Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
This week, I am in beautiful Sao Paulo, Brazil, teaching Top Gun class to IBM Business Partners and sales reps. Traditionally, we have "Tape Thursday" where we focus on our tape systems, from tape drives, to physical and virtual tape libraries. IBM is the number #1 tape vendor, and has been for the past eight years.
(The alliteration doesn't translate well here in Brazil. The Portuguese word for tape is "fita", and Thursday here is "quinta-feira", but "fita-quinta-feira" just doesn't have the same ring to it.)
In the class, we discussed how to handle common misperceptions and myths about tape. Here are a few examples:
Myth 1: Tape processing is manually intensive
In my July 2007 blog post [Times a Million], I coined the phrase "Laptop Mentality" to describe the problem most people have dealing with data center decisions. Many folks extend linearly their experiences using their PCs, workstations or laptops to apply to the data center, unable to comprehend large numbers or solutions that take advantage of the economies of scale.
For many, the only experience dealing with tape was manual. In the 1980s, we made "mix tapes" on little cassettes, and in the 1990s we recorded our favorite television shows on VHS tapes in the VCR. Today, we have playlists on flash or disk-based music players, and record TV shows on disk-based video recorders like Tivo. The conclusion is that tapes are manual, and disk are not.
Manual processing of tapes ended in 1987, with the introduction of a silo-like tape library from StorageTek. IBM quickly responded with its own IBM 3495 Tape Library Data Server in 1992. Today, clients have many tape automation choices, from the smallest IBM TS2900 Tape Autoloader that has one drive and nine cartridges, all the way to the largest IBM TS3500 multiple-library shuttle complex that can hold exabytes of data. These tape automation systems eliminate most of the manual handling of cartridges in day-to-day operations.
Myth 2: Tape media is less reliable than disk media
For any storage media to be unreliable is to return the wrong information that is different than what was originally stored. There are only two ways for this to happen: if you write a "zero" but read back a "one", or write a "one" and read a "zero". This is called a bit error. Every storage media has a "bit error rate" that is the average likelihood for some large amount of data written.
According to the latest [LTO Bit Error rates, 2012 March], today's tape expects only 1 bit error per 10E17 bits written (about 100 Petabytes). This is 10 times more reliable than Enterprise SAS disk (1 bit per 10E16), and 100 times more reliable than Enterprise-class SATA disk (1 bit per 10E15).
Tape is the media used in "black boxes" for airplanes. When an airplane crashes, the black box is retrieved and used to investigate the causes of the crash. In 1986, the Space Shuttle Challenger exploded 73 seconds after take-off. The tapes in the black box sat on the ocean floor for six weeks before being recovered. Amazingly, IBM was able to successfully restore [90 percent of the block data, and 100 percent of voice data].
Analysts are quite upset when they are quoted out of context, but in this case, Gartner never said anything closely similar to this. Nor did the other analysts that Curtis investigated for similar claims. What Garnter did say was that disk provides an attractive alternative storage media for backup which can increase the performance of the recovery process.
Back in the 1990s, Savur Rao and I developed a patent to help backup DB2 for z/OS by using the FlashCopy feature of IBM's high-end disk system. The software method to coordinate the FlashCopy snapshots with the database application and maintain multiple versions was implemented in the DFSMShsm component of DFSMS. A few years later, this was part of a set of patents IBM cross-licensed to Microsoft for them to implement a similar software for Windows called Data Protection Manager (DPM). IBM has since introduced its own version for distributed systems called IBM Tivoli FlashCopy Manager that runs not just on Windows, but also AIX, Linux, HP-UX and Solaris operating systems.
Curtis suspects the "71 percent" citation may have been propogated by an ambitious product manager of Microsoft's Data Protection Manager, back in 2006, perhaps to help drive up business to their new disk-based backup product. Certainly, Microsoft was not the only vendor to disparage tape in this manner.
A few years ago, an [EMC failure brought down the State of Virginia] due to not just a component failure it its production disk system, but then made it worse by failing to recover from the disk-based remote mirror copy. Fortunately, the data was able to be restored from tape over the next four days. If you wonder why nobody at EMC says "Tape is Dead" anymore, perhaps it is because tape saved their butts that week.
