Safe Harbor Statement: The information on IBM products is intended to outline IBM's general product direction and it should not be relied on in making a purchasing decision. The information on the new products is for informational purposes only and may not be incorporated into any contract. The information on IBM products is not a commitment, promise, or legal obligation to deliver any material, code, or functionality. The development, release, and timing of any features or functionality described for IBM products remains at IBM's sole discretion.
Tony Pearson is a an active participant in local, regional, and industry-specific interests, and does not receive any special payments to mention them on this blog.
Tony Pearson receives part of the revenue proceeds from sales of books he has authored listed in the side panel.
Tony Pearson is not a medical doctor, and this blog does not reference any IBM product or service that is intended for use in the diagnosis, treatment, cure, prevention or monitoring of a disease or medical condition, unless otherwise specified on individual posts.
Tony Pearson is a Master Inventor and Senior Software Engineer for the IBM Storage product line at the
IBM Executive Briefing Center in Tucson Arizona, and featured contributor
to IBM's developerWorks. In 2016, Tony celebrates his 30th year anniversary with IBM Storage. He is
author of the Inside System Storage series of books. This blog is for the open exchange of ideas relating to storage and storage networking hardware, software and services. You can also follow him on Twitter @az990tony.
(Short URL for this blog: ibm.co/Pearson
Now that the frozen economy is starting to thaw, I have been traveling like crazy this month. So far, I have been to Rochester, MN, Los Angeles and San Diego, CA, and now currently in Austin, TX. On the plus side, I was able to enjoy the [Fourth of July] holiday weekend on the beaches of San Diego.
(If you have not been to California beaches lately, here's a quick [video] reminder)
So the big news this week is that the auction over Data Domain is over, and EMC's bid finally won over NetApp. Both NetApp and EMC have data deduplication capabilities in their existing product lines, but neither could compete against IBM's TS7650G ProtecTIER Data Deduplication gateway and TS7650 ProtecTIER appliances, and so were hell-bent to buy Data Domain for large amounts. The final price agreed upon was over two billion US dollars for Data Domain.
For the most part, Data Domain's products are targeted towards small and medium sized businesses, whereas IBM's TS7650 and TS7650G products targets medium and larger sized enterprises.So now that EMC has a viable data deduplication solution, it looks like it will be yet another IBM-vs-EMC debate going forward.
Continuing this week's theme of doing important things without leaving town, I present our results foran exciting project I started earlier this year.
For seven weeks, my coworker Mark Haye and I voluntarily led a class of students here in Tucson, Arizona in an after-school pilot project to teach the ["C" programming language] using [LEGO® Mindstorms® NXT robots]. The ten students, boys and girls ages 9 to 14 years old, were already part of the FIRST [For Inspiration and Recognition of Science and Technology] program, and participated in FIRST Lego League[FLL] robot competitions.Since the students were already familiar building robots, and programming them with a simple graphical system of connecting blocks that perform actions. However, to compete in the next level of robot competitions, FIRST Tech Challenge [FTC],we need to leave this simple graphical programming behind, and upgrade to more precise "C" programming.
Mark is a software engineer for IBM Tivoli Storage Manager and has participated in FLL competitions over the past nine years. This week, he celebrates his 25th anniversary at IBM, and I celebrate my 23rd. The teacher, Ms. Ackerman, and the students referred to us as "Coach Mark" and "Coach Tony".
This was the first time I had worked with LEGO NXT robots. For those not familiar with these robots, you can purchase a kit at your localtoy store. In addition to regular LEGO bricks, beams, and plates, there are motors, wheels, and sensors. A programmable NXT brick has three outputs (marked A,B, and C) to control three motors, and four inputs (marked 1,2,3,4) to receive values from sensors. Programs are written and compiled on laptops and then downloaded to the NXT programmable brick through an USB cable, or wirelessly via Bluetooth.
In the picture shown, an image of the Mars planetary surface is divided into a grid with thick black lines.A light sensor between the front two wheels of the robot is over the black line.
We used the [RobotC programming firmware] and integrated development environment (IDE) from [Carnegie Mellon University].The idea of this pilot was to see how well the students could learn "C". With only a few hours after class on each Wednesday, could we teach young students "C" programming in just seven weeks?
My contribution? I have taught both high school and college classes, and spent over 15 years programming for IBM, so Mark asked me to help.We started with a basic lesson plan:
A brief history of the "C" language
Understanding statements and syntax
Setting motor speed and direction
Compiling and downloading your first program
Understanding the "while" loop
Retrieving input sensor values
Understanding the "if-then-else" statement
Defining variables with different data types
Manipulating string variables
Writing a program for the robot to track along a black line on a white background.
Understanding local versus global scope variables
Writing a program for a robot to count black lines as it crosses them.
Perform left turns, right turns, and to cross a specific number of lines on a grid pattern to move the robot to a specific location.
Weeks 6 and 7
Mission Impossible: come up with a challenge to make the robot do something that would be difficult to accomplish using the previous NXT visual programming language.
At the completion of these seven weeks, I sat down to interview "Coach Mark"on his thoughts on this pilot project.
This is a practical programming skill. The "C" language is used throughout the world to program everything from embedded systems to operating systems, and even storage software. This would allow the robots to handle more precise movements, more accurate turns, and more complicated missions.
Can kids learn "C" in only seven weeks?
Part of the pilot project was to see how well the students could understand the material. They were already familiar with building the robots, and understood the basics of programming sensors and motors, so we were hoping this was a good foundation to work from. Some kids managed very well, others struggled.
Did everything go according to plan?
The first two weeks went well, turning on motors and having robots move forward and backward were easy enough. We seemed to lose a few students on week 3, and things got worse from there. However, several of the students truly surprised us and managed to implement very complicated missions. We were quite pleased with the results.
