that IBM XIV Gen3 the SSD is "storage-side" in the external storage device, and EMC VFCache is "server-side" as a PCI Express [PCIe] card. Aside from that, both implement SSD as an additional read cache layer in front of spinning disk to boost performance. Neither is an industry first, as IBM has offered server-side SSD since 2007, and IBM and EMC have offered storage-side SSD in many of their other external storage devices. The use of SSD as read cache has already been available in IBM N series using [Performance Accelerator Module (PAM)] cards.
IBM has offered cooperative caching synergy between its servers and its storage arrays for some time now. The predecessor to today's POWER7-based were the iSeries i5 servers that used PCI-X IOP cards with cache to connect i5/OS applications to IBM's external disk and tape systems. To compete in this space, EMC created their own PCI-X cards to attach their own disk systems. In 2006, IBM did the right thing for our clients and fostered competition by entering in a [Landmark agreement] with EMC to [license the i5 interfaces]. Today, VIOS on IBM POWER systems allows a much broader choice of disk options for IBM i clients, including the IBM SVC, Storwize V7000 and XIV storage systems.
Can a little SSD really help performance? Yes! An IBM client running a [DB2 Universal Database] cluster across eight System x servers was able to replace an 800-drive EMC Symmetrix by putting eight SSD Fusion-IO cards in each server, for a total of 64 Solid-State drives, saving money and improving performance. DB2 has the Data Partitioning Feature that has multi-system DB2 configurations using a Grid-like architecture similar to how XIV is designed. Most IBM System x and BladeCenter servers support internal SSD storage options, and many offer PCIe slots for third-party SSD cards. Sadly, you can't do this with a VFCache card, since you can have only one VFCache card in each server, the data is unprotected, and only for ephemeral data like transaction logs or other temporary data. With multiple Fusion-IO cards in an IBM server, you can configure a RAID rank across the SSD, and use it for persistent storage like DB2 databases.
Here then is my side-by-side comparison:
IBM XIV Gen3 SSD Caching
Selected x86-based models of Cisco UCS, Dell PowerEdge, HP ProLiant DL, and IBM xSeries and System x servers
All of these, plus any other blade or rack-optimized server currently supported by XIV Gen3, including Oracle SPARC, HP Titanium, IBM POWER systems, and even IBM System z mainframes running Linux
Operating System support
Linux RHEL 5.6 and 5.7, VMware vSphere 4.1 and 5.0, and Windows 2008 x64 and R2.
All of these, plus all the other operating systems supported by XIV Gen3, including AIX, IBM i, Solaris, HP-UX, and Mac OS X
FCP and iSCSI
Vendor-supplied driver required on the server
Yes, the VFCache driver must be installed to use this feature.
No, IBM XIV Gen3 uses native OS-based multi-pathing drivers.
External disk storage systems required
None, it appears the VFCache has no direct interaction with the back-end disk array, so in theory the benefits are the same whether you use this VFCache card in front of EMC storage or IBM storage
XIV Gen3 is required, as the SSD slots are not available on older models of IBM XIV.
Shared disk support
No, VFCache has to be disabled and removed for vMotion to take place.
Yes! XIV Gen3 SSD caching shared disk supports VMware vMotion and Live Partition Mobility.
Support for multiple servers
An advantage of the XIV Gen3 SSD caching approach is that the cache can be dynamically allocated to the busiest data from any server or servers.
Support for active/active server clusters
Aware of changes made to back-end disk
No, it appears the VFCache has no direct interaction with the back-end disk array, so any changes to the data on the box itself are not communicated back to the VFCache card itself to invalidate the cache contents.
None identified. However, VFCache only caches blocks 64KB or smaller, so any sequential processing with larger blocks will bypass the VFCache.
Yes! XIV algorithms detect sequential access and avoid polluting the SSD with these blocks of data.
Number of SSD supported
One, which seems odd as IBM supports multiple Fusion-IO cards for its servers. However, this is not really a single point of failure (SPOF) as an application experiencing a VFCache failure merely drops down to external disk array speed, no data is lost since it is only read cache.
6 to 15 (one per XIV module) for high availability.
Pin data in SSD cache
Yes, using split-card mode, you can designate a portion of the 300GB to serve as Direct-attached storage (DAS). All data written to the DAS portion will be kept in SSD. However, since only one card is supported per server and the data is unprotected, this should only be used for ephemeral data like logs and temp files.
No, there is no option to designate an XIV Gen3 volume to be SSD-only. Consider using Fusion-IO PCIe card as a DAS alternative, or another IBM storage system for that requirement.
Pre-sales Estimating tools
Yes! CDF and Disk Magic tools are available to help cost-justify the purchase of SSD based on workload performance analysis.
IBM has the advantage that it designs and manufactures both servers and storage, and can design optimal solutions for our clients in that regard.
If you store your VMware bits on external SAN or NAS-based disk storage systems, this post is for you. The subject of the post, VM Volumes, is a potential storage management game changer!