(FTC Disclosure: I work for IBM and this post can be considered a paid, celebrity endorsement for all of the IBM tape and software products mentioned on this post. I own shares of stock in both IBM and Google, and use Google's Gmail for my personal email, as well as many other Google services. While IBM, Google and Microsoft can be considered competitors to each other in some areas, IBM has working relationships with both companies on various projects. References in this post to other companies like EMC are merely to provide illustrative examples only, based on publicly available information. IBM is part of the Linear Tape Open (LTO) consortium.)
Myth 4: Vendors and Manufacturers are no longer investing in tape technology
IBM and others are still investing Research and Development (R&D) dollars to improve tape technology. What people don't realize is that much of the R&D spent on magnetic media can be applied across both disk and tape, such as IBM's development of the Giant Magnetoresistance read/write head, or [GMR] for short.
Most recently, IBM made another major advancement with tape with the introduction of the Linear Tape File Systems (LTFS). This allows greater portability to share data between users, and between companies, but treating tape cartridges much like USB memory sticks or pen drives. You can read more in my post [IBM and Fox win an Emmy for LTFS technology]!
Next month, IBM celebrates the 60th anniversary for tape. It is good to see that tape continues to be a vibrant part of the IT industry, and to IBM's storage business!
I saw this as an opportunity to promote the new IBM Tivoli Storage Manager v6.1 which offers a variety of new scalability features, and continues to provide excellent economies of scale for large deployments, in my post [IBM has scalable backup solutions].
"So does TSM scale? Sure! Just add more servers. But this is not an economy of scale. Nothing gets less expensive as the capacity grows. You get a more or less linear growth of costs that is directly correlated to the growth of primary storage capacity. (Technically, it costs will jump at regular and predictable intervals, by regular and predictable and equal amounts, as you add TSM servers to the infrastructure--but on average it is a direct linear growth. Assuming you are right sized right now, if you were to double your primary storage capacity, you would double the size of the TSM infrastructure, and double your associated costs.)"
I talked about inaccurate vendor FUD in my post [The murals in restaurants], and recently, I saw StorageBod's piece, [FUDdy Waters]. So what would "economies of scale" look like? Using Scott's own words:
Without Economies of Scale
"If it costs you $5 to backup a given amount of data, it probably costs you $50 to back up 10 times that amount of data, and $500 to back up 100 times that amount of data."
With Economies of Scalee
"If anybody can figure out how to get costs down to $40 for 10 times the amount of data, and $300 for 100 times the amount of data, they will have an irrefutable advantage over anybody that has not been able to leverage economies of scale."
So, let's do some simple examples. I'll focus on a backup solution just for employee workstations, each employee has 100GB of personal data to backup on their laptop or PC. We'll look at a one-person company, a ten-person company, and a hundred-person company.
Case 1: The one-person company
Here the sole owner needs a backup solution. Here are all the steps she might perform:
Spend hours of time evaluating different backup products available, and make sure her operating system, file system and applications are supported
Spend hours shopping for external media, this could be an external USB disk drive, optical DVD drive, or tape drive, and confirm it is supported by the selected backup software.
Purchase the backup software, external drive, and if optical or tape, blank media cartridges.
Spend time learning the product, purchase "Backup for Dummies" or similar book, and/or taking a training class.
Install and configure the software
Operate the software, or set it up to run automatically, and take the media offsite at the end of the day, and back each morning
Case 2: The ten-person company
I guess if each of the ten employees went off and performed all of the same steps as above, there would be no economies of scale.
Fortunately, co-workers are amazingly efficient in avoiding unnecessary work.
Rather than have all ten people evaluate backup solutions, have one person do it. If everyone runs the same or similar operating system, file systems and applications, this can be done about the same as the one-person case.
Ditto on the storage media. Why should 10 people go off and evaluate their own storage media. One person can do it for all ten people in about the same time as it takes for one person.
Purchasing the software and hardware. Ok, here is where some costs may be linear, depending on your choices. Some software vendors give bulk discounts, so purchasing 10 seats of the same software could be less than 10 times the cost of one license. As for storage hardware, it might be possible to share drives and even media. Perhaps one or two storage systems can be shared by the entire team.
For a lot of backup software, most of the work is in the initial set up, then it runs automatically afterwards. That is the case for TSM. You create a "dsm.opt" file, and it can list all of the include/exclude files and other rules and policies. Once the first person sets this up, they share it with their co-workers.