What kind of problems did the kids encounter?
Touch sensor required loops waiting for pressing. Motors did not necessarily turn as expected until more advanced methods were used. Making 90 degree left and right turns accurately was more difficult than expected.
Any funny surprises?
Yes, we had a Challenge Map representing the Mars planetary surface from a previous FLL competition that was dark red and divided into squares with thick black lines. An active light sensor returns a value of "0" (complete darkness) to "100" (bright white).However, the Mars surface had craters that were dark enough to be misinterpreted as a black line causing some unusual results. This required some enhanced programming techniques to resolve.
Did robots help or hurt the teaching process?
I think they helped. Rather than writing programs that just display "Hello World!" on a computer screen, the students can actually see robots move, and either do what they expect, or not!
And when the robots didn't do what they were expected to?
The students got into "debug" mode. They were already used to doing this from previous FLL competitions, but with RobotC, you can leave the USB cable connected (or use wireless Bluetooth) and actually gather debugging information while the robot is running, to see the value of sensors and other variables and help determine why things are not working properly.
Any applicability to the real world of storage?
We have robots in the IBM System Storage TS3500 tape library. These robots scan bar code labels, pull tapes out of shelves and mount them into drives.The programming skills are the same needed for storage software, suchas IBM Tivoli Storage Manager or IBM Tivoli Storage Productivity Center.
The world is becoming smarter, instrumented with sensors, interconnected over a common network, and intelligent enough to react and respond correctly. The lessons of reading sensor values and moving motors can be considered the first step in solutions that help to make a smarter planet.
This week I am in Costa Rica to celebrate[Earth Day] and promote IBM's [Smarter Planet strategy] to help solve the world's energy and environmental problems. This is thethird in the series. The first two posts were:
Here in Costa Rica, they separate their recyclables, and encourage even the hotel guests from other countries to do the same. See my photo on the left for an example.
This is more than most in the United States will do. We're lucky to get North Americans to just separate all recyclables in one bin separate from all trash in a second bin.
Leaving Arenal, I went to Escazu, a suburb of San Jose, the capital of this country. I met with Patrick, one of the owners of [Exclusive Excursions Travel] that helped me organize the eco-tourism portion of this trip to Costa Rica.
Most people are familiar with the [star rating system] that rank most hotels from one star (budget class/economy) to five stars (deluxe/luxury). The nicest hotel I've been to was the [Burj Al Arab] in Dubai, which claims a seven star rating. For eco-tourism, there is a similar "Green Leaf" rating system. According to Patrick,the Instituto Costarricense de Turismo [ICT] (tourism board of Costa Rica) rates hotels from one leaf (adopting some measures, like separating recyclables shown above) to five leaves (entirely carbon neutral).This Green Leaf system seems more important to European and Canadian tourists, but those from United States may not even be aware of it.
The food at these hotels vary. The typical dish here for breakfast, lunch and dinner is the Casado, consisting of mostly rice and beans. I have found thatCosta Rica has come up with as many creative ways to combine rice and beans in various proportions as Starbucks® serve various combinations of coffee and milk.The locals might be accustomed to a steady diet of rice and beans for every meal of every day, but those of us from North America aren't! Not counting tourist flatulence, Costa Rica has[pledged to be carbon neutral by 2021], the country's 200th birthday.
Sadly, most folks in the United States don't categorize their hotels with a Green Leaf rating system, nor do they even bother to categorize their recyclables. I spent 18 months in the field doing Information Lifecycle Management (ILM) assessments for clients, and most didn't categorize their data either.So, the next time you have some combination of coffee and milk, whether its a Latte, Misto, Espresso, or Macchiato, remember that the coffee came from acountry trying to be more environmentally responsible, grown by a farmerwho eats a simple diet of rice and beans, and has no problem separating different categories of recyclables. Perhaps you will remember to separate your data, and store it on an information infrastructure based on an environmentally-responsible combination of SSD, FC, SATA and tape, to reduce your costs and minimize your carbon footprint.
With mixed emotions, Jon Peake announced he will retire from IBM next week. Jon is known as thefather of IBM Virtual Tape Server (VTS), the industry's first virtual tape system, announced in 1996and generally available in 1997.One of my 19 patents was for the VTS pre-migration capability, and as lead architect for DFSMS, I worked closely with Jon and his tape systems team to ensure its success.
From left to right:
Chris Telford, IBM Development manager for Enterprise Tape Integration
Jon Peake, IBM Distinguished Engineer and Master Inventor
Annette Estelle, Jon's global admin assistant
At his retirement celebration, Jon was awarded the coveted "Project Bulldog" jacket, which has an interesting history.
In response to IBM's 1996 VTS announcement, the top StorageTek (STK) tape sales teams and most of the dedicated tape technicians were invited to a global assembly at a fancy resort in Winter Park, CO (about 90 miles west of STK's Louisville headquarters) in early 1997. The gathering was named Project Bulldog, after Ron Korngiebel, STK's director of competitive marketing, who I am told had voice and facial resemblance to justify the project moniker. Ron had recruited Fred Moore, Steve Blenderman, and other prized engineers as speakers. I have seen both Fred and Steve speak at various conferences such as SHARE and GUIDE, and agree they are high quality speakers.
The goal was to have STK's brightest in Louisville go down in the trenches, work the field guys into a frenzy, defend STK Tape at any cost, and send IBM packing. At the end of the two day fest, many participants received the coveted Project Bulldog jacket.
Former STKers who now work at IBM can remember this meeting involved:
Bashing of the [IBM Seascape] architecture approach. The use of commodity servers and componentsto build storage systems continues today in the IBM System Storage DS8000, SAN Volume Controller,XIV, and TS7650 Deduplication solutions.
