Tony Pearson is a Master Inventor and Senior IT Architect for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services.
(Short URL for this blog: ibm.co/Pearson )
My books are available on Lulu.com! Order your copies today!
Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
It's that time again. Every year, IBM hosts the "System Storage Technical University". I have been going to these since they first started in the 1990s. This time we are at the lovely [Hilton Orlando] in Orlando, Florida.
For those who want to relive past events, here are my blog posts from this event in 2010:
As was the case last year, IBM once again will run this conference alongside the [IBM System x Technical University] the same week, in the same hotel. This allows attendees to cross over to the other side to see a few sessions of the other conference. I took advantage of this last year, and plan to do so again this year as well!
For those on Twitter, you can follow my tweets at [@az990tony] or search on the hash tag #ibmtechu.
Maria Boonie is the IBM Director for IBM Worldwide Training and Technical Conferences. She indicated that there were 1500 attendees this week crossing both the System Storage and System x conferences at this hotel. There are 35 vendors that have sponsored this event, and they will be at the "Solutions Center" being held Monday through Wednesday this week.
She took this opportunity to plug IBM's latest education offerings, including Guaranteed-to-Run implementation classes, and Instructor-Led Online (ILO) technical classes.
Brian Truskowski is IBM General Manager for System Storage and Networking. I used to directly report to him in a previous role, and a few years ago he used to be the IBM CIO that helped with IBM's internal IT transformation.
Brian indicates that the previous approach to growth was to "Just Buy More", but this has some unintended consequences. He argued that companies need to adopt one or more of the following approaches to growth:
Stop storing so much - reduce data footprint using storage efficiency capabilities like data deduplication and compression
Store more with what is already on the floor - improve storage utilization with technologies like storage virtualization and thin provisioning
Move data to the right place - implement automated tiering, such as "Flash & Stash" between Solid-state drives and spinning disk, and/or Information Lifecycle Management (ILM) between disk and tape. Studies at some clients have found over 70 percent of data has not beed touched in the last 90 days
This time of dramatic change is the result of a "perfect storm" of influences, including the rising costs and risks associated with losing data, the increased need to index and search data, the desire for "Business Analytics", and the expectation for 100 percent up-time. This is driving IBM to offer hyper-efficient backup, Continuous Data Availability, and Smart Archive solutions.
The case study of SPRINT is a good example. SPRINT is a Telecommunications provider for cell phone users. They were challenged with 35 percent utilization, 165 storage arrays from six different vendors, and an expected 100 percent increase in their IT maintenance costs. After implementing IBM SAN Volume Controller (SVC) and Tivoli Storage Productivity Center (TPC) to manager 2.9 PB of data, SPRINT increased their utilization to 82 percent, reduced down to 70 storage arrays from only three vendors, and reduced their maintenance costs by 57 percent. Today, SPRINT now manages over 5 PB of data with SVC and TPC, have reduced their power and cooling by 3.5 million KWh, representing $320,000 USD in savings.
Roland Hagan is the IBM Vice President for the System x server platform. He talked about the "IT Conundrum" that represents a vicious cycle of "IT Sprawl", "Untrusted Data" and "Inflexible IT" that seem to feed each other. IBM is trying to change behavior, from thinking and dealing with physical boxes representing servers, storage and network gear, to a more holistic view focused on workloads, shared resource pools, independent scaling, and automated management.
IBM is leading the server marketplace, in part because of clever things IBM is doing, especially in developing the eX5 chipset that surrounds x86 commondity processors, and in part because of actions or decisions the competition have taken:
It doesn't break IBM's heart that Oracle decided to drop software support of their database on Itanium, which focued entirley against HP. Oracle runs on IBM servers better than Oracle/Sun or HP servers today, so it does not impact us, other than IBM has had a lot of people leaving HP to switch over to IBM.
HP has taken on a new CEO and reduced their R&D budget, causing them to be late-to-market on some of their offerings.
Dell continues to focus on the small and medium sized customer, and have not really broken into the "Enterprise".
Newcomer Cisco has some great technology that only seems to be adoptable in "Green Field" situations, as it does not integrate well with existing data center infrastructures.
The combination of ex5 chip-set architecture, Max5 memory expansion capabilities and Virtual Network Interface Cards (NICs), provide for a very VM-aware platform. For those who are not ready to fully adopt an integrated stack like IBM CloudBurst, IBM offers the Tivoli Service Automation software on its own, and a new [IBM BladeCenter Foundation for Cloud] as stepping stones to get there.
There are certainly more attendees here than last year, which reflects either the change in location (Orlando, Florida rather than Washington DC) as well as the economic recovery. I'm looking forward to an excellent week!
IBM Information Archive for email, files and eDiscovery
Not too many people have heard of IBM's Smart Archive strategy and the storage products IBM offers to meet compliance regulations. This session covered the following:
The differences between backup and archive, including a few of my own personal horror stories helping companies who had foolishly thought that keeping backup copies for years would adequately serve as their archive strategy
The differences between optical media, Write-Once Read-Many (WORM) media, and Non-Erasable, Non-Rewriteable (NENR) storage options.
Why putting a [space heater] on your data center floor is a bad idea, driving up power and cooling costs for little business value to the enterprise once the unit is full of rarely accessed read-only data.
An overview of the [IBM Information Archive], an integrated stack of servers, storage and software that replaces previous offerings such as the IBM System Storage DR550 and the IBM Grid Medical Archive Solution (GMAS).
The marketing bundle known as the [Information Archive for Email, Files and eDiscovery] that combines the Information Archive storage appliance with Content Collectors for email and file systems, as well as eDiscovery tools, and implementation services for a solution that can support a small or medium size business, up to 1400 employees.
IBM Tivoli Storage Productivity Center v4.2 Overview and Update
Many of the concerns raised when I [presented v4.1 at this conference last year] were addressed this year in v4.2, including full performance statistics for IBM XIV storage system, storage resource agent support for HP-UX and Solaris, and a variety of other issues.