Hopefully, if storage hardware was consolidated, such that you have fewer drives than people, you can probably have fewer people responsible for operations. For example, let's have the first five employees sharing one drive managed by Joe, and the second five employees sharing a second drive managed by Sally. Only two people need to spend time taking media offsite, bringing it back and so on.
Case 3: The hundred-person company
Again, it is possible that a hundred-person company consists of 10 departments of 10 people each, and they all follow the above approach independently, resulting in no economies of scale. But again, that is not likely.
Here one or a few people can invest time to evaluate backup solutions. Certainly far less than 100 times the effort for a one-person company.
Same with storage media. With 100 employees, you can now invest in a tape library with robotic automation.
Purchase of software and hardware. Again, discounts will probably apply for large deployments. Purchasing 1 tape library for all one hundred people is less than 10 times the cost and effort of 10 departments all making independent purchases.
With a hundred employees, you may have some differences in operating system, file systems and applications. Still, this might mean two to five versions of dsm.opt, and not 10 or 100 independent configurations.
Operations is where the big savings happen. TSM has "progressive incremental backup" so it only backs up changed data. Other backup schemes involve taking period full backups which tie up the network and consume a lot of back end resources. In head-to-head comparisons between IBM Tivoli Storage Manager and Symantec's NetBackup, IBM TSM was shown to use significantly less network LAN bandwidth, less disk storage capacity, and fewer tape cartridges than NetBackup.
The savings are even greater with data deduplication. Either using hardware, like IBM TS76750 ProtecTIER data deduplication solution, or software like the data deduplication capability built-in with IBM TSM v6.1, you can take advantage of the fact that 100 employees might have a lot of common data between them.
So, I have demonstrated how savings through economies of scale are achieved using IBM Tivoli Storage Manager. Adding one more person in each case is cheaper than the first person. The situation is not linear as Scott suggests. But what about larger deployments? IBM TS3500 Tape Library can hold one PB of data in only 10 square feet of data center floorspace. The IBM TS7650G gateway can manage up to 1 PB of disk, holding as much as 25 PB of backup copies. IT Analysts Tony Palmer, Brian Garrett and Lauren Whitehouse from Enterprise Strategy Group tried IBM TSM v6.1 out for themselves and wrote up a ["Lab Validation"] report. Here is an excerpt:
"Backup/recovery software that embeds data reduction technology can address all three of these factors handily. IBM TSM 6.1 now has native deduplication capabilities built into its Extended Edition (EE) as a no-cost option. After data is written to the primary disk pool, a deduplication operation can be scheduled to eliminate redundancy at the sub-file level. Data deduplication, as its name implies, identifies and eliminates redundant data.
TSM 6.1 also includes features that optimize TSM scalability and manageability to meet increasingly demanding service levels resulting from relentless data growth. The move from a proprietary back-end database to IBM DB2 improves scalability, availability, and performance without adding complexity; the DB2 database is automatically maintained and managed by TSM. IBM upgraded the monitoring and reporting capabilities to near real-time and completely redesigned the dashboard that provides visibility into the system. TSM and TSM EE include these enhanced monitoring and reporting capabilities at no cost."
The majority of Fortune 1000 customers use IBM Tivoli Storage Manager, and it is the backup software that IBM uses itself in its own huge data centers, including the cloud computing facilities. In combination with IBM Tivoli FastBack for remote office/branch office (ROBO) situations, and complemented with point-in-time and disk mirroring hardware capabilities such as IBM FlashCopy, Metro Mirror, and Global Mirror, IBM Tivoli Storage Manager can be an effective, scalable part of a complete Unified Recovery Management solution.
Well, it's Tuesday again, and you know what that means! IBM Announcements!
Today also happens to be [Election Day] in the United States, and some have questioned IBM's logic of making major storage announcements on Election Day. During the campaigns, a major theme was to help Small and Medium size businesses, because these are the engines of economic growth and improved employment.
Hopefully, you all saw today's Launch Webcast on these announcements, but in case you missed it, waiting in line at the polling station to cast your vote, or caught without electricity or Internet access from [Superstorm Sandy], it is now available [On-Demand].
The 2U control enclosure can have up to four additional 2U expansion enclosures, for a maximum of 120 drives, or 180TB of raw disk capacity. Like the Storwize V7000, the Storwize V3700 supports a [large number of servers and operating systems.]