Explanations how and why IBM's VTS would never work, and how only STK virtual tape would make it in the market. Today, IBM is the leader in storage virtualization, both for disk and tape.
Mock interview videos with claims that IBM could never figure out how to attach IBM drives to the STK Silo. I was a big proponent of this, having visited customers who specifically asked for IBM to sell its better, faster IBM drives into their existing STK silos. At first, upper management was hesitant to do this, but the IBMengineers worked out what changes were needed, and today many STK tape automation libraries run with IBM tape drives.
While some analysts frowned on Sun's [2005 acquisition of StorageTek], IBM was delighted, given Sun's previous track record in storagecompany acquisitions. I joke that we are still picking up confetti in the hallways of IBM's Tucsonlab. I was in New York city when I heard Sun's announcement, and it didn't take long for STKemployees offering me their resumes.Since then, many STK engineers, technicians and sales team have left Sun, many coming over to IBM.Back then, there were many intelligent and talented people working for StorageTek, and IBM is gladto have hired them.
With the resurgence of interest in tape systems, from dealing with new legislation for long term retention of electronic data to a focus on energy efficiency, Jon leaves much like a champion retiring at the top of his game.
Jon, I am going to miss you! Enjoy your retirement!
These disk capacities can have up to 25x times their effective capacity with IBM's HyperFactorin-line deduplication capability. So the smallest 7TB model could be as effective as 175TB of traditionaldisk storage.
IBM Tivoli Storage Manager (TSM) v6
After years and years in development, IBM announces[TSM v6]. Here's a quick summary of the key features:
DB2 instead of an internal database
For years, people have complained that IBM used its own internal relational database. This was becausewhen TSM was first launched back in 1993, the DB2 did not have all the features on all of the various server platforms that TSM needed. Today, DB2is the leading relational database on all the key platforms that TSM server runs on, and therefore good enough for use within Tivoli Storage Manager. If you don't already have DB2, it is included for use with TSM v6.1 at no additional charge. Do you have to become a DB2 expert to use TSM? No! The TSM administration commands have been updated to hide all the complexity of DB2 away, behind the scenes. You now just use TSM commands to administer the database,as you did before. IBM will provide conversion utilities to help existing TSM customers migrate to thisnew database environment.
Better Operational Reporting
Another big complaint was that TSM had fixed reporting, and administrators that wanted customized reportsoften had to resort to purchasing third party products. With the change over to DB2, TSM now enables youto create your own reports using Eclipse's Business Intelligence and Reporting Tools[BIRT]! If you haven't used BIRT, you can downloada free open source copy and start playing around with its capabilities. This is combined with a revamped GUI that provides a customizable dashboard using IBM's Integrated Solutions Console (ISC)infrastructure.
Lastly, IBM has incorporated deduplication capability within the TSM v6.1 software for its own diskstorage pools. This is done in a post-process manner so as to dedupe all of your legacy backup dataas well, not just the new stuff, without impacting the current TSM server performance.
At this point, you might be thinking "Wait, what about IBM TS7650 ProtecTIER deduplication?" which is really two questions.
Can I use TSM v6.1 with IBM TS7650 ProtecTIER?
Yes, however since TSM progressive incremental method is vastly more efficientthan other backup products like Veritas NetBackup or EMC Legato NetWorker, the TS7650 may only get 10x reductionof TSM backups, versus up to 25x with full-backups-every-night backup schemes. TSM only dedupes itsdisk storage pools, so it won't dedupe data directed at tape systems like the TS7650 or othertape libraries. This avoids the "double dedupe" concern.
When should I use TSM's software version versus TS7650's hardware deduplication?
This is a positioning question. For now, the cut-over point is about 10TB per night backup processing. If youbackup more than 10TB per night, TS7650 hardware may be the better approach. If you are a smaller customer nowhere near that volume of data, then using TSM v6.1 software deduplication may be a morecost-effective solution. If you start small, and grow beyond 10TB per night, it is easy to bring ina TS7650 into an existing TSM environment and migrate the data over.
If you run TSM server on a logical partition (LPAR) or virtual guest OS under VMware ESX, Xen or Microsoft'sHyper-V environment, why should you have to license it for the whole box? With TSM v6.1, you nowcan pay for only the amount of processors you use, down to a single core even.If you currently run TSM v5 on z/OS, you can migrate over to TSM v6.1 server for Linux on System z totake advantage of cost savings using IFL engines.
IBM Tivoli Key Lifecycle Manager (TKLM) v1.0
Don't let the "v1.0" scare you, this is the successor to IBM's Encryption Key Manager (EKM) that hasthousands of clients using today with IBM encrypting tape drives. The new TKLM adds support for full disk encryption (FDE) drives--like those for the DS8000 I mentioned in [yesterday's post]--as well as new features to support key rotation for compliance and business controls.
IBM Tivoli Storage Productivity Center
Last, but not least, we have IBM Tivoli Storage Productivity Center [TSPC]. No, that is not a typo. IBM is renaming IBM TotalStorage Productivity Center to Tivoli Storage Productivity Center toavoid trademark conflicts with the [Professional Golfer's Association].
This is not just renaming existing product. Here some key improvements:
TSPC brings back together Productivity Center Standard Edition (Disk, Tape, SAN and Data) with Productivity Center for Replication, which were separate at birth a few years ago.
TSPC adds support for IBM's Storage Enterprise Resource Planner[SERP] from theNovusCG acquisition.
End-to-end view for EMC storage devices connected to supported servers via EMC Powerpath multipathing driver. As customers switch away from EMC Control Center over to IBM's Productivity Center, IBM can continue to provide support for existing EMC gear.