I presented this overview in stages:
"Productivity Center Basic Edition" that comes pre-installed on the IBM System Storage Productivity Center hardware console, that provides discover of devices, basic configuration, and a clever topology viewer of what is connected to what.
"Productivity Center for Disk" and "Productivity Center for Disk Midrange Edition (MRE)" that provides real-time and historical performance monitoring, asset and capacity reporting.
"Productivity Center for Replication" which supports monitoring, failover and failback for FlashCopy, Metro Mirror and Global Mirror on the SVC, Storwize V7000, DS8000, DS6000 and ESS 800.
"Productivity Center for Data" which supports reporting on files, file systems and databases on DAS, SAN and NAS attached storage from a Operating System viewpoint.
"Productivity Center Standard Edition" which includes all of the above except "Replication", and adds performance monitoring of SAN Fabric gear, and some very clever analytics to improver performance and problem determination.
One of the questions that came up was "How big does my company have to be to consider using Productivity Center?" which I answered as follows:
"If you are a small company, and the "IT Person" has responsibilities outside the IT, and managing the few pieces of kit is just part of his job, then consider just using the web-based GUI through a Firefox or similar browser. If you are a medium sized company with dedicated IT personnel, but mostly run by system admins or database admins that manage storage and networks on the side, you might want to consider the "Storage Control" plug-in for IBM Systems Director. But if you are larger shop, and there are employees with the title "Storage Administrator" and/or "SAN Administrator", then Tivoli Storage Productivity Center is for you."
Tivoli Storage Productivity Center has matured into a fine piece of software that truly can help medium and large sized data centers manage their storage and storage networking infrastructure.
I like speaking the first day of these events. Often people come in just to hear the keynote speakers, and stay the afternoon to hear a few break-out sessions before they leave Tuesday or Wednesday for other meetings.
Continuing my coverage of the [IBM System Storage Technical University 2011], I participated in the storage free-for-all, which is a long-time tradition, started at SHARE User Group conference, and carried forward to other IT conferences. The free-for-all is a Q&A Panel of experts to allow anyone to ask any question. These are sometimes called "Birds of a Feather" (BOF). Last year, we had two: one focused on Tivoli Storage software, and the second to cover storage hardware. This year, we had two, one for System x called "Ask the eXperts", and one for System Storage called "Storage Free-for-All". This post covers the latter.
(Disclaimer: Do not shoot the messenger! We had a dozen or more experts on the panel, representing System Storage hardware, Tivoli Storage software, and Storage services. I took notes, trying to capture the essence of the questions, and the answers given by the various IBM experts. I have spelled out acronyms and provided links to relevant materials. The answers from individual IBMers may not reflect the official position of IBM management. Where appropriate, my own commentary will be in italics.)
You are in the wrong session! Go to "Ask the eXperts" session next door!
The TSM GUI sucks! Are there any plans to improve it?
Yes, we are aware that products like IBM XIV have raised the bar for what people expect from graphical user interfaces. We have plans to improve the TSM GUI. IBM's new GUI for the SAN Volume Controller and Storwize V7000 has been well-received, and will be used as a template for the GUIs of other storage hardware and software products. The GUI uses the latest HTML5, Dojo widgets and AJAX technologies, eliminating Java dependencies on the client browser.
Can we run the TSM Admin GUI from a non-Windows host?
IBM has plans to offer this. Most likely, this will be browser-based, so that any OS with a modern browser can be used.
As hard disk drives grow larger in capacity, RAID-5 becomes less viable. What is IBM doing to address this?
IBM is aware of this problem. IBM offers RAID-DP on the IBM N series, RAID-X on the IBM XIV, and RAID-6 on its other disk systems.
TPC licensing is outrageous! What is IBM going to do about it?
About 25 percent of DS8000 disk systems have SSD installed. Now that IBM DS8000 Easy Tier supports "any two" tiers, roughly 50 percent of DS8000 now have Easy Tier activated. No idea on how Easy Tier has been adopted on SVC or Storwize V7000.
We have an 8-node SVC cluster, should we put 8 SSD drives into a single node-pair, or spread them out?
We recommend putting a separate Solid-State Drive in each SVC node, with RAID-1 between nodes of a node-pair. By separating the SSD across I/O groups, you can reduce node-to-node traffic.
How well has SVC 6.2 been adopted?
The inventory call-home data is not yet available. The only SVC hardware model that does not support this level of software was the 2145-4F2 introduced in 2003. Every other model since then can be updated to this level.
Will IBM offer 600GB FDE drives for the IBM DS8700?
Currently, IBM offers 300GB and 450GB 15K RPM drives with the Full-Disk Encryption (FDE) capability for the DS8700, and 450GB and 600GB 10K RPM drives with FDE for the IBM DS8800. IBM is working with its disk suppliers to offer FDE on other disk capacities, and on SSD and NL-SAS drives as well, so that all can be used with IBM Easy Tier.
Is there a reason for the feature lag between the Easy Tier capabilities of the DS8000, and that of the SVC/Storwize V7000?
We have one team for Easy Tier, so they implement it first on DS8000, then port it over to SVC/Storwize V7000.
Does it even make sense to have separate storage tiers, especially when you factor in the cost of SVC and TPC to make it manageable?
It depends! We understand this is a trade-off between cost and complexity. Most data centers have three or more storage tiers already, so products like SVC can help simplify interoperability.
Are there best practices for combining SVC with DS8000? Can we share one DS8000 system across two or more SVC clusters?
Yes, you can share one DS8000 across multiple SVC clusters. DS8000 has auto-restripe, so consider having two big extent pools. The queue depth is 3 to 60, so aim to have up to 60 managed disks on your DS8000 assigned to SVC. The more managed disks the better.
The IBM System Storage Interopability Center (SSIC) site does not seem to be designed well for SAN Volume Controller.
Yes, we are aware of that. It was designed based on traditional Hardware Compatability Lists (HCL), but storage virtualization presents unique challenges.
How does the 24-hour learning period work for IBM Easy Tier? We have batch processing that runs from 2am to 8am on Sundays.