Many of the features you already know from the Storwize V7000 are carried forward:
1GbE iSCSI + 8GbFC
8GbFC, 10GbE iSCSI/FCoE, Statement of Direction for 6Gb SAS
8GB per canister
4GB per canister, upgradeable to 8GB
Up to 4 control enclosures in a clustered system, each with up to 9 expansion enclosures
Up to 4 expansion enclosures
Maximum Number of drives/TB
Up to 120 drives/180TB
RAID levels supported
GUI, CLI, SMI-S API
GUI, CLI, SMI-S API
Internal (included), external (optional)
Internal only (included)
Non-disruptive data migration
One-directional (migrate to Storwize V3700, included)
Statement of direction
Up to 256 targets (included)
Up to 64 targets (included) Statement of Direction for optional 2,040 targets
Metro Mirror and Global Mirror (optional)
Statement of Direction (optional)
The IBM Storwize V3700 is offered at attractive leasing options through IBM Global Financing.
IBM LTO-6 drives and midrange tape libraries
Last month, IBM's [Tape and Storage Hypervisor Announcements] included LTO-6 for the enterprise-class TS3500 tape library. Today, the LTO-6 support is complete with support for midrange tape drives and libraries.
There are two tape drive models. The TS2260 is based on the half-height drive, intended for occasional 9-to-5 usage. The TS2360 is based on the full-height drive, intended for 24x7 access. These drives can read LTO-4 and LTO-5 tape cartridge media, and can write LTO-5 cartridge media. The new LTO-6 tape cartridge media is expected to be available next month.
In addition to the IBM TS3500 Enterprise Tape Library, LTO-6 is now supported on all of the midrange tape libraries: TS2900, TS3100, TS3200 and TS3310.
IBM Linear Tape File System Library Edition V2.1.2
There are two levels of [Linear Tape File System], or LTFS for short. The first is the Single Drive Edition (LTFS-SDE), which allows you to attach an LTO-5, LTO-6 or TS1140 tape drive to a single workstation, and allow you to mount tape cartridges as easy as mounting USB memory sticks. This presents a full file system view that allows you to read, edit, create, and even drag-and-drop files to other file systems. The LTFS-SDE driver is available for Windows, Linux, and Mac OS.
The second is the Library Edition (LTFS-LE), which allows you to mount the entire tape library as a file system. Each tape cartridge in the library is presented as a subdirectory folder, that you can access like any file system on disk. This was only available for Linux systems, which could then export the files through NFS, FTP or HTTP protocols to other clients. Now, with release v2.1.2, LTFS-LE supports Windows servers, so that you can share the files with other clients through CIFS as well.
IBM Tivoli Storage Productivity Center v4.2.2 Overview and Update
This was an updated version of the presentation I gave last July in Orlando, Florida (see my post [IBM Storage University - Day 1]). Since it might have been awhile since the Australian audience had heard about the latest and greatest for Tivoli Storage Productivity Center, I decided to cover the enhancements of 4.2.0, 4.2.1 and 4.2.1 combined.
IBM Tivoli Storage Productivity Center is an important part of IBM's "Storage Hypervisor" solution, combining a single pane of glass for management with non-disruptive storage virtualization with SVC and Storwize V7000.
IBM Storwize V7000 and SVC integration with VMware
Alexi Giral from IBM Sydney presented this session on how Storwize V7000 and SVC serve as the "Storage Hypervisor" for VMware server virtualization environments. The focus was on the FCP and iSCSI block-only access modes of these devices, although one could use IBM Storwize V7000 Unified to provide NFS file-level access to VMware. Alexi covered both VMware Vsphere v4 and v5, as there are a few differences.
IBM Storwize V7000 and SVC supports thin provisioning, VMware's VAAI interface, VMware's Site Recovery Manager, and provides a storage management plug-in to Vmware's vCenter. The SVC has extended the distance for split-cluster configurations that support VMware's vMotion live partition mobility and High Availiability (HA) up to 300km using active DWDM.
Tape Storage Reinvented: What's New and Exciting in the Tape World?