Of course, IBM will still offer IBM System Storage Productivity Center[SSPC] which is a piece of hardware pre-installed with Productivity Center software.
Hopefully, you can now see why I had to split up all these announcements into separate posts acrossmultiple days!
We've been quite busy here at the Tucson Executive Briefing Center. I am often asked to explain the relationship between IBM's various storage products. While automakers don't have to explain why they sell sports coupes, pickup trucks and minivans, this analogy does not adequately cover IT storage products. So, I have come up with a new analogy that seems to be a better fit: foundations and flavorings.
All over the world, meals are often comprised of a foundation, perhaps rice, potatoes or pasta, covered with some form of flavoring, sauces, pieces of meat or fish, grated cheese and spices. In Puerto Rico, I had dishes where the foundation was mashed bananas called [plantains]. Sandwich shops often let you pick your choice of bread, the foundation, and then your meats and cheeses, the flavorings.At our local steakhouse,[McMahon's], the menulists a set of steaks, the foundation such as Rib Eye, Filet Mignon, Prime Rib or New York Strip, andvarious flavorings, such as sauces and rubs to cover the steak. Last night, I had the Delmonico steak with the Cristiani sauce consisting of Portobello mushrooms, garlic and aged Romano cheese.
This serves as a useful analogy for IBM's storage strategy. Allowing thefoundations and flavorings to be separately orderable greatly simplifies the selection menu and providesa nearly any-to-any approach to meeting a variety of client needs.Let's take a look at both.
IBM's foundation products are the DS family [DS3000, DS4000, DS5000, DS6000 and DS8000 series], [DS9900 series], and [XIV] for disk, and the TS family [TS1000, TS2000, TS3000] series for tape drives and libraries. In much thesame way you might prefer brown rice instead of white rice, or linguine instead of penne pasta, you might find the attributes of one storagefoundation more attractive based on its performance, scalability and availability features for yourparticular application workloads.
Fellow IBM blogger Barry Whyte discusses SVC at great length on his [Storage Virtualization] blog. Flavoring disk foundation storage with SAN Volume Controller can provide you additionalfeatures and functions, and help improve the scalability, performance or availability characteristics.For example, if you have DS4000, DS8000 and XIV, you might use SVC to provide a consistent methodologyfor asynchronous replication, a form of consistent "flavoring" if you will.
N series Gateways
The [N series gateways] offerflavoring to disk foundation, including unified NAS, iSCSI and FCP protocol host attachment, and application aware capabilities. (As for our IBM N series appliances or "filers", these could be foundational storage behind an SVC, but that's perhaps a topic for another post.)
SoFS provides a global namespace with clustered NAS access to files. This is a blended disk-and-tape solution with built-in backup and Information Lifecycle Management [ILM]. Policies can be used to place different files onto different tiers of storage, automate the movement from tier to tier, including migration to tape, and even expiration when the data is no longer needed.
The [IBM System Storage DR550] provides Non-erasable, Non-rewriteable (NENR) flavoring to storage. While the DR550 comes with internal disk storage, it can front end a tape library filled with WORM cartridges. The DR550 hasbeen paired up with small libraries (TS3200 or TS3310) as well as larger libraries like the TS3500.
The IBM Grid Medical Archive Solution [GMAS] provides a variety of capabilities for storing and accessing medical images, using a blended disk-and-tape approach. This allows hospital and clinicnetworks to provide access for doctors and radiologists from multiple locations.
Many of the flavorings are called "gateways". The IBM TS7650G flavors disk that provides a virtualtape library[VTL] with inline data deduplication capability. Recent performance tests pairing the TS7650G flavoring with XIV foundation storage found this combination to be an excellent match.
Let me know what you think. Does this help you understand IBM's storage strategy and acquisitions? Enteryour comments below.
Lagasse, Inc. sells janitorial supplies, such as mops, cleaning chemicals, waste receptacles, and garbage can liners. Of the 1000 employees of Lagasse nationwide, about 200 associates were located in New Orleans at their main Headquarters, primary customer care center, and primary IT computing center.
Amazingly, Lagasse did not have a formally documented BCP (Business Continuity Plan) but more of aBCI (Business Continuity Idea). They chose to take a ["donut tire"] approach, putting older previous-generation equipment at their DR site. They knew that in the event of a disaster,they would not be processing as many transactions per second. That was a business trade-offthey could accept.
Evaluating all the different threat scenarios for impact and likelihood, and focused on hurricanes and floods.They had experienced previous hurricanes, learning from each,with the most recent being 2004 Hurricane Ivan and 2005 Hurricane Dennis. From this, they wereable to categorize three levels of DR recovery:
Tier 1 - The most mission-critical, which for them related to picking, packing and shipping products.
Tier 2 - The next most important, focused on maintaining good customer service
Tier 3 - Everything else, including reporting and administrative functions
The time-line of events went as follows:
The US Government issues warning that a hurricane may hit New Orleans
August 27 - 7pm
Lagasse declares a disaster, starts recovery procedures to an existing IT facility in Chicago, owned by their parent company. A temporary "Southeast" Headquarters were set up in Atlanta.Remote call centers were identified in Dallas, Atlanta, San Antonio, and Miami.
August 28 - just after midnight
In just five hours, they recovered their "Tier 1" applications.
August 28 - 7:30pm
In just over 24 hours, they recovered their "Tier 2" applications.
August 29 - 6am
The Hurricane hits land. With 73 levees breached, the city of New Orleans was flooded.
The following week
Lagasse was fully operational, and recorded their second and third best sales days ever.