You can have Easy Tier monitor across this batch job window, and turn Easy Tier management between tiers on and off as needed.
Now that NetApp has acquired LSI, is the DS3000 still viable?
Yes, IBM has a strong OEM relationship with both NetApp and LSI, and this continues after the acquisition.
If have managed disks from a DS8000 multi-rank extent pool assigned to multiple SVC clusters, won't this affect performance?
Yes, possibly. Keep managed disks on seperate extent pools if this is a big concern. A PERL script is available to re-balance SVC striped volumes as needed after these changes.
Is the IBM [TPC Reporter] a replacement for IBM Tivoli Storage Productivity Center?
No, it is software, available at no additional charge, that provides additional reporting to those who have already licensed Tivoli Storage Productivity Center 4.1 and above. It will be updated as needed when new versions of Productivity Center are released.
We are experiencing lots of stability issues with SDD, SDD-PCM and SDD-DSM multipathing drivers. Are these getting the development attention they deserve?
IBM's direction is to shift toward native OS-based multipathing drivers.
Is anyone actually thinking of deploying public cloud storage in the near-term?
A few hands in the audience were raised.
None of the IBM storage devices seem to have [REST API]. Cloud storage providers are demanding this. What are IBM plans?
IBM plans to offer REST on SONAS. IBM uses SONAS internally for its own cloud storage offerings.
If you ask a DB2 specialist, an AIX specialist, and a System Storage specialist, on how to configure System p and System Storage for optimal performance, you get three different answers. Are there any IBMers who are cross-functional that can help?
Yes, for example, Earl Jew is an IBM Field Technical Support Specialist (FTSS) for both System p and Storage, and can help you with that.
Both Oracle and Microsoft recommend RAID-10 for their applications.
Don't listen to them. Feel free to use RAID-5, RAID-6 or RAID-X instead.
Resizing SVC source volumes forces ongoing FlashCopy or Metro Mirror relatiohships to be stopped. Does IBM plan to address this?
Currently, you have to stop, resize both source and target, then start the relationship again. Consider getting IBM Tivoli Storage Productivity Center for Replication (TPC-R).
IBM continues to support this for exising clients. For new deployments, IBM offers SONAS and the Information Archive (IA).
When will I be able to move SVC volumes between I/O groups?
You can today, but it is disruptive to the operating system. IBM is investigating making this less disruptive.
Will XIV ever support the mainframe?
It does already, with support for both Linux and z/VM today. For VSE support, use SVC with XIV. For those with the new zBX extension, XIV storage can be used with all of the POWER and x86-based operating systems supported. IBM has no plans to offer direct FICON attachment for z/OS or z/TPF.
Not a question - Kudos to the TSM and ProtecTIER team in supporting native IP-based replication!
When will IBM offer POWER-based models of the XIV, SVC and other storage devices?
IBM's decision to use industry-standard x86 technology has proven quite successful. However, IBM re-looks at this decision every so many years. Once again, the last iteration determined that it was not worth doing. A POWER-based model might not beat the price/performance of current x86 models, and maintaining two separate code bases would hinder development of new innovations.
We have both System i and System z, what is IBM doing to address the fact that PowerHA and GDPS are different?
IBM TPC-R has a service offering extension to support "IBM i" environments. GDPS plans to support multi-platform environments as well.
This was a great interactive session. I am glad everyone stayed late Thursday evening to participate in this discussion.
IBM Tivoli Storage Productivity Center version 4.1 Overview
In conferences like these, there are two types of product-level presentations. An "Overview" explains how products work today to those who are not familiar with it. An "Update" explains what's new in this version of the product for those who are already familiar with previous releases. This session was an Overview of [Tivoli Storage Productivity Center], plus some information of IBM's Storage Enterprise Resource Planner [SERP] from IBM's acquisition of NovusCG.
I was one of the original lead architects of Productivity Center many years ago, and was able to share many personal experiences about its evolution in development and in the field at client facilities. Analysts have repeatedly rated IBM Productivity Center as one of the top Storage Resource Management (SRM) tools available in the marketplace.
I would like to thank my colleague Harley Puckett for his assistance in putting the finishing touches on this presentation. This was my best attended session of the week, indicating there is a lot of interest in this product in particular, and managing a heterogeneous mix of storage devices in general. To hear a quick video introduction, see Harley Puckett's presentation at the [IBM Virtual Briefing Center].
Information Lifecycle Management (ILM) Overview
Can you believe I have been doing ILM since 1986? I was the lead architect for DFSMS which provides ILM support for z/OS mainframes. In 2003-2005, I spent 18 months in the field performing ILM assessments for clients, and now there are dozens of IBM practitioners in Global Services and Lab Services that do this full time. This is a topic I cover frequently at the IBM Executive Briefing Center [EBC], because it addresses several top business challenges:
Reducing costs and simplifying management
Improving efficiency of personnel and application workloads
Managing risks and regulatory compliance
IBM has a solution based on five "entry points". The advantage of this approach is that it allows our consultants to craft the right solution to meet the specific requirements of each client situation. These entry points are:
Tiered Information Infrastructure - we don't limit ourselves to just "Tiered Storage" as storage is only part of a complete[information infrastructure] of servers,networks and storage
Storage Optimization and Virtualization - including virtual disk, virtual tape and virtual file solutions
Process Enhancement and Automation - an important part of ILM are the policies and procedures, such as IT Infrastructure Library [ITIL] best practices
Archive and Retention - space management and data retention solutions for email, database and file systems
When I presented ILM last year, I did not get many attendees. This time I had more, perhaps because of the recent announcement of ILM and HSM support in IBM SONAS and our April announcement of IBM DS8700 Easy Tier has renewed interest in this area.
I have safely returned back to Tucson, but have still a lot of notes of the other sessions I attended, so will cover them this week.
Well, it's Tuesday again, and you know what that means... IBM announcements!
Last week, IBM had a big storage launch of various products, with the June 4 announcements at the IBM Edge 2012 conference. I provided highlights in my post [IBM Edge Announcements]. As promised, here are the rest of the announcements.