Fellow blogger Stephen Foskett mentioned VM Volumes in his [Introducing VMware vSphere Storage Features] presentation at IBM Edge 2012 conference. His session on VMware's storage features included VMware APIs for Array Integration (VAAI), VMware Array Storage Awareness (VASA), vCenter plug-ins, and a new concept he called "vVol", now more formally known as VM Volumes. This post provides a follow-up to this, describing the VM Volumes concepts, architecture, and value proposition.
"VM Volumes" is a future architecture that VMware is developing in collaboration with IBM and other major storage system vendors. So far, very little information about VM Volumes has been released. At VMworld 2012 Barcelona, VMware highlights VM Volumes for the first time and IBM demonstrates VM Volumes with the IBM XIV Storage System (more about this demo below). VM Volumes is worth your attention -- when it becomes generally available, everyone using storage arrays will have to reconsider their storage management practices in a VMware environment -- no exaggeration!
But enough drama. What is this all about?
(Note: for the sake of clarity, this post refers to block storage only. However, the VM Volumes feature applies to NAS systems as well. Special thanks to Yossi Siles and the XIV development team for their help on this post!)
The VM Volumes concept is simple: VM disks are mapped directly to special volumes on a storage array system, as opposed to storing VMDK files on a vSphere datastore.
The following images illustrate the differences between the two storage management paradigms.
You may still be asking yourself: bottom line, how will I benefit from VM Volumes?
Well, take a VM snapshot for example. With VM Volumes, vSphere can simply offload the operation by invoking a hardware snapshot of the hardware volume. This has significant implications:
VM-Granularity: Only the right VMs are copied (with datastores, backing up or cloning individual-VM portions of hardware snapshot of a datastore would require more complex configuration, tools and work)
Hardware Offload: No ESXi server resources are consumed
XIV advantage: With XIV, snapshots consume no space upfront and are completed instantly.
Here's the first takeaway: With VM Volumes, advanced storage services (which cost a lot when you buy a storage array), will become available at an individual VM level. In a cloud world, this means that applications can be provisioned easily with advanced storage services, such as snapshots and mirroring.
Now, let's take a closer look at another relevant scenario where VM Volumes will make a lot of difference - provisioning an application with special mirroring requirements:
VM Volumes case: The application is ordered via the private cloud portal. The requestor checks a box requesting an asynchronous mirror. He changes the default RPO for his needs. When the request is submitted, the process wraps up automatically: Volumes are created on one of the storage arrays, configured with a mirror and RPO exactly as specified. A few minutes later, the requestor receives an automatic mail pointing to the application virtual machine.
Datastores case #1: As may be expected, a datastore that is mirrored with the special RPO does not exist. As a result, the automated workflow sets a pending status on the request, creates an urgent ticket to a VMware administrator and aborts. When the VMware admin handles that ticket, she re-assigns the ticket to the storage administrator, asking for a new volume which is mirrored with the special RPO, and mapped to the right ESXi cluster. The next day, the volume is created; the ticket is re-assigned to the storage admin, with the new LUN being pointed to. The VMware administrator follows and creates the datastore on top of it. Since the automated workflow was aborted, the admin re-assigns the ticket to the cloud administrator, who sometime later completes the application provisioning manually.
Datastores case #2: Luckily for the requestor, a datastore that is mirrored with the special RPO does exist. However, that particular datastore is consuming space from a high performance XIV Gen3 system with SSD caching, while the application does not require that level of performance, so the workflow requires a storage administrator approval. The approval is given to save time, but the storage administrator opens a ticket for himself to create a new volume on another array, as well as a follow-up ticket for the VMware admin to create a new datastore using the new volume and migrate the application to the other datastore. In this case, provisioning was relatively rapid, but required manual follow up, involving the two administrators.
Here's the second takeaway: With VM Volumes, management is simplified, and end-to-end automation is much more applicable. The reason is that there are no datastores. Datastores physically group VMs that may otherwise be totally unrelated, and require close coordination between storage and VMware administrators.
Now, the above mainly focuses on the VMware or cloud administrator perspective. How does VM Volumes impact storage management?
VM's are the new hosts: Today, storage administrators have visibility of physical hosts in their management environment. In a non-virtualized environment, this visibility is very helpful. The storage administrator knows exactly which applications in a data center are storage-provisioned or affected by storage management operations because the applications are running on well-known hosts. However, in virtualized environments the association of an application to a physical host is temporary. To keep at least the same level of visibility as in physical environments, VMs should become part of the storage management environment, like hosts. Hosts are still interesting, for example to manage physical storage mapping, but without VM visibility, storage administrators will know less about their operation than they are used to, or need to. VM Volumes enables such visibility, because volumes are provided to individual VMs. The XIV VM Volumes demonstration at VMworld Barcelona, although experimental, shows a view of VM volumes, in XIV's management GUI.
Here's a screenshot:
That's not all!
Storage Profiles and Storage Containers: A Storage Profile is a vSphere specification of a set of storage services. A storage profile can include properties like thin or thick provisioning, mirroring definition, snapshot policy, minimum IOPS, etc.