I was quite impressed with their company's policy for how they treat their employees during a disaster. For many companies, people during a disaster prioritize on their families, not their jobs.If any associate was asked to work during a disaster, the company would take care of:
The safety of their family
The safety of their pets. (In the weeks following this hurricane, I sponsored people in Tucson to go to New Orleans to attend to lost and stray dogs and cats, many of which were left behind when rescuers picked up people from their rooftops.)
Any emergency repairs to secure the home they leave behind
Marshall felt that if you don't know the names of the spouse and kids of your key employees, you are not emotionally-invested enough to be successful during a disaster.
For communications, cell phones were useless. They could call out on them, but anyone with acell phone with 504 area code had difficulty receiving calls, as the calls had to be processedthrough New Orleans. Instead, they used Voice over IP (VoIP) to redirect calls to whichever remote call center each associate went to. Laptops, Citrix, VPN and email were considered powerful tools during this process. They did not have Instant Messaging (IM) at the time.
While the disk and tapes needed to recover Tiers 1 and 2 were already in Chicago, the tapes for Tier 3 were stored locally by a third-party provider. When Lagasse asked for thier DR tapes back, the third-party refused, based on their [force majeure] clause. Force majeure is a common clause in many business contracts to free parties from liabilityduring major disasters.Marshall advised everyone to strike out any "force majeure" clauses out of any future third-party DR protection contracts.
Hurricane Katrina hit the US hard, killing over 1400 people, and America still has not fully recovered. The recovery of thecity of New Orleans has been slow. Massive relocations has caused a deficit of talent inthe area, not just IT talent, but also in the areas of medicine, education and other professions. The result has been degraded social services, encouraging others to relocate as well. Some have called it the "liberation effect", a major event that causespeople to move to a new location or take on a new career in a different field.
On a personal note, I was in New Orleans for a conference the week prior to landfall, and helped clients with their recoveries the weeks after. For more on how IBM Business Continuity Recovery Services (BCRS) helped clients during Hurricane Katrina, see the following [media coverage].
The title of this post is inspired by Baxter Black's [latest book]. Rathera recap of the break-out sessions, I thought I would comment on a fewsentences, phrases or comments I heard in the afternoon and evening.
Stop buying storage from EMC or NetApp
The lunch was sponsored by Symantec. Rod Soderbery presented "Taking the cost out ofcost savings", explaining some ideas to reduce IT costs immediately.
First, he suggested to "stop buying storage" from EMC or NetApp that charge a premiumfor tier-one products. Instead, Rod suggested that people should "think like a Web company"and buy only storage products based on commodity hardware to save money, and to use SRM software to identify areas of poor storage utilization. IBM's TotalStorage Productivity Center softwareis often used to help with this analysis.
His other suggestions were to adopt thin provisioning, data deduplication, and virtualization.The discussion at my table started with someone asking, "How do we adopt those functions without buying new storage capacity with those features already built-in?" I explained that IBM's SAN Volume Controller (SVC),N series gateways, and TS7650G ProtecTIER virtual tape gateway can all provide one or moreof these features to your existing disk storage capacity.
IBM and HP are leaders in blade servers
In the session "Future of Server and OS: Disappearing Boundaries", the audience confirmedby electronic survey that IBM and HP are the leaders in blade servers, although blades representonly 8-10 percent of the overall server market.
Interestingly, 22 percent of the audience has deployed both x86 and non-x86 (POWER, SPARC, etc.) blade servers.The presenters considered this an interesting insight.
Another survey of the audience found that 3 percent considered Sun/STK as their primary storagevendor. One of the presenters was delighted that Sun is still hanging in there.
IBM Business Partners deliver the best of IBM and mask the worst
Elaine Lennox, IBM VP, and Mark Wyllie, CEO of Flagship Solutions Group, Inc. presentedIBM-sponsored back to back sessions. Elaine presented IBM's vision, the New Enterprise Data Center, and the challenges that demand a smarter planet.
Mark focused on his company's experience working with IBM through Innovation Workshops. Theseare assessments that can help someone identify where you are now, where you want to be, andthen action plans to address the gaps.
Cats and Dogs, Oil and Water, Microsoft Windows and Mission-critical applications, what do all of these have in common?
NEC Corporation of America sponsored some sessions on some x86-based solutions they have to offer.The first part, titled "Rats Nests, Snow Drifts and Trailers" focused unified storage, andthe second part, presented by Michael Nixon, focused on how to bring Microsoft Windows servers into the data center for mission-critical applications.
The Economy might be slowing, but storage is still growing
Two analysts co-presented "The Enterprise Storage Scenario". Unlike computing capacity, thereis no on/off switch for storage, not from applications nor from end-users. The cost ofpower for storage is expected to be 3x by 2013. Virtual servers, includingVMware and Microsoft's Hyper-V will drive the need for shared external disk storage.A survey of the audience found 20 percent were expecting to purchase additional storagecapacity 4Q08.
When someone reaches age 52, they expect to coast the rest of their career
At dinner with analysts, the discussion of financial meltdown and bailouts is unavoidable,including everyone's views about the proposed bailout of the Big 3 automakers. I can'tdefend Ford, GM and Chrysler paying their people $70 US dollars per hour, when their UScounterparts at Toyota or Honda are only paid $45 to $50 dollars per hour.
However, I have a close friend who retired after 20 years working for the fire department,and a cousin who retired after 20 years serving in the Navy (the US Navy, not the BolivianNavy), and both are still in their forties in age. A long time ago, IT professionalsretired after 30 years, in some cases with 50 to 60 percent of their base pay as theirpension for the rest of their lives. A 52-year-old that has worked 30 years might expect to enjoy the rest of his old age playing golf and pursuing other hobbies. This is not "coasting", it is called "retirement". The few of my colleagues that I have seen who worked 35 to 40 years did so becausethey enjoyed the challenge of work at IBM. They enjoyed solving tough engineering problems and helping customers.As long as they were having fun on the job,IBM was glad to keep their wealth of experience on board and actively engaged.