SONAS v1.3.2 adds support for management by the newly announced IBM Tivoli Storage Productivity Center v5.1 release. Also, IBM now officially supports "Gateway configurations" that have the storage nodes connected to XIV or Storwize v7000 disk systems. These gateway configurations offer new flexible choices and options for our ever-expanding set of clients.
ProtecTIER appliances and gateways
IBM ProtecTIER line of data deduplication appliances and gateways add CIFS file system support. Rather than using OST or a VTL interface, you now have CIFS as a new option for host attach. Also, IBM introduces the new TS7620 Express model, with options for 5.4TB and 11TB in capacity, replacing the previous TS7610 entry level.
LTFS Storage Manager
The Linear Tape File System (LTFS) allows files to be stored on tape cartridges in a manner that allows them to be mounted as file systems, much like a USB memory stick. The new LTFS Storage Manager software allows you to manage a collection of files across a set of cartridges, moving files from one cartridge to another, consolidating valid data onto fewer cartridges, and removing files no longer needed. This is sometimes referred to as "lifecycle management".
Tape System Library Manager
When IBM first introduced the "shuttle" that allowed up to fifteen TS3500 tape libraries to be connected together into a single system, only HPSS customers could take advantage of this. Software was required to coordinate the movement of cartridges from one library to another. The new IBM Tape System Library Manager now offers an alternative to HPSS for coordinating this activity.
DS8000 v6.3 microcode
IBM now offers 400GB solid-state drives. IBM's market leading support for Full Disk Encryption (FDE) is now extended to cover all drive speeds, from the slowest 7200RPM NL-SAS drives up to the fastest solid-state. IBM Easy Tier extends its super-easy implementation to work across all three of these tiers including encryption.
IBM now offers implementation services for IBM XIV Gen3 storage system, and the N series models 3220 and 3240.
This week I am on the road visiting various clients. Next week, Moscow Russia for the "Edge Comes to You" event!
The "Basic" offering includes a single IBM Storwize V7000 controller enclosure, and three year warranty package that includes software licenses for IBM Tivoli Storage FlashCopy Manager (FCM) and IBM Tivoli Storage Productivity Center for Disk - Midrange Edition (MRE). Planning, configuration and testing services for the software are included and can be performed by either IBM or an IBM Business Partner.
The "Standard" offering allows for multiple IBM Storwize V7000 enclosures, provides three year warranty package for the FCM and MRE software, and includes implementation services for both the hardware and the software components. These services can be performed by IBM or an IBM Business Partner.
Why bundle? Here are the key advantages for these offerings:
Increased storage utilization! First introduced in 2003, IBM SAN Volume Controller is able to improve storage utilization by 30 percent through virtualization and thin provisioning. IBM Storwize V7000 carries on this tradition. Space-efficient FlashCopy is included in this bundle at no additional charge and can reduce the amount of storage normally required for snapshots by 75 percent or more. IBM Tivoli Storage FlashCopy Manager can manage these FlashCopy targets easily.
Improved storage administrator productivity! The new IBM Storwize V7000 Graphical User Interface can help improve administrator productivity up to 2 times compared to other midrange disk solutions. The IBM Tivoli Storage Productivity Center for Disk - Midrange Edition provides real-time performance monitoring for faster analysis time.
Increased application performance! This bundle includes the "Easy Tier" feature at no additional charge. Easy Tier is IBM's implementation of sub-LUN automated tiering between Solid-State Drives (SSD) and spinning disk. Easy Tier can help improve application throughput up to 3 times, and improve response time up to 60 percent. Easy Tier can help meet or exceed application performance levels with its internal "hot spot" analytics.
Increased application availability! IBM Tivoli Storage FlashCopy Manager provides easy integration with existing applications like SAP, Microsoft Exchange, IBM DB2, Oracle, and Microsoft SQL Server. Reduce application downtime to just seconds with backups and restores using FlashCopy. The built-in online migration feature, included at no additional charge, allows you to seamlessly migrate data from your old disk to the new IBM Storwize V7000.
Significantly reduced implementation time! This bundle will help you cut implementation time in half, with little or no impact to storage administrator staff. This will help you realize your return on investment (ROI) much sooner.
I presented IBM's Smart Archive strategy and the storage products IBM offers to archive data and meet compliance regulations:
The differences between backup and archive, including a few of my own personal horror stories helping companies who had foolishly thought that keeping backup copies for years would adequately serve as their archive strategy
The differences between Write-Once Read-Many (WORM) media, and Non-Erasable, Non-Rewriteable (NENR) storage options.
How disk-only archive solutions become "space heaters" for your data center.
An overview of the various storage hardware options from IBM.
An explanation of the different IBM software offerings to help complement the storage hardware choices.
IBM TotalStorage Productivity Center (TPC): New Features and Functions
Mike Griese, IBM program manager for TPC, presented the latest in TPC 5.1 version announced this week. His session was organized into four key sections:
Insights - TPC 5.1 integrates COGNOS reporting, which allows custonmization of reports and ad-hoc exploration and analysis. Since the reports are not binary-compiled into the product, IBM can ship new COGNOS reports as templates outside the normal TPC release schedule. Also, TPC 5.1 got smarter on reporting on server virtualization hypervisor environments to avoid double-counting.
Recommendations - TPC 5.1 can analyze your usage patterns across the entire data center and make recommendations to move data from one storage tier to another. You can then act on these recommendations by moving data from one tier to another, either "up-tier" to faster storage, or "down-tier" to less expensive storage, using a storage hypervisor like IBM SAN Volume Controller. This is complementary to features like Easy Tier which optimize within a single disk system.
Performance - TPC 5.1 uses a new web-based GUI, based on AJAX, HTML5 and Dojo widgets, inspired by the IBM XIV GUI, and similar to the web-based GUI of SAN Volume Controller, Storwize V7000 and SONAS.