Special thanks to Jim Fisher and Jim Karp for providing me this presentation, videos and supporting materials for me to present this session. I gave this as the first break-out session on Tuesday, and then repeated as the last break-out session on Thursday. Several of the attendees in the audience mocked my title, with taunts like "What could be NEW or EXCITING about tape?" I covered four key areas:
The new TS1140 tape drive, including the corresponding model-JC tape that holds 4TB native (12 TB compressed!).
The enhanced TS3500 with the Tape Library Connector Shuttle. I had a video that shows how tapes can be sent from one TS3500 tape library string to another.
The new Linear Tape File System (LTFS), both the single drive edition and the library edition
The new 3592-C07 FICON controller for our mainframe clients
By the end of the session, the folks that taunted me were honestly impressed that they learned a few things, and had not realized so much has been developed recently in the world of tape.
An exciting new addition to the IBM storage line, the Storwize V7000 is a very versatile and solid choice as a midrange storage device. This session will cover a technical overview of the controller as well as its positioning within the overall IBM storage line.
xST04 - XIV Implementation, Migration and Optimization
Attend this session to learn how to integrate the IBM XIV Storage System in your IT environment. After this session, you should understand where the IBM XIV Storage system fits, and understand how to take full advantage of the performance capabilities of XIV Storage by using the massive parallelism of its grid architecture. You will learn how to migrate data onto the XIV and hear about real world client experiences.
xST05 - IBM's Storage Strategy in the Smarter Computing Era
Want to understand IBM's storage strategy better? This session will cover the three key themes of IBM's Smarter Computing initiative: Big Data, Optimized Systems, and Cloud. IBM System Storage strategy has been aligned to meet the storage efficiency, data protection and retention required to meet these challenges.
IBM offers encryption in a variety of ways. Data can be encrypted on the server, in the SAN switch, or on the disk or tape drive. This session will explain how encryption works, and explain the pros and cons with each encryption option.
sAC01 - IBM Information Archive for email, Files and eDiscovery
IBM has focused on data protection and retention, and the IBM Information Archive is the ideal product to achieve it. Come to this session to discuss archive solutions, compliance regulations, and support for full-text indexing and eDiscovery to support litigation.
sGE04 - IBM's Storage Strategy in the Smarter Computing Era
Want to understand IBM's storage strategy better? This session will cover the three key themes of IBM's Smarter Computing initiative: Big Data, Optimized Systems, and Cloud. IBM System Storage strategy has been aligned to meet the storage efficiency, data protection and retention required to meet these challenges.
sSM03 - IBM Tivoli Storage Productivity Center – Overview and Update
IBM's latest release of IBM Tivoli Storage Productivity Center is v4.2.2, a storage resource management tool that manages both IBM and non-IBM storage devices, including disk systems, tape libraries, and SAN switches. This session will give an overview of the various components of Tivoli Storage Productivity Center and provide an update on what's new in this product.
sSN06 - SONAS and the Smart Business Storage Cloud (SBSC)
Confused over IBM's Cloud strategy? Trying to figure out how IBM Storage plays in private, hybrid or public cloud offerings? This session will cover both the SONAS integrated appliance and the Smart Business Storage Cloud customized solution, and will review available storage services on the IBM Cloud.
sTA01 - Tape Storage Reinvented: What's New and Exciting in the Tape World?
This very informative session will keep you up to date with the latest tape developments. These include the TS3500 tape library connector Model SC1 (Shuttle). The shuttle enables extreme scalability of over 300,000 tape cartridges in a single library image by interconnecting multiple tape libraries with a unique, high speed transport system. The world's fastest tape drive, the TS1140 3592-E07, will also be presented. The performance and functionality of the new TS1140 as well as the new 4TB tape media will be discussed. Also, the IBM System Storage Linear Tape File System (LTFS), including the Library Edition, will be presented. LTFS allows a disk-like, drag-and-drop interface for tape. This is a not-to-be-missed session for all you tape lovers out there!
In December, I will be going to Gartner's Data Center Conference in Las Vegas, but the agenda has not been finalized, so I will save that for another post.
Jim is an IBM Fellow for IBM Systems and Technology Group. There are only 73 IBM Fellows currently working for IBM, and this is the highest honor IBM can bestow on an employee. He has been working with IBM since 1968.
He is tasked with predicting the future of IT, and help drive strategic direction for IBM. Cost pressures, requirements for growth, accelerating innovation and changing business needs help influence this direction.