Storage administrators define a portfolio of supported storage services, maintained as a set of storage profiles, and published (via VASA integration) to vSphere.
VMware or cloud administrators define the required storage profiles for specific applications
VMware and storage administrators need to coordinate the typical storage requirements and the automatically-available storage services. When a request to provision an application is made, the associated storage profiles are matched against the published set of available storage profiles. The matching published profiles will be used to create volumes, which will be bound to the application VMs. All that will happen automatically.
Note that when a VM is created today, a datastore must be specified. With VM Volumes, a new management entity called Storage Container (also known as Capacity Pool) replaces the use of datastore as a management object. Each Storage Container exposes a subset of the available storage profiles, as appropriate. The storage container also has a capacity quota.
Here are some more takeaways:
New way to interface vSphere and storage management: Storage administrators structure and publish storage services to vSphere via storage profiles and storage containers.
Automated provisioning, out of the box: The provisioning process automatically matches application-required storage profiles against storage profiles available from the specified storage containers. There is no need to build custom scripts and custom processes to automate storage provisioning to applications
The XIV advantage:
XIV services are very simple to define and publish. The typical number of available storage profiles would be low. It would also be easy to define application storage profiles.
XIV provides consistent high performance, up to very high capacity utilization levels, without any maintenance. As a result, automated provisioning (which inherently implies less human attention) will not create an elevated risk of reduced performance.
Note: A storage vendor VASA provider is required to support VM Volumes, storage profiles, storage containers and automated provisioning. The IBM Storage VASA provider runs as a standalone service that needs to be deployed on a server.
To summarize the VM Volumes value proposition:
Streamline cloud operation by providing storage services at VM and application level, enabling end-to-end provisioning automation, and unifying VMware and storage administration around volumes and VMs.
Increase storage array ROI, improve vSphere scalability and response time, and reduce cloud provisioning lag, by offloading VM-level provisioning, failover, backup, storage migration, storage space recycling, monitoring, and more, to the storage array, using advanced storage operations such as mirroring and snapshots.
Simplify the adoption of VM Volumes using XIV, with smaller and simpler sets of storage profiles. Apply XIV's supreme fast cloning to individual VMs, and keep automation risks at bay with XIV's consistent high performance.
Until you can get your hands on a VM Volumes-capable environment, the VMware and IBM developer groups will be collaborating and working hard to realize this game-changing feature. The above information is definitely expected to trigger your questions or comments, and our development teams are eager to learn from them and respond. Enter your comments below, and I will try to answer them, and help shape the next post on this subject. There's much more to be told.
Wrapping up my seven-city romp through Australia and New Zealand, the final city was Canberra, which is the capital of Australia. As with Wellington, this meant many of the clients in the audience work in government agencies.
I had not taken any photos of Anna Wells, IBM Storage Sales Leader for ANZ, but I was able to find this caricature of her on a poster from an award she won within IBM.
I also did not have a picture of Robert, my videographer for this trip, who was always behind the camera himself.
The event went smoothly, just like the rest of them. Anna presented IBM's storage strategy and highlighted specific IBM storage solutions.
I had several emails asking if this event was called "Storage Optimisation Breakfast" because it was held in the mornings, or did we actually serve food at these events. The answer is we actually served food, a variation of the [Full English Breakfast], and most of the attendees gobbled it down while Anna spoke.
The fare was quite similar across all seven locations: scrambled or poached eggs, on toast or english muffin, ham/bacon/sausages, potatoes or mushrooms, and half of a baked tomato with bits of something toasted on top.
One morning, for a change, I decided instead to have a bowl of Weet-Bix cereal. Tasted like cardboard. I learned my lesson.
Next, we had Will Quodling, Manager of Infrastructure Operations, at Australia's Department of Innovation, Industry, Science and Research. The Department of Innovation, Industry, Science and Research consists of 3200 staff that strive to encourage the sustainable growth of Australian industries. The Department is committed to developing policies and delivering programs to provide lasting economic benefits ensuring Australia's competitive future, undertakes analysis, and provides services and advice to the business, science and research community. American President, Barack Obama, visited Australia and was interested in adopting a similar concept for the United States.
The department was looking to replace their existing IBM System Storage DS4800 disk systems with something more energy efficient. They selected IBM XIV storage system, with an expected savings of 10kW per year. They are able to run 800 VMware images and 150 VDI workstations using storage on one XIV, replicate the data to a second XIV at a remote location, and have a third XIV for their Web serving environment. They tested out both single drive and full module failures, and experienced better-than-expected rebuild times, with no impact to users, and no impact to performance.
After 17 days without a functioning government, Australia finally selected a prime minister. Her name is Julia Gillard, shown here. She won in part by promising to build a National Broadband Network (NBN) for the entire country, including the rural areas.
[Canberra] is an interesting town, a fully planned community designed in 1913 by Chicago's husband-and-wife architect team of Walter Burley Griffin and Marion Mahony Griffin. The location was selected as being half-way compromise between Australia's two largest cities, Sydney and Melbourne.
I would like to thank all the wonderful people in both Australia and New Zealand for making this a successful trip!