Mike also explained the new TPC 5.1 packaging. Instead of having a variety of components like "TPC for Disk", "TPC for Data", and "TPC for Replication", the new packaging simplifies this down to two levels of functionality. The basic level supports block-level devices, including disk performance, replication and SAN fabric management. The advanced level adds support for files and databases, including support for Cloud management such as SONAS environments.
Dan Zehnpfennig, Solution Architect, talked about his experiences installing TPC 5.1 and how this was much improved over previous TPC versions.
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy!
Well it's Tuesday again, and you know what that means... IBM announcements! Yesterday, at the IBM Edge conference here in Orlando, Florida, IBM announced its new apporach to storage, and a whole bunch of storage products, enhancements, and services. I will focus on some key ones here, and save the rest for next week.
IBM SAN Volume Controller (SVC) v6.4
The SVC is IBM's enterprise-class storage hypervisor. The latest software release, v6.4, can be installed on any SVC hardware, from the 2145-8F2 introduced back in 2005, to newer models like the 2145-CG8. Here are the key features:
Fibre Channel over Ethernet (FCoE) -- This is complete end-to-end support. For SVC units with 10GbE ports, these ports can be now be used for FCoE. This allows hosts to attach to SVC via FCoE, allows SVC node-to-node communication for clustering, and allows SVC to communicate to back-end devices via FCoE.
Real-Time Compression -- IBM ported over the patent Random Access Compression Engine (RACE) from the Real-Time Compression Appliances to SVC v6.4. This allows primary data, accessed via block-based protocols, to be compressed up to 80 percent. This feature is an extra priced feature by TB.
Non-Disruptive Volume move between I/O Groups -- If you don't already have SVC, you don't need to worry about this. For existing SVC customers, this allows volumes to be associated with two or more I/O groups, and that you can add or remove I/O groups non-disruptively. For example, if you want to move a volume from IOG1 to IOG2, then you add IOG2 to the list of I/O groups for the volume, let the multi-pathing software discover the additional paths, the remove IOG1, which then marks the previous IOG1 paths inactive. All this can be done while applications read and write data.
Dedicate FCP ports for Replication -- If you activate the two 10GbE Ethernet ports for FCoE, you can free up two FCP ports that you can dedicate for long-distance Metro Mirror or Global Mirror.
If you have SVC today, but are running an old release like v4.3 or v5.1, I recommennd you upgrade up to at least v6.2.05 release now. This release has been out for a year and is very stable, and serves as a great platform for a later upgrade to SVC v6.4.
IBM Storwize V7000 v6.4
The Storwize V7000 is IBM's midrange storage hypervisor. The latest software release, v6.4, can be installed on existing block-only Storwize V7000 units in the field. The Storwize V7000 v6.4 gets all the features listed above, as well as the following:
Four-way clustering -- Previously, you could cluster two Storwize V7000 controller enclosures together (4 canisters total). To cluster three or four controllers required an RPQ. Now, IBM supports up to four Storwize V7000 controller enclosures (8 canisters) without an RPQ.
Direct Fibre Channel attach -- A lot of people are using Storwize V7000 inside single-rack configurations, so it makes sense not to require a SAN switch for just a few Windows, Linux or VMware servers. An RPQ is now available to allow this to happen.
IBM Tivoli Storage Productivity Center (TPC) v5.1
TPC is already ranked one of the best Storage Infrastructure Management software in the market, and this release will just solidify its lead. Key features include:
Upward integration to higher level management systems
A new, intuitive, easy-to-use web-based GUI inspired by the XIV GUI
Integration of COGNOS to be able to generate and customize reports
Support for SONAS systems
There are several presentations on TPC this week that will go into more detail. Check out the [TPC Facebook page].
My latest book Inside System Storage: Volume IV is now available!
Yes, can you believe it? I have published my fourth volume in my "Inside System Storage" series! It is available in three formats:
Hardcover with dust jacket
eBook (Adobe Acrobat PDF)
You can order this, and all my other books, in all formats, directly from my [Author Spotlight] page. The paperback will also be available soon from other online booksellers, search for ISBN 978-1-105-72213-4.
IBM DS3500 Express
The DS3500 is our entry-level block-based device, designed specifically for random I/O workloads. This includes databases, email repositories, traditional business applications, and on-line transactional workloads. Here are the new features:
Dynamic Disk Pooling, similar to what XIV does to reduce disk rebuild times, but using a RAID-6 like approach per chunk of data.
Thin Provisioning using Dynamic Disk Pooling
Asynchronous Logical Unit Access (ALUA) failover
Enhanced FlashCopy, improved scalability, consistency groups and rollback support
VMware API for Array Integration (VAAI) support. This includes Write Same, Extended Copy, and Atomic Test & Set.
The DS3500 replaces the previous models of DS3200, DS3300 and DS3400 models.
The DCS3700 is our entry-level/midrange block-based device, replacing the DCS9900 model, designed specifically for sequential I/O workloads. This includes Big Data analytics, Hadoop, High Performance Computing (HPC), video surveillance, and television broadcasting. It holds 60 drives in a 4U controller enclosure.
This week I am in Orlando, Florida for the IBM Edge conference. Thursday evening after all the other sessions, we had a Free-for-All, a Q&A panel across all storage topics, moderated by Scott Drummond. The conference officially ends at noon tomorrow, but for many, this is the last session, as people fly out Friday morning. Here are the questions and the panel responses during the session.
When will IBM unify their storage management between Mainframe z/OS and the distributed systems platforms?
IBM offers a Change and Configuration Management Data Base (CCMDB) for this purpose with appropriate collectors from z/OS and distributed systems, but hasn't sold well.
When will IBM devices have RESTful interfaces?
Both IBM Systems Director and IBM Tivoli Storage Productivity Center (TPC) offer RESTful APIs. IBM Systems Director can manage z/VM and Linux on System z, as well as Power Systems and x86 based distributed systems. Since October 2008, IBM's Project Zero introduced RESTful interfaces to PHP and Groovy software running on WebSphere sMash environments. We have not heard much about this since 2008.
Will IBM TPC support NPIV on Power Systems?