Unfortunately, many people rely on their own investments in the stock market for retirement, ratherthan company pensions. With the current financial crisis, I suspect many people my age arereconsidering their previous retirement plans.
We're going to need more trains!
I took the monorail back to my hotel. The ride includes funny announcements and statistics,including this gem:
"Since 1940, Las Vegas has doubled in population every ten years, which means thatby the year 2230, we will have over 1 trillion people calling Las Vegas home. We're goingto need more trains!"
That wraps up Tuesday, Day 2 of my attendance here! Now for some sleep.
Well it's Tuesday, and ["election day"] here in the USA, and again IBM has more announcements.
IBM announced [IBM Tivoli Key Lifecycle Manager v1.0] (TKLM) to manage encryption keys. This provides a graphical interface to manage encryption keys, including retention criteria when sharing keys with other companies.
TKLM is supported on AIX, Solaris, Windows, Red Hat and SUSE Linux. IBM plans to offer TKLM forz/OS in 2009. TKLM can be used with Firefox or Internet Explorer web browser. This will include the Encryption Key Manager (EKM) that IBM offered initially to support encryption keys for the TS1120, TS1130, and LTO-4 drives.
While this is needed today for tape, IBM positions this software to also manage the encryption keys for "Full Drive Encryption" (FDE) disk drive modules (DDM) in IBM disk systems in 2009.
There's some good discussion in the comments section over at Robin Harris' StorageMojo blog for hispost [Building a 1.8 Exabyte Data Center].To summarize, a student is working on a research archive and asked Robin Harris for his opinion. The archive will consist of 20-40 million files averaging 90 GB in size each, for a total of 1800 PB or 1.8 EB. By comparison, anIBM DS8300 with five frames tops out at 512TB, so it would take nearly 3600 of these to hold 1.8 EB. While this might seem like a ridiculous amount of data, I think the discussion is valid as our world is certainly headed in that direction.
IBM works with a lot of research firms, and the solution is to put most of this data on tape, with just enough disk for specific analysis. Robin mentions a configurion with Sun Fire 4540 disk systems (aka Thumper). Despite Sun Microsystems' recent [$1.7 Billion dollar quarterly loss], I think even the experts at Sun would recommend a blended disk-and-tape solution for this situation.
Take for example IBM's Scale Out File Services [SoFS] which today handles 2-3 billion files in a single global file system, so 20-40 million would present no problem. SoFS supports a mix of disk and tape, with built-in movement, so that files that were referenced would automatically be moved to disk when needed, and moved back to tape when no longer required, based on policies set by the administrator. Depending on the analysis, you may only need 1 PB or less of disk to perform the work, which can easily be accomplished with a handful of disk systems, such as IBM DS8300 or IBM XIV, for example.
The rest would be on tape. Let's consider using the IBM TS3500 with [S24 High Density] frames. A singleTS3500 tape library with fifteen of these HD frames could hold 45PB of data, assuming 3:1 compression on 1TB-size 3592 cartridges. You wouldneed 40 (forty) of these libraries to get to the full 1800 PB required, and these could hold even more as higher capacity cartridges are developed. IBM has customers with over 40 tape libraries today (not all with these HD frames, of course), but the dimensions and scale that IBM is capable lies within this scope.
(For LTO fans, fifteen S54 frames would hold 32PB of data, assuming 2:1 compression on 800GB-size LTO-4 cartridges.so you would need 57 libraries instead of 40 in the above example.)
This blended disk-and-tape approach would drastically reduce the floorspace and electricity requirements when compared against all-disk configurations discussed in the post.
People are rediscovering tape in a whole new light. ComputerWorld recently came out with an 11-page Technology Brief titled [The Business Value of Tape Storage],sponsored by Dell. (Note: While Dell is a competitor to IBM for some aspects of their business, they OEM their tape storage systems from IBM, so in that respect, I can refer to them as a technology partner.) Here are some excerpts from the ComputerWorld brief:
For IT managers, the question isnot whether to use tape, but whereand how to best use tape as part of acomprehensive, tiered storage architecture.In the modern storage architecture,tape plays a role not onlyin data backup, but also in long-termarchiving and compliance.
“Long-term archiving is the primaryreason any company shoulduse tape these days,” says MikeKarp, senior analyst at EnterpriseManagement Associates in Boulder,Colo. Companies are increasinglylikely to use disk in conjunctionwith tape for backup, but for long-termarchiving needs, tape remainsunbeatable.
After factoring inacquisition costs of equipment andmedia, as well as electricity and datacenter floor space, Clipper Groupfound that the total cost of archivingsolutions based on SATA disk, theleast expensive disk, was up to 23times more expensive than archivingsolutions involving tape. Calculatingenergy costs for the competing approaches,the costs for disk jumpedto 290 times that of tape.
“Tape isalways the winner anywhere costtrumps anything else,” says Karp.No matter how the cost is figured,tape is less expensive.
Beyond IT familiarity with tape,analysts point to other reasons whyorganizations will likely keep tapein their IT storage infrastructures.Energy savings, for example, is themost recent reason to stick withtape. “The economics of tape arepretty compelling, especially whenyou figure in the cost of power,”Schulz says.
So, whether you are planning for an Exabyte-scale data center, or merely questioning the logic of a disk-for-everything storage approach, you might want to consider tape. It's "green" for the environment, and less expensive on your budget.
Well, it's Tuesday again, and that means more IBM announcements!