IBM's approach is to integrate four different "IT building blocks":
Scale-up Systems, like the IBM System Storage DS8000 and TS3500 Tape Library
Resource Pools, such as IBM Storage Pools formed from managed disks by IBM SAN Volume Controller (SVC)
Integrated stacks and appliances, integrated software and hardware stacks, from Storwize V7000 to full rack systems like IBM Smart Analytics Server or CloudBurst.
Mobility of workloads and resources requires unified end-to-end service management. Fortunately, IBM is the #1 leader in IT Service Management solutions.
Jim addressed three myths:
Myth 1: IT Infrastructures will be homogenous.
Jim feels that innovations are happening too rapidly for this to ever happen, and is not a desirable end-goal. Instead, a focus to find the right balance of the IT building blocks might be a better approach.
Myth 2: All of your problems can be solved by replacing everything with product X.
Jim feels that the days of "rip-and-replace" are fading away. As IBM Executive Steve Mills said, "It isn't about the next new thing, but how well new things integrate with established applications and processes."
Myth 3: All IT will move to the Cloud model.
Jim feels a substantial portion of IT will move to the Cloud, but not all of it. There will always be exceptions where the old traditional ways of doing things might be appropriate. Clouds are just one of the many building blocks to choose from.
Jim's focus lately has been finding new ways to take advantage of virtualization concepts. Server, storage and network virtualization are helping address these challenges through four key methods:
Sharing - virtualization that allows a single resource to be used by multiple users. For example, hypervisors allow several guest VM operating systems share common hardware on a single physical server.
Aggregation - virtualization that allows multiple resources to be managed as a single pool. For example, SAN Volume Controller can virtualize the storage of multiple disk arrays and create a single storage pool.
Emulation - virtualization that allows one set of resources to look and feel like a different set of resources. Some hypervisors can emulate different kinds of CPU processors, for example.
Insulation - virtualization that hides the complexity from the end-user application or other higher levels of infrastructure, making it easier to make changes of the underlying managed resources. For example, both SONAS and SAN Volume Controller allow disk capacity to be removed and replaced without disruption to the application.
In today's economy, IT transformation costs must be low enough to yield near-term benefits. The long-term benefits are real, but near-term benefits are needed for projects to get started.
What set's IBM ahead of the pack? Here was Jim's list:
100 Years of Innovation, including being the U.S. Patent leader for the last 18 years in a row
IBM's huge investment in IBM Research, with labs all over the globe
Leadership products in a broad portfolio
Workload-optimized designs with integration from middleware all the way down to underlying hardware
Comprehensive management software for IBM and non-IBM equipment
Clod is an IBM Distinguished Engineer and Chief Technical Strategist for IBM System Storage. His presentation focused on trends and directions in the IT storage industry. Clod started with five workload categories:
To address these unique workload categories, IBM will offer workload-optimized systems. The four drivers on the design for these are performance, efficiency, scalability, and integration. For example, to address performance, companies can adopt Solid-State Drives (SSD). Unfortunately, these are 20 times more expensive dollar-per-GB than spinning disk, and the complexity involved in deciding what data to place on SSD was daunting. IBM solved this with an elegant solution called IBM System Storage Easy Tier, which provides automated data tiering for IBM DS8000, SAN Volume Controller (SVC) and Storwize V7000.
For scalability, IBM has adopted Scale-Out architectures, as seen in the XIV, SVC, and SONAS. SONAS is based on the highly scalable IBM General Parallel File System (GPFS). File systems are like wine, they get better with age. GPFS was introduced 15 years ago, and is more mature than many of the other "scalable file systems" from our competition.
Areal Density advancements on Hard Disk Drives (HDD) are slowing down. During the 1990s, the IT industry enjoyed 60 to 100 percent annual improvement in areal density (bits per square inch). In the 2000s, this dropped to 25 to 40 percent, as engineers are starting to hit various physical limitations.
Storage Efficiency features like compression have been around for a while, but are being deployed in new ways. For example, IBM invented WAN compression needed for Mainframe HASP. WAN compression became industry standard. Then IBM introduced compression on tape, and now compression on tape is an industry standard. ProtecTIER and Information Archive are able to combine compression with data deduplication to store backups and archive copies. Lastly, IBM now offers compression on primary data, through the IBM Real-Time Compression appliance.