TPC 5.1 has toleration support for this, showing the first port connection discovered, but not all connections, and we expect to retrofit this toleration to TPC 4.2.2 Fixpack 2. Hopefully, we will have full support in a future release.
We would like TPC for Replication to run on Linux for System z. We do not run z/OS at the disaster recovery site location.
Submit an IBM Request for Enhancement [RFE] for this. We have TPC for Replication on z/OS, as well as the distributed systems version that runs on Windows, Linux and AIX.
We have enhancements we would like to see for XIV and SONAS also, can we use the RFE process for this also?
Yes, submit the requirements for our review.
We heard the Statement of Direction that there would be storage integrated into the PureSystems. What exactly does that mean?
The PureSystems family of expert-integrated systems is based on a new chassis that has a front part, a midplane, and a back-part. All IBM System Storage products that support x86 and Power Systems can work with PureSystems. However, IBM does not yet offer storage that fits in the front part of the PureFlex chassis, but the Statement of Direction indicates that we intend to offer that option. Until then, the IBM Storwize V7000 is the storage of choice that can be put into the PureSystems rack, but outside the individual chasses.
We see some features like Real-Time Compression being put into the SAN Volume Controller (SVC), and other features put into the back-end devices. How are we supposed to make sense of this?
IBM's new pilot program, the SmartCloud Virtual Storage Center, to bring these all together. In general, we have design teams of system architects that determine which features go in which products, and prioritize accordingly.
We heard the IBM Executives during the opening session indicate that IBM's strategy involves supporting Big Data, but I haven't seen any storage that supports native Hadoop interfaces. Did I miss something?
First, I want to emphasize that Big Data is more than just MapReduce workloads. IBM offers Streams and BigInsights software to handle text, as well as Business Intelligence and Data Warehouse solutions for structured data. IBM's General Parallel File System (GPFS) has a Shared-Nothing-Cluster (SNC) mode with Hadoop interfaces that runs twice as fast as Hadoop's native HDFS file system. The storage products we recommend for Big Data are the SONAS and the DCS3700 disk systems, as both are optimized for the sequential workloads Big Data represents.
Everytime we upgrade our SVC, we review the list for SDDPCM multi-pathing and see that we need to upgrade our back-end DS8000 microcode up to recommended levels. Can we get a list of combinations that work from other customers?
The advantage of storage hypervisors like SVC is that we can separate the multi-pathing driver from the back-end managed disk systems. You only need the SDDPCM to support the SVC, not the back-end devices. For the most part, SVC has not dropped support for any level of previously supported OS or multi-pathing software.
On SVC, when we migrate volumes (vDisks) from one storage pool to another, we would like to throttle this process during FlashCopy.
Yes, we had several requests like this, which is why we now recommend using Volume Mirorring to perform migrations. In fact the GUI wizard uses Volume Mirroring by default when migrations are performed. As for throttling, IBM has implemented "I/O Priority Manager" that offers Quality of Service classes for DS8000 and XIV Gen3, and might consider porting this to other products in our portfolio.
Sizing systems is an art. I just need to know if the DS8000 is running hot. Can we have the equivalent of "red lines" for our disk systems similar to automobile engines?
Storage Optimizer was added to TPC 4.2 to help in this area, identifying heat-maps for IBM DS8000, DS6000, DS5000, DS4000, SVC and Storwize V7000. We recommend you look at the performance violation reports.
How can we evaluate the characteristics of our workloads?
Yes, TPC can do this.
When we are replacing non-IBM storage with IBM, we don't have good tools to evaluate the non-IBM equipment. What is IBM doing for this?
IBM's Disk Magic modeling tool can take inputs from a variety of sources, including iostat from the servers themselves. You can also install a 90-day trial of TPC to help with this.
We really like EMC's "Grab" program, does IBM have one also?
Updating the Host Attachment Kit (HAK) for AIX is quite painful for the SVC. We prefer the method employed for the XIV.
Thanks for the feedback.
For SVC, we need to correlate disk with VMware and VIOS. Can we get vSCSI information on VIOS?
TPC 5.1 has this support, and we believe it has been retrofitted to TPC 4.2.2 Fixpack 2, coming out this month.
Currently, with SVC, when volumes are part of a Global Mirror (GM) session, we need to cancel GM, expand the source volume, expand the target volume, then restart GM. We would like this to be fully automated and non-disruptive.
Sounds like a great requirement to submit for the RFE process.
Can we get an RSS Feed for the RFE community.
Yes, you can subscribe to it. You can also set up "Watch Lists".
Thanks to all of the IBM experts on the panel for their participation at this event!
Every year, I teach hundreds of sellers how to sell IBM storage products. I have been doing this since the late 1990s, and it is one task that has carried forward from one job to another as I transitioned through various roles from development, to marketing, to consulting.
This week, I am in the city of Taipei [Taipei] to teach Top Gun sales class, part of IBM's [Sales Training] curriculum. This is only my second time here on the island of Taiwan.
As you can see from this photo, Taipei is a large city with just row after row of buildings. The metropolitan area has about seven million people, and I saw lots of construction for more on my ride in from the airport.
The student body consists of IBM Business Partners and field sales reps eager to learn how to become better sellers. Typically, some of the students might have just been hired on, just finished IBM Sales School, a few might have transferred from selling other product lines, while others are established storage sellers looking for a refresher on the latest solutions and technologies.
I am part of the teach team comprised of seven instructors from different countries. Here is what the week entails for me:
Monday - I will present "Selling Scale-Out NAS Solutions" that covers the IBM SONAS appliance and gateway configurations, and be part of a panel discussion on Disk with several other experts.
Tuesday - I have two topics, "Selling Disk Virtualization Solutions" and "Selling Unified Storage Solutions", which cover the IBM SAN Volume Controller (SVC), Storwize V7000 and Storwize V7000 Unified products.
Wednesday - I will explain how to position and sell IBM products against the competition.
Thursday - I will present "Selling Infrastructure Management Solutions" and "Selling Unified Recovery Management Solutions", which focus on the IBM Tivoli Storage portfolio, including Tivoli Storage Productivity Center, Tivoli Storage Manager (TSM), and Tivoli Storage FlashCopy Manager (FCM). The day ends with the dreaded "Final Exam".