Storage Area Network (SAN)
IBM and Cisco announced [three new blades] for the Cisco MDS 9500 seriesdirectors: 24-port 8 Gbps, 48-port 8 Gbps, and 4/44 blended. The 4/44blended has 4 of the faster 8 Gbps ports, and 44 of the 4 Gpbs ports,so that you can auto-negotiate down to 1 Gbps for your older gear, andstill take advantage of the faster 8 Gbps speeds during the transition.
On the Brocade side, IBM announced the newIBM System Storage Data Center Fabric Manager [DCFM] V10 software. This replaces the products formerly known as BrocadeFabric Manager and McData Enterprise Fabric Connection Manager (EFCM).This software can support up to 24 distinct fabrics, up to 9000 ports,including a mix of FCP, FICON, FCIP and iSCSI protocols.
(On a related note, I heard that Microsoft is planning to rename "Windows Vista" to "Windows 7" next year! Like we say here in Tucson,if it ends in "-ista" it is going to fail in the marketplace! Perhaps EMC should rename their storage virtualization product to "In-7"?).
IBM System Storage DR550
IBM announced today that it now supports [RAID 6 onthe DR550] compliance and retention storage system.
There are a few RAID-5 based EMC Centera customers out there who have notyet switched over to the IBM DR550, and now this might be just the littlenudge they need. For long-term retention of regulatory compliance data,RAID-5 doesn't cut it, you need an advanced RAID scheme, such as RAID-6, RAID-DP or RAID-X.
The DR550 provides non-erasable, non-rewriteable (NENR) storage supportto keep retention-managed data on disk and tape media. It supports 1 TBSATA disk drives and 1TB tape cartridges to provide high capacity at lowcost and "green" low energy consumption.
IBM System Storage N series
Several of our disk systems got improved and enhanced. Let's start withthe IBM System Storage N series[hardware and software] enhancements. IBM now offers high-speed 450GB 15K RPM drives. These are Fibre Channel (FC) drives for the EXN4000 expansion drawers, and Serial Attached SCSI (SAS) drives for the entry-levelN3300 and N3600 models.
The "gateway" models now support a variety of functions that were formerlyonly available on the appliance models. This includes Advanced Single Instance Storage (A-SIS), Disk Sanitization, and FlexScale.
A-SIS is IBM's "other" deduplication function, and I talked about this in my post [A-SIS Storage Savings Estimator Tool]. Disk Sanitization will physicallywrite ones and zeros over existing data to eliminate it, what IBM sometimes calls "Data Shredding".
The last feature, FlexScale, might be new for many. It is software toenable to use of the "Performance Accelerator Module" (PAM). The PAM isa PCI-Express card with 16GB on-board RAM that acts as a secondary cachebehind main memory of the N series controller. Depending on the model,you can have one to five of these cards fit into the controller itself,boosting random read performance, metadata access, and write block destage.
IBM System Storage DS5000
IBM's latest entry into the DS family has been hugely successful.In addition to Linux, Windows and AIX, the DS5000 now supports [Novell Netware and Sun Solaris] operating systems.
For infrastructure management, IBM has enhanced the Remote Support Manager [RSM]that supports DS3000 and DS4000 has been extended to support DS5000 as well. This software can monitor up to 50 disk systems, will e-mail alerts to IBM when something goes wrong, and allow IBM to dial in via modem to get more diagnostic information to improve service to the client. Also, the IBM System Storage Productivity Center [SSPC]which now supports the DS8000 and SAN Volume Controller (SVC) has been extended to also support the DS5000.
IBM XIV Storage System
In addition to 1-year and 3-year maintenance agreements, IBM now offers[2-year, 4-year and 5-year] software maintenance agreements.
RFID labels for IBM tape media
IBM 3589 (20-pack of LTO cartridges) and IBM 3599 (20-pack of 3592 cartridges for TS1100 series)now offer [RFID labels]. These labels match the volume serial (VOLSER) with a 216-bit unique identifier and 256 bits of user-defined content. This can help with tape inventory,and to prevent people from walking out of the building with a tape cartridge stuffed in their jacket.
32GB memory stick
While not technically part of the IBM System Storage matrix of offerings, Lenovo announced their new[Essential Memory Key] which holds 32GB of memory and workswith both USB 1.1 and USB 2.0 protocols.
I wish I could say this is it for the IBM announcements for October, given that this is the last Tuesday of the month, but there are three days left, so there might be just a few more!
Well, it's Tuesday again, and that means more announcements from IBM!
In conjunction with IBM's new [System z10 Business Class (BC)] mainframe designed for Small and Medium-sized Businesses (SMB), IBM also announced related storage productenhancements.
Yes, it's alive! Contrary to the FUD you might have read from our competitors, IBM continues to sell thousands and thousands of IBM System Storage DS6800 disk systems, and now enhances them with the optionfor 450GB 15K RPM drives. What is nice about these 450GB drives is that they are as fast or faster* than 300GBdrives, so the typical trade-off between performance and capacity do not apply.
(* I compared Seagate 15.6K (450GB) with 15.5K (300GB) models.
Avg Seek time (Read)
Avg Seek time (Write)
Full Seek time (Read)
Full Seek time (Write)
This may or may not result in application performance improvements, depending on workload pattern. Your mileage may vary.)
Our clients report back that these are incredibly stable systems that they don't have toworry about. This enhancement applies to both the [511/EX1 models] and [522/EX2 models].
Understanding that clients want complete solutions from single vendors, IBM offers synergy between System z and the IBM System Storage DS8000 disk systems. The latest R4.1 microcode upgrade offers two key features onthe various models [2107,
zHPF - High Performance FICON for System z. IBM was able to increase the throughput on 4 Gbps links. For OLTP workloads randomly accessing 4KB blocks, IBM internal tests showed zHPF doubled performance from 13,000 IOPSto 26,000 IOPS per channel. For sequential workloads, such as batch processing, zHPF increased performance 50 percent, from 350 MB/sec to 525 MB/sec.