For the rest of this decade, IBM predicts that tape will continue to enjoy (at least) 10 times lower dollar-per-GB than the least expensive spinning disk. Disk and Tape share common technologies, so all of the R&D investment for these products apply to both types of storage media.
For integration, IBM is leading the effort to help companies converge their SAN and LAN networks. By 2015, Clod predicts that there will be more FCoE purchased than FCP. IBM is also driving integration between hypervisors and storage virtualization. For example, IBM already supports VMware API for Array Integration (VAAI) in various storage products, including XIV, SVC and Storwize V7000.
Lastly, Clod could not finish a presentation without mentioning Cloud Computing. Cloud storage is expected to grow 32 percent CAGR from year 2010 to 2015. Roughly 10 percent of all servers and storage will be in some type of cloud by 2015.
As is often the case, I am torn between getting short posts out in a timely manner versus spending some more time to improve the length and quality of information, but posted much later. I will spread out the blog posts in consumable amounts throughout the next week or two, to achieve this balance.
The new [IBM System Storage Tape Controller 3592 Model C07] is an upgrade to the previous C06 controller. Like the C06, the new 3592-C07 can have up to four FICON (4Gbps) ports, four FC ports, and connect up to 16 drives. The difference is that the C07 supports 8Gbps speed FC ports, and can support the [new TS1140 tape drives that were announced on May 9]. A cool feature of the C07 is that it has a built-in library manager function for the mainframe. On the previous models, you had to have a separate library manager server.
Crossroads ReadVerify Appliance (3222-RV1)
IBM has entered an agreement to resell [Crossroads ReadVerify Appliance], or "RV1" for short. The RV1 is a 1U-high server with software that gathers information on the utilization, performance and health for a physical tape environment, such as an IBM TS3500 Tape Library. The RV1 also offers a feature called "ArchiveVerify" which validates long-term retention archive tapes, providing an audit trail on the readability of tape media. This can be useful for tape libraries attached behind IBM Information Archive compliance storage solution, or the IBM Scale-Out Network Attached Storage (SONAS).
As an added bonus, Crossroads has great videos! Here's one, titled [Tape Sticks]
Linear Tape File System (LTFS) Library Edition Version 2.1
While the hardware is all refreshed, the overall "scale-out" architecture is unchanged. Kudos to the XIV development team for designing a system that is based entirely on commodity hardware, allowing new hardware generations to be introduced with minimal changes to the vast number of field-proven software features like thin provisioning, space-efficient read-only and writeable snapshots, synchronous and asynchronous mirroring, and Quality of Service (QoS) performance classes.
The new XIV Gen3 features an Infiniband interconnect, faster 8Gbps FC ports, more iSCSI ports, faster motherboard and processors, SAS-NL 2TB drives, 24GB cache memory per XIV module, all in a single frame IBM rack that supports the IBM Rear Door Heat Exchanger. The results are a 2x to 4x boost in performance for various workloads. Here are some example performance comparisons:
Disclaimer: Performance is based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user's job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. Your mileage may vary.
In a Statement of Direction, IBM also has designed the Gen3 modules to be "SSD-ready" which means that you can insert up to 500GB of Solid-State drive capacity per XIV module, up to 7.5TB in a fully-configured 15 module frame. This SSD would act as an extension of DRAM cache, similar to how Performance Accelerator Modules (PAM) on IBM N series.
IBM will continue to sell XIV Gen2 systems for the next 12-18 months, as some clients like the smaller 1TB disk drives. The new Gen3 only comes with 2TB drives. There are some clients that love the XIV so much, that they also use it for less stringent Tier 2 workloads. If you don't need the blazing speed of the new Gen3, perhaps the lower cost XIV Gen2 might be a great fit!
As if I haven't said this enough times already, the IBM XIV is a Tier-1, high-end, enterprise-class disk storage system, optimized for use with mission critical workloads on Linux, UNIX and Windows operating systems, and is the ideal cost-effective replacement for EMC Symmetrix VMAX, HDS USP-V and VSP, and HP P9000 series disk systems, . Like the XIV Gen2, the XIV Gen3 can be used with IBM System i using VIOS, and with IBM System z mainframes running Linux, z/VM or z/VSE. If you run z/OS or z/TPF with Count-Key-Data (CKD) volumes and FICON attachment, go with the IBM System Storage DS8000 instead, IBM's other high-end disk system.