Friday - The students will present their "Team Value Workshop" presentations, and the class concludes with a formal graduation ceremony for the subset of students who pass. A few outstanding students will be honored with "Top Gun" status.
These are the solution areas I present most often as a consultant at the IBM Executive Briefing Center in Tucson, so I can provide real-life stories of different client situations to help illustrate my examples.
The weather here in Taipei calls for rain every day! I was able to take this photo on Sunday morning while it was still nice and clear, but later in the afternoon, we had quite the downpour. I am glad I brought my raincoat!
There is still time to enroll for [IBM Edge], a conference focused on storage, to be held June 4-8 in Orlando, Florida. There is an early-bird discount until May 6!
I will be there all week! Here are the seven sessions I will be presenting at the Technical Edge side of the event:
Understanding Your Options for Storing Archive Data to Meet Compliance Challenges
This session will cover the IBM software and hardware solutions that your organization can use to store archive data, including features like immutability, Write-Once-Read-Many (WORM) technology and Non-Erasable, Non-Rewriteable (NENR) enforcement. The discussion will include high-level concepts like chronological and event-based retention, litigation hold and release, as well as an overview of the products and solutions from IBM that you can deploy today.
IBM Watson: How it Works and What it Means for Society Beyond Winning Jeopardy!
In 2011, the IBM Watson computer was able to beat the top-earning human winners on the trivia game-show “Jeopardy!” As I was the author of [How to Build Your Own Watson Junior in Your Basement], I have been asked to explain how the IBM Watson system was put together, how it works, and what examples of text mining and big data analytics means for society as we apply technology to meet tomorrow's challenges.
Using Social Media for IBM System Storage - Birds of a Feather
I will be moderating this Birds of a Feather, or BOF, session that will bring together a Q&A panel of experts on how social media can be leveraged to help you do your job, get the information you need to solve problems, and share your knowledge with others.
Data Footprint Reduction: Understanding IBM Storage Efficiency Options
Data Footprint Reduction is the catch-all term for a variety of technologies designed to help reduce storage costs. In this session, I will cover thin provisioning, space-efficient copies, deduplication and compression technologies, and describe the IBM storage products that provide these capabilities.
IBM's Storage Strategy in the Smarter Computing Era
Confused about IBM's new initiatives for Big Data analytics, Workload Optimized Systems, and Cloud Computing? This session will explain it all, and how IBM's strategy for its various storage products and solutions fit into these overall themes.
IBM SONAS and the IBM Cloud Storage Taxonomy
Confused over the different types of cloud storage? IBM's scale-out Network Attached Storage (SONAS) can be used in a variety of use cases. This session will provide an overview of IBM's SONAS solution, provide an update on the latest features and functions recently announced, and explain how it can be deployed in various private, public and hybrid cloud environments.
IBM Tivoli Storage Productivity Center Overview and Update
IBM has enhanced its premier storage infrastructure management tool: IBM Tivoli Storage Productivity Center. This session will provide both an overview of the product, and explain the latest features and functions recently announced.
Well, it's Tuesday, and you all know what that means... IBM announcements!
This week, IBM announced the IBM Tivoli Storage Productivity Center for Disk Midrange Edition, affectionately referred to as "MRE". This is basically TPC for Disk but with two key differences:
A special license that covers only DS3000, DS4000, DS5000 series, whether natively attached or virtualized behind SAN Volume Controller.
A new pricing model based on the number on controllers and drawers, rather than by TB managed. For example, if you have a DS5300 and two expansion drawers, then you pay for three units of MRE. As you upgrade from smaller capacity disks to larger capacity disks, your license costs won't increase. This eliminates the quarterly hassle to "true up" your software licenses to match actual capacity that is required on TB-based licensing.
The "Storage Resource Agent" introduced for Linux, AIX and Windows in v4.1 is a lightweight agent, written in native "C" language instead of Java, to avoid all the resources that Java consumes. In this release, it is now supported for HP-UX and Solaris, and adds file level and database level storage resource management (SRM) reporting for all five platforms.
For new customer deployments, this will eliminate all the pain setting up a "Common Agent Manager". The Productivity Center server will send out the agent, the agent collects the data, and can then optionally uninstall itself. In this manner, you always have the latest version of the code collecting the data. For those with Common Agent Manager already installed, you can continue running as is, or slowly transition over to the new lightweight agent methodology.
Full support for IBM XIV Storage System
IBM XIV® Storage System support updated to include provisioning, data path explorer and performance management reporting. Before this release, Productivity Center could only discover and provide rudimentary capacity information for XIV systems. Now you can carve LUNs and monitor XIV disk performance just like you can with most other disk systems.
Storage Area Network (SAN) configuration planning
For those who have both Productivity Center Standard Edition (SE) and Productivity Center for Replication, the SAN Config Planner is now "replication-aware" and will add LUNs to existing copy sessions, or create new copy sessions, and ensure that the devices chosen meet the appropriate criteria.
HyperSwap™ for the IBM AIX® environment
On z/OS mainframes, if you experience an outage on a storage system, Productivity Center for Replication (TPC-R) can automatically swap to the synchronous mirror copy without disruption to the operating system or application. Now, IBM has extended this awesome feature to the AIX platform for high availability in POWER-based server environments.
Detailed Session Reporting for Global Mirror
Before, TPC-R enforced the notion of only one Global Mirror master per storage system. Now, TPC-R v4.2 is capable of supporting multiple Global MIrror sessions, and provide more detailed session reporting for these environments. This can be useful if for some unknown reason the bits are not being shoveled from point A to point B, and you need to do some "problem determination".
SVC Incremental FlashCopy
Productivity Center for Replication now adds support for the "Incremental" feature of SVC FlashCopy. While FlashCopy requests are processed instantaneously, there is background processing required that can consume cycles. Incremental processing keeps track of what changed since the last FlashCopy, and minimizes this behind-the-scenes overhead.