In February, IBM previewed[IncrementalResync] for z/OS Metro Global Mirror. However, some concepts are better explained with pictures.
One way to set up a 3-site disaster recovery protection is to have your production synchronously mirrored to a second site nearby, and at the same time asynchronously mirrored to a remote location. On the System z, you can have site "A" using synchronous IBM System Storage Metro Mirror over to nearby site "B", and also have site "A" sending data over to site "C" asynchronously using z/OS Global Mirror. This is called "z/OS Metro Global Mirror".
In the past, if the disk system in site A failed, you would switch over to site B, which would have to resend send all the data again to site C to be resynchronized. This is because site B was not tracking what the System Data Mover (SDM) reader had or had not yet processed.
With DS8000 4.1, the "incremental resync" function that, along with using IBM HyperSwap, requires site B to only send and resync the data that was in-flight when the outage occurred. When you compare the difference in sending this limited amount of in-flight data with the traditional complete volume of data, you can see how "Incremental Resync" can resynchronize the data 95% faster, and also greatly decrease your bandwidth requirements. This reduces the risk in case a subsequent outage occurs.
Introduced originally in 1997 as the IBM Virtual Tape Server (VTS), the [IBMSystem Storage TS7700] series supports Grid capabilityto replicate tape image data across locations. Here's a quick recap of today's announcement:
Existing TS7740 can be upgraded up to 9TB of disk cache. New models can have up to 13TB of disk cache.
A new "tape-less" TS7720 that has up to 70TB of disk cache.
Integrate Library Management support. I discussed[IntegratedRemovable Media Manager (IRMM)] before, and this is basically IRMM inside. For those with TS3500 tape libraries,this support eliminates the need for a separate IBM 3953 L05 Library Manager.
TS1130 back-end tape drive support. These are the fastest 1TB drives in the industry, with support of built-in encryption, and now can be used asthe physical tape back-end for the virtual tape TS7740 repository.
While our competitors might be boarding up their windows in preparation for the economic downturn in the USAeconomy, IBM remains generating solid results. San Jose Mercury News has an article that discusses this titled[IBM's 3Q profit strong on global sales].There has never been a better time to buy from, or invest in, IBM!
"IBM announced that Northwest Radiology Network has gone live with a new virtualized enterprise of IBM servers and storage to support its growing medical imaging needs, giving its four locations an enterprise-class infrastructure which enables its doctors to recover medical image reports faster for analysis and enables remote 24x7 access to its medical image report system.
Founded in 1967, Northwest Radiology (NWR) is ranked as one of the largest physician groups in the Indianapolis, Indiana area. With 180 employees who offer the Central Indiana community comprehensive inpatient and outpatient imaging services such as mammography, ultrasonography, CT scans, PET-CT scans, bone density scans and MRIs – the Network had a dramatic need to develop a centralized infrastructure where large amounts of data could be stored and shared. A new data center would benefit the company’s clientele; which includes area hospitals and doctor’s offices serving thousands of patients each year.
Storing more than ten thousand medical imaging reports and radiographic images each month for doctors to analyze, the Network realized it had single points of failure and at one point a critical report server failed. Northwest Radiology turned to IBM and IBM Business Partner Software Information Systems (SIS) for a more efficient solution to prevent any possible downtime in the future.
SIS recommended and installed a virtualized infrastructure with IBM servers and storage as the heart of Northwest Radiology’s Indianapolis data center. By April 2007, Northwest Radiology replaced eight servers and direct attached storage with just two IBM System x3650 servers connected to an IBM System Storage DS3400. Today, the new servers run 15 virtual servers to ensure the availability of their services 24x7. When the business needs it, a new server can be provisioned in just minutes. With a Fibre Channel on the SAN Disk, the DS3400 not only increased performance but also met NWR’s requirement to not have one single point of failure. With three TB of storage capacity, they can meet the demands of increased business well into the future. The systems are also now easily managed from a remote site."
“Uptime is paramount in our business. We selected IBM based on the reliability and flexibility of IBM System x servers and the IBM System Storage DS3400,” said Marty Buening, IT Director, Northwest Radiology Network. “The virtualized infrastructure and the SAN storage array that SIS and IBM brought to the table is improving our service and giving our doctors and staff piece of mind knowing each patient’s medical imaging reports are always available.”
Second, we have [Iowa Health System], a large enterprise with over 19,000 employees, managing four million patients and hundreds of TBs of data.
Here is a 4-minute video on IBM TV from the good folks at Iowa Health System discussing theIBM Grid Medical Archive Solution (GMAS) as part of their information infrastructure for theirPicture Archiving and Communication Systems (PACS) application.
In both cases, IBM technology was able to provide remote access to medical information, making images and patient records available to more doctors, specialists and radiologists. Last January, in my post[Five in Five], IBM had predicted that remote access to healthcare would have an impact over the next five years.
Whether you are a small company or a large one, IBM probably has the right solution for you.
Continuing this week's theme on customer references of IBM's solutions, today I will discussthe success at Kantana Animation Studios.
Here is a 3-minute video from the good folks at Kantana Animation Studios,part of the [Kantana Group].They produced the animated movie [Khan Kluay]using IBM Scale-out File Services (SoFS), a product IBM announced last November 2007.
As a film-maker myself (see this sample [Highlights clip])and active member of the Tucson Film Society,I am pleased to see IBM so greatly involved in the film industry. I've had the pleasure to visit some of theseanimation studios myself and meet with other film-makers at various conferences.
For more details on Kantana's implementation, see the [Case Study]