Integrated Distributed Disaster Recovery manager
IBM Tivoli System Automation Application Manager [TSA-AM] can now integrate with TPC-R to provide application-aware disaster recovery capability. This can coordinate between IBM Tivoli System Automation for Multiplatforms [TSA-for-MP], IBM HACMP/PowerHA, as well as other clustering products like Microsoft Cluster Services (MSCS) and Veritas Cluster Services on Solaris. When TSA-AM detects an outage, it can notify Globally Dispersed Parallet Sysplex Distributed Cluster Management (GDPS-DCM) to take action. This integration was actually completed with TPC v4.1 back in April, but got buried deep inside our big storage launch, so I bring it up again as a gentle reminder that IBM offers the best end-to-end management on the planet.
At last month's Storage University, I presented an overview of [Tivoli Storage Productivity Center v4.1]. Many of the questions were along the lines of "When will TPC do xyz?" and all I could answer was "Soon" since I knew they would be delivered with this TPC v4.2 release, but I couldn't provide any more details than that at the time.
It's Tuesday, and you know what that means... IBM Announcements!
IBM System Storage ProtecTIER
Today, IBM refreshed its IBM System Storage ProtecTIER data deduplication family with new hardware and software. On the hardware side, The [TS7650G gateway] now has 32 cores and 64GB RAM. The [TS7650 Appliance] now has 24 cores and 64GB of RAM, and the [TS7610 Appliance Express] has 4 cores and up to 16GB of RAM.
On the software side, all of these now support Symantec's proprietary "OpenStorage" OST API. This applies across the board, from the [Enterprise Edition], [Appliance Edition], and the [Entry Edition]. For those using Symantec NetBackup as their backup software, the OST API can provide advantages over the standard VTL interface.
IBM Systems Director Storage Control
The second announcement has an interesting twist. I could file this in my "I Told You So" folder. Offiically, it's called the [Cassandra Complex], where you accurately predict how something will turn out, but being unable to convince anyone else of what the future holds.
About ten years ago, I was asked to be lead architect of a new product to be called IBM TotalStorage Productivity Center, which was later renamed to IBM Tivoli Storage Productivity Center. This would combine three projects:
Tivoli Storage Resource Manager (TSRM)
Tivoli SAN Manager (TSANM)
Multiple Device Manager (MDM)
The first two were based on Tivoli's internal GUI platform, and the MDM was a plug-in for IBM Systems Director. I argued that administrators would want everything on a single pane of glass, and that we should bring all the components under a common GUI platform, such as IBM Systems Director. Unfortunately, management did not agree with me on that, and preferred instead to leave each interface alone to minimize development effort. The only "unification" was to give them all similar sounding names, four components packaged as single product:
Productivity Center for Data (formerly TSRM)
Productivity Center for Fabric (formerly TSANM)
Productivity Center for Disk (formerly MDM)
Productivity Center for Replication (formerly MDM)
While this management decision certainly allowed version 1 to hit the market sooner, this was not a good "first impression" of the product for many of our clients.
In 2002, IBM acquired Trellisoft, Inc. which replaced the internally-developed TSRM with a much better interface, but again, this was different GUI than the other components. A "launcher" was created that would launch the various disparate interfaces for each component for Version 2. At this point, we have different development teams scattered in five locations, with the first two components being developed by the Tivoli software team, and the other two components being developed by the System Storage hardware team.
Often times, when a technical lead architect and management do not agree, things do not end well. The lead architect has to leave the product, and management is forced to take alternative actions to keep the product going. In my case, management considered the idea of a common GUI as an expensive "nice-to-have" luxury we could not afford, but I considered this a "must-have". I moved on to a new job within IBM, and management, unable to continue without my leadership, gave up and handed the entire project over to the Tivoli Software team.
The Tivoli Software team took a whiff at the pile of code and agreed that it stunk. Dusting off my original design documents, they pretty much discarded most of the code and re-wrote much from scratch, with a common database, common app server, and common GUI platform. Unfortunately, Productivity Center for Replication was held up waiting for some hardware prerequisites, but the other three components would be packaged together as "Productivity Center v3 - Standard Edition" and was a big improvement over the prior versions.
In Version 4, TotalStorage Productivity Center was renamed to Tivoli Storage Productivity Center, and the Replication component was brought into the mix. A scaled-down version packaged as Productivity Center "Basic Edition" was made available as a hardware appliance named "System Storage Productivity Center" or SSPC. The idea was to provide a pre-installed 1U-high hardware console that had the basic functions of Productivity Center, with the option to upgrade to the full Tivoli Storage Productivity Center with just license keys.
So, now, years later, management recognizes that a common GUI platform is more than just a "nice-to-have". IBM now support three very specific use cases:
1. Administration for a single product
For small clients who might have only a single IBM product, IBM is now focused on making the GUI browser-based, specifically to work with the Mozilla Firefox browser, but any similar browser should work as well. The new IBM Storwize V7000 GUI is a good example of this.In this case, the browser serves as the common GUI platform.
2. Administration for both servers and storage devices
For mid-sized companies that have administrators managing both servers and storage, IBM announced this month the new [IBM Systems Director Storage Control v4.2.1] plug-in, which provides Tivoli Storage Productivity Center "Basic Edition" support. This allows admins already familiar with IBM Systems Director for managing their servers to also manage basic storage functions. This is the "I Told You So" moment, connecting server and storage administration under the IBM Systems Director management platform makes a lot of sense, it did when I came up with the idea 10 years ago! Hmmmm?
3. Administration for just the storage environment
For larger companies big enough to have separate server and storage admin teams, IBM continues to offer the full Tivoli Storage Productivity Center product for the storage admins. The most recent release enhanced the support for IBM DS8000, SVC, Storwize V7000 and XIV storage systems.
Today, analysts consider IBM's [Tivoli Storage Productivity Center] one of the leading products in its category. I am glad my original vision has finally come to life, even though it took a while longer than I expected.
To learn more about IBM storage hardware, software or services, see the updated [IBM System Storage] landing page.